/*
  * A driver for the PCMCIA Smartcard Reader "Omnikey CardMan Mobile 4000"
  *
  * cm4000_cs.c support.linux@omnikey.com
  *
  * Tue Oct 23 11:32:43 GMT 2001 herp - cleaned up header files
  * Sun Jan 20 10:11:15 MET 2002 herp - added modversion header files
  * Thu Nov 14 16:34:11 GMT 2002 mh   - added PPS functionality
  * Tue Nov 19 16:36:27 GMT 2002 mh   - added SUSPEND/RESUME functionailty
  * Wed Jul 28 12:55:01 CEST 2004 mh  - kernel 2.6 adjustments
  *
  * current version: 2.4.0gm4
  *
  * (C) 2000,2001,2002,2003,2004 Omnikey AG
  *
  * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
  *     - Adhere to Kernel CodingStyle
  *     - Port to 2.6.13 "new" style PCMCIA
  *     - Check for copy_{from,to}_user return values
  *     - Use nonseekable_open()
  *     - add class interface for udev device creation
  *
  * All rights reserved. Licensed under dual BSD/GPL license.
  */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include <linux/bitrev.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/io.h>

#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>

#include <linux/cm4000_cs.h>

/* #define ATR_CSUM */

#define reader_to_dev(x)        (&x->p_dev->dev)

/* n (debug level) is ignored */
/* additional debug output may be enabled by re-compiling with
 * CM4000_DEBUG set */
/* #define CM4000_DEBUG */
#define DEBUGP(n, rdr, x, args...) do {                 \
                dev_dbg(reader_to_dev(rdr), "%s:" x,    \
                           __func__ , ## args);         \
        } while (0)

static DEFINE_MUTEX(cmm_mutex);

#define T_1SEC          (HZ)
#define T_10MSEC        msecs_to_jiffies(10)
#define T_20MSEC        msecs_to_jiffies(20)
#define T_40MSEC        msecs_to_jiffies(40)
#define T_50MSEC        msecs_to_jiffies(50)
#define T_100MSEC       msecs_to_jiffies(100)
#define T_500MSEC       msecs_to_jiffies(500)

static void cm4000_release(struct pcmcia_device *link);

static int major;               /* major number we get from the kernel */

/* note: the first state has to have number 0 always */

#define M_FETCH_ATR     0
#define M_TIMEOUT_WAIT  1
#define M_READ_ATR_LEN  2
#define M_READ_ATR      3
#define M_ATR_PRESENT   4
#define M_BAD_CARD      5
#define M_CARDOFF       6

#define LOCK_IO                 0
#define LOCK_MONITOR            1

#define IS_AUTOPPS_ACT           6
#define IS_PROCBYTE_PRESENT      7
#define IS_INVREV                8
#define IS_ANY_T0                9
#define IS_ANY_T1               10
#define IS_ATR_PRESENT          11
#define IS_ATR_VALID            12
#define IS_CMM_ABSENT           13
#define IS_BAD_LENGTH           14
#define IS_BAD_CSUM             15
#define IS_BAD_CARD             16

#define REG_FLAGS0(x)           (x + 0)
#define REG_FLAGS1(x)           (x + 1)
#define REG_NUM_BYTES(x)        (x + 2)
#define REG_BUF_ADDR(x)         (x + 3)
#define REG_BUF_DATA(x)         (x + 4)
#define REG_NUM_SEND(x)         (x + 5)
#define REG_BAUDRATE(x)         (x + 6)
#define REG_STOPBITS(x)         (x + 7)

struct cm4000_dev {
        struct pcmcia_device *p_dev;

        unsigned char atr[MAX_ATR];
        unsigned char rbuf[512];
        unsigned char sbuf[512];

        wait_queue_head_t devq;         /* when removing cardman must not be
                                           zeroed! */

        wait_queue_head_t ioq;          /* if IO is locked, wait on this Q */
        wait_queue_head_t atrq;         /* wait for ATR valid */
        wait_queue_head_t readq;        /* used by write to wake blk.read */

        /* warning: do not move this fields.
         * initialising to zero depends on it - see ZERO_DEV below.  */
        unsigned char atr_csum;
        unsigned char atr_len_retry;
        unsigned short atr_len;
        unsigned short rlen;    /* bytes avail. after write */
        unsigned short rpos;    /* latest read pos. write zeroes */
        unsigned char procbyte; /* T=0 procedure byte */
        unsigned char mstate;   /* state of card monitor */
        unsigned char cwarn;    /* slow down warning */
        unsigned char flags0;   /* cardman IO-flags 0 */
        unsigned char flags1;   /* cardman IO-flags 1 */
        unsigned int mdelay;    /* variable monitor speeds, in jiffies */

        unsigned int baudv;     /* baud value for speed */
        unsigned char ta1;
        unsigned char proto;    /* T=0, T=1, ... */
        unsigned long flags;    /* lock+flags (MONITOR,IO,ATR) * for concurrent
                                   access */

        unsigned char pts[4];

        struct timer_list timer;        /* used to keep monitor running */
        int monitor_running;
};

#define ZERO_DEV(dev)                                           \
        memset(&dev->atr_csum,0,                                \
                sizeof(struct cm4000_dev) -                     \
                offsetof(struct cm4000_dev, atr_csum))

static struct pcmcia_device *dev_table[CM4000_MAX_DEV];
static struct class *cmm_class;

/* This table doesn't use spaces after the comma between fields and thus
 * violates CodingStyle.  However, I don't really think wrapping it around will
 * make it any clearer to read -HW */
static unsigned char fi_di_table[10][14] = {
/*FI     00   01   02   03   04   05   06   07   08   09   10   11   12   13 */
/*DI */
/* 0 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
/* 1 */ {0x01,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x91,0x11,0x11,0x11,0x11},
/* 2 */ {0x02,0x12,0x22,0x32,0x11,0x11,0x11,0x11,0x11,0x92,0xA2,0xB2,0x11,0x11},
/* 3 */ {0x03,0x13,0x23,0x33,0x43,0x53,0x63,0x11,0x11,0x93,0xA3,0xB3,0xC3,0xD3},
/* 4 */ {0x04,0x14,0x24,0x34,0x44,0x54,0x64,0x11,0x11,0x94,0xA4,0xB4,0xC4,0xD4},
/* 5 */ {0x00,0x15,0x25,0x35,0x45,0x55,0x65,0x11,0x11,0x95,0xA5,0xB5,0xC5,0xD5},
/* 6 */ {0x06,0x16,0x26,0x36,0x46,0x56,0x66,0x11,0x11,0x96,0xA6,0xB6,0xC6,0xD6},
/* 7 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
/* 8 */ {0x08,0x11,0x28,0x38,0x48,0x58,0x68,0x11,0x11,0x98,0xA8,0xB8,0xC8,0xD8},
/* 9 */ {0x09,0x19,0x29,0x39,0x49,0x59,0x69,0x11,0x11,0x99,0xA9,0xB9,0xC9,0xD9}
};

#ifndef CM4000_DEBUG
#define xoutb   outb
#define xinb    inb
#else
static inline void xoutb(unsigned char val, unsigned short port)
{
        pr_debug("outb(val=%.2x,port=%.4x)\n", val, port);
        outb(val, port);
}
static inline unsigned char xinb(unsigned short port)
{
        unsigned char val;

        val = inb(port);
        pr_debug("%.2x=inb(%.4x)\n", val, port);

        return val;
}
#endif

static inline unsigned char invert_revert(unsigned char ch)
{
        return bitrev8(~ch);
}

static void str_invert_revert(unsigned char *b, int len)
{
        int i;

        for (i = 0; i < len; i++)
                b[i] = invert_revert(b[i]);
}

#define ATRLENCK(dev,pos) \
        if (pos>=dev->atr_len || pos>=MAX_ATR) \
                goto return_0;

static unsigned int calc_baudv(unsigned char fidi)
{
        unsigned int wcrcf, wbrcf, fi_rfu, di_rfu;

        fi_rfu = 372;
        di_rfu = 1;

        /* FI */
        switch ((fidi >> 4) & 0x0F) {
        case 0x00:
                wcrcf = 372;
                break;
        case 0x01:
                wcrcf = 372;
                break;
        case 0x02:
                wcrcf = 558;
                break;
        case 0x03:
                wcrcf = 744;
                break;
        case 0x04:
                wcrcf = 1116;
                break;
        case 0x05:
                wcrcf = 1488;
                break;
        case 0x06:
                wcrcf = 1860;
                break;
        case 0x07:
                wcrcf = fi_rfu;
                break;
        case 0x08:
                wcrcf = fi_rfu;
                break;
        case 0x09:
                wcrcf = 512;
                break;
        case 0x0A:
                wcrcf = 768;
                break;
        case 0x0B:
                wcrcf = 1024;
                break;
        case 0x0C:
                wcrcf = 1536;
                break;
        case 0x0D:
                wcrcf = 2048;
                break;
        default:
                wcrcf = fi_rfu;
                break;
        }

