/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
 */

#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioce_provider.h>

/*
 * 1/26/2006
 *
 * WAR for SGI PV 944642.  For revA TIOCE, need to use the following recipe
 * (taken from the above PV) before and after accessing tioce internal MMR's
 * to avoid tioce lockups.
 *
 * The recipe as taken from the PV:
 *
 *      if(mmr address < 0x45000) {
 *              if(mmr address == 0 or 0x80)
 *                      mmr wrt or read address 0xc0
 *              else if(mmr address == 0x148 or 0x200)
 *                      mmr wrt or read address 0x28
 *              else
 *                      mmr wrt or read address 0x158
 *
 *              do desired mmr access (rd or wrt)
 *
 *              if(mmr address == 0x100)
 *                      mmr wrt or read address 0x38
 *              mmr wrt or read address 0xb050
 *      } else
 *              do desired mmr access
 *
 * According to hw, we can use reads instead of writes to the above address
 *
 * Note this WAR can only to be used for accessing internal MMR's in the
 * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff.  This includes the
 * "Local CE Registers and Memories" and "PCI Compatible Config Space" address
 * spaces from table 2-1 of the "CE Programmer's Reference Overview" document.
 *
 * All registers defined in struct tioce will meet that criteria.
 */

static void inline
tioce_mmr_war_pre(struct tioce_kernel *kern, void __iomem *mmr_addr)
{
        u64 mmr_base;
        u64 mmr_offset;

        if (kern->ce_common->ce_rev != TIOCE_REV_A)
                return;

        mmr_base = kern->ce_common->ce_pcibus.bs_base;
        mmr_offset = (unsigned long)mmr_addr - mmr_base;

        if (mmr_offset < 0x45000) {
                u64 mmr_war_offset;

                if (mmr_offset == 0 || mmr_offset == 0x80)
                        mmr_war_offset = 0xc0;
                else if (mmr_offset == 0x148 || mmr_offset == 0x200)
                        mmr_war_offset = 0x28;
                else
                        mmr_war_offset = 0x158;

                readq_relaxed((void __iomem *)(mmr_base + mmr_war_offset));
        }
}

static void inline
tioce_mmr_war_post(struct tioce_kernel *kern, void __iomem *mmr_addr)
{
        u64 mmr_base;
        u64 mmr_offset;

        if (kern->ce_common->ce_rev != TIOCE_REV_A)
                return;

        mmr_base = kern->ce_common->ce_pcibus.bs_base;
        mmr_offset = (unsigned long)mmr_addr - mmr_base;

        if (mmr_offset < 0x45000) {
                if (mmr_offset == 0x100)
                        readq_relaxed((void __iomem *)(mmr_base + 0x38));
                readq_relaxed((void __iomem *)(mmr_base + 0xb050));
        }
}

/* load mmr contents into a variable */
#define tioce_mmr_load(kern, mmrp, varp) do {\
        tioce_mmr_war_pre(kern, mmrp); \
        *(varp) = readq_relaxed(mmrp); \
        tioce_mmr_war_post(kern, mmrp); \
} while (0)

/* store variable contents into mmr */
#define tioce_mmr_store(kern, mmrp, varp) do {\
        tioce_mmr_war_pre(kern, mmrp); \
        writeq(*varp, mmrp); \
        tioce_mmr_war_post(kern, mmrp); \
} while (0)

/* store immediate value into mmr */
#define tioce_mmr_storei(kern, mmrp, val) do {\
        tioce_mmr_war_pre(kern, mmrp); \
        writeq(val, mmrp); \
        tioce_mmr_war_post(kern, mmrp); \
} while (0)

/* set bits (immediate value) into mmr */
#define tioce_mmr_seti(kern, mmrp, bits) do {\
        u64 tmp; \
        tioce_mmr_load(kern, mmrp, &tmp); \
        tmp |= (bits); \
        tioce_mmr_store(kern, mmrp, &tmp); \
} while (0)

/* clear bits (immediate value) into mmr */
#define tioce_mmr_clri(kern, mmrp, bits) do { \
        u64 tmp; \
        tioce_mmr_load(kern, mmrp, &tmp); \
        tmp &= ~(bits); \
        tioce_mmr_store(kern, mmrp, &tmp); \
} while (0)

