linux/drivers/scsi/libfc/fc_rport.c
<<
>>
Prefs
   1/*
   2 * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved.
   3 *
   4 * This program is free software; you can redistribute it and/or modify it
   5 * under the terms and conditions of the GNU General Public License,
   6 * version 2, as published by the Free Software Foundation.
   7 *
   8 * This program is distributed in the hope it will be useful, but WITHOUT
   9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  10 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  11 * more details.
  12 *
  13 * You should have received a copy of the GNU General Public License along with
  14 * this program; if not, write to the Free Software Foundation, Inc.,
  15 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  16 *
  17 * Maintained at www.Open-FCoE.org
  18 */
  19
  20/*
  21 * RPORT GENERAL INFO
  22 *
  23 * This file contains all processing regarding fc_rports. It contains the
  24 * rport state machine and does all rport interaction with the transport class.
  25 * There should be no other places in libfc that interact directly with the
  26 * transport class in regards to adding and deleting rports.
  27 *
  28 * fc_rport's represent N_Port's within the fabric.
  29 */
  30
  31/*
  32 * RPORT LOCKING
  33 *
  34 * The rport should never hold the rport mutex and then attempt to acquire
  35 * either the lport or disc mutexes. The rport's mutex is considered lesser
  36 * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for
  37 * more comments on the heirarchy.
  38 *
  39 * The locking strategy is similar to the lport's strategy. The lock protects
  40 * the rport's states and is held and released by the entry points to the rport
  41 * block. All _enter_* functions correspond to rport states and expect the rport
  42 * mutex to be locked before calling them. This means that rports only handle
  43 * one request or response at a time, since they're not critical for the I/O
  44 * path this potential over-use of the mutex is acceptable.
  45 */
  46
  47#include <linux/kernel.h>
  48#include <linux/spinlock.h>
  49#include <linux/interrupt.h>
  50#include <linux/rcupdate.h>
  51#include <linux/timer.h>
  52#include <linux/workqueue.h>
  53#include <asm/unaligned.h>
  54
  55#include <scsi/libfc.h>
  56#include <scsi/fc_encode.h>
  57
  58struct workqueue_struct *rport_event_queue;
  59
  60static void fc_rport_enter_plogi(struct fc_rport_priv *);
  61static void fc_rport_enter_prli(struct fc_rport_priv *);
  62static void fc_rport_enter_rtv(struct fc_rport_priv *);
  63static void fc_rport_enter_ready(struct fc_rport_priv *);
  64static void fc_rport_enter_logo(struct fc_rport_priv *);
  65static void fc_rport_enter_adisc(struct fc_rport_priv *);
  66
  67static void fc_rport_recv_plogi_req(struct fc_lport *,
  68                                    struct fc_seq *, struct fc_frame *);
  69static void fc_rport_recv_prli_req(struct fc_rport_priv *,
  70                                   struct fc_seq *, struct fc_frame *);
  71static void fc_rport_recv_prlo_req(struct fc_rport_priv *,
  72                                   struct fc_seq *, struct fc_frame *);
  73static void fc_rport_recv_logo_req(struct fc_lport *,
  74                                   struct fc_seq *, struct fc_frame *);
  75static void fc_rport_timeout(struct work_struct *);
  76static void fc_rport_error(struct fc_rport_priv *, struct fc_frame *);
  77static void fc_rport_error_retry(struct fc_rport_priv *, struct fc_frame *);
  78static void fc_rport_work(struct work_struct *);
  79
  80static const char *fc_rport_state_names[] = {
  81        [RPORT_ST_INIT] = "Init",
  82        [RPORT_ST_PLOGI] = "PLOGI",
  83        [RPORT_ST_PRLI] = "PRLI",
  84        [RPORT_ST_RTV] = "RTV",
  85        [RPORT_ST_READY] = "Ready",
  86        [RPORT_ST_LOGO] = "LOGO",
  87        [RPORT_ST_ADISC] = "ADISC",
  88        [RPORT_ST_DELETE] = "Delete",
  89};
  90
  91/**
  92 * fc_rport_lookup() - lookup a remote port by port_id
  93 * @lport: Fibre Channel host port instance
  94 * @port_id: remote port port_id to match
  95 */
  96static struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport,
  97                                             u32 port_id)
  98{
  99        struct fc_rport_priv *rdata;
 100
 101        list_for_each_entry(rdata, &lport->disc.rports, peers)
 102                if (rdata->ids.port_id == port_id &&
 103                    rdata->rp_state != RPORT_ST_DELETE)
 104                        return rdata;
 105        return NULL;
 106}
 107
 108/**
 109 * fc_rport_create() - Create a new remote port
 110 * @lport:   The local port that the new remote port is for
 111 * @port_id: The port ID for the new remote port
 112 *
 113 * Locking note:  must be called with the disc_mutex held.
 114 */
 115static struct fc_rport_priv *fc_rport_create(struct fc_lport *lport,
 116                                             u32 port_id)
 117{
 118        struct fc_rport_priv *rdata;
 119
 120        rdata = lport->tt.rport_lookup(lport, port_id);
 121        if (rdata)
 122                return rdata;
 123
 124        rdata = kzalloc(sizeof(*rdata), GFP_KERNEL);
 125        if (!rdata)
 126                return NULL;
 127
 128        rdata->ids.node_name = -1;
 129        rdata->ids.port_name = -1;
 130        rdata->ids.port_id = port_id;
 131        rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
 132
 133        kref_init(&rdata->kref);
 134        mutex_init(&rdata->rp_mutex);
 135        rdata->local_port = lport;
 136        rdata->rp_state = RPORT_ST_INIT;
 137        rdata->event = RPORT_EV_NONE;
 138        rdata->flags = FC_RP_FLAGS_REC_SUPPORTED;
 139        rdata->e_d_tov = lport->e_d_tov;
 140        rdata->r_a_tov = lport->r_a_tov;
 141        rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
 142        INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout);
 143        INIT_WORK(&rdata->event_work, fc_rport_work);
 144        if (port_id != FC_FID_DIR_SERV)
 145                list_add(&rdata->peers, &lport->disc.rports);
 146        return rdata;
 147}
 148
 149/**
 150 * fc_rport_destroy() - free a remote port after last reference is released.
 151 * @kref: pointer to kref inside struct fc_rport_priv
 152 */
 153static void fc_rport_destroy(struct kref *kref)
 154{
 155        struct fc_rport_priv *rdata;
 156
 157        rdata = container_of(kref, struct fc_rport_priv, kref);
 158        kfree(rdata);
 159}
 160
 161/**
 162 * fc_rport_state() - return a string for the state the rport is in
 163 * @rdata: remote port private data
 164 */
 165static const char *fc_rport_state(struct fc_rport_priv *rdata)
 166{
 167        const char *cp;
 168
 169        cp = fc_rport_state_names[rdata->rp_state];
 170        if (!cp)
 171                cp = "Unknown";
 172        return cp;
 173}
 174
 175/**
 176 * fc_set_rport_loss_tmo() - Set the remote port loss timeout in seconds.
 177 * @rport: Pointer to Fibre Channel remote port structure
 178 * @timeout: timeout in seconds
 179 */
 180void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
 181{
 182        if (timeout)
 183                rport->dev_loss_tmo = timeout + 5;
 184        else
 185                rport->dev_loss_tmo = 30;
 186}
 187EXPORT_SYMBOL(fc_set_rport_loss_tmo);
 188
 189/**
 190 * fc_plogi_get_maxframe() - Get max payload from the common service parameters
 191 * @flp: FLOGI payload structure
 192 * @maxval: upper limit, may be less than what is in the service parameters
 193 */
 194static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
 195                                          unsigned int maxval)
 196{
 197        unsigned int mfs;
 198
 199        /*
 200         * Get max payload from the common service parameters and the
 201         * class 3 receive data field size.
