/*
 * Copyright 2004-2009 Analog Devices Inc.
 *           2008-2009 Bluetechnix
 *                2005 National ICT Australia (NICTA)
 *                      Aidan Williams <aidan@nicta.com.au>
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/musb.h>
#include <asm/bfin5xx_spi.h>
#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/nand.h>
#include <asm/portmux.h>
#include <asm/bfin_sdh.h>
#include <mach/bf54x_keys.h>
#include <asm/dpmc.h>
#include <linux/input.h>
#include <linux/spi/ad7877.h>

/*
 * Name the Board for the /proc/cpuinfo
 */
const char bfin_board_name[] = "Bluetechnix CM-BF548";

/*
 *  Driver needs to know address, irq and flag pin.
 */

#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)

#include <mach/bf54x-lq043.h>

static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
        .width =        480,
        .height =       272,
        .xres =         {480, 480, 480},
        .yres =         {272, 272, 272},
        .bpp =          {24, 24, 24},
        .disp =         GPIO_PE3,
};

static struct resource bf54x_lq043_resources[] = {
        {
                .start = IRQ_EPPI0_ERR,
                .end = IRQ_EPPI0_ERR,
                .flags = IORESOURCE_IRQ,
        },
};

static struct platform_device bf54x_lq043_device = {
        .name           = "bf54x-lq043",
        .id             = -1,
        .num_resources  = ARRAY_SIZE(bf54x_lq043_resources),
        .resource       = bf54x_lq043_resources,
        .dev            = {
                .platform_data = &bf54x_lq043_data,
        },
};
#endif

#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
static unsigned int bf548_keymap[] = {
        KEYVAL(0, 0, KEY_ENTER),
        KEYVAL(0, 1, KEY_HELP),
        KEYVAL(0, 2, KEY_0),
        KEYVAL(0, 3, KEY_BACKSPACE),
        KEYVAL(1, 0, KEY_TAB),
        KEYVAL(1, 1, KEY_9),
        KEYVAL(1, 2, KEY_8),
        KEYVAL(1, 3, KEY_7),
        KEYVAL(2, 0, KEY_DOWN),
        KEYVAL(2, 1, KEY_6),
        KEYVAL(2, 2, KEY_5),
        KEYVAL(2, 3, KEY_4),
        KEYVAL(3, 0, KEY_UP),
        KEYVAL(3, 1, KEY_3),
        KEYVAL(3, 2, KEY_2),
        KEYVAL(3, 3, KEY_1),
};

static struct bfin_kpad_platform_data bf54x_kpad_data = {
        .rows                   = 4,
        .cols                   = 4,
        .keymap                 = bf548_keymap,
        .keymapsize             = ARRAY_SIZE(bf548_keymap),
        .repeat                 = 0,
        .debounce_time          = 5000, /* ns (5ms) */
        .coldrive_time          = 1000, /* ns (1ms) */
        .keyup_test_interval    = 50, /* ms (50ms) */
};

static struct resource bf54x_kpad_resources[] = {
        {
                .start = IRQ_KEY,
                .end = IRQ_KEY,
                .flags = IORESOURCE_IRQ,
        },
};

static struct platform_device bf54x_kpad_device = {
        .name           = "bf54x-keys",
        .id             = -1,
        .num_resources  = ARRAY_SIZE(bf54x_kpad_resources),
        .resource       = bf54x_kpad_resources,
        .dev            = {
                .platform_data = &bf54x_kpad_data,
        },
};
#endif

#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
        .name = "rtc-bfin",
        .id   = -1,
};
#endif

