LXR linux/sound/oss/pas2

   1/*
   2 * sound/oss/pas2_card.c
   3 *
   4 * Detection routine for the Pro Audio Spectrum cards.
   5 */
   6
   7#include <linux/init.h>
   8#include <linux/interrupt.h>
   9#include <linux/module.h>
  10#include <linux/spinlock.h>
  11#include "sound_config.h"
  12
  13#include "pas2.h"
  14#include "sb.h"
  15
  16static unsigned char dma_bits[] = {
  17        4, 1, 2, 3, 0, 5, 6, 7
  18};
  19
  20static unsigned char irq_bits[] = {
  21        0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11
  22};
  23
  24static unsigned char sb_irq_bits[] = {
  25        0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20, 
  26        0x00, 0x08, 0x28, 0x30, 0x38, 0, 0
  27};
  28
  29static unsigned char sb_dma_bits[] = {
  30        0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0
  31};
  32
  33/*
  34 * The Address Translation code is used to convert I/O register addresses to
  35 * be relative to the given base -register
  36 */
  37
  38int             pas_translate_code = 0;
  39static int      pas_intr_mask;
  40static int      pas_irq;
  41static int      pas_sb_base;
  42DEFINE_SPINLOCK(pas_lock);
  43#ifndef CONFIG_PAS_JOYSTICK
  44static int      joystick;
  45#else
  46static int      joystick = 1;
  47#endif
  48#ifdef SYMPHONY_PAS
  49static int      symphony = 1;
  50#else
  51static int      symphony;
  52#endif
  53#ifdef BROKEN_BUS_CLOCK
  54static int      broken_bus_clock = 1;
  55#else
  56static int      broken_bus_clock;
  57#endif
  58
  59static struct address_info cfg;
  60static struct address_info cfg2;
  61
  62char            pas_model = 0;
  63static char    *pas_model_names[] = {
  64        "", 
  65        "Pro AudioSpectrum+", 
  66        "CDPC", 
  67        "Pro AudioSpectrum 16", 
  68        "Pro AudioSpectrum 16D"
  69};
  70
  71/*
  72 * pas_read() and pas_write() are equivalents of inb and outb 
  73 * These routines perform the I/O address translation required
  74 * to support other than the default base address
  75 */
  76
  77extern void     mix_write(unsigned char data, int ioaddr);
  78
  79unsigned char pas_read(int ioaddr)
  80{
  81        return inb(ioaddr + pas_translate_code);
  82}
  83
  84void pas_write(unsigned char data, int ioaddr)
  85{
  86        outb((data), ioaddr + pas_translate_code);
  87}
  88
  89/******************* Begin of the Interrupt Handler ********************/
  90
  91static irqreturn_t pasintr(int irq, void *dev_id)
  92{
  93        int             status;
  94
  95        status = pas_read(0x0B89);
  96        pas_write(status, 0x0B89);      /* Clear interrupt */
  97
  98        if (status & 0x08)
  99        {
 100                  pas_pcm_interrupt(status, 1);
 101                  status &= ~0x08;
 102        }
 103        if (status & 0x10)
 104        {
 105                  pas_midi_interrupt();
 106                  status &= ~0x10;
 107        }
 108        return IRQ_HANDLED;
 109}
 110
 111int pas_set_intr(int mask)
 112{
 113        if (!mask)
 114                return 0;
 115
 116        pas_intr_mask |= mask;
 117
 118        pas_write(pas_intr_mask, 0x0B8B);
 119        return 0;
 120}
 121
 122int pas_remove_intr(int mask)
 123{
 124        if (!mask)
 125                return 0;
 126
 127        pas_intr_mask &= ~mask;
 128        pas_write(pas_intr_mask, 0x0B8B);
 129
 130        return 0;
 131}
 132
 133/******************* End of the Interrupt handler **********************/
 134
 135/******************* Begin of the Initialization Code ******************/
 136
 137static int __init config_pas_hw(struct address_info *hw_config)
 138{
 139        char            ok = 1;
 140        unsigned        int_ptrs;       /* scsi/sound interrupt pointers */
 141
 142        pas_irq = hw_config->irq;
 143
 144        pas_write(0x00, 0x0B8B);
 145        pas_write(0x36, 0x138B);
 146        pas_write(0x36, 0x1388);
 147        pas_write(0, 0x1388);
 148        pas_write(0x74, 0x138B);
 149        pas_write(0x74, 0x1389);
 150        pas_write(0, 0x1389);
 151
 152        pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A);
 153        pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A);
 154        pas_write(0x01 | 0x02 | 0x04 | 0x10     /*
 155                                                 * |
 156                                                 * 0x80
 157                                                 */ , 0xB88);
 158
 159        pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388);
 160
 161        if (pas_irq < 0 || pas_irq > 15)
 162        {
 163                printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
 164                hw_config->irq=-1;
 165                ok = 0;
 166        }
 167        else
 168        {
 169                int_ptrs = pas_read(0xF38A);
 170                int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq];
 171                pas_write(int_ptrs, 0xF38A);
 172                if (!irq_bits[pas_irq])
 173                {
 174                        printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
 175                        hw_config->irq=-1;
