/*
 * drivers/net/ibm_newemac/core.h
 *
 * Driver for PowerPC 4xx on-chip ethernet controller.
 *
 * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
 *                <benh@kernel.crashing.org>
 *
 * Based on the arch/ppc version of the driver:
 *
 * Copyright (c) 2004, 2005 Zultys Technologies.
 * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
 *
 * Based on original work by
 *      Armin Kuster <akuster@mvista.com>
 *      Johnnie Peters <jpeters@mvista.com>
 *      Copyright 2000, 2001 MontaVista Softare Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */
#ifndef __IBM_NEWEMAC_CORE_H
#define __IBM_NEWEMAC_CORE_H

#include <linux/module.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/of_platform.h>

#include <asm/io.h>
#include <asm/dcr.h>

#include "emac.h"
#include "phy.h"
#include "zmii.h"
#include "rgmii.h"
#include "mal.h"
#include "tah.h"
#include "debug.h"

#define NUM_TX_BUFF                     CONFIG_IBM_NEW_EMAC_TXB
#define NUM_RX_BUFF                     CONFIG_IBM_NEW_EMAC_RXB

/* Simple sanity check */
#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256
#error Invalid number of buffer descriptors (greater than 256)
#endif

#define EMAC_MIN_MTU                    46

/* Maximum L2 header length (VLAN tagged, no FCS) */
#define EMAC_MTU_OVERHEAD               (6 * 2 + 2 + 4)

/* RX BD size for the given MTU */
static inline int emac_rx_size(int mtu)
{
        if (mtu > ETH_DATA_LEN)
                return MAL_MAX_RX_SIZE;
        else
                return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD);
}

#define EMAC_DMA_ALIGN(x)               ALIGN((x), dma_get_cache_alignment())

#define EMAC_RX_SKB_HEADROOM            \
        EMAC_DMA_ALIGN(CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM)

/* Size of RX skb for the given MTU */
static inline int emac_rx_skb_size(int mtu)
{
        int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu));
        return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM;
}

/* RX DMA sync size */
static inline int emac_rx_sync_size(int mtu)
{
        return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2);
}

/* Driver statistcs is split into two parts to make it more cache friendly:
 *   - normal statistics (packet count, etc)
 *   - error statistics
 *
 * When statistics is requested by ethtool, these parts are concatenated,
 * normal one goes first.
 *
 * Please, keep these structures in sync with emac_stats_keys.
 */

/* Normal TX/RX Statistics */
struct emac_stats {
        u64 rx_packets;
        u64 rx_bytes;
        u64 tx_packets;
        u64 tx_bytes;
        u64 rx_packets_csum;
        u64 tx_packets_csum;
};

/* Error statistics */
struct emac_error_stats {
        u64 tx_undo;

        /* Software RX Errors */
        u64 rx_dropped_stack;
        u64 rx_dropped_oom;
        u64 rx_dropped_error;
        u64 rx_dropped_resize;
        u64 rx_dropped_mtu;
        u64 rx_stopped;
        /* BD reported RX errors */
        u64 rx_bd_errors;
        u64 rx_bd_overrun;
        u64 rx_bd_bad_packet;
        u64 rx_bd_runt_packet;
        u64 rx_bd_short_event;
        u64 rx_bd_alignment_error;
        u64 rx_bd_bad_fcs;
        u64 rx_bd_packet_too_long;
        u64 rx_bd_out_of_range;
        u64 rx_bd_in_range;
        /* EMAC IRQ reported RX errors */
        u64 rx_parity;
        u64 rx_fifo_overrun;
        u64 rx_overrun;
        u64 rx_bad_packet;
        u64 rx_runt_packet;
        u64 rx_short_event;
        u64 rx_alignment_error;
        u64 rx_bad_fcs;
        u64 rx_packet_too_long;
        u64 rx_out_of_range;
        u64 rx_in_range;

        /* Software TX Errors */
        u64 tx_dropped;
        /* BD reported TX errors */
        u64 tx_bd_errors;
        u64 tx_bd_bad_fcs;
        u64 tx_bd_carrier_loss;
        u64 tx_bd_excessive_deferral;
        u64 tx_bd_excessive_collisions;
        u64 tx_bd_late_collision;
        u64 tx_bd_multple_collisions;
        u64 tx_bd_single_collision;
        u64 tx_bd_underrun;
        u64 tx_bd_sqe;
        /* EMAC IRQ reported TX errors */
        u64 tx_parity;
        u64 tx_underrun;
        u64 tx_sqe;
        u64 tx_errors;
};

#define EMAC_ETHTOOL_STATS_COUNT        ((sizeof(struct emac_stats) + \
                                          sizeof(struct emac_error_stats)) \
                                         / sizeof(u64))

struct emac_instance {
        struct net_device               *ndev;
        struct resource                 rsrc_regs;
        struct emac_regs                __iomem *emacp;
        struct of_device                *ofdev;
        struct device_node              **blist; /* bootlist entry */

