linux/drivers/media/common/saa7146_hlp.c
<<
>>
Prefs
   1#include <linux/kernel.h>
   2#include <media/saa7146_vv.h>
   3
   4static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
   5{
   6        /* clear out the necessary bits */
   7        *clip_format &= 0x0000ffff;
   8        /* set these bits new */
   9        *clip_format |=  (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
  10}
  11
  12static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
  13{
  14        *hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
  15        *hps_ctrl |= (source << 30) | (sync << 28);
  16}
  17
  18static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
  19{
  20        int hyo = 0, hxo = 0;
  21
  22        hyo = vv->standard->v_offset;
  23        hxo = vv->standard->h_offset;
  24
  25        *hps_h_scale    &= ~(MASK_B0 | 0xf00);
  26        *hps_h_scale    |= (hxo <<  0);
  27
  28        *hps_ctrl       &= ~(MASK_W0 | MASK_B2);
  29        *hps_ctrl       |= (hyo << 12);
  30}
  31
  32/* helper functions for the calculation of the horizontal- and vertical
  33   scaling registers, clip-format-register etc ...
  34   these functions take pointers to the (most-likely read-out
  35   original-values) and manipulate them according to the requested
  36   changes.
  37*/
  38
  39/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
  40static struct {
  41        u16 hps_coeff;
  42        u16 weight_sum;
  43} hps_h_coeff_tab [] = {
  44        {0x00,   2}, {0x02,   4}, {0x00,   4}, {0x06,   8}, {0x02,   8},
  45        {0x08,   8}, {0x00,   8}, {0x1E,  16}, {0x0E,   8}, {0x26,   8},
  46        {0x06,   8}, {0x42,   8}, {0x02,   8}, {0x80,   8}, {0x00,   8},
  47        {0xFE,  16}, {0xFE,   8}, {0x7E,   8}, {0x7E,   8}, {0x3E,   8},
  48        {0x3E,   8}, {0x1E,   8}, {0x1E,   8}, {0x0E,   8}, {0x0E,   8},
  49        {0x06,   8}, {0x06,   8}, {0x02,   8}, {0x02,   8}, {0x00,   8},
  50        {0x00,   8}, {0xFE,  16}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  51        {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  52        {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
  53        {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0x7E,   8},
  54        {0x7E,   8}, {0x3E,   8}, {0x3E,   8}, {0x1E,   8}, {0x1E,   8},
  55        {0x0E,   8}, {0x0E,   8}, {0x06,   8}, {0x06,   8}, {0x02,   8},
  56        {0x02,   8}, {0x00,   8}, {0x00,   8}, {0xFE,  16}
  57};
  58
  59/* table of attenuation values for horizontal scaling */
  60static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
  61
  62/* calculate horizontal scale registers */
  63static int calculate_h_scale_registers(struct saa7146_dev *dev,
  64        int in_x, int out_x, int flip_lr,
  65        u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
  66{
  67        /* horizontal prescaler */
  68        u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
  69        /* horizontal scaler */
  70        u32 xim = 0, xp = 0, xsci =0;
  71        /* vertical scale & gain */
  72        u32 pfuv = 0;
  73
  74        /* helper variables */
  75        u32 h_atten = 0, i = 0;
  76
  77        if ( 0 == out_x ) {
  78                return -EINVAL;
  79        }
  80
  81        /* mask out vanity-bit */
  82        *hps_ctrl &= ~MASK_29;
  83
  84        /* calculate prescale-(xspc)-value:     [n   .. 1/2) : 1
  85                                                [1/2 .. 1/3) : 2
  86                                                [1/3 .. 1/4) : 3
  87                                                ...             */
  88        if (in_x > out_x) {
  89                xpsc = in_x / out_x;
  90        }
  91        else {
  92                /* zooming */
  93                xpsc = 1;
  94        }
  95
  96        /* if flip_lr-bit is set, number of pixels after
  97           horizontal prescaling must be < 384 */
  98        if ( 0 != flip_lr ) {
  99
 100                /* set vanity bit */
 101                *hps_ctrl |= MASK_29;
 102
 103                while (in_x / xpsc >= 384 )
 104                        xpsc++;
 105        }
 106        /* if zooming is wanted, number of pixels after
 107           horizontal prescaling must be < 768 */
 108        else {
 109                while ( in_x / xpsc >= 768 )
 110                        xpsc++;
 111        }
 112
 113        /* maximum prescale is 64 (p.69) */
 114        if ( xpsc > 64 )
 115                xpsc = 64;
 116
 117        /* keep xacm clear*/
 118        xacm = 0;
 119
 120        /* set horizontal filter parameters (CXY = CXUV) */
 121        cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
 122        cxuv = cxy;
 123
 124        /* calculate and set horizontal fine scale (xsci) */
 125
 126        /* bypass the horizontal scaler ? */
 127        if ( (in_x == out_x) && ( 1 == xpsc ) )
 128                xsci = 0x400;