 202         */
 203        mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK;
 204        if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
 205                maxval = mfs;
 206        mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs);
 207        if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval)
 208                maxval = mfs;
 209        return maxval;
 210}
 211
 212/**
 213 * fc_rport_state_enter() - Change the rport's state
 214 * @rdata: The rport whose state should change
 215 * @new: The new state of the rport
 216 *
 217 * Locking Note: Called with the rport lock held
 218 */
 219static void fc_rport_state_enter(struct fc_rport_priv *rdata,
 220                                 enum fc_rport_state new)
 221{
 222        if (rdata->rp_state != new)
 223                rdata->retries = 0;
 224        rdata->rp_state = new;
 225}
 226
 227static void fc_rport_work(struct work_struct *work)
 228{
 229        u32 port_id;
 230        struct fc_rport_priv *rdata =
 231                container_of(work, struct fc_rport_priv, event_work);
 232        struct fc_rport_libfc_priv *rp;
 233        enum fc_rport_event event;
 234        struct fc_lport *lport = rdata->local_port;
 235        struct fc_rport_operations *rport_ops;
 236        struct fc_rport_identifiers ids;
 237        struct fc_rport *rport;
 238
 239        mutex_lock(&rdata->rp_mutex);
 240        event = rdata->event;
 241        rport_ops = rdata->ops;
 242        rport = rdata->rport;
 243
 244        FC_RPORT_DBG(rdata, "work event %u\n", event);
 245
 246        switch (event) {
 247        case RPORT_EV_READY:
 248                ids = rdata->ids;
 249                rdata->event = RPORT_EV_NONE;
 250                kref_get(&rdata->kref);
 251                mutex_unlock(&rdata->rp_mutex);
 252
 253                if (!rport)
 254                        rport = fc_remote_port_add(lport->host, 0, &ids);
 255                if (!rport) {
 256                        FC_RPORT_DBG(rdata, "Failed to add the rport\n");
 257                        lport->tt.rport_logoff(rdata);
 258                        kref_put(&rdata->kref, lport->tt.rport_destroy);
 259                        return;
 260                }
 261                mutex_lock(&rdata->rp_mutex);
 262                if (rdata->rport)
 263                        FC_RPORT_DBG(rdata, "rport already allocated\n");
 264                rdata->rport = rport;
 265                rport->maxframe_size = rdata->maxframe_size;
 266                rport->supported_classes = rdata->supported_classes;
 267
 268                rp = rport->dd_data;
 269                rp->local_port = lport;
 270                rp->rp_state = rdata->rp_state;
 271                rp->flags = rdata->flags;
 272                rp->e_d_tov = rdata->e_d_tov;
 273                rp->r_a_tov = rdata->r_a_tov;
 274                mutex_unlock(&rdata->rp_mutex);
 275
 276                if (rport_ops && rport_ops->event_callback) {
 277                        FC_RPORT_DBG(rdata, "callback ev %d\n", event);
 278                        rport_ops->event_callback(lport, rdata, event);
 279                }
 280                kref_put(&rdata->kref, lport->tt.rport_destroy);
 281                break;
 282
 283        case RPORT_EV_FAILED:
 284        case RPORT_EV_LOGO:
 285        case RPORT_EV_STOP:
 286                port_id = rdata->ids.port_id;
 287                mutex_unlock(&rdata->rp_mutex);
 288
 289                if (port_id != FC_FID_DIR_SERV) {
 290                        mutex_lock(&lport->disc.disc_mutex);
 291                        list_del(&rdata->peers);
 292                        mutex_unlock(&lport->disc.disc_mutex);
 293                }
 294
 295                if (rport_ops && rport_ops->event_callback) {
 296                        FC_RPORT_DBG(rdata, "callback ev %d\n", event);
 297                        rport_ops->event_callback(lport, rdata, event);
 298                }
 299                cancel_delayed_work_sync(&rdata->retry_work);
 300
 301                /*
 302                 * Reset any outstanding exchanges before freeing rport.
 303                 */
 304                lport->tt.exch_mgr_reset(lport, 0, port_id);
 305                lport->tt.exch_mgr_reset(lport, port_id, 0);
 306
 307                if (rport) {
 308                        rp = rport->dd_data;
 309                        rp->rp_state = RPORT_ST_DELETE;
 310                        mutex_lock(&rdata->rp_mutex);
 311                        rdata->rport = NULL;
 312                        mutex_unlock(&rdata->rp_mutex);
 313                        fc_remote_port_delete(rport);
 314                }
 315                kref_put(&rdata->kref, lport->tt.rport_destroy);
 316                break;
 317
 318        default:
 319                mutex_unlock(&rdata->rp_mutex);
 320                break;
 321        }
 322}
 323
 324/**
 325 * fc_rport_login() - Start the remote port login state machine
 326 * @rdata: private remote port
 327 *
 328 * Locking Note: Called without the rport lock held. This
 329 * function will hold the rport lock, call an _enter_*
 330 * function and then unlock the rport.
 331 *
 332 * This indicates the intent to be logged into the remote port.
 333 * If it appears we are already logged in, ADISC is used to verify
 334 * the setup.
 335 */
 336int fc_rport_login(struct fc_rport_priv *rdata)
 337{
 338        mutex_lock(&rdata->rp_mutex);
 339
 340        switch (rdata->rp_state) {
 341        case RPORT_ST_READY:
 342                FC_RPORT_DBG(rdata, "ADISC port\n");
 343                fc_rport_enter_adisc(rdata);
 344                break;
 345        default:
 346                FC_RPORT_DBG(rdata, "Login to port\n");
 347                fc_rport_enter_plogi(rdata);
 348                break;
 349        }
 350        mutex_unlock(&rdata->rp_mutex);
 351
 352        return 0;
 353}
 354
 355/**
 356 * fc_rport_enter_delete() - schedule a remote port to be deleted.
 357 * @rdata: private remote port
 358 * @event: event to report as the reason for deletion
 359 *
 360 * Locking Note: Called with the rport lock held.
 361 *
 362 * Allow state change into DELETE only once.
 363 *
 364 * Call queue_work only if there's no event already pending.
 365 * Set the new event so that the old pending event will not occur.
 366 * Since we have the mutex, even if fc_rport_work() is already started,
 367 * it'll see the new event.
 368 */
 369static void fc_rport_enter_delete(struct fc_rport_priv *rdata,
 370                                  enum fc_rport_event event)
 371{
 372        if (rdata->rp_state == RPORT_ST_DELETE)
 373                return;
 374
 375        FC_RPORT_DBG(rdata, "Delete port\n");
 376
 377        fc_rport_state_enter(rdata, RPORT_ST_DELETE);
 378
 379        if (rdata->event == RPORT_EV_NONE)
 380                queue_work(rport_event_queue, &rdata->event_work);
 381        rdata->event = event;
 382}
 383
 384/**
 385 * fc_rport_logoff() - Logoff and remove an rport
 386 * @rdata: private remote port
 387 *
 388 * Locking Note: Called without the rport lock held. This
 389 * function will hold the rport lock, call an _enter_*
 390 * function and then unlock the rport.
