linux/arch/sh/boards/mach-kfr2r09/setup.c
<<
>>
Prefs
   1/*
   2 * KFR2R09 board support code
   3 *
   4 * Copyright (C) 2009 Magnus Damm
   5 *
   6 * This file is subject to the terms and conditions of the GNU General Public
   7 * License.  See the file "COPYING" in the main directory of this archive
   8 * for more details.
   9 */
  10#include <linux/init.h>
  11#include <linux/platform_device.h>
  12#include <linux/interrupt.h>
  13#include <linux/mtd/physmap.h>
  14#include <linux/mtd/onenand.h>
  15#include <linux/delay.h>
  16#include <linux/clk.h>
  17#include <linux/gpio.h>
  18#include <linux/input.h>
  19#include <linux/i2c.h>
  20#include <linux/usb/r8a66597.h>
  21#include <video/sh_mobile_lcdc.h>
  22#include <asm/clock.h>
  23#include <asm/machvec.h>
  24#include <asm/io.h>
  25#include <asm/sh_keysc.h>
  26#include <cpu/sh7724.h>
  27#include <mach/kfr2r09.h>
  28
  29static struct mtd_partition kfr2r09_nor_flash_partitions[] =
  30{
  31        {
  32                .name = "boot",
  33                .offset = 0,
  34                .size = (4 * 1024 * 1024),
  35                .mask_flags = MTD_WRITEABLE,    /* Read-only */
  36        },
  37        {
  38                .name = "other",
  39                .offset = MTDPART_OFS_APPEND,
  40                .size = MTDPART_SIZ_FULL,
  41        },
  42};
  43
  44static struct physmap_flash_data kfr2r09_nor_flash_data = {
  45        .width          = 2,
  46        .parts          = kfr2r09_nor_flash_partitions,
  47        .nr_parts       = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
  48};
  49
  50static struct resource kfr2r09_nor_flash_resources[] = {
  51        [0] = {
  52                .name           = "NOR Flash",
  53                .start          = 0x00000000,
  54                .end            = 0x03ffffff,
  55                .flags          = IORESOURCE_MEM,
  56        }
  57};
  58
  59static struct platform_device kfr2r09_nor_flash_device = {
  60        .name           = "physmap-flash",
  61        .resource       = kfr2r09_nor_flash_resources,
  62        .num_resources  = ARRAY_SIZE(kfr2r09_nor_flash_resources),
  63        .dev            = {
  64                .platform_data = &kfr2r09_nor_flash_data,
  65        },
  66};
  67
  68static struct resource kfr2r09_nand_flash_resources[] = {
  69        [0] = {
  70                .name           = "NAND Flash",
  71                .start          = 0x10000000,
  72                .end            = 0x1001ffff,
  73                .flags          = IORESOURCE_MEM,
  74        }
  75};
  76
  77static struct platform_device kfr2r09_nand_flash_device = {
  78        .name           = "onenand-flash",
  79        .resource       = kfr2r09_nand_flash_resources,
  80        .num_resources  = ARRAY_SIZE(kfr2r09_nand_flash_resources),
  81};
  82
  83static struct sh_keysc_info kfr2r09_sh_keysc_info = {
  84        .mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
  85        .scan_timing = 3,
  86        .delay = 10,
  87        .keycodes = {
  88                KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
  89                KEY_1, KEY_2, KEY_3, 0, KEY_UP,
  90                KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
  91                KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
  92                KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
  93                0, 0, 0, 0, 0
  94        },
  95};
  96
  97static struct resource kfr2r09_sh_keysc_resources[] = {
  98        [0] = {
  99                .name   = "KEYSC",
 100                .start  = 0x044b0000,
 101                .end    = 0x044b000f,
 102                .flags  = IORESOURCE_MEM,
 103        },
 104        [1] = {
 105                .start  = 79,
 106                .flags  = IORESOURCE_IRQ,
 107        },
 108};
 109
 110static struct platform_device kfr2r09_sh_keysc_device = {
 111        .name           = "sh_keysc",
 112        .id             = 0, /* "keysc0" clock */
 113        .num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
 114        .resource       = kfr2r09_sh_keysc_resources,
 115        .dev    = {
 116                .platform_data  = &kfr2r09_sh_keysc_info,
 117        },
 118        .archdata = {
 119                .hwblk_id = HWBLK_KEYSC,
 120        },
 121};
 122
 123static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 124        .clock_source = LCDC_CLK_BUS,
 125        .ch[0] = {
 126                .chan = LCDC_CHAN_MAINLCD,
 127                .bpp = 16,
 128                .interface_type = SYS18,
 129                .clock_divider = 6,
 130                .flags = LCDC_FLAGS_DWPOL,
 131                .lcd_cfg = {
