linux/arch/arm/mach-pxa/zylonite.c
<<
>>
Prefs
   1/*
   2 * linux/arch/arm/mach-pxa/zylonite.c
   3 *
   4 * Support for the PXA3xx Development Platform (aka Zylonite)
   5 *
   6 * Copyright (C) 2006 Marvell International Ltd.
   7 *
   8 * 2007-09-04: eric miao <eric.miao@marvell.com>
   9 *             rewrite to align with latest kernel
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License version 2 as
  13 * published by the Free Software Foundation.
  14 */
  15
  16#include <linux/module.h>
  17#include <linux/kernel.h>
  18#include <linux/interrupt.h>
  19#include <linux/init.h>
  20#include <linux/platform_device.h>
  21#include <linux/gpio.h>
  22#include <linux/pwm_backlight.h>
  23#include <linux/smc91x.h>
  24
  25#include <asm/mach-types.h>
  26#include <asm/mach/arch.h>
  27#include <mach/hardware.h>
  28#include <mach/audio.h>
  29#include <mach/pxafb.h>
  30#include <mach/zylonite.h>
  31#include <mach/mmc.h>
  32#include <mach/ohci.h>
  33#include <mach/pxa27x_keypad.h>
  34#include <mach/pxa3xx_nand.h>
  35
  36#include "devices.h"
  37#include "generic.h"
  38
  39#define MAX_SLOTS       3
  40struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
  41
  42int gpio_eth_irq;
  43int gpio_debug_led1;
  44int gpio_debug_led2;
  45
  46int wm9713_irq;
  47
  48int lcd_id;
  49int lcd_orientation;
  50
  51static struct resource smc91x_resources[] = {
  52        [0] = {
  53                .start  = ZYLONITE_ETH_PHYS + 0x300,
  54                .end    = ZYLONITE_ETH_PHYS + 0xfffff,
  55                .flags  = IORESOURCE_MEM,
  56        },
  57        [1] = {
  58                .start  = -1,   /* for run-time assignment */
  59                .end    = -1,
  60                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
  61        }
  62};
  63
  64static struct smc91x_platdata zylonite_smc91x_info = {
  65        .flags  = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
  66                  SMC91X_NOWAIT | SMC91X_USE_DMA,
  67};
  68
  69static struct platform_device smc91x_device = {
  70        .name           = "smc91x",
  71        .id             = 0,
  72        .num_resources  = ARRAY_SIZE(smc91x_resources),
  73        .resource       = smc91x_resources,
  74        .dev            = {
  75                .platform_data = &zylonite_smc91x_info,
  76        },
  77};
  78
  79#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
  80static struct gpio_led zylonite_debug_leds[] = {
  81        [0] = {
  82                .name                   = "zylonite:yellow:1",
  83                .default_trigger        = "heartbeat",
  84        },
  85        [1] = {
  86                .name                   = "zylonite:yellow:2",
  87                .default_trigger        = "default-on",
  88        },
  89};
  90
  91static struct gpio_led_platform_data zylonite_debug_leds_info = {
  92        .leds           = zylonite_debug_leds,
  93        .num_leds       = ARRAY_SIZE(zylonite_debug_leds),
  94};
  95
  96static struct platform_device zylonite_device_leds = {
  97        .name           = "leds-gpio",
  98        .id             = -1,
  99        .dev            = {
 100                .platform_data = &zylonite_debug_leds_info,
 101        }
 102};
 103
 104static void __init zylonite_init_leds(void)
 105{
 106        zylonite_debug_leds[0].gpio = gpio_debug_led1;
 107        zylonite_debug_leds[1].gpio = gpio_debug_led2;
 108
 109        platform_device_register(&zylonite_device_leds);
 110}
 111#else
 112static inline void zylonite_init_leds(void) {}
 113#endif
 114
 115#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 116static struct platform_pwm_backlight_data zylonite_backlight_data = {
 117        .pwm_id         = 3,
 118        .max_brightness = 100,
 119        .dft_brightness = 100,
 120        .pwm_period_ns  = 10000,
 121};
 122
 123static struct platform_device zylonite_backlight_device = {
 124        .name           = "pwm-backlight",
 125        .dev            = {
 126                .parent = &pxa27x_device_pwm1.dev,
 127                .platform_data  = &zylonite_backlight_data,
 128        },
 129};
 130
 131static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
 132        .pixclock               = 110000,
