linux/arch/arm/common/pl330.c
<<
>>
Prefs
   1/* linux/arch/arm/common/pl330.c
   2 *
   3 * Copyright (C) 2010 Samsung Electronics Co Ltd.
   4 *      Jaswinder Singh <jassi.brar@samsung.com>
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 * You should have received a copy of the GNU General Public License
  17 * along with this program; if not, write to the Free Software
  18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19 */
  20
  21#include <linux/kernel.h>
  22#include <linux/init.h>
  23#include <linux/slab.h>
  24#include <linux/module.h>
  25#include <linux/string.h>
  26#include <linux/io.h>
  27#include <linux/delay.h>
  28#include <linux/interrupt.h>
  29#include <linux/dma-mapping.h>
  30
  31#include <asm/hardware/pl330.h>
  32
  33/* Register and Bit field Definitions */
  34#define DS              0x0
  35#define DS_ST_STOP      0x0
  36#define DS_ST_EXEC      0x1
  37#define DS_ST_CMISS     0x2
  38#define DS_ST_UPDTPC    0x3
  39#define DS_ST_WFE       0x4
  40#define DS_ST_ATBRR     0x5
  41#define DS_ST_QBUSY     0x6
  42#define DS_ST_WFP       0x7
  43#define DS_ST_KILL      0x8
  44#define DS_ST_CMPLT     0x9
  45#define DS_ST_FLTCMP    0xe
  46#define DS_ST_FAULT     0xf
  47
  48#define DPC             0x4
  49#define INTEN           0x20
  50#define ES              0x24
  51#define INTSTATUS       0x28
  52#define INTCLR          0x2c
  53#define FSM             0x30
  54#define FSC             0x34
  55#define FTM             0x38
  56
  57#define _FTC            0x40
  58#define FTC(n)          (_FTC + (n)*0x4)
  59
  60#define _CS             0x100
  61#define CS(n)           (_CS + (n)*0x8)
  62#define CS_CNS          (1 << 21)
  63
  64#define _CPC            0x104
  65#define CPC(n)          (_CPC + (n)*0x8)
  66
  67#define _SA             0x400
  68#define SA(n)           (_SA + (n)*0x20)
  69
  70#define _DA             0x404
  71#define DA(n)           (_DA + (n)*0x20)
  72
  73#define _CC             0x408
  74#define CC(n)           (_CC + (n)*0x20)
  75
  76#define CC_SRCINC       (1 << 0)
  77#define CC_DSTINC       (1 << 14)
  78#define CC_SRCPRI       (1 << 8)
  79#define CC_DSTPRI       (1 << 22)
  80#define CC_SRCNS        (1 << 9)
  81#define CC_DSTNS        (1 << 23)
  82#define CC_SRCIA        (1 << 10)
  83#define CC_DSTIA        (1 << 24)
  84#define CC_SRCBRSTLEN_SHFT      4
  85#define CC_DSTBRSTLEN_SHFT      18
  86#define CC_SRCBRSTSIZE_SHFT     1
  87#define CC_DSTBRSTSIZE_SHFT     15
  88#define CC_SRCCCTRL_SHFT        11
  89#define CC_SRCCCTRL_MASK        0x7
  90#define CC_DSTCCTRL_SHFT        25
  91#define CC_DRCCCTRL_MASK        0x7
  92#define CC_SWAP_SHFT    28
  93
  94#define _LC0            0x40c
  95#define LC0(n)          (_LC0 + (n)*0x20)
  96
  97#define _LC1            0x410
  98#define LC1(n)          (_LC1 + (n)*0x20)
  99
 100#define DBGSTATUS       0xd00
 101#define DBG_BUSY        (1 << 0)
 102
 103#define DBGCMD          0xd04
 104#define DBGINST0        0xd08
 105#define DBGINST1        0xd0c
 106
 107#define CR0             0xe00
 108#define CR1             0xe04
 109#define CR2             0xe08
 110#define CR3             0xe0c
 111#define CR4             0xe10
 112#define CRD             0xe14
 113
 114#define PERIPH_ID       0xfe0
 115#define PCELL_ID        0xff0
 116
 117#define CR0_PERIPH_REQ_SET      (1 << 0)
 118#define CR0_BOOT_EN_SET         (1 << 1)
 119#define CR0_BOOT_MAN_NS         (1 << 2)
 120#define CR0_NUM_CHANS_SHIFT     4
 121#define CR0_NUM_CHANS_MASK      0x7
 122#define CR0_NUM_PERIPH_SHIFT    12
 123#define CR0_NUM_PERIPH_MASK     0x1f
 124#define CR0_NUM_EVENTS_SHIFT    17
 125#define CR0_NUM_EVENTS_MASK     0x1f
 126
 127#define CR1_ICACHE_LEN_SHIFT    0
 128#define CR1_ICACHE_LEN_MASK     0x7
 129#define CR1_NUM_ICACHELINES_SHIFT       4
 130#define CR1_NUM_ICACHELINES_MASK        0xf
 131
 132#define CRD_DATA_WIDTH_SHIFT    0
 133#define CRD_DATA_WIDTH_MASK     0x7
 134#define CRD_WR_CAP_SHIFT        4
 135#define CRD_WR_CAP_MASK         0x7
 136#define CRD_WR_Q_DEP_SHIFT      8
 137#define CRD_WR_Q_DEP_MASK       0xf
 138#define CRD_RD_CAP_SHIFT        12
 139#define CRD_RD_CAP_MASK         0x7
 140#define CRD_RD_Q_DEP_SHIFT      16
 141#define CRD_RD_Q_DEP_MASK       0xf
 142#define CRD_DATA_BUFF_SHIFT     20
 143#define CRD_DATA_BUFF_MASK      0x3ff
 144
 145#define PART            0x330
 146#define DESIGNER        0x41
 147#define REVISION        0x0
 148#define INTEG_CFG       0x0
 149#define PERIPH_ID_VAL   ((PART << 0) | (DESIGNER << 12))
 150
 151#define PCELL_ID_VAL    0xb105f00d
 152
 153#define PL330_STATE_STOPPED             (1 << 0)
 154#define PL330_STATE_EXECUTING           (1 << 1)
 155#define PL330_STATE_WFE                 (1 << 2)
 156#define PL330_STATE_FAULTING            (1 << 3)
 157#define PL330_STATE_COMPLETING          (1 << 4)
 158#define PL330_STATE_WFP                 (1 << 5)
 159#define PL330_STATE_KILLING             (1 << 6)
 160#define PL330_STATE_FAULT_COMPLETING    (1 << 7)
 161#define PL330_STATE_CACHEMISS           (1 << 8)
 162#define PL330_STATE_UPDTPC              (1 << 9)
 163#define PL330_STATE_ATBARRIER           (1 << 10)
 164#define PL330_STATE_QUEUEBUSY           (1 << 11)
 165#define PL330_STATE_INVALID             (1 << 15)
 166
 167#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
 168                                | PL330_STATE_WFE | PL330_STATE_FAULTING)
 169
 170#define CMD_DMAADDH     0x54
 171#define CMD_DMAEND      0x00
 172#define CMD_DMAFLUSHP   0x35
 173#define CMD_DMAGO       0xa0
 174#define CMD_DMALD       0x04
 175#define CMD_DMALDP      0x25
 176#define CMD_DMALP       0x20
 177#define CMD_DMALPEND    0x28
 178#define CMD_DMAKILL     0x01
 179#define CMD_DMAMOV      0xbc
 180#define CMD_DMANOP      0x18
 181#define CMD_DMARMB      0x12
 182#define CMD_DMASEV      0x34
 183#define CMD_DMAST       0x08
 184#define CMD_DMASTP      0x29
 185#define CMD_DMASTZ      0x0c
 186#define CMD_DMAWFE      0x36
 187#define CMD_DMAWFP      0x30
 188#define CMD_DMAWMB      0x13
 189
 190#define SZ_DMAADDH      3
 191#define SZ_DMAEND       1
 192#define SZ_DMAFLUSHP    2
 193#define SZ_DMALD        1
 194#define SZ_DMALDP       2
 195#define SZ_DMALP        2
 196#define SZ_DMALPEND     2
 197#define SZ_DMAKILL      1
 198#define SZ_DMAMOV       6
 199#define SZ_DMANOP       1
 200#define SZ_DMARMB       1
 201#define SZ_DMASEV       2
 202#define SZ_DMAST        1
 203#define SZ_DMASTP       2
 204#define SZ_DMASTZ       1
 205#define SZ_DMAWFE       2
 206#define SZ_DMAWFP       2
 207#define SZ_DMAWMB       1
 208#define SZ_DMAGO        6
 209
 210#define BRST_LEN(ccr)   ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
 211#define BRST_SIZE(ccr)  (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
 212
 213#define BYTE_TO_BURST(b, ccr)  ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
 214#define BURST_TO_BYTE(c, ccr)  ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
 215
 216/*
 217 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
 218 * at 1byte/burst for P<->M and M<->M respectively.