#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
        {
                .start = UART0_DLL,
                .end = UART0_RBR+2,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_UART0_RX,
                .end = IRQ_UART0_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_UART0_ERROR,
                .end = IRQ_UART0_ERROR,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = CH_UART0_TX,
                .end = CH_UART0_TX,
                .flags = IORESOURCE_DMA,
        },
        {
                .start = CH_UART0_RX,
                .end = CH_UART0_RX,
                .flags = IORESOURCE_DMA,
        },
};

static unsigned short bfin_uart0_peripherals[] = {
        P_UART0_TX, P_UART0_RX, 0
};

static struct platform_device bfin_uart0_device = {
        .name = "bfin-uart",
        .id = 0,
        .num_resources = ARRAY_SIZE(bfin_uart0_resources),
        .resource = bfin_uart0_resources,
        .dev = {
                .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
        },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
        {
                .start = UART1_DLL,
                .end = UART1_RBR+2,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_UART1_RX,
                .end = IRQ_UART1_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_UART1_ERROR,
                .end = IRQ_UART1_ERROR,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = CH_UART1_TX,
                .end = CH_UART1_TX,
                .flags = IORESOURCE_DMA,
        },
        {
                .start = CH_UART1_RX,
                .end = CH_UART1_RX,
                .flags = IORESOURCE_DMA,
        },
#ifdef CONFIG_BFIN_UART1_CTSRTS
        {       /* CTS pin -- 0 means not supported */
                .start = GPIO_PE10,
                .end = GPIO_PE10,
                .flags = IORESOURCE_IO,
        },
        {       /* RTS pin -- 0 means not supported */
                .start = GPIO_PE9,
                .end = GPIO_PE9,
                .flags = IORESOURCE_IO,
        },
#endif
};

static unsigned short bfin_uart1_peripherals[] = {
        P_UART1_TX, P_UART1_RX,
#ifdef CONFIG_BFIN_UART1_CTSRTS
        P_UART1_RTS, P_UART1_CTS,
#endif
        0
};

static struct platform_device bfin_uart1_device = {
        .name = "bfin-uart",
        .id = 1,
        .num_resources = ARRAY_SIZE(bfin_uart1_resources),
        .resource = bfin_uart1_resources,
        .dev = {
                .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
        },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
static struct resource bfin_uart2_resources[] = {
        {
                .start = UART2_DLL,
                .end = UART2_RBR+2,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_UART2_RX,
                .end = IRQ_UART2_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_UART2_ERROR,
                .end = IRQ_UART2_ERROR,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = CH_UART2_TX,
                .end = CH_UART2_TX,
                .flags = IORESOURCE_DMA,
        },
        {
                .start = CH_UART2_RX,
                .end = CH_UART2_RX,
                .flags = IORESOURCE_DMA,
        },
};

static unsigned short bfin_uart2_peripherals[] = {
        P_UART2_TX, P_UART2_RX, 0
};

static struct platform_device bfin_uart2_device = {
        .name = "bfin-uart",
        .id = 2,
        .num_resources = ARRAY_SIZE(bfin_uart2_resources),
        .resource = bfin_uart2_resources,
        .dev = {
                .platform_data = &bfin_uart2_peripherals, /* Passed to driver */
        },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
static struct resource bfin_uart3_resources[] = {
        {
                .start = UART3_DLL,
                .end = UART3_RBR+2,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_UART3_RX,
                .end = IRQ_UART3_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_UART3_ERROR,
                .end = IRQ_UART3_ERROR,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = CH_UART3_TX,
                .end = CH_UART3_TX,
                .flags = IORESOURCE_DMA,
        },
        {
                .start = CH_UART3_RX,
                .end = CH_UART3_RX,
                .flags = IORESOURCE_DMA,
        },
#ifdef CONFIG_BFIN_UART3_CTSRTS
        {       /* CTS pin -- 0 means not supported */
                .start = GPIO_PB3,
                .end = GPIO_PB3,
                .flags = IORESOURCE_IO,
        },
        {       /* RTS pin -- 0 means not supported */
                .start = GPIO_PB2,
                .end = GPIO_PB2,
                .flags = IORESOURCE_IO,
        },
#endif
};

static unsigned short bfin_uart3_peripherals[] = {
        P_UART3_TX, P_UART3_RX,
#ifdef CONFIG_BFIN_UART3_CTSRTS
        P_UART3_RTS, P_UART3_CTS,
#endif
        0
};

static struct platform_device bfin_uart3_device = {
        .name = "bfin-uart",
        .id = 3,
        .num_resources = ARRAY_SIZE(bfin_uart3_resources),
        .resource = bfin_uart3_resources,
        .dev = {
                .platform_data = &bfin_uart3_peripherals, /* Passed to driver */
        },
};
#endif
#endif

