linux/drivers/net/wan/cosa.h
<<
>>
Prefs
   1/* $Id: cosa.h,v 1.6 1999/01/06 14:02:44 kas Exp $ */
   2
   3/*
   4 *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <kas@fi.muni.cz>
   5 *
   6 *  This program is free software; you can redistribute it and/or modify
   7 *  it under the terms of the GNU General Public License as published by
   8 *  the Free Software Foundation; either version 2 of the License, or
   9 *  (at your option) any later version.
  10 *
  11 *  This program is distributed in the hope that it will be useful,
  12 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 *  GNU General Public License for more details.
  15 *
  16 *  You should have received a copy of the GNU General Public License
  17 *  along with this program; if not, write to the Free Software
  18 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19 */
  20
  21#ifndef COSA_H__
  22#define COSA_H__
  23
  24#include <linux/ioctl.h>
  25
  26#ifdef __KERNEL__
  27/* status register - output bits */
  28#define SR_RX_DMA_ENA   0x04    /* receiver DMA enable bit */
  29#define SR_TX_DMA_ENA   0x08    /* transmitter DMA enable bit */
  30#define SR_RST          0x10    /* SRP reset */
  31#define SR_USR_INT_ENA  0x20    /* user interrupt enable bit */
  32#define SR_TX_INT_ENA   0x40    /* transmitter interrupt enable bit */
  33#define SR_RX_INT_ENA   0x80    /* receiver interrupt enable bit */
  34
  35/* status register - input bits */
  36#define SR_USR_RQ       0x20    /* user interrupt request pending */
  37#define SR_TX_RDY       0x40    /* transmitter empty (ready) */
  38#define SR_RX_RDY       0x80    /* receiver data ready */
  39
  40#define SR_UP_REQUEST   0x02    /* request from SRP to transfer data
  41                                   up to PC */
  42#define SR_DOWN_REQUEST 0x01    /* SRP is able to transfer data down
  43                                   from PC to SRP */
  44#define SR_END_OF_TRANSFER      0x03    /* SRP signalize end of
  45                                           transfer (up or down) */
  46
  47#define SR_CMD_FROM_SRP_MASK    0x03    /* mask to get SRP command */
  48
  49/* bits in driver status byte definitions : */
  50#define SR_RDY_RCV      0x01    /* ready to receive packet */
  51#define SR_RDY_SND      0x02    /* ready to send packet */
  52#define SR_CMD_PND      0x04    /* command pending */ /* not currently used */
  53
  54/* ???? */
  55#define SR_PKT_UP       0x01    /* transfer of packet up in progress */
  56#define SR_PKT_DOWN     0x02    /* transfer of packet down in progress */
  57
  58#endif /* __KERNEL__ */
  59
  60#define SR_LOAD_ADDR    0x4400  /* SRP microcode load address */
  61#define SR_START_ADDR   0x4400  /* SRP microcode start address */
  62
  63#define COSA_LOAD_ADDR    0x400  /* SRP microcode load address */
  64#define COSA_MAX_FIRMWARE_SIZE  0x10000
  65
  66/* ioctls */
  67struct cosa_download {
  68        int addr, len;
  69        char __user *code;
  70};
  71
  72/* Reset the device */
  73#define COSAIORSET      _IO('C',0xf0)
  74
  75/* Start microcode at given address */
  76#define COSAIOSTRT      _IOW('C',0xf1, int)
  77
  78/* Read the block from the device memory */
  79#define COSAIORMEM      _IOWR('C',0xf2, struct cosa_download *)
  80        /* actually the struct cosa_download itself; this is to keep
  81         * the ioctl number same as in 2.4 in order to keep the user-space
  82         * utils compatible. */
  83
  84/* Write the block to the device memory (i.e. download the microcode) */
  85#define COSAIODOWNLD    _IOW('C',0xf2, struct cosa_download *)
  86        /* actually the struct cosa_download itself; this is to keep
  87         * the ioctl number same as in 2.4 in order to keep the user-space
  88         * utils compatible. */
  89
  90/* Read the device type (one of "srp", "cosa", and "cosa8" for now) */
  91#define COSAIORTYPE     _IOR('C',0xf3, char *)
  92
  93/* Read the device identification string */
  94#define COSAIORIDSTR    _IOR('C',0xf4, char *)
  95/* Maximum length of the identification string. */
  96#define COSA_MAX_ID_STRING 128
  97
  98/* Increment/decrement the module usage count :-) */
  99/* #define COSAIOMINC   _IO('C',0xf5) */
 100/* #define COSAIOMDEC   _IO('C',0xf6) */
 101
 102/* Get the total number of cards installed */
 103#define COSAIONRCARDS   _IO('C',0xf7)
 104
 105/* Get the number of channels on this card */
 106#define COSAIONRCHANS   _IO('C',0xf8)
 107
 108/* Set the driver for the bus-master operations */
 109#define COSAIOBMSET     _IOW('C', 0xf9, unsigned short)
 110
 111#define COSA_BM_OFF     0       /* Bus-mastering off - use ISA DMA (default) */
 112#define COSA_BM_ON      1       /* Bus-mastering on - faster but untested */
 113
 114/* Gets the busmaster status */
 115#define COSAIOBMGET     _IO('C', 0xfa)
 116
 117#endif /* !COSA_H__ */
 118