linux/drivers/net/cxgb3/mc5.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2003-2008 Chelsio, Inc. All rights reserved.
   3 *
   4 * This software is available to you under a choice of one of two
   5 * licenses.  You may choose to be licensed under the terms of the GNU
   6 * General Public License (GPL) Version 2, available from the file
   7 * COPYING in the main directory of this source tree, or the
   8 * OpenIB.org BSD license below:
   9 *
  10 *     Redistribution and use in source and binary forms, with or
  11 *     without modification, are permitted provided that the following
  12 *     conditions are met:
  13 *
  14 *      - Redistributions of source code must retain the above
  15 *        copyright notice, this list of conditions and the following
  16 *        disclaimer.
  17 *
  18 *      - Redistributions in binary form must reproduce the above
  19 *        copyright notice, this list of conditions and the following
  20 *        disclaimer in the documentation and/or other materials
  21 *        provided with the distribution.
  22 *
  23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30 * SOFTWARE.
  31 */
  32#include "common.h"
  33#include "regs.h"
  34
  35enum {
  36        IDT75P52100 = 4,
  37        IDT75N43102 = 5
  38};
  39
  40/* DBGI command mode */
  41enum {
  42        DBGI_MODE_MBUS = 0,
  43        DBGI_MODE_IDT52100 = 5
  44};
  45
  46/* IDT 75P52100 commands */
  47#define IDT_CMD_READ   0
  48#define IDT_CMD_WRITE  1
  49#define IDT_CMD_SEARCH 2
  50#define IDT_CMD_LEARN  3
  51
  52/* IDT LAR register address and value for 144-bit mode (low 32 bits) */
  53#define IDT_LAR_ADR0    0x180006
  54#define IDT_LAR_MODE144 0xffff0000
  55
  56/* IDT SCR and SSR addresses (low 32 bits) */
  57#define IDT_SCR_ADR0  0x180000
  58#define IDT_SSR0_ADR0 0x180002
  59#define IDT_SSR1_ADR0 0x180004
  60
  61/* IDT GMR base address (low 32 bits) */
  62#define IDT_GMR_BASE_ADR0 0x180020
  63
  64/* IDT data and mask array base addresses (low 32 bits) */
  65#define IDT_DATARY_BASE_ADR0 0
  66#define IDT_MSKARY_BASE_ADR0 0x80000
  67
  68/* IDT 75N43102 commands */
  69#define IDT4_CMD_SEARCH144 3
  70#define IDT4_CMD_WRITE     4
  71#define IDT4_CMD_READ      5
  72
  73/* IDT 75N43102 SCR address (low 32 bits) */
  74#define IDT4_SCR_ADR0  0x3
  75
  76/* IDT 75N43102 GMR base addresses (low 32 bits) */
  77#define IDT4_GMR_BASE0 0x10
  78#define IDT4_GMR_BASE1 0x20
  79#define IDT4_GMR_BASE2 0x30
  80
  81/* IDT 75N43102 data and mask array base addresses (low 32 bits) */
  82#define IDT4_DATARY_BASE_ADR0 0x1000000
  83#define IDT4_MSKARY_BASE_ADR0 0x2000000
  84
  85#define MAX_WRITE_ATTEMPTS 5
  86
  87#define MAX_ROUTES 2048
  88
  89/*
  90 * Issue a command to the TCAM and wait for its completion.  The address and
  91 * any data required by the command must have been setup by the caller.
  92 */
  93static int mc5_cmd_write(struct adapter *adapter, u32 cmd)
  94{
  95        t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd);
  96        return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS,
  97                               F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1);
  98}
  99
 100static inline void dbgi_wr_addr3(struct adapter *adapter, u32 v1, u32 v2,
 101                                 u32 v3)
 102{
 103        t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1);
 104        t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2);
 105        t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3);
 106}
 107
 108static inline void dbgi_wr_data3(struct adapter *adapter, u32 v1, u32 v2,
 109                                 u32 v3)
 110{
 111        t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1);
 112        t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2);
 113        t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3);
 114}
 115
 116static inline void dbgi_rd_rsp3(struct adapter *adapter, u32 *v1, u32 *v2,
 117                                u32 *v3)
 118{
 119        *v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0);
 120        *v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1);
 121        *v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2);
 122}
 123
 124/*
 125 * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM
 126 * command cmd.  The data to be written must have been set up by the caller.
 127 * Returns -1 on failure, 0 on success.
 128 */
 129static int mc5_write(struct adapter *adapter, u32 addr_lo, u32 cmd)
 130{
 131        t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo);
 132        if (mc5_cmd_write(adapter, cmd) == 0)
 133                return 0;
 134        CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n",
 135               addr_lo);
 136        return -1;
 137}
 138
 139static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base,
 140                                u32 data_array_base, u32 write_cmd,
 141                                int addr_shift)
 142{
 143        unsigned int i;
 144        struct adapter *adap = mc5->adapter;
 145
 146        /*
 147         * We need the size of the TCAM data and mask arrays in terms of
 148         * 72-bit entries.