 129        else
 130                xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
 131
 132        /* set start phase for horizontal fine scale (xp) to 0 */
 133        xp = 0;
 134
 135        /* set xim, if we bypass the horizontal scaler */
 136        if ( 0x400 == xsci )
 137                xim = 1;
 138        else
 139                xim = 0;
 140
 141        /* if the prescaler is bypassed, enable horizontal
 142           accumulation mode (xacm) and clear dcgx */
 143        if( 1 == xpsc ) {
 144                xacm = 1;
 145                dcgx = 0;
 146        } else {
 147                xacm = 0;
 148                /* get best match in the table of attenuations
 149                   for horizontal scaling */
 150                h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
 151
 152                for (i = 0; h_attenuation[i] != 0; i++) {
 153                        if (h_attenuation[i] >= h_atten)
 154                                break;
 155                }
 156
 157                dcgx = i;
 158        }
 159
 160        /* the horizontal scaling increment controls the UV filter
 161           to reduce the bandwidth to improve the display quality,
 162           so set it ... */
 163        if ( xsci == 0x400)
 164                pfuv = 0x00;
 165        else if ( xsci < 0x600)
 166                pfuv = 0x01;
 167        else if ( xsci < 0x680)
 168                pfuv = 0x11;
 169        else if ( xsci < 0x700)
 170                pfuv = 0x22;
 171        else
 172                pfuv = 0x33;
 173
 174
 175        *hps_v_gain  &= MASK_W0|MASK_B2;
 176        *hps_v_gain  |= (pfuv << 24);
 177
 178        *hps_h_scale    &= ~(MASK_W1 | 0xf000);
 179        *hps_h_scale    |= (xim << 31) | (xp << 24) | (xsci << 12);
 180
 181        *hps_h_prescale |= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
 182
 183        return 0;
 184}
 185
 186static struct {
 187        u16 hps_coeff;
 188        u16 weight_sum;
 189} hps_v_coeff_tab [] = {
 190 {0x0100,   2},  {0x0102,   4},  {0x0300,   4},  {0x0106,   8},  {0x0502,   8},
 191 {0x0708,   8},  {0x0F00,   8},  {0x011E,  16},  {0x110E,  16},  {0x1926,  16},
 192 {0x3906,  16},  {0x3D42,  16},  {0x7D02,  16},  {0x7F80,  16},  {0xFF00,  16},
 193 {0x01FE,  32},  {0x01FE,  32},  {0x817E,  32},  {0x817E,  32},  {0xC13E,  32},
 194 {0xC13E,  32},  {0xE11E,  32},  {0xE11E,  32},  {0xF10E,  32},  {0xF10E,  32},
 195 {0xF906,  32},  {0xF906,  32},  {0xFD02,  32},  {0xFD02,  32},  {0xFF00,  32},
 196 {0xFF00,  32},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 197 {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 198 {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
 199 {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x817E,  64},
 200 {0x817E,  64},  {0xC13E,  64},  {0xC13E,  64},  {0xE11E,  64},  {0xE11E,  64},
 201 {0xF10E,  64},  {0xF10E,  64},  {0xF906,  64},  {0xF906,  64},  {0xFD02,  64},
 202 {0xFD02,  64},  {0xFF00,  64},  {0xFF00,  64},  {0x01FE, 128}
 203};
 204
 205/* table of attenuation values for vertical scaling */
 206static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
 207
 208/* calculate vertical scale registers */
 209static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
 210        int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
 211{
 212        int lpi = 0;
 213
 214        /* vertical scaling */
 215        u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
 216        /* vertical scale & gain */
 217        u32 dcgy = 0, cya_cyb = 0;
 218
 219        /* helper variables */
 220        u32 v_atten = 0, i = 0;
 221
 222        /* error, if vertical zooming */
 223        if ( in_y < out_y ) {
 224                return -EINVAL;
 225        }
 226
 227        /* linear phase interpolation may be used
 228           if scaling is between 1 and 1/2 (both fields used)
 229           or scaling is between 1/2 and 1/4 (if only one field is used) */
 230
 231        if (V4L2_FIELD_HAS_BOTH(field)) {
 232                if( 2*out_y >= in_y) {
 233                        lpi = 1;
 234                }
 235        } else if (field == V4L2_FIELD_TOP
 236                || field == V4L2_FIELD_ALTERNATE
 237                || field == V4L2_FIELD_BOTTOM) {
 238                if( 4*out_y >= in_y ) {
 239                        lpi = 1;
 240                }
 241                out_y *= 2;
 242        }
 243        if( 0 != lpi ) {
 244
 245                yacm = 0;
 246                yacl = 0;
 247                cya_cyb = 0x00ff;
 248
 249                /* calculate scaling increment */
 250                if ( in_y > out_y )
 251                        ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
 252                else
 253                        ysci = 0;
 254
 255                dcgy = 0;
 256
 257                /* calculate ype and ypo */
