1/* 2 * include/linux/tipc_config.h: Include file for TIPC configuration interface 3 * 4 * Copyright (c) 2003-2006, Ericsson AB 5 * Copyright (c) 2005-2007, Wind River Systems 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the names of the copyright holders nor the names of its 17 * contributors may be used to endorse or promote products derived from 18 * this software without specific prior written permission. 19 * 20 * Alternatively, this software may be distributed under the terms of the 21 * GNU General Public License ("GPL") version 2 as published by the Free 22 * Software Foundation. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 34 * POSSIBILITY OF SUCH DAMAGE. 35 */ 36 37#ifndef _LINUX_TIPC_CONFIG_H_ 38#define _LINUX_TIPC_CONFIG_H_ 39 40#include <linux/types.h> 41#include <linux/string.h> 42#include <asm/byteorder.h> 43 44/* 45 * Configuration 46 * 47 * All configuration management messaging involves sending a request message 48 * to the TIPC configuration service on a node, which sends a reply message 49 * back. (In the future multi-message replies may be supported.) 50 * 51 * Both request and reply messages consist of a transport header and payload. 52 * The transport header contains info about the desired operation; 53 * the payload consists of zero or more type/length/value (TLV) items 54 * which specify parameters or results for the operation. 55 * 56 * For many operations, the request and reply messages have a fixed number 57 * of TLVs (usually zero or one); however, some reply messages may return 58 * a variable number of TLVs. A failed request is denoted by the presence 59 * of an "error string" TLV in the reply message instead of the TLV(s) the 60 * reply should contain if the request succeeds. 61 */ 62 63/* 64 * Public commands: 65 * May be issued by any process. 66 * Accepted by own node, or by remote node only if remote management enabled. 67 */ 68 69#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ 70#define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */ 71#define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ 72#define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ 73#define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */ 74#define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */ 75#define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ 76#define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */ 77 78#if 0 79#define TIPC_CMD_SHOW_PORT_STATS 0x0008 /* tx port_ref, rx ultra_string */ 80#define TIPC_CMD_RESET_PORT_STATS 0x0009 /* tx port_ref, rx none */ 81#define TIPC_CMD_GET_ROUTES 0x000A /* tx ?, rx ? */ 82#define TIPC_CMD_GET_LINK_PEER 0x000D /* tx link_name, rx ? */ 83#endif 84 85/* 86 * Protected commands: 87 * May only be issued by "network administration capable" process. 88 * Accepted by own node, or by remote node only if remote management enabled 89 * and this node is zone manager. 90 */ 91 92#define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ 93#define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ 94#define TIPC_CMD_GET_MAX_PUBL 0x4005 /* tx none, rx unsigned */ 95#define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* tx none, rx unsigned */ 96#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* tx none, rx unsigned */ 97#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* tx none, rx unsigned */ 98#define TIPC_CMD_GET_MAX_NODES 0x4009 /* tx none, rx unsigned */ 99#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* tx none, rx unsigned */ 100#define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ 101 102#define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */ 103#define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */ 104#define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ 105#define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ 106#define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ 107#define TIPC_CMD_SET_LOG_SIZE 0x410A /* tx unsigned, rx none */ 108#define TIPC_CMD_DUMP_LOG 0x410B /* tx none, rx ultra_string */ 109#define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ 110 111#if 0 112#define TIPC_CMD_CREATE_LINK 0x4103 /* tx link_create, rx none */ 113#define TIPC_CMD_REMOVE_LINK 0x4104 /* tx link_name, rx none */ 114#define TIPC_CMD_BLOCK_LINK 0x4105 /* tx link_name, rx none */ 115#define TIPC_CMD_UNBLOCK_LINK 0x4106 /* tx link_name, rx none */ 116#endif 117 118/* 119 * Private commands: 120 * May only be issued by "network administration capable" process. 