1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30#include <linux/module.h>
31#include <linux/kernel.h>
32#include <linux/pci.h>
33#include <asm/io.h>
34#include <linux/ioport.h>
35#include <asm/pgtable.h>
36#include <asm/page.h>
37#include <linux/types.h>
38#include <linux/interrupt.h>
39#include <linux/kmod.h>
40#include <linux/vmalloc.h>
41#include <linux/init.h>
42
43#include "dmxdev.h"
44#include "dvbdev.h"
45#include "bt878.h"
46#include "dst_priv.h"
47
48
49
50
51
52
53static unsigned int bt878_verbose = 1;
54static unsigned int bt878_debug;
55
56module_param_named(verbose, bt878_verbose, int, 0444);
57MODULE_PARM_DESC(verbose,
58 "verbose startup messages, default is 1 (yes)");
59module_param_named(debug, bt878_debug, int, 0644);
60MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off).");
61
62int bt878_num;
63struct bt878 bt878[BT878_MAX];
64
65EXPORT_SYMBOL(bt878_num);
66EXPORT_SYMBOL(bt878);
67
68#define btwrite(dat,adr) bmtwrite((dat), (bt->bt878_mem+(adr)))
69#define btread(adr) bmtread(bt->bt878_mem+(adr))
70
71#define btand(dat,adr) btwrite((dat) & btread(adr), adr)
72#define btor(dat,adr) btwrite((dat) | btread(adr), adr)
73#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
74
75#if defined(dprintk)
76#undef dprintk
77#endif
78#define dprintk(fmt, arg...) \
79 do { \
80 if (bt878_debug) \
81 printk(KERN_DEBUG fmt, ##arg); \
82 } while (0)
83
84static void bt878_mem_free(struct bt878 *bt)
85{
86 if (bt->buf_cpu) {
87 pci_free_consistent(bt->dev, bt->buf_size, bt->buf_cpu,
88 bt->buf_dma);
89 bt->buf_cpu = NULL;
90 }
91
92 if (bt->risc_cpu) {
93 pci_free_consistent(bt->dev, bt->risc_size, bt->risc_cpu,
94 bt->risc_dma);
95 bt->risc_cpu = NULL;
96 }
97}
98
99static int bt878_mem_alloc(struct bt878 *bt)
100{
101 if (!bt->buf_cpu) {
102 bt->buf_size = 128 * 1024;
103
104 bt->buf_cpu =
105 pci_alloc_consistent(bt->dev, bt->buf_size,
106 &bt->buf_dma);
107
108 if (!bt->buf_cpu)
109 return -ENOMEM;
110
111 memset(bt->buf_cpu, 0, bt->buf_size);
112 }
113
114 if (!bt->risc_cpu) {
115 bt->risc_size = PAGE_SIZE;
116 bt->risc_cpu =
117 pci_alloc_consistent(bt->dev, bt->risc_size,
118 &bt->risc_dma);
119
120 if (!bt->risc_cpu) {
121 bt878_mem_free(bt);
122 return -ENOMEM;
123 }
124
125 memset(bt->risc_cpu, 0, bt->risc_size);
126 }
127
128 return 0;
129}
130
131
132#define RISC_WRITE (0x01 << 28)
133#define RISC_JUMP (0x07 << 28)
134#define RISC_SYNC (0x08 << 28)
135
136
137#define RISC_WR_SOL (1 << 27)
138#define RISC_WR_EOL (1 << 26)
139#define RISC_IRQ (1 << 24)
140#define RISC_STATUS(status) ((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16))
141#define RISC_SYNC_RESYNC (1 << 15)
142#define RISC_SYNC_FM1 0x06
143#define RISC_SYNC_VRO 0x0C
144
145#define RISC_FLUSH() bt->risc_pos = 0
146#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr)
147
148static int bt878_make_risc(struct bt878 *bt)
149{
150 bt->block_bytes = bt->buf_size >> 4;
151 bt->block_count = 1 << 4;
152 bt->line_bytes = bt->block_bytes;
153 bt->line_count = bt->block_count;
154
155 while (bt->line_bytes > 4095) {
156 bt->line_bytes >>= 1;
157 bt->line_count <<= 1;
158 }
159
160 if (bt->line_count > 255) {
161 printk(KERN_ERR "bt878: buffer size error!\n");
162 return -EINVAL;
163 }
164 return 0;
165}
166
167
168static void bt878_risc_program(struct bt878 *bt, u32 op_sync_orin)
169{
170 u32 buf_pos = 0;
171 u32 line;
172
173 RISC_FLUSH();
174 RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin);
175 RISC_INSTR(0);
176
