linux/drivers/ata/sata_uli.c
<<
>>
Prefs
   1/*
   2 *  sata_uli.c - ULi Electronics SATA
   3 *
   4 *
   5 *  This program is free software; you can redistribute it and/or modify
   6 *  it under the terms of the GNU General Public License as published by
   7 *  the Free Software Foundation; either version 2, or (at your option)
   8 *  any later version.
   9 *
  10 *  This program is distributed in the hope that it will be useful,
  11 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 *  GNU General Public License for more details.
  14 *
  15 *  You should have received a copy of the GNU General Public License
  16 *  along with this program; see the file COPYING.  If not, write to
  17 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  18 *
  19 *
  20 *  libata documentation is available via 'make {ps|pdf}docs',
  21 *  as Documentation/DocBook/libata.*
  22 *
  23 *  Hardware documentation available under NDA.
  24 *
  25 */
  26
  27#include <linux/kernel.h>
  28#include <linux/module.h>
  29#include <linux/gfp.h>
  30#include <linux/pci.h>
  31#include <linux/init.h>
  32#include <linux/blkdev.h>
  33#include <linux/delay.h>
  34#include <linux/interrupt.h>
  35#include <linux/device.h>
  36#include <scsi/scsi_host.h>
  37#include <linux/libata.h>
  38
  39#define DRV_NAME        "sata_uli"
  40#define DRV_VERSION     "1.3"
  41
  42enum {
  43        uli_5289                = 0,
  44        uli_5287                = 1,
  45        uli_5281                = 2,
  46
  47        uli_max_ports           = 4,
  48
  49        /* PCI configuration registers */
  50        ULI5287_BASE            = 0x90, /* sata0 phy SCR registers */
  51        ULI5287_OFFS            = 0x10, /* offset from sata0->sata1 phy regs */
  52        ULI5281_BASE            = 0x60, /* sata0 phy SCR  registers */
  53        ULI5281_OFFS            = 0x60, /* offset from sata0->sata1 phy regs */
  54};
  55
  56struct uli_priv {
  57        unsigned int            scr_cfg_addr[uli_max_ports];
  58};
  59
  60static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
  61static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
  62static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
  63
  64static const struct pci_device_id uli_pci_tbl[] = {
  65        { PCI_VDEVICE(AL, 0x5289), uli_5289 },
  66        { PCI_VDEVICE(AL, 0x5287), uli_5287 },
  67        { PCI_VDEVICE(AL, 0x5281), uli_5281 },
  68
  69        { }     /* terminate list */
  70};
  71
  72static struct pci_driver uli_pci_driver = {
  73        .name                   = DRV_NAME,
  74        .id_table               = uli_pci_tbl,
  75        .probe                  = uli_init_one,
  76        .remove                 = ata_pci_remove_one,
  77};
  78
  79static struct scsi_host_template uli_sht = {
  80        ATA_BMDMA_SHT(DRV_NAME),
  81};
  82
  83static struct ata_port_operations uli_ops = {
  84        .inherits               = &ata_bmdma_port_ops,
  85        .scr_read               = uli_scr_read,
  86        .scr_write              = uli_scr_write,
  87        .hardreset              = ATA_OP_NULL,
  88};
  89
  90static const struct ata_port_info uli_port_info = {
  91        .flags          = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
  92                          ATA_FLAG_IGN_SIMPLEX,
  93        .pio_mask       = ATA_PIO4,
  94        .udma_mask      = ATA_UDMA6,
  95        .port_ops       = &uli_ops,
  96};
  97
  98
  99MODULE_AUTHOR("Peer Chen");
 100MODULE_DESCRIPTION("low-level driver for ULi Electronics SATA controller");
 101MODULE_LICENSE("GPL");
 102MODULE_DEVICE_TABLE(pci, uli_pci_tbl);
 103MODULE_VERSION(DRV_VERSION);
 104
 105static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
 106{
 107        struct uli_priv *hpriv = ap->host->private_data;
 108        return hpriv->scr_cfg_addr[ap->port_no] + (4 * sc_reg);
 109}
 110
 111static u32 uli_scr_cfg_read(struct ata_link *link, unsigned int sc_reg)
 112{
 113        struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
 114        unsigned int cfg_addr = get_scr_cfg_addr(link->ap, sc_reg);
 115        u32 val;
 116
 117        pci_read_config_dword(pdev, cfg_addr, &val);
 118        return val;
 119}
 120
 121static void uli_scr_cfg_write(struct ata_link *link, unsigned int scr, u32 val)
 122{
 123        struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
 124        unsigned int cfg_addr = get_scr_cfg_addr(link->ap, scr);
 125
 126        pci_write_config_dword(pdev, cfg_addr, val);
 127}
 128
 129static int uli_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
 130{
 131        if (sc_reg > SCR_CONTROL)
 132                return -EINVAL;
 133
 134        *val = uli_scr_cfg_read(link, sc_reg);
