linux/drivers/net/arm/ether1.c
<<
>>
Prefs
   1/*
   2 *  linux/drivers/acorn/net/ether1.c
   3 *
   4 *  Copyright (C) 1996-2000 Russell King
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License version 2 as
   8 * published by the Free Software Foundation.
   9 *
  10 *  Acorn ether1 driver (82586 chip) for Acorn machines
  11 *
  12 * We basically keep two queues in the cards memory - one for transmit
  13 * and one for receive.  Each has a head and a tail.  The head is where
  14 * we/the chip adds packets to be transmitted/received, and the tail
  15 * is where the transmitter has got to/where the receiver will stop.
  16 * Both of these queues are circular, and since the chip is running
  17 * all the time, we have to be careful when we modify the pointers etc
  18 * so that the buffer memory contents is valid all the time.
  19 *
  20 * Change log:
  21 * 1.00 RMK                     Released
  22 * 1.01 RMK     19/03/1996      Transfers the last odd byte onto/off of the card now.
  23 * 1.02 RMK     25/05/1997      Added code to restart RU if it goes not ready
  24 * 1.03 RMK     14/09/1997      Cleaned up the handling of a reset during the TX interrupt.
  25 *                              Should prevent lockup.
  26 * 1.04 RMK     17/09/1997      Added more info when initialsation of chip goes wrong.
  27 *                              TDR now only reports failure when chip reports non-zero
  28 *                              TDR time-distance.
  29 * 1.05 RMK     31/12/1997      Removed calls to dev_tint for 2.1
  30 * 1.06 RMK     10/02/2000      Updated for 2.3.43
  31 * 1.07 RMK     13/05/2000      Updated for 2.3.99-pre8
  32 */
  33
  34#include <linux/module.h>
  35#include <linux/kernel.h>
  36#include <linux/types.h>
  37#include <linux/fcntl.h>
  38#include <linux/interrupt.h>
  39#include <linux/ioport.h>
  40#include <linux/in.h>
  41#include <linux/slab.h>
  42#include <linux/string.h>
  43#include <linux/errno.h>
  44#include <linux/device.h>
  45#include <linux/init.h>
  46#include <linux/netdevice.h>
  47#include <linux/etherdevice.h>
  48#include <linux/skbuff.h>
  49#include <linux/bitops.h>
  50
  51#include <asm/system.h>
  52#include <asm/io.h>
  53#include <asm/dma.h>
  54#include <asm/ecard.h>
  55
  56#define __ETHER1_C
  57#include "ether1.h"
  58
  59static unsigned int net_debug = NET_DEBUG;
  60
  61#define BUFFER_SIZE     0x10000
  62#define TX_AREA_START   0x00100
  63#define TX_AREA_END     0x05000
  64#define RX_AREA_START   0x05000
  65#define RX_AREA_END     0x0fc00
  66
  67static int ether1_open(struct net_device *dev);
  68static int ether1_sendpacket(struct sk_buff *skb, struct net_device *dev);
  69static irqreturn_t ether1_interrupt(int irq, void *dev_id);
  70static int ether1_close(struct net_device *dev);
  71static struct net_device_stats *ether1_getstats(struct net_device *dev);
  72static void ether1_setmulticastlist(struct net_device *dev);
  73static void ether1_timeout(struct net_device *dev);
  74
  75/* ------------------------------------------------------------------------- */
  76
  77static char version[] __devinitdata = "ether1 ethernet driver (c) 2000 Russell King v1.07\n";
  78
  79#define BUS_16 16
  80#define BUS_8  8
  81
  82/* ------------------------------------------------------------------------- */
  83
  84#define DISABLEIRQS 1
  85#define NORMALIRQS  0
  86
  87#define ether1_readw(dev, addr, type, offset, svflgs) ether1_inw_p (dev, addr + (int)(&((type *)0)->offset), svflgs)
  88#define ether1_writew(dev, val, addr, type, offset, svflgs) ether1_outw_p (dev, val, addr + (int)(&((type *)0)->offset), svflgs)
  89
  90static inline unsigned short
  91ether1_inw_p (struct net_device *dev, int addr, int svflgs)
  92{
  93        unsigned long flags;
  94        unsigned short ret;
  95
  96        if (svflgs)
  97                local_irq_save (flags);
  98
  99        writeb(addr >> 12, REG_PAGE);
 100        ret = readw(ETHER1_RAM + ((addr & 4095) << 1));
 101        if (svflgs)
 102                local_irq_restore (flags);
 103        return ret;
 104}
 105
 106static inline void
 107ether1_outw_p (struct net_device *dev, unsigned short val, int addr, int svflgs)
 108{
 109        unsigned long flags;
 110
 111        if (svflgs)
 112                local_irq_save (flags);
 113
 114        writeb(addr >> 12, REG_PAGE);
 115        writew(val, ETHER1_RAM + ((addr & 4095) << 1));
 116        if (svflgs)
 117                local_irq_restore (flags);
 118}
 119
 120/*
 121 * Some inline assembler to allow fast transfers on to/off of the card.
 122 * Since this driver depends on some features presented by the ARM
 123 * specific architecture, and that you can't configure this driver
 124 * without specifiing ARM mode, this is not a problem.
