linux/drivers/ide/ide.c
<<
>>
Prefs
   1/*
   2 *  Copyright (C) 1994-1998         Linus Torvalds & authors (see below)
   3 *  Copyright (C) 2003-2005, 2007   Bartlomiej Zolnierkiewicz
   4 */
   5
   6/*
   7 *  Mostly written by Mark Lord  <mlord@pobox.com>
   8 *                and Gadi Oxman <gadio@netvision.net.il>
   9 *                and Andre Hedrick <andre@linux-ide.org>
  10 *
  11 *  See linux/MAINTAINERS for address of current maintainer.
  12 *
  13 * This is the multiple IDE interface driver, as evolved from hd.c.
  14 * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
  15 *   (usually 14 & 15).
  16 * There can be up to two drives per interface, as per the ATA-2 spec.
  17 *
  18 * ...
  19 *
  20 *  From hd.c:
  21 *  |
  22 *  | It traverses the request-list, using interrupts to jump between functions.
  23 *  | As nearly all functions can be called within interrupts, we may not sleep.
  24 *  | Special care is recommended.  Have Fun!
  25 *  |
  26 *  | modified by Drew Eckhardt to check nr of hd's from the CMOS.
  27 *  |
  28 *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
  29 *  | in the early extended-partition checks and added DM partitions.
  30 *  |
  31 *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
  32 *  |
  33 *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
  34 *  | and general streamlining by Mark Lord (mlord@pobox.com).
  35 *
  36 *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
  37 *
  38 *      Mark Lord       (mlord@pobox.com)               (IDE Perf.Pkg)
  39 *      Delman Lee      (delman@ieee.org)               ("Mr. atdisk2")
  40 *      Scott Snyder    (snyder@fnald0.fnal.gov)        (ATAPI IDE cd-rom)
  41 *
  42 *  This was a rewrite of just about everything from hd.c, though some original
  43 *  code is still sprinkled about.  Think of it as a major evolution, with
  44 *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
  45 */
  46
  47#include <linux/module.h>
  48#include <linux/types.h>
  49#include <linux/string.h>
  50#include <linux/kernel.h>
  51#include <linux/interrupt.h>
  52#include <linux/major.h>
  53#include <linux/errno.h>
  54#include <linux/genhd.h>
  55#include <linux/slab.h>
  56#include <linux/init.h>
  57#include <linux/pci.h>
  58#include <linux/ide.h>
  59#include <linux/hdreg.h>
  60#include <linux/completion.h>
  61#include <linux/device.h>
  62
  63struct class *ide_port_class;
  64
  65/**
  66 * ide_device_get       -       get an additional reference to a ide_drive_t
  67 * @drive:      device to get a reference to
  68 *
  69 * Gets a reference to the ide_drive_t and increments the use count of the
  70 * underlying LLDD module.
  71 */
  72int ide_device_get(ide_drive_t *drive)
  73{
  74        struct device *host_dev;
  75        struct module *module;
  76
  77        if (!get_device(&drive->gendev))
  78                return -ENXIO;
  79
  80        host_dev = drive->hwif->host->dev[0];
  81        module = host_dev ? host_dev->driver->owner : NULL;
  82
  83        if (module && !try_module_get(module)) {
  84                put_device(&drive->gendev);
  85                return -ENXIO;
  86        }
  87
  88        return 0;
  89}
  90EXPORT_SYMBOL_GPL(ide_device_get);
  91
  92/**
  93 * ide_device_put       -       release a reference to a ide_drive_t
  94 * @drive:      device to release a reference on
  95 *
  96 * Release a reference to the ide_drive_t and decrements the use count of
  97 * the underlying LLDD module.