177 dprintk("bt878: risc len lines %u, bytes per line %u\n",
178 bt->line_count, bt->line_bytes);
179 for (line = 0; line < bt->line_count; line++) {
180
181 if (!(buf_pos % bt->block_bytes))
182 RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
183 RISC_IRQ |
184 RISC_STATUS(((buf_pos /
185 bt->block_bytes) +
186 (bt->block_count -
187 1)) %
188 bt->block_count) | bt->
189 line_bytes);
190 else
191 RISC_INSTR(RISC_WRITE | RISC_WR_SOL | RISC_WR_EOL |
192 bt->line_bytes);
193 RISC_INSTR(bt->buf_dma + buf_pos);
194 buf_pos += bt->line_bytes;
195 }
196
197 RISC_INSTR(RISC_SYNC | op_sync_orin | RISC_SYNC_VRO);
198 RISC_INSTR(0);
199
200 RISC_INSTR(RISC_JUMP);
201 RISC_INSTR(bt->risc_dma);
202
203 btwrite((bt->line_count << 16) | bt->line_bytes, BT878_APACK_LEN);
204}
205
206
207
208
209
210void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin,
211 u32 irq_err_ignore)
212{
213 u32 int_mask;
214
215 dprintk("bt878 debug: bt878_start (ctl=%8.8x)\n", controlreg);
216
217
218
219 bt878_risc_program(bt, op_sync_orin);
220 controlreg &= ~0x1f;
221 controlreg |= 0x1b;
222
223 btwrite(bt->risc_dma, BT878_ARISC_START);
224
225
226
227
228
229
230
231
232 int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT |
233 BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT |
234 BT878_AFBUS | BT878_ARISCI;
235
236
237
238 int_mask &= ~irq_err_ignore;
239
240 btwrite(int_mask, BT878_AINT_MASK);
241 btwrite(controlreg, BT878_AGPIO_DMA_CTL);
242}
243
244void bt878_stop(struct bt878 *bt)
245{
246 u32 stat;
247 int i = 0;
248
249 dprintk("bt878 debug: bt878_stop\n");
250
251 btwrite(0, BT878_AINT_MASK);
252 btand(~0x13, BT878_AGPIO_DMA_CTL);
253
254 do {
255 stat = btread(BT878_AINT_STAT);
256 if (!(stat & BT878_ARISC_EN))
257 break;
258 i++;
259 } while (i < 500);
260
261 dprintk("bt878(%d) debug: bt878_stop, i=%d, stat=0x%8.8x\n",
262 bt->nr, i, stat);
263}
264
265EXPORT_SYMBOL(bt878_start);
266EXPORT_SYMBOL(bt878_stop);
267
268
269
270
271
272static irqreturn_t bt878_irq(int irq, void *dev_id)
273{
274 u32 stat, astat, mask;
275 int count;
276 struct bt878 *bt;
277
278 bt = (struct bt878 *) dev_id;
279
280 count = 0;
281 while (1) {
282 stat = btread(BT878_AINT_STAT);
283 mask = btread(BT878_AINT_MASK);
284 if (!(astat = (stat & mask)))
285 return IRQ_NONE;
286
287 btwrite(astat, BT878_AINT_STAT);
288
289
290 if (astat & (BT878_ASCERR | BT878_AOCERR)) {
291 if (bt878_verbose) {
292 printk(KERN_INFO
293 "bt878(%d): irq%s%s risc_pc=%08x\n",
294 bt->nr,
295 (astat & BT878_ASCERR) ? " SCERR" :
296 "",
297 (astat & BT878_AOCERR) ? " OCERR" :
298 "", btread(BT878_ARISC_PC));
299 }
300 }
301 if (astat & (BT878_APABORT | BT878_ARIPERR | BT878_APPERR)) {
302 if (bt878_verbose) {
303 printk(KERN_INFO
304 "bt878(%d): irq%s%s%s risc_pc=%08x\n",
305 bt->nr,
306 (astat & BT878_APABORT) ? " PABORT" :
307 "",
308 (astat & BT878_ARIPERR) ? " RIPERR" :
309 "",
310 (astat & BT878_APPERR) ? " PPERR" :
311 "", btread(BT878_ARISC_PC));
312 }
313 }
314 if (astat & (BT878_AFDSR | BT878_AFTRGT | BT878_AFBUS)) {
315 if (bt878_verbose) {
316 printk(KERN_INFO
317 "bt878(%d): irq%s%s%s risc_pc=%08x\n",
318 bt->nr,
319 (astat & BT878_AFDSR) ? " FDSR" : "",
320 (astat & BT878_AFTRGT) ? " FTRGT" :
321 "",
322 (astat & BT878_AFBUS) ? " FBUS" : "",
323 btread(BT878_ARISC_PC));
324 }
325 }
326 if (astat & BT878_ARISCI) {
327 bt->finished_block = (stat & BT878_ARISCS) >> 28;
328 tasklet_schedule(&bt->tasklet);
329 break;
330 }
331 count++;
332 if (count > 20) {
