LXR linux/arch/powerpc/platforms/chrp/pci.c

   1/*
   2 * CHRP pci routines.
   3 */
   4
   5#include <linux/kernel.h>
   6#include <linux/pci.h>
   7#include <linux/delay.h>
   8#include <linux/string.h>
   9#include <linux/init.h>
  10
  11#include <asm/io.h>
  12#include <asm/pgtable.h>
  13#include <asm/irq.h>
  14#include <asm/hydra.h>
  15#include <asm/prom.h>
  16#include <asm/machdep.h>
  17#include <asm/sections.h>
  18#include <asm/pci-bridge.h>
  19#include <asm/grackle.h>
  20#include <asm/rtas.h>
  21
  22#include "chrp.h"
  23#include "gg2.h"
  24
  25/* LongTrail */
  26void __iomem *gg2_pci_config_base;
  27
  28/*
  29 * The VLSI Golden Gate II has only 512K of PCI configuration space, so we
  30 * limit the bus number to 3 bits
  31 */
  32
  33int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
  34                           int len, u32 *val)
  35{
  36        volatile void __iomem *cfg_data;
  37        struct pci_controller *hose = pci_bus_to_host(bus);
  38
  39        if (bus->number > 7)
  40                return PCIBIOS_DEVICE_NOT_FOUND;
  41        /*
  42         * Note: the caller has already checked that off is
  43         * suitably aligned and that len is 1, 2 or 4.
  44         */
  45        cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
  46        switch (len) {
  47        case 1:
  48                *val =  in_8(cfg_data);
  49                break;
  50        case 2:
  51                *val = in_le16(cfg_data);
  52                break;
  53        default:
  54                *val = in_le32(cfg_data);
  55                break;
  56        }
  57        return PCIBIOS_SUCCESSFUL;
  58}
  59
  60int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
  61                            int len, u32 val)
  62{
  63        volatile void __iomem *cfg_data;
  64        struct pci_controller *hose = pci_bus_to_host(bus);
  65
  66        if (bus->number > 7)
  67                return PCIBIOS_DEVICE_NOT_FOUND;
  68        /*
  69         * Note: the caller has already checked that off is
  70         * suitably aligned and that len is 1, 2 or 4.
  71         */
  72        cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
  73        switch (len) {
  74        case 1:
  75                out_8(cfg_data, val);
  76                break;
  77        case 2:
  78                out_le16(cfg_data, val);
  79                break;
  80        default:
  81                out_le32(cfg_data, val);
  82                break;
  83        }
  84        return PCIBIOS_SUCCESSFUL;
  85}
  86
  87static struct pci_ops gg2_pci_ops =
  88{
  89        .read = gg2_read_config,
  90        .write = gg2_write_config,
  91};
  92
  93/*
  94 * Access functions for PCI config space using RTAS calls.
  95 */
  96int rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
  97                     int len, u32 *val)
  98{
  99        struct pci_controller *hose = pci_bus_to_host(bus);
 100        unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 101                | (((bus->number - hose->first_busno) & 0xff) << 16)
 102                | (hose->global_number << 24);
 103        int ret = -1;
 104        int rval;
 105
 106        rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
 107        *val = ret;
 108        return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
 109}
 110
 111int rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 112                      int len, u32 val)
 113{
 114        struct pci_controller *hose = pci_bus_to_host(bus);
 115        unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
 116                | (((bus->number - hose->first_busno) & 0xff) << 16)
 117                | (hose->global_number << 24);
 118        int rval;
 119
 120        rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
 121                         addr, len, val);
 122        return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
 123}
 124
 125static struct pci_ops rtas_pci_ops =
 126{
 127        .read = rtas_read_config,
 128        .write = rtas_write_config,
 129};
 130
 131volatile struct Hydra __iomem *Hydra = NULL;
 132
 133int __init
 134hydra_init(void)
 135{
 136        struct device_node *np;
 137        struct resource r;
 138
 139        np = of_find_node_by_name(NULL, "mac-io");
 140        if (np == NULL || of_address_to_resource(np, 0, &r)) {
 141                of_node_put(np);
 142                return 0;
 143        }
 144        of_node_put(np);
 145        Hydra = ioremap(r.start, r.end-r.start);
 146        printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start);
 147        printk("Hydra Feature_Control was %x",
 148               in_le32(&Hydra->Feature_Control));
 149        out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN |
 150                                           HYDRA_FC_SCSI_CELL_EN |
 151                                           HYDRA_FC_SCCA_ENABLE |
 152                                           HYDRA_FC_SCCB_ENABLE |
 153                                           HYDRA_FC_ARB_BYPASS |
 154                                           HYDRA_FC_MPIC_ENABLE |
