1
2
3
4
5
6
7
8
9
10
11
12
13
14#include <linux/init.h>
15#include "hisax.h"
16#include "isac.h"
17#include "ipac.h"
18#include "hscx.h"
19#include "isdnl1.h"
20#include <linux/pci.h>
21#include "bkm_ax.h"
22
23#define ATTEMPT_PCI_REMAPPING
24
25static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
26
27static const char *sct_quadro_subtypes[] =
28{
29 "",
30 "#1",
31 "#2",
32 "#3",
33 "#4"
34};
35
36
37#define wordout(addr,val) outw(val,addr)
38#define wordin(addr) inw(addr)
39
40static inline u_char
41readreg(unsigned int ale, unsigned int adr, u_char off)
42{
43 register u_char ret;
44 wordout(ale, off);
45 ret = wordin(adr) & 0xFF;
46 return (ret);
47}
48
49static inline void
50readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
51{
52 int i;
53 wordout(ale, off);
54 for (i = 0; i < size; i++)
55 data[i] = wordin(adr) & 0xFF;
56}
57
58
59static inline void
60writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
61{
62 wordout(ale, off);
63 wordout(adr, data);
64}
65
66static inline void
67writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
68{
69 int i;
70 wordout(ale, off);
71 for (i = 0; i < size; i++)
72 wordout(adr, data[i]);
73}
74
75
76
77static u_char
78ReadISAC(struct IsdnCardState *cs, u_char offset)
79{
80 return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
81}
82
83static void
84WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
85{
86 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
87}
88
89static void
90ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
91{
92 readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
93}
94
95static void
96WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
97{
98 writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
99}
100
101
102static u_char
103ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
104{
105 return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
106}
107
108static void
109WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
110{
111 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
112}
113
114
115static void
116set_ipac_active(struct IsdnCardState *cs, u_int active)
117{
118
119 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
120 active ? 0xc0 : 0xff);
121}
122
123
124
125
126
127#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
128 cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
129#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
130 cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
131#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
132 cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
133#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
134 cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
135
136#include "hscx_irq.c"
137
138static irqreturn_t
139bkm_interrupt_ipac(int intno, void *dev_id)
140{
141 struct IsdnCardState *cs = dev_id;
142 u_char ista, val, icnt = 5;
143 u_long flags;
144
145 spin_lock_irqsave(&cs->lock, flags);
146 ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
147 if (!(ista & 0x3f)) {
148 spin_unlock_irqrestore(&cs->lock, flags);
149 return IRQ_NONE;
150 }
151 Start_IPAC:
152 if (cs->debug & L1_DEB_IPAC)
153 debugl1(cs, "IPAC ISTA %02X", ista);
154 if (ista & 0x0f) {
155 val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
156 if (ista & 0x01)
157 val |= 0x01;
158 if (ista & 0x04)
159 val |= 0x02;
160 if (ista & 0x08)
161 val |= 0x04;
162 if (val) {
163 hscx_int_main(cs, val);
164 }
165 }
166 if (ista & 0x20) {
167 val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
168 if (val) {
169 isac_interrupt(cs, val);
170 }
171 }
172 if (ista & 0x10) {
173 val = 0x01;
174 isac_interrupt(cs, val);
175 }
176 ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
177 if ((ista & 0x3f) && icnt) {
178 icnt--;
179 goto Start_IPAC;
180 }
181 if (!icnt)
182 printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
183 sct_quadro_subtypes[cs->subtyp]);
184 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
185 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
186 spin_unlock_irqrestore(&cs->lock, flags);
187 return IRQ_HANDLED;
188}
189
190static void
191release_io_sct_quadro(struct IsdnCardState *cs)
192{
193 release_region(cs->hw.ax.base & 0xffffffc0, 128);
194 if (cs->subtyp == SCT_1)
195 release_region(cs->hw.ax.plx_adr, 64);
196}
197
198static void
199enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
200{
201 if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
202 if (bEnable)
203 wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
204 else
205 wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
206 }
207}
208
209static void
210reset_bkm(struct IsdnCardState *cs)
211{
212 if (cs->subtyp == SCT_1) {
213 wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
214 mdelay(10);
215
216 wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
217 mdelay(10);
218 }
219}
220
221static int
222BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
223{
224 u_long flags;
225
226 switch (mt) {
227 case CARD_RESET:
228 spin_lock_irqsave(&cs->lock, flags);
229
230 set_ipac_active(cs, 0);
231 enable_bkm_int(cs, 0);
232 reset_bkm(cs);
233 spin_unlock_irqrestore(&cs->lock, flags);
234 return (0);
235 case CARD_RELEASE:
236
237 spin_lock_irqsave(&cs->lock, flags);
238 set_ipac_active(cs, 0);
239 enable_bkm_int(cs, 0);
240 spin_unlock_irqrestore(&cs->lock, flags);
241 release_io_sct_quadro(cs);
242 return (0);
243 case CARD_INIT:
244 spin_lock_irqsave(&cs->lock, flags);
245 cs->debug |= L1_DEB_IPAC;
246 set_ipac_active(cs, 1);
247 inithscxisac(cs, 3);
248
