linux/drivers/isdn/hardware/eicon/os_bri.c
<<
>>
Prefs
   1/* $Id: os_bri.c,v 1.21 2004/03/21 17:26:01 armin Exp $ */
   2
   3#include "platform.h"
   4#include "debuglib.h"
   5#include "cardtype.h"
   6#include "pc.h"
   7#include "pr_pc.h"
   8#include "di_defs.h"
   9#include "dsp_defs.h"
  10#include "di.h"
  11#include "io.h"
  12
  13#include "xdi_msg.h"
  14#include "xdi_adapter.h"
  15#include "os_bri.h"
  16#include "diva_pci.h"
  17#include "mi_pc.h"
  18#include "pc_maint.h"
  19#include "dsrv_bri.h"
  20
  21/*
  22**  IMPORTS
  23*/
  24extern void prepare_maestra_functions(PISDN_ADAPTER IoAdapter);
  25extern void diva_xdi_display_adapter_features(int card);
  26extern int diva_card_read_xlog(diva_os_xdi_adapter_t * a);
  27
  28/*
  29**  LOCALS
  30*/
  31static int bri_bar_length[3] = {
  32        0x80,
  33        0x80,
  34        0x20
  35};
  36static int diva_bri_cleanup_adapter(diva_os_xdi_adapter_t * a);
  37static dword diva_bri_get_serial_number(diva_os_xdi_adapter_t * a);
  38static int diva_bri_cmd_card_proc(struct _diva_os_xdi_adapter *a,
  39                                  diva_xdi_um_cfg_cmd_t * cmd, int length);
  40static int diva_bri_reregister_io(diva_os_xdi_adapter_t * a);
  41static int diva_bri_reset_adapter(PISDN_ADAPTER IoAdapter);
  42static int diva_bri_write_sdram_block(PISDN_ADAPTER IoAdapter,
  43                                      dword address,
  44                                      const byte * data, dword length);
  45static int diva_bri_start_adapter(PISDN_ADAPTER IoAdapter,
  46                                  dword start_address, dword features);
  47static int diva_bri_stop_adapter(diva_os_xdi_adapter_t * a);
  48
  49static void diva_bri_set_addresses(diva_os_xdi_adapter_t * a)
  50{
  51        a->resources.pci.mem_type_id[MEM_TYPE_RAM] = 0;
  52        a->resources.pci.mem_type_id[MEM_TYPE_CFG] = 1;
  53        a->resources.pci.mem_type_id[MEM_TYPE_ADDRESS] = 2;
  54        a->resources.pci.mem_type_id[MEM_TYPE_RESET] = 1;
  55        a->resources.pci.mem_type_id[MEM_TYPE_PORT] = 2;
  56        a->resources.pci.mem_type_id[MEM_TYPE_CTLREG] = 2;
  57        
  58        a->xdi_adapter.ram = a->resources.pci.addr[0];
  59        a->xdi_adapter.cfg = a->resources.pci.addr[1];
  60        a->xdi_adapter.Address = a->resources.pci.addr[2];
  61
  62        a->xdi_adapter.reset = a->xdi_adapter.cfg;
  63        a->xdi_adapter.port = a->xdi_adapter.Address;
  64
  65        a->xdi_adapter.ctlReg = a->xdi_adapter.port + M_PCI_RESET;
  66
  67        a->xdi_adapter.reset += 0x4C;   /* PLX 9050 !! */
  68}
  69
  70/*
  71**  BAR0 - MEM Addr  - 0x80  - NOT USED
  72**  BAR1 - I/O Addr  - 0x80
  73**  BAR2 - I/O Addr  - 0x20
  74*/
  75int diva_bri_init_card(diva_os_xdi_adapter_t * a)
  76{
  77        int bar;
  78        dword bar2 = 0, bar2_length = 0xffffffff;
  79        word cmd = 0, cmd_org;
  80        byte Bus, Slot;
  81        void *hdev;
  82        byte __iomem *p;
  83
  84        /*
  85           Set properties
  86         */
  87        a->xdi_adapter.Properties = CardProperties[a->CardOrdinal];
  88        DBG_LOG(("Load %s", a->xdi_adapter.Properties.Name))
  89
  90            /*
  91               Get resources
  92             */
  93            for (bar = 0; bar < 3; bar++) {
  94                a->resources.pci.bar[bar] =
  95                    divasa_get_pci_bar(a->resources.pci.bus,
  96                                       a->resources.pci.func, bar,
  97                                       a->resources.pci.hdev);
  98                if (!a->resources.pci.bar[bar]) {
  99                        DBG_ERR(("A: can't get BAR[%d]", bar))
 100                        return (-1);
 101                }
