/*
 * 
 * Common boot and setup code.
 *
 * Copyright (C) 2001 PPC64 Team, IBM Corp
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 */

#undef DEBUG

#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/utsname.h>
#include <linux/tty.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/unistd.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/lockdep.h>
#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/machdep.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
#include <asm/kexec.h>
#include <asm/swiotlb.h>
#include <asm/mmu_context.h>

#include "setup.h"

#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif

int boot_cpuid = 0;
u64 ppc64_pft_size;

/* Pick defaults since we might want to patch instructions
 * before we've read this from the device tree.
 */
struct ppc64_caches ppc64_caches = {
        .dline_size = 0x40,
        .log_dline_size = 6,
        .iline_size = 0x40,
        .log_iline_size = 6
};
EXPORT_SYMBOL_GPL(ppc64_caches);

/*
 * These are used in binfmt_elf.c to put aux entries on the stack
 * for each elf executable being started.
 */
int dcache_bsize;
int icache_bsize;
int ucache_bsize;

#ifdef CONFIG_SMP

static int smt_enabled_cmdline;

/* Look for ibm,smt-enabled OF option */
static void check_smt_enabled(void)
{
        struct device_node *dn;
        const char *smt_option;

        /* Allow the command line to overrule the OF option */
        if (smt_enabled_cmdline)
                return;

        dn = of_find_node_by_path("/options");

        if (dn) {
                smt_option = of_get_property(dn, "ibm,smt-enabled", NULL);

                if (smt_option) {
                        if (!strcmp(smt_option, "on"))
                                smt_enabled_at_boot = 1;
                        else if (!strcmp(smt_option, "off"))
                                smt_enabled_at_boot = 0;
                }
        }
}

/* Look for smt-enabled= cmdline option */
static int __init early_smt_enabled(char *p)
{
        smt_enabled_cmdline = 1;

        if (!p)
                return 0;

        if (!strcmp(p, "on") || !strcmp(p, "1"))
                smt_enabled_at_boot = 1;
        else if (!strcmp(p, "off") || !strcmp(p, "0"))
                smt_enabled_at_boot = 0;

        return 0;
}
early_param("smt-enabled", early_smt_enabled);

#else
#define check_smt_enabled()
#endif /* CONFIG_SMP */

/* Put the paca pointer into r13 and SPRG_PACA */
void __init setup_paca(int cpu)
{
        local_paca = &paca[cpu];
        mtspr(SPRN_SPRG_PACA, local_paca);
#ifdef CONFIG_PPC_BOOK3E
        mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
#endif
}

/*
 * Early initialization entry point. This is called by head.S
 * with MMU translation disabled. We rely on the "feature" of
 * the CPU that ignores the top 2 bits of the address in real
 * mode so we can access kernel globals normally provided we
 * only toy with things in the RMO region. From here, we do
 * some early parsing of the device-tree to setup out LMB
 * data structures, and allocate & initialize the hash table
 * and segment tables so we can start running with translation
 * enabled.
 *
 * It is this function which will call the probe() callback of
 * the various platform types and copy the matching one to the
 * global ppc_md structure. Your platform can eventually do
 * some very early initializations from the probe() routine, but
 * this is not recommended, be very careful as, for example, the
 * device-tree is not accessible via normal means at this point.
 */

void __init early_setup(unsigned long dt_ptr)
{
        /* -------- printk is _NOT_ safe to use here ! ------- */

        /* Fill in any unititialised pacas */
        initialise_pacas();

        /* Identify CPU type */
        identify_cpu(0, mfspr(SPRN_PVR));

        /* Assume we're on cpu 0 for now. Don't write to the paca yet! */
        setup_paca(0);

        /* Initialize lockdep early or else spinlocks will blow */
        lockdep_init();

        /* -------- printk is now safe to use ------- */

        /* Enable early debugging if any specified (see udbg.h) */
        udbg_early_init();

        DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);

        /*
         * Do early initialization using the flattened device
         * tree, such as retrieving the physical memory map or
         * calculating/retrieving the hash table size.
         */
        early_init_devtree(__va(dt_ptr));

        /* Now we know the logical id of our boot cpu, setup the paca. */
        setup_paca(boot_cpuid);

        /* Fix up paca fields required for the boot cpu */
        get_paca()->cpu_start = 1;