        /* MAL linkage */
        u32                             mal_ph;
        struct of_device                *mal_dev;
        u32                             mal_rx_chan;
        u32                             mal_tx_chan;
        struct mal_instance             *mal;
        struct mal_commac               commac;

        /* PHY infos */
        u32                             phy_mode;
        u32                             phy_map;
        u32                             phy_address;
        u32                             phy_feat_exc;
        struct mii_phy                  phy;
        struct mutex                    link_lock;
        struct delayed_work             link_work;
        int                             link_polling;

        /* GPCS PHY infos */
        u32                             gpcs_address;

        /* Shared MDIO if any */
        u32                             mdio_ph;
        struct of_device                *mdio_dev;
        struct emac_instance            *mdio_instance;
        struct mutex                    mdio_lock;

        /* ZMII infos if any */
        u32                             zmii_ph;
        u32                             zmii_port;
        struct of_device                *zmii_dev;

        /* RGMII infos if any */
        u32                             rgmii_ph;
        u32                             rgmii_port;
        struct of_device                *rgmii_dev;

        /* TAH infos if any */
        u32                             tah_ph;
        u32                             tah_port;
        struct of_device                *tah_dev;

        /* IRQs */
        int                             wol_irq;
        int                             emac_irq;

        /* OPB bus frequency in Mhz */
        u32                             opb_bus_freq;

        /* Cell index within an ASIC (for clk mgmnt) */
        u32                             cell_index;

        /* Max supported MTU */
        u32                             max_mtu;

        /* Feature bits (from probe table) */
        unsigned int                    features;

        /* Tx and Rx fifo sizes & other infos in bytes */
        u32                             tx_fifo_size;
        u32                             tx_fifo_size_gige;
        u32                             rx_fifo_size;
        u32                             rx_fifo_size_gige;
        u32                             fifo_entry_size;
        u32                             mal_burst_size; /* move to MAL ? */

        /* IAHT and GAHT filter parameterization */
        u32                             xaht_slots_shift;
        u32                             xaht_width_shift;

        /* Descriptor management
         */
        struct mal_descriptor           *tx_desc;
        int                             tx_cnt;
        int                             tx_slot;
        int                             ack_slot;

        struct mal_descriptor           *rx_desc;
        int                             rx_slot;
        struct sk_buff                  *rx_sg_skb;     /* 1 */
        int                             rx_skb_size;
        int                             rx_sync_size;

        struct sk_buff                  *tx_skb[NUM_TX_BUFF];
        struct sk_buff                  *rx_skb[NUM_RX_BUFF];

        /* Stats
         */
        struct emac_error_stats         estats;
        struct net_device_stats         nstats;
        struct emac_stats               stats;

        /* Misc
         */
        int                             reset_failed;
        int                             stop_timeout;   /* in us */
        int                             no_mcast;
        int                             mcast_pending;
        int                             opened;
        struct work_struct              reset_work;
        spinlock_t                      lock;
};

/*
 * Features of various EMAC implementations
 */

/*
 * No flow control on 40x according to the original driver
 */
#define EMAC_FTR_NO_FLOW_CONTROL_40x    0x00000001
/*
 * Cell is an EMAC4
 */
#define EMAC_FTR_EMAC4                  0x00000002
/*
 * For the 440SPe, AMCC inexplicably changed the polarity of
 * the "operation complete" bit in the MII control register.
 */
#define EMAC_FTR_STACR_OC_INVERT        0x00000004
/*
 * Set if we have a TAH.
 */
#define EMAC_FTR_HAS_TAH                0x00000008
/*
 * Set if we have a ZMII.
 */
#define EMAC_FTR_HAS_ZMII               0x00000010
/*
 * Set if we have a RGMII.
 */
#define EMAC_FTR_HAS_RGMII              0x00000020
/*
 * Set if we have new type STACR with STAOPC
 */
#define EMAC_FTR_HAS_NEW_STACR          0x00000040
/*
 * Set if we need phy clock workaround for 440gx
 */
#define EMAC_FTR_440GX_PHY_CLK_FIX      0x00000080
/*
 * Set if we need phy clock workaround for 440ep or 440gr
 */
#define EMAC_FTR_440EP_PHY_CLK_FIX      0x00000100
/*
 * The 405EX and 460EX contain the EMAC4SYNC core
 */
#define EMAC_FTR_EMAC4SYNC              0x00000200
/*
 * Set if we need phy clock workaround for 460ex or 460gt
 */
#define EMAC_FTR_460EX_PHY_CLK_FIX      0x00000400


/* Right now, we don't quite handle the always/possible masks on the
 * most optimal way as we don't have a way to say something like
 * always EMAC4. Patches welcome.
 */
enum {
        EMAC_FTRS_ALWAYS        = 0,