 258                ype = ysci / 16;
 259                ypo = ype + (ysci / 64);
 260
 261        } else {
 262                yacm = 1;
 263
 264                /* calculate scaling increment */
 265                ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
 266
 267                /* calculate ype and ypo */
 268                ypo = ype = ((ysci + 15) / 16);
 269
 270                /* the sequence length interval (yacl) has to be set according
 271                   to the prescale value, e.g.  [n   .. 1/2) : 0
 272                                                [1/2 .. 1/3) : 1
 273                                                [1/3 .. 1/4) : 2
 274                                                ... */
 275                if ( ysci < 512) {
 276                        yacl = 0;
 277                } else {
 278                        yacl = ( ysci / (1024 - ysci) );
 279                }
 280
 281                /* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
 282                cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
 283
 284                /* get best match in the table of attenuations for vertical scaling */
 285                v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
 286
 287                for (i = 0; v_attenuation[i] != 0; i++) {
 288                        if (v_attenuation[i] >= v_atten)
 289                                break;
 290                }
 291
 292                dcgy = i;
 293        }
 294
 295        /* ypo and ype swapped in spec ? */
 296        *hps_v_scale    |= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
 297
 298        *hps_v_gain     &= ~(MASK_W0|MASK_B2);
 299        *hps_v_gain     |= (dcgy << 16) | (cya_cyb << 0);
 300
 301        return 0;
 302}
 303
 304/* simple bubble-sort algorithm with duplicate elimination */
 305static int sort_and_eliminate(u32* values, int* count)
 306{
 307        int low = 0, high = 0, top = 0, temp = 0;
 308        int cur = 0, next = 0;
 309
 310        /* sanity checks */
 311        if( (0 > *count) || (NULL == values) ) {
 312                return -EINVAL;
 313        }
 314
 315        /* bubble sort the first @count items of the array @values */
 316        for( top = *count; top > 0; top--) {
 317                for( low = 0, high = 1; high < top; low++, high++) {
 318                        if( values[low] > values[high] ) {
 319                                temp = values[low];
 320                                values[low] = values[high];
 321                                values[high] = temp;
 322                        }
 323                }
 324        }
 325
 326        /* remove duplicate items */
 327        for( cur = 0, next = 1; next < *count; next++) {
 328                if( values[cur] != values[next])
 329                        values[++cur] = values[next];
 330        }
 331
 332        *count = cur + 1;
 333
 334        return 0;
 335}
 336
 337static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
 338        struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
 339{
 340        struct saa7146_vv *vv = dev->vv_data;
 341        __le32 *clipping = vv->d_clipping.cpu_addr;
 342
 343        int width = fh->ov.win.w.width;
 344        int height =  fh->ov.win.w.height;
 345        int clipcount = fh->ov.nclips;
 346
 347        u32 line_list[32];
 348        u32 pixel_list[32];
 349        int numdwords = 0;
 350
 351        int i = 0, j = 0;
 352        int cnt_line = 0, cnt_pixel = 0;
 353
 354        int x[32], y[32], w[32], h[32];
 355
 356        /* clear out memory */
 357        memset(&line_list[0],  0x00, sizeof(u32)*32);
 358        memset(&pixel_list[0], 0x00, sizeof(u32)*32);
 359        memset(clipping,  0x00, SAA7146_CLIPPING_MEM);
 360
 361        /* fill the line and pixel-lists */
 362        for(i = 0; i < clipcount; i++) {
 363                int l = 0, r = 0, t = 0, b = 0;
 364
 365                x[i] = fh->ov.clips[i].c.left;
 366                y[i] = fh->ov.clips[i].c.top;
 367                w[i] = fh->ov.clips[i].c.width;
 368                h[i] = fh->ov.clips[i].c.height;
 369
 370                if( w[i] < 0) {
 371                        x[i] += w[i]; w[i] = -w[i];
 372                }
 373                if( h[i] < 0) {
 374                        y[i] += h[i]; h[i] = -h[i];
 375                }
 376                if( x[i] < 0) {
 377                        w[i] += x[i]; x[i] = 0;
 378                }
 379                if( y[i] < 0) {
 380                        h[i] += y[i]; y[i] = 0;
 381                }
 382                if( 0 != vv->vflip ) {
 383                        y[i] = height - y[i] - h[i];
 384                }
 385
 386                l = x[i];
 387                r = x[i]+w[i];
 388                t = y[i];
 389                b = y[i]+h[i];
 390
 391                /* insert left/right coordinates */