 135        return 0;
 136}
 137
 138static int uli_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
 139{
 140        if (sc_reg > SCR_CONTROL) //SCR_CONTROL=2, SCR_ERROR=1, SCR_STATUS=0
 141                return -EINVAL;
 142
 143        uli_scr_cfg_write(link, sc_reg, val);
 144        return 0;
 145}
 146
 147static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 148{
 149        static int printed_version;
 150        const struct ata_port_info *ppi[] = { &uli_port_info, NULL };
 151        unsigned int board_idx = (unsigned int) ent->driver_data;
 152        struct ata_host *host;
 153        struct uli_priv *hpriv;
 154        void __iomem * const *iomap;
 155        struct ata_ioports *ioaddr;
 156        int n_ports, rc;
 157
 158        if (!printed_version++)
 159                dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 160
 161        rc = pcim_enable_device(pdev);
 162        if (rc)
 163                return rc;
 164
 165        n_ports = 2;
 166        if (board_idx == uli_5287)
 167                n_ports = 4;
 168
 169        /* allocate the host */
 170        host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 171        if (!host)
 172                return -ENOMEM;
 173
 174        hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
 175        if (!hpriv)
 176                return -ENOMEM;
 177        host->private_data = hpriv;
 178
 179        /* the first two ports are standard SFF */
 180        rc = ata_pci_sff_init_host(host);
 181        if (rc)
 182                return rc;
 183
 184        ata_pci_bmdma_init(host);
 185
 186        iomap = host->iomap;
 187
 188        switch (board_idx) {
 189        case uli_5287:
 190                /* If there are four, the last two live right after
 191                 * the standard SFF ports.
 192                 */
 193                hpriv->scr_cfg_addr[0] = ULI5287_BASE;
 194                hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
 195
 196                ioaddr = &host->ports[2]->ioaddr;
 197                ioaddr->cmd_addr = iomap[0] + 8;
 198                ioaddr->altstatus_addr =
 199                ioaddr->ctl_addr = (void __iomem *)
 200                        ((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
 201                ioaddr->bmdma_addr = iomap[4] + 16;
 202                hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
 203                ata_sff_std_ports(ioaddr);
 204
 205                ata_port_desc(host->ports[2],
 206                        "cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
 207                        (unsigned long long)pci_resource_start(pdev, 0) + 8,
 208                        ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4,
 209                        (unsigned long long)pci_resource_start(pdev, 4) + 16);
 210
 211                ioaddr = &host->ports[3]->ioaddr;
 212                ioaddr->cmd_addr = iomap[2] + 8;
 213                ioaddr->altstatus_addr =
 214                ioaddr->ctl_addr = (void __iomem *)
 215                        ((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
 216                ioaddr->bmdma_addr = iomap[4] + 24;
 217                hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
 218                ata_sff_std_ports(ioaddr);
 219
 220                ata_port_desc(host->ports[2],
 221                        "cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
 222                        (unsigned long long)pci_resource_start(pdev, 2) + 9,
 223                        ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4,
 224                        (unsigned long long)pci_resource_start(pdev, 4) + 24);
 225
 226                break;
 227
 228        case uli_5289:
 229                hpriv->scr_cfg_addr[0] = ULI5287_BASE;
 230                hpriv->scr_cfg_addr[1] = ULI5287_BASE + ULI5287_OFFS;
 231                break;
 232
 233        case uli_5281:
 234                hpriv->scr_cfg_addr[0] = ULI5281_BASE;
 235                hpriv->scr_cfg_addr[1] = ULI5281_BASE + ULI5281_OFFS;
 236                break;
 237
 238        default:
 239                BUG();
 240                break;
 241        }
 242
 243        pci_set_master(pdev);
 244        pci_intx(pdev, 1);
 245        return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 246                                 IRQF_SHARED, &uli_sht);
 247}
 248
 249static int __init uli_init(void)
 250{
 251        return pci_register_driver(&uli_pci_driver);
 252}
 253
 254static void __exit uli_exit(void)
 255{
 256        pci_unregister_driver(&uli_pci_driver);
 257}
 258
 259
 260module_init(uli_init);
 261module_exit(uli_exit);
 262