/*
 * For the STS-Thompson TDA7432 audio processor chip
 *
 * Handles audio functions: volume, balance, tone, loudness
 * This driver will not complain if used with any
 * other i2c device with the same address.
 *
 * Muting and tone control by Jonathan Isom <jisom@ematic.com>
 *
 * Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com>
 * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
 * This code is placed under the terms of the GNU General Public License
 * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
 * Which was based on tda8425.c by Greg Alexander (c) 1998
 *
 * OPTIONS:
 * debug    - set to 1 if you'd like to see debug messages
 *            set to 2 if you'd like to be inundated with debug messages
 *
 * loudness - set between 0 and 15 for varying degrees of loudness effect
 *
 * maxvol   - set maximium volume to +20db (1), default is 0db(0)
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/i2c.h>

#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/i2c-addr.h>
#include <media/v4l2-i2c-drv.h>

#ifndef VIDEO_AUDIO_BALANCE
# define VIDEO_AUDIO_BALANCE 32
#endif

MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>");
MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip");
MODULE_LICENSE("GPL");

static int maxvol;
static int loudness; /* disable loudness by default */
static int debug;        /* insmod parameter */
module_param(debug, int, S_IRUGO | S_IWUSR);
module_param(loudness, int, S_IRUGO);
MODULE_PARM_DESC(maxvol,"Set maximium volume to +20db (0), default is 0db(1)");
module_param(maxvol, int, S_IRUGO | S_IWUSR);



/* Structure of address and subaddresses for the tda7432 */

struct tda7432 {
        struct v4l2_subdev sd;
        int addr;
        int input;
        int volume;
        int muted;
        int bass, treble;
        int lf, lr, rf, rr;
        int loud;
};

static inline struct tda7432 *to_state(struct v4l2_subdev *sd)
{
        return container_of(sd, struct tda7432, sd);
}

/* The TDA7432 is made by STS-Thompson
 * http://www.st.com
 * http://us.st.com/stonline/books/pdf/docs/4056.pdf
 *
 * TDA7432: I2C-bus controlled basic audio processor
 *
 * The TDA7432 controls basic audio functions like volume, balance,
 * and tone control (including loudness).  It also has four channel
 * output (for front and rear).  Since most vidcap cards probably
 * don't have 4 channel output, this driver will set front & rear
 * together (no independent control).
 */

                /* Subaddresses for TDA7432 */

#define TDA7432_IN      0x00 /* Input select                 */
#define TDA7432_VL      0x01 /* Volume                       */
#define TDA7432_TN      0x02 /* Bass, Treble (Tone)          */
#define TDA7432_LF      0x03 /* Attenuation LF (Left Front)  */
#define TDA7432_LR      0x04 /* Attenuation LR (Left Rear)   */
#define TDA7432_RF      0x05 /* Attenuation RF (Right Front) */
#define TDA7432_RR      0x06 /* Attenuation RR (Right Rear)  */
#define TDA7432_LD      0x07 /* Loudness                     */


                /* Masks for bits in TDA7432 subaddresses */

/* Many of these not used - just for documentation */

/* Subaddress 0x00 - Input selection and bass control */

/* Bits 0,1,2 control input:
 * 0x00 - Stereo input
 * 0x02 - Mono input
 * 0x03 - Mute  (Using Attenuators Plays better with modules)
 * Mono probably isn't used - I'm guessing only the stereo
 * input is connected on most cards, so we'll set it to stereo.
 *
 * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut
 * Bit 4 controls bass range: 0/1 is extended/standard bass range
 *
 * Highest 3 bits not used
 */

#define TDA7432_STEREO_IN       0
#define TDA7432_MONO_IN         2       /* Probably won't be used */
#define TDA7432_BASS_SYM        1 << 3
#define TDA7432_BASS_NORM       1 << 4