        /* DI */
        switch (fidi & 0x0F) {
        case 0x00:
                wbrcf = di_rfu;
                break;
        case 0x01:
                wbrcf = 1;
                break;
        case 0x02:
                wbrcf = 2;
                break;
        case 0x03:
                wbrcf = 4;
                break;
        case 0x04:
                wbrcf = 8;
                break;
        case 0x05:
                wbrcf = 16;
                break;
        case 0x06:
                wbrcf = 32;
                break;
        case 0x07:
                wbrcf = di_rfu;
                break;
        case 0x08:
                wbrcf = 12;
                break;
        case 0x09:
                wbrcf = 20;
                break;
        default:
                wbrcf = di_rfu;
                break;
        }

        return (wcrcf / wbrcf);
}

static unsigned short io_read_num_rec_bytes(unsigned int iobase,
                                            unsigned short *s)
{
        unsigned short tmp;

        tmp = *s = 0;
        do {
                *s = tmp;
                tmp = inb(REG_NUM_BYTES(iobase)) |
                                (inb(REG_FLAGS0(iobase)) & 4 ? 0x100 : 0);
        } while (tmp != *s);

        return *s;
}

static int parse_atr(struct cm4000_dev *dev)
{
        unsigned char any_t1, any_t0;
        unsigned char ch, ifno;
        int ix, done;

        DEBUGP(3, dev, "-> parse_atr: dev->atr_len = %i\n", dev->atr_len);

        if (dev->atr_len < 3) {
                DEBUGP(5, dev, "parse_atr: atr_len < 3\n");
                return 0;
        }

        if (dev->atr[0] == 0x3f)
                set_bit(IS_INVREV, &dev->flags);
        else
                clear_bit(IS_INVREV, &dev->flags);
        ix = 1;
        ifno = 1;
        ch = dev->atr[1];
        dev->proto = 0;         /* XXX PROTO */
        any_t1 = any_t0 = done = 0;
        dev->ta1 = 0x11;        /* defaults to 9600 baud */
        do {
                if (ifno == 1 && (ch & 0x10)) {
                        /* read first interface byte and TA1 is present */
                        dev->ta1 = dev->atr[2];
                        DEBUGP(5, dev, "Card says FiDi is 0x%.2x\n", dev->ta1);
                        ifno++;
                } else if ((ifno == 2) && (ch & 0x10)) { /* TA(2) */
                        dev->ta1 = 0x11;
                        ifno++;
                }

                DEBUGP(5, dev, "Yi=%.2x\n", ch & 0xf0);
                ix += ((ch & 0x10) >> 4)        /* no of int.face chars */
                    +((ch & 0x20) >> 5)
                    + ((ch & 0x40) >> 6)
                    + ((ch & 0x80) >> 7);
                /* ATRLENCK(dev,ix); */
                if (ch & 0x80) {        /* TDi */
                        ch = dev->atr[ix];
                        if ((ch & 0x0f)) {
                                any_t1 = 1;
                                DEBUGP(5, dev, "card is capable of T=1\n");
                        } else {
                                any_t0 = 1;
                                DEBUGP(5, dev, "card is capable of T=0\n");
                        }
                } else
                        done = 1;
        } while (!done);

        DEBUGP(5, dev, "ix=%d noHist=%d any_t1=%d\n",
              ix, dev->atr[1] & 15, any_t1);
        if (ix + 1 + (dev->atr[1] & 0x0f) + any_t1 != dev->atr_len) {
                DEBUGP(5, dev, "length error\n");
                return 0;
        }
        if (any_t0)
                set_bit(IS_ANY_T0, &dev->flags);

        if (any_t1) {           /* compute csum */
                dev->atr_csum = 0;
#ifdef ATR_CSUM
                for (i = 1; i < dev->atr_len; i++)
                        dev->atr_csum ^= dev->atr[i];
                if (dev->atr_csum) {
                        set_bit(IS_BAD_CSUM, &dev->flags);
                        DEBUGP(5, dev, "bad checksum\n");
                        goto return_0;
                }
#endif
                if (any_t0 == 0)
                        dev->proto = 1; /* XXX PROTO */
                set_bit(IS_ANY_T1, &dev->flags);
        }

        return 1;
}

struct card_fixup {
        char atr[12];
        u_int8_t atr_len;
        u_int8_t stopbits;
};

static struct card_fixup card_fixups[] = {
        {       /* ACOS */
                .atr = { 0x3b, 0xb3, 0x11, 0x00, 0x00, 0x41, 0x01 },
                .atr_len = 7,
                .stopbits = 0x03,
        },
        {       /* Motorola */
                .atr = {0x3b, 0x76, 0x13, 0x00, 0x00, 0x80, 0x62, 0x07,
                        0x41, 0x81, 0x81 },
                .atr_len = 11,
                .stopbits = 0x04,
        },
};

static void set_cardparameter(struct cm4000_dev *dev)
{
        int i;
        unsigned int iobase = dev->p_dev->resource[0]->start;
        u_int8_t stopbits = 0x02; /* ISO default */

        DEBUGP(3, dev, "-> set_cardparameter\n");

        dev->flags1 = dev->flags1 | (((dev->baudv - 1) & 0x0100) >> 8);
        xoutb(dev->flags1, REG_FLAGS1(iobase));
        DEBUGP(5, dev, "flags1 = 0x%02x\n", dev->flags1);

        /* set baudrate */
        xoutb((unsigned char)((dev->baudv - 1) & 0xFF), REG_BAUDRATE(iobase));

        DEBUGP(5, dev, "baudv = %i -> write 0x%02x\n", dev->baudv,
              ((dev->baudv - 1) & 0xFF));

        /* set stopbits */
        for (i = 0; i < ARRAY_SIZE(card_fixups); i++) {
                if (!memcmp(dev->atr, card_fixups[i].atr,
                            card_fixups[i].atr_len))
                        stopbits = card_fixups[i].stopbits;
        }
        xoutb(stopbits, REG_STOPBITS(iobase));

        DEBUGP(3, dev, "<- set_cardparameter\n");
}

static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
{

        unsigned long tmp, i;
        unsigned short num_bytes_read;
        unsigned char pts_reply[4];
        ssize_t rc;
        unsigned int iobase = dev->p_dev->resource[0]->start;

        rc = 0;

        DEBUGP(3, dev, "-> set_protocol\n");
        DEBUGP(5, dev, "ptsreq->Protocol = 0x%.8x, ptsreq->Flags=0x%.8x, "
                 "ptsreq->pts1=0x%.2x, ptsreq->pts2=0x%.2x, "
                 "ptsreq->pts3=0x%.2x\n", (unsigned int)ptsreq->protocol,
                 (unsigned int)ptsreq->flags, ptsreq->pts1, ptsreq->pts2,
                 ptsreq->pts3);

        /* Fill PTS structure */
        dev->pts[0] = 0xff;
        dev->pts[1] = 0x00;
        tmp = ptsreq->protocol;
        while ((tmp = (tmp >> 1)) > 0)
                dev->pts[1]++;
        dev->proto = dev->pts[1];       /* Set new protocol */
        dev->pts[1] = (0x01 << 4) | (dev->pts[1]);

        /* Correct Fi/Di according to CM4000 Fi/Di table */
        DEBUGP(5, dev, "Ta(1) from ATR is 0x%.2x\n", dev->ta1);
        /* set Fi/Di according to ATR TA(1) */
        dev->pts[2] = fi_di_table[dev->ta1 & 0x0F][(dev->ta1 >> 4) & 0x0F];

        /* Calculate PCK character */
        dev->pts[3] = dev->pts[0] ^ dev->pts[1] ^ dev->pts[2];

        DEBUGP(5, dev, "pts0=%.2x, pts1=%.2x, pts2=%.2x, pts3=%.2x\n",
               dev->pts[0], dev->pts[1], dev->pts[2], dev->pts[3]);

        /* check card convention */
        if (test_bit(IS_INVREV, &dev->flags))
                str_invert_revert(dev->pts, 4);

        /* reset SM */
        xoutb(0x80, REG_FLAGS0(iobase));

        /* Enable access to the message buffer */
        DEBUGP(5, dev, "Enable access to the messages buffer\n");
        dev->flags1 = 0x20      /* T_Active */
            | (test_bit(IS_INVREV, &dev->flags) ? 0x02 : 0x00) /* inv parity */
            | ((dev->baudv >> 8) & 0x01);       /* MSB-baud */
        xoutb(dev->flags1, REG_FLAGS1(iobase));