 102        }
 103
 104        a->resources.pci.irq =
 105            (byte) divasa_get_pci_irq(a->resources.pci.bus,
 106                                      a->resources.pci.func,
 107                                      a->resources.pci.hdev);
 108        if (!a->resources.pci.irq) {
 109                DBG_ERR(("A: invalid irq"));
 110                return (-1);
 111        }
 112
 113        /*
 114           Get length of I/O bar 2 - it is different by older
 115           EEPROM version
 116         */
 117        Bus = a->resources.pci.bus;
 118        Slot = a->resources.pci.func;
 119        hdev = a->resources.pci.hdev;
 120
 121        /*
 122           Get plain original values of the BAR2 CDM registers
 123         */
 124        PCIread(Bus, Slot, 0x18, &bar2, sizeof(bar2), hdev);
 125        PCIread(Bus, Slot, 0x04, &cmd_org, sizeof(cmd_org), hdev);
 126        /*
 127           Disable device and get BAR2 length
 128         */
 129        PCIwrite(Bus, Slot, 0x04, &cmd, sizeof(cmd), hdev);
 130        PCIwrite(Bus, Slot, 0x18, &bar2_length, sizeof(bar2_length), hdev);
 131        PCIread(Bus, Slot, 0x18, &bar2_length, sizeof(bar2_length), hdev);
 132        /*
 133           Restore BAR2 and CMD registers
 134         */
 135        PCIwrite(Bus, Slot, 0x18, &bar2, sizeof(bar2), hdev);
 136        PCIwrite(Bus, Slot, 0x04, &cmd_org, sizeof(cmd_org), hdev);
 137
 138        /*
 139           Calculate BAR2 length
 140         */
 141        bar2_length = (~(bar2_length & ~7)) + 1;
 142        DBG_LOG(("BAR[2] length=%lx", bar2_length))
 143
 144            /*
 145               Map and register resources
 146             */
 147            if (!(a->resources.pci.addr[0] =
 148                 divasa_remap_pci_bar(a, 0, a->resources.pci.bar[0],
 149                                      bri_bar_length[0]))) {
 150                DBG_ERR(("A: BRI, can't map BAR[0]"))
 151                diva_bri_cleanup_adapter(a);
 152                return (-1);
 153        }
 154
 155        sprintf(&a->port_name[0], "BRI %02x:%02x",
 156                a->resources.pci.bus, a->resources.pci.func);
 157
 158        if (diva_os_register_io_port(a, 1, a->resources.pci.bar[1],
 159                                     bri_bar_length[1], &a->port_name[0], 1)) {
 160                DBG_ERR(("A: BRI, can't register BAR[1]"))
 161                diva_bri_cleanup_adapter(a);
 162                return (-1);
 163        }
 164        a->resources.pci.addr[1] = (void *) (unsigned long) a->resources.pci.bar[1];
 165        a->resources.pci.length[1] = bri_bar_length[1];
 166
 167        if (diva_os_register_io_port(a, 1, a->resources.pci.bar[2],
 168                                     bar2_length, &a->port_name[0], 2)) {
 169                DBG_ERR(("A: BRI, can't register BAR[2]"))
 170                diva_bri_cleanup_adapter(a);
 171                return (-1);
 172        }
 173        a->resources.pci.addr[2] = (void *) (unsigned long) a->resources.pci.bar[2];
 174        a->resources.pci.length[2] = bar2_length;
 175
 176        /*
 177           Set all memory areas
 178         */
 179        diva_bri_set_addresses(a);
 180
 181        /*
 182           Get Serial Number
 183         */
 184        a->xdi_adapter.serialNo = diva_bri_get_serial_number(a);
 185
 186        /*
 187           Register I/O ports with correct name now
 188         */
 189        if (diva_bri_reregister_io(a)) {
 190                diva_bri_cleanup_adapter(a);
 191                return (-1);
 192        }
 193
 194        /*
 195           Initialize OS dependent objects
 196         */
 197        if (diva_os_initialize_spin_lock
 198            (&a->xdi_adapter.isr_spin_lock, "isr")) {