#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
        {
                .start = 0xFFC00400,
                .end = 0xFFC004FF,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_UART0_RX,
                .end = IRQ_UART0_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = CH_UART0_RX,
                .end = CH_UART0_RX+1,
                .flags = IORESOURCE_DMA,
        },
};
static struct platform_device bfin_sir0_device = {
        .name = "bfin_sir",
        .id = 0,
        .num_resources = ARRAY_SIZE(bfin_sir0_resources),
        .resource = bfin_sir0_resources,
};
#endif
#ifdef CONFIG_BFIN_SIR1
static struct resource bfin_sir1_resources[] = {
        {
                .start = 0xFFC02000,
                .end = 0xFFC020FF,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_UART1_RX,
                .end = IRQ_UART1_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = CH_UART1_RX,
                .end = CH_UART1_RX+1,
                .flags = IORESOURCE_DMA,
        },
};
static struct platform_device bfin_sir1_device = {
        .name = "bfin_sir",
        .id = 1,
        .num_resources = ARRAY_SIZE(bfin_sir1_resources),
        .resource = bfin_sir1_resources,
};
#endif
#ifdef CONFIG_BFIN_SIR2
static struct resource bfin_sir2_resources[] = {
        {
                .start = 0xFFC02100,
                .end = 0xFFC021FF,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_UART2_RX,
                .end = IRQ_UART2_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = CH_UART2_RX,
                .end = CH_UART2_RX+1,
                .flags = IORESOURCE_DMA,
        },
};
static struct platform_device bfin_sir2_device = {
        .name = "bfin_sir",
        .id = 2,
        .num_resources = ARRAY_SIZE(bfin_sir2_resources),
        .resource = bfin_sir2_resources,
};
#endif
#ifdef CONFIG_BFIN_SIR3
static struct resource bfin_sir3_resources[] = {
        {
                .start = 0xFFC03100,
                .end = 0xFFC031FF,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_UART3_RX,
                .end = IRQ_UART3_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = CH_UART3_RX,
                .end = CH_UART3_RX+1,
                .flags = IORESOURCE_DMA,
        },
};
static struct platform_device bfin_sir3_device = {
        .name = "bfin_sir",
        .id = 3,
        .num_resources = ARRAY_SIZE(bfin_sir3_resources),
        .resource = bfin_sir3_resources,
};
#endif
#endif

#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>

static struct resource smsc911x_resources[] = {
        {
                .name = "smsc911x-memory",
                .start = 0x24000000,
                .end = 0x24000000 + 0xFF,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_PE6,
                .end = IRQ_PE6,
                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
        },
};

static struct smsc911x_platform_config smsc911x_config = {
        .flags = SMSC911X_USE_16BIT,
        .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
        .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
        .phy_interface = PHY_INTERFACE_MODE_MII,
};

static struct platform_device smsc911x_device = {
        .name = "smsc911x",
        .id = 0,
        .num_resources = ARRAY_SIZE(smsc911x_resources),
        .resource = smsc911x_resources,
        .dev = {
                .platform_data = &smsc911x_config,
        },
};
#endif

#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct resource musb_resources[] = {
        [0] = {
                .start  = 0xFFC03C00,
                .end    = 0xFFC040FF,
                .flags  = IORESOURCE_MEM,
        },
        [1] = { /* general IRQ */
                .start  = IRQ_USB_INT0,
                .end    = IRQ_USB_INT0,
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
                .name   = "mc"
        },
        [2] = { /* DMA IRQ */
                .start  = IRQ_USB_DMA,
                .end    = IRQ_USB_DMA,
                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
                .name   = "dma"
        },
};