  98 */
  99void ide_device_put(ide_drive_t *drive)
 100{
 101#ifdef CONFIG_MODULE_UNLOAD
 102        struct device *host_dev = drive->hwif->host->dev[0];
 103        struct module *module = host_dev ? host_dev->driver->owner : NULL;
 104
 105        if (module)
 106                module_put(module);
 107#endif
 108        put_device(&drive->gendev);
 109}
 110EXPORT_SYMBOL_GPL(ide_device_put);
 111
 112static int ide_bus_match(struct device *dev, struct device_driver *drv)
 113{
 114        return 1;
 115}
 116
 117static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
 118{
 119        ide_drive_t *drive = to_ide_device(dev);
 120
 121        add_uevent_var(env, "MEDIA=%s", ide_media_string(drive));
 122        add_uevent_var(env, "DRIVENAME=%s", drive->name);
 123        add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive));
 124        return 0;
 125}
 126
 127static int generic_ide_probe(struct device *dev)
 128{
 129        ide_drive_t *drive = to_ide_device(dev);
 130        struct ide_driver *drv = to_ide_driver(dev->driver);
 131
 132        return drv->probe ? drv->probe(drive) : -ENODEV;
 133}
 134
 135static int generic_ide_remove(struct device *dev)
 136{
 137        ide_drive_t *drive = to_ide_device(dev);
 138        struct ide_driver *drv = to_ide_driver(dev->driver);
 139
 140        if (drv->remove)
 141                drv->remove(drive);
 142
 143        return 0;
 144}
 145
 146static void generic_ide_shutdown(struct device *dev)
 147{
 148        ide_drive_t *drive = to_ide_device(dev);
 149        struct ide_driver *drv = to_ide_driver(dev->driver);
 150
 151        if (dev->driver && drv->shutdown)
 152                drv->shutdown(drive);
 153}
 154
 155struct bus_type ide_bus_type = {
 156        .name           = "ide",
 157        .match          = ide_bus_match,
 158        .uevent         = ide_uevent,
 159        .probe          = generic_ide_probe,
 160        .remove         = generic_ide_remove,
 161        .shutdown       = generic_ide_shutdown,
 162        .dev_attrs      = ide_dev_attrs,
 163        .suspend        = generic_ide_suspend,
 164        .resume         = generic_ide_resume,
 165};
 166
 167EXPORT_SYMBOL_GPL(ide_bus_type);
 168
 169int ide_vlb_clk;
 170EXPORT_SYMBOL_GPL(ide_vlb_clk);
 171
 172module_param_named(vlb_clock, ide_vlb_clk, int, 0);
 173MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)");
 174
 175int ide_pci_clk;
 176EXPORT_SYMBOL_GPL(ide_pci_clk);
 177
 178module_param_named(pci_clock, ide_pci_clk, int, 0);
 179MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)");
 180
 181static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp)
 182{
 183        int a, b, i, j = 1;
 184        unsigned int *dev_param_mask = (unsigned int *)kp->arg;
 185
 186        /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
 187        if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
 188            sscanf(s, "%d.%d", &a, &b) != 2)
 189                return -EINVAL;
 190
 191        i = a * MAX_DRIVES + b;
 192
 193        if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
 194                return -EINVAL;
 195
 196        if (j)
 197                *dev_param_mask |= (1 << i);
 198        else
 199                *dev_param_mask &= ~(1 << i);
 200
 201        return 0;
 202}
 203
 204static unsigned int ide_nodma;
 205
 206module_param_call(nodma, ide_set_dev_param_mask, NULL, &ide_nodma, 0);
 207MODULE_PARM_DESC(nodma, "disallow DMA for a device");
 208
 209static unsigned int ide_noflush;
 210
 211module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0);
 212MODULE_PARM_DESC(noflush, "disable flush requests for a device");
 213
 214static unsigned int ide_nohpa;
 215
 216module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0);
 217MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
 218
 219static unsigned int ide_noprobe;
 220
 221module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0);
 222MODULE_PARM_DESC(noprobe, "skip probing for a device");
 223
 224static unsigned int ide_nowerr;
 225
 226module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0);
 227MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device");
 228
 229static unsigned int ide_cdroms;
 230
 231module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0);
 232MODULE_PARM_DESC(cdrom, "force device as a CD-ROM");
 233
 234struct chs_geom {
 235        unsigned int    cyl;
 236        u8              head;
 237        u8              sect;
 238};
 239
 240static unsigned int ide_disks;
 241static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES];
 242
 243static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
 244{
 245        int a, b, c = 0, h = 0, s = 0, i, j = 1;
 246
 247        /* controller . device (0 or 1) : Cylinders , Heads , Sectors */
 248        /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
 249        if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
 250            sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
 251                return -EINVAL;
 252
 253        i = a * MAX_DRIVES + b;
 254
 255        if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