333 btwrite(0, BT878_AINT_MASK);
334 printk(KERN_ERR
335 "bt878(%d): IRQ lockup, cleared int mask\n",
336 bt->nr);
337 break;
338 }
339 }
340 return IRQ_HANDLED;
341}
342
343int
344bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp)
345{
346 int retval;
347
348 retval = 0;
349 if (mutex_lock_interruptible(&bt->gpio_lock))
350 return -ERESTARTSYS;
351
352 switch (cmd) {
353 case DST_IG_ENABLE:
354
355 retval = bttv_gpio_enable(bt->bttv_nr,
356 mp->enb.mask,
357 mp->enb.enable);
358 break;
359 case DST_IG_WRITE:
360
361 retval = bttv_write_gpio(bt->bttv_nr,
362 mp->outp.mask,
363 mp->outp.highvals);
364
365 break;
366 case DST_IG_READ:
367
368 retval = bttv_read_gpio(bt->bttv_nr, &mp->rd.value);
369
370 break;
371 case DST_IG_TS:
372
373 bt->TS_Size = mp->psize;
374 break;
375
376 default:
377 retval = -EINVAL;
378 break;
379 }
380 mutex_unlock(&bt->gpio_lock);
381 return retval;
382}
383
384EXPORT_SYMBOL(bt878_device_control);
385
386#define BROOKTREE_878_DEVICE(vend, dev, name) \
387 { \
388 .vendor = PCI_VENDOR_ID_BROOKTREE, \
389 .device = PCI_DEVICE_ID_BROOKTREE_878, \
390 .subvendor = (vend), .subdevice = (dev), \
391 .driver_data = (unsigned long) name \
392 }
393
394static struct pci_device_id bt878_pci_tbl[] __devinitdata = {
395 BROOKTREE_878_DEVICE(0x0071, 0x0101, "Nebula Electronics DigiTV"),
396 BROOKTREE_878_DEVICE(0x1461, 0x0761, "AverMedia AverTV DVB-T 761"),
397 BROOKTREE_878_DEVICE(0x11bd, 0x001c, "Pinnacle PCTV Sat"),
398 BROOKTREE_878_DEVICE(0x11bd, 0x0026, "Pinnacle PCTV SAT CI"),
399 BROOKTREE_878_DEVICE(0x1822, 0x0001, "Twinhan VisionPlus DVB"),
400 BROOKTREE_878_DEVICE(0x270f, 0xfc00,
401 "ChainTech digitop DST-1000 DVB-S"),
402 BROOKTREE_878_DEVICE(0x1461, 0x0771, "AVermedia AverTV DVB-T 771"),
403 BROOKTREE_878_DEVICE(0x18ac, 0xdb10, "DViCO FusionHDTV DVB-T Lite"),
404 BROOKTREE_878_DEVICE(0x18ac, 0xdb11, "Ultraview DVB-T Lite"),
405 BROOKTREE_878_DEVICE(0x18ac, 0xd500, "DViCO FusionHDTV 5 Lite"),
406 BROOKTREE_878_DEVICE(0x7063, 0x2000, "pcHDTV HD-2000 TV"),
407 BROOKTREE_878_DEVICE(0x1822, 0x0026, "DNTV Live! Mini"),
408 { }
409};
410
411MODULE_DEVICE_TABLE(pci, bt878_pci_tbl);
412
413static const char * __devinit card_name(const struct pci_device_id *id)
414{
415 return id->driver_data ? (const char *)id->driver_data : "Unknown";
416}
417
418
419
420
421
422static int __devinit bt878_probe(struct pci_dev *dev,
423 const struct pci_device_id *pci_id)
424{
425 int result = 0;
426 unsigned char lat;
427 struct bt878 *bt;
428#if defined(__powerpc__)
429 unsigned int cmd;
430#endif
431 unsigned int cardid;
432
433 printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
434 bt878_num);
435 if (bt878_num >= BT878_MAX) {
436 printk(KERN_ERR "bt878: Too many devices inserted\n");
437 result = -ENOMEM;
438 goto fail0;
439 }
440 if (pci_enable_device(dev))
441 return -EIO;
442
443 cardid = dev->subsystem_device << 16;
444 cardid |= dev->subsystem_vendor;
445
446 printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n",
447 __func__, cardid, card_name(pci_id));
448
449 bt = &bt878[bt878_num];
450 bt->dev = dev;
451 bt->nr = bt878_num;
452 bt->shutdown = 0;
453
454 bt->id = dev->device;
455 bt->irq = dev->irq;
456 bt->bt878_adr = pci_resource_start(dev, 0);
457 if (!request_mem_region(pci_resource_start(dev, 0),
458 pci_resource_len(dev, 0), "bt878")) {
459 result = -EBUSY;
460 goto fail0;
461 }
462
463 pci_read_config_byte(dev, PCI_CLASS_REVISION, &bt->revision);