 133        .xres                   = 240,
 134        .yres                   = 320,
 135        .bpp                    = 16,
 136        .hsync_len              = 4,
 137        .left_margin            = 6,
 138        .right_margin           = 4,
 139        .vsync_len              = 2,
 140        .upper_margin           = 2,
 141        .lower_margin           = 3,
 142        .sync                   = FB_SYNC_VERT_HIGH_ACT,
 143};
 144
 145static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
 146        .pixclock               = 50000,
 147        .xres                   = 640,
 148        .yres                   = 480,
 149        .bpp                    = 16,
 150        .hsync_len              = 1,
 151        .left_margin            = 0x9f,
 152        .right_margin           = 1,
 153        .vsync_len              = 44,
 154        .upper_margin           = 0,
 155        .lower_margin           = 0,
 156        .sync                   = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
 157};
 158
 159static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
 160        .num_modes              = 1,
 161        .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 162};
 163
 164static struct pxafb_mode_info sharp_ls037_modes[] = {
 165        [0] = {
 166                .pixclock       = 158000,
 167                .xres           = 240,
 168                .yres           = 320,
 169                .bpp            = 16,
 170                .hsync_len      = 4,
 171                .left_margin    = 39,
 172                .right_margin   = 39,
 173                .vsync_len      = 1,
 174                .upper_margin   = 2,
 175                .lower_margin   = 3,
 176                .sync           = 0,
 177        },
 178        [1] = {
 179                .pixclock       = 39700,
 180                .xres           = 480,
 181                .yres           = 640,
 182                .bpp            = 16,
 183                .hsync_len      = 8,
 184                .left_margin    = 81,
 185                .right_margin   = 81,
 186                .vsync_len      = 1,
 187                .upper_margin   = 2,
 188                .lower_margin   = 7,
 189                .sync           = 0,
 190        },
 191};
 192
 193static struct pxafb_mach_info zylonite_sharp_lcd_info = {
 194        .modes                  = sharp_ls037_modes,
 195        .num_modes              = 2,
 196        .lcd_conn               = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 197};
 198
 199static void __init zylonite_init_lcd(void)
 200{
 201        platform_device_register(&zylonite_backlight_device);
 202
 203        if (lcd_id & 0x20) {
 204                set_pxa_fb_info(&zylonite_sharp_lcd_info);
 205                return;
 206        }
 207
 208        /* legacy LCD panels, it would be handy here if LCD panel type can
 209         * be decided at run-time
 210         */
 211        if (1)
 212                zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
 213        else
 214                zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
 215
 216        set_pxa_fb_info(&zylonite_toshiba_lcd_info);
 217}
 218#else
 219static inline void zylonite_init_lcd(void) {}
 220#endif
 221
 222#if defined(CONFIG_MMC)
 223static int zylonite_mci_ro(struct device *dev)
 224{
 225        struct platform_device *pdev = to_platform_device(dev);
 226
 227        return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
 228}
 229
 230static int zylonite_mci_init(struct device *dev,
 231                             irq_handler_t zylonite_detect_int,
 232                             void *data)
 233{
 234        struct platform_device *pdev = to_platform_device(dev);
 235        int err, cd_irq, gpio_cd, gpio_wp;
 236
 237        cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
 238        gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
 239        gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
 240
 241        /*
 242         * setup GPIO for Zylonite MMC controller
 243         */
 244        err = gpio_request(gpio_cd, "mmc card detect");
 245        if (err)
 246                goto err_request_cd;