 155                                           HYDRA_FC_SLOW_SCC_PCLK |
 156                                           HYDRA_FC_MPIC_IS_MASTER));
 157        printk(", now %x\n", in_le32(&Hydra->Feature_Control));
 158        return 1;
 159}
 160
 161#define PRG_CL_RESET_VALID 0x00010000
 162
 163static void __init
 164setup_python(struct pci_controller *hose, struct device_node *dev)
 165{
 166        u32 __iomem *reg;
 167        u32 val;
 168        struct resource r;
 169
 170        if (of_address_to_resource(dev, 0, &r)) {
 171                printk(KERN_ERR "No address for Python PCI controller\n");
 172                return;
 173        }
 174
 175        /* Clear the magic go-slow bit */
 176        reg = ioremap(r.start + 0xf6000, 0x40);
 177        BUG_ON(!reg); 
 178        val = in_be32(&reg[12]);
 179        if (val & PRG_CL_RESET_VALID) {
 180                out_be32(&reg[12], val & ~PRG_CL_RESET_VALID);
 181                in_be32(&reg[12]);
 182        }
 183        iounmap(reg);
 184
 185        setup_indirect_pci(hose, r.start + 0xf8000, r.start + 0xf8010, 0);
 186}
 187
 188/* Marvell Discovery II based Pegasos 2 */
 189static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev)
 190{
 191        struct device_node *root = of_find_node_by_path("/");
 192        struct device_node *rtas;
 193
 194        rtas = of_find_node_by_name (root, "rtas");
 195        if (rtas) {
 196                hose->ops = &rtas_pci_ops;
 197                of_node_put(rtas);
 198        } else {
 199                printk ("RTAS supporting Pegasos OF not found, please upgrade"
 200                        " your firmware\n");
 201        }
 202        ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
 203        /* keep the reference to the root node */
 204}
 205
 206void __init
 207chrp_find_bridges(void)
 208{
 209        struct device_node *dev;
 210        const int *bus_range;
 211        int len, index = -1;
 212        struct pci_controller *hose;
 213        const unsigned int *dma;
 214        const char *model, *machine;
 215        int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
 216        struct device_node *root = of_find_node_by_path("/");
 217        struct resource r;
 218        /*
 219         * The PCI host bridge nodes on some machines don't have
 220         * properties to adequately identify them, so we have to
 221         * look at what sort of machine this is as well.
 222         */
 223        machine = of_get_property(root, "model", NULL);
 224        if (machine != NULL) {
 225                is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
 226                is_mot = strncmp(machine, "MOT", 3) == 0;
 227                if (strncmp(machine, "Pegasos2", 8) == 0)
 228                        is_pegasos = 2;
 229                else if (strncmp(machine, "Pegasos", 7) == 0)
 230                        is_pegasos = 1;
 231        }
 232        for (dev = root->child; dev != NULL; dev = dev->sibling) {
 233                if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
 234                        continue;
 235                ++index;
 236                /* The GG2 bridge on the LongTrail doesn't have an address */
 237                if (of_address_to_resource(dev, 0, &r) && !is_longtrail) {
 238                        printk(KERN_WARNING "Can't use %s: no address\n",
 239                               dev->full_name);
 240                        continue;
 241                }
 242                bus_range = of_get_property(dev, "bus-range", &len);
 243                if (bus_range == NULL || len < 2 * sizeof(int)) {
 244                        printk(KERN_WARNING "Can't get bus-range for %s\n",
 245                                dev->full_name);
 246                        continue;
 247                }
 248                if (bus_range[1] == bus_range[0])
 249                        printk(KERN_INFO "PCI bus %d", bus_range[0]);
 250                else
 251                        printk(KERN_INFO "PCI buses %d..%d",
 252                               bus_range[0], bus_range[1]);
 253                printk(" controlled by %s", dev->full_name);
 254                if (!is_longtrail)
 255                        printk(" at %llx", (unsigned long long)r.start);
 256                printk("\n");
 257
 258                hose = pcibios_alloc_controller(dev);
 259                if (!hose) {
 260                        printk("Can't allocate PCI controller structure for %s\n",
 261                                dev->full_name);
 262                        continue;
 263                }
 264                hose->first_busno = hose->self_busno = bus_range[0];
 265                hose->last_busno = bus_range[1];
 266
 267                model = of_get_property(dev, "model", NULL);
 268                if (model == NULL)
 269                        model = "<none>";
 270                if (strncmp(model, "IBM, Python", 11) == 0) {
 271                        setup_python(hose, dev);
 272                } else if (is_mot
 273                           || strncmp(model, "Motorola, Grackle", 17) == 0) {