 199                diva_bri_cleanup_adapter(a);
 200                return (-1);
 201        }
 202        if (diva_os_initialize_spin_lock
 203            (&a->xdi_adapter.data_spin_lock, "data")) {
 204                diva_bri_cleanup_adapter(a);
 205                return (-1);
 206        }
 207
 208        strcpy(a->xdi_adapter.req_soft_isr.dpc_thread_name, "kdivasbrid");
 209
 210        if (diva_os_initialize_soft_isr(&a->xdi_adapter.req_soft_isr,
 211                                        DIDpcRoutine, &a->xdi_adapter)) {
 212                diva_bri_cleanup_adapter(a);
 213                return (-1);
 214        }
 215        /*
 216           Do not initialize second DPC - only one thread will be created
 217         */
 218        a->xdi_adapter.isr_soft_isr.object = a->xdi_adapter.req_soft_isr.object;
 219
 220        /*
 221           Create entity table
 222         */
 223        a->xdi_adapter.Channels = CardProperties[a->CardOrdinal].Channels;
 224        a->xdi_adapter.e_max = CardProperties[a->CardOrdinal].E_info;
 225        a->xdi_adapter.e_tbl = diva_os_malloc(0, a->xdi_adapter.e_max * sizeof(E_INFO));
 226        if (!a->xdi_adapter.e_tbl) {
 227                diva_bri_cleanup_adapter(a);
 228                return (-1);
 229        }
 230        memset(a->xdi_adapter.e_tbl, 0x00, a->xdi_adapter.e_max * sizeof(E_INFO));
 231
 232        /*
 233           Set up interface
 234         */
 235        a->xdi_adapter.a.io = &a->xdi_adapter;
 236        a->xdi_adapter.DIRequest = request;
 237        a->interface.cleanup_adapter_proc = diva_bri_cleanup_adapter;
 238        a->interface.cmd_proc = diva_bri_cmd_card_proc;
 239
 240        p = DIVA_OS_MEM_ATTACH_RESET(&a->xdi_adapter);
 241        outpp(p, 0x41);
 242        DIVA_OS_MEM_DETACH_RESET(&a->xdi_adapter, p);
 243
 244        prepare_maestra_functions(&a->xdi_adapter);
 245
 246        a->dsp_mask = 0x00000003;
 247
 248        /*
 249           Set IRQ handler
 250         */
 251        a->xdi_adapter.irq_info.irq_nr = a->resources.pci.irq;
 252        sprintf(a->xdi_adapter.irq_info.irq_name, "DIVA BRI %ld",
 253                (long) a->xdi_adapter.serialNo);
 254        if (diva_os_register_irq(a, a->xdi_adapter.irq_info.irq_nr,
 255                                 a->xdi_adapter.irq_info.irq_name)) {
 256                diva_bri_cleanup_adapter(a);
 257                return (-1);
 258        }
 259        a->xdi_adapter.irq_info.registered = 1;
 260
 261        diva_log_info("%s IRQ:%d SerNo:%d", a->xdi_adapter.Properties.Name,
 262                      a->resources.pci.irq, a->xdi_adapter.serialNo);
 263
 264        return (0);
 265}
 266
 267
 268static int diva_bri_cleanup_adapter(diva_os_xdi_adapter_t * a)
 269{
 270        int i;
 271
 272        if (a->xdi_adapter.Initialized) {
 273                diva_bri_stop_adapter(a);
 274        }
 275
 276        /*
 277           Remove ISR Handler
 278         */
 279        if (a->xdi_adapter.irq_info.registered) {
 280                diva_os_remove_irq(a, a->xdi_adapter.irq_info.irq_nr);
 281        }
 282        a->xdi_adapter.irq_info.registered = 0;
 283
 284        if (a->resources.pci.addr[0] && a->resources.pci.bar[0]) {
 285                divasa_unmap_pci_bar(a->resources.pci.addr[0]);
 286                a->resources.pci.addr[0] = NULL;
 287                a->resources.pci.bar[0] = 0;
 288        }
 289
 290        for (i = 1; i < 3; i++) {
 291                if (a->resources.pci.addr[i] && a->resources.pci.bar[i]) {
 292                        diva_os_register_io_port(a, 0,
 293                                                 a->resources.pci.bar[i],
 294                                                 a->resources.pci.
