1#ifndef __LINUX_HUB_H 2#define __LINUX_HUB_H 3 4/* 5 * Hub protocol and driver data structures. 6 * 7 * Some of these are known to the "virtual root hub" code 8 * in host controller drivers. 9 */ 10 11#include <linux/list.h> 12#include <linux/workqueue.h> 13#include <linux/compiler.h> /* likely()/unlikely() */ 14 15/* 16 * Hub request types 17 */ 18 19#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) 20#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) 21 22/* 23 * Hub class requests 24 * See USB 2.0 spec Table 11-16 25 */ 26#define HUB_CLEAR_TT_BUFFER 8 27#define HUB_RESET_TT 9 28#define HUB_GET_TT_STATE 10 29#define HUB_STOP_TT 11 30 31/* 32 * Hub Class feature numbers 33 * See USB 2.0 spec Table 11-17 34 */ 35#define C_HUB_LOCAL_POWER 0 36#define C_HUB_OVER_CURRENT 1 37 38/* 39 * Port feature numbers 40 * See USB 2.0 spec Table 11-17 41 */ 42#define USB_PORT_FEAT_CONNECTION 0 43#define USB_PORT_FEAT_ENABLE 1 44#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ 45#define USB_PORT_FEAT_OVER_CURRENT 3 46#define USB_PORT_FEAT_RESET 4 47#define USB_PORT_FEAT_L1 5 /* L1 suspend */ 48#define USB_PORT_FEAT_POWER 8 49#define USB_PORT_FEAT_LOWSPEED 9 50/* This value was never in Table 11-17 */ 51#define USB_PORT_FEAT_HIGHSPEED 10 52/* This value is also fake */ 53#define USB_PORT_FEAT_SUPERSPEED 11 54#define USB_PORT_FEAT_C_CONNECTION 16 55#define USB_PORT_FEAT_C_ENABLE 17 56#define USB_PORT_FEAT_C_SUSPEND 18 57#define USB_PORT_FEAT_C_OVER_CURRENT 19 58#define USB_PORT_FEAT_C_RESET 20 59#define USB_PORT_FEAT_TEST 21 60#define USB_PORT_FEAT_INDICATOR 22 61#define USB_PORT_FEAT_C_PORT_L1 23 62 63/* 64 * Hub Status and Hub Change results 65 * See USB 2.0 spec Table 11-19 and Table 11-20 66 */ 67struct usb_port_status { 68 __le16 wPortStatus; 69 __le16 wPortChange; 70} __attribute__ ((packed)); 71 72/* 73 * wPortStatus bit field 74 * See USB 2.0 spec Table 11-21 75 */ 76#define USB_PORT_STAT_CONNECTION 0x0001 77#define USB_PORT_STAT_ENABLE 0x0002 78#define USB_PORT_STAT_SUSPEND 0x0004 79#define USB_PORT_STAT_OVERCURRENT 0x0008 80#define USB_PORT_STAT_RESET 0x0010 81#define USB_PORT_STAT_L1 0x0020 82/* bits 6 to 7 are reserved */ 83#define USB_PORT_STAT_POWER 0x0100 84#define USB_PORT_STAT_LOW_SPEED 0x0200 85#define USB_PORT_STAT_HIGH_SPEED 0x0400 86#define USB_PORT_STAT_TEST 0x0800 87#define USB_PORT_STAT_INDICATOR 0x1000 88/* bits 13 to 15 are reserved */ 89 90/* 91 * wPortChange bit field 92 * See USB 2.0 spec Table 11-22 93 * Bits 0 to 4 shown, bits 5 to 15 are reserved 94 */ 95#define USB_PORT_STAT_C_CONNECTION 0x0001 96#define USB_PORT_STAT_C_ENABLE 0x0002 97#define USB_PORT_STAT_C_SUSPEND 0x0004 98#define USB_PORT_STAT_C_OVERCURRENT 0x0008 99#define USB_PORT_STAT_C_RESET 0x0010 100#define USB_PORT_STAT_C_L1 0x0020 101 102/* 103 * wHubCharacteristics (masks) 104 * See USB 2.0 spec Table 11-13, offset 3 105 */ 106#define HUB_CHAR_LPSM 0x0003 /* D1 .. D0 */ 107#define HUB_CHAR_COMPOUND 0x0004 /* D2 */ 108#define HUB_CHAR_OCPM 0x0018 /* D4 .. D3 */ 109#define