 391 */
 392int fc_rport_logoff(struct fc_rport_priv *rdata)
 393{
 394        mutex_lock(&rdata->rp_mutex);
 395
 396        FC_RPORT_DBG(rdata, "Remove port\n");
 397
 398        if (rdata->rp_state == RPORT_ST_DELETE) {
 399                FC_RPORT_DBG(rdata, "Port in Delete state, not removing\n");
 400                mutex_unlock(&rdata->rp_mutex);
 401                goto out;
 402        }
 403
 404        fc_rport_enter_logo(rdata);
 405
 406        /*
 407         * Change the state to Delete so that we discard
 408         * the response.
 409         */
 410        fc_rport_enter_delete(rdata, RPORT_EV_STOP);
 411        mutex_unlock(&rdata->rp_mutex);
 412
 413out:
 414        return 0;
 415}
 416
 417/**
 418 * fc_rport_enter_ready() - The rport is ready
 419 * @rdata: private remote port
 420 *
 421 * Locking Note: The rport lock is expected to be held before calling
 422 * this routine.
 423 */
 424static void fc_rport_enter_ready(struct fc_rport_priv *rdata)
 425{
 426        fc_rport_state_enter(rdata, RPORT_ST_READY);
 427
 428        FC_RPORT_DBG(rdata, "Port is Ready\n");
 429
 430        if (rdata->event == RPORT_EV_NONE)
 431                queue_work(rport_event_queue, &rdata->event_work);
 432        rdata->event = RPORT_EV_READY;
 433}
 434
 435/**
 436 * fc_rport_timeout() - Handler for the retry_work timer.
 437 * @work: The work struct of the fc_rport_priv
 438 *
 439 * Locking Note: Called without the rport lock held. This
 440 * function will hold the rport lock, call an _enter_*
 441 * function and then unlock the rport.
 442 */
 443static void fc_rport_timeout(struct work_struct *work)
 444{
 445        struct fc_rport_priv *rdata =
 446                container_of(work, struct fc_rport_priv, retry_work.work);
 447
 448        mutex_lock(&rdata->rp_mutex);
 449
 450        switch (rdata->rp_state) {
 451        case RPORT_ST_PLOGI:
 452                fc_rport_enter_plogi(rdata);
 453                break;
 454        case RPORT_ST_PRLI:
 455                fc_rport_enter_prli(rdata);
 456                break;
 457        case RPORT_ST_RTV:
 458                fc_rport_enter_rtv(rdata);
 459                break;
 460        case RPORT_ST_LOGO:
 461                fc_rport_enter_logo(rdata);
 462                break;
 463        case RPORT_ST_ADISC:
 464                fc_rport_enter_adisc(rdata);
 465                break;
 466        case RPORT_ST_READY:
 467        case RPORT_ST_INIT:
 468        case RPORT_ST_DELETE:
 469                break;
 470        }
 471
 472        mutex_unlock(&rdata->rp_mutex);
 473}
 474
 475/**
 476 * fc_rport_error() - Error handler, called once retries have been exhausted
 477 * @rdata: private remote port
 478 * @fp: The frame pointer
 479 *
 480 * Locking Note: The rport lock is expected to be held before
 481 * calling this routine
 482 */
 483static void fc_rport_error(struct fc_rport_priv *rdata, struct fc_frame *fp)
 484{
 485        FC_RPORT_DBG(rdata, "Error %ld in state %s, retries %d\n",
 486                     IS_ERR(fp) ? -PTR_ERR(fp) : 0,
 487                     fc_rport_state(rdata), rdata->retries);
 488
 489        switch (rdata->rp_state) {
 490        case RPORT_ST_PLOGI:
 491        case RPORT_ST_LOGO:
 492                fc_rport_enter_delete(rdata, RPORT_EV_FAILED);
 493                break;
 494        case RPORT_ST_RTV:
 495                fc_rport_enter_ready(rdata);
 496                break;
 497        case RPORT_ST_PRLI:
 498        case RPORT_ST_ADISC:
 499                fc_rport_enter_logo(rdata);
 500                break;
 501        case RPORT_ST_DELETE:
 502        case RPORT_ST_READY:
 503        case RPORT_ST_INIT:
 504                break;
 505        }
 506}
 507
 508/**
 509 * fc_rport_error_retry() - Error handler when retries are desired
 510 * @rdata: private remote port data
 511 * @fp: The frame pointer
 512 *
 513 * If the error was an exchange timeout retry immediately,
 514 * otherwise wait for E_D_TOV.
 515 *
 516 * Locking Note: The rport lock is expected to be held before
 517 * calling this routine
 518 */
 519static void fc_rport_error_retry(struct fc_rport_priv *rdata,
 520                                 struct fc_frame *fp)
 521{
 522        unsigned long delay = FC_DEF_E_D_TOV;
 523
 524        /* make sure this isn't an FC_EX_CLOSED error, never retry those */
 525        if (PTR_ERR(fp) == -FC_EX_CLOSED)
 526                return fc_rport_error(rdata, fp);
 527
 528        if (rdata->retries < rdata->local_port->max_rport_retry_count) {
 529                FC_RPORT_DBG(rdata, "Error %ld in state %s, retrying\n",
 530                             PTR_ERR(fp), fc_rport_state(rdata));
 531                rdata->retries++;
 532                /* no additional delay on exchange timeouts */
 533                if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
 534                        delay = 0;
 535                schedule_delayed_work(&rdata->retry_work, delay);
 536                return;
 537        }
 538
 539        return fc_rport_error(rdata, fp);
 540}
 541
 542/**
 543 * fc_rport_plogi_recv_resp() - Handle incoming ELS PLOGI response
 544 * @sp: current sequence in the PLOGI exchange
 545 * @fp: response frame
 546 * @rdata_arg: private remote port data
 547 *
 548 * Locking Note: This function will be called without the rport lock
 549 * held, but it will lock, call an _enter_* function or fc_rport_error
 550 * and then unlock the rport.
 551 */
 552static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 553                                void *rdata_arg)
 554{
 555        struct fc_rport_priv *rdata = rdata_arg;
 556        struct fc_lport *lport = rdata->local_port;
 557        struct fc_els_flogi *plp = NULL;
 558        unsigned int tov;
 559        u16 csp_seq;
 560        u16 cssp_seq;
 561        u8 op;
 562
 563        mutex_lock(&rdata->rp_mutex);
 564
 565        FC_RPORT_DBG(rdata, "Received a PLOGI %s\n", fc_els_resp_type(fp));
 566
 567        if (rdata->rp_state != RPORT_ST_PLOGI) {
 568                FC_RPORT_DBG(rdata, "Received a PLOGI response, but in state "
 569                             "%s\n", fc_rport_state(rdata));
 570                if (IS_ERR(fp))
 571                        goto err;
 572                goto out;
 573        }
 574
 575        if (IS_ERR(fp)) {
 576                fc_rport_error_retry(rdata, fp);
 577                goto err;
 578        }
 579
 580        op = fc_frame_payload_op(fp);
 581        if (op == ELS_LS_ACC &&
 582            (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
 583                rdata->ids.port_name = get_unaligned_be64(&plp->fl_wwpn);
 584                rdata->ids.node_name = get_unaligned_be64(&plp->fl_wwnn);
 585
 586                tov = ntohl(plp->fl_csp.sp_e_d_tov);
 587                if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR)
 588                        tov /= 1000;
 589                if (tov > rdata->e_d_tov)
 590                        rdata->e_d_tov = tov;
 591                csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
 592                cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq);
 593                if (cssp_seq < csp_seq)
 594                        csp_seq = cssp_seq;
 595                rdata->max_seq = csp_seq;
 596                rdata->maxframe_size = fc_plogi_get_maxframe(plp, lport->mfs);
 597                fc_rport_enter_prli(rdata);
 598        } else
 599                fc_rport_error_retry(rdata, fp);
 600
 601out:
 602        fc_frame_free(fp);
 603err:
 604        mutex_unlock(&rdata->rp_mutex);
 605        kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
 606}
 607
 608/**
 609 * fc_rport_enter_plogi() - Send Port Login (PLOGI) request to peer
 610 * @rdata: private remote port data
 611 *
 612 * Locking Note: The rport lock is expected to be held before calling
 613 * this routine.
