/* linux/arch/arm/mach-s3c2412/cpu-freq.c
 *
 * Copyright 2008 Simtec Electronics
 *      http://armlinux.simtec.co.uk/
 *      Ben Dooks <ben@simtec.co.uk>
 *
 * S3C2412 CPU Frequency scalling
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
#include <linux/sysdev.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include <mach/regs-clock.h>
#include <mach/regs-s3c2412-mem.h>

#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/cpu-freq-core.h>

/* our clock resources. */
static struct clk *xtal;
static struct clk *fclk;
static struct clk *hclk;
static struct clk *armclk;

/* HDIV: 1, 2, 3, 4, 6, 8 */

static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
{
        unsigned int hdiv, pdiv, armdiv, dvs;
        unsigned long hclk, fclk, armclk, armdiv_clk;
        unsigned long hclk_max;

        fclk = cfg->freq.fclk;
        armclk = cfg->freq.armclk;
        hclk_max = cfg->max.hclk;

        /* We can't run hclk above armclk as at the best we have to
         * have armclk and hclk in dvs mode. */

        if (hclk_max > armclk)
                hclk_max = armclk;

        s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
                     __func__, fclk, armclk, hclk_max);
        s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
                     __func__, cfg->freq.fclk, cfg->freq.armclk,
                     cfg->freq.hclk, cfg->freq.pclk);

        armdiv = fclk / armclk;

        if (armdiv < 1)
                armdiv = 1;
        if (armdiv > 2)
                armdiv = 2;

        cfg->divs.arm_divisor = armdiv;
        armdiv_clk = fclk / armdiv;

        hdiv = armdiv_clk / hclk_max;
        if (hdiv < 1)
                hdiv = 1;

        cfg->freq.hclk = hclk = armdiv_clk / hdiv;

        /* set dvs depending on whether we reached armclk or not. */
        cfg->divs.dvs = dvs = armclk < armdiv_clk;

        /* update the actual armclk we achieved. */
        cfg->freq.armclk = dvs ? hclk : armdiv_clk;

        s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
                     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);

        if (hdiv > 4)
                goto invalid;

        pdiv = (hclk > cfg->max.pclk) ? 2 : 1;

        if ((hclk / pdiv) > cfg->max.pclk)
                pdiv++;

        cfg->freq.pclk = hclk / pdiv;

        s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);

        if (pdiv > 2)
                goto invalid;

        pdiv *= hdiv;

        /* store the result, and then return */

        cfg->divs.h_divisor = hdiv * armdiv;
        cfg->divs.p_divisor = pdiv * armdiv;

        return 0;

 invalid:
        return -EINVAL;
}

static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
{
        unsigned long clkdiv;
        unsigned long olddiv;

        olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);

        /* clear off current clock info */

        clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
        clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
        clkdiv &= ~S3C2412_CLKDIVN_PDIVN;

        if (cfg->divs.arm_divisor == 2)
                clkdiv |= S3C2412_CLKDIVN_ARMDIVN;

        clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);

        if (cfg->divs.p_divisor != cfg->divs.h_divisor)
                clkdiv |= S3C2412_CLKDIVN_PDIVN;

        s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
        __raw_writel(clkdiv, S3C2410_CLKDIVN);

        clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
}

static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
{
        struct s3c_cpufreq_board *board = cfg->board;
        unsigned long refresh;

        s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
                     board->refresh, cfg->freq.hclk);

        /* Reduce both the refresh time (in ns) and the frequency (in MHz)
         * by 10 each to ensure that we do not overflow 32 bit numbers. This
         * should work for HCLK up to 133MHz and refresh period up to 30usec.
         */

        refresh = (board->refresh / 10);
        refresh *= (cfg->freq.hclk / 100);
        refresh /= (1 * 1000 * 1000);   /* 10^6 */

        s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
        __raw_writel(refresh, S3C2412_REFRESH);
}

/* set the default cpu frequency information, based on an 200MHz part
 * as we have no other way of detecting the speed rating in software.
 */

static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
        .max            = {
                .fclk   = 200000000,
                .hclk   = 100000000,
                .pclk   =  50000000,
        },

        .latency        = 5000000, /* 5ms */

        .locktime_m     = 150,
        .locktime_u     = 150,
        .locktime_bits  = 16,

        .name           = "s3c2412",
        .set_refresh    = s3c2412_cpufreq_setrefresh,
        .set_divs       = s3c2412_cpufreq_setdivs,
        .calc_divs      = s3c2412_cpufreq_calcdivs,

        .calc_iotiming  = s3c2412_iotiming_calc,
        .set_iotiming   = s3c2412_iotiming_set,
        .get_iotiming   = s3c2412_iotiming_get,

        .resume_clocks  = s3c2412_setup_clocks,

        .debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
};

static int s3c2412_cpufreq_add(struct sys_device *sysdev)
{
        unsigned long fclk_rate;

        hclk = clk_get(NULL, "hclk");
        if (IS_ERR(hclk)) {
                printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
                return -ENOENT;
        }

        fclk = clk_get(NULL, "fclk");
        if (IS_ERR(fclk)) {
                printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
                goto err_fclk;
        }

        fclk_rate = clk_get_rate(fclk);
        if (fclk_rate > 200000000) {
                printk(KERN_INFO
                       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
                       __func__, fclk_rate / 1000000);
                s3c2412_cpufreq_info.max.fclk = 266000000;
                s3c2412_cpufreq_info.max.hclk = 133000000;
                s3c2412_cpufreq_info.max.pclk =  66000000;
        }

        armclk = clk_get(NULL, "armclk");
        if (IS_ERR(armclk)) {
                printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
                goto err_armclk;
        }

        xtal = clk_get(NULL, "xtal");
        if (IS_ERR(xtal)) {
                printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
                goto err_xtal;
        }

        return s3c_cpufreq_register(&s3c2412_cpufreq_info);

err_xtal:
        clk_put(armclk);
err_armclk:
        clk_put(fclk);
err_fclk:
        clk_put(hclk);

        return -ENOENT;
}

static struct sysdev_driver s3c2412_cpufreq_driver = {
        .add            = s3c2412_cpufreq_add,
};

static int s3c2412_cpufreq_init(void)
{
        return sysdev_driver_register(&s3c2412_sysclass,
                                      &s3c2412_cpufreq_driver);
}

arch_initcall(s3c2412_cpufreq_init);