linux/drivers/input/misc/ati_remote2.c
<<
>>
Prefs
   1/*
   2 * ati_remote2 - ATI/Philips USB RF remote driver
   3 *
   4 * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi>
   5 * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk>
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License version 2
   9 * as published by the Free Software Foundation.
  10 */
  11
  12#include <linux/usb/input.h>
  13
  14#define DRIVER_DESC    "ATI/Philips USB RF remote driver"
  15#define DRIVER_VERSION "0.3"
  16
  17MODULE_DESCRIPTION(DRIVER_DESC);
  18MODULE_VERSION(DRIVER_VERSION);
  19MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
  20MODULE_LICENSE("GPL");
  21
  22/*
  23 * ATI Remote Wonder II Channel Configuration
  24 *
  25 * The remote control can by assigned one of sixteen "channels" in order to facilitate
  26 * the use of multiple remote controls within range of each other.
  27 * A remote's "channel" may be altered by pressing and holding the "PC" button for
  28 * approximately 3 seconds, after which the button will slowly flash the count of the
  29 * currently configured "channel", using the numeric keypad enter a number between 1 and
  30 * 16 and then press the "PC" button again, the button will slowly flash the count of the
  31 * newly configured "channel".
  32 */
  33
  34enum {
  35        ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
  36        ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
  37};
  38
  39static int ati_remote2_set_mask(const char *val,
  40                                struct kernel_param *kp, unsigned int max)
  41{
  42        unsigned long mask;
  43        int ret;
  44
  45        if (!val)
  46                return -EINVAL;
  47
  48        ret = strict_strtoul(val, 0, &mask);
  49        if (ret)
  50                return ret;
  51
  52        if (mask & ~max)
  53                return -EINVAL;
  54
  55        *(unsigned int *)kp->arg = mask;
  56
  57        return 0;
  58}
  59
  60static int ati_remote2_set_channel_mask(const char *val,
  61                                        struct kernel_param *kp)
  62{
  63        pr_debug("%s()\n", __func__);
  64
  65        return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
  66}
  67
  68static int ati_remote2_get_channel_mask(char *buffer, struct kernel_param *kp)
  69{
  70        pr_debug("%s()\n", __func__);
  71
  72        return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
  73}
  74
  75static int ati_remote2_set_mode_mask(const char *val, struct kernel_param *kp)
  76{
  77        pr_debug("%s()\n", __func__);
  78
  79        return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
  80}
  81
  82static int ati_remote2_get_mode_mask(char *buffer, struct kernel_param *kp)
  83{
  84        pr_debug("%s()\n", __func__);
  85
  86        return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg);
  87}
  88
  89static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
  90#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
  91#define param_set_channel_mask ati_remote2_set_channel_mask
  92#define param_get_channel_mask ati_remote2_get_channel_mask
  93module_param(channel_mask, channel_mask, 0644);
  94MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
  95
  96static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
  97#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
  98#define param_set_mode_mask ati_remote2_set_mode_mask
  99#define param_get_mode_mask ati_remote2_get_mode_mask
 100module_param(mode_mask, mode_mask, 0644);
 101MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
 102
 103static struct usb_device_id ati_remote2_id_table[] = {
 104        { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
 105        { }
 106};
 107MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
 108
 109static DEFINE_MUTEX(ati_remote2_mutex);
 110
 111enum {
 112        ATI_REMOTE2_OPENED = 0x1,
 113        ATI_REMOTE2_SUSPENDED = 0x2,
 114};
 115
 116enum {
 117        ATI_REMOTE2_AUX1,
 118        ATI_REMOTE2_AUX2,