 295                                                 length[i],
 296                                                 &a->port_name[0], i);
 297                        a->resources.pci.addr[i] = NULL;
 298                        a->resources.pci.bar[i] = 0;
 299                }
 300        }
 301
 302        /*
 303           Free OS objects
 304         */
 305        diva_os_cancel_soft_isr(&a->xdi_adapter.req_soft_isr);
 306        diva_os_cancel_soft_isr(&a->xdi_adapter.isr_soft_isr);
 307
 308        diva_os_remove_soft_isr(&a->xdi_adapter.req_soft_isr);
 309        a->xdi_adapter.isr_soft_isr.object = NULL;
 310
 311        diva_os_destroy_spin_lock(&a->xdi_adapter.isr_spin_lock, "rm");
 312        diva_os_destroy_spin_lock(&a->xdi_adapter.data_spin_lock, "rm");
 313
 314        /*
 315           Free memory
 316         */
 317        if (a->xdi_adapter.e_tbl) {
 318                diva_os_free(0, a->xdi_adapter.e_tbl);
 319                a->xdi_adapter.e_tbl = NULL;
 320        }
 321
 322        return (0);
 323}
 324
 325void diva_os_prepare_maestra_functions(PISDN_ADAPTER IoAdapter)
 326{
 327}
 328
 329/*
 330**  Get serial number
 331*/
 332static dword diva_bri_get_serial_number(diva_os_xdi_adapter_t * a)
 333{
 334        dword serNo = 0;
 335        byte __iomem *confIO;
 336        word serHi, serLo;
 337        word __iomem *confMem;
 338
 339        confIO = DIVA_OS_MEM_ATTACH_CFG(&a->xdi_adapter);
 340        serHi = (word) (inppw(&confIO[0x22]) & 0x0FFF);
 341        serLo = (word) (inppw(&confIO[0x26]) & 0x0FFF);
 342        serNo = ((dword) serHi << 16) | (dword) serLo;
 343        DIVA_OS_MEM_DETACH_CFG(&a->xdi_adapter, confIO);
 344
 345        if ((serNo == 0) || (serNo == 0xFFFFFFFF)) {
 346                DBG_FTL(("W: BRI use BAR[0] to get card serial number"))
 347
 348                confMem = (word __iomem *)DIVA_OS_MEM_ATTACH_RAM(&a->xdi_adapter);
 349                serHi = (word) (READ_WORD(&confMem[0x11]) & 0x0FFF);
 350                serLo = (word) (READ_WORD(&confMem[0x13]) & 0x0FFF);
 351                serNo = (((dword) serHi) << 16) | ((dword) serLo);
 352                DIVA_OS_MEM_DETACH_RAM(&a->xdi_adapter, confMem);
 353        }
 354
 355        DBG_LOG(("Serial Number=%ld", serNo))
 356
 357        return (serNo);
 358}
 359
 360/*
 361**  Unregister I/O and register it with new name,
 362**  based on Serial Number
 363*/
 364static int diva_bri_reregister_io(diva_os_xdi_adapter_t * a)
 365{
 366        int i;
 367
 368        for (i = 1; i < 3; i++) {
 369                diva_os_register_io_port(a, 0, a->resources.pci.bar[i],
 370                                         a->resources.pci.length[i],
 371                                         &a->port_name[0], i);
 372                a->resources.pci.addr[i] = NULL;
 373        }
 374
 375        sprintf(a->port_name, "DIVA BRI %ld",
 376                (long) a->xdi_adapter.serialNo);
 377
 378        for (i = 1; i < 3; i++) {
 379                if (diva_os_register_io_port(a, 1, a->resources.pci.bar[i],
 380                                             a->resources.pci.length[i],
 381                                             &a->port_name[0], i)) {
 382                        DBG_ERR(("A: failed to reregister BAR[%d]", i))
 383                        return (-1);
 384                }
 385                a->resources.pci.addr[i] =
 386                    (void *) (unsigned long) a->resources.pci.bar[i];
 387        }
 388
 389        return (0);
 390}
 391
 392/*
 393**  Process command from user mode
 394*/
 395static int
 396diva_bri_cmd_card_proc(struct _diva_os_xdi_adapter *a,
 397                       diva_xdi_um_cfg_cmd_t * cmd, int length)
 398{
 399        int ret = -1;
 400
 401        if (cmd->adapter != a->controller) {
 402                DBG_ERR(("A: pri_cmd, invalid controller=%d != %d",
 403                         cmd->adapter, a->controller))