static struct musb_hdrc_config musb_config = {
        .multipoint     = 0,
        .dyn_fifo       = 0,
        .soft_con       = 1,
        .dma            = 1,
        .num_eps        = 8,
        .dma_channels   = 8,
        .gpio_vrsel     = GPIO_PH6,
        /* Some custom boards need to be active low, just set it to "0"
         * if it is the case.
         */
        .gpio_vrsel_active      = 1,
        .clkin          = 24,           /* musb CLKIN in MHZ */
};

static struct musb_hdrc_platform_data musb_plat = {
#if defined(CONFIG_USB_MUSB_OTG)
        .mode           = MUSB_OTG,
#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
        .mode           = MUSB_HOST,
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
        .mode           = MUSB_PERIPHERAL,
#endif
        .config         = &musb_config,
};

static u64 musb_dmamask = ~(u32)0;

static struct platform_device musb_device = {
        .name           = "musb-blackfin",
        .id             = 0,
        .dev = {
                .dma_mask               = &musb_dmamask,
                .coherent_dma_mask      = 0xffffffff,
                .platform_data          = &musb_plat,
        },
        .num_resources  = ARRAY_SIZE(musb_resources),
        .resource       = musb_resources,
};
#endif

#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
        {
                .start = SPORT0_TCR1,
                .end = SPORT0_MRCS3+4,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_SPORT0_RX,
                .end = IRQ_SPORT0_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_SPORT0_ERROR,
                .end = IRQ_SPORT0_ERROR,
                .flags = IORESOURCE_IRQ,
        },
};

static unsigned short bfin_sport0_peripherals[] = {
        P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
        P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
};

static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
        .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
        .resource = bfin_sport0_uart_resources,
        .dev = {
                .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
        },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
static struct resource bfin_sport1_uart_resources[] = {
        {
                .start = SPORT1_TCR1,
                .end = SPORT1_MRCS3+4,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_SPORT1_RX,
                .end = IRQ_SPORT1_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_SPORT1_ERROR,
                .end = IRQ_SPORT1_ERROR,
                .flags = IORESOURCE_IRQ,
        },
};

static unsigned short bfin_sport1_peripherals[] = {
        P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
        P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
};

static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
        .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
        .resource = bfin_sport1_uart_resources,
        .dev = {
                .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
        },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
static struct resource bfin_sport2_uart_resources[] = {
        {
                .start = SPORT2_TCR1,
                .end = SPORT2_MRCS3+4,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_SPORT2_RX,
                .end = IRQ_SPORT2_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_SPORT2_ERROR,
                .end = IRQ_SPORT2_ERROR,
                .flags = IORESOURCE_IRQ,
        },
};

static unsigned short bfin_sport2_peripherals[] = {
        P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
        P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
};

static struct platform_device bfin_sport2_uart_device = {
        .name = "bfin-sport-uart",
        .id = 2,
        .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
        .resource = bfin_sport2_uart_resources,
        .dev = {
                .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
        },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
static struct resource bfin_sport3_uart_resources[] = {
        {
                .start = SPORT3_TCR1,
                .end = SPORT3_MRCS3+4,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_SPORT3_RX,
                .end = IRQ_SPORT3_RX+1,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_SPORT3_ERROR,
                .end = IRQ_SPORT3_ERROR,
                .flags = IORESOURCE_IRQ,
        },
};

static unsigned short bfin_sport3_peripherals[] = {
        P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
        P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
};

static struct platform_device bfin_sport3_uart_device = {
        .name = "bfin-sport-uart",
        .id = 3,
        .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
        .resource = bfin_sport3_uart_resources,
        .dev = {
                .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
        },
};
#endif
#endif

#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
static struct resource bfin_atapi_resources[] = {
        {
                .start = 0xFFC03800,
                .end = 0xFFC0386F,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_ATAPI_ERR,
                .end = IRQ_ATAPI_ERR,
                .flags = IORESOURCE_IRQ,
        },
};

static struct platform_device bfin_atapi_device = {
        .name = "pata-bf54x",
        .id = -1,
        .num_resources = ARRAY_SIZE(bfin_atapi_resources),
        .resource = bfin_atapi_resources,
};
#endif