 176                        ok = 0;
 177                }
 178                else
 179                {
 180                        if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) {
 181                                printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq);
 182                                hw_config->irq=-1;
 183                                ok = 0;
 184                        }
 185                }
 186        }
 187
 188        if (hw_config->dma < 0 || hw_config->dma > 7)
 189        {
 190                printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
 191                hw_config->dma=-1;
 192                ok = 0;
 193        }
 194        else
 195        {
 196                pas_write(dma_bits[hw_config->dma], 0xF389);
 197                if (!dma_bits[hw_config->dma])
 198                {
 199                        printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
 200                        hw_config->dma=-1;
 201                        ok = 0;
 202                }
 203                else
 204                {
 205                        if (sound_alloc_dma(hw_config->dma, "PAS16"))
 206                        {
 207                                printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n");
 208                                hw_config->dma=-1;
 209                                ok = 0;
 210                        }
 211                }
 212        }
 213
 214        /*
 215         * This fixes the timing problems of the PAS due to the Symphony chipset
 216         * as per Media Vision.  Only define this if your PAS doesn't work correctly.
 217         */
 218
 219        if(symphony)
 220        {
 221                outb((0x05), 0xa8);
 222                outb((0x60), 0xa9);
 223        }
 224
 225        if(broken_bus_clock)
 226                pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388);
 227        else
 228                /*
 229                 * pas_write(0x01, 0x8388);
 230                 */
 231                pas_write(0x01 | 0x10 | 0x20, 0x8388);
 232
 233        pas_write(0x18, 0x838A);        /* ??? */
 234        pas_write(0x20 | 0x01, 0x0B8A);         /* Mute off, filter = 17.897 kHz */
 235        pas_write(8, 0xBF8A);
 236
 237        mix_write(0x80 | 5, 0x078B);
 238        mix_write(5, 0x078B);
 239
 240        {
 241                struct address_info *sb_config;
 242
 243                sb_config = &cfg2;
 244                if (sb_config->io_base)
 245                {
 246                        unsigned char   irq_dma;
 247
 248                        /*
 249                         * Turn on Sound Blaster compatibility
 250                         * bit 1 = SB emulation
 251                         * bit 0 = MPU401 emulation (CDPC only :-( )
 252                         */
 253                        
 254                        pas_write(0x02, 0xF788);
 255
 256                        /*
 257                         * "Emulation address"
 258                         */
 259                        
 260                        pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789);
 261                        pas_sb_base = sb_config->io_base;
 262
 263                        if (!sb_dma_bits[sb_config->dma])
 264                                printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma);
 265
 266                        if (!sb_irq_bits[sb_config->irq])
 267                                printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq);
 268
 269                        irq_dma = sb_dma_bits[sb_config->dma] |
 270                                sb_irq_bits[sb_config->irq];
 271
 272                        pas_write(irq_dma, 0xFB8A);
 273                }
 274                else
 275                        pas_write(0x00, 0xF788);
 276        }
 277
 278        if (!ok)
 279                printk(KERN_WARNING "PAS16: Driver not enabled\n");
 280
 281        return ok;
 282}
 283
 284static int __init detect_pas_hw(struct address_info *hw_config)
 285{
 286        unsigned char   board_id, foo;
 287
 288        /*
 289         * WARNING: Setting an option like W:1 or so that disables warm boot reset
 290         * of the card will screw up this detect code something fierce. Adding code
 291         * to handle this means possibly interfering with other cards on the bus if
 292         * you have something on base port 0x388. SO be forewarned.
 293         */
 294
 295        outb((0xBC), 0x9A01);   /* Activate first board */
 296        outb((hw_config->io_base >> 2), 0x9A01);        /* Set base address */
 297        pas_translate_code = hw_config->io_base - 0x388;
 298        pas_write(1, 0xBF88);   /* Select one wait states */
 299
 300        board_id = pas_read(0x0B8B);
 301
 302        if (board_id == 0xff)
 303                return 0;
 304
 305        /*
 306         * We probably have a PAS-series board, now check for a PAS16-series board
 307         * by trying to change the board revision bits. PAS16-series hardware won't
 308         * let you do this - the bits are read-only.