        /* Probe the machine type */
        probe_machine();

        setup_kdump_trampoline();

        DBG("Found, Initializing memory management...\n");

        /* Initialize the hash table or TLB handling */
        early_init_mmu();

        DBG(" <- early_setup()\n");
}

#ifdef CONFIG_SMP
void early_setup_secondary(void)
{
        /* Mark interrupts enabled in PACA */
        get_paca()->soft_enabled = 0;

        /* Initialize the hash table or TLB handling */
        early_init_mmu_secondary();
}

#endif /* CONFIG_SMP */

#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
void smp_release_cpus(void)
{
        unsigned long *ptr;

        DBG(" -> smp_release_cpus()\n");

        /* All secondary cpus are spinning on a common spinloop, release them
         * all now so they can start to spin on their individual paca
         * spinloops. For non SMP kernels, the secondary cpus never get out
         * of the common spinloop.
         */

        ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
                        - PHYSICAL_START);
        *ptr = __pa(generic_secondary_smp_init);
        mb();

        DBG(" <- smp_release_cpus()\n");
}
#endif /* CONFIG_SMP || CONFIG_KEXEC */

/*
 * Initialize some remaining members of the ppc64_caches and systemcfg
 * structures
 * (at least until we get rid of them completely). This is mostly some
 * cache informations about the CPU that will be used by cache flush
 * routines and/or provided to userland
 */
static void __init initialize_cache_info(void)
{
        struct device_node *np;
        unsigned long num_cpus = 0;

        DBG(" -> initialize_cache_info()\n");

        for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
                num_cpus += 1;

                /* We're assuming *all* of the CPUs have the same
                 * d-cache and i-cache sizes... -Peter
                 */

                if ( num_cpus == 1 ) {
                        const u32 *sizep, *lsizep;
                        u32 size, lsize;

                        size = 0;
                        lsize = cur_cpu_spec->dcache_bsize;
                        sizep = of_get_property(np, "d-cache-size", NULL);
                        if (sizep != NULL)
                                size = *sizep;
                        lsizep = of_get_property(np, "d-cache-block-size", NULL);
                        /* fallback if block size missing */
                        if (lsizep == NULL)
                                lsizep = of_get_property(np, "d-cache-line-size", NULL);
                        if (lsizep != NULL)
                                lsize = *lsizep;
                        if (sizep == 0 || lsizep == 0)
                                DBG("Argh, can't find dcache properties ! "
                                    "sizep: %p, lsizep: %p\n", sizep, lsizep);

                        ppc64_caches.dsize = size;
                        ppc64_caches.dline_size = lsize;
                        ppc64_caches.log_dline_size = __ilog2(lsize);
                        ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;

                        size = 0;
                        lsize = cur_cpu_spec->icache_bsize;
                        sizep = of_get_property(np, "i-cache-size", NULL);
                        if (sizep != NULL)
                                size = *sizep;
                        lsizep = of_get_property(np, "i-cache-block-size", NULL);
                        if (lsizep == NULL)
                                lsizep = of_get_property(np, "i-cache-line-size", NULL);
                        if (lsizep != NULL)
                                lsize = *lsizep;
                        if (sizep == 0 || lsizep == 0)
                                DBG("Argh, can't find icache properties ! "
                                    "sizep: %p, lsizep: %p\n", sizep, lsizep);

                        ppc64_caches.isize = size;
                        ppc64_caches.iline_size = lsize;
                        ppc64_caches.log_iline_size = __ilog2(lsize);
                        ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
                }
        }

        DBG(" <- initialize_cache_info()\n");
}


/*
 * Do some initial setup of the system.  The parameters are those which 
 * were passed in from the bootloader.
 */
void __init setup_system(void)
{
        DBG(" -> setup_system()\n");

        /* Apply the CPUs-specific and firmware specific fixups to kernel
         * text (nop out sections not relevant to this CPU or this firmware)
         */
        do_feature_fixups(cur_cpu_spec->cpu_features,
                          &__start___ftr_fixup, &__stop___ftr_fixup);
        do_feature_fixups(cur_cpu_spec->mmu_features,
                          &__start___mmu_ftr_fixup, &__stop___mmu_ftr_fixup);
        do_feature_fixups(powerpc_firmware_features,
                          &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
        do_lwsync_fixups(cur_cpu_spec->cpu_features,
                         &__start___lwsync_fixup, &__stop___lwsync_fixup);