 119        ATI_REMOTE2_AUX3,
 120        ATI_REMOTE2_AUX4,
 121        ATI_REMOTE2_PC,
 122        ATI_REMOTE2_MODES,
 123};
 124
 125static const struct {
 126        u8  hw_code;
 127        u16 keycode;
 128} ati_remote2_key_table[] = {
 129        { 0x00, KEY_0 },
 130        { 0x01, KEY_1 },
 131        { 0x02, KEY_2 },
 132        { 0x03, KEY_3 },
 133        { 0x04, KEY_4 },
 134        { 0x05, KEY_5 },
 135        { 0x06, KEY_6 },
 136        { 0x07, KEY_7 },
 137        { 0x08, KEY_8 },
 138        { 0x09, KEY_9 },
 139        { 0x0c, KEY_POWER },
 140        { 0x0d, KEY_MUTE },
 141        { 0x10, KEY_VOLUMEUP },
 142        { 0x11, KEY_VOLUMEDOWN },
 143        { 0x20, KEY_CHANNELUP },
 144        { 0x21, KEY_CHANNELDOWN },
 145        { 0x28, KEY_FORWARD },
 146        { 0x29, KEY_REWIND },
 147        { 0x2c, KEY_PLAY },
 148        { 0x30, KEY_PAUSE },
 149        { 0x31, KEY_STOP },
 150        { 0x37, KEY_RECORD },
 151        { 0x38, KEY_DVD },
 152        { 0x39, KEY_TV },
 153        { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */
 154        { 0x54, KEY_MENU },
 155        { 0x58, KEY_UP },
 156        { 0x59, KEY_DOWN },
 157        { 0x5a, KEY_LEFT },
 158        { 0x5b, KEY_RIGHT },
 159        { 0x5c, KEY_OK },
 160        { 0x78, KEY_A },
 161        { 0x79, KEY_B },
 162        { 0x7a, KEY_C },
 163        { 0x7b, KEY_D },
 164        { 0x7c, KEY_E },
 165        { 0x7d, KEY_F },
 166        { 0x82, KEY_ENTER },
 167        { 0x8e, KEY_VENDOR },
 168        { 0x96, KEY_COFFEE },
 169        { 0xa9, BTN_LEFT },
 170        { 0xaa, BTN_RIGHT },
 171        { 0xbe, KEY_QUESTION },
 172        { 0xd0, KEY_EDIT },
 173        { 0xd5, KEY_FRONT },
 174        { 0xf9, KEY_INFO },
 175};
 176
 177struct ati_remote2 {
 178        struct input_dev *idev;
 179        struct usb_device *udev;
 180
 181        struct usb_interface *intf[2];
 182        struct usb_endpoint_descriptor *ep[2];
 183        struct urb *urb[2];
 184        void *buf[2];
 185        dma_addr_t buf_dma[2];
 186
 187        unsigned long jiffies;
 188        int mode;
 189
 190        char name[64];
 191        char phys[64];
 192
 193        /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */
 194        u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
 195
 196        unsigned int flags;
 197
 198        unsigned int channel_mask;
 199        unsigned int mode_mask;
 200};
 201
 202static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
 203static void ati_remote2_disconnect(struct usb_interface *interface);
 204static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
 205static int ati_remote2_resume(struct usb_interface *interface);
 206static int ati_remote2_reset_resume(struct usb_interface *interface);
 207static int ati_remote2_pre_reset(struct usb_interface *interface);
 208static int ati_remote2_post_reset(struct usb_interface *interface);
 209
 210static struct usb_driver ati_remote2_driver = {
 211        .name       = "ati_remote2",
 212        .probe      = ati_remote2_probe,
 213        .disconnect = ati_remote2_disconnect,
 214        .id_table   = ati_remote2_id_table,
 215        .suspend    = ati_remote2_suspend,
 216        .resume     = ati_remote2_resume,
 217        .reset_resume = ati_remote2_reset_resume,
 218        .pre_reset  = ati_remote2_pre_reset,
 219        .post_reset = ati_remote2_post_reset,
 220        .supports_autosuspend = 1,
 221};
 222
 223static int ati_remote2_submit_urbs(struct ati_remote2 *ar2)
 224{
 225        int r;
 226
 227        r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
 228        if (r) {
 229                dev_err(&ar2->intf[0]->dev,
 230                        "%s(): usb_submit_urb() = %d\n", __func__, r);
 231                return r;
 232        }
 233        r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
 234        if (r) {
 235                usb_kill_urb(ar2->urb[0]);
 236                dev_err(&ar2->intf[1]->dev,
 237                        "%s(): usb_submit_urb() = %d\n", __func__, r);