 247        gpio_direction_input(gpio_cd);
 248
 249        err = gpio_request(gpio_wp, "mmc write protect");
 250        if (err)
 251                goto err_request_wp;
 252        gpio_direction_input(gpio_wp);
 253
 254        err = request_irq(cd_irq, zylonite_detect_int,
 255                          IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 256                          "MMC card detect", data);
 257        if (err) {
 258                printk(KERN_ERR "%s: MMC/SD/SDIO: "
 259                                "can't request card detect IRQ\n", __func__);
 260                goto err_request_irq;
 261        }
 262
 263        return 0;
 264
 265err_request_irq:
 266        gpio_free(gpio_wp);
 267err_request_wp:
 268        gpio_free(gpio_cd);
 269err_request_cd:
 270        return err;
 271}
 272
 273static void zylonite_mci_exit(struct device *dev, void *data)
 274{
 275        struct platform_device *pdev = to_platform_device(dev);
 276        int cd_irq, gpio_cd, gpio_wp;
 277
 278        cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
 279        gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
 280        gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
 281
 282        free_irq(cd_irq, data);
 283        gpio_free(gpio_cd);
 284        gpio_free(gpio_wp);
 285}
 286
 287static struct pxamci_platform_data zylonite_mci_platform_data = {
 288        .detect_delay   = 20,
 289        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 290        .init           = zylonite_mci_init,
 291        .exit           = zylonite_mci_exit,
 292        .get_ro         = zylonite_mci_ro,
 293        .gpio_card_detect = -1,
 294        .gpio_card_ro   = -1,
 295        .gpio_power     = -1,
 296};
 297
 298static struct pxamci_platform_data zylonite_mci2_platform_data = {
 299        .detect_delay   = 20,
 300        .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 301};
 302
 303static void __init zylonite_init_mmc(void)
 304{
 305        pxa_set_mci_info(&zylonite_mci_platform_data);
 306        pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
 307        if (cpu_is_pxa310())
 308                pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
 309}
 310#else
 311static inline void zylonite_init_mmc(void) {}
 312#endif
 313
 314#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 315static unsigned int zylonite_matrix_key_map[] = {
 316        /* KEY(row, col, key_code) */
 317        KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
 318        KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
 319        KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
 320        KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
 321        KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
 322        KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
 323        KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
 324
 325        KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
 326        KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
 327        KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
 328
 329        KEY(4, 5, KEY_SPACE),
 330        KEY(5, 3, KEY_KPASTERISK),      /* * */
 331        KEY(5, 4, KEY_KPDOT),           /* #" */
 332
 333        KEY(0, 7, KEY_UP),
 334        KEY(1, 7, KEY_DOWN),
 335        KEY(2, 7, KEY_LEFT),
 336        KEY(3, 7, KEY_RIGHT),
 337        KEY(2, 6, KEY_HOME),
 338        KEY(3, 6, KEY_END),
 339        KEY(6, 4, KEY_DELETE),
 340        KEY(6, 6, KEY_BACK),
 341        KEY(6, 3, KEY_CAPSLOCK),        /* KEY_LEFTSHIFT), */
 342
 343        KEY(4, 6, KEY_ENTER),           /* scroll push */
 344        KEY(5, 7, KEY_ENTER),           /* keypad action */
 345
 346        KEY(0, 4, KEY_EMAIL),
 347        KEY(5, 6, KEY_SEND),
 348        KEY(4, 0, KEY_CALENDAR),
 349        KEY(7, 6, KEY_RECORD),
 350        KEY(6, 7, KEY_VOLUMEUP),
 351        KEY(7, 7, KEY_VOLUMEDOWN),
 352
 353        KEY(0, 6, KEY_F22),     /* soft1 */
 354        KEY(1, 6, KEY_F23),     /* soft2 */
 355        KEY(0, 3, KEY_AUX),     /* contact */
 356};
 357
 358static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
 359        .matrix_key_rows        = 8,
 360        .matrix_key_cols        = 8,
