linux/drivers/ata/sata_uli.c
<<
>>
Prefs
   1/*
   2 *  sata_uli.c - ULi Electronics SATA
   3 *
   4 *
   5 *  This program is free software; you can redistribute it and/or modify
   6 *  it under the terms of the GNU General Public License as published by
   7 *  the Free Software Foundation; either version 2, or (at your option)
   8 *  any later version.
   9 *
  10 *  This program is distributed in the hope that it will be useful,
  11 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 *  GNU General Public License for more details.
  14 *
  15 *  You should have received a copy of the GNU General Public License
  16 *  along with this program; see the file COPYING.  If not, write to
  17 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  18 *
  19 *
  20 *  libata documentation is available via 'make {ps|pdf}docs',
  21 *  as Documentation/DocBook/libata.*
  22 *
  23 *  Hardware documentation available under NDA.
  24 *
  25 */
  26
  27#include <linux/kernel.h>
  28#include <linux/module.h>
  29#include <linux/pci.h>
  30#include <linux/init.h>
  31#include <linux/blkdev.h>
  32#include <linux/delay.h>
  33#include <linux/interrupt.h>
  34#include <linux/device.h>
  35#include <scsi/scsi_host.h>
  36#include <linux/libata.h>
  37
  38#define DRV_NAME        "sata_uli"
  39#define DRV_VERSION     "1.3"
  40
  41enum {
  42        uli_5289                = 0,
  43        uli_5287                = 1,
  44        uli_5281                = 2,
  45
  46        uli_max_ports           = 4,
  47
  48        /* PCI configuration registers */
  49        ULI5287_BASE            = 0x90, /* sata0 phy SCR registers */
  50        ULI5287_OFFS            = 0x10, /* offset from sata0->sata1 phy regs */
  51        ULI5281_BASE            = 0x60, /* sata0 phy SCR  registers */
  52        ULI5281_OFFS            = 0x60, /* offset from sata0->sata1 phy regs */
  53};
  54
  55struct uli_priv {
  56        unsigned int            scr_cfg_addr[uli_max_ports];
  57};
  58
  59static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
  60static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
  61static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
  62
  63static const struct pci_device_id uli_pci_tbl[] = {
  64        { PCI_VDEVICE(AL, 0x5289), uli_5289 },
  65        { PCI_VDEVICE(AL, 0x5287), uli_5287 },
  66        { PCI_VDEVICE(AL, 0x5281), uli_5281 },
  67
  68        { }     /* terminate list */
  69};
  70
  71static struct pci_driver uli_pci_driver = {
  72        .name                   = DRV_NAME,
  73        .id_table               = uli_pci_tbl,
  74        .probe                  = uli_init_one,
  75        .remove                 = ata_pci_remove_one,
  76};
  77
  78static struct scsi_host_template uli_sht = {
  79        ATA_BMDMA_SHT(DRV_NAME),
  80};
  81
  82static struct ata_port_operations uli_ops = {
  83        .inherits               = &ata_bmdma_port_ops,
  84        .scr_read               = uli_scr_read,
  85        .scr_write              = uli_scr_write,
  86        .hardreset              = ATA_OP_NULL,
  87};
  88
  89static const struct ata_port_info uli_port_info = {
  90        .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
  91                          ATA_FLAG_IGN_SIMPLEX,
  92        .pio_mask       = ATA_PIO4,
  93        .udma_mask      = ATA_UDMA6,
  94        .port_ops       = &uli_ops,
  95};
  96
  97
  98MODULE_AUTHOR("Peer Chen");
  99MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller");
 100MODULE_LICENSE("GPL");
 101MODULE_DEVICE_TABLE(pci, uli_pci_tbl);
 102MODULE_VERSION(DRV_VERSION);
 103
 104static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
 105{
 106        struct uli_priv *hpriv = ap->host->private_data;
 107        return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg);
 108}
 109
 110static u32 uli_scr_cfg_read(struct ata_link *link, unsigned int sc_reg)
 111{
 112        struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
 113        unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg);
 114        u32 val;
 115
 116        pci_read_config_dword(pdev, cfg_addr, &val);
 117        return val;
 118}
 119
 120static void uli_scr_cfg_write(struct ata_link *link, unsigned int scr, u32 val)
 121{
 122        struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
 123        unsigned int cfg_addr = get_scr_cfg_addr(link->ap, scr);
 124
 125        pci_write_config_dword(pdev, cfg_addr, val);
 126}
 127
 128static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
 129{
 130        if (sc_reg > SCR_CONTROL)
 131                return -EINVAL;
 132
 133        *val = uli_scr_cfg_read(link, sc_reg);
 134        return 0;
 135}
 136