 404                return (-1);
 405        }
 406
 407        switch (cmd->command) {
 408        case DIVA_XDI_UM_CMD_GET_CARD_ORDINAL:
 409                a->xdi_mbox.data_length = sizeof(dword);
 410                a->xdi_mbox.data =
 411                    diva_os_malloc(0, a->xdi_mbox.data_length);
 412                if (a->xdi_mbox.data) {
 413                        *(dword *) a->xdi_mbox.data =
 414                            (dword) a->CardOrdinal;
 415                        a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
 416                        ret = 0;
 417                }
 418                break;
 419
 420        case DIVA_XDI_UM_CMD_GET_SERIAL_NR:
 421                a->xdi_mbox.data_length = sizeof(dword);
 422                a->xdi_mbox.data =
 423                    diva_os_malloc(0, a->xdi_mbox.data_length);
 424                if (a->xdi_mbox.data) {
 425                        *(dword *) a->xdi_mbox.data =
 426                            (dword) a->xdi_adapter.serialNo;
 427                        a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
 428                        ret = 0;
 429                }
 430                break;
 431
 432        case DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG:
 433                a->xdi_mbox.data_length = sizeof(dword) * 9;
 434                a->xdi_mbox.data =
 435                    diva_os_malloc(0, a->xdi_mbox.data_length);
 436                if (a->xdi_mbox.data) {
 437                        int i;
 438                        dword *data = (dword *) a->xdi_mbox.data;
 439
 440                        for (i = 0; i < 8; i++) {
 441                                *data++ = a->resources.pci.bar[i];
 442                        }
 443                        *data++ = (dword) a->resources.pci.irq;
 444                        a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
 445                        ret = 0;
 446                }
 447                break;
 448
 449        case DIVA_XDI_UM_CMD_GET_CARD_STATE:
 450                a->xdi_mbox.data_length = sizeof(dword);
 451                a->xdi_mbox.data =
 452                    diva_os_malloc(0, a->xdi_mbox.data_length);
 453                if (a->xdi_mbox.data) {
 454                        dword *data = (dword *) a->xdi_mbox.data;
 455                        if (!a->xdi_adapter.port) {
 456                                *data = 3;
 457                        } else if (a->xdi_adapter.trapped) {
 458                                *data = 2;
 459                        } else if (a->xdi_adapter.Initialized) {
 460                                *data = 1;
 461                        } else {
 462                                *data = 0;
 463                        }
 464                        a->xdi_mbox.status = DIVA_XDI_MBOX_BUSY;
 465                        ret = 0;
 466                }
 467                break;
 468
 469        case DIVA_XDI_UM_CMD_RESET_ADAPTER:
 470                ret = diva_bri_reset_adapter(&a->xdi_adapter);
 471                break;
 472
 473        case DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK:
 474                ret = diva_bri_write_sdram_block(&a->xdi_adapter,
 475                                                 cmd->command_data.
 476                                                 write_sdram.offset,
 477                                                 (byte *) & cmd[1],
 478                                                 cmd->command_data.
 479                                                 write_sdram.length);
 480                break;
 481
 482        case DIVA_XDI_UM_CMD_START_ADAPTER:
 483                ret = diva_bri_start_adapter(&a->xdi_adapter,
 484                                             cmd->command_data.start.
 485                                             offset,
 486                                             cmd->command_data.start.