464 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
465
466
467 printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
468 bt878_num, bt->id, bt->revision, dev->bus->number,
469 PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
470 printk("irq: %d, latency: %d, memory: 0x%lx\n",
471 bt->irq, lat, bt->bt878_adr);
472
473
474#if defined(__powerpc__)
475
476
477 pci_read_config_dword(dev, PCI_COMMAND, &cmd);
478 cmd = (cmd | PCI_COMMAND_MEMORY);
479 pci_write_config_dword(dev, PCI_COMMAND, cmd);
480#endif
481
482#ifdef __sparc__
483 bt->bt878_mem = (unsigned char *) bt->bt878_adr;
484#else
485 bt->bt878_mem = ioremap(bt->bt878_adr, 0x1000);
486#endif
487
488
489 btwrite(0, BT848_INT_MASK);
490
491 result = request_irq(bt->irq, bt878_irq,
492 IRQF_SHARED | IRQF_DISABLED, "bt878",
493 (void *) bt);
494 if (result == -EINVAL) {
495 printk(KERN_ERR "bt878(%d): Bad irq number or handler\n",
496 bt878_num);
497 goto fail1;
498 }
499 if (result == -EBUSY) {
500 printk(KERN_ERR
501 "bt878(%d): IRQ %d busy, change your PnP config in BIOS\n",
502 bt878_num, bt->irq);
503 goto fail1;
504 }
505 if (result < 0)
506 goto fail1;
507
508 pci_set_master(dev);
509 pci_set_drvdata(dev, bt);
510
511 if ((result = bt878_mem_alloc(bt))) {
512 printk(KERN_ERR "bt878: failed to allocate memory!\n");
513 goto fail2;
514 }
515
516 bt878_make_risc(bt);
517 btwrite(0, BT878_AINT_MASK);
518 bt878_num++;
519
520 return 0;
521
522 fail2:
523 free_irq(bt->irq, bt);
524 fail1:
525 release_mem_region(pci_resource_start(bt->dev, 0),
526 pci_resource_len(bt->dev, 0));
527 fail0:
528 pci_disable_device(dev);
529 return result;
530}
531
532static void __devexit bt878_remove(struct pci_dev *pci_dev)
533{
534 u8 command;
535 struct bt878 *bt = pci_get_drvdata(pci_dev);
536
537 if (bt878_verbose)
538 printk(KERN_INFO "bt878(%d): unloading\n", bt->nr);
539
540
541 btand(~0x13, BT878_AGPIO_DMA_CTL);
542
543
544 btwrite(0, BT878_AINT_MASK);
545 btwrite(~0U, BT878_AINT_STAT);
546
547
548 pci_read_config_byte(bt->dev, PCI_COMMAND, &command);
549
550 command &= ~PCI_COMMAND_MASTER;
551 pci_write_config_byte(bt->dev, PCI_COMMAND, command);
552
553 free_irq(bt->irq, bt);
554 printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem);
555 if (bt->bt878_mem)
556 iounmap(bt->bt878_mem);
557
558 release_mem_region(pci_resource_start(bt->dev, 0),
559 pci_resource_len(bt->dev, 0));
560
561
562
563
564 bt->shutdown = 1;
565 bt878_mem_free(bt);
566
567 pci_set_drvdata(pci_dev, NULL);
568 pci_disable_device(pci_dev);
569 return;
570}
571
572static struct pci_driver bt878_pci_driver = {
573 .name = "bt878",
574 .id_table = bt878_pci_tbl,
575 .probe = bt878_probe,
576 .remove = __devexit_p(bt878_remove),
577};
578
579static int bt878_pci_driver_registered;
580
581
582
583
584
585static int bt878_init_module(void)
586{
587 bt878_num = 0;
588 bt878_pci_driver_registered = 0;
589
590 printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n",
591 (BT878_VERSION_CODE >> 16) & 0xff,
592 (BT878_VERSION_CODE >> 8) & 0xff,
593 BT878_VERSION_CODE & 0xff);
594
595
596
597
598
599 bt878_pci_driver_registered = 1;
600 return pci_register_driver(&bt878_pci_driver);
601}
602
603static void bt878_cleanup_module(void)
604{
605 if (bt878_pci_driver_registered) {
606 bt878_pci_driver_registered = 0;
607 pci_unregister_driver(&bt878_pci_driver);
608 }
609 return;
610}
611
612module_init(bt878_init_module);
613module_exit(bt878_cleanup_module);
614
615
616MODULE_LICENSE("GPL");
617
618
619
620
621
622
623