 238                return r;
 239        }
 240
 241        return 0;
 242}
 243
 244static void ati_remote2_kill_urbs(struct ati_remote2 *ar2)
 245{
 246        usb_kill_urb(ar2->urb[1]);
 247        usb_kill_urb(ar2->urb[0]);
 248}
 249
 250static int ati_remote2_open(struct input_dev *idev)
 251{
 252        struct ati_remote2 *ar2 = input_get_drvdata(idev);
 253        int r;
 254
 255        dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 256
 257        r = usb_autopm_get_interface(ar2->intf[0]);
 258        if (r) {
 259                dev_err(&ar2->intf[0]->dev,
 260                        "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
 261                goto fail1;
 262        }
 263
 264        mutex_lock(&ati_remote2_mutex);
 265
 266        if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) {
 267                r = ati_remote2_submit_urbs(ar2);
 268                if (r)
 269                        goto fail2;
 270        }
 271
 272        ar2->flags |= ATI_REMOTE2_OPENED;
 273
 274        mutex_unlock(&ati_remote2_mutex);
 275
 276        usb_autopm_put_interface(ar2->intf[0]);
 277
 278        return 0;
 279
 280 fail2:
 281        mutex_unlock(&ati_remote2_mutex);
 282        usb_autopm_put_interface(ar2->intf[0]);
 283 fail1:
 284        return r;
 285}
 286
 287static void ati_remote2_close(struct input_dev *idev)
 288{
 289        struct ati_remote2 *ar2 = input_get_drvdata(idev);
 290
 291        dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 292
 293        mutex_lock(&ati_remote2_mutex);
 294
 295        if (!(ar2->flags & ATI_REMOTE2_SUSPENDED))
 296                ati_remote2_kill_urbs(ar2);
 297
 298        ar2->flags &= ~ATI_REMOTE2_OPENED;
 299
 300        mutex_unlock(&ati_remote2_mutex);
 301}
 302
 303static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
 304{
 305        struct input_dev *idev = ar2->idev;
 306        u8 *data = ar2->buf[0];
 307        int channel, mode;
 308
 309        channel = data[0] >> 4;
 310
 311        if (!((1 << channel) & ar2->channel_mask))
 312                return;
 313
 314        mode = data[0] & 0x0F;
 315
 316        if (mode > ATI_REMOTE2_PC) {
 317                dev_err(&ar2->intf[0]->dev,
 318                        "Unknown mode byte (%02x %02x %02x %02x)\n",
 319                        data[3], data[2], data[1], data[0]);
 320                return;
 321        }
 322
 323        if (!((1 << mode) & ar2->mode_mask))
 324                return;
 325
 326        input_event(idev, EV_REL, REL_X, (s8) data[1]);
 327        input_event(idev, EV_REL, REL_Y, (s8) data[2]);
 328        input_sync(idev);
 329}
 330
 331static int ati_remote2_lookup(unsigned int hw_code)
 332{
 333        int i;
 334
 335        for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++)
 336                if (ati_remote2_key_table[i].hw_code == hw_code)
 337                        return i;
 338
 339        return -1;
 340}
 341
 342static void ati_remote2_input_key(struct ati_remote2 *ar2)
 343{
 344        struct input_dev *idev = ar2->idev;
 345        u8 *data = ar2->buf[1];
 346        int channel, mode, hw_code, index;
 347
 348        channel = data[0] >> 4;
 349
 350        if (!((1 << channel) & ar2->channel_mask))
 351                return;
 352
 353        mode = data[0] & 0x0F;
 354
 355        if (mode > ATI_REMOTE2_PC) {
 356                dev_err(&ar2->intf[1]->dev,
 357                        "Unknown mode byte (%02x %02x %02x %02x)\n",
 358                        data[3], data[2], data[1], data[0]);
 359                return;
 360        }
 361
 362        hw_code = data[2];
 363        if (hw_code == 0x3f) {
 364                /*
 365                 * For some incomprehensible reason the mouse pad generates
 366                 * events which look identical to the events from the last
 367                 * pressed mode key. Naturally we don't want to generate key
 368                 * events for the mouse pad so we filter out any subsequent
 369                 * events from the same mode key.