 125 *
 126 * This routine is essentially an optimised memcpy from the card's
 127 * onboard RAM to kernel memory.
 128 */
 129static void
 130ether1_writebuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length)
 131{
 132        unsigned int page, thislen, offset;
 133        void __iomem *addr;
 134
 135        offset = start & 4095;
 136        page = start >> 12;
 137        addr = ETHER1_RAM + (offset << 1);
 138
 139        if (offset + length > 4096)
 140                thislen = 4096 - offset;
 141        else
 142                thislen = length;
 143
 144        do {
 145                int used;
 146
 147                writeb(page, REG_PAGE);
 148                length -= thislen;
 149
 150                __asm__ __volatile__(
 151        "subs   %3, %3, #2\n\
 152        bmi     2f\n\
 1531:      ldr     %0, [%1], #2\n\
 154        mov     %0, %0, lsl #16\n\
 155        orr     %0, %0, %0, lsr #16\n\
 156        str     %0, [%2], #4\n\
 157        subs    %3, %3, #2\n\
 158        bmi     2f\n\
 159        ldr     %0, [%1], #2\n\
 160        mov     %0, %0, lsl #16\n\
 161        orr     %0, %0, %0, lsr #16\n\
 162        str     %0, [%2], #4\n\
 163        subs    %3, %3, #2\n\
 164        bmi     2f\n\
 165        ldr     %0, [%1], #2\n\
 166        mov     %0, %0, lsl #16\n\
 167        orr     %0, %0, %0, lsr #16\n\
 168        str     %0, [%2], #4\n\
 169        subs    %3, %3, #2\n\
 170        bmi     2f\n\
 171        ldr     %0, [%1], #2\n\
 172        mov     %0, %0, lsl #16\n\
 173        orr     %0, %0, %0, lsr #16\n\
 174        str     %0, [%2], #4\n\
 175        subs    %3, %3, #2\n\
 176        bpl     1b\n\
 1772:      adds    %3, %3, #1\n\
 178        ldreqb  %0, [%1]\n\
 179        streqb  %0, [%2]"
 180                : "=&r" (used), "=&r" (data)
 181                : "r"  (addr), "r" (thislen), "1" (data));
 182
 183                addr = ETHER1_RAM;
 184
 185                thislen = length;
 186                if (thislen > 4096)
 187                        thislen = 4096;
 188                page++;
 189        } while (thislen);
 190}
 191
 192static void
 193ether1_readbuffer (struct net_device *dev, void *data, unsigned int start, unsigned int length)
 194{
 195        unsigned int page, thislen, offset;
 196        void __iomem *addr;
 197
 198        offset = start & 4095;
 199        page = start >> 12;
 200        addr = ETHER1_RAM + (offset << 1);
 201
 202        if (offset + length > 4096)
 203                thislen = 4096 - offset;
 204        else
 205                thislen = length;
 206
 207        do {
 208                int used;
 209
 210                writeb(page, REG_PAGE);
 211                length -= thislen;
 212
 213                __asm__ __volatile__(
 214        "subs   %3, %3, #2\n\
 215        bmi     2f\n\
 2161:      ldr     %0, [%2], #4\n\
 217        strb    %0, [%1], #1\n\
 218        mov     %0, %0, lsr #8\n\
 219        strb    %0, [%1], #1\n\
 220        subs    %3, %3, #2\n\
 221        bmi     2f\n\
 222        ldr     %0, [%2], #4\n\
 223        strb    %0, [%1], #1\n\
 224        mov     %0, %0, lsr #8\n\
 225        strb    %0, [%1], #1\n\
 226        subs    %3, %3, #2\n\
 227        bmi     2f\n\
 228        ldr     %0, [%2], #4\n\
 229        strb    %0, [%1], #1\n\
 230        mov     %0, %0, lsr #8\n\
 231        strb    %0, [%1], #1\n\
 232        subs    %3, %3, #2\n\
 233        bmi     2f\n\
 234        ldr     %0, [%2], #4\n\
 235        strb    %0, [%1], #1\n\
 236        mov     %0, %0, lsr #8\n\
 237        strb    %0, [%1], #1\n\
 238        subs    %3, %3, #2\n\
 239        bpl     1b\n\
 2402:      adds    %3, %3, #1\n\
 241        ldreqb  %0, [%2]\n\
 242        streqb  %0, [%1]"
 243                : "=&r" (used), "=&r" (data)
 244                : "r"  (addr), "r" (thislen), "1" (data));
 245
 246                addr = ETHER1_RAM;
 247
 248                thislen = length;
 249                if (thislen > 4096)
 250                        thislen = 4096;
 251                page++;
 252        } while (thislen);
 253}
 254
 255static int __devinit
 256ether1_ramtest(struct net_device *dev, unsigned char byte)
 257{
 258        unsigned char *buffer = kmalloc (BUFFER_SIZE, GFP_KERNEL);
 259        int i, ret = BUFFER_SIZE;
 260        int max_errors = 15;
 261        int bad = -1;
 262        int bad_start = 0;
 263
 264        if (!buffer)
 265                return 1;
 266
 267        memset (buffer, byte, BUFFER_SIZE);
 268        ether1_writebuffer (dev, buffer, 0, BUFFER_SIZE);
 269        memset (buffer, byte ^ 0xff, BUFFER_SIZE);
 270        ether1_readbuffer (dev, buffer, 0, BUFFER_SIZE);
 271
 272        for (i = 0; i < BUFFER_SIZE; i++) {
 273                if (buffer[i] != byte) {
 274                        if (max_errors >= 0 && bad != buffer[i]) {
 275                                if (bad != -1)
 276                                        printk ("\n");
 277                                printk (KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X",
 278                                        dev->name, buffer[i], byte, i);
 279                                ret = -ENODEV;
 280                                max_errors --;
 281                                bad = buffer[i];
 282                                bad_start = i;