 614 */
 615static void fc_rport_enter_plogi(struct fc_rport_priv *rdata)
 616{
 617        struct fc_lport *lport = rdata->local_port;
 618        struct fc_frame *fp;
 619
 620        FC_RPORT_DBG(rdata, "Port entered PLOGI state from %s state\n",
 621                     fc_rport_state(rdata));
 622
 623        fc_rport_state_enter(rdata, RPORT_ST_PLOGI);
 624
 625        rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
 626        fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
 627        if (!fp) {
 628                fc_rport_error_retry(rdata, fp);
 629                return;
 630        }
 631        rdata->e_d_tov = lport->e_d_tov;
 632
 633        if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PLOGI,
 634                                  fc_rport_plogi_resp, rdata, lport->e_d_tov))
 635                fc_rport_error_retry(rdata, fp);
 636        else
 637                kref_get(&rdata->kref);
 638}
 639
 640/**
 641 * fc_rport_prli_resp() - Process Login (PRLI) response handler
 642 * @sp: current sequence in the PRLI exchange
 643 * @fp: response frame
 644 * @rdata_arg: private remote port data
 645 *
 646 * Locking Note: This function will be called without the rport lock
 647 * held, but it will lock, call an _enter_* function or fc_rport_error
 648 * and then unlock the rport.
 649 */
 650static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 651                               void *rdata_arg)
 652{
 653        struct fc_rport_priv *rdata = rdata_arg;
 654        struct {
 655                struct fc_els_prli prli;
 656                struct fc_els_spp spp;
 657        } *pp;
 658        u32 roles = FC_RPORT_ROLE_UNKNOWN;
 659        u32 fcp_parm = 0;
 660        u8 op;
 661
 662        mutex_lock(&rdata->rp_mutex);
 663
 664        FC_RPORT_DBG(rdata, "Received a PRLI %s\n", fc_els_resp_type(fp));
 665
 666        if (rdata->rp_state != RPORT_ST_PRLI) {
 667                FC_RPORT_DBG(rdata, "Received a PRLI response, but in state "
 668                             "%s\n", fc_rport_state(rdata));
 669                if (IS_ERR(fp))
 670                        goto err;
 671                goto out;
 672        }
 673
 674        if (IS_ERR(fp)) {
 675                fc_rport_error_retry(rdata, fp);
 676                goto err;
 677        }
 678
 679        /* reinitialize remote port roles */
 680        rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
 681
 682        op = fc_frame_payload_op(fp);
 683        if (op == ELS_LS_ACC) {
 684                pp = fc_frame_payload_get(fp, sizeof(*pp));
 685                if (pp && pp->prli.prli_spp_len >= sizeof(pp->spp)) {
 686                        fcp_parm = ntohl(pp->spp.spp_params);
 687                        if (fcp_parm & FCP_SPPF_RETRY)
 688                                rdata->flags |= FC_RP_FLAGS_RETRY;
 689                }
 690
 691                rdata->supported_classes = FC_COS_CLASS3;
 692                if (fcp_parm & FCP_SPPF_INIT_FCN)
 693                        roles |= FC_RPORT_ROLE_FCP_INITIATOR;
 694                if (fcp_parm & FCP_SPPF_TARG_FCN)
 695                        roles |= FC_RPORT_ROLE_FCP_TARGET;
 696
 697                rdata->ids.roles = roles;
 698                fc_rport_enter_rtv(rdata);
 699
 700        } else {
 701                FC_RPORT_DBG(rdata, "Bad ELS response for PRLI command\n");
 702                fc_rport_enter_delete(rdata, RPORT_EV_FAILED);
 703        }
 704
 705out:
 706        fc_frame_free(fp);
 707err:
 708        mutex_unlock(&rdata->rp_mutex);
 709        kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
 710}
 711
 712/**
 713 * fc_rport_logo_resp() - Logout (LOGO) response handler
 714 * @sp: current sequence in the LOGO exchange
 715 * @fp: response frame
 716 * @rdata_arg: private remote port data
 717 *
 718 * Locking Note: This function will be called without the rport lock
 719 * held, but it will lock, call an _enter_* function or fc_rport_error
 720 * and then unlock the rport.
 721 */
 722static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
 723                               void *rdata_arg)
 724{
 725        struct fc_rport_priv *rdata = rdata_arg;
 726        u8 op;
 727
 728        mutex_lock(&rdata->rp_mutex);
 729
 730        FC_RPORT_DBG(rdata, "Received a LOGO %s\n", fc_els_resp_type(fp));
 731
 732        if (rdata->rp_state != RPORT_ST_LOGO) {
 733                FC_RPORT_DBG(rdata, "Received a LOGO response, but in state "
 734                             "%s\n", fc_rport_state(rdata));
 735                if (IS_ERR(fp))
 736                        goto err;
 737                goto out;
 738        }
 739
 740        if (IS_ERR(fp)) {
 741                fc_rport_error_retry(rdata, fp);
 742                goto err;
 743        }
 744
 745        op = fc_frame_payload_op(fp);
 746        if (op != ELS_LS_ACC)
 747                FC_RPORT_DBG(rdata, "Bad ELS response op %x for LOGO command\n",
 748                             op);
 749        fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
 750
 751out:
 752        fc_frame_free(fp);
 753err:
 754        mutex_unlock(&rdata->rp_mutex);
 755        kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
 756}
 757
 758/**
 759 * fc_rport_enter_prli() - Send Process Login (PRLI) request to peer
 760 * @rdata: private remote port data
 761 *
 762 * Locking Note: The rport lock is expected to be held before calling
 763 * this routine.
 764 */
 765static void fc_rport_enter_prli(struct fc_rport_priv *rdata)
 766{
 767        struct fc_lport *lport = rdata->local_port;
 768        struct {
 769                struct fc_els_prli prli;
 770                struct fc_els_spp spp;
 771        } *pp;
 772        struct fc_frame *fp;
 773
 774        /*
 775         * If the rport is one of the well known addresses
 776         * we skip PRLI and RTV and go straight to READY.
 777         */
 778        if (rdata->ids.port_id >= FC_FID_DOM_MGR) {
 779                fc_rport_enter_ready(rdata);
 780                return;
 781        }
 782
 783        FC_RPORT_DBG(rdata, "Port entered PRLI state from %s state\n",
 784                     fc_rport_state(rdata));
 785
 786        fc_rport_state_enter(rdata, RPORT_ST_PRLI);
 787
 788        fp = fc_frame_alloc(lport, sizeof(*pp));
 789        if (!fp) {
 790                fc_rport_error_retry(rdata, fp);
 791                return;
 792        }
 793
 794        if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PRLI,
 795                                  fc_rport_prli_resp, rdata, lport->e_d_tov))
 796                fc_rport_error_retry(rdata, fp);
 797        else
 798                kref_get(&rdata->kref);
 799}
 800
 801/**
 802 * fc_rport_els_rtv_resp() - Request Timeout Value response handler
 803 * @sp: current sequence in the RTV exchange
 804 * @fp: response frame
 805 * @rdata_arg: private remote port data
 806 *
 807 * Many targets don't seem to support this.