        DEBUGP(5, dev, "Enable message buffer -> flags1 = 0x%.2x\n",
               dev->flags1);

        /* write challenge to the buffer */
        DEBUGP(5, dev, "Write challenge to buffer: ");
        for (i = 0; i < 4; i++) {
                xoutb(i, REG_BUF_ADDR(iobase));
                xoutb(dev->pts[i], REG_BUF_DATA(iobase));       /* buf data */
#ifdef CM4000_DEBUG
                pr_debug("0x%.2x ", dev->pts[i]);
        }
        pr_debug("\n");
#else
        }
#endif

        /* set number of bytes to write */
        DEBUGP(5, dev, "Set number of bytes to write\n");
        xoutb(0x04, REG_NUM_SEND(iobase));

        /* Trigger CARDMAN CONTROLLER */
        xoutb(0x50, REG_FLAGS0(iobase));

        /* Monitor progress */
        /* wait for xmit done */
        DEBUGP(5, dev, "Waiting for NumRecBytes getting valid\n");

        for (i = 0; i < 100; i++) {
                if (inb(REG_FLAGS0(iobase)) & 0x08) {
                        DEBUGP(5, dev, "NumRecBytes is valid\n");
                        break;
                }
                mdelay(10);
        }
        if (i == 100) {
                DEBUGP(5, dev, "Timeout waiting for NumRecBytes getting "
                       "valid\n");
                rc = -EIO;
                goto exit_setprotocol;
        }

        DEBUGP(5, dev, "Reading NumRecBytes\n");
        for (i = 0; i < 100; i++) {
                io_read_num_rec_bytes(iobase, &num_bytes_read);
                if (num_bytes_read >= 4) {
                        DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read);
                        break;
                }
                mdelay(10);
        }

        /* check whether it is a short PTS reply? */
        if (num_bytes_read == 3)
                i = 0;

        if (i == 100) {
                DEBUGP(5, dev, "Timeout reading num_bytes_read\n");
                rc = -EIO;
                goto exit_setprotocol;
        }

        DEBUGP(5, dev, "Reset the CARDMAN CONTROLLER\n");
        xoutb(0x80, REG_FLAGS0(iobase));

        /* Read PPS reply */
        DEBUGP(5, dev, "Read PPS reply\n");
        for (i = 0; i < num_bytes_read; i++) {
                xoutb(i, REG_BUF_ADDR(iobase));
                pts_reply[i] = inb(REG_BUF_DATA(iobase));
        }

#ifdef CM4000_DEBUG
        DEBUGP(2, dev, "PTSreply: ");
        for (i = 0; i < num_bytes_read; i++) {
                pr_debug("0x%.2x ", pts_reply[i]);
        }
        pr_debug("\n");
#endif  /* CM4000_DEBUG */

        DEBUGP(5, dev, "Clear Tactive in Flags1\n");
        xoutb(0x20, REG_FLAGS1(iobase));

        /* Compare ptsreq and ptsreply */
        if ((dev->pts[0] == pts_reply[0]) &&
            (dev->pts[1] == pts_reply[1]) &&
            (dev->pts[2] == pts_reply[2]) && (dev->pts[3] == pts_reply[3])) {
                /* setcardparameter according to PPS */
                dev->baudv = calc_baudv(dev->pts[2]);
                set_cardparameter(dev);
        } else if ((dev->pts[0] == pts_reply[0]) &&
                   ((dev->pts[1] & 0xef) == pts_reply[1]) &&
                   ((pts_reply[0] ^ pts_reply[1]) == pts_reply[2])) {
                /* short PTS reply, set card parameter to default values */
                dev->baudv = calc_baudv(0x11);
                set_cardparameter(dev);
        } else
                rc = -EIO;

exit_setprotocol:
        DEBUGP(3, dev, "<- set_protocol\n");
        return rc;
}

static int io_detect_cm4000(unsigned int iobase, struct cm4000_dev *dev)
{

        /* note: statemachine is assumed to be reset */
        if (inb(REG_FLAGS0(iobase)) & 8) {
                clear_bit(IS_ATR_VALID, &dev->flags);
                set_bit(IS_CMM_ABSENT, &dev->flags);
                return 0;       /* detect CMM = 1 -> failure */
        }
        /* xoutb(0x40, REG_FLAGS1(iobase)); detectCMM */
        xoutb(dev->flags1 | 0x40, REG_FLAGS1(iobase));
        if ((inb(REG_FLAGS0(iobase)) & 8) == 0) {
                clear_bit(IS_ATR_VALID, &dev->flags);
                set_bit(IS_CMM_ABSENT, &dev->flags);
                return 0;       /* detect CMM=0 -> failure */
        }
        /* clear detectCMM again by restoring original flags1 */
        xoutb(dev->flags1, REG_FLAGS1(iobase));
        return 1;
}

static void terminate_monitor(struct cm4000_dev *dev)
{

        /* tell the monitor to stop and wait until
         * it terminates.
         */
        DEBUGP(3, dev, "-> terminate_monitor\n");
        wait_event_interruptible(dev->devq,
                                 test_and_set_bit(LOCK_MONITOR,
                                                  (void *)&dev->flags));

        /* now, LOCK_MONITOR has been set.
         * allow a last cycle in the monitor.
         * the monitor will indicate that it has
         * finished by clearing this bit.
         */
        DEBUGP(5, dev, "Now allow last cycle of monitor!\n");
        while (test_bit(LOCK_MONITOR, (void *)&dev->flags))
                msleep(25);

        DEBUGP(5, dev, "Delete timer\n");
        del_timer_sync(&dev->timer);
#ifdef CM4000_DEBUG
        dev->monitor_running = 0;
#endif

        DEBUGP(3, dev, "<- terminate_monitor\n");
}

/*
 * monitor the card every 50msec. as a side-effect, retrieve the
 * atr once a card is inserted. another side-effect of retrieving the
 * atr is that the card will be powered on, so there is no need to
 * power on the card explictely from the application: the driver
 * is already doing that for you.
 */

static void monitor_card(unsigned long p)
{
        struct cm4000_dev *dev = (struct cm4000_dev *) p;
        unsigned int iobase = dev->p_dev->resource[0]->start;
        unsigned short s;
        struct ptsreq ptsreq;
        int i, atrc;

        DEBUGP(7, dev, "->  monitor_card\n");

        /* if someone has set the lock for us: we're done! */
        if (test_and_set_bit(LOCK_MONITOR, &dev->flags)) {
                DEBUGP(4, dev, "About to stop monitor\n");
                /* no */
                dev->rlen =
                    dev->rpos =
                    dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0;
                dev->mstate = M_FETCH_ATR;
                clear_bit(LOCK_MONITOR, &dev->flags);
                /* close et al. are sleeping on devq, so wake it */
                wake_up_interruptible(&dev->devq);
                DEBUGP(2, dev, "<- monitor_card (we are done now)\n");
                return;
        }

        /* try to lock io: if it is already locked, just add another timer */
        if (test_and_set_bit(LOCK_IO, (void *)&dev->flags)) {
                DEBUGP(4, dev, "Couldn't get IO lock\n");
                goto return_with_timer;
        }

        /* is a card/a reader inserted at all ? */
        dev->flags0 = xinb(REG_FLAGS0(iobase));
        DEBUGP(7, dev, "dev->flags0 = 0x%2x\n", dev->flags0);
        DEBUGP(7, dev, "smartcard present: %s\n",
               dev->flags0 & 1 ? "yes" : "no");
        DEBUGP(7, dev, "cardman present: %s\n",
               dev->flags0 == 0xff ? "no" : "yes");

        if ((dev->flags0 & 1) == 0      /* no smartcard inserted */
            || dev->flags0 == 0xff) {   /* no cardman inserted */
                /* no */
                dev->rlen =
                    dev->rpos =
                    dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0;
                dev->mstate = M_FETCH_ATR;

                dev->flags &= 0x000000ff; /* only keep IO and MONITOR locks */

                if (dev->flags0 == 0xff) {
                        DEBUGP(4, dev, "set IS_CMM_ABSENT bit\n");
                        set_bit(IS_CMM_ABSENT, &dev->flags);
                } else if (test_bit(IS_CMM_ABSENT, &dev->flags)) {
                        DEBUGP(4, dev, "clear IS_CMM_ABSENT bit "
                               "(card is removed)\n");
                        clear_bit(IS_CMM_ABSENT, &dev->flags);
                }

                goto release_io;
        } else if ((dev->flags0 & 1) && test_bit(IS_CMM_ABSENT, &dev->flags)) {
                /* cardman and card present but cardman was absent before
                 * (after suspend with inserted card) */
                DEBUGP(4, dev, "clear IS_CMM_ABSENT bit (card is inserted)\n");
                clear_bit(IS_CMM_ABSENT, &dev->flags);
        }

        if (test_bit(IS_ATR_VALID, &dev->flags) == 1) {
                DEBUGP(7, dev, "believe ATR is already valid (do nothing)\n");
                goto release_io;
        }

        switch (dev->mstate) {
                unsigned char flags0;
        case M_CARDOFF:
                DEBUGP(4, dev, "M_CARDOFF\n");
                flags0 = inb(REG_FLAGS0(iobase));
                if (flags0 & 0x02) {
                        /* wait until Flags0 indicate power is off */
                        dev->mdelay = T_10MSEC;
                } else {
                        /* Flags0 indicate power off and no card inserted now;
                         * Reset CARDMAN CONTROLLER */
                        xoutb(0x80, REG_FLAGS0(iobase));

