/*
 * General Purpose functions for the global management of the
 * Communication Processor Module.
 * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
 *
 * In addition to the individual control of the communication
 * channels, there are a few functions that globally affect the
 * communication processor.
 *
 * Buffer descriptors must be allocated from the dual ported memory
 * space.  The allocator for that is here.  When the communication
 * process is reset, we reclaim the memory available.  There is
 * currently no deallocator for this memory.
 * The amount of space available is platform dependent.  On the
 * MBX, the EPPC software loads additional microcode into the
 * communication processor, and uses some of the DP ram for this
 * purpose.  Current, the first 512 bytes and the last 256 bytes of
 * memory are used.  Right now I am conservative and only use the
 * memory that can never be used for microcode.  If there are
 * applications that require more DP ram, we can expand the boundaries
 * but then we have to be careful of any downloaded microcode.
 */
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
#include <asm/cpm1.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <asm/rheap.h>
#include <asm/prom.h>
#include <asm/cpm.h>

#include <asm/fs_pd.h>

#ifdef CONFIG_8xx_GPIO
#include <linux/of_gpio.h>
#endif

#define CPM_MAP_SIZE    (0x4000)

cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
immap_t __iomem *mpc8xx_immr;
static cpic8xx_t __iomem *cpic_reg;

static struct irq_host *cpm_pic_host;

static void cpm_mask_irq(unsigned int irq)
{
        unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq;

        clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
}

static void cpm_unmask_irq(unsigned int irq)
{
        unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq;

        setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
}

static void cpm_end_irq(unsigned int irq)
{
        unsigned int cpm_vec = (unsigned int)irq_map[irq].hwirq;

        out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
}

static struct irq_chip cpm_pic = {
        .name = "CPM PIC",
        .mask = cpm_mask_irq,
        .unmask = cpm_unmask_irq,
        .eoi = cpm_end_irq,
};

int cpm_get_irq(void)
{
        int cpm_vec;

        /* Get the vector by setting the ACK bit and then reading
         * the register.
         */
        out_be16(&cpic_reg->cpic_civr, 1);
        cpm_vec = in_be16(&cpic_reg->cpic_civr);
        cpm_vec >>= 11;

        return irq_linear_revmap(cpm_pic_host, cpm_vec);
}

static int cpm_pic_host_map(struct irq_host *h, unsigned int virq,
                          irq_hw_number_t hw)
{
        pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);

        irq_to_desc(virq)->status |= IRQ_LEVEL;
        set_irq_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
        return 0;
}

/* The CPM can generate the error interrupt when there is a race condition
 * between generating and masking interrupts.  All we have to do is ACK it
 * and return.  This is a no-op function so we don't need any special
 * tests in the interrupt handler.
 */
static irqreturn_t cpm_error_interrupt(int irq, void *dev)
{
        return IRQ_HANDLED;
}

static struct irqaction cpm_error_irqaction = {
        .handler = cpm_error_interrupt,
        .name = "error",
};

static struct irq_host_ops cpm_pic_host_ops = {
        .map = cpm_pic_host_map,
};

unsigned int cpm_pic_init(void)
{
        struct device_node *np = NULL;
        struct resource res;
        unsigned int sirq = NO_IRQ, hwirq, eirq;
        int ret;

        pr_debug("cpm_pic_init\n");

        np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic");
        if (np == NULL)
                np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
        if (np == NULL) {
                printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n");
                return sirq;
        }

        ret = of_address_to_resource(np, 0, &res);
        if (ret)
                goto end;

        cpic_reg = ioremap(res.start, res.end - res.start + 1);
        if (cpic_reg == NULL)
                goto end;

        sirq = irq_of_parse_and_map(np, 0);
        if (sirq == NO_IRQ)
                goto end;

        /* Initialize the CPM interrupt controller. */
        hwirq = (unsigned int)irq_map[sirq].hwirq;
        out_be32(&cpic_reg->cpic_cicr,
            (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
                ((hwirq/2) << 13) | CICR_HP_MASK);

        out_be32(&cpic_reg->cpic_cimr, 0);

        cpm_pic_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
                                      64, &cpm_pic_host_ops, 64);
        if (cpm_pic_host == NULL) {
                printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
                sirq = NO_IRQ;
                goto end;
        }