/**
 * Bus address ranges for the 5 flavors of TIOCE DMA
 */

#define TIOCE_D64_MIN   0x8000000000000000UL
#define TIOCE_D64_MAX   0xffffffffffffffffUL
#define TIOCE_D64_ADDR(a)       ((a) >= TIOCE_D64_MIN)

#define TIOCE_D32_MIN   0x0000000080000000UL
#define TIOCE_D32_MAX   0x00000000ffffffffUL
#define TIOCE_D32_ADDR(a)       ((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX)

#define TIOCE_M32_MIN   0x0000000000000000UL
#define TIOCE_M32_MAX   0x000000007fffffffUL
#define TIOCE_M32_ADDR(a)       ((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX)

#define TIOCE_M40_MIN   0x0000004000000000UL
#define TIOCE_M40_MAX   0x0000007fffffffffUL
#define TIOCE_M40_ADDR(a)       ((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX)

#define TIOCE_M40S_MIN  0x0000008000000000UL
#define TIOCE_M40S_MAX  0x000000ffffffffffUL
#define TIOCE_M40S_ADDR(a)      ((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX)

/*
 * ATE manipulation macros.
 */

#define ATE_PAGESHIFT(ps)       (__ffs(ps))
#define ATE_PAGEMASK(ps)        ((ps)-1)

#define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps))
#define ATE_NPAGES(start, len, pagesize) \
        (ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1)

#define ATE_VALID(ate)  ((ate) & (1UL << 63))
#define ATE_MAKE(addr, ps, msi) \
        (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63) | ((msi)?(1UL << 62):0))

/*
 * Flavors of ate-based mapping supported by tioce_alloc_map()
 */

#define TIOCE_ATE_M32   1
#define TIOCE_ATE_M40   2
#define TIOCE_ATE_M40S  3

#define KB(x)   ((u64)(x) << 10)
#define MB(x)   ((u64)(x) << 20)
#define GB(x)   ((u64)(x) << 30)

/**
 * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
 * @ct_addr: system coretalk address
 *
 * Map @ct_addr into 64-bit CE bus space.  No device context is necessary
 * and no CE mapping are consumed.
 *
 * Bits 53:0 come from the coretalk address.  The remaining bits are set as
 * follows:
 *
 * 63    - must be 1 to indicate d64 mode to CE hardware
 * 62    - barrier bit ... controlled with tioce_dma_barrier()
 * 61    - msi bit ... specified through dma_flags
 * 60:54 - reserved, MBZ
 */
static u64
tioce_dma_d64(unsigned long ct_addr, int dma_flags)
{
        u64 bus_addr;

        bus_addr = ct_addr | (1UL << 63);
        if (dma_flags & SN_DMA_MSI)
                bus_addr |= (1UL << 61);

        return bus_addr;
}

/**
 * pcidev_to_tioce - return misc ce related pointers given a pci_dev
 * @pci_dev: pci device context
 * @base: ptr to store struct tioce_mmr * for the CE holding this device
 * @kernel: ptr to store struct tioce_kernel * for the CE holding this device
 * @port: ptr to store the CE port number that this device is on
 *
 * Return pointers to various CE-related structures for the CE upstream of
 * @pci_dev.
 */
static inline void
pcidev_to_tioce(struct pci_dev *pdev, struct tioce __iomem **base,
                struct tioce_kernel **kernel, int *port)
{
        struct pcidev_info *pcidev_info;
        struct tioce_common *ce_common;
        struct tioce_kernel *ce_kernel;

        pcidev_info = SN_PCIDEV_INFO(pdev);
        ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
        ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private;

        if (base)
                *base = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
        if (kernel)
                *kernel = ce_kernel;

        /*
         * we use port as a zero-based value internally, even though the
         * documentation is 1-based.
         */
        if (port)
                *port =
                    (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1;
}

/**
 * tioce_alloc_map - Given a coretalk address, map it to pcie bus address
 * space using one of the various ATE-based address modes.
 * @ce_kern: tioce context
 * @type: map mode to use
 * @port: 0-based port that the requesting device is downstream of
 * @ct_addr: the coretalk address to map
 * @len: number of bytes to map
 *
 * Given the addressing type, set up various parameters that define the
 * ATE pool to use.  Search for a contiguous block of entries to cover the
 * length, and if enough resources exist, fill in the ATEs and construct a
 * tioce_dmamap struct to track the mapping.
 */
static u64
tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
                u64 ct_addr, int len, int dma_flags)
{
        int i;
        int j;
        int first;
        int last;
        int entries;
        int nates;
        u64 pagesize;
        int msi_capable, msi_wanted;
        u64 *ate_shadow;
        u64 __iomem *ate_reg;
        u64 addr;
        struct tioce __iomem *ce_mmr;
        u64 bus_base;
        struct tioce_dmamap *map;

        ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base;

        switch (type) {
        case TIOCE_ATE_M32:
                /*
                 * The first 64 entries of the ate3240 pool are dedicated to
                 * super-page (TIOCE_ATE_M40S) mode.
                 */
                first = 64;
                entries = TIOCE_NUM_M3240_ATES - 64;
                ate_shadow = ce_kern->ce_ate3240_shadow;
                ate_reg = ce_mmr->ce_ure_ate3240;
                pagesize = ce_kern->ce_ate3240_pagesize;
                bus_base = TIOCE_M32_MIN;
                msi_capable = 1;
                break;
        case TIOCE_ATE_M40:
                first = 0;
                entries = TIOCE_NUM_M40_ATES;
                ate_shadow = ce_kern->ce_ate40_shadow;
                ate_reg = ce_mmr->ce_ure_ate40;
                pagesize = MB(64);
                bus_base = TIOCE_M40_MIN;
                msi_capable = 0;
                break;
        case TIOCE_ATE_M40S:
                /*
                 * ate3240 entries 0-31 are dedicated to port1 super-page
                 * mappings.  ate3240 entries 32-63 are dedicated to port2.
                 */
                first = port * 32;
                entries = 32;
                ate_shadow = ce_kern->ce_ate3240_shadow;
                ate_reg = ce_mmr->ce_ure_ate3240;
                pagesize = GB(16);
                bus_base = TIOCE_M40S_MIN;
                msi_capable = 0;
                break;
        default:
                return 0;
        }

        msi_wanted = dma_flags & SN_DMA_MSI;
        if (msi_wanted && !msi_capable)
                return 0;

        nates = ATE_NPAGES(ct_addr, len, pagesize);
        if (nates > entries)
                return 0;

        last = first + entries - nates;
        for (i = first; i <= last; i++) {
                if (ATE_VALID(ate_shadow[i]))
                        continue;

                for (j = i; j < i + nates; j++)
                        if (ATE_VALID(ate_shadow[j]))
                                break;

                if (j >= i + nates)
                        break;
        }

        if (i > last)
                return 0;

        map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC);
        if (!map)
                return 0;

        addr = ct_addr;
        for (j = 0; j < nates; j++) {
                u64 ate;

                ate = ATE_MAKE(addr, pagesize, msi_wanted);
                ate_shadow[i + j] = ate;
                tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate);
                addr += pagesize;
        }

        map->refcnt = 1;
        map->nbytes = nates * pagesize;
        map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize);
        map->pci_start = bus_base + (i * pagesize);
        map->ate_hw = &ate_reg[i];
        map->ate_shadow = &ate_shadow[i];
        map->ate_count = nates;

        list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list);

        return (map->pci_start + (ct_addr - map->ct_start));
}

/**
 * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode
 * @pdev: linux pci_dev representing the function
 * @paddr: system physical address
 *
 * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
 */
static u64
tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr, int dma_flags)
{
        int dma_ok;
        int port;
        struct tioce __iomem *ce_mmr;
        struct tioce_kernel *ce_kern;
        u64 ct_upper;
        u64 ct_lower;
        dma_addr_t bus_addr;

        if (dma_flags & SN_DMA_MSI)
                return 0;

        ct_upper = ct_addr & ~0x3fffffffUL;
        ct_lower = ct_addr & 0x3fffffffUL;

        pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);

        if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
                u64 tmp;

                ce_kern->ce_port[port].dirmap_shadow = ct_upper;
                tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
                                 ct_upper);
                tmp = ce_mmr->ce_ure_dir_map[port];
                dma_ok = 1;
        } else
                dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper);

        if (dma_ok) {
                ce_kern->ce_port[port].dirmap_refcnt++;
                bus_addr = TIOCE_D32_MIN + ct_lower;
        } else
                bus_addr = 0;

        return bus_addr;
}

/**
 * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude
 * the barrier bit.
 * @bus_addr:  bus address to swizzle
 *
 * Given a TIOCE bus address, set the appropriate bit to indicate barrier
 * attributes.
 */
static u64
tioce_dma_barrier(u64 bus_addr, int on)
{
        u64 barrier_bit;