                        /* prepare for fetching ATR again: after card off ATR
                         * is read again automatically */
                        dev->rlen =
                            dev->rpos =
                            dev->atr_csum =
                            dev->atr_len_retry = dev->cwarn = 0;
                        dev->mstate = M_FETCH_ATR;

                        /* minimal gap between CARDOFF and read ATR is 50msec */
                        dev->mdelay = T_50MSEC;
                }
                break;
        case M_FETCH_ATR:
                DEBUGP(4, dev, "M_FETCH_ATR\n");
                xoutb(0x80, REG_FLAGS0(iobase));
                DEBUGP(4, dev, "Reset BAUDV to 9600\n");
                dev->baudv = 0x173;     /* 9600 */
                xoutb(0x02, REG_STOPBITS(iobase));      /* stopbits=2 */
                xoutb(0x73, REG_BAUDRATE(iobase));      /* baud value */
                xoutb(0x21, REG_FLAGS1(iobase));        /* T_Active=1, baud
                                                           value */
                /* warm start vs. power on: */
                xoutb(dev->flags0 & 2 ? 0x46 : 0x44, REG_FLAGS0(iobase));
                dev->mdelay = T_40MSEC;
                dev->mstate = M_TIMEOUT_WAIT;
                break;
        case M_TIMEOUT_WAIT:
                DEBUGP(4, dev, "M_TIMEOUT_WAIT\n");
                /* numRecBytes */
                io_read_num_rec_bytes(iobase, &dev->atr_len);
                dev->mdelay = T_10MSEC;
                dev->mstate = M_READ_ATR_LEN;
                break;
        case M_READ_ATR_LEN:
                DEBUGP(4, dev, "M_READ_ATR_LEN\n");
                /* infinite loop possible, since there is no timeout */

#define MAX_ATR_LEN_RETRY       100

                if (dev->atr_len == io_read_num_rec_bytes(iobase, &s)) {
                        if (dev->atr_len_retry++ >= MAX_ATR_LEN_RETRY) {                                        /* + XX msec */
                                dev->mdelay = T_10MSEC;
                                dev->mstate = M_READ_ATR;
                        }
                } else {
                        dev->atr_len = s;
                        dev->atr_len_retry = 0; /* set new timeout */
                }

                DEBUGP(4, dev, "Current ATR_LEN = %i\n", dev->atr_len);
                break;
        case M_READ_ATR:
                DEBUGP(4, dev, "M_READ_ATR\n");
                xoutb(0x80, REG_FLAGS0(iobase));        /* reset SM */
                for (i = 0; i < dev->atr_len; i++) {
                        xoutb(i, REG_BUF_ADDR(iobase));
                        dev->atr[i] = inb(REG_BUF_DATA(iobase));
                }
                /* Deactivate T_Active flags */
                DEBUGP(4, dev, "Deactivate T_Active flags\n");
                dev->flags1 = 0x01;
                xoutb(dev->flags1, REG_FLAGS1(iobase));

                /* atr is present (which doesnt mean it's valid) */
                set_bit(IS_ATR_PRESENT, &dev->flags);
                if (dev->atr[0] == 0x03)
                        str_invert_revert(dev->atr, dev->atr_len);
                atrc = parse_atr(dev);
                if (atrc == 0) {        /* atr invalid */
                        dev->mdelay = 0;
                        dev->mstate = M_BAD_CARD;
                } else {
                        dev->mdelay = T_50MSEC;
                        dev->mstate = M_ATR_PRESENT;
                        set_bit(IS_ATR_VALID, &dev->flags);
                }

                if (test_bit(IS_ATR_VALID, &dev->flags) == 1) {
                        DEBUGP(4, dev, "monitor_card: ATR valid\n");
                        /* if ta1 == 0x11, no PPS necessary (default values) */
                        /* do not do PPS with multi protocol cards */
                        if ((test_bit(IS_AUTOPPS_ACT, &dev->flags) == 0) &&
                            (dev->ta1 != 0x11) &&
                            !(test_bit(IS_ANY_T0, &dev->flags) &&
                            test_bit(IS_ANY_T1, &dev->flags))) {
                                DEBUGP(4, dev, "Perform AUTOPPS\n");
                                set_bit(IS_AUTOPPS_ACT, &dev->flags);
                                ptsreq.protocol = (0x01 << dev->proto);
                                ptsreq.flags = 0x01;
                                ptsreq.pts1 = 0x00;
                                ptsreq.pts2 = 0x00;
                                ptsreq.pts3 = 0x00;
                                if (set_protocol(dev, &ptsreq) == 0) {
                                        DEBUGP(4, dev, "AUTOPPS ret SUCC\n");
                                        clear_bit(IS_AUTOPPS_ACT, &dev->flags);
                                        wake_up_interruptible(&dev->atrq);
                                } else {
                                        DEBUGP(4, dev, "AUTOPPS failed: "
                                               "repower using defaults\n");
                                        /* prepare for repowering  */
                                        clear_bit(IS_ATR_PRESENT, &dev->flags);
                                        clear_bit(IS_ATR_VALID, &dev->flags);
                                        dev->rlen =
                                            dev->rpos =
                                            dev->atr_csum =
                                            dev->atr_len_retry = dev->cwarn = 0;
                                        dev->mstate = M_FETCH_ATR;

                                        dev->mdelay = T_50MSEC;
                                }
                        } else {
                                /* for cards which use slightly different
                                 * params (extra guard time) */
                                set_cardparameter(dev);
                                if (test_bit(IS_AUTOPPS_ACT, &dev->flags) == 1)
                                        DEBUGP(4, dev, "AUTOPPS already active "
                                               "2nd try:use default values\n");
                                if (dev->ta1 == 0x11)
                                        DEBUGP(4, dev, "No AUTOPPS necessary "
                                               "TA(1)==0x11\n");
                                if (test_bit(IS_ANY_T0, &dev->flags)
                                    && test_bit(IS_ANY_T1, &dev->flags))
                                        DEBUGP(4, dev, "Do NOT perform AUTOPPS "
                                               "with multiprotocol cards\n");
                                clear_bit(IS_AUTOPPS_ACT, &dev->flags);
                                wake_up_interruptible(&dev->atrq);
                        }
                } else {
                        DEBUGP(4, dev, "ATR invalid\n");
                        wake_up_interruptible(&dev->atrq);
                }
                break;
        case M_BAD_CARD:
                DEBUGP(4, dev, "M_BAD_CARD\n");
                /* slow down warning, but prompt immediately after insertion */
                if (dev->cwarn == 0 || dev->cwarn == 10) {
                        set_bit(IS_BAD_CARD, &dev->flags);
                        dev_warn(&dev->p_dev->dev, MODULE_NAME ": ");
                        if (test_bit(IS_BAD_CSUM, &dev->flags)) {
                                DEBUGP(4, dev, "ATR checksum (0x%.2x, should "
                                       "be zero) failed\n", dev->atr_csum);
                        }
#ifdef CM4000_DEBUG
                        else if (test_bit(IS_BAD_LENGTH, &dev->flags)) {
                                DEBUGP(4, dev, "ATR length error\n");
                        } else {
                                DEBUGP(4, dev, "card damaged or wrong way "
                                        "inserted\n");
                        }
#endif
                        dev->cwarn = 0;
                        wake_up_interruptible(&dev->atrq);      /* wake open */
                }
                dev->cwarn++;
                dev->mdelay = T_100MSEC;
                dev->mstate = M_FETCH_ATR;
                break;
        default:
                DEBUGP(7, dev, "Unknown action\n");
                break;          /* nothing */
        }

release_io:
        DEBUGP(7, dev, "release_io\n");
        clear_bit(LOCK_IO, &dev->flags);
        wake_up_interruptible(&dev->ioq);       /* whoever needs IO */

return_with_timer:
        DEBUGP(7, dev, "<- monitor_card (returns with timer)\n");
        mod_timer(&dev->timer, jiffies + dev->mdelay);
        clear_bit(LOCK_MONITOR, &dev->flags);
}

