linux/arch/arm/mach-pxa/trizeps4.c
<<
>>
Prefs
   1/*
   2 *  linux/arch/arm/mach-pxa/trizeps4.c
   3 *
   4 *  Support for the Keith und Koep Trizeps4 Module Platform.
   5 *
   6 *  Author:     Jürgen Schindele
   7 *  Created:    20 02, 2006
   8 *  Copyright:  Jürgen Schindele
   9 *
  10 *  This program is free software; you can redistribute it and/or modify
  11 *  it under the terms of the GNU General Public License version 2 as
  12 *  published by the Free Software Foundation.
  13 */
  14
  15#include <linux/init.h>
  16#include <linux/kernel.h>
  17#include <linux/platform_device.h>
  18#include <linux/sysdev.h>
  19#include <linux/interrupt.h>
  20#include <linux/sched.h>
  21#include <linux/bitops.h>
  22#include <linux/fb.h>
  23#include <linux/ioport.h>
  24#include <linux/delay.h>
  25#include <linux/gpio.h>
  26#include <linux/dm9000.h>
  27#include <linux/mtd/physmap.h>
  28#include <linux/mtd/partitions.h>
  29
  30#include <asm/types.h>
  31#include <asm/setup.h>
  32#include <asm/memory.h>
  33#include <asm/mach-types.h>
  34#include <asm/irq.h>
  35#include <asm/sizes.h>
  36
  37#include <asm/mach/arch.h>
  38#include <asm/mach/map.h>
  39#include <asm/mach/irq.h>
  40#include <asm/mach/flash.h>
  41
  42#include <mach/pxa27x.h>
  43#include <mach/pxa2xx_spi.h>
  44#include <mach/trizeps4.h>
  45#include <mach/audio.h>
  46#include <mach/pxafb.h>
  47#include <mach/mmc.h>
  48#include <mach/irda.h>
  49#include <mach/ohci.h>
  50#include <plat/i2c.h>
  51
  52#include "generic.h"
  53#include "devices.h"
  54
  55/*      comment out the following line if you want to use the
  56 *      Standard UART from PXA for serial / irda transmission
  57 *      and acivate it if you have status leds connected */
  58#define STATUS_LEDS_ON_STUART_PINS 1
  59
  60/*****************************************************************************
  61 * MultiFunctionPins of CPU
  62 *****************************************************************************/
  63static unsigned long trizeps4_pin_config[] __initdata = {
  64        /* Chip Selects */
  65        GPIO15_nCS_1,           /* DiskOnChip CS */
  66        GPIO93_GPIO,            /* TRIZEPS4_DOC_IRQ */
  67        GPIO94_GPIO,            /* DOC lock */
  68
  69        GPIO78_nCS_2,           /* DM9000 CS */
  70        GPIO101_GPIO,           /* TRIZEPS4_ETH_IRQ */
  71
  72        GPIO79_nCS_3,           /* Logic CS */
  73        GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,       /* Logic irq */
  74
  75        /* LCD - 16bpp Active TFT */
  76        GPIO58_LCD_LDD_0,
  77        GPIO59_LCD_LDD_1,
  78        GPIO60_LCD_LDD_2,
  79        GPIO61_LCD_LDD_3,
  80        GPIO62_LCD_LDD_4,
  81        GPIO63_LCD_LDD_5,
  82        GPIO64_LCD_LDD_6,
  83        GPIO65_LCD_LDD_7,
  84        GPIO66_LCD_LDD_8,
  85        GPIO67_LCD_LDD_9,
  86        GPIO68_LCD_LDD_10,
  87        GPIO69_LCD_LDD_11,
  88        GPIO70_LCD_LDD_12,
  89        GPIO71_LCD_LDD_13,
  90        GPIO72_LCD_LDD_14,
  91        GPIO73_LCD_LDD_15,
  92        GPIO74_LCD_FCLK,
  93        GPIO75_LCD_LCLK,
  94        GPIO76_LCD_PCLK,
  95        GPIO77_LCD_BIAS,
  96
  97        /* UART */
  98        GPIO9_FFUART_CTS,
  99        GPIO10_FFUART_DCD,
 100        GPIO16_FFUART_TXD,
 101        GPIO33_FFUART_DSR,
 102        GPIO38_FFUART_RI,
 103        GPIO82_FFUART_DTR,
 104        GPIO83_FFUART_RTS,
 105        GPIO96_FFUART_RXD,
 106
 107        GPIO42_BTUART_RXD,
 108        GPIO43_BTUART_TXD,
 109        GPIO44_BTUART_CTS,
 110        GPIO45_BTUART_RTS,
 111#ifdef STATUS_LEDS_ON_STUART_PINS
 112        GPIO46_GPIO,
 113        GPIO47_GPIO,
 114#else
 115        GPIO46_STUART_RXD,
 116        GPIO47_STUART_TXD,
 117#endif
 118        /* PCMCIA */
 119        GPIO11_GPIO,                    /* TRIZEPS4_CD_IRQ */
 120        GPIO13_GPIO,                    /* TRIZEPS4_READY_NINT */
 121        GPIO48_nPOE,
 122        GPIO49_nPWE,
 123        GPIO50_nPIOR,
 124        GPIO51_nPIOW,
 125        GPIO54_nPCE_2,
 126        GPIO55_nPREG,
 127        GPIO56_nPWAIT,
 128        GPIO57_nIOIS16,
 129        GPIO102_nPCE_1,
 130        GPIO104_PSKTSEL,
 131
 132        /* MultiMediaCard */
 133        GPIO32_MMC_CLK,
 134        GPIO92_MMC_DAT_0,
 135        GPIO109_MMC_DAT_1,
 136        GPIO110_MMC_DAT_2,