        /* barrier not supported in M40/M40S mode */
        if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
                return bus_addr;

        if (TIOCE_D64_ADDR(bus_addr))
                barrier_bit = (1UL << 62);
        else                    /* must be m32 or d32 */
                barrier_bit = (1UL << 30);

        return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit);
}

/**
 * tioce_dma_unmap - release CE mapping resources
 * @pdev: linux pci_dev representing the function
 * @bus_addr: bus address returned by an earlier tioce_dma_map
 * @dir: mapping direction (unused)
 *
 * Locate mapping resources associated with @bus_addr and release them.
 * For mappings created using the direct modes there are no resources
 * to release.
 */
void
tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
{
        int i;
        int port;
        struct tioce_kernel *ce_kern;
        struct tioce __iomem *ce_mmr;
        unsigned long flags;

        bus_addr = tioce_dma_barrier(bus_addr, 0);
        pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);

        /* nothing to do for D64 */

        if (TIOCE_D64_ADDR(bus_addr))
                return;

        spin_lock_irqsave(&ce_kern->ce_lock, flags);

        if (TIOCE_D32_ADDR(bus_addr)) {
                if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
                        ce_kern->ce_port[port].dirmap_shadow = 0;
                        tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
                                         0);
                }
        } else {
                struct tioce_dmamap *map;

                list_for_each_entry(map, &ce_kern->ce_dmamap_list,
                                    ce_dmamap_list) {
                        u64 last;

                        last = map->pci_start + map->nbytes - 1;
                        if (bus_addr >= map->pci_start && bus_addr <= last)
                                break;
                }

                if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
                        printk(KERN_WARNING
                               "%s:  %s - no map found for bus_addr 0x%llx\n",
                               __func__, pci_name(pdev), bus_addr);
                } else if (--map->refcnt == 0) {
                        for (i = 0; i < map->ate_count; i++) {
                                map->ate_shadow[i] = 0;
                                tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0);
                        }

                        list_del(&map->ce_dmamap_list);
                        kfree(map);
                }
        }

        spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
}

/**
 * tioce_do_dma_map - map pages for PCI DMA
 * @pdev: linux pci_dev representing the function
 * @paddr: host physical address to map
 * @byte_count: bytes to map
 *
 * This is the main wrapper for mapping host physical pages to CE PCI space.
 * The mapping mode used is based on the device's dma_mask.
 */
static u64
tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
                 int barrier, int dma_flags)
{
        unsigned long flags;
        u64 ct_addr;
        u64 mapaddr = 0;
        struct tioce_kernel *ce_kern;
        struct tioce_dmamap *map;
        int port;
        u64 dma_mask;

        dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;

        /* cards must be able to address at least 31 bits */
        if (dma_mask < 0x7fffffffUL)
                return 0;

        if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
                ct_addr = PHYS_TO_TIODMA(paddr);
        else
                ct_addr = paddr;

        /*
         * If the device can generate 64 bit addresses, create a D64 map.
         */
        if (dma_mask == ~0UL) {
                mapaddr = tioce_dma_d64(ct_addr, dma_flags);
                if (mapaddr)
                        goto dma_map_done;
        }

        pcidev_to_tioce(pdev, NULL, &ce_kern, &port);

        spin_lock_irqsave(&ce_kern->ce_lock, flags);

        /*
         * D64 didn't work ... See if we have an existing map that covers
         * this address range.  Must account for devices dma_mask here since
         * an existing map might have been done in a mode using more pci
         * address bits than this device can support.
         */
        list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
                u64 last;

                last = map->ct_start + map->nbytes - 1;
                if (ct_addr >= map->ct_start &&
                    ct_addr + byte_count - 1 <= last &&
                    map->pci_start <= dma_mask) {
                        map->refcnt++;
                        mapaddr = map->pci_start + (ct_addr - map->ct_start);
                        break;
                }
        }

