1
2
3
4
5
6
7
8
9
10
11#include <linux/io.h>
12#include <linux/i2c.h>
13#include <linux/gpio.h>
14#include <linux/init.h>
15#include <linux/i2c/twl.h>
16#include <linux/platform_device.h>
17#include <linux/regulator/fixed.h>
18#include <linux/regulator/machine.h>
19#include <linux/regulator/consumer.h>
20
21#include <asm/mach/arch.h>
22#include <asm/mach-types.h>
23
24#include <plat/i2c.h>
25#include <plat/mmc.h>
26#include <plat/usb.h>
27#include <plat/gpmc.h>
28#include <plat/common.h>
29#include <plat/onenand.h>
30
31#include "mux.h"
32#include "hsmmc.h"
33#include "sdram-nokia.h"
34
35static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
36 REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
37};
38
39
40static struct regulator_init_data rm680_vemmc = {
41 .constraints = {
42 .name = "rm680_vemmc",
43 .valid_modes_mask = REGULATOR_MODE_NORMAL
44 | REGULATOR_MODE_STANDBY,
45 .valid_ops_mask = REGULATOR_CHANGE_STATUS
46 | REGULATOR_CHANGE_MODE,
47 },
48 .num_consumer_supplies = ARRAY_SIZE(rm680_vemmc_consumers),
49 .consumer_supplies = rm680_vemmc_consumers,
50};
51
52static struct fixed_voltage_config rm680_vemmc_config = {
53 .supply_name = "VEMMC",
54 .microvolts = 2900000,
55 .gpio = 157,
56 .startup_delay = 150,
57 .enable_high = 1,
58 .init_data = &rm680_vemmc,
59};
60
61static struct platform_device rm680_vemmc_device = {
62 .name = "reg-fixed-voltage",
63 .dev = {
64 .platform_data = &rm680_vemmc_config,
65 },
66};
67
68static struct platform_device *rm680_peripherals_devices[] __initdata = {
69 &rm680_vemmc_device,
70};
71
72
73static struct twl4030_gpio_platform_data rm680_gpio_data = {
74 .gpio_base = OMAP_MAX_GPIO_LINES,
75 .irq_base = TWL4030_GPIO_IRQ_BASE,
76 .irq_end = TWL4030_GPIO_IRQ_END,
77 .pullups = BIT(0),
78 .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
79};
80
81static struct twl4030_usb_data rm680_usb_data = {
82 .usb_mode = T2_USB_MODE_ULPI,
83};
84
85static struct twl4030_platform_data rm680_twl_data = {
86 .irq_base = TWL4030_IRQ_BASE,
87 .irq_end = TWL4030_IRQ_END,
88 .gpio = &rm680_gpio_data,
89 .usb = &rm680_usb_data,
90
91};
92
93static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = {
94 {
95 I2C_BOARD_INFO("twl5031", 0x48),
96 .flags = I2C_CLIENT_WAKE,
97 .irq = INT_34XX_SYS_NIRQ,
98 .platform_data = &rm680_twl_data,
99 },
100};
101
102static void __init rm680_i2c_init(void)
103{
104 omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info,
105 ARRAY_SIZE(rm680_twl_i2c_board_info));
106 omap_register_i2c_bus(2, 400, NULL, 0);
107 omap_register_i2c_bus(3, 400, NULL, 0);
108}
109
110#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
111 defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
112static struct omap_onenand_platform_data board_onenand_data[] = {
113 {
114 .gpio_irq = 65,
115 .flags = ONENAND_SYNC_READWRITE,
116 }
117};
118#endif
119
120
121static struct omap2_hsmmc_info mmc[] __initdata = {
122 {
123 .name = "internal",
124 .mmc = 2,
125 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
126 .gpio_cd = -EINVAL,
127 .gpio_wp = -EINVAL,
128 },
129 { }
130};
131
132static void __init rm680_peripherals_init(void)
133{
134 platform_add_devices(rm680_peripherals_devices,
135 ARRAY_SIZE(rm680_peripherals_devices));
136 rm680_i2c_init();
137 gpmc_onenand_init(board_onenand_data);
138 omap2_hsmmc_init(mmc);
139}
140
141static void __init rm680_init_irq(void)
142{
143 struct omap_sdrc_params *sdrc_params;
144
145 omap2_init_common_infrastructure();
146 sdrc_params = nokia_get_sdram_timings();
147 omap2_init_common_devices(sdrc_params, sdrc_params);
148 omap_init_irq();
149}
150
151#ifdef CONFIG_OMAP_MUX
152static struct omap_board_mux board_mux[] __initdata = {
153 { .reg_offset = OMAP_MUX_TERMINATOR },
154};
155#endif
156
157static struct omap_musb_board_data rm680_musb_data = {
158 .interface_type = MUSB_INTERFACE_ULPI,
159 .mode = MUSB_PERIPHERAL,
160 .power = 100,
161};
162
163static void __init rm680_init(void)
164{
165 omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
166 omap_serial_init();
167 usb_musb_init(&rm680_musb_data);
168 rm680_peripherals_init();
169}
170
171static void __init rm680_map_io(void)
172{
173 omap2_set_globals_3xxx();
174 omap34xx_map_common_io();
175}
176
177MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
178 .boot_params = 0x80000100,
179 .map_io = rm680_map_io,
180 .reserve = omap_reserve,
181 .init_irq = rm680_init_irq,
182 .init_machine = rm680_init,
183 .timer = &omap_timer,
184MACHINE_END
185