 370                 */
 371                if (ar2->mode == mode)
 372                        return;
 373
 374                if (data[1] == 0)
 375                        ar2->mode = mode;
 376        }
 377
 378        if (!((1 << mode) & ar2->mode_mask))
 379                return;
 380
 381        index = ati_remote2_lookup(hw_code);
 382        if (index < 0) {
 383                dev_err(&ar2->intf[1]->dev,
 384                        "Unknown code byte (%02x %02x %02x %02x)\n",
 385                        data[3], data[2], data[1], data[0]);
 386                return;
 387        }
 388
 389        switch (data[1]) {
 390        case 0: /* release */
 391                break;
 392        case 1: /* press */
 393                ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
 394                break;
 395        case 2: /* repeat */
 396
 397                /* No repeat for mouse buttons. */
 398                if (ar2->keycode[mode][index] == BTN_LEFT ||
 399                    ar2->keycode[mode][index] == BTN_RIGHT)
 400                        return;
 401
 402                if (!time_after_eq(jiffies, ar2->jiffies))
 403                        return;
 404
 405                ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]);
 406                break;
 407        default:
 408                dev_err(&ar2->intf[1]->dev,
 409                        "Unknown state byte (%02x %02x %02x %02x)\n",
 410                        data[3], data[2], data[1], data[0]);
 411                return;
 412        }
 413
 414        input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]);
 415        input_sync(idev);
 416}
 417
 418static void ati_remote2_complete_mouse(struct urb *urb)
 419{
 420        struct ati_remote2 *ar2 = urb->context;
 421        int r;
 422
 423        switch (urb->status) {
 424        case 0:
 425                usb_mark_last_busy(ar2->udev);
 426                ati_remote2_input_mouse(ar2);
 427                break;
 428        case -ENOENT:
 429        case -EILSEQ:
 430        case -ECONNRESET:
 431        case -ESHUTDOWN:
 432                dev_dbg(&ar2->intf[0]->dev,
 433                        "%s(): urb status = %d\n", __func__, urb->status);
 434                return;
 435        default:
 436                usb_mark_last_busy(ar2->udev);
 437                dev_err(&ar2->intf[0]->dev,
 438                        "%s(): urb status = %d\n", __func__, urb->status);
 439        }
 440
 441        r = usb_submit_urb(urb, GFP_ATOMIC);
 442        if (r)
 443                dev_err(&ar2->intf[0]->dev,
 444                        "%s(): usb_submit_urb() = %d\n", __func__, r);
 445}
 446
 447static void ati_remote2_complete_key(struct urb *urb)
 448{
 449        struct ati_remote2 *ar2 = urb->context;
 450        int r;
 451
 452        switch (urb->status) {
 453        case 0:
 454                usb_mark_last_busy(ar2->udev);
 455                ati_remote2_input_key(ar2);
 456                break;
 457        case -ENOENT:
 458        case -EILSEQ:
 459        case -ECONNRESET:
 460        case -ESHUTDOWN:
 461                dev_dbg(&ar2->intf[1]->dev,
 462                        "%s(): urb status = %d\n", __func__, urb->status);
 463                return;
 464        default:
 465                usb_mark_last_busy(ar2->udev);
 466                dev_err(&ar2->intf[1]->dev,
 467                        "%s(): urb status = %d\n", __func__, urb->status);
 468        }
 469
 470        r = usb_submit_urb(urb, GFP_ATOMIC);
 471        if (r)
 472                dev_err(&ar2->intf[1]->dev,
 473                        "%s(): usb_submit_urb() = %d\n", __func__, r);
 474}
 475
 476static int ati_remote2_getkeycode(struct input_dev *idev,
 477                                  int scancode, int *keycode)
 478{
 479        struct ati_remote2 *ar2 = input_get_drvdata(idev);
 480        int index, mode;
 481
 482        mode = scancode >> 8;
 483        if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
 484                return -EINVAL;
 485
 486        index = ati_remote2_lookup(scancode & 0xFF);
 487        if (index < 0)
 488                return -EINVAL;
 489
 490        *keycode = ar2->keycode[mode][index];
 491        return 0;
 492}
 493
 494static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keycode)
 495{
 496        struct ati_remote2 *ar2 = input_get_drvdata(idev);
 497        int index, mode, old_keycode;
 498
 499        mode = scancode >> 8;
 500        if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
 501                return -EINVAL;
 502
 503        index = ati_remote2_lookup(scancode & 0xFF);
 504        if (index < 0)
 505                return -EINVAL;
 506
 507        if (keycode < KEY_RESERVED || keycode > KEY_MAX)
 508                return -EINVAL;
 509
 510        old_keycode = ar2->keycode[mode][index];
 511        ar2->keycode[mode][index] = keycode;
 512        __set_bit(keycode, idev->keybit);
 513
 514        for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
 515                for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
 516                        if (ar2->keycode[mode][index] == old_keycode)