        /*
         * If we don't have a map yet, and the card can generate 40
         * bit addresses, try the M40/M40S modes.  Note these modes do not
         * support a barrier bit, so if we need a consistent map these
         * won't work.
         */
        if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) {
                /*
                 * We have two options for 40-bit mappings:  16GB "super" ATEs
                 * and 64MB "regular" ATEs.  We'll try both if needed for a
                 * given mapping but which one we try first depends on the
                 * size.  For requests >64MB, prefer to use a super page with
                 * regular as the fallback. Otherwise, try in the reverse order.
                 */

                if (byte_count > MB(64)) {
                        mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
                                                  port, ct_addr, byte_count,
                                                  dma_flags);
                        if (!mapaddr)
                                mapaddr =
                                    tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
                                                    ct_addr, byte_count,
                                                    dma_flags);
                } else {
                        mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
                                                  ct_addr, byte_count,
                                                  dma_flags);
                        if (!mapaddr)
                                mapaddr =
                                    tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
                                                    port, ct_addr, byte_count,
                                                    dma_flags);
                }
        }

        /*
         * 32-bit direct is the next mode to try
         */
        if (!mapaddr && dma_mask >= 0xffffffffUL)
                mapaddr = tioce_dma_d32(pdev, ct_addr, dma_flags);

        /*
         * Last resort, try 32-bit ATE-based map.
         */
        if (!mapaddr)
                mapaddr =
                    tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr,
                                    byte_count, dma_flags);

        spin_unlock_irqrestore(&ce_kern->ce_lock, flags);

dma_map_done:
        if (mapaddr && barrier)
                mapaddr = tioce_dma_barrier(mapaddr, 1);

        return mapaddr;
}

/**
 * tioce_dma - standard pci dma map interface
 * @pdev: pci device requesting the map
 * @paddr: system physical address to map into pci space
 * @byte_count: # bytes to map
 *
 * Simply call tioce_do_dma_map() to create a map with the barrier bit clear
 * in the address.
 */
static u64
tioce_dma(struct pci_dev *pdev, unsigned long  paddr, size_t byte_count, int dma_flags)
{
        return tioce_do_dma_map(pdev, paddr, byte_count, 0, dma_flags);
}

/**
 * tioce_dma_consistent - consistent pci dma map interface
 * @pdev: pci device requesting the map
 * @paddr: system physical address to map into pci space
 * @byte_count: # bytes to map
 *
 * Simply call tioce_do_dma_map() to create a map with the barrier bit set
 * in the address.
 */
static u64
tioce_dma_consistent(struct pci_dev *pdev, unsigned long  paddr, size_t byte_count, int dma_flags)
{
        return tioce_do_dma_map(pdev, paddr, byte_count, 1, dma_flags);
}

/**
 * tioce_error_intr_handler - SGI TIO CE error interrupt handler
 * @irq: unused
 * @arg: pointer to tioce_common struct for the given CE
 *
 * Handle a CE error interrupt.  Simply a wrapper around a SAL call which
 * defers processing to the SGI prom.
 */
static irqreturn_t
tioce_error_intr_handler(int irq, void *arg)
{
        struct tioce_common *soft = arg;
        struct ia64_sal_retval ret_stuff;
        ret_stuff.status = 0;
        ret_stuff.v0 = 0;

        SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT,
                        soft->ce_pcibus.bs_persist_segment,
                        soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);

        if (ret_stuff.v0)
                panic("tioce_error_intr_handler:  Fatal TIOCE error");

        return IRQ_HANDLED;
}

/**
 * tioce_reserve_m32 - reserve M32 ATEs for the indicated address range
 * @tioce_kernel: TIOCE context to reserve ATEs for
 * @base: starting bus address to reserve
 * @limit: last bus address to reserve
 *
 * If base/limit falls within the range of bus space mapped through the
 * M32 space, reserve the resources corresponding to the range.
 */
static void
tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
{
        int ate_index, last_ate, ps;
        struct tioce __iomem *ce_mmr;

        ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base;
        ps = ce_kern->ce_ate3240_pagesize;
        ate_index = ATE_PAGE(base, ps);
        last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1;

        if (ate_index < 64)
                ate_index = 64;

        if (last_ate >= TIOCE_NUM_M3240_ATES)
                last_ate = TIOCE_NUM_M3240_ATES - 1;

        while (ate_index <= last_ate) {
                u64 ate;

                ate = ATE_MAKE(0xdeadbeef, ps, 0);
                ce_kern->ce_ate3240_shadow[ate_index] = ate;
                tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
                                 ate);
                ate_index++;
        }
}

