linux/arch/arm/mach-omap1/lcd_dma.c
<<
>>
Prefs
   1/*
   2 * linux/arch/arm/mach-omap1/lcd_dma.c
   3 *
   4 * Extracted from arch/arm/plat-omap/dma.c
   5 * Copyright (C) 2003 - 2008 Nokia Corporation
   6 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
   7 * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
   8 * Graphics DMA and LCD DMA graphics tranformations
   9 * by Imre Deak <imre.deak@nokia.com>
  10 * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
  11 * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  12 * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  13 *
  14 * Copyright (C) 2009 Texas Instruments
  15 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
  16 *
  17 * Support functions for the OMAP internal DMA channels.
  18 *
  19 * This program is free software; you can redistribute it and/or modify
  20 * it under the terms of the GNU General Public License version 2 as
  21 * published by the Free Software Foundation.
  22 *
  23 */
  24
  25#include <linux/module.h>
  26#include <linux/spinlock.h>
  27#include <linux/interrupt.h>
  28#include <linux/io.h>
  29
  30#include <mach/hardware.h>
  31#include <mach/lcdc.h>
  32#include <plat/dma.h>
  33
  34int omap_lcd_dma_running(void)
  35{
  36        /*
  37         * On OMAP1510, internal LCD controller will start the transfer
  38         * when it gets enabled, so assume DMA running if LCD enabled.
  39         */
  40        if (cpu_is_omap15xx())
  41                if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
  42                        return 1;
  43
  44        /* Check if LCD DMA is running */
  45        if (cpu_is_omap16xx())
  46                if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
  47                        return 1;
  48
  49        return 0;
  50}
  51
  52static struct lcd_dma_info {
  53        spinlock_t lock;
  54        int reserved;
  55        void (*callback)(u16 status, void *data);
  56        void *cb_data;
  57
  58        int active;
  59        unsigned long addr, size;
  60        int rotate, data_type, xres, yres;
  61        int vxres;
  62        int mirror;
  63        int xscale, yscale;
  64        int ext_ctrl;
  65        int src_port;
  66        int single_transfer;
  67} lcd_dma;
  68
  69void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
  70                         int data_type)
  71{
  72        lcd_dma.addr = addr;
  73        lcd_dma.data_type = data_type;
  74        lcd_dma.xres = fb_xres;
  75        lcd_dma.yres = fb_yres;
  76}
  77EXPORT_SYMBOL(omap_set_lcd_dma_b1);
  78
  79void omap_set_lcd_dma_src_port(int port)
  80{
  81        lcd_dma.src_port = port;
  82}
  83
  84void omap_set_lcd_dma_ext_controller(int external)
  85{
  86        lcd_dma.ext_ctrl = external;
  87}
  88EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
  89
  90void omap_set_lcd_dma_single_transfer(int single)
  91{
  92        lcd_dma.single_transfer = single;
  93}
  94EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
  95
  96void omap_set_lcd_dma_b1_rotation(int rotate)
  97{
  98        if (cpu_is_omap15xx()) {
  99                printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
 100                BUG();
 101                return;
 102        }
 103        lcd_dma.rotate = rotate;
 104}
 105EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 106
 107void omap_set_lcd_dma_b1_mirror(int mirror)
 108{
 109        if (cpu_is_omap15xx()) {
 110                printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
 111                BUG();
 112        }
 113        lcd_dma.mirror = mirror;
 114}
 115EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 116
 117void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 118{
 119        if (cpu_is_omap15xx()) {
 120                printk(KERN_ERR "DMA virtual resulotion is not supported "
 121                                "in 1510 mode\n");
 122                BUG();
 123        }
 124        lcd_dma.vxres = vxres;
 125}
 126EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 127
 128void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 129{
 130        if (cpu_is_omap15xx()) {
 131                printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
 132                BUG();
 133        }
 134        lcd_dma.xscale = xscale;
 135        lcd_dma.yscale = yscale;
 136}
 137EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
 138
 139static void set_b1_regs(void)
 140{
 141        unsigned long top, bottom;
 142        int es;
 143        u16 w;
 144        unsigned long en, fn;
 145        long ei, fi;
 146        unsigned long vxres;
 147        unsigned int xscale, yscale;
 148
 149        switch (lcd_dma.data_type) {
 150        case OMAP_DMA_DATA_TYPE_S8:
 151                es = 1;
 152                break;
 153        case OMAP_DMA_DATA_TYPE_S16:
 154                es = 2;
 155                break;
 156        case OMAP_DMA_DATA_TYPE_S32:
 157                es = 4;
 158                break;
 159        default:
 160                BUG();
 161                return;
 162        }
 163
 164        vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
 165        xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
 166        yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
 167        BUG_ON(vxres < lcd_dma.xres);
 168
 169#define PIXADDR(x, y) (lcd_dma.addr +                                   \
 170                ((y) * vxres * yscale + (x) * xscale) * es)