 517                                return 0;
 518                }
 519        }
 520
 521        __clear_bit(old_keycode, idev->keybit);
 522
 523        return 0;
 524}
 525
 526static int ati_remote2_input_init(struct ati_remote2 *ar2)
 527{
 528        struct input_dev *idev;
 529        int index, mode, retval;
 530
 531        idev = input_allocate_device();
 532        if (!idev)
 533                return -ENOMEM;
 534
 535        ar2->idev = idev;
 536        input_set_drvdata(idev, ar2);
 537
 538        idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
 539        idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
 540                BIT_MASK(BTN_RIGHT);
 541        idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
 542
 543        for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) {
 544                for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) {
 545                        ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode;
 546                        __set_bit(ar2->keycode[mode][index], idev->keybit);
 547                }
 548        }
 549
 550        /* AUX1-AUX4 and PC generate the same scancode. */
 551        index = ati_remote2_lookup(0x3f);
 552        ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1;
 553        ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2;
 554        ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3;
 555        ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4;
 556        ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC;
 557        __set_bit(KEY_PROG1, idev->keybit);
 558        __set_bit(KEY_PROG2, idev->keybit);
 559        __set_bit(KEY_PROG3, idev->keybit);
 560        __set_bit(KEY_PROG4, idev->keybit);
 561        __set_bit(KEY_PC, idev->keybit);
 562
 563        idev->rep[REP_DELAY]  = 250;
 564        idev->rep[REP_PERIOD] = 33;
 565
 566        idev->open = ati_remote2_open;
 567        idev->close = ati_remote2_close;
 568
 569        idev->getkeycode = ati_remote2_getkeycode;
 570        idev->setkeycode = ati_remote2_setkeycode;
 571
 572        idev->name = ar2->name;
 573        idev->phys = ar2->phys;
 574
 575        usb_to_input_id(ar2->udev, &idev->id);
 576        idev->dev.parent = &ar2->udev->dev;
 577
 578        retval = input_register_device(idev);
 579        if (retval)
 580                input_free_device(idev);
 581
 582        return retval;
 583}
 584
 585static int ati_remote2_urb_init(struct ati_remote2 *ar2)
 586{
 587        struct usb_device *udev = ar2->udev;
 588        int i, pipe, maxp;
 589
 590        for (i = 0; i < 2; i++) {
 591                ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]);
 592                if (!ar2->buf[i])
 593                        return -ENOMEM;
 594
 595                ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
 596                if (!ar2->urb[i])
 597                        return -ENOMEM;
 598
 599                pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
 600                maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 601                maxp = maxp > 4 ? 4 : maxp;
 602
 603                usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
 604                                 i ? ati_remote2_complete_key : ati_remote2_complete_mouse,
 605                                 ar2, ar2->ep[i]->bInterval);
 606                ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
 607                ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 608        }
 609
 610        return 0;
 611}
 612
 613static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
 614{
 615        int i;
 616
 617        for (i = 0; i < 2; i++) {
 618                usb_free_urb(ar2->urb[i]);
 619                usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
 620        }
 621}
 622
 623static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
 624{
 625        int r, i, channel;
 626
 627        /*
 628         * Configure receiver to only accept input from remote "channel"
 629         *  channel == 0  -> Accept input from any remote channel
 630         *  channel == 1  -> Only accept input from remote channel 1
 631         *  channel == 2  -> Only accept input from remote channel 2
 632         *  ...
 633         *  channel == 16 -> Only accept input from remote channel 16
 634         */
 635
 636        channel = 0;
 637        for (i = 0; i < 16; i++) {
 638                if ((1 << i) & ch_mask) {
 639                        if (!(~(1 << i) & ch_mask))
 640                                channel = i + 1;
 641                        break;
 642                }
 643        }
 644
 645        r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
 646                            0x20,
 647                            USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
 648                            channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 649        if (r) {
 650                dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
 651                        __func__, r);