 361        .matrix_key_map         = zylonite_matrix_key_map,
 362        .matrix_key_map_size    = ARRAY_SIZE(zylonite_matrix_key_map),
 363
 364        .enable_rotary0         = 1,
 365        .rotary0_up_key         = KEY_UP,
 366        .rotary0_down_key       = KEY_DOWN,
 367
 368        .debounce_interval      = 30,
 369};
 370
 371static void __init zylonite_init_keypad(void)
 372{
 373        pxa_set_keypad_info(&zylonite_keypad_info);
 374}
 375#else
 376static inline void zylonite_init_keypad(void) {}
 377#endif
 378
 379#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 380static struct mtd_partition zylonite_nand_partitions[] = {
 381        [0] = {
 382                .name        = "Bootloader",
 383                .offset      = 0,
 384                .size        = 0x060000,
 385                .mask_flags  = MTD_WRITEABLE, /* force read-only */
 386        },
 387        [1] = {
 388                .name        = "Kernel",
 389                .offset      = 0x060000,
 390                .size        = 0x200000,
 391                .mask_flags  = MTD_WRITEABLE, /* force read-only */
 392        },
 393        [2] = {
 394                .name        = "Filesystem",
 395                .offset      = 0x0260000,
 396                .size        = 0x3000000,     /* 48M - rootfs */
 397        },
 398        [3] = {
 399                .name        = "MassStorage",
 400                .offset      = 0x3260000,
 401                .size        = 0x3d40000,
 402        },
 403        [4] = {
 404                .name        = "BBT",
 405                .offset      = 0x6FA0000,
 406                .size        = 0x80000,
 407                .mask_flags  = MTD_WRITEABLE,  /* force read-only */
 408        },
 409        /* NOTE: we reserve some blocks at the end of the NAND flash for
 410         * bad block management, and the max number of relocation blocks
 411         * differs on different platforms. Please take care with it when
 412         * defining the partition table.
 413         */
 414};
 415
 416static struct pxa3xx_nand_platform_data zylonite_nand_info = {
 417        .enable_arbiter = 1,
 418        .parts          = zylonite_nand_partitions,
 419        .nr_parts       = ARRAY_SIZE(zylonite_nand_partitions),
 420};
 421
 422static void __init zylonite_init_nand(void)
 423{
 424        pxa3xx_set_nand_info(&zylonite_nand_info);
 425}
 426#else
 427static inline void zylonite_init_nand(void) {}
 428#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
 429
 430#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 431static struct pxaohci_platform_data zylonite_ohci_info = {
 432        .port_mode      = PMM_PERPORT_MODE,
 433        .flags          = ENABLE_PORT1 | ENABLE_PORT2 |
 434                          POWER_CONTROL_LOW | POWER_SENSE_LOW,
 435};
 436
 437static void __init zylonite_init_ohci(void)
 438{
 439        pxa_set_ohci_info(&zylonite_ohci_info);
 440}
 441#else
 442static inline void zylonite_init_ohci(void) {}
 443#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
 444
 445static void __init zylonite_init(void)
 446{
 447        /* board-processor specific initialization */
 448        zylonite_pxa300_init();
 449        zylonite_pxa320_init();
 450
 451        /*
 452         * Note: We depend that the bootloader set
 453         * the correct value to MSC register for SMC91x.
 454         */
 455        smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
 456        smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
 457        platform_device_register(&smc91x_device);
 458
 459        pxa_set_ac97_info(NULL);
 460        zylonite_init_lcd();
 461        zylonite_init_mmc();
 462        zylonite_init_keypad();
 463        zylonite_init_nand();
 464        zylonite_init_leds();
 465        zylonite_init_ohci();
 466}
 467
 468MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 469        .phys_io        = 0x40000000,
 470        .boot_params    = 0xa0000100,
 471        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 472        .map_io         = pxa_map_io,
 473        .init_irq       = pxa3xx_init_irq,
 474        .timer          = &pxa_timer,
 475        .init_machine   = zylonite_init,
 476MACHINE_END
 477