 137        GPIO111_MMC_DAT_3,
 138        GPIO112_MMC_CMD,
 139        GPIO12_GPIO,                    /* TRIZEPS4_MMC_IRQ */
 140
 141        /* USB OHCI */
 142        GPIO88_USBH1_PWR,               /* USBHPWR1 */
 143        GPIO89_USBH1_PEN,               /* USBHPEN1 */
 144
 145        /* I2C */
 146        GPIO117_I2C_SCL,
 147        GPIO118_I2C_SDA,
 148};
 149
 150static unsigned long trizeps4wl_pin_config[] __initdata = {
 151        /* SSP 2 */
 152        GPIO14_SSP2_SFRM,
 153        GPIO19_SSP2_SCLK,
 154        GPIO53_GPIO,                    /* TRIZEPS4_SPI_IRQ */
 155        GPIO86_SSP2_RXD,
 156        GPIO87_SSP2_TXD,
 157};
 158
 159/****************************************************************************
 160 * ONBOARD FLASH
 161 ****************************************************************************/
 162static struct mtd_partition trizeps4_partitions[] = {
 163        {
 164                .name =         "Bootloader",
 165                .offset =       0x00000000,
 166                .size =         0x00040000,
 167                .mask_flags =   MTD_WRITEABLE  /* force read-only */
 168        }, {
 169                .name =         "Backup",
 170                .offset =       0x00040000,
 171                .size =         0x00040000,
 172        }, {
 173                .name =         "Image",
 174                .offset =       0x00080000,
 175                .size =         0x01080000,
 176        }, {
 177                .name =         "IPSM",
 178                .offset =       0x01100000,
 179                .size =         0x00e00000,
 180        }, {
 181                .name =         "Registry",
 182                .offset =       0x01f00000,
 183                .size =         MTDPART_SIZ_FULL,
 184        }
 185};
 186
 187static struct physmap_flash_data trizeps4_flash_data[] = {
 188        {
 189                .width          = 4,                    /* bankwidth in bytes */
 190                .parts          = trizeps4_partitions,
 191                .nr_parts       = ARRAY_SIZE(trizeps4_partitions)
 192        }
 193};
 194
 195static struct resource flash_resource = {
 196        .start  = PXA_CS0_PHYS,
 197        .end    = PXA_CS0_PHYS + SZ_32M - 1,
 198        .flags  = IORESOURCE_MEM,
 199};
 200
 201static struct platform_device flash_device = {
 202        .name           = "physmap-flash",
 203        .id             = 0,
 204        .dev = {
 205                .platform_data = trizeps4_flash_data,
 206        },
 207        .resource = &flash_resource,
 208        .num_resources = 1,
 209};
 210
 211/****************************************************************************
 212 * DAVICOM DM9000 Ethernet
 213 ****************************************************************************/
 214static struct resource dm9000_resources[] = {
 215        [0] = {
 216                .start  = TRIZEPS4_ETH_PHYS+0x300,
 217                .end    = TRIZEPS4_ETH_PHYS+0x400-1,
 218                .flags  = IORESOURCE_MEM,
 219        },
 220        [1] = {
 221                .start  = TRIZEPS4_ETH_PHYS+0x8300,
 222                .end    = TRIZEPS4_ETH_PHYS+0x8400-1,
 223                .flags  = IORESOURCE_MEM,
 224        },
 225        [2] = {
 226                .start  = TRIZEPS4_ETH_IRQ,
 227                .end    = TRIZEPS4_ETH_IRQ,
 228                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 229        },
 230};
 231
 232static struct dm9000_plat_data tri_dm9000_platdata = {
 233        .flags          = DM9000_PLATF_32BITONLY,
 234};
 235
 236static struct platform_device dm9000_device = {
 237        .name           = "dm9000",
 238        .id             = -1,
 239        .num_resources  = ARRAY_SIZE(dm9000_resources),
 240        .resource       = dm9000_resources,
 241        .dev            = {
 242                .platform_data = &tri_dm9000_platdata,
 243        }
 244};
 245
 246/****************************************************************************
 247 * LED's on GPIO pins of PXA
 248 ****************************************************************************/
 249static struct gpio_led trizeps4_led[] = {
 250#ifdef STATUS_LEDS_ON_STUART_PINS
 251        {
 252                .name = "led0:orange:heartbeat",        /* */
 253                .default_trigger = "heartbeat",