#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
        {
                .name = "linux kernel(nand)",
                .offset = 0,
                .size = 4 * 1024 * 1024,
        },
        {
                .name = "file system(nand)",
                .offset = 4 * 1024 * 1024,
                .size = (256 - 4) * 1024 * 1024,
        },
};

static struct bf5xx_nand_platform bf5xx_nand_platform = {
        .data_width = NFC_NWIDTH_8,
        .partitions = partition_info,
        .nr_partitions = ARRAY_SIZE(partition_info),
        .rd_dly = 3,
        .wr_dly = 3,
};

static struct resource bf5xx_nand_resources[] = {
        {
                .start = 0xFFC03B00,
                .end = 0xFFC03B4F,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = CH_NFC,
                .end = CH_NFC,
                .flags = IORESOURCE_IRQ,
        },
};

static struct platform_device bf5xx_nand_device = {
        .name = "bf5xx-nand",
        .id = 0,
        .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
        .resource = bf5xx_nand_resources,
        .dev = {
                .platform_data = &bf5xx_nand_platform,
        },
};
#endif

#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
static struct bfin_sd_host bfin_sdh_data = {
        .dma_chan = CH_SDH,
        .irq_int0 = IRQ_SDH_MASK0,
        .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
};

static struct platform_device bf54x_sdh_device = {
        .name = "bfin-sdh",
        .id = 0,
        .dev = {
                .platform_data = &bfin_sdh_data,
        },
};
#endif

#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
static unsigned short bfin_can_peripherals[] = {
        P_CAN0_RX, P_CAN0_TX, 0
};

static struct resource bfin_can_resources[] = {
        {
                .start = 0xFFC02A00,
                .end = 0xFFC02FFF,
                .flags = IORESOURCE_MEM,
        },
        {
                .start = IRQ_CAN0_RX,
                .end = IRQ_CAN0_RX,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_CAN0_TX,
                .end = IRQ_CAN0_TX,
                .flags = IORESOURCE_IRQ,
        },
        {
                .start = IRQ_CAN0_ERROR,
                .end = IRQ_CAN0_ERROR,
                .flags = IORESOURCE_IRQ,
        },
};

static struct platform_device bfin_can_device = {
        .name = "bfin_can",
        .num_resources = ARRAY_SIZE(bfin_can_resources),
        .resource = bfin_can_resources,
        .dev = {
                .platform_data = &bfin_can_peripherals, /* Passed to driver */
        },
};
#endif

#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition para_partitions[] = {
        {
                .name       = "bootloader(nor)",
                .size       = 0x40000,
                .offset     = 0,
        }, {
                .name       = "linux kernel(nor)",
                .size       = 0x100000,
                .offset     = MTDPART_OFS_APPEND,
        }, {
                .name       = "file system(nor)",
                .size       = MTDPART_SIZ_FULL,
                .offset     = MTDPART_OFS_APPEND,
        }
};

static struct physmap_flash_data para_flash_data = {
        .width      = 2,
        .parts      = para_partitions,
        .nr_parts   = ARRAY_SIZE(para_partitions),
};

static struct resource para_flash_resource = {
        .start = 0x20000000,
        .end   = 0x207fffff,
        .flags = IORESOURCE_MEM,
};

static struct platform_device para_flash_device = {
        .name          = "physmap-flash",
        .id            = 0,
        .dev = {
                .platform_data = &para_flash_data,
        },
        .num_resources = 1,
        .resource      = &para_flash_resource,
};
#endif

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
        {
                .name = "bootloader(spi)",
                .size = 0x00040000,
                .offset = 0,
                .mask_flags = MTD_CAP_ROM
        }, {
                .name = "linux kernel(spi)",
                .size = 0x1c0000,
                .offset = 0x40000
        }
};

static struct flash_platform_data bfin_spi_flash_data = {
        .name = "m25p80",
        .parts = bfin_spi_flash_partitions,
        .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
        .type = "m25p16",
};

static struct bfin5xx_spi_chip spi_flash_chip_info = {
        .enable_dma = 0,         /* use dma transfer with this chip*/
        .bits_per_word = 8,
};
#endif

