1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19#include <linux/kernel.h>
20#include <linux/init.h>
21#include <linux/platform_device.h>
22#include <linux/clk.h>
23#include <linux/io.h>
24#include <linux/leds.h>
25#include <linux/gpio.h>
26#include <linux/usb/otg.h>
27#include <linux/i2c/twl.h>
28#include <linux/regulator/machine.h>
29
30#include <mach/hardware.h>
31#include <mach/omap4-common.h>
32#include <asm/mach-types.h>
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35
36#include <plat/board.h>
37#include <plat/common.h>
38#include <plat/usb.h>
39#include <plat/mmc.h>
40#include "timer-gp.h"
41
42#include "hsmmc.h"
43#include "control.h"
44#include "mux.h"
45
46#define GPIO_HUB_POWER 1
47#define GPIO_HUB_NRESET 62
48
49static struct gpio_led gpio_leds[] = {
50 {
51 .name = "pandaboard::status1",
52 .default_trigger = "heartbeat",
53 .gpio = 7,
54 },
55 {
56 .name = "pandaboard::status2",
57 .default_trigger = "mmc0",
58 .gpio = 8,
59 },
60};
61
62static struct gpio_led_platform_data gpio_led_info = {
63 .leds = gpio_leds,
64 .num_leds = ARRAY_SIZE(gpio_leds),
65};
66
67static struct platform_device leds_gpio = {
68 .name = "leds-gpio",
69 .id = -1,
70 .dev = {
71 .platform_data = &gpio_led_info,
72 },
73};
74
75static struct platform_device *panda_devices[] __initdata = {
76 &leds_gpio,
77};
78
79static void __init omap4_panda_init_irq(void)
80{
81 omap2_init_common_infrastructure();
82 omap2_init_common_devices(NULL, NULL);
83 gic_init_irq();
84}
85
86static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
87 .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
88 .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
89 .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
90 .phy_reset = false,
91 .reset_gpio_port[0] = -EINVAL,
92 .reset_gpio_port[1] = -EINVAL,
93 .reset_gpio_port[2] = -EINVAL
94};
95
96static void __init omap4_ehci_init(void)
97{
98 int ret;
99 struct clk *phy_ref_clk;
100
101
102 phy_ref_clk = clk_get(NULL, "auxclk3_ck");
103 if (IS_ERR(phy_ref_clk)) {
104 pr_err("Cannot request auxclk3\n");
105 goto error1;
106 }
107 clk_set_rate(phy_ref_clk, 19200000);
108 clk_enable(phy_ref_clk);
109
110
111 ret = gpio_request(GPIO_HUB_POWER, "hub_power");
112 if (ret) {
113 pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER);
114 goto error1;
115 }
116 gpio_export(GPIO_HUB_POWER, 0);
117 gpio_direction_output(GPIO_HUB_POWER, 0);
118 gpio_set_value(GPIO_HUB_POWER, 0);
119
120
121 ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset");
122 if (ret) {
123 pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET);
124 goto error2;
125 }
126 gpio_export(GPIO_HUB_NRESET, 0);
127 gpio_direction_output(GPIO_HUB_NRESET, 0);
128 gpio_set_value(GPIO_HUB_NRESET, 0);
129 gpio_set_value(GPIO_HUB_NRESET, 1);
130
131 usb_ehci_init(&ehci_pdata);
132
133
134 gpio_set_value(GPIO_HUB_POWER, 1);
135 return;
136
137error2:
138 gpio_free(GPIO_HUB_POWER);
139error1:
140 pr_err("Unable to initialize EHCI power/reset\n");
141 return;
142
143}
144
145static struct omap_musb_board_data musb_board_data = {
146 .interface_type = MUSB_INTERFACE_UTMI,
147 .mode = MUSB_OTG,
148 .power = 100,
149};
150
151static struct twl4030_usb_data omap4_usbphy_data = {
152 .phy_init = omap4430_phy_init,
153 .phy_exit = omap4430_phy_exit,
154 .phy_power = omap4430_phy_power,
155 .phy_set_clock = omap4430_phy_set_clk,
156};
157
158static struct omap2_hsmmc_info mmc[] = {
159 {
160 .mmc = 1,
