linux/drivers/net/wireless/wl12xx/wl1251_cmd.h
<<
>>
Prefs
   1/*
   2 * This file is part of wl1251
   3 *
   4 * Copyright (c) 1998-2007 Texas Instruments Incorporated
   5 * Copyright (C) 2008 Nokia Corporation
   6 *
   7 * Contact: Kalle Valo <kalle.valo@nokia.com>
   8 *
   9 * This program is free software; you can redistribute it and/or
  10 * modify it under the terms of the GNU General Public License
  11 * version 2 as published by the Free Software Foundation.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16 * General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; if not, write to the Free Software
  20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  21 * 02110-1301 USA
  22 *
  23 */
  24
  25#ifndef __WL1251_CMD_H__
  26#define __WL1251_CMD_H__
  27
  28#include "wl1251.h"
  29
  30struct acx_header;
  31
  32int wl1251_cmd_send(struct wl1251 *wl, u16 type, void *buf, size_t buf_len);
  33int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer);
  34int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len);
  35int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len);
  36int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
  37                   void *bitmap, u16 bitmap_len, u8 bitmap_control);
  38int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable);
  39int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
  40                    u16 beacon_interval, u8 dtim_interval);
  41int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode);
  42int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
  43                           size_t len);
  44int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
  45                            void *buf, size_t buf_len);
  46
  47/* unit ms */
  48#define WL1251_COMMAND_TIMEOUT 2000
  49
  50enum wl1251_commands {
  51        CMD_RESET           = 0,
  52        CMD_INTERROGATE     = 1,    /*use this to read information elements*/
  53        CMD_CONFIGURE       = 2,    /*use this to write information elements*/
  54        CMD_ENABLE_RX       = 3,
  55        CMD_ENABLE_TX       = 4,
  56        CMD_DISABLE_RX      = 5,
  57        CMD_DISABLE_TX      = 6,
  58        CMD_SCAN            = 8,
  59        CMD_STOP_SCAN       = 9,
  60        CMD_VBM             = 10,
  61        CMD_START_JOIN      = 11,
  62        CMD_SET_KEYS        = 12,
  63        CMD_READ_MEMORY     = 13,
  64        CMD_WRITE_MEMORY    = 14,
  65        CMD_BEACON          = 19,
  66        CMD_PROBE_RESP      = 20,
  67        CMD_NULL_DATA       = 21,
  68        CMD_PROBE_REQ       = 22,
  69        CMD_TEST            = 23,
  70        CMD_RADIO_CALIBRATE     = 25,   /* OBSOLETE */
  71        CMD_ENABLE_RX_PATH      = 27,   /* OBSOLETE */
  72        CMD_NOISE_HIST      = 28,
  73        CMD_RX_RESET        = 29,
  74        CMD_PS_POLL         = 30,
  75        CMD_QOS_NULL_DATA   = 31,
  76        CMD_LNA_CONTROL     = 32,
  77        CMD_SET_BCN_MODE    = 33,
  78        CMD_MEASUREMENT      = 34,
  79        CMD_STOP_MEASUREMENT = 35,
  80        CMD_DISCONNECT       = 36,
  81        CMD_SET_PS_MODE      = 37,
  82        CMD_CHANNEL_SWITCH   = 38,
  83        CMD_STOP_CHANNEL_SWICTH = 39,
  84        CMD_AP_DISCOVERY     = 40,
  85        CMD_STOP_AP_DISCOVERY = 41,
  86        CMD_SPS_SCAN = 42,
  87        CMD_STOP_SPS_SCAN = 43,
  88        CMD_HEALTH_CHECK     = 45,
  89        CMD_DEBUG            = 46,
  90        CMD_TRIGGER_SCAN_TO  = 47,
  91
  92        NUM_COMMANDS,
  93        MAX_COMMAND_ID = 0xFFFF,
  94};
  95
  96#define MAX_CMD_PARAMS 572
  97
  98struct wl1251_cmd_header {
  99        u16 id;
 100        u16 status;
 101        /* payload */
 102        u8 data[0];
 103} __attribute__ ((packed));
 104
 105struct  wl1251_command {
 106        struct wl1251_cmd_header header;
 107        u8  parameters[MAX_CMD_PARAMS];
 108};
 109
 110enum {
 111        CMD_MAILBOX_IDLE                        =  0,
 112        CMD_STATUS_SUCCESS                      =  1,
 113        CMD_STATUS_UNKNOWN_CMD                  =  2,
 114        CMD_STATUS_UNKNOWN_IE                   =  3,
 115        CMD_STATUS_REJECT_MEAS_SG_ACTIVE        = 11,
 116        CMD_STATUS_RX_BUSY                      = 13,
 117        CMD_STATUS_INVALID_PARAM                = 14,
 118        CMD_STATUS_TEMPLATE_TOO_LARGE           = 15,
 119        CMD_STATUS_OUT_OF_MEMORY                = 16,
 120        CMD_STATUS_STA_TABLE_FULL               = 17,
 121        CMD_STATUS_RADIO_ERROR                  = 18,
 122        CMD_STATUS_WRONG_NESTING                = 19,
 123        CMD_STATUS_TIMEOUT                      = 21, /* Driver internal use.*/
 124        CMD_STATUS_FW_RESET                     = 22, /* Driver internal use.*/
 125        MAX_COMMAND_STATUS                      = 0xff
 126};
 127
 128
 129/*
 130 * CMD_READ_MEMORY
 131 *
 132 * The host issues this command to read the WiLink device memory/registers.