 254                .gpio = GPIO_HEARTBEAT_LED,
 255                .active_low = 1,
 256        },
 257        {
 258                .name = "led1:yellow:cpubusy",          /* */
 259                .default_trigger = "cpu-busy",
 260                .gpio = GPIO_SYS_BUSY_LED,
 261                .active_low = 1,
 262        },
 263#endif
 264};
 265
 266static struct gpio_led_platform_data trizeps4_led_data = {
 267        .leds           = trizeps4_led,
 268        .num_leds       = ARRAY_SIZE(trizeps4_led),
 269};
 270
 271static struct platform_device leds_devices = {
 272        .name           = "leds-gpio",
 273        .id             = -1,
 274        .dev            = {
 275                .platform_data  = &trizeps4_led_data,
 276        },
 277};
 278
 279static struct platform_device *trizeps4_devices[] __initdata = {
 280        &flash_device,
 281        &dm9000_device,
 282        &leds_devices,
 283};
 284
 285static struct platform_device *trizeps4wl_devices[] __initdata = {
 286        &flash_device,
 287        &leds_devices,
 288};
 289
 290static short trizeps_conxs_bcr;
 291
 292/* PCCARD power switching supports only 3,3V */
 293void board_pcmcia_power(int power)
 294{
 295        if (power) {
 296                /* switch power on, put in reset and enable buffers */
 297                trizeps_conxs_bcr |= power;
 298                trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 299                trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
 300                BCR_writew(trizeps_conxs_bcr);
 301                /* wait a little */
 302                udelay(2000);
 303                /* take reset away */
 304                trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
 305                BCR_writew(trizeps_conxs_bcr);
 306                udelay(2000);
 307        } else {
 308                /* put in reset */
 309                trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 310                BCR_writew(trizeps_conxs_bcr);
 311                udelay(1000);
 312                /* switch power off */
 313                trizeps_conxs_bcr &= ~0xf;
 314                BCR_writew(trizeps_conxs_bcr);
 315        }
 316        pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
 317                        trizeps_conxs_bcr);
 318}
 319EXPORT_SYMBOL(board_pcmcia_power);
 320
 321/* backlight power switching for LCD panel */
 322static void board_backlight_power(int on)
 323{
 324        if (on)
 325                trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
 326        else
 327                trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
 328
 329        pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
 330                        trizeps_conxs_bcr);
 331        BCR_writew(trizeps_conxs_bcr);
 332}
 333
 334/* a I2C based RTC is known on CONXS board */
 335static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
 336        { I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
 337};
 338
 339/****************************************************************************
 340 * MMC card slot external to module
 341 ****************************************************************************/
 342static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 343                void *data)
 344{
 345        int err;
 346
 347        err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
 348                IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
 349                "MMC card detect", data);
 350        if (err) {
 351                printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
 352                                                "MMC card detect IRQ\n");
 353                return -1;
 354        }
 355        return 0;
 356}
 357
 358static void trizeps4_mci_exit(struct device *dev, void *data)
 359{
 360        free_irq(TRIZEPS4_MMC_IRQ, data);
 361}
 362
 363static struct pxamci_platform_data trizeps4_mci_platform_data = {
 364        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 365        .detect_delay   = 1,
 366        .init           = trizeps4_mci_init,
 367        .exit           = trizeps4_mci_exit,
 368        .get_ro         = NULL, /* write-protection not supported */
 369        .setpower       = NULL, /* power-switching not supported */