        /* Install our own error handler. */
        np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
        if (np == NULL)
                np = of_find_node_by_type(NULL, "cpm");
        if (np == NULL) {
                printk(KERN_ERR "CPM PIC init: can not find cpm node\n");
                goto end;
        }

        eirq = irq_of_parse_and_map(np, 0);
        if (eirq == NO_IRQ)
                goto end;

        if (setup_irq(eirq, &cpm_error_irqaction))
                printk(KERN_ERR "Could not allocate CPM error IRQ!");

        setbits32(&cpic_reg->cpic_cicr, CICR_IEN);

end:
        of_node_put(np);
        return sirq;
}

void __init cpm_reset(void)
{
        sysconf8xx_t __iomem *siu_conf;

        mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
        if (!mpc8xx_immr) {
                printk(KERN_CRIT "Could not map IMMR\n");
                return;
        }

        cpmp = &mpc8xx_immr->im_cpm;

#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
        /* Perform a reset.
        */
        out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);

        /* Wait for it.
        */
        while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
#endif

#ifdef CONFIG_UCODE_PATCH
        cpm_load_patch(cpmp);
#endif

        /* Set SDMA Bus Request priority 5.
         * On 860T, this also enables FEC priority 6.  I am not sure
         * this is what we realy want for some applications, but the
         * manual recommends it.
         * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
         */
        siu_conf = immr_map(im_siu_conf);
        out_be32(&siu_conf->sc_sdcr, 1);
        immr_unmap(siu_conf);

        cpm_muram_init();
}

static DEFINE_SPINLOCK(cmd_lock);

#define MAX_CR_CMD_LOOPS        10000

int cpm_command(u32 command, u8 opcode)
{
        int i, ret;
        unsigned long flags;

        if (command & 0xffffff0f)
                return -EINVAL;

        spin_lock_irqsave(&cmd_lock, flags);

        ret = 0;
        out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
        for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
                if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
                        goto out;

        printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
        ret = -EIO;
out:
        spin_unlock_irqrestore(&cmd_lock, flags);
        return ret;
}
EXPORT_SYMBOL(cpm_command);

/* Set a baud rate generator.  This needs lots of work.  There are
 * four BRGs, any of which can be wired to any channel.
 * The internal baud rate clock is the system clock divided by 16.
 * This assumes the baudrate is 16x oversampled by the uart.
 */
#define BRG_INT_CLK             (get_brgfreq())
#define BRG_UART_CLK            (BRG_INT_CLK/16)
#define BRG_UART_CLK_DIV16      (BRG_UART_CLK/16)

void
cpm_setbrg(uint brg, uint rate)
{
        u32 __iomem *bp;

        /* This is good enough to get SMCs running.....
        */
        bp = &cpmp->cp_brgc1;
        bp += brg;
        /* The BRG has a 12-bit counter.  For really slow baud rates (or
         * really fast processors), we may have to further divide by 16.
         */
        if (((BRG_UART_CLK / rate) - 1) < 4096)
                out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
        else
                out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
                              CPM_BRG_EN | CPM_BRG_DIV16);
}

struct cpm_ioport16 {
        __be16 dir, par, odr_sor, dat, intr;
        __be16 res[3];
};

struct cpm_ioport32b {
        __be32 dir, par, odr, dat;
};

struct cpm_ioport32e {
        __be32 dir, par, sor, odr, dat;
};

static void cpm1_set_pin32(int port, int pin, int flags)
{
        struct cpm_ioport32e __iomem *iop;
        pin = 1 << (31 - pin);

        if (port == CPM_PORTB)
                iop = (struct cpm_ioport32e __iomem *)
                      &mpc8xx_immr->im_cpm.cp_pbdir;
        else
                iop = (struct cpm_ioport32e __iomem *)
                      &mpc8xx_immr->im_cpm.cp_pedir;

        if (flags & CPM_PIN_OUTPUT)
                setbits32(&iop->dir, pin);
        else
                clrbits32(&iop->dir, pin);

        if (!(flags & CPM_PIN_GPIO))
                setbits32(&iop->par, pin);
        else
                clrbits32(&iop->par, pin);

        if (port == CPM_PORTB) {
                if (flags & CPM_PIN_OPENDRAIN)
                        setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
                else
                        clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
        }

        if (port == CPM_PORTE) {
                if (flags & CPM_PIN_SECONDARY)
                        setbits32(&iop->sor, pin);
                else
                        clrbits32(&iop->sor, pin);