 652                return r;
 653        }
 654
 655        return 0;
 656}
 657
 658static ssize_t ati_remote2_show_channel_mask(struct device *dev,
 659                                             struct device_attribute *attr,
 660                                             char *buf)
 661{
 662        struct usb_device *udev = to_usb_device(dev);
 663        struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
 664        struct ati_remote2 *ar2 = usb_get_intfdata(intf);
 665
 666        return sprintf(buf, "0x%04x\n", ar2->channel_mask);
 667}
 668
 669static ssize_t ati_remote2_store_channel_mask(struct device *dev,
 670                                              struct device_attribute *attr,
 671                                              const char *buf, size_t count)
 672{
 673        struct usb_device *udev = to_usb_device(dev);
 674        struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
 675        struct ati_remote2 *ar2 = usb_get_intfdata(intf);
 676        unsigned long mask;
 677        int r;
 678
 679        if (strict_strtoul(buf, 0, &mask))
 680                return -EINVAL;
 681
 682        if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
 683                return -EINVAL;
 684
 685        r = usb_autopm_get_interface(ar2->intf[0]);
 686        if (r) {
 687                dev_err(&ar2->intf[0]->dev,
 688                        "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
 689                return r;
 690        }
 691
 692        mutex_lock(&ati_remote2_mutex);
 693
 694        if (mask != ar2->channel_mask && !ati_remote2_setup(ar2, mask))
 695                ar2->channel_mask = mask;
 696
 697        mutex_unlock(&ati_remote2_mutex);
 698
 699        usb_autopm_put_interface(ar2->intf[0]);
 700
 701        return count;
 702}
 703
 704static ssize_t ati_remote2_show_mode_mask(struct device *dev,
 705                                          struct device_attribute *attr,
 706                                          char *buf)
 707{
 708        struct usb_device *udev = to_usb_device(dev);
 709        struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
 710        struct ati_remote2 *ar2 = usb_get_intfdata(intf);
 711
 712        return sprintf(buf, "0x%02x\n", ar2->mode_mask);
 713}
 714
 715static ssize_t ati_remote2_store_mode_mask(struct device *dev,
 716                                           struct device_attribute *attr,
 717                                           const char *buf, size_t count)
 718{
 719        struct usb_device *udev = to_usb_device(dev);
 720        struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
 721        struct ati_remote2 *ar2 = usb_get_intfdata(intf);
 722        unsigned long mask;
 723
 724        if (strict_strtoul(buf, 0, &mask))
 725                return -EINVAL;
 726
 727        if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
 728                return -EINVAL;
 729
 730        ar2->mode_mask = mask;
 731
 732        return count;
 733}
 734
 735static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
 736                   ati_remote2_store_channel_mask);
 737
 738static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
 739                   ati_remote2_store_mode_mask);
 740
 741static struct attribute *ati_remote2_attrs[] = {
 742        &dev_attr_channel_mask.attr,
 743        &dev_attr_mode_mask.attr,
 744        NULL,
 745};
 746
 747static struct attribute_group ati_remote2_attr_group = {
 748        .attrs = ati_remote2_attrs,
 749};
 750
 751static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
 752{
 753        struct usb_device *udev = interface_to_usbdev(interface);
 754        struct usb_host_interface *alt = interface->cur_altsetting;
 755        struct ati_remote2 *ar2;
 756        int r;
 757
 758        if (alt->desc.bInterfaceNumber)
 759                return -ENODEV;
 760
 761        ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
 762        if (!ar2)
 763                return -ENOMEM;
 764
 765        ar2->udev = udev;
 766
 767        ar2->intf[0] = interface;
 768        ar2->ep[0] = &alt->endpoint[0].desc;
 769
 770        ar2->intf[1] = usb_ifnum_to_if(udev, 1);
 771        r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
 772        if (r)
 773                goto fail1;
 774        alt = ar2->intf[1]->cur_altsetting;
 775        ar2->ep[1] = &alt->endpoint[0].desc;
 776
 777        r = ati_remote2_urb_init(ar2);
 778        if (r)
 779                goto fail2;
 780
 781        ar2->channel_mask = channel_mask;
 782        ar2->mode_mask = mode_mask;
 783
 784        r = ati_remote2_setup(ar2, ar2->channel_mask);
 785        if (r)
 786                goto fail2;
 787
 788        usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
 789        strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
 790
 791        strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
 792
 793        r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
 794        if (r)
 795                goto fail2;
 796
 797        r = ati_remote2_input_init(ar2);
 798        if (r)
 799                goto fail3;