 392                pixel_list[ 2*i   ] = min_t(int, l, width);
 393                pixel_list[(2*i)+1] = min_t(int, r, width);
 394                /* insert top/bottom coordinates */
 395                line_list[ 2*i   ] = min_t(int, t, height);
 396                line_list[(2*i)+1] = min_t(int, b, height);
 397        }
 398
 399        /* sort and eliminate lists */
 400        cnt_line = cnt_pixel = 2*clipcount;
 401        sort_and_eliminate( &pixel_list[0], &cnt_pixel );
 402        sort_and_eliminate( &line_list[0], &cnt_line );
 403
 404        /* calculate the number of used u32s */
 405        numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
 406        numdwords = max_t(int, 4, numdwords);
 407        numdwords = min_t(int, 64, numdwords);
 408
 409        /* fill up cliptable */
 410        for(i = 0; i < cnt_pixel; i++) {
 411                clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
 412        }
 413        for(i = 0; i < cnt_line; i++) {
 414                clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
 415        }
 416
 417        /* fill up cliptable with the display infos */
 418        for(j = 0; j < clipcount; j++) {
 419
 420                for(i = 0; i < cnt_pixel; i++) {
 421
 422                        if( x[j] < 0)
 423                                x[j] = 0;
 424
 425                        if( pixel_list[i] < (x[j] + w[j])) {
 426
 427                                if ( pixel_list[i] >= x[j] ) {
 428                                        clipping[2*i] |= cpu_to_le32(1 << j);
 429                                }
 430                        }
 431                }
 432                for(i = 0; i < cnt_line; i++) {
 433
 434                        if( y[j] < 0)
 435                                y[j] = 0;
 436
 437                        if( line_list[i] < (y[j] + h[j]) ) {
 438
 439                                if( line_list[i] >= y[j] ) {
 440                                        clipping[(2*i)+1] |= cpu_to_le32(1 << j);
 441                                }
 442                        }
 443                }
 444        }
 445
 446        /* adjust arbitration control register */
 447        *arbtr_ctrl &= 0xffff00ff;
 448        *arbtr_ctrl |= 0x00001c00;
 449
 450        vdma2->base_even        = vv->d_clipping.dma_handle;
 451        vdma2->base_odd         = vv->d_clipping.dma_handle;
 452        vdma2->prot_addr        = vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
 453        vdma2->base_page        = 0x04;
 454        vdma2->pitch            = 0x00;
 455        vdma2->num_line_byte    = (0 << 16 | (sizeof(u32))*(numdwords-1) );
 456
 457        /* set clipping-mode. this depends on the field(s) used */
 458        *clip_format &= 0xfffffff7;
 459        if (V4L2_FIELD_HAS_BOTH(field)) {
 460                *clip_format |= 0x00000008;
 461        } else {
 462                *clip_format |= 0x00000000;
 463        }
 464}
 465
 466/* disable clipping */
 467static void saa7146_disable_clipping(struct saa7146_dev *dev)
 468{
 469        u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 470
 471        /* mask out relevant bits (=lower word)*/
 472        clip_format &= MASK_W1;
 473
 474        /* upload clipping-registers*/
 475        saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
 476        saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 477
 478        /* disable video dma2 */
 479        saa7146_write(dev, MC1, MASK_21);
 480}
 481
 482static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
 483{
 484        struct saa7146_dev *dev = fh->dev;
 485        enum v4l2_field field = fh->ov.win.field;
 486        struct  saa7146_video_dma vdma2;
 487        u32 clip_format;
 488        u32 arbtr_ctrl;
 489
 490        /* check clipcount, disable clipping if clipcount == 0*/
 491        if( fh->ov.nclips == 0 ) {
 492                saa7146_disable_clipping(dev);
 493                return;
 494        }
 495
 496        clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 497        arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
 498
 499        calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
 500
 501        /* set clipping format */
 502        clip_format &= 0xffff0008;
 503        clip_format |= (SAA7146_CLIPPING_RECT << 4);
 504
 505        /* prepare video dma2 */
 506        saa7146_write(dev, BASE_EVEN2,          vdma2.base_even);
 507        saa7146_write(dev, BASE_ODD2,           vdma2.base_odd);
 508        saa7146_write(dev, PROT_ADDR2,          vdma2.prot_addr);
 509        saa7146_write(dev, BASE_PAGE2,          vdma2.base_page);
 510        saa7146_write(dev, PITCH2,              vdma2.pitch);
 511        saa7146_write(dev, NUM_LINE_BYTE2,      vdma2.num_line_byte);
 512
 513        /* prepare the rest */
 514        saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