 256                return -EINVAL;
 257
 258        if (c > INT_MAX || h > 255 || s > 255)
 259                return -EINVAL;
 260
 261        if (j)
 262                ide_disks |= (1 << i);
 263        else
 264                ide_disks &= ~(1 << i);
 265
 266        ide_disks_chs[i].cyl  = c;
 267        ide_disks_chs[i].head = h;
 268        ide_disks_chs[i].sect = s;
 269
 270        return 0;
 271}
 272
 273module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0);
 274MODULE_PARM_DESC(chs, "force device as a disk (using CHS)");
 275
 276static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
 277{
 278        int i = drive->hwif->index * MAX_DRIVES + unit;
 279
 280        if (ide_nodma & (1 << i)) {
 281                printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name);
 282                drive->dev_flags |= IDE_DFLAG_NODMA;
 283        }
 284        if (ide_noflush & (1 << i)) {
 285                printk(KERN_INFO "ide: disabling flush requests for %s\n",
 286                                 drive->name);
 287                drive->dev_flags |= IDE_DFLAG_NOFLUSH;
 288        }
 289        if (ide_nohpa & (1 << i)) {
 290                printk(KERN_INFO "ide: disabling Host Protected Area for %s\n",
 291                                 drive->name);
 292                drive->dev_flags |= IDE_DFLAG_NOHPA;
 293        }
 294        if (ide_noprobe & (1 << i)) {
 295                printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
 296                drive->dev_flags |= IDE_DFLAG_NOPROBE;
 297        }
 298        if (ide_nowerr & (1 << i)) {
 299                printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
 300                                 drive->name);
 301                drive->bad_wstat = BAD_R_STAT;
 302        }
 303        if (ide_cdroms & (1 << i)) {
 304                printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name);
 305                drive->dev_flags |= IDE_DFLAG_PRESENT;
 306                drive->media = ide_cdrom;
 307                /* an ATAPI device ignores DRDY */
 308                drive->ready_stat = 0;
 309        }
 310        if (ide_disks & (1 << i)) {
 311                drive->cyl  = drive->bios_cyl  = ide_disks_chs[i].cyl;
 312                drive->head = drive->bios_head = ide_disks_chs[i].head;
 313                drive->sect = drive->bios_sect = ide_disks_chs[i].sect;
 314
 315                printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n",
 316                                 drive->name,
 317                                 drive->cyl, drive->head, drive->sect);
 318
 319                drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT;
 320                drive->media = ide_disk;
 321                drive->ready_stat = ATA_DRDY;
 322        }
 323}
 324
 325static unsigned int ide_ignore_cable;
 326
 327static int ide_set_ignore_cable(const char *s, struct kernel_param *kp)
 328{
 329        int i, j = 1;
 330
 331        /* controller (ignore) */
 332        /* controller : 1 (ignore) | 0 (use) */
 333        if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
 334                return -EINVAL;
 335
 336        if (i >= MAX_HWIFS || j < 0 || j > 1)
 337                return -EINVAL;
 338
 339        if (j)
 340                ide_ignore_cable |= (1 << i);
 341        else
 342                ide_ignore_cable &= ~(1 << i);
 343
 344        return 0;
 345}
 346
 347module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0);
 348MODULE_PARM_DESC(ignore_cable, "ignore cable detection");
 349
 350void ide_port_apply_params(ide_hwif_t *hwif)
 351{
 352        ide_drive_t *drive;
 353        int i;
 354
 355        if (ide_ignore_cable & (1 << hwif->index)) {
 356                printk(KERN_INFO "ide: ignoring cable detection for %s\n",
 357                                 hwif->name);
 358                hwif->cbl = ATA_CBL_PATA40_SHORT;
 359        }
 360
 361        ide_port_for_each_dev(i, drive, hwif)
 362                ide_dev_apply_params(drive, i);
 363}
 364
 365/*
 366 * This is gets invoked once during initialization, to set *everything* up
 367 */
 368static int __init ide_init(void)
 369{
 370        int ret;
 371
 372        printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
 373
 374        ret = bus_register(&ide_bus_type);
 375        if (ret < 0) {
 376                printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
 377                return ret;
 378        }
 379
 380        ide_port_class = class_create(THIS_MODULE, "ide_port");
 381        if (IS_ERR(ide_port_class)) {
 382                ret = PTR_ERR(ide_port_class);
 383                goto out_port_class;
 384        }
 385
 386        ide_acpi_init();
 387
 388        proc_ide_create();
 389
 390        return 0;
 391
 392out_port_class:
 393        bus_unregister(&ide_bus_type);
 394
 395        return ret;
 396}
 397
 398static void __exit ide_exit(void)
 399{
 400        proc_ide_destroy();
 401
 402        class_destroy(ide_port_class);
 403
 404        bus_unregister(&ide_bus_type);
 405}
 406
 407module_init(ide_init);
 408module_exit(ide_exit);
 409
 410MODULE_LICENSE("GPL");
 411