 133 *
 134 * Note: The Base Band address has special handling (16 bits registers and
 135 * addresses). For more information, see the hardware specification.
 136 */
 137/*
 138 * CMD_WRITE_MEMORY
 139 *
 140 * The host issues this command to write the WiLink device memory/registers.
 141 *
 142 * The Base Band address has special handling (16 bits registers and
 143 * addresses). For more information, see the hardware specification.
 144 */
 145#define MAX_READ_SIZE 256
 146
 147struct cmd_read_write_memory {
 148        struct wl1251_cmd_header header;
 149
 150        /* The address of the memory to read from or write to.*/
 151        u32 addr;
 152
 153        /* The amount of data in bytes to read from or write to the WiLink
 154         * device.*/
 155        u32 size;
 156
 157        /* The actual value read from or written to the Wilink. The source
 158           of this field is the Host in WRITE command or the Wilink in READ
 159           command. */
 160        u8 value[MAX_READ_SIZE];
 161};
 162
 163#define CMDMBOX_HEADER_LEN 4
 164#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
 165
 166
 167struct basic_scan_parameters {
 168        u32 rx_config_options;
 169        u32 rx_filter_options;
 170
 171        /*
 172         * Scan options:
 173         * bit 0: When this bit is set, passive scan.
 174         * bit 1: Band, when this bit is set we scan
 175         * in the 5Ghz band.
 176         * bit 2: voice mode, 0 for normal scan.
 177         * bit 3: scan priority, 1 for high priority.
 178         */
 179        u16 scan_options;
 180
 181        /* Number of channels to scan */
 182        u8 num_channels;
 183
 184        /* Number opf probe requests to send, per channel */
 185        u8 num_probe_requests;
 186
 187        /* Rate and modulation for probe requests */
 188        u16 tx_rate;
 189
 190        u8 tid_trigger;
 191        u8 ssid_len;
 192        u32 ssid[8];
 193
 194} __attribute__ ((packed));
 195
 196struct basic_scan_channel_parameters {
 197        u32 min_duration; /* in TU */
 198        u32 max_duration; /* in TU */
 199        u32 bssid_lsb;
 200        u16 bssid_msb;
 201
 202        /*
 203         * bits 0-3: Early termination count.
 204         * bits 4-5: Early termination condition.
 205         */
 206        u8 early_termination;
 207
 208        u8 tx_power_att;
 209        u8 channel;
 210        u8 pad[3];
 211} __attribute__ ((packed));
 212
 213/* SCAN parameters */
 214#define SCAN_MAX_NUM_OF_CHANNELS 16
 215
 216struct cmd_scan {
 217        struct wl1251_cmd_header header;
 218
 219        struct basic_scan_parameters params;
 220        struct basic_scan_channel_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
 221} __attribute__ ((packed));
 222
 223enum {
 224        BSS_TYPE_IBSS = 0,
 225        BSS_TYPE_STA_BSS = 2,
 226        BSS_TYPE_AP_BSS = 3,
 227        MAX_BSS_TYPE = 0xFF
 228};
 229
 230#define JOIN_CMD_CTRL_TX_FLUSH             0x80 /* Firmware flushes all Tx */
 231#define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE  0x01 /* Early wakeup time */
 232
 233
 234struct cmd_join {
 235        struct wl1251_cmd_header header;
 236
 237        u32 bssid_lsb;
 238        u16 bssid_msb;
 239        u16 beacon_interval; /* in TBTTs */
 240        u32 rx_config_options;
 241        u32 rx_filter_options;
 242
 243        /*
 244         * The target uses this field to determine the rate at
 245         * which to transmit control frame responses (such as
 246         * ACK or CTS frames).
 247         */
 248        u16 basic_rate_set;
 249        u8 dtim_interval;
 250        u8 tx_ctrl_frame_rate; /* OBSOLETE */
 251        u8 tx_ctrl_frame_mod;  /* OBSOLETE */
 252        /*
 253         * bits 0-2: This bitwise field specifies the type
 254         * of BSS to start or join (BSS_TYPE_*).
 255         * bit 4: Band - The radio band in which to join
 256         * or start.