#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
        .enable_dma = 0,
        .bits_per_word = 16,
};

static const struct ad7877_platform_data bfin_ad7877_ts_info = {
        .model                  = 7877,
        .vref_delay_usecs       = 50,   /* internal, no capacitor */
        .x_plate_ohms           = 419,
        .y_plate_ohms           = 486,
        .pressure_max           = 1000,
        .pressure_min           = 0,
        .stopacq_polarity       = 1,
        .first_conversion_delay = 3,
        .acquisition_time       = 1,
        .averaging              = 1,
        .pen_down_acc_interval  = 1,
};
#endif

#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
static struct bfin5xx_spi_chip spidev_chip_info = {
        .enable_dma = 0,
        .bits_per_word = 8,
};
#endif

static struct spi_board_info bf54x_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
        {
                /* the modalias must be the same as spi device driver name */
                .modalias = "m25p80", /* Name of spi_driver for this device */
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0, /* Framework bus number */
                .chip_select = 1, /* SPI_SSEL1*/
                .platform_data = &bfin_spi_flash_data,
                .controller_data = &spi_flash_chip_info,
                .mode = SPI_MODE_3,
        },
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{
        .modalias               = "ad7877",
        .platform_data          = &bfin_ad7877_ts_info,
        .irq                    = IRQ_PJ11,
        .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
        .bus_num                = 0,
        .chip_select            = 2,
        .controller_data = &spi_ad7877_chip_info,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
        {
                .modalias = "spidev",
                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
                .chip_select = 1,
                .controller_data = &spidev_chip_info,
        },
#endif
};

/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
        [0] = {
                .start = SPI0_REGBASE,
                .end   = SPI0_REGBASE + 0xFF,
                .flags = IORESOURCE_MEM,
        },
        [1] = {
                .start = CH_SPI0,
                .end   = CH_SPI0,
                .flags = IORESOURCE_DMA,
        },
        [2] = {
                .start = IRQ_SPI0,
                .end   = IRQ_SPI0,
                .flags = IORESOURCE_IRQ,
        }
};

/* SPI (1) */
static struct resource bfin_spi1_resource[] = {
        [0] = {
                .start = SPI1_REGBASE,
                .end   = SPI1_REGBASE + 0xFF,
                .flags = IORESOURCE_MEM,
        },
        [1] = {
                .start = CH_SPI1,
                .end   = CH_SPI1,
                .flags = IORESOURCE_DMA,
        },
        [2] = {
                .start = IRQ_SPI1,
                .end   = IRQ_SPI1,
                .flags = IORESOURCE_IRQ,
        }
};

/* SPI controller data */
static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
        .num_chipselect = 4,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
        .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};

static struct platform_device bf54x_spi_master0 = {
        .name = "bfin-spi",
        .id = 0, /* Bus number */
        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
        .resource = bfin_spi0_resource,
        .dev = {
                .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
                },
};

static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
        .num_chipselect = 4,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
        .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
};

static struct platform_device bf54x_spi_master1 = {
        .name = "bfin-spi",
        .id = 1, /* Bus number */
        .num_resources = ARRAY_SIZE(bfin_spi1_resource),
        .resource = bfin_spi1_resource,
        .dev = {
                .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
                },

};
#endif  /* spi master and devices */

#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static struct resource bfin_twi0_resource[] = {
        [0] = {
                .start = TWI0_REGBASE,
                .end   = TWI0_REGBASE + 0xFF,
                .flags = IORESOURCE_MEM,
        },
        [1] = {
                .start = IRQ_TWI0,
                .end   = IRQ_TWI0,
                .flags = IORESOURCE_IRQ,
        },
};

static struct platform_device i2c_bfin_twi0_device = {
        .name = "i2c-bfin-twi",
        .id = 0,
        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
        .resource = bfin_twi0_resource,
};