161 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
162 .gpio_wp = -EINVAL,
163 .gpio_cd = -EINVAL,
164 },
165 {}
166};
167
168static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
169 {
170 .supply = "vmmc",
171 .dev_name = "mmci-omap-hs.0",
172 },
173};
174
175static int omap4_twl6030_hsmmc_late_init(struct device *dev)
176{
177 int ret = 0;
178 struct platform_device *pdev = container_of(dev,
179 struct platform_device, dev);
180 struct omap_mmc_platform_data *pdata = dev->platform_data;
181
182 if (!pdata) {
183 dev_err(dev, "%s: NULL platform data\n", __func__);
184 return -EINVAL;
185 }
186
187 if (pdev->id == 0) {
188 ret = twl6030_mmc_card_detect_config();
189 if (ret)
190 dev_err(dev, "%s: Error card detect config(%d)\n",
191 __func__, ret);
192 else
193 pdata->slots[0].card_detect = twl6030_mmc_card_detect;
194 }
195 return ret;
196}
197
198static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
199{
200 struct omap_mmc_platform_data *pdata;
201
202
203 if (!dev) {
204 pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
205 return;
206 }
207 pdata = dev->platform_data;
208
209 pdata->init = omap4_twl6030_hsmmc_late_init;
210}
211
212static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
213{
214 struct omap2_hsmmc_info *c;
215
216 omap2_hsmmc_init(controllers);
217 for (c = controllers; c->mmc; c++)
218 omap4_twl6030_hsmmc_set_late_init(c->dev);
219
220 return 0;
221}
222
223static struct regulator_init_data omap4_panda_vaux1 = {
224 .constraints = {
225 .min_uV = 1000000,
226 .max_uV = 3000000,
227 .apply_uV = true,
228 .valid_modes_mask = REGULATOR_MODE_NORMAL
229 | REGULATOR_MODE_STANDBY,
230 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
231 | REGULATOR_CHANGE_MODE
232 | REGULATOR_CHANGE_STATUS,
233 },
234};
235
236static struct regulator_init_data omap4_panda_vaux2 = {
237 .constraints = {
238 .min_uV = 1200000,
239 .max_uV = 2800000,
240 .apply_uV = true,
241 .valid_modes_mask = REGULATOR_MODE_NORMAL
242 | REGULATOR_MODE_STANDBY,
243 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
244 | REGULATOR_CHANGE_MODE
245 | REGULATOR_CHANGE_STATUS,
246 },
247};
248
249static struct regulator_init_data omap4_panda_vaux3 = {
250 .constraints = {
251 .min_uV = 1000000,
252 .max_uV = 3000000,
253 .apply_uV = true,
254 .valid_modes_mask = REGULATOR_MODE_NORMAL
255 | REGULATOR_MODE_STANDBY,
256 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
257 | REGULATOR_CHANGE_MODE
258 | REGULATOR_CHANGE_STATUS,
259 },
260};
261
262
263static struct regulator_init_data omap4_panda_vmmc = {
264 .constraints = {
265 .min_uV = 1200000,
266 .max_uV = 3000000,
267 .apply_uV = true,
268 .valid_modes_mask = REGULATOR_MODE_NORMAL
269 | REGULATOR_MODE_STANDBY,
270 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
271 | REGULATOR_CHANGE_MODE
272 | REGULATOR_CHANGE_STATUS,
273 },
274 .num_consumer_supplies = 1,
275 .consumer_supplies = omap4_panda_vmmc_supply,
276};
277
278static struct regulator_init_data omap4_panda_vpp = {
279 .constraints = {
280 .min_uV = 1800000,
281 .max_uV = 2500000,
282 .apply_uV = true,
283 .valid_modes_mask = REGULATOR_MODE_NORMAL
284 | REGULATOR_MODE_STANDBY,
285 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
286 | REGULATOR_CHANGE_MODE
287 | REGULATOR_CHANGE_STATUS,
288 },
289};
290
291static struct regulator_init_data omap4_panda_vusim = {
292 .constraints = {
293 .min_uV = 1200000,
294 .max_uV = 2900000,
295 .apply_uV = true,
296 .valid_modes_mask = REGULATOR_MODE_NORMAL