 283                        }
 284                } else {
 285                        if (bad != -1) {
 286                                if (bad_start == i - 1)
 287                                        printk ("\n");
 288                                else
 289                                        printk (" - 0x%04X\n", i - 1);
 290                                bad = -1;
 291                        }
 292                }
 293        }
 294
 295        if (bad != -1)
 296                printk (" - 0x%04X\n", BUFFER_SIZE);
 297        kfree (buffer);
 298
 299        return ret;
 300}
 301
 302static int
 303ether1_reset (struct net_device *dev)
 304{
 305        writeb(CTRL_RST|CTRL_ACK, REG_CONTROL);
 306        return BUS_16;
 307}
 308
 309static int __devinit
 310ether1_init_2(struct net_device *dev)
 311{
 312        int i;
 313        dev->mem_start = 0;
 314
 315        i = ether1_ramtest (dev, 0x5a);
 316
 317        if (i > 0)
 318                i = ether1_ramtest (dev, 0x1e);
 319
 320        if (i <= 0)
 321                return -ENODEV;
 322
 323        dev->mem_end = i;
 324        return 0;
 325}
 326
 327/*
 328 * These are the structures that are loaded into the ether RAM card to
 329 * initialise the 82586
 330 */
 331
 332/* at 0x0100 */
 333#define NOP_ADDR        (TX_AREA_START)
 334#define NOP_SIZE        (0x06)
 335static nop_t  init_nop  = {
 336        0,
 337        CMD_NOP,
 338        NOP_ADDR
 339};
 340
 341/* at 0x003a */
 342#define TDR_ADDR        (0x003a)
 343#define TDR_SIZE        (0x08)
 344static tdr_t  init_tdr  = {
 345        0,
 346        CMD_TDR | CMD_INTR,
 347        NOP_ADDR,
 348        0
 349};
 350
 351/* at 0x002e */
 352#define MC_ADDR         (0x002e)
 353#define MC_SIZE         (0x0c)
 354static mc_t   init_mc   = {
 355        0,
 356        CMD_SETMULTICAST,
 357        TDR_ADDR,
 358        0,
 359        { { 0, } }
 360};
 361
 362/* at 0x0022 */
 363#define SA_ADDR         (0x0022)
 364#define SA_SIZE         (0x0c)
 365static sa_t   init_sa   = {
 366        0,
 367        CMD_SETADDRESS,
 368        MC_ADDR,
 369        { 0, }
 370};
 371
 372/* at 0x0010 */
 373#define CFG_ADDR        (0x0010)
 374#define CFG_SIZE        (0x12)
 375static cfg_t  init_cfg  = {
 376        0,
 377        CMD_CONFIG,
 378        SA_ADDR,
 379        8,
 380        8,
 381        CFG8_SRDY,
 382        CFG9_PREAMB8 | CFG9_ADDRLENBUF | CFG9_ADDRLEN(6),
 383        0,
 384        0x60,
 385        0,
 386        CFG13_RETRY(15) | CFG13_SLOTH(2),
 387        0,
 388};
 389
 390/* at 0x0000 */
 391#define SCB_ADDR        (0x0000)
 392#define SCB_SIZE        (0x10)
 393static scb_t  init_scb  = {
 394        0,
 395        SCB_CMDACKRNR | SCB_CMDACKCNA | SCB_CMDACKFR | SCB_CMDACKCX,
 396        CFG_ADDR,
 397        RX_AREA_START,
 398        0,
 399        0,
 400        0,
 401        0
 402};
 403
 404/* at 0xffee */
 405#define ISCP_ADDR       (0xffee)
 406#define ISCP_SIZE       (0x08)
 407static iscp_t init_iscp = {
 408        1,
 409        SCB_ADDR,
 410        0x0000,
 411        0x0000
 412};
 413
 414/* at 0xfff6 */
 415#define SCP_ADDR        (0xfff6)
 416#define SCP_SIZE        (0x0a)
 417static scp_t  init_scp  = {
 418        SCP_SY_16BBUS,
 419        { 0, 0 },
 420        ISCP_ADDR,
 421        0
 422};
 423
 424#define RFD_SIZE        (0x16)
 425static rfd_t  init_rfd  = {
 426        0,
 427        0,
 428        0,
 429        0,
 430        { 0, },
 431        { 0, },
 432        0
 433};
 434
 435#define RBD_SIZE        (0x0a)
 436static rbd_t  init_rbd  = {
 437        0,
 438        0,
 439        0,
 440        0,
 441        ETH_FRAME_LEN + 8
 442};
 443
 444#define TX_SIZE         (0x08)
 445#define TBD_SIZE        (0x08)
 446
 447static int
 448ether1_init_for_open (struct net_device *dev)
 449{
 450        int i, status, addr, next, next2;
 451        int failures = 0;
 452        unsigned long timeout;
 453
 454        writeb(CTRL_RST|CTRL_ACK, REG_CONTROL);
 455
 456        for (i = 0; i < 6; i++)
 457                init_sa.sa_addr[i] = dev->dev_addr[i];
 458
 459        /* load data structures into ether1 RAM */
 460        ether1_writebuffer (dev, &init_scp,  SCP_ADDR,  SCP_SIZE);
 461        ether1_writebuffer (dev, &init_iscp, ISCP_ADDR, ISCP_SIZE);
 462        ether1_writebuffer (dev, &init_scb,  SCB_ADDR,  SCB_SIZE);
 463        ether1_writebuffer (dev, &init_cfg,  CFG_ADDR,  CFG_SIZE);
 464        ether1_writebuffer (dev, &init_sa,   SA_ADDR,   SA_SIZE);
 465        ether1_writebuffer (dev, &init_mc,   MC_ADDR,   MC_SIZE);
 466        ether1_writebuffer (dev, &init_tdr,  TDR_ADDR,  TDR_SIZE);
 467        ether1_writebuffer (dev, &init_nop,  NOP_ADDR,  NOP_SIZE);
 468
 469        if (ether1_readw(dev, CFG_ADDR, cfg_t, cfg_command, NORMALIRQS) != CMD_CONFIG) {
 470                printk (KERN_ERR "%s: detected either RAM fault or compiler bug\n",
 471                        dev->name);
 472                return 1;
 473        }
 474
 475        /*
 476         * setup circularly linked list of { rfd, rbd, buffer }, with
 477         * all rfds circularly linked, rbds circularly linked.
 478         * First rfd is linked to scp, first rbd is linked to first
 479         * rfd.  Last rbd has a suspend command.
 480         */
 481        addr = RX_AREA_START;