 149         */
 150        unsigned int size72 = mc5->tcam_size;
 151        unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX);
 152
 153        if (mc5->mode == MC5_MODE_144_BIT) {
 154                size72 *= 2;    /* 1 144-bit entry is 2 72-bit entries */
 155                server_base *= 2;
 156        }
 157
 158        /* Clear the data array */
 159        dbgi_wr_data3(adap, 0, 0, 0);
 160        for (i = 0; i < size72; i++)
 161                if (mc5_write(adap, data_array_base + (i << addr_shift),
 162                              write_cmd))
 163                        return -1;
 164
 165        /* Initialize the mask array. */
 166        dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
 167        for (i = 0; i < size72; i++) {
 168                if (i == server_base)   /* entering server or routing region */
 169                        t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0,
 170                                     mc5->mode == MC5_MODE_144_BIT ?
 171                                     0xfffffff9 : 0xfffffffd);
 172                if (mc5_write(adap, mask_array_base + (i << addr_shift),
 173                              write_cmd))
 174                        return -1;
 175        }
 176        return 0;
 177}
 178
 179static int init_idt52100(struct mc5 *mc5)
 180{
 181        int i;
 182        struct adapter *adap = mc5->adapter;
 183
 184        t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
 185                     V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15));
 186        t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2);
 187
 188        /*
 189         * Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and
 190         * GMRs 8-9 for ACK- and AOPEN searches.
 191         */
 192        t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE);
 193        t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE);
 194        t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH);
 195        t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN);
 196        t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000);
 197        t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN);
 198        t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH);
 199        t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN);
 200        t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH);
 201        t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000);
 202        t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE);
 203        t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ);
 204
 205        /* Set DBGI command mode for IDT TCAM. */
 206        t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
 207
 208        /* Set up LAR */
 209        dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0);
 210        if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE))
 211                goto err;
 212
 213        /* Set up SSRs */
 214        dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0);
 215        if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) ||
 216            mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE))
 217                goto err;
 218
 219        /* Set up GMRs */
 220        for (i = 0; i < 32; ++i) {
 221                if (i >= 12 && i < 15)
 222                        dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
 223                else if (i == 15)
 224                        dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
 225                else
 226                        dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
 227
 228                if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE))
 229                        goto err;
 230        }
 231
 232        /* Set up SCR */
 233        dbgi_wr_data3(adap, 1, 0, 0);
 234        if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE))
 235                goto err;
 236
 237        return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0,
 238                                    IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0);
 239err:
 240        return -EIO;
 241}
 242
 243static int init_idt43102(struct mc5 *mc5)
 244{
 245        int i;
 246        struct adapter *adap = mc5->adapter;
 247
 248        t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
 249                     adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) :
 250                     V_RDLAT(0xd) | V_SRCHLAT(0x12));
 251
 252        /*
 253         * Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask
 254         * for ACK- and AOPEN searches.
 255         */
 256        t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE);
 257        t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE);
 258        t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD,
 259                     IDT4_CMD_SEARCH144 | 0x3800);
 260        t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144);
 261        t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800);
 262        t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800);
 263        t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800);
 264        t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE);
 265        t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ);
 266
 267        t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3);
 268
 269        /* Set DBGI command mode for IDT TCAM. */
 270        t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
 271
 272        /* Set up GMRs */
 273        dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
 274        for (i = 0; i < 7; ++i)
 275                if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE))
 276                        goto err;
 277
 278        for (i = 0; i < 4; ++i)
 279                if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE))
 280                        goto err;
 281
 282        dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
 283        if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) ||
 284            mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) ||
 285            mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE))
 286                goto err;
 287
 288        dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
 289        if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE))
 290                goto err;
 291
 292        /* Set up SCR */
 293        dbgi_wr_data3(adap, 0xf0000000, 0, 0);
 294        if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE))
 295                goto err;
 296
 297        return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0,
 298                                    IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1);
 299err:
 300        return -EIO;
 301}
 302
 303/* Put MC5 in DBGI mode. */
 304static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5)
 305{
 306        t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
 307                     V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN);
 308}
 309
 310/* Put MC5 in M-Bus mode. */
 311static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
 312{
 313        t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
 314                     V_TMMODE(mc5->mode == MC5_MODE_72_BIT) |
 315                     V_COMPEN(mc5->mode == MC5_MODE_72_BIT) |
 316                     V_PRTYEN(mc5->parity_enabled) | F_MBUSEN);
 317}
 318
 319/*
 320 * Initialization that requires the OS and protocol layers to already
 321 * be intialized goes here.