 219 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
 220 * should be enough for P<->M and M<->M respectively.
 221 */
 222#define MCODE_BUFF_PER_REQ      256
 223
 224/*
 225 * Mark a _pl330_req as free.
 226 * We do it by writing DMAEND as the first instruction
 227 * because no valid request is going to have DMAEND as
 228 * its first instruction to execute.
 229 */
 230#define MARK_FREE(req)  do { \
 231                                _emit_END(0, (req)->mc_cpu); \
 232                                (req)->mc_len = 0; \
 233                        } while (0)
 234
 235/* If the _pl330_req is available to the client */
 236#define IS_FREE(req)    (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
 237
 238/* Use this _only_ to wait on transient states */
 239#define UNTIL(t, s)     while (!(_state(t) & (s))) cpu_relax();
 240
 241#ifdef PL330_DEBUG_MCGEN
 242static unsigned cmd_line;
 243#define PL330_DBGCMD_DUMP(off, x...)    do { \
 244                                                printk("%x:", cmd_line); \
 245                                                printk(x); \
 246                                                cmd_line += off; \
 247                                        } while (0)
 248#define PL330_DBGMC_START(addr)         (cmd_line = addr)
 249#else
 250#define PL330_DBGCMD_DUMP(off, x...)    do {} while (0)
 251#define PL330_DBGMC_START(addr)         do {} while (0)
 252#endif
 253
 254struct _xfer_spec {
 255        u32 ccr;
 256        struct pl330_req *r;
 257        struct pl330_xfer *x;
 258};
 259
 260enum dmamov_dst {
 261        SAR = 0,
 262        CCR,
 263        DAR,
 264};
 265
 266enum pl330_dst {
 267        SRC = 0,
 268        DST,
 269};
 270
 271enum pl330_cond {
 272        SINGLE,
 273        BURST,
 274        ALWAYS,
 275};
 276
 277struct _pl330_req {
 278        u32 mc_bus;
 279        void *mc_cpu;
 280        /* Number of bytes taken to setup MC for the req */
 281        u32 mc_len;
 282        struct pl330_req *r;
 283        /* Hook to attach to DMAC's list of reqs with due callback */
 284        struct list_head rqd;
 285};
 286
 287/* ToBeDone for tasklet */
 288struct _pl330_tbd {
 289        bool reset_dmac;
 290        bool reset_mngr;
 291        u8 reset_chan;
 292};
 293
 294/* A DMAC Thread */
 295struct pl330_thread {
 296        u8 id;
 297        int ev;
 298        /* If the channel is not yet acquired by any client */
 299        bool free;
 300        /* Parent DMAC */
 301        struct pl330_dmac *dmac;
 302        /* Only two at a time */
 303        struct _pl330_req req[2];
 304        /* Index of the last submitted request */
 305        unsigned lstenq;
 306};
 307
 308enum pl330_dmac_state {
 309        UNINIT,
 310        INIT,
 311        DYING,
 312};
 313
 314/* A DMAC */
 315struct pl330_dmac {
 316        spinlock_t              lock;
 317        /* Holds list of reqs with due callbacks */
 318        struct list_head        req_done;
 319        /* Pointer to platform specific stuff */
 320        struct pl330_info       *pinfo;
 321        /* Maximum possible events/irqs */
 322        int                     events[32];
 323        /* BUS address of MicroCode buffer */
 324        u32                     mcode_bus;
 325        /* CPU address of MicroCode buffer */
 326        void                    *mcode_cpu;
 327        /* List of all Channel threads */
 328        struct pl330_thread     *channels;
 329        /* Pointer to the MANAGER thread */
 330        struct pl330_thread     *manager;
 331        /* To handle bad news in interrupt */
 332        struct tasklet_struct   tasks;
 333        struct _pl330_tbd       dmac_tbd;
 334        /* State of DMAC operation */
 335        enum pl330_dmac_state   state;
 336};
 337
 338static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
 339{
 340        if (r && r->xfer_cb)
 341                r->xfer_cb(r->token, err);
 342}
 343
 344static inline bool _queue_empty(struct pl330_thread *thrd)
 345{
 346        return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
 347                ? true : false;
 348}
 349
 350static inline bool _queue_full(struct pl330_thread *thrd)
 351{
 352        return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
 353                ? false : true;
 354}
 355
 356static inline bool is_manager(struct pl330_thread *thrd)
 357{
 358        struct pl330_dmac *pl330 = thrd->dmac;
 359
 360        /* MANAGER is indexed at the end */
 361        if (thrd->id == pl330->pinfo->pcfg.num_chan)
 362                return true;
 363        else
 364                return false;
 365}
 366
 367/* If manager of the thread is in Non-Secure mode */
 368static inline bool _manager_ns(struct pl330_thread *thrd)
 369{
 370        struct pl330_dmac *pl330 = thrd->dmac;
 371
 372        return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
 373}
 374
 375static inline u32 get_id(struct pl330_info *pi, u32 off)
 376{
 377        void __iomem *regs = pi->base;
 378        u32 id = 0;
 379
 380        id |= (readb(regs + off + 0x0) << 0);
 381        id |= (readb(regs + off + 0x4) << 8);
 382        id |= (readb(regs + off + 0x8) << 16);
 383        id |= (readb(regs + off + 0xc) << 24);
 384
 385        return id;
 386}
 387
 388static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
 389                enum pl330_dst da, u16 val)
 390{
 391        if (dry_run)
 392                return SZ_DMAADDH;
 393
 394        buf[0] = CMD_DMAADDH;
 395        buf[0] |= (da << 1);
 396        *((u16 *)&buf[1]) = val;
 397
 398        PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
 399                da == 1 ? "DA" : "SA", val);
 400
 401        return SZ_DMAADDH;
 402}
 403
 404static inline u32 _emit_END(unsigned dry_run, u8 buf[])
 405{
 406        if (dry_run)
 407                return SZ_DMAEND;
 408
 409        buf[0] = CMD_DMAEND;
 410
 411        PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
 412
 413        return SZ_DMAEND;
 414}
 415
 416static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
 417{
 418        if (dry_run)
 419                return SZ_DMAFLUSHP;
 420
 421        buf[0] = CMD_DMAFLUSHP;
 422
 423        peri &= 0x1f;
 424        peri <<= 3;
 425        buf[1] = peri;
 426
 427        PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
 428
 429        return SZ_DMAFLUSHP;
 430}
 431
 432static inline u32 _emit_LD(unsigned dry_run, u8 buf[],  enum pl330_cond cond)
 433{
 434        if (dry_run)
 435                return SZ_DMALD;
 436
 437        buf[0] = CMD_DMALD;
 438
 439        if (cond == SINGLE)
 440                buf[0] |= (0 << 1) | (1 << 0);
 441        else if (cond == BURST)
 442                buf[0] |= (1 << 1) | (1 << 0);
 443
 444        PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
 445                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
 446
 447        return SZ_DMALD;
 448}
 449
 450static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
 451                enum pl330_cond cond, u8 peri)
 452{
 453        if (dry_run)
 454                return SZ_DMALDP;
 455
 456        buf[0] = CMD_DMALDP;
 457
 458        if (cond == BURST)
 459                buf[0] |= (1 << 1);
 460
 461        peri &= 0x1f;
 462        peri <<= 3;
 463        buf[1] = peri;
 464
 465        PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
 466                cond == SINGLE ? 'S' : 'B', peri >> 3);
 467
 468        return SZ_DMALDP;
 469}
 470
 471static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
 472                unsigned loop, u8 cnt)
 473{
 474        if (dry_run)
 475                return SZ_DMALP;
 476
 477        buf[0] = CMD_DMALP;
 478
 479        if (loop)
 480                buf[0] |= (1 << 1);
 481