/**
 * tioce_kern_init - init kernel structures related to a given TIOCE
 * @tioce_common: ptr to a cached tioce_common struct that originated in prom
 */
static struct tioce_kernel *
tioce_kern_init(struct tioce_common *tioce_common)
{
        int i;
        int ps;
        int dev;
        u32 tmp;
        unsigned int seg, bus;
        struct tioce __iomem *tioce_mmr;
        struct tioce_kernel *tioce_kern;

        tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL);
        if (!tioce_kern) {
                return NULL;
        }

        tioce_kern->ce_common = tioce_common;
        spin_lock_init(&tioce_kern->ce_lock);
        INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
        tioce_common->ce_kernel_private = (u64) tioce_kern;

        /*
         * Determine the secondary bus number of the port2 logical PPB.
         * This is used to decide whether a given pci device resides on
         * port1 or port2.  Note:  We don't have enough plumbing set up
         * here to use pci_read_config_xxx() so use raw_pci_read().
         */

        seg = tioce_common->ce_pcibus.bs_persist_segment;
        bus = tioce_common->ce_pcibus.bs_persist_busnum;

        raw_pci_read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp);
        tioce_kern->ce_port1_secondary = (u8) tmp;

        /*
         * Set PMU pagesize to the largest size available, and zero out
         * the ATEs.
         */

        tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base;
        tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map,
                       CE_URE_PAGESIZE_MASK);
        tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map,
                       CE_URE_256K_PAGESIZE);
        ps = tioce_kern->ce_ate3240_pagesize = KB(256);

        for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
                tioce_kern->ce_ate40_shadow[i] = 0;
                tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0);
        }

        for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
                tioce_kern->ce_ate3240_shadow[i] = 0;
                tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0);
        }

        /*
         * Reserve ATEs corresponding to reserved address ranges.  These
         * include:
         *
         *      Memory space covered by each PPB mem base/limit register
         *      Memory space covered by each PPB prefetch base/limit register
         *
         * These bus ranges are for pio (downstream) traffic only, and so
         * cannot be used for DMA.
         */

        for (dev = 1; dev <= 2; dev++) {
                u64 base, limit;

                /* mem base/limit */

                raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
                                  PCI_MEMORY_BASE, 2, &tmp);
                base = (u64)tmp << 16;

                raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
                                  PCI_MEMORY_LIMIT, 2, &tmp);
                limit = (u64)tmp << 16;
                limit |= 0xfffffUL;

                if (base < limit)
                        tioce_reserve_m32(tioce_kern, base, limit);

                /*
                 * prefetch mem base/limit.  The tioce ppb's have 64-bit
                 * decoders, so read the upper portions w/o checking the
                 * attributes.
                 */

                raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
                                  PCI_PREF_MEMORY_BASE, 2, &tmp);
                base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;

                raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
                                  PCI_PREF_BASE_UPPER32, 4, &tmp);
                base |= (u64)tmp << 32;

                raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
                                  PCI_PREF_MEMORY_LIMIT, 2, &tmp);

                limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
                limit |= 0xfffffUL;

                raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
                                  PCI_PREF_LIMIT_UPPER32, 4, &tmp);
                limit |= (u64)tmp << 32;

                if ((base < limit) && TIOCE_M32_ADDR(base))
                        tioce_reserve_m32(tioce_kern, base, limit);
        }

        return tioce_kern;
}

/**
 * tioce_force_interrupt - implement altix force_interrupt() backend for CE
 * @sn_irq_info: sn asic irq that we need an interrupt generated for
 *
 * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to
 * force a secondary interrupt to be generated.  This is to work around an
 * asic issue where there is a small window of opportunity for a legacy device
 * interrupt to be lost.
 */
static void
tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
{
        struct pcidev_info *pcidev_info;
        struct tioce_common *ce_common;
        struct tioce_kernel *ce_kern;
        struct tioce __iomem *ce_mmr;
        u64 force_int_val;

        if (!sn_irq_info->irq_bridge)
                return;

        if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE)
                return;

        pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
        if (!pcidev_info)
                return;

        ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
        ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
        ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;

        /*
         * TIOCE Rev A workaround (PV 945826), force an interrupt by writing
         * the TIO_INTx register directly (1/26/2006)
         */
        if (ce_common->ce_rev == TIOCE_REV_A) {
                u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit);
                u64 status;

                tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status);
                if (status & int_bit_mask) {
                        u64 force_irq = (1 << 8) | sn_irq_info->irq_irq;
                        u64 ctalk = sn_irq_info->irq_xtalkaddr;
                        u64 nasid, offset;