 487                                             features);
 488                break;
 489
 490        case DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES:
 491                a->xdi_adapter.features =
 492                    cmd->command_data.features.features;
 493                a->xdi_adapter.a.protocol_capabilities =
 494                    a->xdi_adapter.features;
 495                DBG_TRC(
 496                        ("Set raw protocol features (%08x)",
 497                         a->xdi_adapter.features)) ret = 0;
 498                break;
 499
 500        case DIVA_XDI_UM_CMD_STOP_ADAPTER:
 501                ret = diva_bri_stop_adapter(a);
 502                break;
 503
 504        case DIVA_XDI_UM_CMD_READ_XLOG_ENTRY:
 505                ret = diva_card_read_xlog(a);
 506                break;
 507
 508        default:
 509                DBG_ERR(
 510                        ("A: A(%d) invalid cmd=%d", a->controller,
 511                         cmd->command))}
 512
 513        return (ret);
 514}
 515
 516static int diva_bri_reset_adapter(PISDN_ADAPTER IoAdapter)
 517{
 518        byte __iomem *addrHi, *addrLo, *ioaddr;
 519        dword i;
 520        byte __iomem *Port;
 521
 522        if (!IoAdapter->port) {
 523                return (-1);
 524        }
 525        if (IoAdapter->Initialized) {
 526                DBG_ERR(("A: A(%d) can't reset BRI adapter - please stop first",
 527                         IoAdapter->ANum)) return (-1);
 528        }
 529        (*(IoAdapter->rstFnc)) (IoAdapter);
 530        diva_os_wait(100);
 531        Port = DIVA_OS_MEM_ATTACH_PORT(IoAdapter);
 532        addrHi = Port +
 533            ((IoAdapter->Properties.Bus == BUS_PCI) ? M_PCI_ADDRH : ADDRH);
 534        addrLo = Port + ADDR;
 535        ioaddr = Port + DATA;
 536        /*
 537           recover
 538         */
 539        outpp(addrHi, (byte) 0);
 540        outppw(addrLo, (word) 0);
 541        outppw(ioaddr, (word) 0);
 542        /*
 543           clear shared memory
 544         */
 545        outpp(addrHi,
 546              (byte) (
 547                      (IoAdapter->MemoryBase + IoAdapter->MemorySize -
 548                       BRI_SHARED_RAM_SIZE) >> 16));
 549        outppw(addrLo, 0);
 550        for (i = 0; i < 0x8000; outppw(ioaddr, 0), ++i);
 551        diva_os_wait(100);
 552
 553        /*
 554           clear signature
 555         */
 556        outpp(addrHi,
 557              (byte) (
 558                      (IoAdapter->MemoryBase + IoAdapter->MemorySize -
 559                       BRI_SHARED_RAM_SIZE) >> 16));
 560        outppw(addrLo, 0x1e);
 561        outpp(ioaddr, 0);
 562        outpp(ioaddr, 0);
 563
 564        outpp(addrHi, (byte) 0);
 565        outppw(addrLo, (word) 0);
 566        outppw(ioaddr, (word) 0);
 567
 568        DIVA_OS_MEM_DETACH_PORT(IoAdapter, Port);
 569
 570        /*
 571           Forget all outstanding entities
 572         */
 573        IoAdapter->e_count = 0;
 574        if (IoAdapter->e_tbl) {
 575                memset(IoAdapter->e_tbl, 0x00,
 576                       IoAdapter->e_max * sizeof(E_INFO));
 577        }
 578        IoAdapter->head = 0;
 579        IoAdapter->tail = 0;
 580        IoAdapter->assign = 0;
 581        IoAdapter->trapped = 0;
 582
 583        memset(&IoAdapter->a.IdTable[0], 0x00,
 584               sizeof(IoAdapter->a.IdTable));
 585        memset(&IoAdapter->a.IdTypeTable[0], 0x00,
 586               sizeof(IoAdapter->a.IdTypeTable));
 587        memset(&IoAdapter->a.FlowControlIdTable[0], 0x00,
 588               sizeof(IoAdapter->a.FlowControlIdTable));
 589        memset(&IoAdapter->a.FlowControlSkipTable[0], 0x00,
 590               sizeof(IoAdapter->a.FlowControlSkipTable));
 591        memset(&IoAdapter->a.misc_flags_table[0], 0x00,
 592               sizeof(IoAdapter->a.misc_flags_table));
