1#ifndef _SCSI_SCSI_DEVINFO_H 2#define _SCSI_SCSI_DEVINFO_H 3/* 4 * Flags for SCSI devices that need special treatment 5 */ 6#define BLIST_NOLUN 0x001 /* Only scan LUN 0 */ 7#define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning, 8 deprecated: Use max_luns=N */ 9#define BLIST_BORKEN 0x004 /* Flag for broken handshaking */ 10#define BLIST_KEY 0x008 /* unlock by special command */ 11#define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */ 12#define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */ 13#define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */ 14#define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */ 15#define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */ 16#define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */ 17#define BLIST_INQUIRY_36 0x400 /* override additional length field */ 18#define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */ 19#define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */ 20#define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */ 21#define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */ 22#define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */ 23#define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */ 24#define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs 25 (if HBA supports more than 8 LUNs) */ 26#define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */ 27#define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */ 28#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */ 29#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */ 30#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */ 31#define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */ 32#define BLIST_ATTACH_PQ3 0x1000000 /* Scan: Attach to PQ3 devices */ 33#endif 34