                if (flags & CPM_PIN_OPENDRAIN)
                        setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
                else
                        clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
        }
}

static void cpm1_set_pin16(int port, int pin, int flags)
{
        struct cpm_ioport16 __iomem *iop =
                (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;

        pin = 1 << (15 - pin);

        if (port != 0)
                iop += port - 1;

        if (flags & CPM_PIN_OUTPUT)
                setbits16(&iop->dir, pin);
        else
                clrbits16(&iop->dir, pin);

        if (!(flags & CPM_PIN_GPIO))
                setbits16(&iop->par, pin);
        else
                clrbits16(&iop->par, pin);

        if (port == CPM_PORTA) {
                if (flags & CPM_PIN_OPENDRAIN)
                        setbits16(&iop->odr_sor, pin);
                else
                        clrbits16(&iop->odr_sor, pin);
        }
        if (port == CPM_PORTC) {
                if (flags & CPM_PIN_SECONDARY)
                        setbits16(&iop->odr_sor, pin);
                else
                        clrbits16(&iop->odr_sor, pin);
        }
}

void cpm1_set_pin(enum cpm_port port, int pin, int flags)
{
        if (port == CPM_PORTB || port == CPM_PORTE)
                cpm1_set_pin32(port, pin, flags);
        else
                cpm1_set_pin16(port, pin, flags);
}

int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
{
        int shift;
        int i, bits = 0;
        u32 __iomem *reg;
        u32 mask = 7;

        u8 clk_map[][3] = {
                {CPM_CLK_SCC1, CPM_BRG1, 0},
                {CPM_CLK_SCC1, CPM_BRG2, 1},
                {CPM_CLK_SCC1, CPM_BRG3, 2},
                {CPM_CLK_SCC1, CPM_BRG4, 3},
                {CPM_CLK_SCC1, CPM_CLK1, 4},
                {CPM_CLK_SCC1, CPM_CLK2, 5},
                {CPM_CLK_SCC1, CPM_CLK3, 6},
                {CPM_CLK_SCC1, CPM_CLK4, 7},

                {CPM_CLK_SCC2, CPM_BRG1, 0},
                {CPM_CLK_SCC2, CPM_BRG2, 1},
                {CPM_CLK_SCC2, CPM_BRG3, 2},
                {CPM_CLK_SCC2, CPM_BRG4, 3},
                {CPM_CLK_SCC2, CPM_CLK1, 4},
                {CPM_CLK_SCC2, CPM_CLK2, 5},
                {CPM_CLK_SCC2, CPM_CLK3, 6},
                {CPM_CLK_SCC2, CPM_CLK4, 7},

                {CPM_CLK_SCC3, CPM_BRG1, 0},
                {CPM_CLK_SCC3, CPM_BRG2, 1},
                {CPM_CLK_SCC3, CPM_BRG3, 2},
                {CPM_CLK_SCC3, CPM_BRG4, 3},
                {CPM_CLK_SCC3, CPM_CLK5, 4},
                {CPM_CLK_SCC3, CPM_CLK6, 5},
                {CPM_CLK_SCC3, CPM_CLK7, 6},
                {CPM_CLK_SCC3, CPM_CLK8, 7},

                {CPM_CLK_SCC4, CPM_BRG1, 0},
                {CPM_CLK_SCC4, CPM_BRG2, 1},
                {CPM_CLK_SCC4, CPM_BRG3, 2},
                {CPM_CLK_SCC4, CPM_BRG4, 3},
                {CPM_CLK_SCC4, CPM_CLK5, 4},
                {CPM_CLK_SCC4, CPM_CLK6, 5},
                {CPM_CLK_SCC4, CPM_CLK7, 6},
                {CPM_CLK_SCC4, CPM_CLK8, 7},

                {CPM_CLK_SMC1, CPM_BRG1, 0},
                {CPM_CLK_SMC1, CPM_BRG2, 1},
                {CPM_CLK_SMC1, CPM_BRG3, 2},
                {CPM_CLK_SMC1, CPM_BRG4, 3},
                {CPM_CLK_SMC1, CPM_CLK1, 4},
                {CPM_CLK_SMC1, CPM_CLK2, 5},
                {CPM_CLK_SMC1, CPM_CLK3, 6},
                {CPM_CLK_SMC1, CPM_CLK4, 7},