/* Subaddress 0x01 - Volume */

/* Lower 7 bits control volume from -79dB to +32dB in 1dB steps
 * Recommended maximum is +20 dB
 *
 * +32dB: 0x00
 * +20dB: 0x0c
 *   0dB: 0x20
 * -79dB: 0x6f
 *
 * MSB (bit 7) controls loudness: 1/0 is loudness on/off
 */

#define TDA7432_VOL_0DB         0x20
#define TDA7432_LD_ON           1 << 7


/* Subaddress 0x02 - Tone control */

/* Bits 0,1,2 control absolute treble gain from 0dB to 14dB
 * 0x0 is 14dB, 0x7 is 0dB
 *
 * Bit 3 controls treble attenuation/gain (sign)
 * 1 = gain (+)
 * 0 = attenuation (-)
 *
 * Bits 4,5,6 control absolute bass gain from 0dB to 14dB
 * (This is only true for normal base range, set in 0x00)
 * 0x0 << 4 is 14dB, 0x7 is 0dB
 *
 * Bit 7 controls bass attenuation/gain (sign)
 * 1 << 7 = gain (+)
 * 0 << 7 = attenuation (-)
 *
 * Example:
 * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble
 */

#define TDA7432_TREBLE_0DB              0xf
#define TDA7432_TREBLE                  7
#define TDA7432_TREBLE_GAIN             1 << 3
#define TDA7432_BASS_0DB                0xf
#define TDA7432_BASS                    7 << 4
#define TDA7432_BASS_GAIN               1 << 7


/* Subaddress 0x03 - Left  Front attenuation */
/* Subaddress 0x04 - Left  Rear  attenuation */
/* Subaddress 0x05 - Right Front attenuation */
/* Subaddress 0x06 - Right Rear  attenuation */

/* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB
 * in 1.5dB steps.
 *
 * 0x00 is     0dB
 * 0x1f is -37.5dB
 *
 * Bit 5 mutes that channel when set (1 = mute, 0 = unmute)
 * We'll use the mute on the input, though (above)
 * Bits 6,7 unused
 */

#define TDA7432_ATTEN_0DB       0x00
#define TDA7432_MUTE        0x1 << 5


/* Subaddress 0x07 - Loudness Control */

/* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps
 * when bit 4 is NOT set
 *
 * 0x0 is   0dB
 * 0xf is -15dB
 *
 * If bit 4 is set, then there is a flat attenuation according to
 * the lower 4 bits, as above.
 *
 * Bits 5,6,7 unused
 */



/* Begin code */

static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val)
{
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        unsigned char buffer[2];

        v4l2_dbg(2, debug, sd, "In tda7432_write\n");
        v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val);
        buffer[0] = subaddr;
        buffer[1] = val;
        if (2 != i2c_master_send(client, buffer, 2)) {
                v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n",
                       subaddr, val);
                return -1;
        }
        return 0;
}

static int tda7432_set(struct v4l2_subdev *sd)
{
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        struct tda7432 *t = to_state(sd);
        unsigned char buf[16];

        v4l2_dbg(1, debug, sd,
                "tda7432: 7432_set(0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x)\n",
                t->input, t->volume, t->bass, t->treble, t->lf, t->lr,
                t->rf, t->rr, t->loud);
        buf[0]  = TDA7432_IN;
        buf[1]  = t->input;
        buf[2]  = t->volume;
        buf[3]  = t->bass;
        buf[4]  = t->treble;
        buf[5]  = t->lf;
        buf[6]  = t->lr;
        buf[7]  = t->rf;
        buf[8]  = t->rr;
        buf[9]  = t->loud;
        if (10 != i2c_master_send(client, buf, 10)) {
                v4l2_err(sd, "I/O error, trying tda7432_set\n");
                return -1;
        }

        return 0;
}

static void do_tda7432_init(struct v4l2_subdev *sd)
{
        struct tda7432 *t = to_state(sd);

        v4l2_dbg(2, debug, sd, "In tda7432_init\n");