        /*
         * Unflatten the device-tree passed by prom_init or kexec
         */
        unflatten_device_tree();

        /*
         * Fill the ppc64_caches & systemcfg structures with informations
         * retrieved from the device-tree.
         */
        initialize_cache_info();

        /*
         * Initialize irq remapping subsystem
         */
        irq_early_init();

#ifdef CONFIG_PPC_RTAS
        /*
         * Initialize RTAS if available
         */
        rtas_initialize();
#endif /* CONFIG_PPC_RTAS */

        /*
         * Check if we have an initrd provided via the device-tree
         */
        check_for_initrd();

        /*
         * Do some platform specific early initializations, that includes
         * setting up the hash table pointers. It also sets up some interrupt-mapping
         * related options that will be used by finish_device_tree()
         */
        if (ppc_md.init_early)
                ppc_md.init_early();

        /*
         * We can discover serial ports now since the above did setup the
         * hash table management for us, thus ioremap works. We do that early
         * so that further code can be debugged
         */
        find_legacy_serial_ports();

        /*
         * Register early console
         */
        register_early_udbg_console();

        /*
         * Initialize xmon
         */
        xmon_setup();

        check_smt_enabled();
        smp_setup_cpu_maps();

#ifdef CONFIG_SMP
        /* Release secondary cpus out of their spinloops at 0x60 now that
         * we can map physical -> logical CPU ids
         */
        smp_release_cpus();
#endif

        printk("Starting Linux PPC64 %s\n", init_utsname()->version);

        printk("-----------------------------------------------------\n");
        printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
        printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
        if (ppc64_caches.dline_size != 0x80)
                printk("ppc64_caches.dcache_line_size = 0x%x\n",
                       ppc64_caches.dline_size);
        if (ppc64_caches.iline_size != 0x80)
                printk("ppc64_caches.icache_line_size = 0x%x\n",
                       ppc64_caches.iline_size);
#ifdef CONFIG_PPC_STD_MMU_64
        if (htab_address)
                printk("htab_address                  = 0x%p\n", htab_address);
        printk("htab_hash_mask                = 0x%lx\n", htab_hash_mask);
#endif /* CONFIG_PPC_STD_MMU_64 */
        if (PHYSICAL_START > 0)
                printk("physical_start                = 0x%llx\n",
                       (unsigned long long)PHYSICAL_START);
        printk("-----------------------------------------------------\n");

        DBG(" <- setup_system()\n");
}

#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
        unsigned int i;

        /*
         * interrupt stacks must be under 256MB, we cannot afford to take
         * SLB misses on them.
         */
        for_each_possible_cpu(i) {
                softirq_ctx[i] = (struct thread_info *)
                        __va(lmb_alloc_base(THREAD_SIZE,
                                            THREAD_SIZE, 0x10000000));
                hardirq_ctx[i] = (struct thread_info *)
                        __va(lmb_alloc_base(THREAD_SIZE,
                                            THREAD_SIZE, 0x10000000));
        }
}
#else
#define irqstack_early_init()
#endif

#ifdef CONFIG_PPC_BOOK3E
static void __init exc_lvl_early_init(void)
{
        unsigned int i;

        for_each_possible_cpu(i) {
                critirq_ctx[i] = (struct thread_info *)
                        __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
                dbgirq_ctx[i] = (struct thread_info *)
                        __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
                mcheckirq_ctx[i] = (struct thread_info *)
                        __va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
        }
}
#else
#define exc_lvl_early_init()
#endif

/*
 * Stack space used when we detect a bad kernel stack pointer, and
 * early in SMP boots before relocation is enabled.
 */
static void __init emergency_stack_init(void)
{
        unsigned long limit;
        unsigned int i;

        /*
         * Emergency stacks must be under 256MB, we cannot afford to take
         * SLB misses on them. The ABI also requires them to be 128-byte
         * aligned.
         *
         * Since we use these as temporary stacks during secondary CPU
         * bringup, we need to get at them in real mode. This means they
         * must also be within the RMO region.
         */
        limit = min(0x10000000ULL, lmb.rmo_size);

        for_each_possible_cpu(i) {
                unsigned long sp;
                sp  = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
                sp += THREAD_SIZE;
                paca[i].emergency_sp = __va(sp);
        }
}

