/*
 * bt856 - BT856A Digital Video Encoder (Rockwell Part)
 *
 * Copyright (C) 1999 Mike Bernson <mike@mlb.org>
 * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
 *
 * Modifications for LML33/DC10plus unified driver
 * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
 *
 * This code was modify/ported from the saa7111 driver written
 * by Dave Perks.
 *
 * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
 *   - moved over to linux>=2.4.x i2c protocol (9/9/2002)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>

MODULE_DESCRIPTION("Brooktree-856A video encoder driver");
MODULE_AUTHOR("Mike Bernson & Dave Perks");
MODULE_LICENSE("GPL");

static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");


/* ----------------------------------------------------------------------- */

#define BT856_REG_OFFSET        0xDA
#define BT856_NR_REG            6

struct bt856 {
        struct v4l2_subdev sd;
        unsigned char reg[BT856_NR_REG];

        v4l2_std_id norm;
};

static inline struct bt856 *to_bt856(struct v4l2_subdev *sd)
{
        return container_of(sd, struct bt856, sd);
}

/* ----------------------------------------------------------------------- */

static inline int bt856_write(struct bt856 *encoder, u8 reg, u8 value)
{
        struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd);

        encoder->reg[reg - BT856_REG_OFFSET] = value;
        return i2c_smbus_write_byte_data(client, reg, value);
}

static inline int bt856_setbit(struct bt856 *encoder, u8 reg, u8 bit, u8 value)
{
        return bt856_write(encoder, reg,
                (encoder->reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) |
                                (value ? (1 << bit) : 0));
}

static void bt856_dump(struct bt856 *encoder)
{
        int i;

        v4l2_info(&encoder->sd, "register dump:\n");
        for (i = 0; i < BT856_NR_REG; i += 2)
                printk(KERN_CONT " %02x", encoder->reg[i]);
        printk(KERN_CONT "\n");
}

/* ----------------------------------------------------------------------- */

static int bt856_init(struct v4l2_subdev *sd, u32 arg)
{
        struct bt856 *encoder = to_bt856(sd);

        /* This is just for testing!!! */
        v4l2_dbg(1, debug, sd, "init\n");
        bt856_write(encoder, 0xdc, 0x18);
        bt856_write(encoder, 0xda, 0);
        bt856_write(encoder, 0xde, 0);

        bt856_setbit(encoder, 0xdc, 3, 1);
        /*bt856_setbit(encoder, 0xdc, 6, 0);*/
        bt856_setbit(encoder, 0xdc, 4, 1);

        if (encoder->norm & V4L2_STD_NTSC)
                bt856_setbit(encoder, 0xdc, 2, 0);
        else
                bt856_setbit(encoder, 0xdc, 2, 1);

        bt856_setbit(encoder, 0xdc, 1, 1);
        bt856_setbit(encoder, 0xde, 4, 0);
        bt856_setbit(encoder, 0xde, 3, 1);
        if (debug != 0)
                bt856_dump(encoder);
        return 0;
}

static int bt856_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
{
        struct bt856 *encoder = to_bt856(sd);

        v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);

        if (std & V4L2_STD_NTSC) {
                bt856_setbit(encoder, 0xdc, 2, 0);
        } else if (std & V4L2_STD_PAL) {
                bt856_setbit(encoder, 0xdc, 2, 1);
                bt856_setbit(encoder, 0xda, 0, 0);
                /*bt856_setbit(encoder, 0xda, 0, 1);*/
        } else {
                return -EINVAL;
        }
        encoder->norm = std;
        if (debug != 0)
                bt856_dump(encoder);
        return 0;
}

static int bt856_s_routing(struct v4l2_subdev *sd,
                           u32 input, u32 output, u32 config)
{
        struct bt856 *encoder = to_bt856(sd);

        v4l2_dbg(1, debug, sd, "set input %d\n", input);

        /* We only have video bus.
         * input= 0: input is from bt819
         * input= 1: input is from ZR36060 */
        switch (input) {
        case 0:
                bt856_setbit(encoder, 0xde, 4, 0);
                bt856_setbit(encoder, 0xde, 3, 1);
                bt856_setbit(encoder, 0xdc, 3, 1);
                bt856_setbit(encoder, 0xdc, 6, 0);
                break;
        case 1:
                bt856_setbit(encoder, 0xde, 4, 0);
                bt856_setbit(encoder, 0xde, 3, 1);
                bt856_setbit(encoder, 0xdc, 3, 1);
                bt856_setbit(encoder, 0xdc, 6, 1);
                break;
        case 2: /* Color bar */
                bt856_setbit(encoder, 0xdc, 3, 0);
                bt856_setbit(encoder, 0xde, 4, 1);
                break;
        default:
                return -EINVAL;
        }

        if (debug != 0)
                bt856_dump(encoder);
        return 0;
}

static int bt856_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
{
        struct i2c_client *client = v4l2_get_subdevdata(sd);

        return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT856, 0);
}

/* ----------------------------------------------------------------------- */

static const struct v4l2_subdev_core_ops bt856_core_ops = {
        .g_chip_ident = bt856_g_chip_ident,
        .init = bt856_init,
};

static const struct v4l2_subdev_video_ops bt856_video_ops = {
        .s_std_output = bt856_s_std_output,
        .s_routing = bt856_s_routing,
};

static const struct v4l2_subdev_ops bt856_ops = {
        .core = &bt856_core_ops,
        .video = &bt856_video_ops,
};

/* ----------------------------------------------------------------------- */

static int bt856_probe(struct i2c_client *client,
                        const struct i2c_device_id *id)
{
        struct bt856 *encoder;
        struct v4l2_subdev *sd;

        /* Check if the adapter supports the needed features */
        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                return -ENODEV;

        v4l_info(client, "chip found @ 0x%x (%s)\n",
                        client->addr << 1, client->adapter->name);

        encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL);
        if (encoder == NULL)
                return -ENOMEM;
        sd = &encoder->sd;
        v4l2_i2c_subdev_init(sd, client, &bt856_ops);
        encoder->norm = V4L2_STD_NTSC;

        bt856_write(encoder, 0xdc, 0x18);
        bt856_write(encoder, 0xda, 0);
        bt856_write(encoder, 0xde, 0);

        bt856_setbit(encoder, 0xdc, 3, 1);
        /*bt856_setbit(encoder, 0xdc, 6, 0);*/
        bt856_setbit(encoder, 0xdc, 4, 1);

        if (encoder->norm & V4L2_STD_NTSC)
                bt856_setbit(encoder, 0xdc, 2, 0);
        else
                bt856_setbit(encoder, 0xdc, 2, 1);

        bt856_setbit(encoder, 0xdc, 1, 1);
        bt856_setbit(encoder, 0xde, 4, 0);
        bt856_setbit(encoder, 0xde, 3, 1);

        if (debug != 0)
                bt856_dump(encoder);
        return 0;
}

static int bt856_remove(struct i2c_client *client)
{
        struct v4l2_subdev *sd = i2c_get_clientdata(client);

        v4l2_device_unregister_subdev(sd);
        kfree(to_bt856(sd));
        return 0;
}

static const struct i2c_device_id bt856_id[] = {
        { "bt856", 0 },
        { }
};
MODULE_DEVICE_TABLE(i2c, bt856_id);

static struct v4l2_i2c_driver_data v4l2_i2c_data = {
        .name = "bt856",
        .probe = bt856_probe,
        .remove = bt856_remove,
        .id_table = bt856_id,
};