linux/arch/powerpc/platforms/85xx/sbc8560.c
<<
>>
Prefs
   1/*
   2 * Wind River SBC8560 setup and early boot code.
   3 *
   4 * Copyright 2007 Wind River Systems Inc.
   5 *
   6 * By Paul Gortmaker (see MAINTAINERS for contact information)
   7 *
   8 * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
   9 *
  10 * This program is free software; you can redistribute  it and/or modify it
  11 * under  the terms of  the GNU General  Public License as published by the
  12 * Free Software Foundation;  either version 2 of the  License, or (at your
  13 * option) any later version.
  14 */
  15
  16#include <linux/stddef.h>
  17#include <linux/kernel.h>
  18#include <linux/pci.h>
  19#include <linux/kdev_t.h>
  20#include <linux/delay.h>
  21#include <linux/seq_file.h>
  22#include <linux/of_platform.h>
  23
  24#include <asm/system.h>
  25#include <asm/time.h>
  26#include <asm/machdep.h>
  27#include <asm/pci-bridge.h>
  28#include <asm/mpic.h>
  29#include <mm/mmu_decl.h>
  30#include <asm/udbg.h>
  31
  32#include <sysdev/fsl_soc.h>
  33#include <sysdev/fsl_pci.h>
  34
  35#ifdef CONFIG_CPM2
  36#include <asm/cpm2.h>
  37#include <sysdev/cpm2_pic.h>
  38#endif
  39
  40#ifdef CONFIG_CPM2
  41
  42static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
  43{
  44        int cascade_irq;
  45
  46        while ((cascade_irq = cpm2_get_irq()) >= 0)
  47                generic_handle_irq(cascade_irq);
  48
  49        desc->chip->eoi(irq);
  50}
  51
  52#endif /* CONFIG_CPM2 */
  53
  54static void __init sbc8560_pic_init(void)
  55{
  56        struct mpic *mpic;
  57        struct resource r;
  58        struct device_node *np = NULL;
  59#ifdef CONFIG_CPM2
  60        int irq;
  61#endif
  62
  63        np = of_find_node_by_type(np, "open-pic");
  64        if (!np) {
  65                printk(KERN_ERR "Could not find open-pic node\n");
  66                return;
  67        }
  68
  69        if (of_address_to_resource(np, 0, &r)) {
  70                printk(KERN_ERR "Could not map mpic register space\n");
  71                of_node_put(np);
  72                return;
  73        }
  74
  75        mpic = mpic_alloc(np, r.start,
  76                        MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
  77                        0, 256, " OpenPIC  ");
  78        BUG_ON(mpic == NULL);
  79        of_node_put(np);
  80
  81        mpic_init(mpic);
  82
  83#ifdef CONFIG_CPM2
  84        /* Setup CPM2 PIC */
  85        np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
  86        if (np == NULL) {
  87                printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
  88                return;
  89        }
  90        irq = irq_of_parse_and_map(np, 0);
  91
  92        cpm2_pic_init(np);
  93        of_node_put(np);
  94        set_irq_chained_handler(irq, cpm2_cascade);
  95#endif
  96}
  97
  98/*
  99 * Setup the architecture
 100 */
 101#ifdef CONFIG_CPM2
 102struct cpm_pin {
 103        int port, pin, flags;
 104};
 105
 106static const struct cpm_pin sbc8560_pins[] = {
 107        /* SCC1 */
 108        {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 109        {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
 110        {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 111
 112        /* SCC2 */
 113        {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 114        {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 115        {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 116
 117        /* FCC2 */
 118        {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 119        {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 120        {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 121        {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 122        {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 123        {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 124        {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 125        {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 126        {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 127        {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 128        {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 129        {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
 130        {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 131        {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 132        {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
 133        {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
 134
 135        /* FCC3 */
 136        {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 137        {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 138        {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 139        {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 140        {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 141        {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 142        {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 143        {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 144        {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 145        {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 146        {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 147        {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 148        {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 149        {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 150        {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