        t->input  = TDA7432_STEREO_IN |  /* Main (stereo) input   */
                    TDA7432_BASS_SYM  |  /* Symmetric bass cut    */
                    TDA7432_BASS_NORM;   /* Normal bass range     */
        t->volume =  0x3b ;                              /* -27dB Volume            */
        if (loudness)                    /* Turn loudness on?     */
                t->volume |= TDA7432_LD_ON;
        t->muted    = 1;
        t->treble   = TDA7432_TREBLE_0DB; /* 0dB Treble            */
        t->bass         = TDA7432_BASS_0DB;      /* 0dB Bass              */
        t->lf     = TDA7432_ATTEN_0DB;   /* 0dB attenuation       */
        t->lr     = TDA7432_ATTEN_0DB;   /* 0dB attenuation       */
        t->rf     = TDA7432_ATTEN_0DB;   /* 0dB attenuation       */
        t->rr     = TDA7432_ATTEN_0DB;   /* 0dB attenuation       */
        t->loud   = loudness;            /* insmod parameter      */

        tda7432_set(sd);
}

static int tda7432_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
        struct tda7432 *t = to_state(sd);

        switch (ctrl->id) {
        case V4L2_CID_AUDIO_MUTE:
                ctrl->value=t->muted;
                return 0;
        case V4L2_CID_AUDIO_VOLUME:
                if (!maxvol){  /* max +20db */
                        ctrl->value = ( 0x6f - (t->volume & 0x7F) ) * 630;
                } else {       /* max 0db   */
                        ctrl->value = ( 0x6f - (t->volume & 0x7F) ) * 829;
                }
                return 0;
        case V4L2_CID_AUDIO_BALANCE:
        {
                if ( (t->lf) < (t->rf) )
                        /* right is attenuated, balance shifted left */
                        ctrl->value = (32768 - 1057*(t->rf));
                else
                        /* left is attenuated, balance shifted right */
                        ctrl->value = (32768 + 1057*(t->lf));
                return 0;
        }
        case V4L2_CID_AUDIO_BASS:
        {
                /* Bass/treble 4 bits each */
                int bass=t->bass;
                if(bass >= 0x8)
                        bass = ~(bass - 0x8) & 0xf;
                ctrl->value = (bass << 12)+(bass << 8)+(bass << 4)+(bass);
                return 0;
        }
        case V4L2_CID_AUDIO_TREBLE:
        {
                int treble=t->treble;
                if(treble >= 0x8)
                        treble = ~(treble - 0x8) & 0xf;
                ctrl->value = (treble << 12)+(treble << 8)+(treble << 4)+(treble);
                return 0;
        }
        }
        return -EINVAL;
}

static int tda7432_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
        struct tda7432 *t = to_state(sd);

        switch (ctrl->id) {
        case V4L2_CID_AUDIO_MUTE:
                t->muted=ctrl->value;
                break;
        case V4L2_CID_AUDIO_VOLUME:
                if(!maxvol){ /* max +20db */
                        t->volume = 0x6f - ((ctrl->value)/630);
                } else {    /* max 0db   */
                        t->volume = 0x6f - ((ctrl->value)/829);
                }
                if (loudness)           /* Turn on the loudness bit */
                        t->volume |= TDA7432_LD_ON;

                tda7432_write(sd, TDA7432_VL, t->volume);
                return 0;
        case V4L2_CID_AUDIO_BALANCE:
                if (ctrl->value < 32768) {
                        /* shifted to left, attenuate right */
                        t->rr = (32768 - ctrl->value)/1057;
                        t->rf = t->rr;
                        t->lr = TDA7432_ATTEN_0DB;
                        t->lf = TDA7432_ATTEN_0DB;
                } else if(ctrl->value > 32769) {
                        /* shifted to right, attenuate left */
                        t->lf = (ctrl->value - 32768)/1057;
                        t->lr = t->lf;
                        t->rr = TDA7432_ATTEN_0DB;
                        t->rf = TDA7432_ATTEN_0DB;
                } else {
                        /* centered */
                        t->rr = TDA7432_ATTEN_0DB;
                        t->rf = TDA7432_ATTEN_0DB;
                        t->lf = TDA7432_ATTEN_0DB;
                        t->lr = TDA7432_ATTEN_0DB;
                }
                break;
        case V4L2_CID_AUDIO_BASS:
                t->bass = ctrl->value >> 12;
                if(t->bass>= 0x8)
                                t->bass = (~t->bass & 0xf) + 0x8 ;