 808 *
 809 * Locking Note: This function will be called without the rport lock
 810 * held, but it will lock, call an _enter_* function or fc_rport_error
 811 * and then unlock the rport.
 812 */
 813static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
 814                              void *rdata_arg)
 815{
 816        struct fc_rport_priv *rdata = rdata_arg;
 817        u8 op;
 818
 819        mutex_lock(&rdata->rp_mutex);
 820
 821        FC_RPORT_DBG(rdata, "Received a RTV %s\n", fc_els_resp_type(fp));
 822
 823        if (rdata->rp_state != RPORT_ST_RTV) {
 824                FC_RPORT_DBG(rdata, "Received a RTV response, but in state "
 825                             "%s\n", fc_rport_state(rdata));
 826                if (IS_ERR(fp))
 827                        goto err;
 828                goto out;
 829        }
 830
 831        if (IS_ERR(fp)) {
 832                fc_rport_error(rdata, fp);
 833                goto err;
 834        }
 835
 836        op = fc_frame_payload_op(fp);
 837        if (op == ELS_LS_ACC) {
 838                struct fc_els_rtv_acc *rtv;
 839                u32 toq;
 840                u32 tov;
 841
 842                rtv = fc_frame_payload_get(fp, sizeof(*rtv));
 843                if (rtv) {
 844                        toq = ntohl(rtv->rtv_toq);
 845                        tov = ntohl(rtv->rtv_r_a_tov);
 846                        if (tov == 0)
 847                                tov = 1;
 848                        rdata->r_a_tov = tov;
 849                        tov = ntohl(rtv->rtv_e_d_tov);
 850                        if (toq & FC_ELS_RTV_EDRES)
 851                                tov /= 1000000;
 852                        if (tov == 0)
 853                                tov = 1;
 854                        rdata->e_d_tov = tov;
 855                }
 856        }
 857
 858        fc_rport_enter_ready(rdata);
 859
 860out:
 861        fc_frame_free(fp);
 862err:
 863        mutex_unlock(&rdata->rp_mutex);
 864        kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
 865}
 866
 867/**
 868 * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request to peer
 869 * @rdata: private remote port data
 870 *
 871 * Locking Note: The rport lock is expected to be held before calling
 872 * this routine.
 873 */
 874static void fc_rport_enter_rtv(struct fc_rport_priv *rdata)
 875{
 876        struct fc_frame *fp;
 877        struct fc_lport *lport = rdata->local_port;
 878
 879        FC_RPORT_DBG(rdata, "Port entered RTV state from %s state\n",
 880                     fc_rport_state(rdata));
 881
 882        fc_rport_state_enter(rdata, RPORT_ST_RTV);
 883
 884        fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
 885        if (!fp) {
 886                fc_rport_error_retry(rdata, fp);
 887                return;
 888        }
 889
 890        if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_RTV,
 891                                     fc_rport_rtv_resp, rdata, lport->e_d_tov))
 892                fc_rport_error_retry(rdata, fp);
 893        else
 894                kref_get(&rdata->kref);
 895}
 896
 897/**
 898 * fc_rport_enter_logo() - Send Logout (LOGO) request to peer
 899 * @rdata: private remote port data
 900 *
 901 * Locking Note: The rport lock is expected to be held before calling
 902 * this routine.
 903 */
 904static void fc_rport_enter_logo(struct fc_rport_priv *rdata)
 905{
 906        struct fc_lport *lport = rdata->local_port;
 907        struct fc_frame *fp;
 908
 909        FC_RPORT_DBG(rdata, "Port entered LOGO state from %s state\n",
 910                     fc_rport_state(rdata));
 911
 912        fc_rport_state_enter(rdata, RPORT_ST_LOGO);
 913
 914        fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
 915        if (!fp) {
 916                fc_rport_error_retry(rdata, fp);
 917                return;
 918        }
 919
 920        if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_LOGO,
 921                                  fc_rport_logo_resp, rdata, lport->e_d_tov))
 922                fc_rport_error_retry(rdata, fp);
 923        else
 924                kref_get(&rdata->kref);
 925}
 926
 927/**
 928 * fc_rport_els_adisc_resp() - Address Discovery response handler
 929 * @sp: current sequence in the ADISC exchange
 930 * @fp: response frame
 931 * @rdata_arg: remote port private.
 932 *
 933 * Locking Note: This function will be called without the rport lock
 934 * held, but it will lock, call an _enter_* function or fc_rport_error
 935 * and then unlock the rport.
 936 */
 937static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp,
 938                              void *rdata_arg)
 939{
 940        struct fc_rport_priv *rdata = rdata_arg;
 941        struct fc_els_adisc *adisc;
 942        u8 op;
 943
 944        mutex_lock(&rdata->rp_mutex);
 945
 946        FC_RPORT_DBG(rdata, "Received a ADISC response\n");
 947
 948        if (rdata->rp_state != RPORT_ST_ADISC) {
 949                FC_RPORT_DBG(rdata, "Received a ADISC resp but in state %s\n",
 950                             fc_rport_state(rdata));
 951                if (IS_ERR(fp))
 952                        goto err;
 953                goto out;
 954        }
 955
 956        if (IS_ERR(fp)) {
 957                fc_rport_error(rdata, fp);
 958                goto err;
 959        }
 960
 961        /*
 962         * If address verification failed.  Consider us logged out of the rport.
 963         * Since the rport is still in discovery, we want to be
 964         * logged in, so go to PLOGI state.  Otherwise, go back to READY.
 965         */
 966        op = fc_frame_payload_op(fp);
 967        adisc = fc_frame_payload_get(fp, sizeof(*adisc));
 968        if (op != ELS_LS_ACC || !adisc ||
 969            ntoh24(adisc->adisc_port_id) != rdata->ids.port_id ||
 970            get_unaligned_be64(&adisc->adisc_wwpn) != rdata->ids.port_name ||
 971            get_unaligned_be64(&adisc->adisc_wwnn) != rdata->ids.node_name) {
 972                FC_RPORT_DBG(rdata, "ADISC error or mismatch\n");
 973                fc_rport_enter_plogi(rdata);
 974        } else {
 975                FC_RPORT_DBG(rdata, "ADISC OK\n");
 976                fc_rport_enter_ready(rdata);
 977        }
 978out:
 979        fc_frame_free(fp);
 980err:
 981        mutex_unlock(&rdata->rp_mutex);
 982        kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
 983}
 984
 985/**
 986 * fc_rport_enter_adisc() - Send Address Discover (ADISC) request to peer
 987 * @rdata: remote port private data
 988 *
 989 * Locking Note: The rport lock is expected to be held before calling
 990 * this routine.