/* Interface to userland (file_operations) */

static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count,
                        loff_t *ppos)
{
        struct cm4000_dev *dev = filp->private_data;
        unsigned int iobase = dev->p_dev->resource[0]->start;
        ssize_t rc;
        int i, j, k;

        DEBUGP(2, dev, "-> cmm_read(%s,%d)\n", current->comm, current->pid);

        if (count == 0)         /* according to manpage */
                return 0;

        if (!pcmcia_dev_present(dev->p_dev) || /* device removed */
            test_bit(IS_CMM_ABSENT, &dev->flags))
                return -ENODEV;

        if (test_bit(IS_BAD_CSUM, &dev->flags))
                return -EIO;

        /* also see the note about this in cmm_write */
        if (wait_event_interruptible
            (dev->atrq,
             ((filp->f_flags & O_NONBLOCK)
              || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) {
                if (filp->f_flags & O_NONBLOCK)
                        return -EAGAIN;
                return -ERESTARTSYS;
        }

        if (test_bit(IS_ATR_VALID, &dev->flags) == 0)
                return -EIO;

        /* this one implements blocking IO */
        if (wait_event_interruptible
            (dev->readq,
             ((filp->f_flags & O_NONBLOCK) || (dev->rpos < dev->rlen)))) {
                if (filp->f_flags & O_NONBLOCK)
                        return -EAGAIN;
                return -ERESTARTSYS;
        }

        /* lock io */
        if (wait_event_interruptible
            (dev->ioq,
             ((filp->f_flags & O_NONBLOCK)
              || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) {
                if (filp->f_flags & O_NONBLOCK)
                        return -EAGAIN;
                return -ERESTARTSYS;
        }

        rc = 0;
        dev->flags0 = inb(REG_FLAGS0(iobase));
        if ((dev->flags0 & 1) == 0      /* no smartcard inserted */
            || dev->flags0 == 0xff) {   /* no cardman inserted */
                clear_bit(IS_ATR_VALID, &dev->flags);
                if (dev->flags0 & 1) {
                        set_bit(IS_CMM_ABSENT, &dev->flags);
                        rc = -ENODEV;
                } else {
                        rc = -EIO;
                }
                goto release_io;
        }

        DEBUGP(4, dev, "begin read answer\n");
        j = min(count, (size_t)(dev->rlen - dev->rpos));
        k = dev->rpos;
        if (k + j > 255)
                j = 256 - k;
        DEBUGP(4, dev, "read1 j=%d\n", j);
        for (i = 0; i < j; i++) {
                xoutb(k++, REG_BUF_ADDR(iobase));
                dev->rbuf[i] = xinb(REG_BUF_DATA(iobase));
        }
        j = min(count, (size_t)(dev->rlen - dev->rpos));
        if (k + j > 255) {
                DEBUGP(4, dev, "read2 j=%d\n", j);
                dev->flags1 |= 0x10;    /* MSB buf addr set */

                xoutb(dev->flags1, REG_FLAGS1(iobase));
                for (; i < j; i++) {
                        xoutb(k++, REG_BUF_ADDR(iobase));
                        dev->rbuf[i] = xinb(REG_BUF_DATA(iobase));
                }
        }

        if (dev->proto == 0 && count > dev->rlen - dev->rpos && i) {
                DEBUGP(4, dev, "T=0 and count > buffer\n");
                dev->rbuf[i] = dev->rbuf[i - 1];
                dev->rbuf[i - 1] = dev->procbyte;
                j++;
        }
        count = j;

        dev->rpos = dev->rlen + 1;

        /* Clear T1Active */
        DEBUGP(4, dev, "Clear T1Active\n");
        dev->flags1 &= 0xdf;
        xoutb(dev->flags1, REG_FLAGS1(iobase));

        xoutb(0, REG_FLAGS1(iobase));   /* clear detectCMM */
        /* last check before exit */
        if (!io_detect_cm4000(iobase, dev)) {
                rc = -ENODEV;
                goto release_io;
        }

        if (test_bit(IS_INVREV, &dev->flags) && count > 0)
                str_invert_revert(dev->rbuf, count);

        if (copy_to_user(buf, dev->rbuf, count))
                rc = -EFAULT;

release_io:
        clear_bit(LOCK_IO, &dev->flags);
        wake_up_interruptible(&dev->ioq);

        DEBUGP(2, dev, "<- cmm_read returns: rc = %Zi\n",
               (rc < 0 ? rc : count));
        return rc < 0 ? rc : count;
}

static ssize_t cmm_write(struct file *filp, const char __user *buf,
                         size_t count, loff_t *ppos)
{
        struct cm4000_dev *dev = filp->private_data;
        unsigned int iobase = dev->p_dev->resource[0]->start;
        unsigned short s;
        unsigned char tmp;
        unsigned char infolen;
        unsigned char sendT0;
        unsigned short nsend;
        unsigned short nr;
        ssize_t rc;
        int i;

        DEBUGP(2, dev, "-> cmm_write(%s,%d)\n", current->comm, current->pid);

        if (count == 0)         /* according to manpage */
                return 0;

        if (dev->proto == 0 && count < 4) {
                /* T0 must have at least 4 bytes */
                DEBUGP(4, dev, "T0 short write\n");
                return -EIO;
        }

        nr = count & 0x1ff;     /* max bytes to write */

        sendT0 = dev->proto ? 0 : nr > 5 ? 0x08 : 0;

        if (!pcmcia_dev_present(dev->p_dev) || /* device removed */
            test_bit(IS_CMM_ABSENT, &dev->flags))
                return -ENODEV;

        if (test_bit(IS_BAD_CSUM, &dev->flags)) {
                DEBUGP(4, dev, "bad csum\n");
                return -EIO;
        }

        /*
         * wait for atr to become valid.
         * note: it is important to lock this code. if we dont, the monitor
         * could be run between test_bit and the call to sleep on the
         * atr-queue.  if *then* the monitor detects atr valid, it will wake up
         * any process on the atr-queue, *but* since we have been interrupted,
         * we do not yet sleep on this queue. this would result in a missed
         * wake_up and the calling process would sleep forever (until
         * interrupted).  also, do *not* restore_flags before sleep_on, because
         * this could result in the same situation!
         */
        if (wait_event_interruptible
            (dev->atrq,
             ((filp->f_flags & O_NONBLOCK)
              || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) {
                if (filp->f_flags & O_NONBLOCK)
                        return -EAGAIN;
                return -ERESTARTSYS;
        }

        if (test_bit(IS_ATR_VALID, &dev->flags) == 0) { /* invalid atr */
                DEBUGP(4, dev, "invalid ATR\n");
                return -EIO;
        }

        /* lock io */
        if (wait_event_interruptible
            (dev->ioq,
             ((filp->f_flags & O_NONBLOCK)
              || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) {
                if (filp->f_flags & O_NONBLOCK)
                        return -EAGAIN;
                return -ERESTARTSYS;
        }

        if (copy_from_user(dev->sbuf, buf, ((count > 512) ? 512 : count)))
                return -EFAULT;

        rc = 0;
        dev->flags0 = inb(REG_FLAGS0(iobase));
        if ((dev->flags0 & 1) == 0      /* no smartcard inserted */
            || dev->flags0 == 0xff) {   /* no cardman inserted */
                clear_bit(IS_ATR_VALID, &dev->flags);
                if (dev->flags0 & 1) {
                        set_bit(IS_CMM_ABSENT, &dev->flags);
                        rc = -ENODEV;
                } else {
                        DEBUGP(4, dev, "IO error\n");
                        rc = -EIO;
                }
                goto release_io;
        }

        xoutb(0x80, REG_FLAGS0(iobase));        /* reset SM  */

        if (!io_detect_cm4000(iobase, dev)) {
                rc = -ENODEV;
                goto release_io;
        }

        /* reflect T=0 send/read mode in flags1 */
        dev->flags1 |= (sendT0);

        set_cardparameter(dev);

        /* dummy read, reset flag procedure received */
        tmp = inb(REG_FLAGS1(iobase));

        dev->flags1 = 0x20      /* T_Active */
            | (sendT0)
            | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0)/* inverse parity  */
            | (((dev->baudv - 1) & 0x0100) >> 8);       /* MSB-Baud */
        DEBUGP(1, dev, "set dev->flags1 = 0x%.2x\n", dev->flags1);
        xoutb(dev->flags1, REG_FLAGS1(iobase));