297 | REGULATOR_MODE_STANDBY,
298 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
299 | REGULATOR_CHANGE_MODE
300 | REGULATOR_CHANGE_STATUS,
301 },
302};
303
304static struct regulator_init_data omap4_panda_vana = {
305 .constraints = {
306 .min_uV = 2100000,
307 .max_uV = 2100000,
308 .apply_uV = true,
309 .valid_modes_mask = REGULATOR_MODE_NORMAL
310 | REGULATOR_MODE_STANDBY,
311 .valid_ops_mask = REGULATOR_CHANGE_MODE
312 | REGULATOR_CHANGE_STATUS,
313 },
314};
315
316static struct regulator_init_data omap4_panda_vcxio = {
317 .constraints = {
318 .min_uV = 1800000,
319 .max_uV = 1800000,
320 .apply_uV = true,
321 .valid_modes_mask = REGULATOR_MODE_NORMAL
322 | REGULATOR_MODE_STANDBY,
323 .valid_ops_mask = REGULATOR_CHANGE_MODE
324 | REGULATOR_CHANGE_STATUS,
325 },
326};
327
328static struct regulator_init_data omap4_panda_vdac = {
329 .constraints = {
330 .min_uV = 1800000,
331 .max_uV = 1800000,
332 .apply_uV = true,
333 .valid_modes_mask = REGULATOR_MODE_NORMAL
334 | REGULATOR_MODE_STANDBY,
335 .valid_ops_mask = REGULATOR_CHANGE_MODE
336 | REGULATOR_CHANGE_STATUS,
337 },
338};
339
340static struct regulator_init_data omap4_panda_vusb = {
341 .constraints = {
342 .min_uV = 3300000,
343 .max_uV = 3300000,
344 .apply_uV = true,
345 .valid_modes_mask = REGULATOR_MODE_NORMAL
346 | REGULATOR_MODE_STANDBY,
347 .valid_ops_mask = REGULATOR_CHANGE_MODE
348 | REGULATOR_CHANGE_STATUS,
349 },
350};
351
352static struct twl4030_platform_data omap4_panda_twldata = {
353 .irq_base = TWL6030_IRQ_BASE,
354 .irq_end = TWL6030_IRQ_END,
355
356
357 .vmmc = &omap4_panda_vmmc,
358 .vpp = &omap4_panda_vpp,
359 .vusim = &omap4_panda_vusim,
360 .vana = &omap4_panda_vana,
361 .vcxio = &omap4_panda_vcxio,
362 .vdac = &omap4_panda_vdac,
363 .vusb = &omap4_panda_vusb,
364 .vaux1 = &omap4_panda_vaux1,
365 .vaux2 = &omap4_panda_vaux2,
366 .vaux3 = &omap4_panda_vaux3,
367 .usb = &omap4_usbphy_data,
368};
369
370static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
371 {
372 I2C_BOARD_INFO("twl6030", 0x48),
373 .flags = I2C_CLIENT_WAKE,
374 .irq = OMAP44XX_IRQ_SYS_1N,
375 .platform_data = &omap4_panda_twldata,
376 },
377};
378static int __init omap4_panda_i2c_init(void)
379{
380
381
382
383
384 omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
385 ARRAY_SIZE(omap4_panda_i2c_boardinfo));
386 omap_register_i2c_bus(2, 400, NULL, 0);
387 omap_register_i2c_bus(3, 400, NULL, 0);
388 omap_register_i2c_bus(4, 400, NULL, 0);
389 return 0;
390}
391
392#ifdef CONFIG_OMAP_MUX
393static struct omap_board_mux board_mux[] __initdata = {
394 { .reg_offset = OMAP_MUX_TERMINATOR },
395};
396#else
397#define board_mux NULL
398#endif
399
400static void __init omap4_panda_init(void)
401{
402 int package = OMAP_PACKAGE_CBS;
403
404 if (omap_rev() == OMAP4430_REV_ES1_0)
405 package = OMAP_PACKAGE_CBL;
406 omap4_mux_init(board_mux, package);
407
408 omap4_panda_i2c_init();
409 platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
410 omap_serial_init();
411 omap4_twl6030_hsmmc_init(mmc);
412 omap4_ehci_init();
413 usb_musb_init(&musb_board_data);
414}
415
416static void __init omap4_panda_map_io(void)
417{
418 omap2_set_globals_443x();
419 omap44xx_map_common_io();
420}
421
422MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
423
424 .boot_params = 0x80000100,
425 .reserve = omap_reserve,
426 .map_io = omap4_panda_map_io,
427 .init_irq = omap4_panda_init_irq,
428 .init_machine = omap4_panda_init,
429 .timer = &omap_timer,
430MACHINE_END
431