 991 */
 992static void fc_rport_enter_adisc(struct fc_rport_priv *rdata)
 993{
 994        struct fc_lport *lport = rdata->local_port;
 995        struct fc_frame *fp;
 996
 997        FC_RPORT_DBG(rdata, "sending ADISC from %s state\n",
 998                     fc_rport_state(rdata));
 999
1000        fc_rport_state_enter(rdata, RPORT_ST_ADISC);
1001
1002        fp = fc_frame_alloc(lport, sizeof(struct fc_els_adisc));
1003        if (!fp) {
1004                fc_rport_error_retry(rdata, fp);
1005                return;
1006        }
1007        if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC,
1008                                  fc_rport_adisc_resp, rdata, lport->e_d_tov))
1009                fc_rport_error_retry(rdata, fp);
1010        else
1011                kref_get(&rdata->kref);
1012}
1013
1014/**
1015 * fc_rport_recv_adisc_req() - Handle incoming Address Discovery (ADISC) Request
1016 * @rdata: remote port private
1017 * @sp: current sequence in the ADISC exchange
1018 * @in_fp: ADISC request frame
1019 *
1020 * Locking Note:  Called with the lport and rport locks held.
1021 */
1022static void fc_rport_recv_adisc_req(struct fc_rport_priv *rdata,
1023                                    struct fc_seq *sp, struct fc_frame *in_fp)
1024{
1025        struct fc_lport *lport = rdata->local_port;
1026        struct fc_frame *fp;
1027        struct fc_exch *ep = fc_seq_exch(sp);
1028        struct fc_els_adisc *adisc;
1029        struct fc_seq_els_data rjt_data;
1030        u32 f_ctl;
1031
1032        FC_RPORT_DBG(rdata, "Received ADISC request\n");
1033
1034        adisc = fc_frame_payload_get(in_fp, sizeof(*adisc));
1035        if (!adisc) {
1036                rjt_data.fp = NULL;
1037                rjt_data.reason = ELS_RJT_PROT;
1038                rjt_data.explan = ELS_EXPL_INV_LEN;
1039                lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
1040                goto drop;
1041        }
1042
1043        fp = fc_frame_alloc(lport, sizeof(*adisc));
1044        if (!fp)
1045                goto drop;
1046        fc_adisc_fill(lport, fp);
1047        adisc = fc_frame_payload_get(fp, sizeof(*adisc));
1048        adisc->adisc_cmd = ELS_LS_ACC;
1049        sp = lport->tt.seq_start_next(sp);
1050        f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT;
1051        fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
1052                       FC_TYPE_ELS, f_ctl, 0);
1053        lport->tt.seq_send(lport, sp, fp);
1054drop:
1055        fc_frame_free(in_fp);
1056}
1057
1058/**
1059 * fc_rport_recv_els_req() - handle a validated ELS request.
1060 * @lport: Fibre Channel local port
1061 * @sp: current sequence in the PLOGI exchange
1062 * @fp: response frame
1063 *
1064 * Handle incoming ELS requests that require port login.
1065 * The ELS opcode has already been validated by the caller.
1066 *
1067 * Locking Note: Called with the lport lock held.
1068 */
1069static void fc_rport_recv_els_req(struct fc_lport *lport,
1070                                  struct fc_seq *sp, struct fc_frame *fp)
1071{
1072        struct fc_rport_priv *rdata;
1073        struct fc_frame_header *fh;
1074        struct fc_seq_els_data els_data;
1075
1076        els_data.fp = NULL;
1077        els_data.reason = ELS_RJT_UNAB;
1078        els_data.explan = ELS_EXPL_PLOGI_REQD;
1079
1080        fh = fc_frame_header_get(fp);
1081
1082        mutex_lock(&lport->disc.disc_mutex);
1083        rdata = lport->tt.rport_lookup(lport, ntoh24(fh->fh_s_id));
1084        if (!rdata) {
1085                mutex_unlock(&lport->disc.disc_mutex);
1086                goto reject;
1087        }
1088        mutex_lock(&rdata->rp_mutex);
1089        mutex_unlock(&lport->disc.disc_mutex);
1090
1091        switch (rdata->rp_state) {
1092        case RPORT_ST_PRLI:
1093        case RPORT_ST_RTV:
1094        case RPORT_ST_READY:
1095        case RPORT_ST_ADISC:
1096                break;
1097        default:
1098                mutex_unlock(&rdata->rp_mutex);
1099                goto reject;
1100        }
1101
1102        switch (fc_frame_payload_op(fp)) {
1103        case ELS_PRLI:
1104                fc_rport_recv_prli_req(rdata, sp, fp);
1105                break;
1106        case ELS_PRLO:
1107                fc_rport_recv_prlo_req(rdata, sp, fp);
1108                break;
1109        case ELS_ADISC:
1110                fc_rport_recv_adisc_req(rdata, sp, fp);
1111                break;
1112        case ELS_RRQ:
1113                els_data.fp = fp;
1114                lport->tt.seq_els_rsp_send(sp, ELS_RRQ, &els_data);
1115                break;
1116        case ELS_REC:
1117                els_data.fp = fp;
1118                lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data);
1119                break;
1120        default:
1121                fc_frame_free(fp);      /* can't happen */
1122                break;
1123        }
1124
1125        mutex_unlock(&rdata->rp_mutex);
1126        return;
1127
1128reject:
1129        lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data);
1130        fc_frame_free(fp);
1131}
1132
1133/**
1134 * fc_rport_recv_req() - Handle a received ELS request from a rport
1135 * @sp: current sequence in the PLOGI exchange
1136 * @fp: response frame
1137 * @lport: Fibre Channel local port
1138 *
1139 * Locking Note: Called with the lport lock held.
1140 */
1141void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp,
1142                       struct fc_lport *lport)
1143{
1144        struct fc_seq_els_data els_data;
1145
1146        /*
1147         * Handle PLOGI and LOGO requests separately, since they
1148         * don't require prior login.
1149         * Check for unsupported opcodes first and reject them.
1150         * For some ops, it would be incorrect to reject with "PLOGI required".
1151         */
1152        switch (fc_frame_payload_op(fp)) {
1153        case ELS_PLOGI:
1154                fc_rport_recv_plogi_req(lport, sp, fp);
1155                break;
1156        case ELS_LOGO:
1157                fc_rport_recv_logo_req(lport, sp, fp);
1158                break;
1159        case ELS_PRLI:
1160        case ELS_PRLO:
1161        case ELS_ADISC:
1162        case ELS_RRQ:
1163        case ELS_REC:
1164                fc_rport_recv_els_req(lport, sp, fp);
1165                break;
1166        default:
1167                fc_frame_free(fp);
1168                els_data.fp = NULL;
1169                els_data.reason = ELS_RJT_UNSUP;
1170                els_data.explan = ELS_EXPL_NONE;
1171                lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data);
1172                break;
1173        }
1174}
1175
1176/**
1177 * fc_rport_recv_plogi_req() - Handle incoming Port Login (PLOGI) request
1178 * @lport: local port
1179 * @sp: current sequence in the PLOGI exchange
1180 * @fp: PLOGI request frame
1181 *
1182 * Locking Note: The rport lock is held before calling this function.