                        nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT;
                        offset = (ctalk & CTALK_NODE_OFFSET);
                        HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq);
                }

                return;
        }

        /*
         * irq_int_bit is originally set up by prom, and holds the interrupt
         * bit shift (not mask) as defined by the bit definitions in the
         * ce_adm_int mmr.  These shifts are not the same for the
         * ce_adm_force_int register, so do an explicit mapping here to make
         * things clearer.
         */

        switch (sn_irq_info->irq_int_bit) {
        case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT:
                force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT;
                break;
        case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT:
                force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT;
                break;
        case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT:
                force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT;
                break;
        case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT:
                force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT;
                break;
        case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT:
                force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT;
                break;
        case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT:
                force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT;
                break;
        case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT:
                force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT;
                break;
        case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT:
                force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT;
                break;
        default:
                return;
        }
        tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val);
}

/**
 * tioce_target_interrupt - implement set_irq_affinity for tioce resident
 * functions.  Note:  only applies to line interrupts, not MSI's.
 *
 * @sn_irq_info: SN IRQ context
 *
 * Given an sn_irq_info, set the associated CE device's interrupt destination
 * register.  Since the interrupt destination registers are on a per-ce-slot
 * basis, this will retarget line interrupts for all functions downstream of
 * the slot.
 */
static void
tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
{
        struct pcidev_info *pcidev_info;
        struct tioce_common *ce_common;
        struct tioce_kernel *ce_kern;
        struct tioce __iomem *ce_mmr;
        int bit;
        u64 vector;

        pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
        if (!pcidev_info)
                return;

        ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
        ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
        ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;

        bit = sn_irq_info->irq_int_bit;

        tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
        vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
        vector |= sn_irq_info->irq_xtalkaddr;
        tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector);
        tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));

        tioce_force_interrupt(sn_irq_info);
}

/**
 * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus
 * @prom_bussoft: Common prom/kernel struct representing the bus
 *
 * Replicates the tioce_common pointed to by @prom_bussoft in kernel
 * space.  Allocates and initializes a kernel-only area for a given CE,
 * and sets up an irq for handling CE error interrupts.
 *
 * On successful setup, returns the kernel version of tioce_common back to
 * the caller.
 */
static void *
tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
{
        struct tioce_common *tioce_common;
        struct tioce_kernel *tioce_kern;
        struct tioce __iomem *tioce_mmr;

        /*
         * Allocate kernel bus soft and copy from prom.
         */

        tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL);
        if (!tioce_common)
                return NULL;

        memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
        tioce_common->ce_pcibus.bs_base = (unsigned long)
                ioremap(REGION_OFFSET(tioce_common->ce_pcibus.bs_base),
                        sizeof(struct tioce_common));

        tioce_kern = tioce_kern_init(tioce_common);
        if (tioce_kern == NULL) {
                kfree(tioce_common);
                return NULL;
        }

        /*
         * Clear out any transient errors before registering the error
         * interrupt handler.
         */

        tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base;
        tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL);
        tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias,
                       ~0ULL);
        tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, 0ULL);

        if (request_irq(SGI_PCIASIC_ERROR,
                        tioce_error_intr_handler,
                        IRQF_SHARED, "TIOCE error", (void *)tioce_common))
                printk(KERN_WARNING
                       "%s:  Unable to get irq %d.  "
                       "Error interrupts won't be routed for "
                       "TIOCE bus %04x:%02x\n",
                       __func__, SGI_PCIASIC_ERROR,
                       tioce_common->ce_pcibus.bs_persist_segment,
                       tioce_common->ce_pcibus.bs_persist_busnum);

        sn_set_err_irq_affinity(SGI_PCIASIC_ERROR);
        return tioce_common;
}

static struct sn_pcibus_provider tioce_pci_interfaces = {
        .dma_map = tioce_dma,
        .dma_map_consistent = tioce_dma_consistent,
        .dma_unmap = tioce_dma_unmap,
        .bus_fixup = tioce_bus_fixup,
        .force_interrupt = tioce_force_interrupt,
        .target_interrupt = tioce_target_interrupt
};

/**
 * tioce_init_provider - init SN PCI provider ops for TIO CE
 */
int
tioce_init_provider(void)
{
        sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces;
        return 0;
}