#ifndef _ASM_M32R_BITOPS_H
#define _ASM_M32R_BITOPS_H

/*
 *  linux/include/asm-m32r/bitops.h
 *
 *  Copyright 1992, Linus Torvalds.
 *
 *  M32R version:
 *    Copyright (C) 2001, 2002  Hitoshi Yamamoto
 *    Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
 */

#ifndef _LINUX_BITOPS_H
#error only <linux/bitops.h> can be included directly
#endif

#include <linux/compiler.h>
#include <asm/assembler.h>
#include <asm/system.h>
#include <asm/byteorder.h>
#include <asm/types.h>

/*
 * These have to be done with inline assembly: that way the bit-setting
 * is guaranteed to be atomic. All bit operations return 0 if the bit
 * was cleared before the operation and != 0 if it was not.
 *
 * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
 */

/**
 * set_bit - Atomically set a bit in memory
 * @nr: the bit to set
 * @addr: the address to start counting from
 *
 * This function is atomic and may not be reordered.  See __set_bit()
 * if you do not require the atomic guarantees.
 * Note that @nr may be almost arbitrarily large; this function is not
 * restricted to acting on a single-word quantity.
 */
static __inline__ void set_bit(int nr, volatile void * addr)
{
        __u32 mask;
        volatile __u32 *a = addr;
        unsigned long flags;
        unsigned long tmp;

        a += (nr >> 5);
        mask = (1 << (nr & 0x1F));

        local_irq_save(flags);
        __asm__ __volatile__ (
                DCACHE_CLEAR("%0", "r6", "%1")
                M32R_LOCK" %0, @%1;             \n\t"
                "or     %0, %2;                 \n\t"
                M32R_UNLOCK" %0, @%1;           \n\t"
                : "=&r" (tmp)
                : "r" (a), "r" (mask)
                : "memory"
#ifdef CONFIG_CHIP_M32700_TS1
                , "r6"
#endif  /* CONFIG_CHIP_M32700_TS1 */
        );
        local_irq_restore(flags);
}

/**
 * clear_bit - Clears a bit in memory
 * @nr: Bit to clear
 * @addr: Address to start counting from
 *
 * clear_bit() is atomic and may not be reordered.  However, it does
 * not contain a memory barrier, so if it is used for locking purposes,
 * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
 * in order to ensure changes are visible on other processors.
 */
static __inline__ void clear_bit(int nr, volatile void * addr)
{
        __u32 mask;
        volatile __u32 *a = addr;
        unsigned long flags;
        unsigned long tmp;

        a += (nr >> 5);
        mask = (1 << (nr & 0x1F));

        local_irq_save(flags);

        __asm__ __volatile__ (
                DCACHE_CLEAR("%0", "r6", "%1")
                M32R_LOCK" %0, @%1;             \n\t"
                "and    %0, %2;                 \n\t"
                M32R_UNLOCK" %0, @%1;           \n\t"
                : "=&r" (tmp)
                : "r" (a), "r" (~mask)
                : "memory"
#ifdef CONFIG_CHIP_M32700_TS1
                , "r6"
#endif  /* CONFIG_CHIP_M32700_TS1 */
        );
        local_irq_restore(flags);
}

#define smp_mb__before_clear_bit()      barrier()
#define smp_mb__after_clear_bit()       barrier()

/**
 * change_bit - Toggle a bit in memory
 * @nr: Bit to clear
 * @addr: Address to start counting from
 *
 * change_bit() is atomic and may not be reordered.
 * Note that @nr may be almost arbitrarily large; this function is not
 * restricted to acting on a single-word quantity.
 */
static __inline__ void change_bit(int nr, volatile void * addr)
{
        __u32  mask;
        volatile __u32  *a = addr;
        unsigned long flags;
        unsigned long tmp;

        a += (nr >> 5);
        mask = (1 << (nr & 0x1F));

        local_irq_save(flags);
        __asm__ __volatile__ (
                DCACHE_CLEAR("%0", "r6", "%1")
                M32R_LOCK" %0, @%1;             \n\t"
                "xor    %0, %2;                 \n\t"
                M32R_UNLOCK" %0, @%1;           \n\t"
                : "=&r" (tmp)
                : "r" (a), "r" (mask)
                : "memory"
#ifdef CONFIG_CHIP_M32700_TS1
                , "r6"
#endif  /* CONFIG_CHIP_M32700_TS1 */
        );
        local_irq_restore(flags);
}