HUB_CHAR_TTTT 0x0060 /* D6 .. D5 */ 110#define HUB_CHAR_PORTIND 0x0080 /* D7 */ 111 112struct usb_hub_status { 113 __le16 wHubStatus; 114 __le16 wHubChange; 115} __attribute__ ((packed)); 116 117/* 118 * Hub Status & Hub Change bit masks 119 * See USB 2.0 spec Table 11-19 and Table 11-20 120 * Bits 0 and 1 for wHubStatus and wHubChange 121 * Bits 2 to 15 are reserved for both 122 */ 123#define HUB_STATUS_LOCAL_POWER 0x0001 124#define HUB_STATUS_OVERCURRENT 0x0002 125#define HUB_CHANGE_LOCAL_POWER 0x0001 126#define HUB_CHANGE_OVERCURRENT 0x0002 127 128 129/* 130 * Hub descriptor 131 * See USB 2.0 spec Table 11-13 132 */ 133 134#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) 135#define USB_DT_HUB_NONVAR_SIZE 7 136 137struct usb_hub_descriptor { 138 __u8 bDescLength; 139 __u8 bDescriptorType; 140 __u8 bNbrPorts; 141 __le16 wHubCharacteristics; 142 __u8 bPwrOn2PwrGood; 143 __u8 bHubContrCurrent; 144 /* add 1 bit for hub status change; round to bytes */ 145 __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; 146 __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; 147} __attribute__ ((packed)); 148 149 150/* port indicator status selectors, tables 11-7 and 11-25 */ 151#define HUB_LED_AUTO 0 152#define HUB_LED_AMBER 1 153#define HUB_LED_GREEN 2 154#define HUB_LED_OFF 3 155 156enum hub_led_mode { 157 INDICATOR_AUTO = 0, 158 INDICATOR_CYCLE, 159 /* software blinks for attention: software, hardware, reserved */ 160 INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, 161 INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, 162 INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF 163} __attribute__ ((packed)); 164 165struct usb_device; 166 167/* Transaction Translator Think Times, in bits */ 168#define HUB_TTTT_8_BITS 0x00 169#define HUB_TTTT_16_BITS 0x20 170#define HUB_TTTT_24_BITS 0x40 171#define HUB_TTTT_32_BITS 0x60 172 173/* 174 * As of USB 2.0, full/low speed devices are segregated into trees. 175 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc). 176 * The other type grows from high speed hubs when they connect to 177 * full/low speed devices using "Transaction Translators" (TTs). 178 * 179 * TTs should only be known to the hub driver, and high speed bus 180 * drivers (only EHCI for now). They affect periodic scheduling and 181 * sometimes control/bulk error recovery. 182 */ 183struct usb_tt { 184 struct usb_device *hub; /* upstream highspeed hub */ 185 int multi; /* true means one TT per port */ 186 unsigned think_time; /* think time in ns */ 187 188 /* for control/bulk error recovery (CLEAR_TT_BUFFER) */ 189 spinlock_t lock; 190 struct list_head clear_list; /* of usb_tt_clear */ 191 struct work_struct clear_work; 192}; 193 194struct usb_tt_clear { 195 struct list_head clear_list; 196 unsigned tt; 197 u16 devinfo; 198 struct usb_hcd *hcd; 199 struct usb_host_endpoint *ep; 200}; 201 202extern int usb_hub_clear_tt_buffer(struct urb *urb); 203extern void usb_ep0_reinit(struct usb_device *); 204 205#endif /* __LINUX_HUB_H */ 206