#if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
static struct resource bfin_twi1_resource[] = {
        [0] = {
                .start = TWI1_REGBASE,
                .end   = TWI1_REGBASE + 0xFF,
                .flags = IORESOURCE_MEM,
        },
        [1] = {
                .start = IRQ_TWI1,
                .end   = IRQ_TWI1,
                .flags = IORESOURCE_IRQ,
        },
};

static struct platform_device i2c_bfin_twi1_device = {
        .name = "i2c-bfin-twi",
        .id = 1,
        .num_resources = ARRAY_SIZE(bfin_twi1_resource),
        .resource = bfin_twi1_resource,
};
#endif
#endif

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/gpio_keys.h>

static struct gpio_keys_button bfin_gpio_keys_table[] = {
        {BTN_0, GPIO_PH7, 1, "gpio-keys: BTN0"},
};

static struct gpio_keys_platform_data bfin_gpio_keys_data = {
        .buttons        = bfin_gpio_keys_table,
        .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
};

static struct platform_device bfin_device_gpiokeys = {
        .name      = "gpio-keys",
        .dev = {
                .platform_data = &bfin_gpio_keys_data,
        },
};
#endif

static const unsigned int cclk_vlev_datasheet[] =
{
/*
 * Internal VLEV BF54XSBBC1533
 ****temporarily using these values until data sheet is updated
 */
        VRPAIR(VLEV_085, 150000000),
        VRPAIR(VLEV_090, 250000000),
        VRPAIR(VLEV_110, 276000000),
        VRPAIR(VLEV_115, 301000000),
        VRPAIR(VLEV_120, 525000000),
        VRPAIR(VLEV_125, 550000000),
        VRPAIR(VLEV_130, 600000000),
};

static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
        .tuple_tab = cclk_vlev_datasheet,
        .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
        .vr_settling_time = 25 /* us */,
};

static struct platform_device bfin_dpmc = {
        .name = "bfin dpmc",
        .dev = {
                .platform_data = &bfin_dmpc_vreg_data,
        },
};

static struct platform_device *cm_bf548_devices[] __initdata = {

        &bfin_dpmc,

#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
        &rtc_device,
#endif

#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
        &bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
        &bfin_uart1_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
        &bfin_uart2_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
        &bfin_uart3_device,
#endif
#endif

#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
        &bfin_sir0_device,
#endif
#ifdef CONFIG_BFIN_SIR1
        &bfin_sir1_device,
#endif
#ifdef CONFIG_BFIN_SIR2
        &bfin_sir2_device,
#endif
#ifdef CONFIG_BFIN_SIR3
        &bfin_sir3_device,
#endif
#endif

#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
        &bf54x_lq043_device,
#endif

#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
        &smsc911x_device,
#endif

#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
        &musb_device,
#endif

#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
        &bfin_sport2_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
        &bfin_sport3_uart_device,
#endif
#endif

#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
        &bfin_atapi_device,
#endif

#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
        &bf5xx_nand_device,
#endif

#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
        &bf54x_sdh_device,
#endif

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
        &bf54x_spi_master0,
        &bf54x_spi_master1,
#endif

#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
        &bf54x_kpad_device,
#endif

#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
        &i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
        &i2c_bfin_twi1_device,
#endif
#endif

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,
#endif

#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
        &para_flash_device,
#endif

#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
        &bfin_can_device,
#endif

};

static int __init cm_bf548_init(void)
{
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
        platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
        spi_register_board_info(bf54x_spi_board_info,
                        ARRAY_SIZE(bf54x_spi_board_info));
#endif

        return 0;
}

arch_initcall(cm_bf548_init);

static struct platform_device *cm_bf548_early_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
#ifdef CONFIG_SERIAL_BFIN_UART0
        &bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
        &bfin_uart1_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART2
        &bfin_uart2_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART3
        &bfin_uart3_device,
#endif
#endif

#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
        &bfin_sport2_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
        &bfin_sport3_uart_device,
#endif
#endif
};

void __init native_machine_early_platform_add_devices(void)
{
        printk(KERN_INFO "register early platform devices\n");
        early_platform_add_devices(cm_bf548_early_devices,
                ARRAY_SIZE(cm_bf548_early_devices));
}