 482        do {
 483                next = addr + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10;
 484                next2 = next + RFD_SIZE + RBD_SIZE + ETH_FRAME_LEN + 10;
 485
 486                if (next2 >= RX_AREA_END) {
 487                        next = RX_AREA_START;
 488                        init_rfd.rfd_command = RFD_CMDEL | RFD_CMDSUSPEND;
 489                        priv(dev)->rx_tail = addr;
 490                } else
 491                        init_rfd.rfd_command = 0;
 492                if (addr == RX_AREA_START)
 493                        init_rfd.rfd_rbdoffset = addr + RFD_SIZE;
 494                else
 495                        init_rfd.rfd_rbdoffset = 0;
 496                init_rfd.rfd_link = next;
 497                init_rbd.rbd_link = next + RFD_SIZE;
 498                init_rbd.rbd_bufl = addr + RFD_SIZE + RBD_SIZE;
 499
 500                ether1_writebuffer (dev, &init_rfd, addr, RFD_SIZE);
 501                ether1_writebuffer (dev, &init_rbd, addr + RFD_SIZE, RBD_SIZE);
 502                addr = next;
 503        } while (next2 < RX_AREA_END);
 504
 505        priv(dev)->tx_link = NOP_ADDR;
 506        priv(dev)->tx_head = NOP_ADDR + NOP_SIZE;
 507        priv(dev)->tx_tail = TDR_ADDR;
 508        priv(dev)->rx_head = RX_AREA_START;
 509
 510        /* release reset & give 586 a prod */
 511        priv(dev)->resetting = 1;
 512        priv(dev)->initialising = 1;
 513        writeb(CTRL_RST, REG_CONTROL);
 514        writeb(0, REG_CONTROL);
 515        writeb(CTRL_CA, REG_CONTROL);
 516
 517        /* 586 should now unset iscp.busy */
 518        timeout = jiffies + HZ/2;
 519        while (ether1_readw(dev, ISCP_ADDR, iscp_t, iscp_busy, DISABLEIRQS) == 1) {
 520                if (time_after(jiffies, timeout)) {
 521                        printk (KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name);
 522                        return 1;
 523                }
 524        }
 525
 526        /* check status of commands that we issued */
 527        timeout += HZ/10;
 528        while (((status = ether1_readw(dev, CFG_ADDR, cfg_t, cfg_status, DISABLEIRQS))
 529                        & STAT_COMPLETE) == 0) {
 530                if (time_after(jiffies, timeout))
 531                        break;
 532        }
 533
 534        if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
 535                printk (KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status);
 536                printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
 537                        ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
 538                        ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
 539                        ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
 540                        ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
 541                failures += 1;
 542        }
 543
 544        timeout += HZ/10;
 545        while (((status = ether1_readw(dev, SA_ADDR, sa_t, sa_status, DISABLEIRQS))
 546                        & STAT_COMPLETE) == 0) {
 547                if (time_after(jiffies, timeout))
 548                        break;
 549        }
 550
 551        if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
 552                printk (KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status);
 553                printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
 554                        ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
 555                        ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
 556                        ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
 557                        ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
 558                failures += 1;
 559        }
 560
 561        timeout += HZ/10;
 562        while (((status = ether1_readw(dev, MC_ADDR, mc_t, mc_status, DISABLEIRQS))
 563                        & STAT_COMPLETE) == 0) {
 564                if (time_after(jiffies, timeout))
 565                        break;
 566        }
 567
 568        if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
 569                printk (KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status);
 570                printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
 571                        ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
 572                        ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
 573                        ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
 574                        ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
 575                failures += 1;
 576        }
 577
 578        timeout += HZ;
 579        while (((status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_status, DISABLEIRQS))
 580                        & STAT_COMPLETE) == 0) {
 581                if (time_after(jiffies, timeout))
 582                        break;
 583        }
 584
 585        if ((status & (STAT_COMPLETE | STAT_OK)) != (STAT_COMPLETE | STAT_OK)) {
 586                printk (KERN_WARNING "%s: can't tdr (ignored)\n", dev->name);
 587                printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
 588                        ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS),