/*
 * Called into from start_kernel, after lock_kernel has been called.
 * Initializes bootmem, which is unsed to manage page allocation until
 * mem_init is called.
 */
void __init setup_arch(char **cmdline_p)
{
        ppc64_boot_msg(0x12, "Setup Arch");

        *cmdline_p = cmd_line;

        /*
         * Set cache line size based on type of cpu as a default.
         * Systems with OF can look in the properties on the cpu node(s)
         * for a possibly more accurate value.
         */
        dcache_bsize = ppc64_caches.dline_size;
        icache_bsize = ppc64_caches.iline_size;

        /* reboot on panic */
        panic_timeout = 180;

        if (ppc_md.panic)
                setup_panic();

        init_mm.start_code = (unsigned long)_stext;
        init_mm.end_code = (unsigned long) _etext;
        init_mm.end_data = (unsigned long) _edata;
        init_mm.brk = klimit;
        
        irqstack_early_init();
        exc_lvl_early_init();
        emergency_stack_init();

#ifdef CONFIG_PPC_STD_MMU_64
        stabs_alloc();
#endif
        /* set up the bootmem stuff with available memory */
        do_init_bootmem();
        sparse_init();

#ifdef CONFIG_DUMMY_CONSOLE
        conswitchp = &dummy_con;
#endif

        if (ppc_md.setup_arch)
                ppc_md.setup_arch();

#ifdef CONFIG_SWIOTLB
        if (ppc_swiotlb_enable)
                swiotlb_init();
#endif

        paging_init();

        /* Initialize the MMU context management stuff */
        mmu_context_init();

        ppc64_boot_msg(0x15, "Setup Done");
}


/* ToDo: do something useful if ppc_md is not yet setup. */
#define PPC64_LINUX_FUNCTION 0x0f000000
#define PPC64_IPL_MESSAGE 0xc0000000
#define PPC64_TERM_MESSAGE 0xb0000000

static void ppc64_do_msg(unsigned int src, const char *msg)
{
        if (ppc_md.progress) {
                char buf[128];

                sprintf(buf, "%08X\n", src);
                ppc_md.progress(buf, 0);
                snprintf(buf, 128, "%s", msg);
                ppc_md.progress(buf, 0);
        }
}

/* Print a boot progress message. */
void ppc64_boot_msg(unsigned int src, const char *msg)
{
        ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg);
        printk("[boot]%04x %s\n", src, msg);
}

void cpu_die(void)
{
        if (ppc_md.cpu_die)
                ppc_md.cpu_die();
}

#ifdef CONFIG_SMP
#define PCPU_DYN_SIZE           ()

static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
{
        return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
                                    __pa(MAX_DMA_ADDRESS));
}

static void __init pcpu_fc_free(void *ptr, size_t size)
{
        free_bootmem(__pa(ptr), size);
}

static int pcpu_cpu_distance(unsigned int from, unsigned int to)
{
        if (cpu_to_node(from) == cpu_to_node(to))
                return LOCAL_DISTANCE;
        else
                return REMOTE_DISTANCE;
}

void __init setup_per_cpu_areas(void)
{
        const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
        size_t atom_size;
        unsigned long delta;
        unsigned int cpu;
        int rc;

        /*
         * Linear mapping is one of 4K, 1M and 16M.  For 4K, no need
         * to group units.  For larger mappings, use 1M atom which
         * should be large enough to contain a number of units.
         */
        if (mmu_linear_psize == MMU_PAGE_4K)
                atom_size = PAGE_SIZE;
        else
                atom_size = 1 << 20;

        rc = pcpu_embed_first_chunk(0, dyn_size, atom_size, pcpu_cpu_distance,
                                    pcpu_fc_alloc, pcpu_fc_free);
        if (rc < 0)
                panic("cannot initialize percpu area (err=%d)", rc);

        delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
        for_each_possible_cpu(cpu)
                paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu];
}
#endif


#ifdef CONFIG_PPC_INDIRECT_IO
struct ppc_pci_io ppc_pci_io;
EXPORT_SYMBOL(ppc_pci_io);
#endif /* CONFIG_PPC_INDIRECT_IO */