 482        cnt--; /* DMAC increments by 1 internally */
 483        buf[1] = cnt;
 484
 485        PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
 486
 487        return SZ_DMALP;
 488}
 489
 490struct _arg_LPEND {
 491        enum pl330_cond cond;
 492        bool forever;
 493        unsigned loop;
 494        u8 bjump;
 495};
 496
 497static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
 498                const struct _arg_LPEND *arg)
 499{
 500        enum pl330_cond cond = arg->cond;
 501        bool forever = arg->forever;
 502        unsigned loop = arg->loop;
 503        u8 bjump = arg->bjump;
 504
 505        if (dry_run)
 506                return SZ_DMALPEND;
 507
 508        buf[0] = CMD_DMALPEND;
 509
 510        if (loop)
 511                buf[0] |= (1 << 2);
 512
 513        if (!forever)
 514                buf[0] |= (1 << 4);
 515
 516        if (cond == SINGLE)
 517                buf[0] |= (0 << 1) | (1 << 0);
 518        else if (cond == BURST)
 519                buf[0] |= (1 << 1) | (1 << 0);
 520
 521        buf[1] = bjump;
 522
 523        PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
 524                        forever ? "FE" : "END",
 525                        cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
 526                        loop ? '1' : '0',
 527                        bjump);
 528
 529        return SZ_DMALPEND;
 530}
 531
 532static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
 533{
 534        if (dry_run)
 535                return SZ_DMAKILL;
 536
 537        buf[0] = CMD_DMAKILL;
 538
 539        return SZ_DMAKILL;
 540}
 541
 542static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
 543                enum dmamov_dst dst, u32 val)
 544{
 545        if (dry_run)
 546                return SZ_DMAMOV;
 547
 548        buf[0] = CMD_DMAMOV;
 549        buf[1] = dst;
 550        *((u32 *)&buf[2]) = val;
 551
 552        PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
 553                dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
 554
 555        return SZ_DMAMOV;
 556}
 557
 558static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
 559{
 560        if (dry_run)
 561                return SZ_DMANOP;
 562
 563        buf[0] = CMD_DMANOP;
 564
 565        PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
 566
 567        return SZ_DMANOP;
 568}
 569
 570static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
 571{
 572        if (dry_run)
 573                return SZ_DMARMB;
 574
 575        buf[0] = CMD_DMARMB;
 576
 577        PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
 578
 579        return SZ_DMARMB;
 580}
 581
 582static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
 583{
 584        if (dry_run)
 585                return SZ_DMASEV;
 586
 587        buf[0] = CMD_DMASEV;
 588
 589        ev &= 0x1f;
 590        ev <<= 3;
 591        buf[1] = ev;
 592
 593        PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
 594
 595        return SZ_DMASEV;
 596}
 597
 598static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
 599{
 600        if (dry_run)
 601                return SZ_DMAST;
 602
 603        buf[0] = CMD_DMAST;
 604
 605        if (cond == SINGLE)
 606                buf[0] |= (0 << 1) | (1 << 0);
 607        else if (cond == BURST)
 608                buf[0] |= (1 << 1) | (1 << 0);
 609
 610        PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
 611                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
 612
 613        return SZ_DMAST;
 614}
 615
 616static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
 617                enum pl330_cond cond, u8 peri)
 618{
 619        if (dry_run)
 620                return SZ_DMASTP;
 621
 622        buf[0] = CMD_DMASTP;
 623
 624        if (cond == BURST)
 625                buf[0] |= (1 << 1);
 626
 627        peri &= 0x1f;
 628        peri <<= 3;
 629        buf[1] = peri;
 630
 631        PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
 632                cond == SINGLE ? 'S' : 'B', peri >> 3);
 633
 634        return SZ_DMASTP;
 635}
 636
 637static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
 638{
 639        if (dry_run)
 640                return SZ_DMASTZ;
 641
 642        buf[0] = CMD_DMASTZ;
 643
 644        PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
 645
 646        return SZ_DMASTZ;
 647}
 648
 649static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
 650                unsigned invalidate)
 651{
 652        if (dry_run)
 653                return SZ_DMAWFE;
 654
 655        buf[0] = CMD_DMAWFE;
 656
 657        ev &= 0x1f;
 658        ev <<= 3;
 659        buf[1] = ev;
 660
 661        if (invalidate)
 662                buf[1] |= (1 << 1);
 663
 664        PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
 665                ev >> 3, invalidate ? ", I" : "");
 666
 667        return SZ_DMAWFE;
 668}
 669
 670static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
 671                enum pl330_cond cond, u8 peri)
 672{
 673        if (dry_run)
 674                return SZ_DMAWFP;
 675
 676        buf[0] = CMD_DMAWFP;
 677
 678        if (cond == SINGLE)
 679                buf[0] |= (0 << 1) | (0 << 0);
 680        else if (cond == BURST)
 681                buf[0] |= (1 << 1) | (0 << 0);
 682        else
 683                buf[0] |= (0 << 1) | (1 << 0);
 684
 685        peri &= 0x1f;
 686        peri <<= 3;
 687        buf[1] = peri;
 688
 689        PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
 690                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
 691
 692        return SZ_DMAWFP;
 693}
 694
 695static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
 696{
 697        if (dry_run)
 698                return SZ_DMAWMB;
 699
 700        buf[0] = CMD_DMAWMB;
 701
 702        PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
 703
 704        return SZ_DMAWMB;
 705}
 706
 707struct _arg_GO {
 708        u8 chan;
 709        u32 addr;
 710        unsigned ns;
 711};
 712
 713static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
 714                const struct _arg_GO *arg)
 715{
 716        u8 chan = arg->chan;
 717        u32 addr = arg->addr;
 718        unsigned ns = arg->ns;
 719
 720        if (dry_run)
 721                return SZ_DMAGO;
 722
 723        buf[0] = CMD_DMAGO;
 724        buf[0] |= (ns << 1);
 725
 726        buf[1] = chan & 0x7;
 727
 728        *((u32 *)&buf[2]) = addr;
 729
 730        return SZ_DMAGO;
 731}
 732
 733#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
 734
 735/* Returns Time-Out */
 736static bool _until_dmac_idle(struct pl330_thread *thrd)
 737{
 738        void __iomem *regs = thrd->dmac->pinfo->base;
 739        unsigned long loops = msecs_to_loops(5);
 740
 741        do {
 742                /* Until Manager is Idle */
 743                if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
 744                        break;
 745
 746                cpu_relax();
 747        } while (--loops);
 748
 749        if (!loops)
 750                return true;
 751
 752        return false;
 753}
 754
 755static inline void _execute_DBGINSN(struct pl330_thread *thrd,
 756                u8 insn[], bool as_manager)
 757{
 758        void __iomem *regs = thrd->dmac->pinfo->base;
 759        u32 val;
 760
 761        val = (insn[0] << 16) | (insn[1] << 24);
 762        if (!as_manager) {
 763                val |= (1 << 0);
 764                val |= (thrd->id << 8); /* Channel Number */
 765        }
 766        writel(val, regs + DBGINST0);
 767
 768        val = *((u32 *)&insn[2]);
 769        writel(val, regs + DBGINST1);
 770
 771        /* If timed out due to halted state-machine */
 772        if (_until_dmac_idle(thrd)) {
