1/* 2 * 3 * Includes for cdc-acm.c 4 * 5 * Mainly take from usbnet's cdc-ether part 6 * 7 */ 8 9/* 10 * CMSPAR, some architectures can't have space and mark parity. 11 */ 12 13#ifndef CMSPAR 14#define CMSPAR 0 15#endif 16 17/* 18 * Major and minor numbers. 19 */ 20 21#define ACM_TTY_MAJOR 166 22#define ACM_TTY_MINORS 32 23 24/* 25 * Requests. 26 */ 27 28#define USB_RT_ACM (USB_TYPE_CLASS | USB_RECIP_INTERFACE) 29 30/* 31 * Output control lines. 32 */ 33 34#define ACM_CTRL_DTR 0x01 35#define ACM_CTRL_RTS 0x02 36 37/* 38 * Input control lines and line errors. 39 */ 40 41#define ACM_CTRL_DCD 0x01 42#define ACM_CTRL_DSR 0x02 43#define ACM_CTRL_BRK 0x04 44#define ACM_CTRL_RI 0x08 45 46#define ACM_CTRL_FRAMING 0x10 47#define ACM_CTRL_PARITY 0x20 48#define ACM_CTRL_OVERRUN 0x40 49 50/* 51 * Internal driver structures. 52 */ 53 54/* 55 * The only reason to have several buffers is to accomodate assumptions 56 * in line disciplines. They ask for empty space amount, receive our URB size, 57 * and proceed to issue several 1-character writes, assuming they will fit. 58 * The very first write takes a complete URB. Fortunately, this only happens 59 * when processing onlcr, so we only need 2 buffers. These values must be 60 * powers of 2. 61 */ 62#define ACM_NW 16 63#define ACM_NR 16 64 65struct acm_wb { 66 unsigned char *buf; 67 dma_addr_t dmah; 68 int len; 69 int use; 70 struct urb *urb; 71 struct acm *instance; 72}; 73 74struct acm_rb { 75 struct list_head list; 76 int size; 77 unsigned char *base; 78 dma_addr_t dma; 79}; 80 81struct acm_ru { 82 struct list_head list; 83 struct acm_rb *buffer; 84 struct urb *urb; 85 struct acm *instance; 86}; 87 88struct acm { 89 struct usb_device *dev; /* the corresponding usb device */ 90 struct usb_interface *control; /* control interface */ 91 struct usb_interface *data; /* data interface */ 92 struct tty_port port; /* our tty port data */ 93 struct urb *ctrlurb; /* urbs */ 94 u8 *ctrl_buffer; /* buffers of urbs */ 95 dma_addr_t ctrl_dma; /* dma handles of buffers */ 96 u8 *country_codes; /* country codes from device */ 97 unsigned int country_code_size; /* size of this buffer */ 98 unsigned int country_rel_date; /* release date of version */ 99 struct acm_wb wb[ACM_NW]; 100 struct acm_ru ru[ACM_NR]; 101 struct acm_rb rb[ACM_NR]; 102 int rx_buflimit; 103 int rx_endpoint; 104 spinlock_t read_lock; 105 struct list_head spare_read_urbs; 106 struct list_head spare_read_bufs; 107 struct list_head filled_read_bufs; 108 int write_used; /* number of non-empty write buffers */ 109 int processing; 110 int transmitting; 111 spinlock_t write_lock; 112 struct mutex mutex; 113 struct usb_cdc_line_coding line; /* bits, stop, parity */ 114 struct work_struct work; /* work queue entry for line discipline waking up */ 115 struct work_struct waker; 116 wait_queue_head_t drain_wait; /* close processing */ 117 struct tasklet_struct urb_task; /* rx processing */ 118 spinlock_t throttle_lock; /* synchronize throtteling and read callback */ 119 unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */ 120 unsigned int ctrlout; /* output control lines (DTR, RTS) */ 121 unsigned int writesize; /* max packet size for the output bulk endpoint */ 122 unsigned int readsize,ctrlsize; /* buffer sizes for freeing */ 123 unsigned int minor; /* acm minor number */ 124 unsigned char throttle; /* throttled by tty layer */ 125 unsigned char clocal; /* termios CLOCAL */ 126 unsigned int ctrl_caps; /* control capabilities from the class specific header */ 127 unsigned int susp_count; /* number of suspended interfaces */ 128 int combined_interfaces:1; /* control and data collapsed */ 129 int is_int_ep:1; /* interrupt endpoints contrary to spec used */ 130 u8 bInterval; 131 struct acm_wb *delayed_wb; /* write queued for a device about to be woken */ 132}; 133 134#define CDC_DATA_INTERFACE_TYPE 0x0a 135 136/* constants describing various quirks and errors */ 137#define NO_UNION_NORMAL 1 138#define SINGLE_RX_URB 2 139#define NO_CAP_LINE 4 140