 589                        ether1_readw(dev, SCB_ADDR, scb_t, scb_command, NORMALIRQS),
 590                        ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS),
 591                        ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset, NORMALIRQS));
 592        } else {
 593                status = ether1_readw(dev, TDR_ADDR, tdr_t, tdr_result, DISABLEIRQS);
 594                if (status & TDR_XCVRPROB)
 595                        printk (KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name);
 596                else if ((status & (TDR_SHORT|TDR_OPEN)) && (status & TDR_TIME)) {
 597#ifdef FANCY
 598                        printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name,
 599                                status & TDR_SHORT ? "short" : "open", (status & TDR_TIME) / 10,
 600                                (status & TDR_TIME) % 10);
 601#else
 602                        printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name,
 603                                status & TDR_SHORT ? "short" : "open", (status & TDR_TIME));
 604#endif
 605                }
 606        }
 607
 608        if (failures)
 609                ether1_reset (dev);
 610        return failures ? 1 : 0;
 611}
 612
 613/* ------------------------------------------------------------------------- */
 614
 615static int
 616ether1_txalloc (struct net_device *dev, int size)
 617{
 618        int start, tail;
 619
 620        size = (size + 1) & ~1;
 621        tail = priv(dev)->tx_tail;
 622
 623        if (priv(dev)->tx_head + size > TX_AREA_END) {
 624                if (tail > priv(dev)->tx_head)
 625                        return -1;
 626                start = TX_AREA_START;
 627                if (start + size > tail)
 628                        return -1;
 629                priv(dev)->tx_head = start + size;
 630        } else {
 631                if (priv(dev)->tx_head < tail && (priv(dev)->tx_head + size) > tail)
 632                        return -1;
 633                start = priv(dev)->tx_head;
 634                priv(dev)->tx_head += size;
 635        }
 636
 637        return start;
 638}
 639
 640static int
 641ether1_open (struct net_device *dev)
 642{
 643        if (!is_valid_ether_addr(dev->dev_addr)) {
 644                printk(KERN_WARNING "%s: invalid ethernet MAC address\n",
 645                        dev->name);
 646                return -EINVAL;
 647        }
 648
 649        if (request_irq(dev->irq, ether1_interrupt, 0, "ether1", dev))
 650                return -EAGAIN;
 651
 652        memset (&priv(dev)->stats, 0, sizeof (struct net_device_stats));
 653
 654        if (ether1_init_for_open (dev)) {
 655                free_irq (dev->irq, dev);
 656                return -EAGAIN;
 657        }
 658
 659        netif_start_queue(dev);
 660
 661        return 0;
 662}
 663
 664static void
 665ether1_timeout(struct net_device *dev)
 666{
 667        printk(KERN_WARNING "%s: transmit timeout, network cable problem?\n",
 668                dev->name);
 669        printk(KERN_WARNING "%s: resetting device\n", dev->name);
 670
 671        ether1_reset (dev);
 672
 673        if (ether1_init_for_open (dev))
 674                printk (KERN_ERR "%s: unable to restart interface\n", dev->name);
 675
 676        priv(dev)->stats.tx_errors++;
 677        netif_wake_queue(dev);
 678}
 679
 680static int
 681ether1_sendpacket (struct sk_buff *skb, struct net_device *dev)
 682{
 683        int tmp, tst, nopaddr, txaddr, tbdaddr, dataddr;
 684        unsigned long flags;
 685        tx_t tx;
 686        tbd_t tbd;
 687        nop_t nop;
 688
 689        if (priv(dev)->restart) {
 690                printk(KERN_WARNING "%s: resetting device\n", dev->name);
 691
 692                ether1_reset(dev);
 693
 694                if (ether1_init_for_open(dev))
 695                        printk(KERN_ERR "%s: unable to restart interface\n", dev->name);
 696                else
 697                        priv(dev)->restart = 0;
 698        }
 699
 700        if (skb->len < ETH_ZLEN) {
 701                if (skb_padto(skb, ETH_ZLEN))
 702                        goto out;
 703        }
 704
 705        /*
 706         * insert packet followed by a nop
 707         */
 708        txaddr = ether1_txalloc (dev, TX_SIZE);
 709        tbdaddr = ether1_txalloc (dev, TBD_SIZE);
 710        dataddr = ether1_txalloc (dev, skb->len);
 711        nopaddr = ether1_txalloc (dev, NOP_SIZE);
 712
 713        tx.tx_status = 0;
 714        tx.tx_command = CMD_TX | CMD_INTR;
 715        tx.tx_link = nopaddr;
 716        tx.tx_tbdoffset = tbdaddr;
 717        tbd.tbd_opts = TBD_EOL | skb->len;
 718        tbd.tbd_link = I82586_NULL;
 719        tbd.tbd_bufl = dataddr;
 720        tbd.tbd_bufh = 0;
 721        nop.nop_status = 0;
 722        nop.nop_command = CMD_NOP;
 723        nop.nop_link = nopaddr;
 724
 725        local_irq_save(flags);
 726        ether1_writebuffer (dev, &tx, txaddr, TX_SIZE);
 727        ether1_writebuffer (dev, &tbd, tbdaddr, TBD_SIZE);
 728        ether1_writebuffer (dev, skb->data, dataddr, skb->len);
 729        ether1_writebuffer (dev, &nop, nopaddr, NOP_SIZE);
 730        tmp = priv(dev)->tx_link;
 731        priv(dev)->tx_link = nopaddr;
 732
 733        /* now reset the previous nop pointer */