 309         */
 310
 311        foo = board_id ^ 0xe0;
 312
 313        pas_write(foo, 0x0B8B);
 314        foo = pas_read(0x0B8B);
 315        pas_write(board_id, 0x0B8B);
 316
 317        if (board_id != foo)
 318                return 0;
 319
 320        pas_model = pas_read(0xFF88);
 321
 322        return pas_model;
 323}
 324
 325static void __init attach_pas_card(struct address_info *hw_config)
 326{
 327        pas_irq = hw_config->irq;
 328
 329        if (detect_pas_hw(hw_config))
 330        {
 331
 332                if ((pas_model = pas_read(0xFF88)))
 333                {
 334                        char            temp[100];
 335
 336                        sprintf(temp,
 337                            "%s rev %d", pas_model_names[(int) pas_model],
 338                                    pas_read(0x2789));
 339                        conf_printf(temp, hw_config);
 340                }
 341                if (config_pas_hw(hw_config))
 342                {
 343                        pas_pcm_init(hw_config);
 344                        pas_midi_init();
 345                        pas_init_mixer();
 346                }
 347        }
 348}
 349
 350static inline int __init probe_pas(struct address_info *hw_config)
 351{
 352        return detect_pas_hw(hw_config);
 353}
 354
 355static void __exit unload_pas(struct address_info *hw_config)
 356{
 357        extern int pas_audiodev;
 358        extern int pas2_mididev;
 359
 360        if (hw_config->dma>0)
 361                sound_free_dma(hw_config->dma);
 362        if (hw_config->irq>0)
 363                free_irq(hw_config->irq, hw_config);
 364
 365        if(pas_audiodev!=-1)
 366                sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev);
 367        if(pas2_mididev!=-1)
 368                sound_unload_mididev(pas2_mididev);
 369        if(pas_audiodev!=-1)
 370                sound_unload_audiodev(pas_audiodev);
 371}
 372
 373static int __initdata io        = -1;
 374static int __initdata irq       = -1;
 375static int __initdata dma       = -1;
 376static int __initdata dma16     = -1;   /* Set this for modules that need it */
 377
 378static int __initdata sb_io     = 0;
 379static int __initdata sb_irq    = -1;
 380static int __initdata sb_dma    = -1;
 381static int __initdata sb_dma16  = -1;
 382
 383module_param(io, int, 0);
 384module_param(irq, int, 0);
 385module_param(dma, int, 0);
 386module_param(dma16, int, 0);
 387
 388module_param(sb_io, int, 0);
 389module_param(sb_irq, int, 0);
 390module_param(sb_dma, int, 0);
 391module_param(sb_dma16, int, 0);
 392
 393module_param(joystick, bool, 0);
 394module_param(symphony, bool, 0);
 395module_param(broken_bus_clock, bool, 0);
 396
 397MODULE_LICENSE("GPL");
 398
 399static int __init init_pas2(void)
 400{
 401        printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n");
 402
 403        cfg.io_base = io;
 404        cfg.irq = irq;
 405        cfg.dma = dma;
 406        cfg.dma2 = dma16;
 407
 408        cfg2.io_base = sb_io;
 409        cfg2.irq = sb_irq;
 410        cfg2.dma = sb_dma;
 411        cfg2.dma2 = sb_dma16;
 412
 413        if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
 414                printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
 415                return -EINVAL;
 416        }
 417
 418        if (!probe_pas(&cfg))
 419                return -ENODEV;
 420        attach_pas_card(&cfg);
 421
 422        return 0;
 423}
 424
 425static void __exit cleanup_pas2(void)
 426{
 427        unload_pas(&cfg);
 428}
 429
 430module_init(init_pas2);
 431module_exit(cleanup_pas2);
 432
 433#ifndef MODULE
 434static int __init setup_pas2(char *str)
 435{
 436        /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */
 437        int ints[9];
 438        
 439        str = get_options(str, ARRAY_SIZE(ints), ints);
 440
 441        io      = ints[1];
 442        irq     = ints[2];
 443        dma     = ints[3];
 444        dma16   = ints[4];
 445
 446        sb_io   = ints[5];
 447        sb_irq  = ints[6];
 448        sb_dma  = ints[7];
 449        sb_dma16 = ints[8];
 450
 451        return 1;
 452}
 453
 454__setup("pas2=", setup_pas2);
 455#endif
 456