/*
 *      Initialisation code for Cyrix/NatSemi VSA1 softaudio
 *
 *      (C) Copyright 2003 Red Hat Inc <alan@lxorguk.ukuu.org.uk>
 *
 * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems.
 * The older version (VSA1) provides fairly good soundblaster emulation
 * although there are a couple of bugs: large DMA buffers break record,
 * and the MPU event handling seems suspect. VSA2 allows the native driver
 * to control the AC97 audio engine directly and requires a different driver.
 *
 * Thanks to National Semiconductor for providing the needed information
 * on the XpressAudio(tm) internals.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * TO DO:
 *      Investigate whether we can portably support Cognac (5520) in the
 *      same manner.
 */

#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>

#include "sound_config.h"

#include "sb.h"

/*
 *      Read a soundblaster compatible mixer register.
 *      In this case we are actually reading an SMI trap
 *      not real hardware.
 */

static u8 __devinit mixer_read(unsigned long io, u8 reg)
{
        outb(reg, io + 4);
        udelay(20);
        reg = inb(io + 5);
        udelay(20);
        return reg;
}

static int __devinit probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
        struct address_info *hw_config;
        unsigned long base;
        void __iomem *mem;
        unsigned long io;
        u16 map;
        u8 irq, dma8, dma16;
        int oldquiet;
        extern int sb_be_quiet;
                
        base = pci_resource_start(pdev, 0);
        if(base == 0UL)
                return 1;
        
        mem = ioremap(base, 128);
        if (!mem)
                return 1;
        map = readw(mem + 0x18);        /* Read the SMI enables */
        iounmap(mem);
        
        /* Map bits
                0:1     * 0x20 + 0x200 = sb base
                2       sb enable
                3       adlib enable
                5       MPU enable 0x330
                6       MPU enable 0x300
                
           The other bits may be used internally so must be masked */

        io = 0x220 + 0x20 * (map & 3);     
        
        if(map & (1<<2))
                printk(KERN_INFO "kahlua: XpressAudio at 0x%lx\n", io);
        else
                return 1;
                
        if(map & (1<<5))
                printk(KERN_INFO "kahlua: MPU at 0x300\n");
        else if(map & (1<<6))
                printk(KERN_INFO "kahlua: MPU at 0x330\n");
        
        irq = mixer_read(io, 0x80) & 0x0F;
        dma8 = mixer_read(io, 0x81);

        // printk("IRQ=%x MAP=%x DMA=%x\n", irq, map, dma8);
        
        if(dma8 & 0x20)
                dma16 = 5;
        else if(dma8 & 0x40)
                dma16 = 6;
        else if(dma8 & 0x80)
                dma16 = 7;
        else
        {
                printk(KERN_ERR "kahlua: No 16bit DMA enabled.\n");
                return 1;
        }
                
        if(dma8 & 0x01)
                dma8 = 0;
        else if(dma8 & 0x02)
                dma8 = 1;
        else if(dma8 & 0x08)
                dma8 = 3;
        else
        {
                printk(KERN_ERR "kahlua: No 8bit DMA enabled.\n");
                return 1;
        }
        
        if(irq & 1)
                irq = 9;
        else if(irq & 2)
                irq = 5;
        else if(irq & 4)
                irq = 7;
        else if(irq & 8)
                irq = 10;
        else
        {
                printk(KERN_ERR "kahlua: SB IRQ not set.\n");
                return 1;
        }
        
        printk(KERN_INFO "kahlua: XpressAudio on IRQ %d, DMA %d, %d\n",
                irq, dma8, dma16);
        
        hw_config = kzalloc(sizeof(struct address_info), GFP_KERNEL);
        if(hw_config == NULL)
        {
                printk(KERN_ERR "kahlua: out of memory.\n");
                return 1;
        }
        
        pci_set_drvdata(pdev, hw_config);
        
        hw_config->io_base = io;
        hw_config->irq = irq;
        hw_config->dma = dma8;
        hw_config->dma2 = dma16;
        hw_config->name = "Cyrix XpressAudio";
        hw_config->driver_use_1 = SB_NO_MIDI | SB_PCI_IRQ;

        if (!request_region(io, 16, "soundblaster"))
                goto err_out_free;
        
        if(sb_dsp_detect(hw_config, 0, 0, NULL)==0)
        {
                printk(KERN_ERR "kahlua: audio not responding.\n");
                release_region(io, 16);
                goto err_out_free;
        }

        oldquiet = sb_be_quiet; 
        sb_be_quiet = 1;
        if(sb_dsp_init(hw_config, THIS_MODULE))
        {
                sb_be_quiet = oldquiet;
                goto err_out_free;
        }
        sb_be_quiet = oldquiet;
        
        return 0;

err_out_free:
        pci_set_drvdata(pdev, NULL);
        kfree(hw_config);
        return 1;
}

static void __devexit remove_one(struct pci_dev *pdev)
{
        struct address_info *hw_config = pci_get_drvdata(pdev);
        sb_dsp_unload(hw_config, 0);
        pci_set_drvdata(pdev, NULL);
        kfree(hw_config);
}

MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("Kahlua VSA1 PCI Audio");
MODULE_LICENSE("GPL");

/*
 *      5530 only. The 5510/5520 decode is different.
 */

static struct pci_device_id id_tbl[] = {
        { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 },
        { }
};

MODULE_DEVICE_TABLE(pci, id_tbl);

static struct pci_driver kahlua_driver = {
        .name           = "kahlua",
        .id_table       = id_tbl,
        .probe          = probe_one,
        .remove         = __devexit_p(remove_one),
};


static int __init kahlua_init_module(void)
{
        printk(KERN_INFO "Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc\n");
        return pci_register_driver(&kahlua_driver);
}

static void __devexit kahlua_cleanup_module(void)
{
        pci_unregister_driver(&kahlua_driver);
}


module_init(kahlua_init_module);
module_exit(kahlua_cleanup_module);