121 * Accepted by own node only; cannot be used on a remote node. 122 */ 123 124#define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */ 125#if 0 126#define TIPC_CMD_SET_ZONE_MASTER 0x8002 /* tx none, rx none */ 127#endif 128#define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */ 129#define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */ 130#define TIPC_CMD_SET_MAX_PUBL 0x8005 /* tx unsigned, rx none */ 131#define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* tx unsigned, rx none */ 132#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* tx unsigned, rx none */ 133#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* tx unsigned, rx none */ 134#define TIPC_CMD_SET_MAX_NODES 0x8009 /* tx unsigned, rx none */ 135#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* tx unsigned, rx none */ 136#define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ 137 138/* 139 * Reserved commands: 140 * May not be issued by any process. 141 * Used internally by TIPC. 142 */ 143 144#define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ 145 146/* 147 * TLV types defined for TIPC 148 */ 149 150#define TIPC_TLV_NONE 0 /* no TLV present */ 151#define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/ 152#define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */ 153#define TIPC_TLV_STRING 3 /* char[128] (max) */ 154#define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */ 155#define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */ 156 157#define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */ 158#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */ 159#define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */ 160#define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */ 161#define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */ 162#define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */ 163#define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */ 164#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ 165#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ 166#define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */ 167#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ 168 169/* 170 * Maximum sizes of TIPC bearer-related names (including terminating NUL) 171 */ 172 173#define TIPC_MAX_MEDIA_NAME 16 /* format = media */ 174#define TIPC_MAX_IF_NAME 16 /* format = interface */ 175#define TIPC_MAX_BEARER_NAME 32 /* format = media:interface */ 176#define TIPC_MAX_LINK_NAME 60 /* format = Z.C.N:interface-Z.C.N:interface */ 177 178/* 179 * Link priority limits (min, default, max, media default) 180 */ 181 182#define TIPC_MIN_LINK_PRI 0 183#define TIPC_DEF_LINK_PRI 10 184#define TIPC_MAX_LINK_PRI 31 185#define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1) 186 187/* 188 * Link tolerance limits (min, default, max), in ms 189 */ 190 191#define TIPC_MIN_LINK_TOL 50 192#define TIPC_DEF_LINK_TOL 1500 193#define TIPC_MAX_LINK_TOL 30000 194 195/* 196 * Link window limits (min, default, max), in packets 197 */ 198 199#define TIPC_MIN_LINK_WIN 16 200#define TIPC_DEF_LINK_WIN 50 201#define TIPC_MAX_LINK_WIN 150 202 203 204struct tipc_node_info { 205 __be32 addr; /* network address of node */ 206 __be32 up; /* 0=down, 1= up */ 207}; 208 209struct tipc_link_info { 210 __be32 dest; /* network address of peer node */ 211 __be32 up; /* 0=down, 1=up */ 212 char str[TIPC_MAX_LINK_NAME]; /* link name */ 213}; 214 215struct tipc_bearer_config { 216 __be32 priority; /* Range [1,31]. Override per link */ 217 __be32 detect_scope; 218 char name[TIPC_MAX_BEARER_NAME]; 219}; 220 221struct tipc_link_config { 222 __be32 value; 223 char name[TIPC_MAX_LINK_NAME]; 224}; 225 226#define TIPC_NTQ_ALLTYPES 0x80000000 227 228struct tipc_name_table_query { 229 __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */ 230 __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */ 231 __be32 lowbound; /* (i.e. displays all entries of name table) */ 232 __be32 upbound; 233}; 234 235/* 236 * The error string TLV is a null-terminated string describing the cause 237 * of the request failure. To simplify error processing (and to save space) 238 * the first character of the string can be a special error code character 239 * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason. 240 */ 241 242#define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */ 243#define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */ 244#define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */ 245#define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */ 246#define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */ 247#define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */ 248 249#if 0 250/* prototypes TLV structures for proposed commands */ 251struct tipc_link_create { 252 __u32 domain; 253 struct tipc_media_addr peer_addr; 254 char bearer_name[TIPC_MAX_BEARER_NAME]; 255}; 256 257struct tipc_route_info { 258 __u32 dest; 259 __u32 router; 260}; 261#endif 262 263/* 264 * A TLV consists of a descriptor, followed by the TLV value. 265 * TLV descriptor fields are stored in network byte order; 266 * TLV values must also be stored in network byte order (where applicable). 