 171#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
 172
 173        switch (lcd_dma.rotate) {
 174        case 0:
 175                if (!lcd_dma.mirror) {
 176                        top = PIXADDR(0, 0);
 177                        bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 178                        /* 1510 DMA requires the bottom address to be 2 more
 179                         * than the actual last memory access location. */
 180                        if (cpu_is_omap15xx() &&
 181                                lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
 182                                        bottom += 2;
 183                        ei = PIXSTEP(0, 0, 1, 0);
 184                        fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
 185                } else {
 186                        top = PIXADDR(lcd_dma.xres - 1, 0);
 187                        bottom = PIXADDR(0, lcd_dma.yres - 1);
 188                        ei = PIXSTEP(1, 0, 0, 0);
 189                        fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
 190                }
 191                en = lcd_dma.xres;
 192                fn = lcd_dma.yres;
 193                break;
 194        case 90:
 195                if (!lcd_dma.mirror) {
 196                        top = PIXADDR(0, lcd_dma.yres - 1);
 197                        bottom = PIXADDR(lcd_dma.xres - 1, 0);
 198                        ei = PIXSTEP(0, 1, 0, 0);
 199                        fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
 200                } else {
 201                        top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 202                        bottom = PIXADDR(0, 0);
 203                        ei = PIXSTEP(0, 1, 0, 0);
 204                        fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
 205                }
 206                en = lcd_dma.yres;
 207                fn = lcd_dma.xres;
 208                break;
 209        case 180:
 210                if (!lcd_dma.mirror) {
 211                        top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 212                        bottom = PIXADDR(0, 0);
 213                        ei = PIXSTEP(1, 0, 0, 0);
 214                        fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
 215                } else {
 216                        top = PIXADDR(0, lcd_dma.yres - 1);
 217                        bottom = PIXADDR(lcd_dma.xres - 1, 0);
 218                        ei = PIXSTEP(0, 0, 1, 0);
 219                        fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
 220                }
 221                en = lcd_dma.xres;
 222                fn = lcd_dma.yres;
 223                break;
 224        case 270:
 225                if (!lcd_dma.mirror) {
 226                        top = PIXADDR(lcd_dma.xres - 1, 0);
 227                        bottom = PIXADDR(0, lcd_dma.yres - 1);
 228                        ei = PIXSTEP(0, 0, 0, 1);
 229                        fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
 230                } else {
 231                        top = PIXADDR(0, 0);
 232                        bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 233                        ei = PIXSTEP(0, 0, 0, 1);
 234                        fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
 235                }
 236                en = lcd_dma.yres;
 237                fn = lcd_dma.xres;
 238                break;
 239        default:
 240                BUG();
 241                return; /* Suppress warning about uninitialized vars */
 242        }
 243
 244        if (cpu_is_omap15xx()) {
 245                omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
 246                omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
 247                omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
 248                omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
 249
 250                return;
 251        }
 252
 253        /* 1610 regs */
 254        omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
 255        omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
 256        omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
 257        omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
 258
 259        omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
 260        omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
 261
 262        w = omap_readw(OMAP1610_DMA_LCD_CSDP);
 263        w &= ~0x03;
 264        w |= lcd_dma.data_type;
 265        omap_writew(w, OMAP1610_DMA_LCD_CSDP);
 266
 267        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 268        /* Always set the source port as SDRAM for now*/
 269        w &= ~(0x03 << 6);
 270        if (lcd_dma.callback != NULL)
 271                w |= 1 << 1;            /* Block interrupt enable */
 272        else
 273                w &= ~(1 << 1);
 274        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 275
 276        if (!(lcd_dma.rotate || lcd_dma.mirror ||
 277              lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
 278                return;
 279
 280        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 281        /* Set the double-indexed addressing mode */
 282        w |= (0x03 << 12);
 283        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 284
 285        omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
 286        omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