 370        .gpio_card_detect = -1,
 371        .gpio_card_ro   = -1,
 372        .gpio_power     = -1,
 373};
 374
 375/****************************************************************************
 376 * IRDA mode switching on stuart
 377 ****************************************************************************/
 378#ifndef STATUS_LEDS_ON_STUART_PINS
 379static short trizeps_conxs_ircr;
 380
 381static int trizeps4_irda_startup(struct device *dev)
 382{
 383        trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
 384        IRCR_writew(trizeps_conxs_ircr);
 385        return 0;
 386}
 387
 388static void trizeps4_irda_shutdown(struct device *dev)
 389{
 390        trizeps_conxs_ircr |= ConXS_IRCR_SD;
 391        IRCR_writew(trizeps_conxs_ircr);
 392}
 393
 394static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 395{
 396        unsigned long flags;
 397
 398        local_irq_save(flags);
 399        /* Switch mode */
 400        if (mode & IR_SIRMODE)
 401                trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
 402        else if (mode & IR_FIRMODE)
 403                trizeps_conxs_ircr |= ConXS_IRCR_MODE;  /* Fast mode */
 404
 405        /* Switch power */
 406        if (mode & IR_OFF)
 407                trizeps_conxs_ircr |= ConXS_IRCR_SD;
 408        else
 409                trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
 410
 411        IRCR_writew(trizeps_conxs_ircr);
 412        local_irq_restore(flags);
 413
 414        pxa2xx_transceiver_mode(dev, mode);
 415}
 416
 417static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
 418        .gpio_pwdown            = -1,
 419        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
 420        .transceiver_mode       = trizeps4_irda_transceiver_mode,
 421        .startup                = trizeps4_irda_startup,
 422        .shutdown               = trizeps4_irda_shutdown,
 423};
 424#endif
 425
 426/****************************************************************************
 427 * OHCI USB port
 428 ****************************************************************************/
 429static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
 430        .port_mode      = PMM_PERPORT_MODE,
 431        .flags          = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 432};
 433
 434static struct map_desc trizeps4_io_desc[] __initdata = {
 435        {       /* ConXS CFSR */
 436                .virtual        = TRIZEPS4_CFSR_VIRT,
 437                .pfn            = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
 438                .length         = 0x00001000,
 439                .type           = MT_DEVICE
 440        },
 441        {       /* ConXS BCR */
 442                .virtual        = TRIZEPS4_BOCR_VIRT,
 443                .pfn            = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
 444                .length         = 0x00001000,
 445                .type           = MT_DEVICE
 446        },
 447        {       /* ConXS IRCR */
 448                .virtual        = TRIZEPS4_IRCR_VIRT,
 449                .pfn            = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
 450                .length         = 0x00001000,
 451                .type           = MT_DEVICE
 452        },
 453        {       /* ConXS DCR */
 454                .virtual        = TRIZEPS4_DICR_VIRT,
 455                .pfn            = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
 456                .length         = 0x00001000,
 457                .type           = MT_DEVICE
 458        },
 459        {       /* ConXS UPSR */
 460                .virtual        = TRIZEPS4_UPSR_VIRT,
 461                .pfn            = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
 462                .length         = 0x00001000,
 463                .type           = MT_DEVICE
 464        }
 465};
 466
 467static struct pxafb_mode_info sharp_lcd_mode = {
 468        .pixclock       = 78000,
 469        .xres           = 640,
 470        .yres           = 480,
 471        .bpp            = 8,
 472        .hsync_len      = 4,
 473        .left_margin    = 4,
 474        .right_margin   = 4,
 475        .vsync_len      = 2,
 476        .upper_margin   = 0,
 477        .lower_margin   = 0,