 734        ether1_writew(dev, txaddr, tmp, nop_t, nop_link, NORMALIRQS);
 735
 736        local_irq_restore(flags);
 737
 738        /* handle transmit */
 739        dev->trans_start = jiffies;
 740
 741        /* check to see if we have room for a full sized ether frame */
 742        tmp = priv(dev)->tx_head;
 743        tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN);
 744        priv(dev)->tx_head = tmp;
 745        dev_kfree_skb (skb);
 746
 747        if (tst == -1)
 748                netif_stop_queue(dev);
 749
 750 out:
 751        return NETDEV_TX_OK;
 752}
 753
 754static void
 755ether1_xmit_done (struct net_device *dev)
 756{
 757        nop_t nop;
 758        int caddr, tst;
 759
 760        caddr = priv(dev)->tx_tail;
 761
 762again:
 763        ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
 764
 765        switch (nop.nop_command & CMD_MASK) {
 766        case CMD_TDR:
 767                /* special case */
 768                if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS)
 769                                != (unsigned short)I82586_NULL) {
 770                        ether1_writew(dev, SCB_CMDCUCSTART | SCB_CMDRXSTART, SCB_ADDR, scb_t,
 771                                    scb_command, NORMALIRQS);
 772                        writeb(CTRL_CA, REG_CONTROL);
 773                }
 774                priv(dev)->tx_tail = NOP_ADDR;
 775                return;
 776
 777        case CMD_NOP:
 778                if (nop.nop_link == caddr) {
 779                        if (priv(dev)->initialising == 0)
 780                                printk (KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name);
 781                        else
 782                                priv(dev)->initialising = 0;
 783                        return;
 784                }
 785                if (caddr == nop.nop_link)
 786                        return;
 787                caddr = nop.nop_link;
 788                goto again;
 789
 790        case CMD_TX:
 791                if (nop.nop_status & STAT_COMPLETE)
 792                        break;
 793                printk (KERN_ERR "%s: strange command complete without completed command\n", dev->name);
 794                priv(dev)->restart = 1;
 795                return;
 796
 797        default:
 798                printk (KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name,
 799                        nop.nop_command & CMD_MASK, caddr);
 800                priv(dev)->restart = 1;
 801                return;
 802        }
 803
 804        while (nop.nop_status & STAT_COMPLETE) {
 805                if (nop.nop_status & STAT_OK) {
 806                        priv(dev)->stats.tx_packets ++;
 807                        priv(dev)->stats.collisions += (nop.nop_status & STAT_COLLISIONS);
 808                } else {
 809                        priv(dev)->stats.tx_errors ++;
 810
 811                        if (nop.nop_status & STAT_COLLAFTERTX)
 812                                priv(dev)->stats.collisions ++;
 813                        if (nop.nop_status & STAT_NOCARRIER)
 814                                priv(dev)->stats.tx_carrier_errors ++;
 815                        if (nop.nop_status & STAT_TXLOSTCTS)
 816                                printk (KERN_WARNING "%s: cts lost\n", dev->name);
 817                        if (nop.nop_status & STAT_TXSLOWDMA)
 818                                priv(dev)->stats.tx_fifo_errors ++;
 819                        if (nop.nop_status & STAT_COLLEXCESSIVE)
 820                                priv(dev)->stats.collisions += 16;
 821                }
 822
 823                if (nop.nop_link == caddr) {
 824                        printk (KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name);
 825                        break;
 826                }
 827
 828                caddr = nop.nop_link;
 829                ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
 830                if ((nop.nop_command & CMD_MASK) != CMD_NOP) {
 831                        printk (KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name);
 832                        break;
 833                }
 834
 835                if (caddr == nop.nop_link)
 836                        break;
 837
 838                caddr = nop.nop_link;
 839                ether1_readbuffer (dev, &nop, caddr, NOP_SIZE);
 840                if ((nop.nop_command & CMD_MASK) != CMD_TX) {
 841                        printk (KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name);
 842                        break;
 843                }
 844        }
 845        priv(dev)->tx_tail = caddr;
 846
 847        caddr = priv(dev)->tx_head;
 848        tst = ether1_txalloc (dev, TX_SIZE + TBD_SIZE + NOP_SIZE + ETH_FRAME_LEN);
 849        priv(dev)->tx_head = caddr;
 850        if (tst != -1)
 851                netif_wake_queue(dev);
 852}
 853
 854static void
 855ether1_recv_done (struct net_device *dev)
 856{
 857        int status;
 858        int nexttail, rbdaddr;
 859        rbd_t rbd;
 860
 861        do {
 862                status = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_status, NORMALIRQS);
 863                if ((status & RFD_COMPLETE) == 0)
 864                        break;
 865