 287        omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
 288}
 289
 290static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
 291{
 292        u16 w;
 293
 294        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 295        if (unlikely(!(w & (1 << 3)))) {
 296                printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
 297                return IRQ_NONE;
 298        }
 299        /* Ack the IRQ */
 300        w |= (1 << 3);
 301        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 302        lcd_dma.active = 0;
 303        if (lcd_dma.callback != NULL)
 304                lcd_dma.callback(w, lcd_dma.cb_data);
 305
 306        return IRQ_HANDLED;
 307}
 308
 309int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
 310                         void *data)
 311{
 312        spin_lock_irq(&lcd_dma.lock);
 313        if (lcd_dma.reserved) {
 314                spin_unlock_irq(&lcd_dma.lock);
 315                printk(KERN_ERR "LCD DMA channel already reserved\n");
 316                BUG();
 317                return -EBUSY;
 318        }
 319        lcd_dma.reserved = 1;
 320        spin_unlock_irq(&lcd_dma.lock);
 321        lcd_dma.callback = callback;
 322        lcd_dma.cb_data = data;
 323        lcd_dma.active = 0;
 324        lcd_dma.single_transfer = 0;
 325        lcd_dma.rotate = 0;
 326        lcd_dma.vxres = 0;
 327        lcd_dma.mirror = 0;
 328        lcd_dma.xscale = 0;
 329        lcd_dma.yscale = 0;
 330        lcd_dma.ext_ctrl = 0;
 331        lcd_dma.src_port = 0;
 332
 333        return 0;
 334}
 335EXPORT_SYMBOL(omap_request_lcd_dma);
 336
 337void omap_free_lcd_dma(void)
 338{
 339        spin_lock(&lcd_dma.lock);
 340        if (!lcd_dma.reserved) {
 341                spin_unlock(&lcd_dma.lock);
 342                printk(KERN_ERR "LCD DMA is not reserved\n");
 343                BUG();
 344                return;
 345        }
 346        if (!cpu_is_omap15xx())
 347                omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
 348                            OMAP1610_DMA_LCD_CCR);
 349        lcd_dma.reserved = 0;
 350        spin_unlock(&lcd_dma.lock);
 351}
 352EXPORT_SYMBOL(omap_free_lcd_dma);
 353
 354void omap_enable_lcd_dma(void)
 355{
 356        u16 w;
 357
 358        /*
 359         * Set the Enable bit only if an external controller is
 360         * connected. Otherwise the OMAP internal controller will
 361         * start the transfer when it gets enabled.
 362         */
 363        if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 364                return;
 365
 366        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 367        w |= 1 << 8;
 368        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 369
 370        lcd_dma.active = 1;
 371
 372        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 373        w |= 1 << 7;
 374        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 375}
 376EXPORT_SYMBOL(omap_enable_lcd_dma);
 377
 378void omap_setup_lcd_dma(void)
 379{
 380        BUG_ON(lcd_dma.active);
 381        if (!cpu_is_omap15xx()) {
 382                /* Set some reasonable defaults */
 383                omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
 384                omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
 385                omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
 386        }
 387        set_b1_regs();
 388        if (!cpu_is_omap15xx()) {
 389                u16 w;
 390
 391                w = omap_readw(OMAP1610_DMA_LCD_CCR);
 392                /*
 393                 * If DMA was already active set the end_prog bit to have
 394                 * the programmed register set loaded into the active
 395                 * register set.
 396                 */
 397                w |= 1 << 11;           /* End_prog */
 398                if (!lcd_dma.single_transfer)
 399                        w |= (3 << 8);  /* Auto_init, repeat */
 400                omap_writew(w, OMAP1610_DMA_LCD_CCR);
 401        }
 402}
 403EXPORT_SYMBOL(omap_setup_lcd_dma);
 404
 405void omap_stop_lcd_dma(void)
 406{
 407        u16 w;
 408
 409        lcd_dma.active = 0;
 410        if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 411                return;
 412
 413        w = omap_readw(OMAP1610_DMA_LCD_CCR);
 414        w &= ~(1 << 7);
 415        omap_writew(w, OMAP1610_DMA_LCD_CCR);
 416
 417        w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 418        w &= ~(1 << 8);
 419        omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 420}
 421EXPORT_SYMBOL(omap_stop_lcd_dma);
 422
 423static int __init omap_init_lcd_dma(void)
 424{
 425        int r;
 426
 427        if (!cpu_class_is_omap1())
 428                return -ENODEV;
 429
 430        if (cpu_is_omap16xx()) {
 431                u16 w;
 432
 433                /* this would prevent OMAP sleep */
 434                w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 435                w &= ~(1 << 8);
 436                omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 437        }
 438
 439        spin_lock_init(&lcd_dma.lock);
 440
 441        r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
 442                        "LCD DMA", NULL);
 443        if (r != 0)
 444                printk(KERN_ERR "unable to request IRQ for LCD DMA "
 445                               "(error %d)\n", r);
 446
 447        return r;
 448}
 449
 450arch_initcall(omap_init_lcd_dma);
 451
 452