 800
 801        usb_set_intfdata(interface, ar2);
 802
 803        interface->needs_remote_wakeup = 1;
 804
 805        return 0;
 806
 807 fail3:
 808        sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
 809 fail2:
 810        ati_remote2_urb_cleanup(ar2);
 811        usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
 812 fail1:
 813        kfree(ar2);
 814
 815        return r;
 816}
 817
 818static void ati_remote2_disconnect(struct usb_interface *interface)
 819{
 820        struct ati_remote2 *ar2;
 821        struct usb_host_interface *alt = interface->cur_altsetting;
 822
 823        if (alt->desc.bInterfaceNumber)
 824                return;
 825
 826        ar2 = usb_get_intfdata(interface);
 827        usb_set_intfdata(interface, NULL);
 828
 829        input_unregister_device(ar2->idev);
 830
 831        sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
 832
 833        ati_remote2_urb_cleanup(ar2);
 834
 835        usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
 836
 837        kfree(ar2);
 838}
 839
 840static int ati_remote2_suspend(struct usb_interface *interface,
 841                               pm_message_t message)
 842{
 843        struct ati_remote2 *ar2;
 844        struct usb_host_interface *alt = interface->cur_altsetting;
 845
 846        if (alt->desc.bInterfaceNumber)
 847                return 0;
 848
 849        ar2 = usb_get_intfdata(interface);
 850
 851        dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 852
 853        mutex_lock(&ati_remote2_mutex);
 854
 855        if (ar2->flags & ATI_REMOTE2_OPENED)
 856                ati_remote2_kill_urbs(ar2);
 857
 858        ar2->flags |= ATI_REMOTE2_SUSPENDED;
 859
 860        mutex_unlock(&ati_remote2_mutex);
 861
 862        return 0;
 863}
 864
 865static int ati_remote2_resume(struct usb_interface *interface)
 866{
 867        struct ati_remote2 *ar2;
 868        struct usb_host_interface *alt = interface->cur_altsetting;
 869        int r = 0;
 870
 871        if (alt->desc.bInterfaceNumber)
 872                return 0;
 873
 874        ar2 = usb_get_intfdata(interface);
 875
 876        dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 877
 878        mutex_lock(&ati_remote2_mutex);
 879
 880        if (ar2->flags & ATI_REMOTE2_OPENED)
 881                r = ati_remote2_submit_urbs(ar2);
 882
 883        if (!r)
 884                ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
 885
 886        mutex_unlock(&ati_remote2_mutex);
 887
 888        return r;
 889}
 890
 891static int ati_remote2_reset_resume(struct usb_interface *interface)
 892{
 893        struct ati_remote2 *ar2;
 894        struct usb_host_interface *alt = interface->cur_altsetting;
 895        int r = 0;
 896
 897        if (alt->desc.bInterfaceNumber)
 898                return 0;
 899
 900        ar2 = usb_get_intfdata(interface);
 901
 902        dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 903
 904        mutex_lock(&ati_remote2_mutex);
 905
 906        r = ati_remote2_setup(ar2, ar2->channel_mask);
 907        if (r)
 908                goto out;
 909
 910        if (ar2->flags & ATI_REMOTE2_OPENED)
 911                r = ati_remote2_submit_urbs(ar2);
 912
 913        if (!r)
 914                ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
 915
 916 out:
 917        mutex_unlock(&ati_remote2_mutex);
 918
 919        return r;
 920}
 921
 922static int ati_remote2_pre_reset(struct usb_interface *interface)
 923{
 924        struct ati_remote2 *ar2;
 925        struct usb_host_interface *alt = interface->cur_altsetting;
 926
 927        if (alt->desc.bInterfaceNumber)
 928                return 0;
 929
 930        ar2 = usb_get_intfdata(interface);
 931
 932        dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 933
 934        mutex_lock(&ati_remote2_mutex);
 935
 936        if (ar2->flags == ATI_REMOTE2_OPENED)
 937                ati_remote2_kill_urbs(ar2);
 938
 939        return 0;
 940}
 941
 942static int ati_remote2_post_reset(struct usb_interface *interface)
 943{
 944        struct ati_remote2 *ar2;
 945        struct usb_host_interface *alt = interface->cur_altsetting;
 946        int r = 0;
 947
 948        if (alt->desc.bInterfaceNumber)
 949                return 0;
 950
 951        ar2 = usb_get_intfdata(interface);
 952
 953        dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
 954
 955        if (ar2->flags == ATI_REMOTE2_OPENED)
 956                r = ati_remote2_submit_urbs(ar2);
 957
 958        mutex_unlock(&ati_remote2_mutex);
 959
 960        return r;
 961}
 962
 963static int __init ati_remote2_init(void)
 964{
 965        int r;
 966
 967        r = usb_register(&ati_remote2_driver);
 968        if (r)
 969                printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
 970        else
 971                printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION "\n");
 972
 973        return r;
 974}
 975
 976static void __exit ati_remote2_exit(void)
 977{
 978        usb_deregister(&ati_remote2_driver);
 979}
 980
 981module_init(ati_remote2_init);
 982module_exit(ati_remote2_exit);
 983