 593        memset(&IoAdapter->a.rx_stream[0], 0x00,
 594               sizeof(IoAdapter->a.rx_stream));
 595        memset(&IoAdapter->a.tx_stream[0], 0x00,
 596               sizeof(IoAdapter->a.tx_stream));
 597        memset(&IoAdapter->a.tx_pos[0], 0x00, sizeof(IoAdapter->a.tx_pos));
 598        memset(&IoAdapter->a.rx_pos[0], 0x00, sizeof(IoAdapter->a.rx_pos));
 599
 600        return (0);
 601}
 602
 603static int
 604diva_bri_write_sdram_block(PISDN_ADAPTER IoAdapter,
 605                           dword address, const byte * data, dword length)
 606{
 607        byte __iomem *addrHi, *addrLo, *ioaddr;
 608        byte __iomem *Port;
 609
 610        if (!IoAdapter->port) {
 611                return (-1);
 612        }
 613
 614        Port = DIVA_OS_MEM_ATTACH_PORT(IoAdapter);
 615        addrHi = Port +
 616            ((IoAdapter->Properties.Bus == BUS_PCI) ? M_PCI_ADDRH : ADDRH);
 617        addrLo = Port + ADDR;
 618        ioaddr = Port + DATA;
 619
 620        while (length--) {
 621                outpp(addrHi, (word) (address >> 16));
 622                outppw(addrLo, (word) (address & 0x0000ffff));
 623                outpp(ioaddr, *data++);
 624                address++;
 625        }
 626
 627        DIVA_OS_MEM_DETACH_PORT(IoAdapter, Port);
 628        return (0);
 629}
 630
 631static int
 632diva_bri_start_adapter(PISDN_ADAPTER IoAdapter,
 633                       dword start_address, dword features)
 634{
 635        byte __iomem *Port;
 636        dword i, test;
 637        byte __iomem *addrHi, *addrLo, *ioaddr;
 638        int started = 0;
 639        ADAPTER *a = &IoAdapter->a;
 640
 641        if (IoAdapter->Initialized) {
 642                DBG_ERR(
 643                        ("A: A(%d) bri_start_adapter, adapter already running",
 644                         IoAdapter->ANum)) return (-1);
 645        }
 646        if (!IoAdapter->port) {
 647                DBG_ERR(("A: A(%d) bri_start_adapter, adapter not mapped",
 648                         IoAdapter->ANum)) return (-1);
 649        }
 650
 651        sprintf(IoAdapter->Name, "A(%d)", (int) IoAdapter->ANum);
 652        DBG_LOG(("A(%d) start BRI", IoAdapter->ANum))
 653
 654        Port = DIVA_OS_MEM_ATTACH_PORT(IoAdapter);
 655        addrHi = Port +
 656            ((IoAdapter->Properties.Bus == BUS_PCI) ? M_PCI_ADDRH : ADDRH);
 657        addrLo = Port + ADDR;
 658        ioaddr = Port + DATA;
 659
 660        outpp(addrHi,
 661              (byte) (
 662                      (IoAdapter->MemoryBase + IoAdapter->MemorySize -
 663                       BRI_SHARED_RAM_SIZE) >> 16));
 664        outppw(addrLo, 0x1e);
 665        outppw(ioaddr, 0x00);
 666        DIVA_OS_MEM_DETACH_PORT(IoAdapter, Port);
 667
 668        /*
 669           start the protocol code
 670         */
 671        Port = DIVA_OS_MEM_ATTACH_CTLREG(IoAdapter);
 672        outpp(Port, 0x08);
 673        DIVA_OS_MEM_DETACH_CTLREG(IoAdapter, Port);
 674
 675        Port = DIVA_OS_MEM_ATTACH_PORT(IoAdapter);
 676        addrHi = Port +
 677            ((IoAdapter->Properties.Bus == BUS_PCI) ? M_PCI_ADDRH : ADDRH);
 678        addrLo = Port + ADDR;
 679        ioaddr = Port + DATA;
 680        /*
 681           wait for signature (max. 3 seconds)
 682         */
 683        for (i = 0; i < 300; ++i) {
 684                diva_os_wait(10);
 685                outpp(addrHi,
 686                      (byte) (
 687                              (IoAdapter->MemoryBase +
 688                               IoAdapter->MemorySize -
 689                               BRI_SHARED_RAM_SIZE) >> 16));
 690                outppw(addrLo, 0x1e);
 691                test = (dword) inppw(ioaddr);
 692                if (test == 0x4447) {
 693                        DBG_LOG(
 694                                ("Protocol startup time %d.%02d seconds",
 695                                 (i / 100), (i % 100)))