 151        {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
 152};
 153
 154static void __init init_ioports(void)
 155{
 156        int i;
 157
 158        for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
 159                const struct cpm_pin *pin = &sbc8560_pins[i];
 160                cpm2_set_pin(pin->port, pin->pin, pin->flags);
 161        }
 162
 163        cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
 164        cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
 165        cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
 166        cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
 167        cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
 168        cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
 169        cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
 170        cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
 171}
 172#endif
 173
 174static void __init sbc8560_setup_arch(void)
 175{
 176#ifdef CONFIG_PCI
 177        struct device_node *np;
 178#endif
 179
 180        if (ppc_md.progress)
 181                ppc_md.progress("sbc8560_setup_arch()", 0);
 182
 183#ifdef CONFIG_CPM2
 184        cpm2_reset();
 185        init_ioports();
 186#endif
 187
 188#ifdef CONFIG_PCI
 189        for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
 190                fsl_add_bridge(np, 1);
 191#endif
 192}
 193
 194static void sbc8560_show_cpuinfo(struct seq_file *m)
 195{
 196        uint pvid, svid, phid1;
 197
 198        pvid = mfspr(SPRN_PVR);
 199        svid = mfspr(SPRN_SVR);
 200
 201        seq_printf(m, "Vendor\t\t: Wind River\n");
 202        seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
 203        seq_printf(m, "SVR\t\t: 0x%x\n", svid);
 204
 205        /* Display cpu Pll setting */
 206        phid1 = mfspr(SPRN_HID1);
 207        seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 208}
 209
 210static struct of_device_id __initdata of_bus_ids[] = {
 211        { .name = "soc", },
 212        { .type = "soc", },
 213        { .name = "cpm", },
 214        { .name = "localbus", },
 215        { .compatible = "simple-bus", },
 216        { .compatible = "gianfar", },
 217        {},
 218};
 219
 220static int __init declare_of_platform_devices(void)
 221{
 222        of_platform_bus_probe(NULL, of_bus_ids, NULL);
 223
 224        return 0;
 225}
 226machine_device_initcall(sbc8560, declare_of_platform_devices);
 227
 228/*
 229 * Called very early, device-tree isn't unflattened
 230 */
 231static int __init sbc8560_probe(void)
 232{
 233        unsigned long root = of_get_flat_dt_root();
 234
 235        return of_flat_dt_is_compatible(root, "SBC8560");
 236}
 237
 238#ifdef CONFIG_RTC_DRV_M48T59
 239static int __init sbc8560_rtc_init(void)
 240{
 241        struct device_node *np;
 242        struct resource res;
 243        struct platform_device *rtc_dev;
 244
 245        np = of_find_compatible_node(NULL, NULL, "m48t59");
 246        if (np == NULL) {
 247                printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
 248                return -ENODEV;
 249        }
 250
 251        of_address_to_resource(np, 0, &res);
 252        of_node_put(np);
 253
 254        printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
 255
 256        rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
 257
 258        if (IS_ERR(rtc_dev)) {
 259                printk("Registering sbc8560 RTC device failed\n");
 260                return PTR_ERR(rtc_dev);
 261        }
 262
 263        return 0;
 264}
 265
 266arch_initcall(sbc8560_rtc_init);
 267
 268#endif  /* M48T59 */
 269
 270static __u8 __iomem *brstcr;
 271
 272static int __init sbc8560_bdrstcr_init(void)
 273{
 274        struct device_node *np;
 275        struct resource res;
 276
 277        np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
 278        if (np == NULL) {
 279                printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
 280                return -ENODEV;
 281        }
 282
 283        of_address_to_resource(np, 0, &res);
 284
 285        printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
 286
 287        brstcr = ioremap(res.start, res.end - res.start);
 288        if(!brstcr)
 289                printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
 290
 291        of_node_put(np);
 292
 293        return 0;
 294}
 295
 296arch_initcall(sbc8560_bdrstcr_init);
 297
 298void sbc8560_rstcr_restart(char * cmd)
 299{
 300        local_irq_disable();
 301        if(brstcr)
 302                clrbits8(brstcr, 0x80);
 303
 304        while(1);
 305}
 306
 307define_machine(sbc8560) {
 308        .name                   = "SBC8560",
 309        .probe                  = sbc8560_probe,
 310        .setup_arch             = sbc8560_setup_arch,
 311        .init_IRQ               = sbc8560_pic_init,
 312        .show_cpuinfo           = sbc8560_show_cpuinfo,
 313        .get_irq                = mpic_get_irq,
 314        .restart                = sbc8560_rstcr_restart,
 315        .calibrate_decr         = generic_calibrate_decr,
 316        .progress               = udbg_progress,
 317};
 318