 773                dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
 774                return;
 775        }
 776
 777        /* Get going */
 778        writel(0, regs + DBGCMD);
 779}
 780
 781static inline u32 _state(struct pl330_thread *thrd)
 782{
 783        void __iomem *regs = thrd->dmac->pinfo->base;
 784        u32 val;
 785
 786        if (is_manager(thrd))
 787                val = readl(regs + DS) & 0xf;
 788        else
 789                val = readl(regs + CS(thrd->id)) & 0xf;
 790
 791        switch (val) {
 792        case DS_ST_STOP:
 793                return PL330_STATE_STOPPED;
 794        case DS_ST_EXEC:
 795                return PL330_STATE_EXECUTING;
 796        case DS_ST_CMISS:
 797                return PL330_STATE_CACHEMISS;
 798        case DS_ST_UPDTPC:
 799                return PL330_STATE_UPDTPC;
 800        case DS_ST_WFE:
 801                return PL330_STATE_WFE;
 802        case DS_ST_FAULT:
 803                return PL330_STATE_FAULTING;
 804        case DS_ST_ATBRR:
 805                if (is_manager(thrd))
 806                        return PL330_STATE_INVALID;
 807                else
 808                        return PL330_STATE_ATBARRIER;
 809        case DS_ST_QBUSY:
 810                if (is_manager(thrd))
 811                        return PL330_STATE_INVALID;
 812                else
 813                        return PL330_STATE_QUEUEBUSY;
 814        case DS_ST_WFP:
 815                if (is_manager(thrd))
 816                        return PL330_STATE_INVALID;
 817                else
 818                        return PL330_STATE_WFP;
 819        case DS_ST_KILL:
 820                if (is_manager(thrd))
 821                        return PL330_STATE_INVALID;
 822                else
 823                        return PL330_STATE_KILLING;
 824        case DS_ST_CMPLT:
 825                if (is_manager(thrd))
 826                        return PL330_STATE_INVALID;
 827                else
 828                        return PL330_STATE_COMPLETING;
 829        case DS_ST_FLTCMP:
 830                if (is_manager(thrd))
 831                        return PL330_STATE_INVALID;
 832                else
 833                        return PL330_STATE_FAULT_COMPLETING;
 834        default:
 835                return PL330_STATE_INVALID;
 836        }
 837}
 838
 839/* If the request 'req' of thread 'thrd' is currently active */
 840static inline bool _req_active(struct pl330_thread *thrd,
 841                struct _pl330_req *req)
 842{
 843        void __iomem *regs = thrd->dmac->pinfo->base;
 844        u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
 845
 846        if (IS_FREE(req))
 847                return false;
 848
 849        return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
 850}
 851
 852/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
 853static inline unsigned _thrd_active(struct pl330_thread *thrd)
 854{
 855        if (_req_active(thrd, &thrd->req[0]))
 856                return 1; /* First req active */
 857
 858        if (_req_active(thrd, &thrd->req[1]))
 859                return 2; /* Second req active */
 860
 861        return 0;
 862}
 863
 864static void _stop(struct pl330_thread *thrd)
 865{
 866        void __iomem *regs = thrd->dmac->pinfo->base;
 867        u8 insn[6] = {0, 0, 0, 0, 0, 0};
 868
 869        if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
 870                UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
 871
 872        /* Return if nothing needs to be done */
 873        if (_state(thrd) == PL330_STATE_COMPLETING
 874                  || _state(thrd) == PL330_STATE_KILLING
 875                  || _state(thrd) == PL330_STATE_STOPPED)
 876                return;
 877
 878        _emit_KILL(0, insn);
 879
 880        /* Stop generating interrupts for SEV */
 881        writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
 882
 883        _execute_DBGINSN(thrd, insn, is_manager(thrd));
 884}
 885
 886/* Start doing req 'idx' of thread 'thrd' */
 887static bool _trigger(struct pl330_thread *thrd)
 888{
 889        void __iomem *regs = thrd->dmac->pinfo->base;
 890        struct _pl330_req *req;
 891        struct pl330_req *r;
 892        struct _arg_GO go;
 893        unsigned ns;
 894        u8 insn[6] = {0, 0, 0, 0, 0, 0};
 895
 896        /* Return if already ACTIVE */
 897        if (_state(thrd) != PL330_STATE_STOPPED)
 898                return true;
 899
 900        if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
 901                req = &thrd->req[1 - thrd->lstenq];
 902        else if (!IS_FREE(&thrd->req[thrd->lstenq]))
 903                req = &thrd->req[thrd->lstenq];
 904        else
 905                req = NULL;
 906
 907        /* Return if no request */
 908        if (!req || !req->r)
 909                return true;
 910
 911        r = req->r;
 912
 913        if (r->cfg)
 914                ns = r->cfg->nonsecure ? 1 : 0;
 915        else if (readl(regs + CS(thrd->id)) & CS_CNS)
 916                ns = 1;
 917        else
 918                ns = 0;
 919
 920        /* See 'Abort Sources' point-4 at Page 2-25 */
 921        if (_manager_ns(thrd) && !ns)
 922                dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
 923                        __func__, __LINE__);
 924
 925        go.chan = thrd->id;
 926        go.addr = req->mc_bus;
 927        go.ns = ns;
 928        _emit_GO(0, insn, &go);
 929
 930        /* Set to generate interrupts for SEV */
 931        writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
 932
 933        /* Only manager can execute GO */
 934        _execute_DBGINSN(thrd, insn, true);
 935
 936        return true;
 937}
 938
 939static bool _start(struct pl330_thread *thrd)
 940{
 941        switch (_state(thrd)) {
 942        case PL330_STATE_FAULT_COMPLETING:
 943                UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
 944
 945                if (_state(thrd) == PL330_STATE_KILLING)
 946                        UNTIL(thrd, PL330_STATE_STOPPED)
 947
 948        case PL330_STATE_FAULTING:
 949                _stop(thrd);
 950
 951        case PL330_STATE_KILLING:
 952        case PL330_STATE_COMPLETING:
 953                UNTIL(thrd, PL330_STATE_STOPPED)
 954
 955        case PL330_STATE_STOPPED:
 956                return _trigger(thrd);
 957
 958        case PL330_STATE_WFP:
 959        case PL330_STATE_QUEUEBUSY:
 960        case PL330_STATE_ATBARRIER:
 961        case PL330_STATE_UPDTPC:
 962        case PL330_STATE_CACHEMISS:
 963        case PL330_STATE_EXECUTING:
 964                return true;
 965
 966        case PL330_STATE_WFE: /* For RESUME, nothing yet */
 967        default:
 968                return false;
 969        }
 970}
 971
 972static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
 973                const struct _xfer_spec *pxs, int cyc)
 974{
 975        int off = 0;
 976
 977        while (cyc--) {
 978                off += _emit_LD(dry_run, &buf[off], ALWAYS);
 979                off += _emit_RMB(dry_run, &buf[off]);
 980                off += _emit_ST(dry_run, &buf[off], ALWAYS);
 981                off += _emit_WMB(dry_run, &buf[off]);
 982        }
 983
 984        return off;
 985}
 986
 987static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
 988                const struct _xfer_spec *pxs, int cyc)
 989{
 990        int off = 0;
 991
 992        while (cyc--) {
 993                off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
 994                off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
 995                off += _emit_ST(dry_run, &buf[off], ALWAYS);
 996                off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
 997        }
 998
 999        return off;
1000}