 696                        started = 1;
 697                        break;
 698                }
 699        }
 700        DIVA_OS_MEM_DETACH_PORT(IoAdapter, Port);
 701
 702        if (!started) {
 703                DBG_FTL(("A: A(%d) %s: Adapter selftest failed 0x%04X",
 704                         IoAdapter->ANum, IoAdapter->Properties.Name,
 705                         test))
 706                (*(IoAdapter->trapFnc)) (IoAdapter);
 707                return (-1);
 708        }
 709
 710        IoAdapter->Initialized = 1;
 711
 712        /*
 713           Check Interrupt
 714         */
 715        IoAdapter->IrqCount = 0;
 716        a->ReadyInt = 1;
 717
 718        if (IoAdapter->reset) {
 719                Port = DIVA_OS_MEM_ATTACH_RESET(IoAdapter);
 720                outpp(Port, 0x41);
 721                DIVA_OS_MEM_DETACH_RESET(IoAdapter, Port);
 722        }
 723
 724        a->ram_out(a, &PR_RAM->ReadyInt, 1);
 725        for (i = 0; ((!IoAdapter->IrqCount) && (i < 100)); i++) {
 726                diva_os_wait(10);
 727        }
 728        if (!IoAdapter->IrqCount) {
 729                DBG_ERR(
 730                        ("A: A(%d) interrupt test failed",
 731                         IoAdapter->ANum))
 732                IoAdapter->Initialized = 0;
 733                IoAdapter->stop(IoAdapter);
 734                return (-1);
 735        }
 736
 737        IoAdapter->Properties.Features = (word) features;
 738        diva_xdi_display_adapter_features(IoAdapter->ANum);
 739        DBG_LOG(("A(%d) BRI adapter successfully started", IoAdapter->ANum))
 740            /*
 741               Register with DIDD
 742             */
 743        diva_xdi_didd_register_adapter(IoAdapter->ANum);
 744
 745        return (0);
 746}
 747
 748static void diva_bri_clear_interrupts(diva_os_xdi_adapter_t * a)
 749{
 750        PISDN_ADAPTER IoAdapter = &a->xdi_adapter;
 751
 752        /*
 753           clear any pending interrupt
 754         */
 755        IoAdapter->disIrq(IoAdapter);
 756
 757        IoAdapter->tst_irq(&IoAdapter->a);
 758        IoAdapter->clr_irq(&IoAdapter->a);
 759        IoAdapter->tst_irq(&IoAdapter->a);
 760
 761        /*
 762           kill pending dpcs
 763         */
 764        diva_os_cancel_soft_isr(&IoAdapter->req_soft_isr);
 765        diva_os_cancel_soft_isr(&IoAdapter->isr_soft_isr);
 766}
 767
 768/*
 769**  Stop card
 770*/
 771static int diva_bri_stop_adapter(diva_os_xdi_adapter_t * a)
 772{
 773        PISDN_ADAPTER IoAdapter = &a->xdi_adapter;
 774        int i = 100;
 775
 776        if (!IoAdapter->port) {
 777                return (-1);
 778        }
 779        if (!IoAdapter->Initialized) {
 780                DBG_ERR(("A: A(%d) can't stop BRI adapter - not running",
 781                         IoAdapter->ANum))
 782                return (-1);    /* nothing to stop */
 783        }
 784        IoAdapter->Initialized = 0;
 785
 786        /*
 787           Disconnect Adapter from DIDD
 788         */
 789        diva_xdi_didd_remove_adapter(IoAdapter->ANum);
 790
 791        /*
 792           Stop interrupts
 793         */
 794        a->clear_interrupts_proc = diva_bri_clear_interrupts;
 795        IoAdapter->a.ReadyInt = 1;
 796        IoAdapter->a.ram_inc(&IoAdapter->a, &PR_RAM->ReadyInt);
 797        do {
 798                diva_os_sleep(10);
 799        } while (i-- && a->clear_interrupts_proc);
 800        if (a->clear_interrupts_proc) {
 801                diva_bri_clear_interrupts(a);
 802                a->clear_interrupts_proc = NULL;
 803                DBG_ERR(("A: A(%d) no final interrupt from BRI adapter",
 804                         IoAdapter->ANum))
 805        }
 806        IoAdapter->a.ReadyInt = 0;
 807
 808        /*
 809           Stop and reset adapter
 810         */
 811        IoAdapter->stop(IoAdapter);
 812
 813        return (0);
 814}
 815