 274                        setup_grackle(hose);
 275                } else if (is_longtrail) {
 276                        void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
 277                        hose->ops = &gg2_pci_ops;
 278                        hose->cfg_data = p;
 279                        gg2_pci_config_base = p;
 280                } else if (is_pegasos == 1) {
 281                        setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc, 0);
 282                } else if (is_pegasos == 2) {
 283                        setup_peg2(hose, dev);
 284                } else if (!strncmp(model, "IBM,CPC710", 10)) {
 285                        setup_indirect_pci(hose,
 286                                           r.start + 0x000f8000,
 287                                           r.start + 0x000f8010,
 288                                           0);
 289                        if (index == 0) {
 290                                dma = of_get_property(dev, "system-dma-base",
 291                                                        &len);
 292                                if (dma && len >= sizeof(*dma)) {
 293                                        dma = (unsigned int *)
 294                                                (((unsigned long)dma) +
 295                                                len - sizeof(*dma));
 296                                                pci_dram_offset = *dma;
 297                                }
 298                        }
 299                } else {
 300                        printk("No methods for %s (model %s), using RTAS\n",
 301                               dev->full_name, model);
 302                        hose->ops = &rtas_pci_ops;
 303                }
 304
 305                pci_process_bridge_OF_ranges(hose, dev, index == 0);
 306
 307                /* check the first bridge for a property that we can
 308                   use to set pci_dram_offset */
 309                dma = of_get_property(dev, "ibm,dma-ranges", &len);
 310                if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
 311                        pci_dram_offset = dma[2] - dma[3];
 312                        printk("pci_dram_offset = %lx\n", pci_dram_offset);
 313                }
 314        }
 315        of_node_put(root);
 316}
 317
 318/* SL82C105 IDE Control/Status Register */
 319#define SL82C105_IDECSR                0x40
 320
 321/* Fixup for Winbond ATA quirk, required for briq mostly because the
 322 * 8259 is configured for level sensitive IRQ 14 and so wants the
 323 * ATA controller to be set to fully native mode or bad things
 324 * will happen.
 325 */
 326static void __devinit chrp_pci_fixup_winbond_ata(struct pci_dev *sl82c105)
 327{
 328        u8 progif;
 329
 330        /* If non-briq machines need that fixup too, please speak up */
 331        if (!machine_is(chrp) || _chrp_type != _CHRP_briq)
 332                return;
 333
 334        if ((sl82c105->class & 5) != 5) {
 335                printk("W83C553: Switching SL82C105 IDE to PCI native mode\n");
 336                /* Enable SL82C105 PCI native IDE mode */
 337                pci_read_config_byte(sl82c105, PCI_CLASS_PROG, &progif);
 338                pci_write_config_byte(sl82c105, PCI_CLASS_PROG, progif | 0x05);
 339                sl82c105->class |= 0x05;
 340                /* Disable SL82C105 second port */
 341                pci_write_config_word(sl82c105, SL82C105_IDECSR, 0x0003);
 342                /* Clear IO BARs, they will be reassigned */
 343                pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_0, 0);
 344                pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_1, 0);
 345                pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_2, 0);
 346                pci_write_config_dword(sl82c105, PCI_BASE_ADDRESS_3, 0);
 347        }
 348}
 349DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105,
 350                        chrp_pci_fixup_winbond_ata);
 351
 352/* Pegasos2 firmware version 20040810 configures the built-in IDE controller
 353 * in legacy mode, but sets the PCI registers to PCI native mode.
 354 * The chip can only operate in legacy mode, so force the PCI class into legacy
 355 * mode as well. The same fixup must be done to the class-code property in
 356 * the IDE node /pci@80000000/ide@C,1
 357 */
 358static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
 359{
 360        u8 progif;
 361        struct pci_dev *viaisa;
 362
 363        if (!machine_is(chrp) || _chrp_type != _CHRP_Pegasos)
 364                return;
 365        if (viaide->irq != 14)
 366                return;
 367
 368        viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
 369        if (!viaisa)
 370                return;
 371        dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
 372
 373        pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
 374        pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
 375        viaide->class &= ~0x5;
 376
 377        pci_dev_put(viaisa);
 378}
 379DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, chrp_pci_fixup_vt8231_ata);
 380