 478        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 479        .cmap_greyscale = 0,
 480};
 481
 482static struct pxafb_mach_info sharp_lcd = {
 483        .modes          = &sharp_lcd_mode,
 484        .num_modes      = 1,
 485        .lcd_conn       = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
 486        .cmap_inverse   = 0,
 487        .cmap_static    = 0,
 488        .pxafb_backlight_power = board_backlight_power,
 489};
 490
 491static struct pxafb_mode_info toshiba_lcd_mode = {
 492        .pixclock       = 39720,
 493        .xres           = 640,
 494        .yres           = 480,
 495        .bpp            = 8,
 496        .hsync_len      = 63,
 497        .left_margin    = 12,
 498        .right_margin   = 12,
 499        .vsync_len      = 4,
 500        .upper_margin   = 32,
 501        .lower_margin   = 10,
 502        .sync           = 0,
 503        .cmap_greyscale = 0,
 504};
 505
 506static struct pxafb_mach_info toshiba_lcd = {
 507        .modes          = &toshiba_lcd_mode,
 508        .num_modes      = 1,
 509        .lcd_conn       = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
 510        .cmap_inverse   = 0,
 511        .cmap_static    = 0,
 512        .pxafb_backlight_power = board_backlight_power,
 513};
 514
 515static void __init trizeps4_init(void)
 516{
 517        pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
 518        if (machine_is_trizeps4wl()) {
 519                pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
 520                platform_add_devices(trizeps4wl_devices,
 521                                        ARRAY_SIZE(trizeps4wl_devices));
 522        } else {
 523                platform_add_devices(trizeps4_devices,
 524                                        ARRAY_SIZE(trizeps4_devices));
 525        }
 526
 527        if (0)  /* dont know how to determine LCD */
 528                set_pxa_fb_info(&sharp_lcd);
 529        else
 530                set_pxa_fb_info(&toshiba_lcd);
 531
 532        pxa_set_mci_info(&trizeps4_mci_platform_data);
 533#ifndef STATUS_LEDS_ON_STUART_PINS
 534        pxa_set_ficp_info(&trizeps4_ficp_platform_data);
 535#endif
 536        pxa_set_ohci_info(&trizeps4_ohci_platform_data);
 537        pxa_set_ac97_info(NULL);
 538        pxa_set_i2c_info(NULL);
 539        i2c_register_board_info(0, trizeps4_i2c_devices,
 540                                        ARRAY_SIZE(trizeps4_i2c_devices));
 541
 542#ifdef CONFIG_IDE_PXA_CF
 543        /* if boot direct from compact flash dont disable power */
 544        trizeps_conxs_bcr = 0x0009;
 545#else
 546        /* this is the reset value */
 547        trizeps_conxs_bcr = 0x00A0;
 548#endif
 549        BCR_writew(trizeps_conxs_bcr);
 550        board_backlight_power(1);
 551}
 552
 553static void __init trizeps4_map_io(void)
 554{
 555        pxa_map_io();
 556        iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 557
 558        if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
 559                /* if flash is 16 bit wide its a Trizeps4 WL */
 560                __machine_arch_type = MACH_TYPE_TRIZEPS4WL;
 561                trizeps4_flash_data[0].width = 2;
 562        } else {
 563                /* if flash is 32 bit wide its a Trizeps4 */
 564                __machine_arch_type = MACH_TYPE_TRIZEPS4;
 565                trizeps4_flash_data[0].width = 4;
 566        }
 567}
 568
 569MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 570        /* MAINTAINER("Jürgen Schindele") */
 571        .phys_io        = 0x40000000,
 572        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 573        .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
 574        .init_machine   = trizeps4_init,
 575        .map_io         = trizeps4_map_io,
 576        .init_irq       = pxa27x_init_irq,
 577        .timer          = &pxa_timer,
 578MACHINE_END
 579
 580MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 581        /* MAINTAINER("Jürgen Schindele") */
 582        .phys_io        = 0x40000000,
 583        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 584        .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
 585        .init_machine   = trizeps4_init,
 586        .map_io         = trizeps4_map_io,
 587        .init_irq       = pxa27x_init_irq,
 588        .timer          = &pxa_timer,
 589MACHINE_END
 590