        /* xmit data */
        DEBUGP(4, dev, "Xmit data\n");
        for (i = 0; i < nr; i++) {
                if (i >= 256) {
                        dev->flags1 = 0x20      /* T_Active */
                            | (sendT0)  /* SendT0 */
                                /* inverse parity: */
                            | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0)
                            | (((dev->baudv - 1) & 0x0100) >> 8) /* MSB-Baud */
                            | 0x10;     /* set address high */
                        DEBUGP(4, dev, "dev->flags = 0x%.2x - set address "
                               "high\n", dev->flags1);
                        xoutb(dev->flags1, REG_FLAGS1(iobase));
                }
                if (test_bit(IS_INVREV, &dev->flags)) {
                        DEBUGP(4, dev, "Apply inverse convention for 0x%.2x "
                                "-> 0x%.2x\n", (unsigned char)dev->sbuf[i],
                              invert_revert(dev->sbuf[i]));
                        xoutb(i, REG_BUF_ADDR(iobase));
                        xoutb(invert_revert(dev->sbuf[i]),
                              REG_BUF_DATA(iobase));
                } else {
                        xoutb(i, REG_BUF_ADDR(iobase));
                        xoutb(dev->sbuf[i], REG_BUF_DATA(iobase));
                }
        }
        DEBUGP(4, dev, "Xmit done\n");

        if (dev->proto == 0) {
                /* T=0 proto: 0 byte reply  */
                if (nr == 4) {
                        DEBUGP(4, dev, "T=0 assumes 0 byte reply\n");
                        xoutb(i, REG_BUF_ADDR(iobase));
                        if (test_bit(IS_INVREV, &dev->flags))
                                xoutb(0xff, REG_BUF_DATA(iobase));
                        else
                                xoutb(0x00, REG_BUF_DATA(iobase));
                }

                /* numSendBytes */
                if (sendT0)
                        nsend = nr;
                else {
                        if (nr == 4)
                                nsend = 5;
                        else {
                                nsend = 5 + (unsigned char)dev->sbuf[4];
                                if (dev->sbuf[4] == 0)
                                        nsend += 0x100;
                        }
                }
        } else
                nsend = nr;

        /* T0: output procedure byte */
        if (test_bit(IS_INVREV, &dev->flags)) {
                DEBUGP(4, dev, "T=0 set Procedure byte (inverse-reverse) "
                       "0x%.2x\n", invert_revert(dev->sbuf[1]));
                xoutb(invert_revert(dev->sbuf[1]), REG_NUM_BYTES(iobase));
        } else {
                DEBUGP(4, dev, "T=0 set Procedure byte 0x%.2x\n", dev->sbuf[1]);
                xoutb(dev->sbuf[1], REG_NUM_BYTES(iobase));
        }

        DEBUGP(1, dev, "set NumSendBytes = 0x%.2x\n",
               (unsigned char)(nsend & 0xff));
        xoutb((unsigned char)(nsend & 0xff), REG_NUM_SEND(iobase));

        DEBUGP(1, dev, "Trigger CARDMAN CONTROLLER (0x%.2x)\n",
               0x40     /* SM_Active */
              | (dev->flags0 & 2 ? 0 : 4)       /* power on if needed */
              |(dev->proto ? 0x10 : 0x08)       /* T=1/T=0 */
              |(nsend & 0x100) >> 8 /* MSB numSendBytes */ );
        xoutb(0x40              /* SM_Active */
              | (dev->flags0 & 2 ? 0 : 4)       /* power on if needed */
              |(dev->proto ? 0x10 : 0x08)       /* T=1/T=0 */
              |(nsend & 0x100) >> 8,    /* MSB numSendBytes */
              REG_FLAGS0(iobase));

        /* wait for xmit done */
        if (dev->proto == 1) {
                DEBUGP(4, dev, "Wait for xmit done\n");
                for (i = 0; i < 1000; i++) {
                        if (inb(REG_FLAGS0(iobase)) & 0x08)
                                break;
                        msleep_interruptible(10);
                }
                if (i == 1000) {
                        DEBUGP(4, dev, "timeout waiting for xmit done\n");
                        rc = -EIO;
                        goto release_io;
                }
        }

        /* T=1: wait for infoLen */

        infolen = 0;
        if (dev->proto) {
                /* wait until infoLen is valid */
                for (i = 0; i < 6000; i++) {    /* max waiting time of 1 min */
                        io_read_num_rec_bytes(iobase, &s);
                        if (s >= 3) {
                                infolen = inb(REG_FLAGS1(iobase));
                                DEBUGP(4, dev, "infolen=%d\n", infolen);
                                break;
                        }
                        msleep_interruptible(10);
                }
                if (i == 6000) {
                        DEBUGP(4, dev, "timeout waiting for infoLen\n");
                        rc = -EIO;
                        goto release_io;
                }
        } else
                clear_bit(IS_PROCBYTE_PRESENT, &dev->flags);

        /* numRecBytes | bit9 of numRecytes */
        io_read_num_rec_bytes(iobase, &dev->rlen);
        for (i = 0; i < 600; i++) {     /* max waiting time of 2 sec */
                if (dev->proto) {
                        if (dev->rlen >= infolen + 4)
                                break;
                }
                msleep_interruptible(10);
                /* numRecBytes | bit9 of numRecytes */
                io_read_num_rec_bytes(iobase, &s);
                if (s > dev->rlen) {
                        DEBUGP(1, dev, "NumRecBytes inc (reset timeout)\n");
                        i = 0;  /* reset timeout */
                        dev->rlen = s;
                }
                /* T=0: we are done when numRecBytes doesn't
                 *      increment any more and NoProcedureByte
                 *      is set and numRecBytes == bytes sent + 6
                 *      (header bytes + data + 1 for sw2)
                 *      except when the card replies an error
                 *      which means, no data will be sent back.
                 */
                else if (dev->proto == 0) {
                        if ((inb(REG_BUF_ADDR(iobase)) & 0x80)) {
                                /* no procedure byte received since last read */
                                DEBUGP(1, dev, "NoProcedure byte set\n");
                                /* i=0; */
                        } else {
                                /* procedure byte received since last read */
                                DEBUGP(1, dev, "NoProcedure byte unset "
                                        "(reset timeout)\n");
                                dev->procbyte = inb(REG_FLAGS1(iobase));
                                DEBUGP(1, dev, "Read procedure byte 0x%.2x\n",
                                      dev->procbyte);
                                i = 0;  /* resettimeout */
                        }
                        if (inb(REG_FLAGS0(iobase)) & 0x08) {
                                DEBUGP(1, dev, "T0Done flag (read reply)\n");
                                break;
                        }
                }
                if (dev->proto)
                        infolen = inb(REG_FLAGS1(iobase));
        }
        if (i == 600) {
                DEBUGP(1, dev, "timeout waiting for numRecBytes\n");
                rc = -EIO;
                goto release_io;
        } else {
                if (dev->proto == 0) {
                        DEBUGP(1, dev, "Wait for T0Done bit to be  set\n");
                        for (i = 0; i < 1000; i++) {
                                if (inb(REG_FLAGS0(iobase)) & 0x08)
                                        break;
                                msleep_interruptible(10);
                        }
                        if (i == 1000) {
                                DEBUGP(1, dev, "timeout waiting for T0Done\n");
                                rc = -EIO;
                                goto release_io;
                        }

                        dev->procbyte = inb(REG_FLAGS1(iobase));
                        DEBUGP(4, dev, "Read procedure byte 0x%.2x\n",
                              dev->procbyte);

                        io_read_num_rec_bytes(iobase, &dev->rlen);
                        DEBUGP(4, dev, "Read NumRecBytes = %i\n", dev->rlen);

                }
        }
        /* T=1: read offset=zero, T=0: read offset=after challenge */
        dev->rpos = dev->proto ? 0 : nr == 4 ? 5 : nr > dev->rlen ? 5 : nr;
        DEBUGP(4, dev, "dev->rlen = %i,  dev->rpos = %i, nr = %i\n",
              dev->rlen, dev->rpos, nr);

release_io:
        DEBUGP(4, dev, "Reset SM\n");
        xoutb(0x80, REG_FLAGS0(iobase));        /* reset SM */

        if (rc < 0) {
                DEBUGP(4, dev, "Write failed but clear T_Active\n");
                dev->flags1 &= 0xdf;
                xoutb(dev->flags1, REG_FLAGS1(iobase));
        }

        clear_bit(LOCK_IO, &dev->flags);
        wake_up_interruptible(&dev->ioq);
        wake_up_interruptible(&dev->readq);     /* tell read we have data */

