linux/arch/sh/kernel/setup.c
<<
>>
Prefs
   1/*
   2 * arch/sh/kernel/setup.c
   3 *
   4 * This file handles the architecture-dependent parts of initialization
   5 *
   6 *  Copyright (C) 1999  Niibe Yutaka
   7 *  Copyright (C) 2002 - 2010 Paul Mundt
   8 */
   9#include <linux/screen_info.h>
  10#include <linux/ioport.h>
  11#include <linux/init.h>
  12#include <linux/initrd.h>
  13#include <linux/bootmem.h>
  14#include <linux/console.h>
  15#include <linux/root_dev.h>
  16#include <linux/utsname.h>
  17#include <linux/nodemask.h>
  18#include <linux/cpu.h>
  19#include <linux/pfn.h>
  20#include <linux/fs.h>
  21#include <linux/mm.h>
  22#include <linux/kexec.h>
  23#include <linux/module.h>
  24#include <linux/smp.h>
  25#include <linux/err.h>
  26#include <linux/crash_dump.h>
  27#include <linux/mmzone.h>
  28#include <linux/clk.h>
  29#include <linux/delay.h>
  30#include <linux/platform_device.h>
  31#include <linux/memblock.h>
  32#include <asm/uaccess.h>
  33#include <asm/io.h>
  34#include <asm/page.h>
  35#include <asm/elf.h>
  36#include <asm/sections.h>
  37#include <asm/irq.h>
  38#include <asm/setup.h>
  39#include <asm/clock.h>
  40#include <asm/smp.h>
  41#include <asm/mmu_context.h>
  42#include <asm/mmzone.h>
  43#include <asm/sparsemem.h>
  44
  45/*
  46 * Initialize loops_per_jiffy as 10000000 (1000MIPS).
  47 * This value will be used at the very early stage of serial setup.
  48 * The bigger value means no problem.
  49 */
  50struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = {
  51        [0] = {
  52                .type                   = CPU_SH_NONE,
  53                .family                 = CPU_FAMILY_UNKNOWN,
  54                .loops_per_jiffy        = 10000000,
  55                .phys_bits              = MAX_PHYSMEM_BITS,
  56        },
  57};
  58EXPORT_SYMBOL(cpu_data);
  59
  60/*
  61 * The machine vector. First entry in .machvec.init, or clobbered by
  62 * sh_mv= on the command line, prior to .machvec.init teardown.
  63 */
  64struct sh_machine_vector sh_mv = { .mv_name = "generic", };
  65EXPORT_SYMBOL(sh_mv);
  66
  67#ifdef CONFIG_VT
  68struct screen_info screen_info;
  69#endif
  70
  71extern int root_mountflags;
  72
  73#define RAMDISK_IMAGE_START_MASK        0x07FF
  74#define RAMDISK_PROMPT_FLAG             0x8000
  75#define RAMDISK_LOAD_FLAG               0x4000
  76
  77static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
  78
  79static struct resource code_resource = {
  80        .name = "Kernel code",
  81        .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
  82};
  83
  84static struct resource data_resource = {
  85        .name = "Kernel data",
  86        .flags = IORESOURCE_BUSY | IORESOURCE_MEM,
  87};
  88
  89static struct resource bss_resource = {
  90        .name   = "Kernel bss",
  91        .flags  = IORESOURCE_BUSY | IORESOURCE_MEM,
  92};
  93
  94unsigned long memory_start;
  95EXPORT_SYMBOL(memory_start);
  96unsigned long memory_end = 0;
  97EXPORT_SYMBOL(memory_end);
  98unsigned long memory_limit = 0;
  99
 100static struct resource mem_resources[MAX_NUMNODES];
 101
 102int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
 103
 104static int __init early_parse_mem(char *p)
 105{
 106        if (!p)
 107                return 1;
 108
 109        memory_limit = PAGE_ALIGN(memparse(p, &p));
 110
 111        pr_notice("Memory limited to %ldMB\n", memory_limit >> 20);
 112
 113        return 0;
 114}
 115early_param("mem", early_parse_mem);
 116
 117void __init check_for_initrd(void)
 118{
 119#ifdef CONFIG_BLK_DEV_INITRD
 120        unsigned long start, end;
 121
 122        /*
 123         * Check for the rare cases where boot loaders adhere to the boot
 124         * ABI.
 125         */
 126        if (!LOADER_TYPE || !INITRD_START || !INITRD_SIZE)
 127                goto disable;
 128
 129        start = INITRD_START + __MEMORY_START;
 130        end = start + INITRD_SIZE;
 131
 132        if (unlikely(end <= start))
 133                goto disable;
 134        if (unlikely(start & ~PAGE_MASK)) {
 135                pr_err("initrd must be page aligned\n");
 136                goto disable;
 137        }
 138
 139        if (unlikely(start < __MEMORY_START)) {
 140                pr_err("initrd start (%08lx) < __MEMORY_START(%x)\n",
 141                        start, __MEMORY_START);
 142                goto disable;
 143        }
 144
 145        if (unlikely(end > memblock_end_of_DRAM())) {
 146                pr_err("initrd extends beyond end of memory "
 147                       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
 148                       end, (unsigned long)memblock_end_of_DRAM());
 149                goto disable;
 150        }
 151
 152        /*
 153         * If we got this far inspite of the boot loader's best efforts
 154         * to the contrary, assume we actually have a valid initrd and
 155         * fix up the root dev.