 866                rbdaddr = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_rbdoffset, NORMALIRQS);
 867                ether1_readbuffer (dev, &rbd, rbdaddr, RBD_SIZE);
 868
 869                if ((rbd.rbd_status & (RBD_EOF | RBD_ACNTVALID)) == (RBD_EOF | RBD_ACNTVALID)) {
 870                        int length = rbd.rbd_status & RBD_ACNT;
 871                        struct sk_buff *skb;
 872
 873                        length = (length + 1) & ~1;
 874                        skb = dev_alloc_skb (length + 2);
 875
 876                        if (skb) {
 877                                skb_reserve (skb, 2);
 878
 879                                ether1_readbuffer (dev, skb_put (skb, length), rbd.rbd_bufl, length);
 880
 881                                skb->protocol = eth_type_trans (skb, dev);
 882                                netif_rx (skb);
 883                                priv(dev)->stats.rx_packets ++;
 884                        } else
 885                                priv(dev)->stats.rx_dropped ++;
 886                } else {
 887                        printk(KERN_WARNING "%s: %s\n", dev->name,
 888                                (rbd.rbd_status & RBD_EOF) ? "oversized packet" : "acnt not valid");
 889                        priv(dev)->stats.rx_dropped ++;
 890                }
 891
 892                nexttail = ether1_readw(dev, priv(dev)->rx_tail, rfd_t, rfd_link, NORMALIRQS);
 893                /* nexttail should be rx_head */
 894                if (nexttail != priv(dev)->rx_head)
 895                        printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n",
 896                                dev->name, nexttail, priv(dev)->rx_head);
 897                ether1_writew(dev, RFD_CMDEL | RFD_CMDSUSPEND, nexttail, rfd_t, rfd_command, NORMALIRQS);
 898                ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_command, NORMALIRQS);
 899                ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_status, NORMALIRQS);
 900                ether1_writew(dev, 0, priv(dev)->rx_tail, rfd_t, rfd_rbdoffset, NORMALIRQS);
 901        
 902                priv(dev)->rx_tail = nexttail;
 903                priv(dev)->rx_head = ether1_readw(dev, priv(dev)->rx_head, rfd_t, rfd_link, NORMALIRQS);
 904        } while (1);
 905}
 906
 907static irqreturn_t
 908ether1_interrupt (int irq, void *dev_id)
 909{
 910        struct net_device *dev = (struct net_device *)dev_id;
 911        int status;
 912
 913        status = ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS);
 914
 915        if (status) {
 916                ether1_writew(dev, status & (SCB_STRNR | SCB_STCNA | SCB_STFR | SCB_STCX),
 917                            SCB_ADDR, scb_t, scb_command, NORMALIRQS);
 918                writeb(CTRL_CA | CTRL_ACK, REG_CONTROL);
 919                if (status & SCB_STCX) {
 920                        ether1_xmit_done (dev);
 921                }
 922                if (status & SCB_STCNA) {
 923                        if (priv(dev)->resetting == 0)
 924                                printk (KERN_WARNING "%s: CU went not ready ???\n", dev->name);
 925                        else
 926                                priv(dev)->resetting += 1;
 927                        if (ether1_readw(dev, SCB_ADDR, scb_t, scb_cbl_offset, NORMALIRQS)
 928                                        != (unsigned short)I82586_NULL) {
 929                                ether1_writew(dev, SCB_CMDCUCSTART, SCB_ADDR, scb_t, scb_command, NORMALIRQS);
 930                                writeb(CTRL_CA, REG_CONTROL);
 931                        }
 932                        if (priv(dev)->resetting == 2)
 933                                priv(dev)->resetting = 0;
 934                }
 935                if (status & SCB_STFR) {
 936                        ether1_recv_done (dev);
 937                }
 938                if (status & SCB_STRNR) {
 939                        if (ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS) & SCB_STRXSUSP) {
 940                                printk (KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name);
 941                                ether1_writew(dev, SCB_CMDRXRESUME, SCB_ADDR, scb_t, scb_command, NORMALIRQS);
 942                                writeb(CTRL_CA, REG_CONTROL);
 943                                priv(dev)->stats.rx_dropped ++; /* we suspended due to lack of buffer space */
 944                        } else
 945                                printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name,
 946                                        ether1_readw(dev, SCB_ADDR, scb_t, scb_status, NORMALIRQS));
 947                        printk (KERN_WARNING "RU ptr = %04X\n", ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset,
 948                                                NORMALIRQS));
 949                }
 950        } else
 951                writeb(CTRL_ACK, REG_CONTROL);
 952
 953        return IRQ_HANDLED;
 954}
 955
 956static int
 957ether1_close (struct net_device *dev)
 958{
 959        ether1_reset (dev);
 960
 961        free_irq(dev->irq, dev);
 962
 963        return 0;
 964}
 965
 966static struct net_device_stats *
 967ether1_getstats (struct net_device *dev)
 968{
 969        return &priv(dev)->stats;
 970}
 971
 972/*
 973 * Set or clear the multicast filter for this adaptor.