                tda7432_write(sd, TDA7432_TN, 0x10 | (t->bass << 4) | t->treble);
                return 0;
        case V4L2_CID_AUDIO_TREBLE:
                t->treble= ctrl->value >> 12;
                if(t->treble>= 0x8)
                                t->treble = (~t->treble & 0xf) + 0x8 ;

                tda7432_write(sd, TDA7432_TN, 0x10 | (t->bass << 4) | t->treble);
                return 0;
        default:
                return -EINVAL;
        }

        /* Used for both mute and balance changes */
        if (t->muted)
        {
                /* Mute & update balance*/
                tda7432_write(sd, TDA7432_LF, t->lf | TDA7432_MUTE);
                tda7432_write(sd, TDA7432_LR, t->lr | TDA7432_MUTE);
                tda7432_write(sd, TDA7432_RF, t->rf | TDA7432_MUTE);
                tda7432_write(sd, TDA7432_RR, t->rr | TDA7432_MUTE);
        } else {
                tda7432_write(sd, TDA7432_LF, t->lf);
                tda7432_write(sd, TDA7432_LR, t->lr);
                tda7432_write(sd, TDA7432_RF, t->rf);
                tda7432_write(sd, TDA7432_RR, t->rr);
        }
        return 0;
}

static int tda7432_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
{
        switch (qc->id) {
        case V4L2_CID_AUDIO_VOLUME:
                return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880);
        case V4L2_CID_AUDIO_MUTE:
                return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
        case V4L2_CID_AUDIO_BALANCE:
        case V4L2_CID_AUDIO_BASS:
        case V4L2_CID_AUDIO_TREBLE:
                return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
        }
        return -EINVAL;
}

/* ----------------------------------------------------------------------- */

static const struct v4l2_subdev_core_ops tda7432_core_ops = {
        .queryctrl = tda7432_queryctrl,
        .g_ctrl = tda7432_g_ctrl,
        .s_ctrl = tda7432_s_ctrl,
};

static const struct v4l2_subdev_ops tda7432_ops = {
        .core = &tda7432_core_ops,
};

/* ----------------------------------------------------------------------- */

/* *********************** *
 * i2c interface functions *
 * *********************** */

static int tda7432_probe(struct i2c_client *client,
                        const struct i2c_device_id *id)
{
        struct tda7432 *t;
        struct v4l2_subdev *sd;

        v4l_info(client, "chip found @ 0x%02x (%s)\n",
                        client->addr << 1, client->adapter->name);

        t = kzalloc(sizeof(*t), GFP_KERNEL);
        if (!t)
                return -ENOMEM;
        sd = &t->sd;
        v4l2_i2c_subdev_init(sd, client, &tda7432_ops);
        if (loudness < 0 || loudness > 15) {
                v4l2_warn(sd, "loudness parameter must be between 0 and 15\n");
                if (loudness < 0)
                        loudness = 0;
                if (loudness > 15)
                        loudness = 15;
        }

        do_tda7432_init(sd);
        return 0;
}

static int tda7432_remove(struct i2c_client *client)
{
        struct v4l2_subdev *sd = i2c_get_clientdata(client);

        do_tda7432_init(sd);
        v4l2_device_unregister_subdev(sd);
        kfree(to_state(sd));
        return 0;
}

static const struct i2c_device_id tda7432_id[] = {
        { "tda7432", 0 },
        { }
};
MODULE_DEVICE_TABLE(i2c, tda7432_id);

static struct v4l2_i2c_driver_data v4l2_i2c_data = {
        .name = "tda7432",
        .probe = tda7432_probe,
        .remove = tda7432_remove,
        .id_table = tda7432_id,
};