 156         */
 157        ROOT_DEV = Root_RAM0;
 158
 159        /*
 160         * Address sanitization
 161         */
 162        initrd_start = (unsigned long)__va(start);
 163        initrd_end = initrd_start + INITRD_SIZE;
 164
 165        memblock_reserve(__pa(initrd_start), INITRD_SIZE);
 166
 167        return;
 168
 169disable:
 170        pr_info("initrd disabled\n");
 171        initrd_start = initrd_end = 0;
 172#endif
 173}
 174
 175void __cpuinit calibrate_delay(void)
 176{
 177        struct clk *clk = clk_get(NULL, "cpu_clk");
 178
 179        if (IS_ERR(clk))
 180                panic("Need a sane CPU clock definition!");
 181
 182        loops_per_jiffy = (clk_get_rate(clk) >> 1) / HZ;
 183
 184        printk(KERN_INFO "Calibrating delay loop (skipped)... "
 185                         "%lu.%02lu BogoMIPS PRESET (lpj=%lu)\n",
 186                         loops_per_jiffy/(500000/HZ),
 187                         (loops_per_jiffy/(5000/HZ)) % 100,
 188                         loops_per_jiffy);
 189}
 190
 191void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 192                                                unsigned long end_pfn)
 193{
 194        struct resource *res = &mem_resources[nid];
 195        unsigned long start, end;
 196
 197        WARN_ON(res->name); /* max one active range per node for now */
 198
 199        start = start_pfn << PAGE_SHIFT;
 200        end = end_pfn << PAGE_SHIFT;
 201
 202        res->name = "System RAM";
 203        res->start = start;
 204        res->end = end - 1;
 205        res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 206
 207        if (request_resource(&iomem_resource, res)) {
 208                pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
 209                       start_pfn, end_pfn);
 210                return;
 211        }
 212
 213        /*
 214         *  We don't know which RAM region contains kernel data,
 215         *  so we try it repeatedly and let the resource manager
 216         *  test it.
 217         */
 218        request_resource(res, &code_resource);
 219        request_resource(res, &data_resource);
 220        request_resource(res, &bss_resource);
 221
 222        /*
 223         * Also make sure that there is a PMB mapping that covers this
 224         * range before we attempt to activate it, to avoid reset by MMU.
 225         * We can hit this path with NUMA or memory hot-add.
 226         */
 227        pmb_bolt_mapping((unsigned long)__va(start), start, end - start,
 228                         PAGE_KERNEL);
 229
 230        add_active_range(nid, start_pfn, end_pfn);
 231}
 232
 233void __init __weak plat_early_device_setup(void)
 234{
 235}
 236
 237void __init setup_arch(char **cmdline_p)
 238{
 239        enable_mmu();
 240
 241        ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
 242
 243        printk(KERN_NOTICE "Boot params:\n"
 244                           "... MOUNT_ROOT_RDONLY - %08lx\n"
 245                           "... RAMDISK_FLAGS     - %08lx\n"
 246                           "... ORIG_ROOT_DEV     - %08lx\n"
 247                           "... LOADER_TYPE       - %08lx\n"
 248                           "... INITRD_START      - %08lx\n"
 249                           "... INITRD_SIZE       - %08lx\n",
 250                           MOUNT_ROOT_RDONLY, RAMDISK_FLAGS,
 251                           ORIG_ROOT_DEV, LOADER_TYPE,
 252                           INITRD_START, INITRD_SIZE);
 253
 254#ifdef CONFIG_BLK_DEV_RAM
 255        rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
 256        rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
 257        rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
 258#endif
 259
 260        if (!MOUNT_ROOT_RDONLY)
 261                root_mountflags &= ~MS_RDONLY;
 262        init_mm.start_code = (unsigned long) _text;
 263        init_mm.end_code = (unsigned long) _etext;
 264        init_mm.end_data = (unsigned long) _edata;
 265        init_mm.brk = (unsigned long) _end;
 266
 267        code_resource.start = virt_to_phys(_text);
 268        code_resource.end = virt_to_phys(_etext)-1;
 269        data_resource.start = virt_to_phys(_etext);
 270        data_resource.end = virt_to_phys(_edata)-1;
 271        bss_resource.start = virt_to_phys(__bss_start);
 272        bss_resource.end = virt_to_phys(_ebss)-1;
 273
 274#ifdef CONFIG_CMDLINE_OVERWRITE
 275        strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
 276#else
 277        strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
 278#ifdef CONFIG_CMDLINE_EXTEND
 279        strlcat(command_line, " ", sizeof(command_line));
 280        strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
 281#endif
 282#endif
 283
 284        /* Save unparsed command line copy for /proc/cmdline */
 285        memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 286        *cmdline_p = command_line;
 287
 288        parse_early_param();
 289
 290        plat_early_device_setup();
 291
 292        sh_mv_setup();
 293
 294        /* Let earlyprintk output early console messages */
 295        early_platform_driver_probe("earlyprintk", 1, 1);
 296
 297        paging_init();
 298
 299#ifdef CONFIG_DUMMY_CONSOLE
 300        conswitchp = &dummy_con;
 301#endif
 302
 303        /* Perform the machine specific initialisation */
 304        if (likely(sh_mv.mv_setup))
 305                sh_mv.mv_setup(cmdline_p);
 306
 307        plat_smp_setup();
 308}
 309
 310/* processor boot mode configuration */
 311int generic_mode_pins(void)
 312{
 313        pr_warning("generic_mode_pins(): missing mode pin configuration\n");
 314        return 0;
 315}
 316
 317int test_mode_pin(int pin)
 318{
 319        return sh_mv.mv_mode_pins() & pin;
 320}
 321