                {CPM_CLK_SMC2, CPM_BRG1, 0},
                {CPM_CLK_SMC2, CPM_BRG2, 1},
                {CPM_CLK_SMC2, CPM_BRG3, 2},
                {CPM_CLK_SMC2, CPM_BRG4, 3},
                {CPM_CLK_SMC2, CPM_CLK5, 4},
                {CPM_CLK_SMC2, CPM_CLK6, 5},
                {CPM_CLK_SMC2, CPM_CLK7, 6},
                {CPM_CLK_SMC2, CPM_CLK8, 7},
        };

        switch (target) {
        case CPM_CLK_SCC1:
                reg = &mpc8xx_immr->im_cpm.cp_sicr;
                shift = 0;
                break;

        case CPM_CLK_SCC2:
                reg = &mpc8xx_immr->im_cpm.cp_sicr;
                shift = 8;
                break;

        case CPM_CLK_SCC3:
                reg = &mpc8xx_immr->im_cpm.cp_sicr;
                shift = 16;
                break;

        case CPM_CLK_SCC4:
                reg = &mpc8xx_immr->im_cpm.cp_sicr;
                shift = 24;
                break;

        case CPM_CLK_SMC1:
                reg = &mpc8xx_immr->im_cpm.cp_simode;
                shift = 12;
                break;

        case CPM_CLK_SMC2:
                reg = &mpc8xx_immr->im_cpm.cp_simode;
                shift = 28;
                break;

        default:
                printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
                return -EINVAL;
        }

        for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
                if (clk_map[i][0] == target && clk_map[i][1] == clock) {
                        bits = clk_map[i][2];
                        break;
                }
        }

        if (i == ARRAY_SIZE(clk_map)) {
                printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
                return -EINVAL;
        }

        bits <<= shift;
        mask <<= shift;

        if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
                if (mode == CPM_CLK_RTX) {
                        bits |= bits << 3;
                        mask |= mask << 3;
                } else if (mode == CPM_CLK_RX) {
                        bits <<= 3;
                        mask <<= 3;
                }
        }

        out_be32(reg, (in_be32(reg) & ~mask) | bits);

        return 0;
}

/*
 * GPIO LIB API implementation
 */
#ifdef CONFIG_8xx_GPIO

struct cpm1_gpio16_chip {
        struct of_mm_gpio_chip mm_gc;
        spinlock_t lock;

        /* shadowed data register to clear/set bits safely */
        u16 cpdata;
};

static inline struct cpm1_gpio16_chip *
to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
{
        return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
}

static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
{
        struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
        struct cpm_ioport16 __iomem *iop = mm_gc->regs;

        cpm1_gc->cpdata = in_be16(&iop->dat);
}

static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
{
        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
        struct cpm_ioport16 __iomem *iop = mm_gc->regs;
        u16 pin_mask;

        pin_mask = 1 << (15 - gpio);

        return !!(in_be16(&iop->dat) & pin_mask);
}

static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
        int value)
{
        struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
        struct cpm_ioport16 __iomem *iop = mm_gc->regs;

        if (value)
                cpm1_gc->cpdata |= pin_mask;
        else
                cpm1_gc->cpdata &= ~pin_mask;

        out_be16(&iop->dat, cpm1_gc->cpdata);
}

static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
        struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
        unsigned long flags;
        u16 pin_mask = 1 << (15 - gpio);

        spin_lock_irqsave(&cpm1_gc->lock, flags);

        __cpm1_gpio16_set(mm_gc, pin_mask, value);

        spin_unlock_irqrestore(&cpm1_gc->lock, flags);
}

static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
        struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
        struct cpm_ioport16 __iomem *iop = mm_gc->regs;
        unsigned long flags;
        u16 pin_mask = 1 << (15 - gpio);

        spin_lock_irqsave(&cpm1_gc->lock, flags);

        setbits16(&iop->dir, pin_mask);
        __cpm1_gpio16_set(mm_gc, pin_mask, val);

        spin_unlock_irqrestore(&cpm1_gc->lock, flags);

        return 0;
}

static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
        struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
        struct cpm_ioport16 __iomem *iop = mm_gc->regs;
        unsigned long flags;
        u16 pin_mask = 1 << (15 - gpio);

        spin_lock_irqsave(&cpm1_gc->lock, flags);

        clrbits16(&iop->dir, pin_mask);

        spin_unlock_irqrestore(&cpm1_gc->lock, flags);