 137static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
 138{
 139        if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0
 140                return -EINVAL;
 141
 142        uli_scr_cfg_write(link, sc_reg, val);
 143        return 0;
 144}
 145
 146static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 147{
 148        static int printed_version;
 149        const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
 150        unsigned int board_idx = (unsigned int) ent->driver_data;
 151        struct ata_host *host;
 152        struct uli_priv *hpriv;
 153        void __iomem * const *iomap;
 154        struct ata_ioports *ioaddr;
 155        int n_ports, rc;
 156
 157        if (!printed_version++)
 158                dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 159
 160        rc = pcim_enable_device(pdev);
 161        if (rc)
 162                return rc;
 163
 164        n_ports = 2;
 165        if (board_idx == uli_5287)
 166                n_ports = 4;
 167
 168        /* allocate the host */
 169        host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 170        if (!host)
 171                return -ENOMEM;
 172
 173        hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
 174        if (!hpriv)
 175                return -ENOMEM;
 176        host->private_data = hpriv;
 177
 178        /* the first two ports are standard SFF */
 179        rc = ata_pci_sff_init_host(host);
 180        if (rc)
 181                return rc;
 182
 183        rc = ata_pci_bmdma_init(host);
 184        if (rc)
 185                return rc;
 186
 187        iomap = host->iomap;
 188
 189        switch (board_idx) {
 190        case uli_5287:
 191                /* If there are four, the last two live right after
 192                 * the standard SFF ports.
 193                 */
 194                hpriv->scr_cfg_addr[0] = ULI5287_BASE;
 195                hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
 196
 197                ioaddr = &host->ports[2]->ioaddr;
 198                ioaddr->cmd_addr = iomap[0] + 8;
 199                ioaddr->altstatus_addr =
 200                ioaddr->ctl_addr = (void __iomem *)
 201                        ((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
 202                ioaddr->bmdma_addr = iomap[4] + 16;
 203                hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
 204                ata_sff_std_ports(ioaddr);
 205
 206                ata_port_desc(host->ports[2],
 207                        "cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
 208                        (unsigned long long)pci_resource_start(pdev, 0) + 8,
 209                        ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4,
 210                        (unsigned long long)pci_resource_start(pdev, 4) + 16);
 211
 212                ioaddr = &host->ports[3]->ioaddr;
 213                ioaddr->cmd_addr = iomap[2] + 8;
 214                ioaddr->altstatus_addr =
 215                ioaddr->ctl_addr = (void __iomem *)
 216                        ((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
 217                ioaddr->bmdma_addr = iomap[4] + 24;
 218                hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
 219                ata_sff_std_ports(ioaddr);
 220
 221                ata_port_desc(host->ports[2],
 222                        "cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
 223                        (unsigned long long)pci_resource_start(pdev, 2) + 9,
 224                        ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4,
 225                        (unsigned long long)pci_resource_start(pdev, 4) + 24);
 226
 227                break;
 228
 229        case uli_5289:
 230                hpriv->scr_cfg_addr[0] = ULI5287_BASE;
 231                hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
 232                break;
 233
 234        case uli_5281:
 235                hpriv->scr_cfg_addr[0] = ULI5281_BASE;
 236                hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS;
 237                break;
 238
 239        default:
 240                BUG();
 241                break;
 242        }
 243
 244        pci_set_master(pdev);
 245        pci_intx(pdev, 1);
 246        return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
 247                                 IRQF_SHARED, &uli_sht);
 248}
 249
 250static int __init uli_init(void)
 251{
 252        return pci_register_driver(&uli_pci_driver);
 253}
 254
 255static void __exit uli_exit(void)
 256{
 257        pci_unregister_driver(&uli_pci_driver);
 258}
 259
 260
 261module_init(uli_init);
 262module_exit(uli_exit);
 263