1001
1002static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
1003                const struct _xfer_spec *pxs, int cyc)
1004{
1005        int off = 0;
1006
1007        while (cyc--) {
1008                off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1009                off += _emit_LD(dry_run, &buf[off], ALWAYS);
1010                off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
1011                off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
1012        }
1013
1014        return off;
1015}
1016
1017static int _bursts(unsigned dry_run, u8 buf[],
1018                const struct _xfer_spec *pxs, int cyc)
1019{
1020        int off = 0;
1021
1022        switch (pxs->r->rqtype) {
1023        case MEMTODEV:
1024                off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
1025                break;
1026        case DEVTOMEM:
1027                off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
1028                break;
1029        case MEMTOMEM:
1030                off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1031                break;
1032        default:
1033                off += 0x40000000; /* Scare off the Client */
1034                break;
1035        }
1036
1037        return off;
1038}
1039
1040/* Returns bytes consumed and updates bursts */
1041static inline int _loop(unsigned dry_run, u8 buf[],
1042                unsigned long *bursts, const struct _xfer_spec *pxs)
1043{
1044        int cyc, cycmax, szlp, szlpend, szbrst, off;
1045        unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1046        struct _arg_LPEND lpend;
1047
1048        /* Max iterations possibile in DMALP is 256 */
1049        if (*bursts >= 256*256) {
1050                lcnt1 = 256;
1051                lcnt0 = 256;
1052                cyc = *bursts / lcnt1 / lcnt0;
1053        } else if (*bursts > 256) {
1054                lcnt1 = 256;
1055                lcnt0 = *bursts / lcnt1;
1056                cyc = 1;
1057        } else {
1058                lcnt1 = *bursts;
1059                lcnt0 = 0;
1060                cyc = 1;
1061        }
1062
1063        szlp = _emit_LP(1, buf, 0, 0);
1064        szbrst = _bursts(1, buf, pxs, 1);
1065
1066        lpend.cond = ALWAYS;
1067        lpend.forever = false;
1068        lpend.loop = 0;
1069        lpend.bjump = 0;
1070        szlpend = _emit_LPEND(1, buf, &lpend);
1071
1072        if (lcnt0) {
1073                szlp *= 2;
1074                szlpend *= 2;
1075        }
1076
1077        /*
1078         * Max bursts that we can unroll due to limit on the
1079         * size of backward jump that can be encoded in DMALPEND
1080         * which is 8-bits and hence 255
1081         */
1082        cycmax = (255 - (szlp + szlpend)) / szbrst;
1083
1084        cyc = (cycmax < cyc) ? cycmax : cyc;
1085
1086        off = 0;
1087
1088        if (lcnt0) {
1089                off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1090                ljmp0 = off;
1091        }
1092
1093        off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1094        ljmp1 = off;
1095
1096        off += _bursts(dry_run, &buf[off], pxs, cyc);
1097
1098        lpend.cond = ALWAYS;
1099        lpend.forever = false;
1100        lpend.loop = 1;
1101        lpend.bjump = off - ljmp1;
1102        off += _emit_LPEND(dry_run, &buf[off], &lpend);
1103
1104        if (lcnt0) {
1105                lpend.cond = ALWAYS;
1106                lpend.forever = false;
1107                lpend.loop = 0;
1108                lpend.bjump = off - ljmp0;
1109                off += _emit_LPEND(dry_run, &buf[off], &lpend);
1110        }
1111
1112        *bursts = lcnt1 * cyc;
1113        if (lcnt0)
1114                *bursts *= lcnt0;
1115
1116        return off;
1117}
1118
1119static inline int _setup_loops(unsigned dry_run, u8 buf[],
1120                const struct _xfer_spec *pxs)
1121{
1122        struct pl330_xfer *x = pxs->x;
1123        u32 ccr = pxs->ccr;
1124        unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1125        int off = 0;
1126
1127        while (bursts) {
1128                c = bursts;
1129                off += _loop(dry_run, &buf[off], &c, pxs);
1130                bursts -= c;
1131        }
1132
1133        return off;
1134}
1135
1136static inline int _setup_xfer(unsigned dry_run, u8 buf[],
1137                const struct _xfer_spec *pxs)
1138{
1139        struct pl330_xfer *x = pxs->x;
1140        int off = 0;
1141
1142        /* DMAMOV SAR, x->src_addr */
1143        off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1144        /* DMAMOV DAR, x->dst_addr */
1145        off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1146
1147        /* Setup Loop(s) */
1148        off += _setup_loops(dry_run, &buf[off], pxs);
1149
1150        return off;
1151}
1152
1153/*
1154 * A req is a sequence of one or more xfer units.
1155 * Returns the number of bytes taken to setup the MC for the req.
1156 */
1157static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
1158                unsigned index, struct _xfer_spec *pxs)
1159{
1160        struct _pl330_req *req = &thrd->req[index];
1161        struct pl330_xfer *x;
1162        u8 *buf = req->mc_cpu;
1163        int off = 0;
1164
1165        PL330_DBGMC_START(req->mc_bus);
1166
1167        /* DMAMOV CCR, ccr */
1168        off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1169
1170        x = pxs->r->x;
1171        do {
1172                /* Error if xfer length is not aligned at burst size */
1173                if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1174                        return -EINVAL;
1175
1176                pxs->x = x;
1177                off += _setup_xfer(dry_run, &buf[off], pxs);
1178
1179                x = x->next;
1180        } while (x);
1181
1182        /* DMASEV peripheral/event */
1183        off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1184        /* DMAEND */
1185        off += _emit_END(dry_run, &buf[off]);
1186
1187        return off;
1188}
1189
1190static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1191{
1192        u32 ccr = 0;
1193
1194        if (rqc->src_inc)
1195                ccr |= CC_SRCINC;
1196
1197        if (rqc->dst_inc)
1198                ccr |= CC_DSTINC;
1199
1200        /* We set same protection levels for Src and DST for now */
1201        if (rqc->privileged)
1202                ccr |= CC_SRCPRI | CC_DSTPRI;
1203        if (rqc->nonsecure)
1204                ccr |= CC_SRCNS | CC_DSTNS;
1205        if (rqc->insnaccess)
1206                ccr |= CC_SRCIA | CC_DSTIA;
1207
1208        ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1209        ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1210
1211        ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1212        ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1213
1214        ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
1215        ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
1216
1217        ccr |= (rqc->swap << CC_SWAP_SHFT);
1218
1219        return ccr;
1220}
1221
1222static inline bool _is_valid(u32 ccr)
1223{
1224        enum pl330_dstcachectrl dcctl;
1225        enum pl330_srccachectrl scctl;
1226
1227        dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
1228        scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
1229
1230        if (dcctl == DINVALID1 || dcctl == DINVALID2
1231                        || scctl == SINVALID1 || scctl == SINVALID2)
1232                return false;
1233        else
1234                return true;
1235}
1236
1237/*
1238 * Submit a list of xfers after which the client wants notification.
1239 * Client is not notified after each xfer unit, just once after all
1240 * xfer units are done or some error occurs.