249 enable_bkm_int(cs, 1);
250 spin_unlock_irqrestore(&cs->lock, flags);
251 return (0);
252 case CARD_TEST:
253 return (0);
254 }
255 return (0);
256}
257
258static int __devinit
259sct_alloc_io(u_int adr, u_int len)
260{
261 if (!request_region(adr, len, "scitel")) {
262 printk(KERN_WARNING
263 "HiSax: Scitel port %#x-%#x already in use\n",
264 adr, adr + len);
265 return (1);
266 }
267 return(0);
268}
269
270static struct pci_dev *dev_a8 __devinitdata = NULL;
271static u16 sub_vendor_id __devinitdata = 0;
272static u16 sub_sys_id __devinitdata = 0;
273static u_char pci_bus __devinitdata = 0;
274static u_char pci_device_fn __devinitdata = 0;
275static u_char pci_irq __devinitdata = 0;
276
277int __devinit
278setup_sct_quadro(struct IsdnCard *card)
279{
280 struct IsdnCardState *cs = card->cs;
281 char tmp[64];
282 u_int found = 0;
283 u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
284
285 strcpy(tmp, sct_quadro_revision);
286 printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
287 if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
288 cs->subtyp = SCT_1;
289 } else
290 return (0);
291
292
293 if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
294 cs->subtyp = card->para[0];
295 else {
296 printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
297 "subcontroller in configuration, default to 1\n");
298 return (0);
299 }
300 if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
301 (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
302 return (0);
303 if (cs->subtyp == SCT_1) {
304 while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
305 PCI_DEVICE_ID_PLX_9050, dev_a8))) {
306
307 sub_vendor_id = dev_a8->subsystem_vendor;
308 sub_sys_id = dev_a8->subsystem_device;
309 if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
310 (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
311 if (pci_enable_device(dev_a8))
312 return(0);
313 pci_ioaddr1 = pci_resource_start(dev_a8, 1);
314 pci_irq = dev_a8->irq;
315 pci_bus = dev_a8->bus->number;
316 pci_device_fn = dev_a8->devfn;
317 found = 1;
318 break;
319 }
320 }
321 if (!found) {
322 printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
323 "Card not found\n",
324 sct_quadro_subtypes[cs->subtyp]);
325 return (0);
326 }
327#ifdef ATTEMPT_PCI_REMAPPING
328
329 if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
330 printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
331 "PLX rev 1, remapping required!\n",
332 sct_quadro_subtypes[cs->subtyp]);
333
334 pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
335
336 pci_ioaddr1 += 0x80;
337 pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
338 pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
339 dev_a8->resource[ 1].start = pci_ioaddr1;
340 }
341#endif
342 }
343 if (!pci_irq) {
344 printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
345 sct_quadro_subtypes[cs->subtyp]);
346 return (0);
347 }
348 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
349 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
350 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
351 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
352 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
353 if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
354 printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
355 "No IO base address(es)\n",
356 sct_quadro_subtypes[cs->subtyp]);
357 return (0);
358 }
359 pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
360 pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
361 pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
362 pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
363 pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
364
365 cs->irq = pci_irq;
366 cs->irq_flags |= IRQF_SHARED;
367
368
369
370
371
372 cs->hw.ax.plx_adr = pci_ioaddr1;
373
374 switch(cs->subtyp) {
375 case 1:
376 cs->hw.ax.base = pci_ioaddr5 + 0x00;
377 if (sct_alloc_io(pci_ioaddr1, 128))
378 return(0);
379 if (sct_alloc_io(pci_ioaddr5, 64))
380 return(0);
381
382 writereg(pci_ioaddr5, pci_ioaddr5 + 4,
383 IPAC_MASK, 0xFF);
384 writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
385 IPAC_MASK, 0xFF);
386 writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
387 IPAC_MASK, 0xFF);
388 writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
389 IPAC_MASK, 0xFF);
390 break;
391 case 2:
392 cs->hw.ax.base = pci_ioaddr4 + 0x08;
393 if (sct_alloc_io(pci_ioaddr4, 64))
394 return(0);
395 break;
396 case 3:
397 cs->hw.ax.base = pci_ioaddr3 + 0x10;
398 if (sct_alloc_io(pci_ioaddr3, 64))
399 return(0);
400 break;
401 case 4:
402 cs->hw.ax.base = pci_ioaddr2 + 0x20;
403 if (sct_alloc_io(pci_ioaddr2, 64))
404 return(0);
405 break;
406 }
407
408 cs->hw.ax.data_adr = cs->hw.ax.base + 4;
409
410 printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
411 "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
412 sct_quadro_subtypes[cs->subtyp],
413 cs->hw.ax.plx_adr,
414 cs->hw.ax.base,
415 cs->hw.ax.data_adr,
416 cs->irq);
417
418 test_and_set_bit(HW_IPAC, &cs->HW_Flags);
419
420 cs->readisac = &ReadISAC;
421 cs->writeisac = &WriteISAC;
422 cs->readisacfifo = &ReadISACfifo;
423 cs->writeisacfifo = &WriteISACfifo;
424
425 cs->BC_Read_Reg = &ReadHSCX;
426 cs->BC_Write_Reg = &WriteHSCX;
427 cs->BC_Send_Data = &hscx_fill_fifo;
428 cs->cardmsg = &BKM_card_msg;
429 cs->irq_func = &bkm_interrupt_ipac;
430
431 printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
432 sct_quadro_subtypes[cs->subtyp],
433 readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
434 return (1);
435}
436