1183 */
1184static void fc_rport_recv_plogi_req(struct fc_lport *lport,
1185                                    struct fc_seq *sp, struct fc_frame *rx_fp)
1186{
1187        struct fc_disc *disc;
1188        struct fc_rport_priv *rdata;
1189        struct fc_frame *fp = rx_fp;
1190        struct fc_exch *ep;
1191        struct fc_frame_header *fh;
1192        struct fc_els_flogi *pl;
1193        struct fc_seq_els_data rjt_data;
1194        u32 sid, f_ctl;
1195
1196        rjt_data.fp = NULL;
1197        fh = fc_frame_header_get(fp);
1198        sid = ntoh24(fh->fh_s_id);
1199
1200        FC_RPORT_ID_DBG(lport, sid, "Received PLOGI request\n");
1201
1202        pl = fc_frame_payload_get(fp, sizeof(*pl));
1203        if (!pl) {
1204                FC_RPORT_ID_DBG(lport, sid, "Received PLOGI too short\n");
1205                rjt_data.reason = ELS_RJT_PROT;
1206                rjt_data.explan = ELS_EXPL_INV_LEN;
1207                goto reject;
1208        }
1209
1210        disc = &lport->disc;
1211        mutex_lock(&disc->disc_mutex);
1212        rdata = lport->tt.rport_create(lport, sid);
1213        if (!rdata) {
1214                mutex_unlock(&disc->disc_mutex);
1215                rjt_data.reason = ELS_RJT_UNAB;
1216                rjt_data.explan = ELS_EXPL_INSUF_RES;
1217                goto reject;
1218        }
1219
1220        mutex_lock(&rdata->rp_mutex);
1221        mutex_unlock(&disc->disc_mutex);
1222
1223        rdata->ids.port_name = get_unaligned_be64(&pl->fl_wwpn);
1224        rdata->ids.node_name = get_unaligned_be64(&pl->fl_wwnn);
1225
1226        /*
1227         * If the rport was just created, possibly due to the incoming PLOGI,
1228         * set the state appropriately and accept the PLOGI.
1229         *
1230         * If we had also sent a PLOGI, and if the received PLOGI is from a
1231         * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason
1232         * "command already in progress".
1233         *
1234         * XXX TBD: If the session was ready before, the PLOGI should result in
1235         * all outstanding exchanges being reset.
1236         */
1237        switch (rdata->rp_state) {
1238        case RPORT_ST_INIT:
1239                FC_RPORT_DBG(rdata, "Received PLOGI in INIT state\n");
1240                break;
1241        case RPORT_ST_PLOGI:
1242                FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI state\n");
1243                if (rdata->ids.port_name < lport->wwpn) {
1244                        mutex_unlock(&rdata->rp_mutex);
1245                        rjt_data.reason = ELS_RJT_INPROG;
1246                        rjt_data.explan = ELS_EXPL_NONE;
1247                        goto reject;
1248                }
1249                break;
1250        case RPORT_ST_PRLI:
1251        case RPORT_ST_READY:
1252        case RPORT_ST_ADISC:
1253                FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d "
1254                             "- ignored for now\n", rdata->rp_state);
1255                /* XXX TBD - should reset */
1256                break;
1257        case RPORT_ST_DELETE:
1258        default:
1259                FC_RPORT_DBG(rdata, "Received PLOGI in unexpected state %d\n",
1260                             rdata->rp_state);
1261                fc_frame_free(rx_fp);
1262                goto out;
1263        }
1264
1265        /*
1266         * Get session payload size from incoming PLOGI.
1267         */
1268        rdata->maxframe_size = fc_plogi_get_maxframe(pl, lport->mfs);
1269        fc_frame_free(rx_fp);
1270
1271        /*
1272         * Send LS_ACC.  If this fails, the originator should retry.
1273         */
1274        sp = lport->tt.seq_start_next(sp);
1275        if (!sp)
1276                goto out;
1277        fp = fc_frame_alloc(lport, sizeof(*pl));
1278        if (!fp)
1279                goto out;
1280
1281        fc_plogi_fill(lport, fp, ELS_LS_ACC);
1282        f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT;
1283        ep = fc_seq_exch(sp);
1284        fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
1285                       FC_TYPE_ELS, f_ctl, 0);
1286        lport->tt.seq_send(lport, sp, fp);
1287        fc_rport_enter_prli(rdata);
1288out:
1289        mutex_unlock(&rdata->rp_mutex);
1290        return;
1291
1292reject:
1293        lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
1294        fc_frame_free(fp);
1295}
1296
1297/**
1298 * fc_rport_recv_prli_req() - Handle incoming Process Login (PRLI) request
1299 * @rdata: private remote port data
1300 * @sp: current sequence in the PRLI exchange
1301 * @fp: PRLI request frame
1302 *
1303 * Locking Note: The rport lock is exected to be held before calling
1304 * this function.
1305 */
1306static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
1307                                   struct fc_seq *sp, struct fc_frame *rx_fp)
1308{
1309        struct fc_lport *lport = rdata->local_port;
1310        struct fc_exch *ep;
1311        struct fc_frame *fp;
1312        struct fc_frame_header *fh;
1313        struct {
1314                struct fc_els_prli prli;
1315                struct fc_els_spp spp;
1316        } *pp;
1317        struct fc_els_spp *rspp;        /* request service param page */
1318        struct fc_els_spp *spp; /* response spp */
1319        unsigned int len;
1320        unsigned int plen;
1321        enum fc_els_rjt_reason reason = ELS_RJT_UNAB;
1322        enum fc_els_rjt_explan explan = ELS_EXPL_NONE;
1323        enum fc_els_spp_resp resp;
1324        struct fc_seq_els_data rjt_data;
1325        u32 f_ctl;
1326        u32 fcp_parm;
1327        u32 roles = FC_RPORT_ROLE_UNKNOWN;
1328        rjt_data.fp = NULL;
1329
1330        fh = fc_frame_header_get(rx_fp);
1331
1332        FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n",
1333                     fc_rport_state(rdata));
1334
1335        switch (rdata->rp_state) {
1336        case RPORT_ST_PRLI:
1337        case RPORT_ST_RTV:
1338        case RPORT_ST_READY:
1339        case RPORT_ST_ADISC:
1340                reason = ELS_RJT_NONE;
1341                break;
1342        default:
1343                fc_frame_free(rx_fp);
1344                return;
1345                break;
1346        }
1347        len = fr_len(rx_fp) - sizeof(*fh);
1348        pp = fc_frame_payload_get(rx_fp, sizeof(*pp));
1349        if (pp == NULL) {
1350                reason = ELS_RJT_PROT;
1351                explan = ELS_EXPL_INV_LEN;
1352        } else {
1353                plen = ntohs(pp->prli.prli_len);
1354                if ((plen % 4) != 0 || plen > len) {
1355                        reason = ELS_RJT_PROT;
1356                        explan = ELS_EXPL_INV_LEN;
1357                } else if (plen < len) {
1358                        len = plen;
1359                }
1360                plen = pp->prli.prli_spp_len;
1361                if ((plen % 4) != 0 || plen < sizeof(*spp) ||
1362                    plen > len || len < sizeof(*pp)) {
1363                        reason = ELS_RJT_PROT;
1364                        explan = ELS_EXPL_INV_LEN;
1365                }
1366                rspp = &pp->spp;
1367        }
1368        if (reason != ELS_RJT_NONE ||
1369            (fp = fc_frame_alloc(lport, len)) == NULL) {
1370                rjt_data.reason = reason;
1371                rjt_data.explan = explan;
1372                lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
1373        } else {
1374                sp = lport->tt.seq_start_next(sp);
1375                WARN_ON(!sp);
1376                pp = fc_frame_payload_get(fp, len);
1377                WARN_ON(!pp);
1378                memset(pp, 0, len);
1379                pp->prli.prli_cmd = ELS_LS_ACC;
1380                pp->prli.prli_spp_len = plen;
1381                pp->prli.prli_len = htons(len);
1382                len -= sizeof(struct fc_els_prli);
1383
1384                /* reinitialize remote port roles */
1385                rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
1386
1387                /*
1388                 * Go through all the service parameter pages and build
1389                 * response.  If plen indicates longer SPP than standard,
1390                 * use that.  The entire response has been pre-cleared above.