1241 */
1242int pl330_submit_req(void *ch_id, struct pl330_req *r)
1243{
1244        struct pl330_thread *thrd = ch_id;
1245        struct pl330_dmac *pl330;
1246        struct pl330_info *pi;
1247        struct _xfer_spec xs;
1248        unsigned long flags;
1249        void __iomem *regs;
1250        unsigned idx;
1251        u32 ccr;
1252        int ret = 0;
1253
1254        /* No Req or Unacquired Channel or DMAC */
1255        if (!r || !thrd || thrd->free)
1256                return -EINVAL;
1257
1258        pl330 = thrd->dmac;
1259        pi = pl330->pinfo;
1260        regs = pi->base;
1261
1262        if (pl330->state == DYING
1263                || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1264                dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
1265                        __func__, __LINE__);
1266                return -EAGAIN;
1267        }
1268
1269        /* If request for non-existing peripheral */
1270        if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
1271                dev_info(thrd->dmac->pinfo->dev,
1272                                "%s:%d Invalid peripheral(%u)!\n",
1273                                __func__, __LINE__, r->peri);
1274                return -EINVAL;
1275        }
1276
1277        spin_lock_irqsave(&pl330->lock, flags);
1278
1279        if (_queue_full(thrd)) {
1280                ret = -EAGAIN;
1281                goto xfer_exit;
1282        }
1283
1284        /* Prefer Secure Channel */
1285        if (!_manager_ns(thrd))
1286                r->cfg->nonsecure = 0;
1287        else
1288                r->cfg->nonsecure = 1;
1289
1290        /* Use last settings, if not provided */
1291        if (r->cfg)
1292                ccr = _prepare_ccr(r->cfg);
1293        else
1294                ccr = readl(regs + CC(thrd->id));
1295
1296        /* If this req doesn't have valid xfer settings */
1297        if (!_is_valid(ccr)) {
1298                ret = -EINVAL;
1299                dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
1300                        __func__, __LINE__, ccr);
1301                goto xfer_exit;
1302        }
1303
1304        idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
1305
1306        xs.ccr = ccr;
1307        xs.r = r;
1308
1309        /* First dry run to check if req is acceptable */
1310        ret = _setup_req(1, thrd, idx, &xs);
1311        if (ret < 0)
1312                goto xfer_exit;
1313
1314        if (ret > pi->mcbufsz / 2) {
1315                dev_info(thrd->dmac->pinfo->dev,
1316                        "%s:%d Trying increasing mcbufsz\n",
1317                                __func__, __LINE__);
1318                ret = -ENOMEM;
1319                goto xfer_exit;
1320        }
1321
1322        /* Hook the request */
1323        thrd->lstenq = idx;
1324        thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
1325        thrd->req[idx].r = r;
1326
1327        ret = 0;
1328
1329xfer_exit:
1330        spin_unlock_irqrestore(&pl330->lock, flags);
1331
1332        return ret;
1333}
1334EXPORT_SYMBOL(pl330_submit_req);
1335
1336static void pl330_dotask(unsigned long data)
1337{
1338        struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1339        struct pl330_info *pi = pl330->pinfo;
1340        unsigned long flags;
1341        int i;
1342
1343        spin_lock_irqsave(&pl330->lock, flags);
1344
1345        /* The DMAC itself gone nuts */
1346        if (pl330->dmac_tbd.reset_dmac) {
1347                pl330->state = DYING;
1348                /* Reset the manager too */
1349                pl330->dmac_tbd.reset_mngr = true;
1350                /* Clear the reset flag */
1351                pl330->dmac_tbd.reset_dmac = false;
1352        }
1353
1354        if (pl330->dmac_tbd.reset_mngr) {
1355                _stop(pl330->manager);
1356                /* Reset all channels */
1357                pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
1358                /* Clear the reset flag */
1359                pl330->dmac_tbd.reset_mngr = false;
1360        }
1361
1362        for (i = 0; i < pi->pcfg.num_chan; i++) {
1363
1364                if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1365                        struct pl330_thread *thrd = &pl330->channels[i];
1366                        void __iomem *regs = pi->base;
1367                        enum pl330_op_err err;
1368
1369                        _stop(thrd);
1370
1371                        if (readl(regs + FSC) & (1 << thrd->id))
1372                                err = PL330_ERR_FAIL;
1373                        else
1374                                err = PL330_ERR_ABORT;
1375
1376                        spin_unlock_irqrestore(&pl330->lock, flags);
1377
1378                        _callback(thrd->req[1 - thrd->lstenq].r, err);
1379                        _callback(thrd->req[thrd->lstenq].r, err);
1380
1381                        spin_lock_irqsave(&pl330->lock, flags);
1382
1383                        thrd->req[0].r = NULL;
1384                        thrd->req[1].r = NULL;
1385                        MARK_FREE(&thrd->req[0]);
1386                        MARK_FREE(&thrd->req[1]);
1387
1388                        /* Clear the reset flag */
1389                        pl330->dmac_tbd.reset_chan &= ~(1 << i);
1390                }
1391        }
1392
1393        spin_unlock_irqrestore(&pl330->lock, flags);
1394
1395        return;
1396}
1397
1398/* Returns 1 if state was updated, 0 otherwise */
1399int pl330_update(const struct pl330_info *pi)
1400{
1401        struct _pl330_req *rqdone;
1402        struct pl330_dmac *pl330;
1403        unsigned long flags;
1404        void __iomem *regs;
1405        u32 val;
1406        int id, ev, ret = 0;
1407
1408        if (!pi || !pi->pl330_data)
1409                return 0;
1410
1411        regs = pi->base;
1412        pl330 = pi->pl330_data;
1413
1414        spin_lock_irqsave(&pl330->lock, flags);
1415
1416        val = readl(regs + FSM) & 0x1;
1417        if (val)
1418                pl330->dmac_tbd.reset_mngr = true;
1419        else
1420                pl330->dmac_tbd.reset_mngr = false;
1421
1422        val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
1423        pl330->dmac_tbd.reset_chan |= val;
1424        if (val) {
1425                int i = 0;
1426                while (i < pi->pcfg.num_chan) {
1427                        if (val & (1 << i)) {
1428                                dev_info(pi->dev,
1429                                        "Reset Channel-%d\t CS-%x FTC-%x\n",
1430                                                i, readl(regs + CS(i)),
1431                                                readl(regs + FTC(i)));
1432                                _stop(&pl330->channels[i]);
1433                        }
1434                        i++;
1435                }
1436        }
1437
1438        /* Check which event happened i.e, thread notified */
1439        val = readl(regs + ES);
1440        if (pi->pcfg.num_events < 32
1441                        && val & ~((1 << pi->pcfg.num_events) - 1)) {
1442                pl330->dmac_tbd.reset_dmac = true;
1443                dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
1444                ret = 1;
1445                goto updt_exit;
1446        }
1447
1448        for (ev = 0; ev < pi->pcfg.num_events; ev++) {
1449                if (val & (1 << ev)) { /* Event occured */
1450                        struct pl330_thread *thrd;
1451                        u32 inten = readl(regs + INTEN);
1452                        int active;
1453
1454                        /* Clear the event */
1455                        if (inten & (1 << ev))
1456                                writel(1 << ev, regs + INTCLR);
1457
1458                        ret = 1;
1459
1460                        id = pl330->events[ev];
1461
1462                        thrd = &pl330->channels[id];
1463
1464                        active = _thrd_active(thrd);
1465                        if (!active) /* Aborted */
1466                                continue;
1467
1468                        active -= 1;
1469