        /* ITSEC E2: clear write buffer */
        memset((char *)dev->sbuf, 0, 512);

        /* return error or actually written bytes */
        DEBUGP(2, dev, "<- cmm_write\n");
        return rc < 0 ? rc : nr;
}

static void start_monitor(struct cm4000_dev *dev)
{
        DEBUGP(3, dev, "-> start_monitor\n");
        if (!dev->monitor_running) {
                DEBUGP(5, dev, "create, init and add timer\n");
                setup_timer(&dev->timer, monitor_card, (unsigned long)dev);
                dev->monitor_running = 1;
                mod_timer(&dev->timer, jiffies);
        } else
                DEBUGP(5, dev, "monitor already running\n");
        DEBUGP(3, dev, "<- start_monitor\n");
}

static void stop_monitor(struct cm4000_dev *dev)
{
        DEBUGP(3, dev, "-> stop_monitor\n");
        if (dev->monitor_running) {
                DEBUGP(5, dev, "stopping monitor\n");
                terminate_monitor(dev);
                /* reset monitor SM */
                clear_bit(IS_ATR_VALID, &dev->flags);
                clear_bit(IS_ATR_PRESENT, &dev->flags);
        } else
                DEBUGP(5, dev, "monitor already stopped\n");
        DEBUGP(3, dev, "<- stop_monitor\n");
}

static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
        struct cm4000_dev *dev = filp->private_data;
        unsigned int iobase = dev->p_dev->resource[0]->start;
        struct inode *inode = filp->f_path.dentry->d_inode;
        struct pcmcia_device *link;
        int size;
        int rc;
        void __user *argp = (void __user *)arg;
#ifdef CM4000_DEBUG
        char *ioctl_names[CM_IOC_MAXNR + 1] = {
                [_IOC_NR(CM_IOCGSTATUS)] "CM_IOCGSTATUS",
                [_IOC_NR(CM_IOCGATR)] "CM_IOCGATR",
                [_IOC_NR(CM_IOCARDOFF)] "CM_IOCARDOFF",
                [_IOC_NR(CM_IOCSPTS)] "CM_IOCSPTS",
                [_IOC_NR(CM_IOSDBGLVL)] "CM4000_DBGLVL",
        };
        DEBUGP(3, dev, "cmm_ioctl(device=%d.%d) %s\n", imajor(inode),
               iminor(inode), ioctl_names[_IOC_NR(cmd)]);
#endif

        mutex_lock(&cmm_mutex);
        rc = -ENODEV;
        link = dev_table[iminor(inode)];
        if (!pcmcia_dev_present(link)) {
                DEBUGP(4, dev, "DEV_OK false\n");
                goto out;
        }

        if (test_bit(IS_CMM_ABSENT, &dev->flags)) {
                DEBUGP(4, dev, "CMM_ABSENT flag set\n");
                goto out;
        }
        rc = -EINVAL;

        if (_IOC_TYPE(cmd) != CM_IOC_MAGIC) {
                DEBUGP(4, dev, "ioctype mismatch\n");
                goto out;
        }
        if (_IOC_NR(cmd) > CM_IOC_MAXNR) {
                DEBUGP(4, dev, "iocnr mismatch\n");
                goto out;
        }
        size = _IOC_SIZE(cmd);
        rc = -EFAULT;
        DEBUGP(4, dev, "iocdir=%.4x iocr=%.4x iocw=%.4x iocsize=%d cmd=%.4x\n",
              _IOC_DIR(cmd), _IOC_READ, _IOC_WRITE, size, cmd);

        if (_IOC_DIR(cmd) & _IOC_READ) {
                if (!access_ok(VERIFY_WRITE, argp, size))
                        goto out;
        }
        if (_IOC_DIR(cmd) & _IOC_WRITE) {
                if (!access_ok(VERIFY_READ, argp, size))
                        goto out;
        }
        rc = 0;

        switch (cmd) {
        case CM_IOCGSTATUS:
                DEBUGP(4, dev, " ... in CM_IOCGSTATUS\n");
                {
                        int status;

                        /* clear other bits, but leave inserted & powered as
                         * they are */
                        status = dev->flags0 & 3;
                        if (test_bit(IS_ATR_PRESENT, &dev->flags))
                                status |= CM_ATR_PRESENT;
                        if (test_bit(IS_ATR_VALID, &dev->flags))
                                status |= CM_ATR_VALID;
                        if (test_bit(IS_CMM_ABSENT, &dev->flags))
                                status |= CM_NO_READER;
                        if (test_bit(IS_BAD_CARD, &dev->flags))
                                status |= CM_BAD_CARD;
                        if (copy_to_user(argp, &status, sizeof(int)))
                                rc = -EFAULT;
                }
                break;
        case CM_IOCGATR:
                DEBUGP(4, dev, "... in CM_IOCGATR\n");
                {
                        struct atreq __user *atreq = argp;
                        int tmp;
                        /* allow nonblocking io and being interrupted */
                        if (wait_event_interruptible
                            (dev->atrq,
                             ((filp->f_flags & O_NONBLOCK)
                              || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags)
                                  != 0)))) {
                                if (filp->f_flags & O_NONBLOCK)
                                        rc = -EAGAIN;
                                else
                                        rc = -ERESTARTSYS;
                                break;
                        }

                        rc = -EFAULT;
                        if (test_bit(IS_ATR_VALID, &dev->flags) == 0) {
                                tmp = -1;
                                if (copy_to_user(&(atreq->atr_len), &tmp,
                                                 sizeof(int)))
                                        break;
                        } else {
                                if (copy_to_user(atreq->atr, dev->atr,
                                                 dev->atr_len))
                                        break;

                                tmp = dev->atr_len;
                                if (copy_to_user(&(atreq->atr_len), &tmp, sizeof(int)))
                                        break;
                        }
                        rc = 0;
                        break;
                }
        case CM_IOCARDOFF:

#ifdef CM4000_DEBUG
                DEBUGP(4, dev, "... in CM_IOCARDOFF\n");
                if (dev->flags0 & 0x01) {
                        DEBUGP(4, dev, "    Card inserted\n");
                } else {
                        DEBUGP(2, dev, "    No card inserted\n");
                }
                if (dev->flags0 & 0x02) {
                        DEBUGP(4, dev, "    Card powered\n");
                } else {
                        DEBUGP(2, dev, "    Card not powered\n");
                }
#endif

                /* is a card inserted and powered? */
                if ((dev->flags0 & 0x01) && (dev->flags0 & 0x02)) {

                        /* get IO lock */
                        if (wait_event_interruptible
                            (dev->ioq,
                             ((filp->f_flags & O_NONBLOCK)
                              || (test_and_set_bit(LOCK_IO, (void *)&dev->flags)
                                  == 0)))) {
                                if (filp->f_flags & O_NONBLOCK)
                                        rc = -EAGAIN;
                                else
                                        rc = -ERESTARTSYS;
                                break;
                        }
                        /* Set Flags0 = 0x42 */
                        DEBUGP(4, dev, "Set Flags0=0x42 \n");
                        xoutb(0x42, REG_FLAGS0(iobase));
                        clear_bit(IS_ATR_PRESENT, &dev->flags);
                        clear_bit(IS_ATR_VALID, &dev->flags);
                        dev->mstate = M_CARDOFF;
                        clear_bit(LOCK_IO, &dev->flags);
                        if (wait_event_interruptible
                            (dev->atrq,
                             ((filp->f_flags & O_NONBLOCK)
                              || (test_bit(IS_ATR_VALID, (void *)&dev->flags) !=
                                  0)))) {
                                if (filp->f_flags & O_NONBLOCK)
                                        rc = -EAGAIN;
                                else
                                        rc = -ERESTARTSYS;
                                break;
                        }
                }
                /* release lock */
                clear_bit(LOCK_IO, &dev->flags);
                wake_up_interruptible(&dev->ioq);

                rc = 0;
                break;
        case CM_IOCSPTS:
                {
                        struct ptsreq krnptsreq;

                        if (copy_from_user(&krnptsreq, argp,
                                           sizeof(struct ptsreq))) {
                                rc = -EFAULT;
                                break;
                        }