 974 * num_addrs == -1      Promiscuous mode, receive all packets.
 975 * num_addrs == 0       Normal mode, clear multicast list.
 976 * num_addrs > 0        Multicast mode, receive normal and MC packets, and do
 977 *                      best-effort filtering.
 978 */
 979static void
 980ether1_setmulticastlist (struct net_device *dev)
 981{
 982}
 983
 984/* ------------------------------------------------------------------------- */
 985
 986static void __devinit ether1_banner(void)
 987{
 988        static unsigned int version_printed = 0;
 989
 990        if (net_debug && version_printed++ == 0)
 991                printk(KERN_INFO "%s", version);
 992}
 993
 994static const struct net_device_ops ether1_netdev_ops = {
 995        .ndo_open               = ether1_open,
 996        .ndo_stop               = ether1_close,
 997        .ndo_start_xmit         = ether1_sendpacket,
 998        .ndo_get_stats          = ether1_getstats,
 999        .ndo_set_multicast_list = ether1_setmulticastlist,
1000        .ndo_tx_timeout         = ether1_timeout,
1001        .ndo_validate_addr      = eth_validate_addr,
1002        .ndo_change_mtu         = eth_change_mtu,
1003        .ndo_set_mac_address    = eth_mac_addr,
1004};
1005
1006static int __devinit
1007ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
1008{
1009        struct net_device *dev;
1010        int i, ret = 0;
1011
1012        ether1_banner();
1013
1014        ret = ecard_request_resources(ec);
1015        if (ret)
1016                goto out;
1017
1018        dev = alloc_etherdev(sizeof(struct ether1_priv));
1019        if (!dev) {
1020                ret = -ENOMEM;
1021                goto release;
1022        }
1023
1024        SET_NETDEV_DEV(dev, &ec->dev);
1025
1026        dev->irq = ec->irq;
1027        priv(dev)->base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
1028        if (!priv(dev)->base) {
1029                ret = -ENOMEM;
1030                goto free;
1031        }
1032
1033        if ((priv(dev)->bus_type = ether1_reset(dev)) == 0) {
1034                ret = -ENODEV;
1035                goto free;
1036        }
1037
1038        for (i = 0; i < 6; i++)
1039                dev->dev_addr[i] = readb(IDPROM_ADDRESS + (i << 2));
1040
1041        if (ether1_init_2(dev)) {
1042                ret = -ENODEV;
1043                goto free;
1044        }
1045
1046        dev->netdev_ops         = &ether1_netdev_ops;
1047        dev->watchdog_timeo     = 5 * HZ / 100;
1048
1049        ret = register_netdev(dev);
1050        if (ret)
1051                goto free;
1052
1053        printk(KERN_INFO "%s: ether1 in slot %d, %pM\n",
1054                dev->name, ec->slot_no, dev->dev_addr);
1055    
1056        ecard_set_drvdata(ec, dev);
1057        return 0;
1058
1059 free:
1060        free_netdev(dev);
1061 release:
1062        ecard_release_resources(ec);
1063 out:
1064        return ret;
1065}
1066
1067static void __devexit ether1_remove(struct expansion_card *ec)
1068{
1069        struct net_device *dev = ecard_get_drvdata(ec);
1070
1071        ecard_set_drvdata(ec, NULL);    
1072
1073        unregister_netdev(dev);
1074        free_netdev(dev);
1075        ecard_release_resources(ec);
1076}
1077
1078static const struct ecard_id ether1_ids[] = {
1079        { MANU_ACORN, PROD_ACORN_ETHER1 },
1080        { 0xffff, 0xffff }
1081};
1082
1083static struct ecard_driver ether1_driver = {
1084        .probe          = ether1_probe,
1085        .remove         = __devexit_p(ether1_remove),
1086        .id_table       = ether1_ids,
1087        .drv = {
1088                .name   = "ether1",
1089        },
1090};
1091
1092static int __init ether1_init(void)
1093{
1094        return ecard_register_driver(&ether1_driver);
1095}
1096
1097static void __exit ether1_exit(void)
1098{
1099        ecard_remove_driver(&ether1_driver);
1100}
1101
1102module_init(ether1_init);
1103module_exit(ether1_exit);
1104
1105MODULE_LICENSE("GPL");
1106