1470                        rqdone = &thrd->req[active];
1471                        MARK_FREE(rqdone);
1472
1473                        /* Get going again ASAP */
1474                        _start(thrd);
1475
1476                        /* For now, just make a list of callbacks to be done */
1477                        list_add_tail(&rqdone->rqd, &pl330->req_done);
1478                }
1479        }
1480
1481        /* Now that we are in no hurry, do the callbacks */
1482        while (!list_empty(&pl330->req_done)) {
1483                rqdone = container_of(pl330->req_done.next,
1484                                        struct _pl330_req, rqd);
1485
1486                list_del_init(&rqdone->rqd);
1487
1488                spin_unlock_irqrestore(&pl330->lock, flags);
1489                _callback(rqdone->r, PL330_ERR_NONE);
1490                spin_lock_irqsave(&pl330->lock, flags);
1491        }
1492
1493updt_exit:
1494        spin_unlock_irqrestore(&pl330->lock, flags);
1495
1496        if (pl330->dmac_tbd.reset_dmac
1497                        || pl330->dmac_tbd.reset_mngr
1498                        || pl330->dmac_tbd.reset_chan) {
1499                ret = 1;
1500                tasklet_schedule(&pl330->tasks);
1501        }
1502
1503        return ret;
1504}
1505EXPORT_SYMBOL(pl330_update);
1506
1507int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
1508{
1509        struct pl330_thread *thrd = ch_id;
1510        struct pl330_dmac *pl330;
1511        unsigned long flags;
1512        int ret = 0, active;
1513
1514        if (!thrd || thrd->free || thrd->dmac->state == DYING)
1515                return -EINVAL;
1516
1517        pl330 = thrd->dmac;
1518
1519        spin_lock_irqsave(&pl330->lock, flags);
1520
1521        switch (op) {
1522        case PL330_OP_FLUSH:
1523                /* Make sure the channel is stopped */
1524                _stop(thrd);
1525
1526                thrd->req[0].r = NULL;
1527                thrd->req[1].r = NULL;
1528                MARK_FREE(&thrd->req[0]);
1529                MARK_FREE(&thrd->req[1]);
1530                break;
1531
1532        case PL330_OP_ABORT:
1533                active = _thrd_active(thrd);
1534
1535                /* Make sure the channel is stopped */
1536                _stop(thrd);
1537
1538                /* ABORT is only for the active req */
1539                if (!active)
1540                        break;
1541
1542                active--;
1543
1544                thrd->req[active].r = NULL;
1545                MARK_FREE(&thrd->req[active]);
1546
1547                /* Start the next */
1548        case PL330_OP_START:
1549                if (!_start(thrd))
1550                        ret = -EIO;
1551                break;
1552
1553        default:
1554                ret = -EINVAL;
1555        }
1556
1557        spin_unlock_irqrestore(&pl330->lock, flags);
1558        return ret;
1559}
1560EXPORT_SYMBOL(pl330_chan_ctrl);
1561
1562int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
1563{
1564        struct pl330_thread *thrd = ch_id;
1565        struct pl330_dmac *pl330;
1566        struct pl330_info *pi;
1567        void __iomem *regs;
1568        int active;
1569        u32 val;
1570
1571        if (!pstatus || !thrd || thrd->free)
1572                return -EINVAL;
1573
1574        pl330 = thrd->dmac;
1575        pi = pl330->pinfo;
1576        regs = pi->base;
1577
1578        /* The client should remove the DMAC and add again */
1579        if (pl330->state == DYING)
1580                pstatus->dmac_halted = true;
1581        else
1582                pstatus->dmac_halted = false;
1583
1584        val = readl(regs + FSC);
1585        if (val & (1 << thrd->id))
1586                pstatus->faulting = true;
1587        else
1588                pstatus->faulting = false;
1589
1590        active = _thrd_active(thrd);
1591
1592        if (!active) {
1593                /* Indicate that the thread is not running */
1594                pstatus->top_req = NULL;
1595                pstatus->wait_req = NULL;
1596        } else {
1597                active--;
1598                pstatus->top_req = thrd->req[active].r;
1599                pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
1600                                        ? thrd->req[1 - active].r : NULL;
1601        }
1602
1603        pstatus->src_addr = readl(regs + SA(thrd->id));
1604        pstatus->dst_addr = readl(regs + DA(thrd->id));
1605
1606        return 0;
1607}
1608EXPORT_SYMBOL(pl330_chan_status);
1609
1610/* Reserve an event */
1611static inline int _alloc_event(struct pl330_thread *thrd)
1612{
1613        struct pl330_dmac *pl330 = thrd->dmac;
1614        struct pl330_info *pi = pl330->pinfo;
1615        int ev;
1616
1617        for (ev = 0; ev < pi->pcfg.num_events; ev++)
1618                if (pl330->events[ev] == -1) {
1619                        pl330->events[ev] = thrd->id;
1620                        return ev;
1621                }
1622
1623        return -1;
1624}
1625
1626/* Upon success, returns IdentityToken for the
1627 * allocated channel, NULL otherwise.
1628 */
1629void *pl330_request_channel(const struct pl330_info *pi)
1630{
1631        struct pl330_thread *thrd = NULL;
1632        struct pl330_dmac *pl330;
1633        unsigned long flags;
1634        int chans, i;
1635
1636        if (!pi || !pi->pl330_data)
1637                return NULL;
1638
1639        pl330 = pi->pl330_data;
1640
1641        if (pl330->state == DYING)
1642                return NULL;
1643
1644        chans = pi->pcfg.num_chan;
1645
1646        spin_lock_irqsave(&pl330->lock, flags);
1647
1648        for (i = 0; i < chans; i++) {
1649                thrd = &pl330->channels[i];
1650                if (thrd->free) {
1651                        thrd->ev = _alloc_event(thrd);
1652                        if (thrd->ev >= 0) {
1653                                thrd->free = false;
1654                                thrd->lstenq = 1;
1655                                thrd->req[0].r = NULL;
1656                                MARK_FREE(&thrd->req[0]);
1657                                thrd->req[1].r = NULL;
1658                                MARK_FREE(&thrd->req[1]);
1659                                break;
1660                        }
1661                }
1662                thrd = NULL;
1663        }
1664
1665        spin_unlock_irqrestore(&pl330->lock, flags);
1666
1667        return thrd;
1668}
1669EXPORT_SYMBOL(pl330_request_channel);
1670
1671/* Release an event */
1672static inline void _free_event(struct pl330_thread *thrd, int ev)
1673{
1674        struct pl330_dmac *pl330 = thrd->dmac;
1675        struct pl330_info *pi = pl330->pinfo;
1676
1677        /* If the event is valid and was held by the thread */
1678        if (ev >= 0 && ev < pi->pcfg.num_events
1679                        && pl330->events[ev] == thrd->id)
1680                pl330->events[ev] = -1;
1681}
1682
1683void pl330_release_channel(void *ch_id)
1684{
1685        struct pl330_thread *thrd = ch_id;
1686        struct pl330_dmac *pl330;
1687        unsigned long flags;
1688
1689        if (!thrd || thrd->free)
1690                return;
1691
1692        _stop(thrd);
1693
1694        _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
1695        _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
1696
1697        pl330 = thrd->dmac;
1698
1699        spin_lock_irqsave(&pl330->lock, flags);
1700        _free_event(thrd, thrd->ev);
1701        thrd->free = true;
1702        spin_unlock_irqrestore(&pl330->lock, flags);
1703}
1704EXPORT_SYMBOL(pl330_release_channel);
1705
1706/* Initialize the structure for PL330 configuration, that can be used
1707 * by the client driver the make best use of the DMAC
1708 */
1709static void read_dmac_config(struct pl330_info *pi)
1710{
1711        void __iomem *regs = pi->base;
1712        u32 val;
1713
1714        val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1715        val &= CRD_DATA_WIDTH_MASK;
1716        pi->pcfg.data_bus_width = 8 * (1 << val);
1717
1718        val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1719        val &= CRD_DATA_BUFF_MASK;