                        rc = 0;
                        DEBUGP(4, dev, "... in CM_IOCSPTS\n");
                        /* wait for ATR to get valid */
                        if (wait_event_interruptible
                            (dev->atrq,
                             ((filp->f_flags & O_NONBLOCK)
                              || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags)
                                  != 0)))) {
                                if (filp->f_flags & O_NONBLOCK)
                                        rc = -EAGAIN;
                                else
                                        rc = -ERESTARTSYS;
                                break;
                        }
                        /* get IO lock */
                        if (wait_event_interruptible
                            (dev->ioq,
                             ((filp->f_flags & O_NONBLOCK)
                              || (test_and_set_bit(LOCK_IO, (void *)&dev->flags)
                                  == 0)))) {
                                if (filp->f_flags & O_NONBLOCK)
                                        rc = -EAGAIN;
                                else
                                        rc = -ERESTARTSYS;
                                break;
                        }

                        if ((rc = set_protocol(dev, &krnptsreq)) != 0) {
                                /* auto power_on again */
                                dev->mstate = M_FETCH_ATR;
                                clear_bit(IS_ATR_VALID, &dev->flags);
                        }
                        /* release lock */
                        clear_bit(LOCK_IO, &dev->flags);
                        wake_up_interruptible(&dev->ioq);

                }
                break;
#ifdef CM4000_DEBUG
        case CM_IOSDBGLVL:
                rc = -ENOTTY;
                break;
#endif
        default:
                DEBUGP(4, dev, "... in default (unknown IOCTL code)\n");
                rc = -ENOTTY;
        }
out:
        mutex_unlock(&cmm_mutex);
        return rc;
}

static int cmm_open(struct inode *inode, struct file *filp)
{
        struct cm4000_dev *dev;
        struct pcmcia_device *link;
        int minor = iminor(inode);
        int ret;

        if (minor >= CM4000_MAX_DEV)
                return -ENODEV;

        mutex_lock(&cmm_mutex);
        link = dev_table[minor];
        if (link == NULL || !pcmcia_dev_present(link)) {
                ret = -ENODEV;
                goto out;
        }

        if (link->open) {
                ret = -EBUSY;
                goto out;
        }

        dev = link->priv;
        filp->private_data = dev;

        DEBUGP(2, dev, "-> cmm_open(device=%d.%d process=%s,%d)\n",
              imajor(inode), minor, current->comm, current->pid);

        /* init device variables, they may be "polluted" after close
         * or, the device may never have been closed (i.e. open failed)
         */

        ZERO_DEV(dev);

        /* opening will always block since the
         * monitor will be started by open, which
         * means we have to wait for ATR becoming
         * valid = block until valid (or card
         * inserted)
         */
        if (filp->f_flags & O_NONBLOCK) {
                ret = -EAGAIN;
                goto out;
        }

        dev->mdelay = T_50MSEC;

        /* start monitoring the cardstatus */
        start_monitor(dev);

        link->open = 1;         /* only one open per device */

        DEBUGP(2, dev, "<- cmm_open\n");
        ret = nonseekable_open(inode, filp);
out:
        mutex_unlock(&cmm_mutex);
        return ret;
}

static int cmm_close(struct inode *inode, struct file *filp)
{
        struct cm4000_dev *dev;
        struct pcmcia_device *link;
        int minor = iminor(inode);

        if (minor >= CM4000_MAX_DEV)
                return -ENODEV;

        link = dev_table[minor];
        if (link == NULL)
                return -ENODEV;

        dev = link->priv;

        DEBUGP(2, dev, "-> cmm_close(maj/min=%d.%d)\n",
               imajor(inode), minor);

        stop_monitor(dev);

        ZERO_DEV(dev);

        link->open = 0;         /* only one open per device */
        wake_up(&dev->devq);    /* socket removed? */

        DEBUGP(2, dev, "cmm_close\n");
        return 0;
}

static void cmm_cm4000_release(struct pcmcia_device * link)
{
        struct cm4000_dev *dev = link->priv;

        /* dont terminate the monitor, rather rely on
         * close doing that for us.
         */
        DEBUGP(3, dev, "-> cmm_cm4000_release\n");
        while (link->open) {
                printk(KERN_INFO MODULE_NAME ": delaying release until "
                       "process has terminated\n");
                /* note: don't interrupt us:
                 * close the applications which own
                 * the devices _first_ !
                 */
                wait_event(dev->devq, (link->open == 0));
        }
        /* dev->devq=NULL;      this cannot be zeroed earlier */
        DEBUGP(3, dev, "<- cmm_cm4000_release\n");
        return;
}

/*==== Interface to PCMCIA Layer =======================================*/

static int cm4000_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
        return pcmcia_request_io(p_dev);
}

static int cm4000_config(struct pcmcia_device * link, int devno)
{
        struct cm4000_dev *dev;

        link->config_flags |= CONF_AUTO_SET_IO;

        /* read the config-tuples */
        if (pcmcia_loop_config(link, cm4000_config_check, NULL))
                goto cs_release;

        if (pcmcia_enable_device(link))
                goto cs_release;

        dev = link->priv;

        return 0;

cs_release:
        cm4000_release(link);
        return -ENODEV;
}

static int cm4000_suspend(struct pcmcia_device *link)
{
        struct cm4000_dev *dev;

        dev = link->priv;
        stop_monitor(dev);

        return 0;
}

static int cm4000_resume(struct pcmcia_device *link)
{
        struct cm4000_dev *dev;

        dev = link->priv;
        if (link->open)
                start_monitor(dev);

        return 0;
}

static void cm4000_release(struct pcmcia_device *link)
{
        cmm_cm4000_release(link);       /* delay release until device closed */
        pcmcia_disable_device(link);
}

static int cm4000_probe(struct pcmcia_device *link)
{
        struct cm4000_dev *dev;
        int i, ret;

        for (i = 0; i < CM4000_MAX_DEV; i++)
                if (dev_table[i] == NULL)
                        break;

        if (i == CM4000_MAX_DEV) {
                printk(KERN_NOTICE MODULE_NAME ": all devices in use\n");
                return -ENODEV;
        }

        /* create a new cm4000_cs device */
        dev = kzalloc(sizeof(struct cm4000_dev), GFP_KERNEL);
        if (dev == NULL)
                return -ENOMEM;

        dev->p_dev = link;
        link->priv = dev;
        dev_table[i] = link;

        init_waitqueue_head(&dev->devq);
        init_waitqueue_head(&dev->ioq);
        init_waitqueue_head(&dev->atrq);
        init_waitqueue_head(&dev->readq);

        ret = cm4000_config(link, i);
        if (ret) {
                dev_table[i] = NULL;
                kfree(dev);
                return ret;
        }

        device_create(cmm_class, NULL, MKDEV(major, i), NULL, "cmm%d", i);

        return 0;
}

static void cm4000_detach(struct pcmcia_device *link)
{
        struct cm4000_dev *dev = link->priv;
        int devno;

        /* find device */
        for (devno = 0; devno < CM4000_MAX_DEV; devno++)
                if (dev_table[devno] == link)
                        break;
        if (devno == CM4000_MAX_DEV)
                return;

        stop_monitor(dev);

        cm4000_release(link);

        dev_table[devno] = NULL;
        kfree(dev);

        device_destroy(cmm_class, MKDEV(major, devno));

        return;
}

static const struct file_operations cm4000_fops = {
        .owner  = THIS_MODULE,
        .read   = cmm_read,
        .write  = cmm_write,
        .unlocked_ioctl = cmm_ioctl,
        .open   = cmm_open,
        .release= cmm_close,
        .llseek = no_llseek,
};

static struct pcmcia_device_id cm4000_ids[] = {
        PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0002),
        PCMCIA_DEVICE_PROD_ID12("CardMan", "4000", 0x2FB368CA, 0xA2BD8C39),
        PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, cm4000_ids);

static struct pcmcia_driver cm4000_driver = {
        .owner    = THIS_MODULE,
        .name     = "cm4000_cs",
        .probe    = cm4000_probe,
        .remove   = cm4000_detach,
        .suspend  = cm4000_suspend,
        .resume   = cm4000_resume,
        .id_table = cm4000_ids,
};

static int __init cmm_init(void)
{
        int rc;

        cmm_class = class_create(THIS_MODULE, "cardman_4000");
        if (IS_ERR(cmm_class))
                return PTR_ERR(cmm_class);

        major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
        if (major < 0) {
                printk(KERN_WARNING MODULE_NAME
                        ": could not get major number\n");
                class_destroy(cmm_class);
                return major;
        }

        rc = pcmcia_register_driver(&cm4000_driver);
        if (rc < 0) {
                unregister_chrdev(major, DEVICE_NAME);
                class_destroy(cmm_class);
                return rc;
        }

        return 0;
}

static void __exit cmm_exit(void)
{
        pcmcia_unregister_driver(&cm4000_driver);
        unregister_chrdev(major, DEVICE_NAME);
        class_destroy(cmm_class);
};

module_init(cmm_init);
module_exit(cmm_exit);
MODULE_LICENSE("Dual BSD/GPL");