267 * TLV descriptors must be aligned to addresses which are multiple of 4, 268 * so up to 3 bytes of padding may exist at the end of the TLV value area. 269 * There must not be any padding between the TLV descriptor and its value. 270 */ 271 272struct tlv_desc { 273 __be16 tlv_len; /* TLV length (descriptor + value) */ 274 __be16 tlv_type; /* TLV identifier */ 275}; 276 277#define TLV_ALIGNTO 4 278 279#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1)) 280#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen)) 281#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen))) 282#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0))) 283 284static inline int TLV_OK(const void *tlv, __u16 space) 285{ 286 /* 287 * Would also like to check that "tlv" is a multiple of 4, 288 * but don't know how to do this in a portable way. 289 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler 290 * won't allow binary "&" with a pointer. 291 * - Tried casting "tlv" to integer type, but causes warning about size 292 * mismatch when pointer is bigger than chosen type (int, long, ...). 293 */ 294 295 return (space >= TLV_SPACE(0)) && 296 (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); 297} 298 299static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) 300{ 301 return TLV_OK(tlv, space) && 302 (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); 303} 304 305static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) 306{ 307 struct tlv_desc *tlv_ptr; 308 int tlv_len; 309 310 tlv_len = TLV_LENGTH(len); 311 tlv_ptr = (struct tlv_desc *)tlv; 312 tlv_ptr->tlv_type = htons(type); 313 tlv_ptr->tlv_len = htons(tlv_len); 314 if (len && data) 315 memcpy(TLV_DATA(tlv_ptr), data, tlv_len); 316 return TLV_SPACE(len); 317} 318 319/* 320 * A TLV list descriptor simplifies processing of messages 321 * containing multiple TLVs. 322 */ 323 324struct tlv_list_desc { 325 struct tlv_desc *tlv_ptr; /* ptr to current TLV */ 326 __u32 tlv_space; /* # bytes from curr TLV to list end */ 327}; 328 329static inline void TLV_LIST_INIT(struct tlv_list_desc *list, 330 void *data, __u32 space) 331{ 332 list->tlv_ptr = (struct tlv_desc *)data; 333 list->tlv_space = space; 334} 335 336static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list) 337{ 338 return (list->tlv_space == 0); 339} 340 341static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type) 342{ 343 return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type); 344} 345 346static inline void *TLV_LIST_DATA(struct tlv_list_desc *list) 347{ 348 return TLV_DATA(list->tlv_ptr); 349} 350 351static inline void TLV_LIST_STEP(struct tlv_list_desc *list) 352{ 353 __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); 354 355 list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); 356 list->tlv_space -= tlv_space; 357} 358 359/* 360 * Configuration messages exchanged via NETLINK_GENERIC use the following 361 * family id, name, version and command. 362 */ 363#define TIPC_GENL_NAME "TIPC" 364#define TIPC_GENL_VERSION 0x1 365#define TIPC_GENL_CMD 0x1 366 367/* 368 * TIPC specific header used in NETLINK_GENERIC requests. 369 */ 370struct tipc_genlmsghdr { 371 __u32 dest; /* Destination address */ 372 __u16 cmd; /* Command */ 373 __u16 reserved; /* Unused */ 374}; 375 376#define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr)) 377 378/* 379 * Configuration messages exchanged via TIPC sockets use the TIPC configuration 380 * message header, which is defined below. This structure is analogous 381 * to the Netlink message header, but fields are stored in network byte order 382 * and no padding is permitted between the header and the message data 383 * that follows. 384 */ 385 386struct tipc_cfg_msg_hdr 387{ 388 __be32 tcm_len; /* Message length (including header) */ 389 __be16 tcm_type; /* Command type */ 390 __be16 tcm_flags; /* Additional flags */ 391 char tcm_reserved[8]; /* Unused */ 392}; 393 394#define TCM_F_REQUEST 0x1 /* Flag: Request message */ 395#define TCM_F_MORE 0x2 /* Flag: Message to be continued */ 396 397#define TCM_ALIGN(datalen) (((datalen)+3) & ~3) 398#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen) 399#define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen))) 400#define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0))) 401 402static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags, 403 void *data, __u16 data_len) 404{ 405 struct tipc_cfg_msg_hdr *tcm_hdr; 406 int msg_len; 407 408 msg_len = TCM_LENGTH(data_len); 409 tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; 410 tcm_hdr->tcm_len = htonl(msg_len); 411 tcm_hdr->tcm_type = htons(cmd); 412 tcm_hdr->tcm_flags = htons(flags); 413 if (data_len && data) 414 memcpy(TCM_DATA(msg), data, data_len); 415 return TCM_SPACE(data_len); 416} 417 418#endif 419