        return 0;
}

int cpm1_gpiochip_add16(struct device_node *np)
{
        struct cpm1_gpio16_chip *cpm1_gc;
        struct of_mm_gpio_chip *mm_gc;
        struct gpio_chip *gc;

        cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
        if (!cpm1_gc)
                return -ENOMEM;

        spin_lock_init(&cpm1_gc->lock);

        mm_gc = &cpm1_gc->mm_gc;
        gc = &mm_gc->gc;

        mm_gc->save_regs = cpm1_gpio16_save_regs;
        gc->ngpio = 16;
        gc->direction_input = cpm1_gpio16_dir_in;
        gc->direction_output = cpm1_gpio16_dir_out;
        gc->get = cpm1_gpio16_get;
        gc->set = cpm1_gpio16_set;

        return of_mm_gpiochip_add(np, mm_gc);
}

struct cpm1_gpio32_chip {
        struct of_mm_gpio_chip mm_gc;
        spinlock_t lock;

        /* shadowed data register to clear/set bits safely */
        u32 cpdata;
};

static inline struct cpm1_gpio32_chip *
to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
{
        return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
}

static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
{
        struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
        struct cpm_ioport32b __iomem *iop = mm_gc->regs;

        cpm1_gc->cpdata = in_be32(&iop->dat);
}

static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
{
        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
        struct cpm_ioport32b __iomem *iop = mm_gc->regs;
        u32 pin_mask;

        pin_mask = 1 << (31 - gpio);

        return !!(in_be32(&iop->dat) & pin_mask);
}

static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
        int value)
{
        struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
        struct cpm_ioport32b __iomem *iop = mm_gc->regs;

        if (value)
                cpm1_gc->cpdata |= pin_mask;
        else
                cpm1_gc->cpdata &= ~pin_mask;

        out_be32(&iop->dat, cpm1_gc->cpdata);
}

static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
{
        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
        struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
        unsigned long flags;
        u32 pin_mask = 1 << (31 - gpio);

        spin_lock_irqsave(&cpm1_gc->lock, flags);

        __cpm1_gpio32_set(mm_gc, pin_mask, value);

        spin_unlock_irqrestore(&cpm1_gc->lock, flags);
}

static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
        struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
        struct cpm_ioport32b __iomem *iop = mm_gc->regs;
        unsigned long flags;
        u32 pin_mask = 1 << (31 - gpio);

        spin_lock_irqsave(&cpm1_gc->lock, flags);

        setbits32(&iop->dir, pin_mask);
        __cpm1_gpio32_set(mm_gc, pin_mask, val);

        spin_unlock_irqrestore(&cpm1_gc->lock, flags);

        return 0;
}

static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
        struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
        struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
        struct cpm_ioport32b __iomem *iop = mm_gc->regs;
        unsigned long flags;
        u32 pin_mask = 1 << (31 - gpio);

        spin_lock_irqsave(&cpm1_gc->lock, flags);

        clrbits32(&iop->dir, pin_mask);

        spin_unlock_irqrestore(&cpm1_gc->lock, flags);

        return 0;
}

int cpm1_gpiochip_add32(struct device_node *np)
{
        struct cpm1_gpio32_chip *cpm1_gc;
        struct of_mm_gpio_chip *mm_gc;
        struct gpio_chip *gc;

        cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
        if (!cpm1_gc)
                return -ENOMEM;

        spin_lock_init(&cpm1_gc->lock);

        mm_gc = &cpm1_gc->mm_gc;
        gc = &mm_gc->gc;

        mm_gc->save_regs = cpm1_gpio32_save_regs;
        gc->ngpio = 32;
        gc->direction_input = cpm1_gpio32_dir_in;
        gc->direction_output = cpm1_gpio32_dir_out;
        gc->get = cpm1_gpio32_get;
        gc->set = cpm1_gpio32_set;

        return of_mm_gpiochip_add(np, mm_gc);
}

static int cpm_init_par_io(void)
{
        struct device_node *np;

        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
                cpm1_gpiochip_add16(np);

        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
                cpm1_gpiochip_add32(np);

        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
                cpm1_gpiochip_add16(np);

        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
                cpm1_gpiochip_add16(np);

        /* Port E uses CPM2 layout */
        for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
                cpm2_gpiochip_add32(np);
        return 0;
}
arch_initcall(cpm_init_par_io);

#endif /* CONFIG_8xx_GPIO */