 257         *  0 - 2.4GHz band
 258         *  1 - 5GHz band
 259         * bits 3, 5-7: Reserved
 260         */
 261        u8 bss_type;
 262        u8 channel;
 263        u8 ssid_len;
 264        u8 ssid[IW_ESSID_MAX_SIZE];
 265        u8 ctrl; /* JOIN_CMD_CTRL_* */
 266        u8 tx_mgt_frame_rate; /* OBSOLETE */
 267        u8 tx_mgt_frame_mod;  /* OBSOLETE */
 268        u8 reserved;
 269} __attribute__ ((packed));
 270
 271struct cmd_enabledisable_path {
 272        struct wl1251_cmd_header header;
 273
 274        u8 channel;
 275        u8 padding[3];
 276} __attribute__ ((packed));
 277
 278#define WL1251_MAX_TEMPLATE_SIZE 300
 279
 280struct wl1251_cmd_packet_template {
 281        struct wl1251_cmd_header header;
 282
 283        __le16 size;
 284        u8 data[0];
 285} __attribute__ ((packed));
 286
 287#define TIM_ELE_ID    5
 288#define PARTIAL_VBM_MAX    251
 289
 290struct wl1251_tim {
 291        u8 identity;
 292        u8 length;
 293        u8 dtim_count;
 294        u8 dtim_period;
 295        u8 bitmap_ctrl;
 296        u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
 297} __attribute__ ((packed));
 298
 299/* Virtual Bit Map update */
 300struct wl1251_cmd_vbm_update {
 301        struct wl1251_cmd_header header;
 302        __le16 len;
 303        u8  padding[2];
 304        struct wl1251_tim tim;
 305} __attribute__ ((packed));
 306
 307enum wl1251_cmd_ps_mode {
 308        STATION_ACTIVE_MODE,
 309        STATION_POWER_SAVE_MODE
 310};
 311
 312struct wl1251_cmd_ps_params {
 313        struct wl1251_cmd_header header;
 314
 315        u8 ps_mode; /* STATION_* */
 316        u8 send_null_data; /* Do we have to send NULL data packet ? */
 317        u8 retries; /* Number of retires for the initial NULL data packet */
 318
 319         /*
 320          * TUs during which the target stays awake after switching
 321          * to power save mode.
 322          */
 323        u8 hang_over_period;
 324        u16 null_data_rate;
 325        u8 pad[2];
 326} __attribute__ ((packed));
 327
 328struct wl1251_cmd_trigger_scan_to {
 329        struct wl1251_cmd_header header;
 330
 331        u32 timeout;
 332};
 333
 334/* HW encryption keys */
 335#define NUM_ACCESS_CATEGORIES_COPY 4
 336#define MAX_KEY_SIZE 32
 337
 338/* When set, disable HW encryption */
 339#define DF_ENCRYPTION_DISABLE      0x01
 340/* When set, disable HW decryption */
 341#define DF_SNIFF_MODE_ENABLE       0x80
 342
 343enum wl1251_cmd_key_action {
 344        KEY_ADD_OR_REPLACE = 1,
 345        KEY_REMOVE         = 2,
 346        KEY_SET_ID         = 3,
 347        MAX_KEY_ACTION     = 0xffff,
 348};
 349
 350enum wl1251_cmd_key_type {
 351        KEY_WEP_DEFAULT       = 0,
 352        KEY_WEP_ADDR          = 1,
 353        KEY_AES_GROUP         = 4,
 354        KEY_AES_PAIRWISE      = 5,
 355        KEY_WEP_GROUP         = 6,
 356        KEY_TKIP_MIC_GROUP    = 10,
 357        KEY_TKIP_MIC_PAIRWISE = 11,
 358};
 359
 360/*
 361 *
 362 * key_type_e   key size    key format
 363 * ----------   ---------   ----------
 364 * 0x00         5, 13, 29   Key data
 365 * 0x01         5, 13, 29   Key data
 366 * 0x04         16          16 bytes of key data
 367 * 0x05         16          16 bytes of key data
 368 * 0x0a         32          16 bytes of TKIP key data
 369 *                          8 bytes of RX MIC key data
 370 *                          8 bytes of TX MIC key data
 371 * 0x0b         32          16 bytes of TKIP key data
 372 *                          8 bytes of RX MIC key data
 373 *                          8 bytes of TX MIC key data
 374 *
 375 */
 376
 377struct wl1251_cmd_set_keys {
 378        struct wl1251_cmd_header header;
 379
 380        /* Ignored for default WEP key */
 381        u8 addr[ETH_ALEN];
 382
 383        /* key_action_e */
 384        u16 key_action;
 385
 386        u16 reserved_1;
 387
 388        /* key size in bytes */
 389        u8 key_size;
 390
 391        /* key_type_e */
 392        u8 key_type;
 393        u8 ssid_profile;
 394
 395        /*
 396         * TKIP, AES: frame's key id field.
 397         * For WEP default key: key id;
 398         */
 399        u8 id;
 400        u8 reserved_2[6];
 401        u8 key[MAX_KEY_SIZE];
 402        u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
 403        u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
 404} __attribute__ ((packed));
 405
 406
 407#endif /* __WL1251_CMD_H__ */
 408