1720        pi->pcfg.data_buf_dep = val + 1;
1721
1722        val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1723        val &= CR0_NUM_CHANS_MASK;
1724        val += 1;
1725        pi->pcfg.num_chan = val;
1726
1727        val = readl(regs + CR0);
1728        if (val & CR0_PERIPH_REQ_SET) {
1729                val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1730                val += 1;
1731                pi->pcfg.num_peri = val;
1732                pi->pcfg.peri_ns = readl(regs + CR4);
1733        } else {
1734                pi->pcfg.num_peri = 0;
1735        }
1736
1737        val = readl(regs + CR0);
1738        if (val & CR0_BOOT_MAN_NS)
1739                pi->pcfg.mode |= DMAC_MODE_NS;
1740        else
1741                pi->pcfg.mode &= ~DMAC_MODE_NS;
1742
1743        val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1744        val &= CR0_NUM_EVENTS_MASK;
1745        val += 1;
1746        pi->pcfg.num_events = val;
1747
1748        pi->pcfg.irq_ns = readl(regs + CR3);
1749
1750        pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
1751        pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
1752}
1753
1754static inline void _reset_thread(struct pl330_thread *thrd)
1755{
1756        struct pl330_dmac *pl330 = thrd->dmac;
1757        struct pl330_info *pi = pl330->pinfo;
1758
1759        thrd->req[0].mc_cpu = pl330->mcode_cpu
1760                                + (thrd->id * pi->mcbufsz);
1761        thrd->req[0].mc_bus = pl330->mcode_bus
1762                                + (thrd->id * pi->mcbufsz);
1763        thrd->req[0].r = NULL;
1764        MARK_FREE(&thrd->req[0]);
1765
1766        thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1767                                + pi->mcbufsz / 2;
1768        thrd->req[1].mc_bus = thrd->req[0].mc_bus
1769                                + pi->mcbufsz / 2;
1770        thrd->req[1].r = NULL;
1771        MARK_FREE(&thrd->req[1]);
1772}
1773
1774static int dmac_alloc_threads(struct pl330_dmac *pl330)
1775{
1776        struct pl330_info *pi = pl330->pinfo;
1777        int chans = pi->pcfg.num_chan;
1778        struct pl330_thread *thrd;
1779        int i;
1780
1781        /* Allocate 1 Manager and 'chans' Channel threads */
1782        pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
1783                                        GFP_KERNEL);
1784        if (!pl330->channels)
1785                return -ENOMEM;
1786
1787        /* Init Channel threads */
1788        for (i = 0; i < chans; i++) {
1789                thrd = &pl330->channels[i];
1790                thrd->id = i;
1791                thrd->dmac = pl330;
1792                _reset_thread(thrd);
1793                thrd->free = true;
1794        }
1795
1796        /* MANAGER is indexed at the end */
1797        thrd = &pl330->channels[chans];
1798        thrd->id = chans;
1799        thrd->dmac = pl330;
1800        thrd->free = false;
1801        pl330->manager = thrd;
1802
1803        return 0;
1804}
1805
1806static int dmac_alloc_resources(struct pl330_dmac *pl330)
1807{
1808        struct pl330_info *pi = pl330->pinfo;
1809        int chans = pi->pcfg.num_chan;
1810        int ret;
1811
1812        /*
1813         * Alloc MicroCode buffer for 'chans' Channel threads.
1814         * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1815         */
1816        pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
1817                                chans * pi->mcbufsz,
1818                                &pl330->mcode_bus, GFP_KERNEL);
1819        if (!pl330->mcode_cpu) {
1820                dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
1821                        __func__, __LINE__);
1822                return -ENOMEM;
1823        }
1824
1825        ret = dmac_alloc_threads(pl330);
1826        if (ret) {
1827                dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
1828                        __func__, __LINE__);
1829                dma_free_coherent(pi->dev,
1830                                chans * pi->mcbufsz,
1831                                pl330->mcode_cpu, pl330->mcode_bus);
1832                return ret;
1833        }
1834
1835        return 0;
1836}
1837
1838int pl330_add(struct pl330_info *pi)
1839{
1840        struct pl330_dmac *pl330;
1841        void __iomem *regs;
1842        int i, ret;
1843
1844        if (!pi || !pi->dev)
1845                return -EINVAL;
1846
1847        /* If already added */
1848        if (pi->pl330_data)
1849                return -EINVAL;
1850
1851        /*
1852         * If the SoC can perform reset on the DMAC, then do it
1853         * before reading its configuration.
1854         */
1855        if (pi->dmac_reset)
1856                pi->dmac_reset(pi);
1857
1858        regs = pi->base;
1859
1860        /* Check if we can handle this DMAC */
1861        if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
1862           || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
1863                dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
1864                        get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
1865                return -EINVAL;
1866        }
1867
1868        /* Read the configuration of the DMAC */
1869        read_dmac_config(pi);
1870
1871        if (pi->pcfg.num_events == 0) {
1872                dev_err(pi->dev, "%s:%d Can't work without events!\n",
1873                        __func__, __LINE__);
1874                return -EINVAL;
1875        }
1876
1877        pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
1878        if (!pl330) {
1879                dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
1880                        __func__, __LINE__);
1881                return -ENOMEM;
1882        }
1883
1884        /* Assign the info structure and private data */
1885        pl330->pinfo = pi;
1886        pi->pl330_data = pl330;
1887
1888        spin_lock_init(&pl330->lock);
1889
1890        INIT_LIST_HEAD(&pl330->req_done);
1891
1892        /* Use default MC buffer size if not provided */
1893        if (!pi->mcbufsz)
1894                pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1895
1896        /* Mark all events as free */
1897        for (i = 0; i < pi->pcfg.num_events; i++)
1898                pl330->events[i] = -1;
1899
1900        /* Allocate resources needed by the DMAC */
1901        ret = dmac_alloc_resources(pl330);
1902        if (ret) {
1903                dev_err(pi->dev, "Unable to create channels for DMAC\n");
1904                kfree(pl330);
1905                return ret;
1906        }
1907
1908        tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1909
1910        pl330->state = INIT;
1911
1912        return 0;
1913}
1914EXPORT_SYMBOL(pl330_add);
1915
1916static int dmac_free_threads(struct pl330_dmac *pl330)
1917{
1918        struct pl330_info *pi = pl330->pinfo;
1919        int chans = pi->pcfg.num_chan;
1920        struct pl330_thread *thrd;
1921        int i;
1922
1923        /* Release Channel threads */
1924        for (i = 0; i < chans; i++) {
1925                thrd = &pl330->channels[i];
1926                pl330_release_channel((void *)thrd);
1927        }
1928
1929        /* Free memory */
1930        kfree(pl330->channels);
1931
1932        return 0;
1933}
1934
1935static void dmac_free_resources(struct pl330_dmac *pl330)
1936{
1937        struct pl330_info *pi = pl330->pinfo;
1938        int chans = pi->pcfg.num_chan;
1939
1940        dmac_free_threads(pl330);
1941
1942        dma_free_coherent(pi->dev, chans * pi->mcbufsz,
1943                                pl330->mcode_cpu, pl330->mcode_bus);
1944}
1945
1946void pl330_del(struct pl330_info *pi)
1947{
1948        struct pl330_dmac *pl330;
1949
1950        if (!pi || !pi->pl330_data)
1951                return;
1952
1953        pl330 = pi->pl330_data;
1954
1955        pl330->state = UNINIT;
1956
1957        tasklet_kill(&pl330->tasks);
1958
1959        /* Free DMAC resources */
1960        dmac_free_resources(pl330);
1961
1962        kfree(pl330);
1963        pi->pl330_data = NULL;
1964}
1965EXPORT_SYMBOL(pl330_del);
1966