 132                        .name = "TX07D34VM0AAA",
 133                        .xres = 240,
 134                        .yres = 400,
 135                        .left_margin = 0,
 136                        .right_margin = 16,
 137                        .hsync_len = 8,
 138                        .upper_margin = 0,
 139                        .lower_margin = 1,
 140                        .vsync_len = 1,
 141                        .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 142                },
 143                .lcd_size_cfg = {
 144                        .width = 35,
 145                        .height = 58,
 146                },
 147                .board_cfg = {
 148                        .setup_sys = kfr2r09_lcd_setup,
 149                        .display_on = kfr2r09_lcd_on,
 150                        .display_off = kfr2r09_lcd_off,
 151                },
 152                .sys_bus_cfg = {
 153                        .ldmt2r = 0x07010904,
 154                        .ldmt3r = 0x14012914,
 155                        /* set 1s delay to encourage fsync() */
 156                        .deferred_io_msec = 1000,
 157                },
 158        }
 159};
 160
 161static struct resource kfr2r09_sh_lcdc_resources[] = {
 162        [0] = {
 163                .name   = "LCDC",
 164                .start  = 0xfe940000, /* P4-only space */
 165                .end    = 0xfe942fff,
 166                .flags  = IORESOURCE_MEM,
 167        },
 168        [1] = {
 169                .start  = 106,
 170                .flags  = IORESOURCE_IRQ,
 171        },
 172};
 173
 174static struct platform_device kfr2r09_sh_lcdc_device = {
 175        .name           = "sh_mobile_lcdc_fb",
 176        .num_resources  = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
 177        .resource       = kfr2r09_sh_lcdc_resources,
 178        .dev    = {
 179                .platform_data  = &kfr2r09_sh_lcdc_info,
 180        },
 181        .archdata = {
 182                .hwblk_id = HWBLK_LCDC,
 183        },
 184};
 185
 186static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
 187        .on_chip = 1,
 188};
 189
 190static struct resource kfr2r09_usb0_gadget_resources[] = {
 191        [0] = {
 192                .start  = 0x04d80000,
 193                .end    = 0x04d80123,
 194                .flags  = IORESOURCE_MEM,
 195        },
 196        [1] = {
 197                .start  = 65,
 198                .end    = 65,
 199                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 200        },
 201};
 202
 203static struct platform_device kfr2r09_usb0_gadget_device = {
 204        .name           = "r8a66597_udc",
 205        .id             = 0,
 206        .dev = {
 207                .dma_mask               = NULL,         /*  not use dma */
 208                .coherent_dma_mask      = 0xffffffff,
 209                .platform_data  = &kfr2r09_usb0_gadget_data,
 210        },
 211        .num_resources  = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
 212        .resource       = kfr2r09_usb0_gadget_resources,
 213};
 214
 215static struct platform_device *kfr2r09_devices[] __initdata = {
 216        &kfr2r09_nor_flash_device,
 217        &kfr2r09_nand_flash_device,
 218        &kfr2r09_sh_keysc_device,
 219        &kfr2r09_sh_lcdc_device,
 220};
 221
 222#define BSC_CS0BCR 0xfec10004
 223#define BSC_CS0WCR 0xfec10024
 224#define BSC_CS4BCR 0xfec10010
 225#define BSC_CS4WCR 0xfec10030
 226#define PORT_MSELCRB 0xa4050182
 227
 228#ifdef CONFIG_I2C
 229static int kfr2r09_usb0_gadget_i2c_setup(void)
 230{
 231        struct i2c_adapter *a;
 232        struct i2c_msg msg;
 233        unsigned char buf[2];
 234        int ret;
 235
 236        a = i2c_get_adapter(0);
 237        if (!a)
 238                return -ENODEV;
 239
 240        /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
 241        buf[0] = 0x13;
 242        msg.addr = 0x09;
 243        msg.buf = buf;
 244        msg.len = 1;
 245        msg.flags = 0;
 246        ret = i2c_transfer(a, &msg, 1);
 247        if (ret != 1)
 248                return -ENODEV;
 249
 250        buf[0] = 0;
 251        msg.addr = 0x09;
 252        msg.buf = buf;
 253        msg.len = 1;
 254        msg.flags = I2C_M_RD;
 255        ret = i2c_transfer(a, &msg, 1);
 256        if (ret != 1)
 257                return -ENODEV;
 258
 259        buf[1] = buf[0] | (1 << 1);
 260        buf[0] = 0x13;
 261        msg.addr = 0x09;
 262        msg.buf = buf;
 263        msg.len = 2;
 264        msg.flags = 0;
 265        ret = i2c_transfer(a, &msg, 1);
 266        if (ret != 1)
 267                return -ENODEV;
 268
 269        return 0;