1391                 */
1392                spp = &pp->spp;
1393                while (len >= plen) {
1394                        spp->spp_type = rspp->spp_type;
1395                        spp->spp_type_ext = rspp->spp_type_ext;
1396                        spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
1397                        resp = FC_SPP_RESP_ACK;
1398                        if (rspp->spp_flags & FC_SPP_RPA_VAL)
1399                                resp = FC_SPP_RESP_NO_PA;
1400                        switch (rspp->spp_type) {
1401                        case 0: /* common to all FC-4 types */
1402                                break;
1403                        case FC_TYPE_FCP:
1404                                fcp_parm = ntohl(rspp->spp_params);
1405                                if (fcp_parm * FCP_SPPF_RETRY)
1406                                        rdata->flags |= FC_RP_FLAGS_RETRY;
1407                                rdata->supported_classes = FC_COS_CLASS3;
1408                                if (fcp_parm & FCP_SPPF_INIT_FCN)
1409                                        roles |= FC_RPORT_ROLE_FCP_INITIATOR;
1410                                if (fcp_parm & FCP_SPPF_TARG_FCN)
1411                                        roles |= FC_RPORT_ROLE_FCP_TARGET;
1412                                rdata->ids.roles = roles;
1413
1414                                spp->spp_params =
1415                                        htonl(lport->service_params);
1416                                break;
1417                        default:
1418                                resp = FC_SPP_RESP_INVL;
1419                                break;
1420                        }
1421                        spp->spp_flags |= resp;
1422                        len -= plen;
1423                        rspp = (struct fc_els_spp *)((char *)rspp + plen);
1424                        spp = (struct fc_els_spp *)((char *)spp + plen);
1425                }
1426
1427                /*
1428                 * Send LS_ACC.  If this fails, the originator should retry.
1429                 */
1430                f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ;
1431                f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT;
1432                ep = fc_seq_exch(sp);
1433                fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
1434                               FC_TYPE_ELS, f_ctl, 0);
1435                lport->tt.seq_send(lport, sp, fp);
1436
1437                /*
1438                 * Get lock and re-check state.
1439                 */
1440                switch (rdata->rp_state) {
1441                case RPORT_ST_PRLI:
1442                        fc_rport_enter_ready(rdata);
1443                        break;
1444                case RPORT_ST_READY:
1445                case RPORT_ST_ADISC:
1446                        break;
1447                default:
1448                        break;
1449                }
1450        }
1451        fc_frame_free(rx_fp);
1452}
1453
1454/**
1455 * fc_rport_recv_prlo_req() - Handle incoming Process Logout (PRLO) request
1456 * @rdata: private remote port data
1457 * @sp: current sequence in the PRLO exchange
1458 * @fp: PRLO request frame
1459 *
1460 * Locking Note: The rport lock is exected to be held before calling
1461 * this function.
1462 */
1463static void fc_rport_recv_prlo_req(struct fc_rport_priv *rdata,
1464                                   struct fc_seq *sp,
1465                                   struct fc_frame *fp)
1466{
1467        struct fc_lport *lport = rdata->local_port;
1468
1469        struct fc_frame_header *fh;
1470        struct fc_seq_els_data rjt_data;
1471
1472        fh = fc_frame_header_get(fp);
1473
1474        FC_RPORT_DBG(rdata, "Received PRLO request while in state %s\n",
1475                     fc_rport_state(rdata));
1476
1477        rjt_data.fp = NULL;
1478        rjt_data.reason = ELS_RJT_UNAB;
1479        rjt_data.explan = ELS_EXPL_NONE;
1480        lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
1481        fc_frame_free(fp);
1482}
1483
1484/**
1485 * fc_rport_recv_logo_req() - Handle incoming Logout (LOGO) request
1486 * @lport: local port.
1487 * @sp: current sequence in the LOGO exchange
1488 * @fp: LOGO request frame
1489 *
1490 * Locking Note: The rport lock is exected to be held before calling
1491 * this function.
1492 */
1493static void fc_rport_recv_logo_req(struct fc_lport *lport,
1494                                   struct fc_seq *sp,
1495                                   struct fc_frame *fp)
1496{
1497        struct fc_frame_header *fh;
1498        struct fc_rport_priv *rdata;
1499        u32 sid;
1500
1501        lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
1502
1503        fh = fc_frame_header_get(fp);
1504        sid = ntoh24(fh->fh_s_id);
1505
1506        mutex_lock(&lport->disc.disc_mutex);
1507        rdata = lport->tt.rport_lookup(lport, sid);
1508        if (rdata) {
1509                mutex_lock(&rdata->rp_mutex);
1510                FC_RPORT_DBG(rdata, "Received LOGO request while in state %s\n",
1511                             fc_rport_state(rdata));
1512
1513                /*
1514                 * If the remote port was created due to discovery,
1515                 * log back in.  It may have seen a stale RSCN about us.
1516                 */
1517                if (rdata->rp_state != RPORT_ST_DELETE && rdata->disc_id)
1518                        fc_rport_enter_plogi(rdata);
1519                else
1520                        fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
1521                mutex_unlock(&rdata->rp_mutex);
1522        } else
1523                FC_RPORT_ID_DBG(lport, sid,
1524                                "Received LOGO from non-logged-in port\n");
1525        mutex_unlock(&lport->disc.disc_mutex);
1526        fc_frame_free(fp);
1527}
1528
1529static void fc_rport_flush_queue(void)
1530{
1531        flush_workqueue(rport_event_queue);
1532}
1533
1534int fc_rport_init(struct fc_lport *lport)
1535{
1536        if (!lport->tt.rport_lookup)
1537                lport->tt.rport_lookup = fc_rport_lookup;
1538
1539        if (!lport->tt.rport_create)
1540                lport->tt.rport_create = fc_rport_create;
1541
1542        if (!lport->tt.rport_login)
1543                lport->tt.rport_login = fc_rport_login;
1544
1545        if (!lport->tt.rport_logoff)
1546                lport->tt.rport_logoff = fc_rport_logoff;
1547
1548        if (!lport->tt.rport_recv_req)
1549                lport->tt.rport_recv_req = fc_rport_recv_req;
1550
1551        if (!lport->tt.rport_flush_queue)
1552                lport->tt.rport_flush_queue = fc_rport_flush_queue;
1553
1554        if (!lport->tt.rport_destroy)
1555                lport->tt.rport_destroy = fc_rport_destroy;
1556
1557        return 0;
1558}
1559EXPORT_SYMBOL(fc_rport_init);
1560
1561int fc_setup_rport(void)
1562{
1563        rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
1564        if (!rport_event_queue)
1565                return -ENOMEM;
1566        return 0;
1567}
1568EXPORT_SYMBOL(fc_setup_rport);
1569
1570void fc_destroy_rport(void)
1571{
1572        destroy_workqueue(rport_event_queue);
1573}
1574EXPORT_SYMBOL(fc_destroy_rport);
1575
1576void fc_rport_terminate_io(struct fc_rport *rport)
1577{
1578        struct fc_rport_libfc_priv *rp = rport->dd_data;
1579        struct fc_lport *lport = rp->local_port;
1580
1581        lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
1582        lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
1583}
1584EXPORT_SYMBOL(fc_rport_terminate_io);
1585