linux/drivers/block/paride/Transition-notes
<<
>>
Prefs
   1Lemma 1:
   2        If ps_tq is scheduled, ps_tq_active is 1.  ps_tq_int() can be called
   3        only when ps_tq_active is 1.
   4Proof:  All assignments to ps_tq_active and all scheduling of ps_tq happen
   5        under ps_spinlock.  There are three places where that can happen:
   6        one in ps_set_intr() (A) and two in ps_tq_int() (B and C).
   7        Consider the sequnce of these events.  A can not be preceded by
   8        anything except B, since it is under if (!ps_tq_active) under
   9        ps_spinlock.  C is always preceded by B, since we can't reach it
  10        other than through B and we don't drop ps_spinlock between them.
  11        IOW, the sequence is A?(BA|BC|B)*.  OTOH, number of B can not exceed
  12        the sum of numbers of A and C, since each call of ps_tq_int() is
  13        the result of ps_tq execution.  Therefore, the sequence starts with
  14        A and each B is preceded by either A or C.  Moments when we enter
  15        ps_tq_int() are sandwiched between {A,C} and B in that sequence,
  16        since at any time number of B can not exceed the number of these
  17        moments which, in turn, can not exceed the number of A and C.
  18        In other words, the sequence of events is (A or C set ps_tq_active to
  19        1 and schedule ps_tq, ps_tq is executed, ps_tq_int() is entered,
  20        B resets ps_tq_active)*.
  21
  22
  23consider the following area:
  24        * in do_pd_request1(): to calls of pi_do_claimed() and return in
  25          case when pd_req is NULL.
  26        * in next_request(): to call of do_pd_request1()
  27        * in do_pd_read(): to call of ps_set_intr()
  28        * in do_pd_read_start(): to calls of pi_do_claimed(), next_request()
  29and ps_set_intr()
  30        * in do_pd_read_drq(): to calls of pi_do_claimed() and next_request()
  31        * in do_pd_write(): to call of ps_set_intr()
  32        * in do_pd_write_start(): to calls of pi_do_claimed(), next_request()
  33and ps_set_intr()
  34        * in do_pd_write_done(): to calls of pi_do_claimed() and next_request()
  35        * in ps_set_intr(): to check for ps_tq_active and to scheduling
  36          ps_tq if ps_tq_active was 0.
  37        * in ps_tq_int(): from the moment when we get ps_spinlock() to the
  38          return, call of con() or scheduling ps_tq.
  39        * in pi_schedule_claimed() when called from pi_do_claimed() called from
  40          pd.c, everything until returning 1 or setting or setting ->claim_cont
  41          on the path that returns 0
  42        * in pi_do_claimed() when called from pd.c, everything until the call
  43          of pi_do_claimed() plus the everything until the call of cont() if
  44          pi_do_claimed() has returned 1.
  45        * in pi_wake_up() called for PIA that belongs to pd.c, everything from
  46          the moment when pi_spinlock has been acquired.
  47
  48Lemma 2:
  49        1) at any time at most one thread of execution can be in that area or
  50        be preempted there.
  51        2) When there is such a thread, pd_busy is set or pd_lock is held by
  52        that thread.
  53        3) When there is such a thread, ps_tq_active is 0 or ps_spinlock is
  54        held by that thread.
  55        4) When there is such a thread, all PIA belonging to pd.c have NULL
  56        ->claim_cont or pi_spinlock is held by thread in question.
  57
  58Proof:  consider the first moment when the above is not true.
  59
  60(1) can become not true if some thread enters that area while another is there.
  61        a) do_pd_request1() can be called from next_request() or do_pd_request()
  62           In the first case the thread was already in the area.  In the second,
  63           the thread was holding pd_lock and found pd_busy not set, which would
  64           mean that (2) was already not true.
  65        b) ps_set_intr() and pi_schedule_claimed() can be called only from the
  66           area.
  67        c) pi_do_claimed() is called by pd.c only from the area.
  68        d) ps_tq_int() can enter the area only when the thread is holding
  69           ps_spinlock and ps_tq_active is 1 (due to Lemma 1).  It means that
  70           (3) was already not true.
  71        e) do_pd_{read,write}* could be called only from the area.  The only
  72           case that needs consideration is call from pi_wake_up() and there
  73           we would have to be called for the PIA that got ->claimed_cont
  74           from pd.c.  That could happen only if pi_do_claimed() had been
  75           called from pd.c for that PIA, which happens only for PIA belonging
  76           to pd.c.
  77        f) pi_wake_up() can enter the area only when the thread is holding
  78           pi_spinlock and ->claimed_cont is non-NULL for PIA belonging to
  79           pd.c.  It means that (4) was already not true.
  80
  81(2) can become not true only when pd_lock is released by the thread in question.
  82        Indeed, pd_busy is reset only in the area and thread that resets
  83        it is holding pd_lock.  The only place within the area where we
  84        release pd_lock is in pd_next_buf() (called from within the area).
  85        But that code does not reset pd_busy, so pd_busy would have to be
  86        0 when pd_next_buf() had acquired pd_lock.  If it become 0 while
  87        we were acquiring the lock, (1) would be already false, since
  88        the thread that had reset it would be in the area simulateously.
  89        If it was 0 before we tried to acquire pd_lock, (2) would be
  90        already false.
  91
  92For similar reasons, (3) can become not true only when ps_spinlock is released
  93by the thread in question.  However, all such places within the area are right
  94after resetting ps_tq_active to 0.
  95
  96(4) is done the same way - all places where we release pi_spinlock within
  97the area are either after resetting ->claimed_cont to NULL while holding
  98pi_spinlock, or after not tocuhing ->claimed_cont since acquiring pi_spinlock
  99also in the area.  The only place where ->claimed_cont is made non-NULL is
 100in the area, under pi_spinlock and we do not release it until after leaving
 101the area.
 102
 103QED.
 104
 105
 106Corollary 1: ps_tq_active can be killed.  Indeed, the only place where we
 107check its value is in ps_set_intr() and if it had been non-zero at that
 108point, we would have violated either (2.1) (if it was set while ps_set_intr()
 109was acquiring ps_spinlock) or (2.3) (if it was set when we started to
 110acquire ps_spinlock).
 111
 112Corollary 2: ps_spinlock can be killed.  Indeed, Lemma 1 and Lemma 2 show
 113that the only possible contention is between scheduling ps_tq followed by
 114immediate release of spinlock and beginning of execution of ps_tq on
 115another CPU.
 116
 117Corollary 3: assignment to pd_busy in do_pd_read_start() and do_pd_write_start()
 118can be killed.  Indeed, we are not holding pd_lock and thus pd_busy is already
 1191 here.
 120
 121Corollary 4: in ps_tq_int() uses of con can be replaced with uses of
 122ps_continuation, since the latter is changed only from the area.
 123We don't need to reset it to NULL, since we are guaranteed that there
 124will be a call of ps_set_intr() before we look at ps_continuation again.
 125We can remove the check for ps_continuation being NULL for the same
 126reason - the value is guaranteed to be set by the last ps_set_intr() and
 127we never pass it NULL.  Assignements in the beginning of ps_set_intr()
 128can be taken to callers as long as they remain within the area.
 129