/**
 * test_and_set_bit - Set a bit and return its old value
 * @nr: Bit to set
 * @addr: Address to count from
 *
 * This operation is atomic and cannot be reordered.
 * It also implies a memory barrier.
 */
static __inline__ int test_and_set_bit(int nr, volatile void * addr)
{
        __u32 mask, oldbit;
        volatile __u32 *a = addr;
        unsigned long flags;
        unsigned long tmp;

        a += (nr >> 5);
        mask = (1 << (nr & 0x1F));

        local_irq_save(flags);
        __asm__ __volatile__ (
                DCACHE_CLEAR("%0", "%1", "%2")
                M32R_LOCK" %0, @%2;             \n\t"
                "mv     %1, %0;                 \n\t"
                "and    %0, %3;                 \n\t"
                "or     %1, %3;                 \n\t"
                M32R_UNLOCK" %1, @%2;           \n\t"
                : "=&r" (oldbit), "=&r" (tmp)
                : "r" (a), "r" (mask)
                : "memory"
        );
        local_irq_restore(flags);

        return (oldbit != 0);
}

/**
 * test_and_clear_bit - Clear a bit and return its old value
 * @nr: Bit to set
 * @addr: Address to count from
 *
 * This operation is atomic and cannot be reordered.
 * It also implies a memory barrier.
 */
static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
{
        __u32 mask, oldbit;
        volatile __u32 *a = addr;
        unsigned long flags;
        unsigned long tmp;

        a += (nr >> 5);
        mask = (1 << (nr & 0x1F));

        local_irq_save(flags);

        __asm__ __volatile__ (
                DCACHE_CLEAR("%0", "%1", "%3")
                M32R_LOCK" %0, @%3;             \n\t"
                "mv     %1, %0;                 \n\t"
                "and    %0, %2;                 \n\t"
                "not    %2, %2;                 \n\t"
                "and    %1, %2;                 \n\t"
                M32R_UNLOCK" %1, @%3;           \n\t"
                : "=&r" (oldbit), "=&r" (tmp), "+r" (mask)
                : "r" (a)
                : "memory"
        );
        local_irq_restore(flags);

        return (oldbit != 0);
}

/**
 * test_and_change_bit - Change a bit and return its old value
 * @nr: Bit to set
 * @addr: Address to count from
 *
 * This operation is atomic and cannot be reordered.
 * It also implies a memory barrier.
 */
static __inline__ int test_and_change_bit(int nr, volatile void * addr)
{
        __u32 mask, oldbit;
        volatile __u32 *a = addr;
        unsigned long flags;
        unsigned long tmp;

        a += (nr >> 5);
        mask = (1 << (nr & 0x1F));

        local_irq_save(flags);
        __asm__ __volatile__ (
                DCACHE_CLEAR("%0", "%1", "%2")
                M32R_LOCK" %0, @%2;             \n\t"
                "mv     %1, %0;                 \n\t"
                "and    %0, %3;                 \n\t"
                "xor    %1, %3;                 \n\t"
                M32R_UNLOCK" %1, @%2;           \n\t"
                : "=&r" (oldbit), "=&r" (tmp)
                : "r" (a), "r" (mask)
                : "memory"
        );
        local_irq_restore(flags);

        return (oldbit != 0);
}

#include <asm-generic/bitops/non-atomic.h>
#include <asm-generic/bitops/ffz.h>
#include <asm-generic/bitops/__ffs.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/fls64.h>

#ifdef __KERNEL__

#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/find.h>
#include <asm-generic/bitops/ffs.h>
#include <asm-generic/bitops/hweight.h>
#include <asm-generic/bitops/lock.h>

#endif /* __KERNEL__ */

#ifdef __KERNEL__

#include <asm-generic/bitops/ext2-non-atomic.h>
#include <asm-generic/bitops/ext2-atomic.h>
#include <asm-generic/bitops/minix.h>

#endif /* __KERNEL__ */

#endif /* _ASM_M32R_BITOPS_H */