        EMAC_FTRS_POSSIBLE      =
#ifdef CONFIG_IBM_NEW_EMAC_EMAC4
            EMAC_FTR_EMAC4      | EMAC_FTR_EMAC4SYNC    |
            EMAC_FTR_HAS_NEW_STACR      |
            EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
#endif
#ifdef CONFIG_IBM_NEW_EMAC_TAH
            EMAC_FTR_HAS_TAH    |
#endif
#ifdef CONFIG_IBM_NEW_EMAC_ZMII
            EMAC_FTR_HAS_ZMII   |
#endif
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
            EMAC_FTR_HAS_RGMII  |
#endif
#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL
            EMAC_FTR_NO_FLOW_CONTROL_40x |
#endif
        EMAC_FTR_460EX_PHY_CLK_FIX |
        EMAC_FTR_440EP_PHY_CLK_FIX,
};

static inline int emac_has_feature(struct emac_instance *dev,
                                   unsigned long feature)
{
        return (EMAC_FTRS_ALWAYS & feature) ||
               (EMAC_FTRS_POSSIBLE & dev->features & feature);
}

/*
 * Various instances of the EMAC core have varying 1) number of
 * address match slots, 2) width of the registers for handling address
 * match slots, 3) number of registers for handling address match
 * slots and 4) base offset for those registers.
 *
 * These macros and inlines handle these differences based on
 * parameters supplied by the device structure which are, in turn,
 * initialized based on the "compatible" entry in the device tree.
 */

#define EMAC4_XAHT_SLOTS_SHIFT          6
#define EMAC4_XAHT_WIDTH_SHIFT          4

#define EMAC4SYNC_XAHT_SLOTS_SHIFT      8
#define EMAC4SYNC_XAHT_WIDTH_SHIFT      5

#define EMAC_XAHT_SLOTS(dev)            (1 << (dev)->xaht_slots_shift)
#define EMAC_XAHT_WIDTH(dev)            (1 << (dev)->xaht_width_shift)
#define EMAC_XAHT_REGS(dev)             (1 << ((dev)->xaht_slots_shift - \
                                               (dev)->xaht_width_shift))

#define EMAC_XAHT_CRC_TO_SLOT(dev, crc)                 \
        ((EMAC_XAHT_SLOTS(dev) - 1) -                   \
         ((crc) >> ((sizeof (u32) * BITS_PER_BYTE) -    \
                    (dev)->xaht_slots_shift)))

#define EMAC_XAHT_SLOT_TO_REG(dev, slot)                \
        ((slot) >> (dev)->xaht_width_shift)

#define EMAC_XAHT_SLOT_TO_MASK(dev, slot)               \
        ((u32)(1 << (EMAC_XAHT_WIDTH(dev) - 1)) >>      \
         ((slot) & (u32)(EMAC_XAHT_WIDTH(dev) - 1)))

static inline u32 *emac_xaht_base(struct emac_instance *dev)
{
        struct emac_regs __iomem *p = dev->emacp;
        int offset;

        /* The first IAHT entry always is the base of the block of
         * IAHT and GAHT registers.
         */
        if (emac_has_feature(dev, EMAC_FTR_EMAC4SYNC))
                offset = offsetof(struct emac_regs, u1.emac4sync.iaht1);
        else
                offset = offsetof(struct emac_regs, u0.emac4.iaht1);

        return ((u32 *)((ptrdiff_t)p + offset));
}

static inline u32 *emac_gaht_base(struct emac_instance *dev)
{
        /* GAHT registers always come after an identical number of
         * IAHT registers.
         */
        return (emac_xaht_base(dev) + EMAC_XAHT_REGS(dev));
}

static inline u32 *emac_iaht_base(struct emac_instance *dev)
{
        /* IAHT registers always come before an identical number of
         * GAHT registers.
         */
        return (emac_xaht_base(dev));
}

/* Ethtool get_regs complex data.
 * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH
 * when available.
 *
 * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr,
 * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers.
 * Each register component is preceded with emac_ethtool_regs_subhdr.
 * Order of the optional headers follows their relative bit posititions
 * in emac_ethtool_regs_hdr.components
 */
#define EMAC_ETHTOOL_REGS_ZMII          0x00000001
#define EMAC_ETHTOOL_REGS_RGMII         0x00000002
#define EMAC_ETHTOOL_REGS_TAH           0x00000004

struct emac_ethtool_regs_hdr {
        u32 components;
};

struct emac_ethtool_regs_subhdr {
        u32 version;
        u32 index;
};

#define EMAC_ETHTOOL_REGS_VER           0
#define EMAC_ETHTOOL_REGS_SIZE(dev)     ((dev)->rsrc_regs.end - \
                                         (dev)->rsrc_regs.start + 1)
#define EMAC4_ETHTOOL_REGS_VER          1
#define EMAC4_ETHTOOL_REGS_SIZE(dev)    ((dev)->rsrc_regs.end - \
                                         (dev)->rsrc_regs.start + 1)

#endif /* __IBM_NEWEMAC_CORE_H */