 270}
 271#else
 272static int kfr2r09_usb0_gadget_i2c_setup(void)
 273{
 274        return -ENODEV;
 275}
 276#endif
 277
 278static int kfr2r09_usb0_gadget_setup(void)
 279{
 280        int plugged_in;
 281
 282        gpio_request(GPIO_PTN4, NULL); /* USB_DET */
 283        gpio_direction_input(GPIO_PTN4);
 284        plugged_in = gpio_get_value(GPIO_PTN4);
 285        if (!plugged_in)
 286                return -ENODEV; /* no cable plugged in */
 287
 288        if (kfr2r09_usb0_gadget_i2c_setup() != 0)
 289                return -ENODEV; /* unable to configure using i2c */
 290
 291        ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 292        gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
 293        gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
 294        gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
 295        msleep(20); /* wait 20ms to let the clock settle */
 296        clk_enable(clk_get(NULL, "usb0"));
 297        ctrl_outw(0x0600, 0xa40501d4);
 298
 299        return 0;
 300}
 301
 302static int __init kfr2r09_devices_setup(void)
 303{
 304        /* enable SCIF1 serial port for YC401 console support */
 305        gpio_request(GPIO_FN_SCIF1_RXD, NULL);
 306        gpio_request(GPIO_FN_SCIF1_TXD, NULL);
 307
 308        /* setup NOR flash at CS0 */
 309        ctrl_outl(0x36db0400, BSC_CS0BCR);
 310        ctrl_outl(0x00000500, BSC_CS0WCR);
 311
 312        /* setup NAND flash at CS4 */
 313        ctrl_outl(0x36db0400, BSC_CS4BCR);
 314        ctrl_outl(0x00000500, BSC_CS4WCR);
 315
 316        /* setup KEYSC pins */
 317        gpio_request(GPIO_FN_KEYOUT0, NULL);
 318        gpio_request(GPIO_FN_KEYOUT1, NULL);
 319        gpio_request(GPIO_FN_KEYOUT2, NULL);
 320        gpio_request(GPIO_FN_KEYOUT3, NULL);
 321        gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
 322        gpio_request(GPIO_FN_KEYIN0, NULL);
 323        gpio_request(GPIO_FN_KEYIN1, NULL);
 324        gpio_request(GPIO_FN_KEYIN2, NULL);
 325        gpio_request(GPIO_FN_KEYIN3, NULL);
 326        gpio_request(GPIO_FN_KEYIN4, NULL);
 327        gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
 328
 329        /* setup LCDC pins for SYS panel */
 330        gpio_request(GPIO_FN_LCDD17, NULL);
 331        gpio_request(GPIO_FN_LCDD16, NULL);
 332        gpio_request(GPIO_FN_LCDD15, NULL);
 333        gpio_request(GPIO_FN_LCDD14, NULL);
 334        gpio_request(GPIO_FN_LCDD13, NULL);
 335        gpio_request(GPIO_FN_LCDD12, NULL);
 336        gpio_request(GPIO_FN_LCDD11, NULL);
 337        gpio_request(GPIO_FN_LCDD10, NULL);
 338        gpio_request(GPIO_FN_LCDD9, NULL);
 339        gpio_request(GPIO_FN_LCDD8, NULL);
 340        gpio_request(GPIO_FN_LCDD7, NULL);
 341        gpio_request(GPIO_FN_LCDD6, NULL);
 342        gpio_request(GPIO_FN_LCDD5, NULL);
 343        gpio_request(GPIO_FN_LCDD4, NULL);
 344        gpio_request(GPIO_FN_LCDD3, NULL);
 345        gpio_request(GPIO_FN_LCDD2, NULL);
 346        gpio_request(GPIO_FN_LCDD1, NULL);
 347        gpio_request(GPIO_FN_LCDD0, NULL);
 348        gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
 349        gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
 350        gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
 351        gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
 352        gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
 353        gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
 354        gpio_direction_output(GPIO_PTE4, 1);
 355        gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
 356        gpio_direction_output(GPIO_PTF4, 1);
 357        gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
 358        gpio_direction_output(GPIO_PTU0, 1);
 359
 360        /* setup USB function */
 361        if (kfr2r09_usb0_gadget_setup() == 0)
 362                platform_device_register(&kfr2r09_usb0_gadget_device);
 363
 364        return platform_add_devices(kfr2r09_devices,
 365                                    ARRAY_SIZE(kfr2r09_devices));
 366}
 367device_initcall(kfr2r09_devices_setup);
 368
 369/* Return the board specific boot mode pin configuration */
 370static int kfr2r09_mode_pins(void)
 371{
 372        /* MD0=1, MD1=1, MD2=0: Clock Mode 3
 373         * MD3=0: 16-bit Area0 Bus Width
 374         * MD5=1: Little Endian
 375         * MD8=1: Test Mode Disabled
 376         */
 377        return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
 378}
 379
 380/*
 381 * The Machine Vector
 382 */
 383static struct sh_machine_vector mv_kfr2r09 __initmv = {
 384        .mv_name                = "kfr2r09",
 385        .mv_mode_pins           = kfr2r09_mode_pins,
 386};
 387