 322 */
 323int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
 324                unsigned int nroutes)
 325{
 326        u32 cfg;
 327        int err;
 328        unsigned int tcam_size = mc5->tcam_size;
 329        struct adapter *adap = mc5->adapter;
 330
 331        if (!tcam_size)
 332                return 0;
 333
 334        if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size)
 335                return -EINVAL;
 336
 337        /* Reset the TCAM */
 338        cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE;
 339        cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST;
 340        t3_write_reg(adap, A_MC5_DB_CONFIG, cfg);
 341        if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) {
 342                CH_ERR(adap, "TCAM reset timed out\n");
 343                return -1;
 344        }
 345
 346        t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes);
 347        t3_write_reg(adap, A_MC5_DB_FILTER_TABLE,
 348                     tcam_size - nroutes - nfilters);
 349        t3_write_reg(adap, A_MC5_DB_SERVER_INDEX,
 350                     tcam_size - nroutes - nfilters - nservers);
 351
 352        mc5->parity_enabled = 1;
 353
 354        /* All the TCAM addresses we access have only the low 32 bits non 0 */
 355        t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0);
 356        t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0);
 357
 358        mc5_dbgi_mode_enable(mc5);
 359
 360        switch (mc5->part_type) {
 361        case IDT75P52100:
 362                err = init_idt52100(mc5);
 363                break;
 364        case IDT75N43102:
 365                err = init_idt43102(mc5);
 366                break;
 367        default:
 368                CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type);
 369                err = -EINVAL;
 370                break;
 371        }
 372
 373        mc5_dbgi_mode_disable(mc5);
 374        return err;
 375}
 376
 377/*
 378 *      read_mc5_range - dump a part of the memory managed by MC5
 379 *      @mc5: the MC5 handle
 380 *      @start: the start address for the dump
 381 *      @n: number of 72-bit words to read
 382 *      @buf: result buffer
 383 *
 384 *      Read n 72-bit words from MC5 memory from the given start location.
 385 */
 386int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start,
 387                      unsigned int n, u32 *buf)
 388{
 389        u32 read_cmd;
 390        int err = 0;
 391        struct adapter *adap = mc5->adapter;
 392
 393        if (mc5->part_type == IDT75P52100)
 394                read_cmd = IDT_CMD_READ;
 395        else if (mc5->part_type == IDT75N43102)
 396                read_cmd = IDT4_CMD_READ;
 397        else
 398                return -EINVAL;
 399
 400        mc5_dbgi_mode_enable(mc5);
 401
 402        while (n--) {
 403                t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++);
 404                if (mc5_cmd_write(adap, read_cmd)) {
 405                        err = -EIO;
 406                        break;
 407                }
 408                dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf);
 409                buf += 3;
 410        }
 411
 412        mc5_dbgi_mode_disable(mc5);
 413        return 0;
 414}
 415
 416#define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR)
 417
 418/*
 419 * MC5 interrupt handler
 420 */
 421void t3_mc5_intr_handler(struct mc5 *mc5)
 422{
 423        struct adapter *adap = mc5->adapter;
 424        u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE);
 425
 426        if ((cause & F_PARITYERR) && mc5->parity_enabled) {
 427                CH_ALERT(adap, "MC5 parity error\n");
 428                mc5->stats.parity_err++;
 429        }
 430
 431        if (cause & F_REQQPARERR) {
 432                CH_ALERT(adap, "MC5 request queue parity error\n");
 433                mc5->stats.reqq_parity_err++;
 434        }
 435
 436        if (cause & F_DISPQPARERR) {
 437                CH_ALERT(adap, "MC5 dispatch queue parity error\n");
 438                mc5->stats.dispq_parity_err++;
 439        }
 440
 441        if (cause & F_ACTRGNFULL)
 442                mc5->stats.active_rgn_full++;
 443        if (cause & F_NFASRCHFAIL)
 444                mc5->stats.nfa_srch_err++;
 445        if (cause & F_UNKNOWNCMD)
 446                mc5->stats.unknown_cmd++;
 447        if (cause & F_DELACTEMPTY)
 448                mc5->stats.del_act_empty++;
 449        if (cause & MC5_INT_FATAL)
 450                t3_fatal_err(adap);
 451
 452        t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause);
 453}
 454
 455void t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode)
 456{
 457#define K * 1024
 458
 459        static unsigned int tcam_part_size[] = {        /* in K 72-bit entries */
 460                64 K, 128 K, 256 K, 32 K
 461        };
 462
 463#undef K
 464
 465        u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG);
 466
 467        mc5->adapter = adapter;
 468        mc5->mode = (unsigned char)mode;
 469        mc5->part_type = (unsigned char)G_TMTYPE(cfg);
 470        if (cfg & F_TMTYPEHI)
 471                mc5->part_type |= 4;
 472
 473        mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)];
 474        if (mode == MC5_MODE_144_BIT)
 475                mc5->tcam_size /= 2;
 476}
 477