 515        saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
 516
 517        /* upload clip_control-register, clipping-registers, enable video dma2 */
 518        saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
 519        saa7146_write(dev, MC1, (MASK_05 | MASK_21));
 520}
 521
 522static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
 523{
 524        struct saa7146_vv *vv = dev->vv_data;
 525
 526        int source = vv->current_hps_source;
 527        int sync = vv->current_hps_sync;
 528
 529        u32 hps_v_scale = 0, hps_v_gain  = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
 530
 531        /* set vertical scale */
 532        hps_v_scale = 0; /* all bits get set by the function-call */
 533        hps_v_gain  = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
 534        calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
 535
 536        /* set horizontal scale */
 537        hps_ctrl        = 0;
 538        hps_h_prescale  = 0; /* all bits get set in the function */
 539        hps_h_scale     = 0;
 540        calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
 541
 542        /* set hyo and hxo */
 543        calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
 544        calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
 545
 546        /* write out new register contents */
 547        saa7146_write(dev, HPS_V_SCALE, hps_v_scale);
 548        saa7146_write(dev, HPS_V_GAIN,  hps_v_gain);
 549        saa7146_write(dev, HPS_CTRL,    hps_ctrl);
 550        saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
 551        saa7146_write(dev, HPS_H_SCALE, hps_h_scale);
 552
 553        /* upload shadow-ram registers */
 554        saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
 555}
 556
 557/* calculate the new memory offsets for a desired position */
 558static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
 559{
 560        struct saa7146_vv *vv = dev->vv_data;
 561        struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
 562
 563        int b_depth = vv->ov_fmt->depth;
 564        int b_bpl = vv->ov_fb.fmt.bytesperline;
 565        /* The unsigned long cast is to remove a 64-bit compile warning since
 566           it looks like a 64-bit address is cast to a 32-bit value, even
 567           though the base pointer is really a 32-bit physical address that
 568           goes into a 32-bit DMA register.
 569           FIXME: might not work on some 64-bit platforms, but see the FIXME
 570           in struct v4l2_framebuffer (videodev2.h) for that.
 571         */
 572        u32 base = (u32)(unsigned long)vv->ov_fb.base;
 573
 574        struct  saa7146_video_dma vdma1;
 575
 576        /* calculate memory offsets for picture, look if we shall top-down-flip */
 577        vdma1.pitch     = 2*b_bpl;
 578        if ( 0 == vv->vflip ) {
 579                vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
 580                vdma1.base_odd  = vdma1.base_even + (vdma1.pitch / 2);
 581                vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
 582        }
 583        else {
 584                vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
 585                vdma1.base_odd  = vdma1.base_even - (vdma1.pitch / 2);
 586                vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
 587        }
 588
 589        if (V4L2_FIELD_HAS_BOTH(field)) {
 590        } else if (field == V4L2_FIELD_ALTERNATE) {
 591                /* fixme */
 592                vdma1.base_odd = vdma1.prot_addr;
 593                vdma1.pitch /= 2;
 594        } else if (field == V4L2_FIELD_TOP) {
 595                vdma1.base_odd = vdma1.prot_addr;
 596                vdma1.pitch /= 2;
 597        } else if (field == V4L2_FIELD_BOTTOM) {
 598                vdma1.base_odd = vdma1.base_even;
 599                vdma1.base_even = vdma1.prot_addr;
 600                vdma1.pitch /= 2;
 601        }
 602
 603        if ( 0 != vv->vflip ) {
 604                vdma1.pitch *= -1;
 605        }
 606
 607        vdma1.base_page = sfmt->swap;
 608        vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
 609
 610        saa7146_write_out_dma(dev, 1, &vdma1);
 611}
 612
 613static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
 614{
 615        u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
 616
 617        /* call helper function */
 618        calculate_output_format_register(dev,palette,&clip_format);
 619
 620        /* update the hps registers */
 621        saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
 622        saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 623}
 624
 625/* select input-source */
 626void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
 627{
 628        struct saa7146_vv *vv = dev->vv_data;
 629        u32 hps_ctrl = 0;
 630
 631        /* read old state */
 632        hps_ctrl = saa7146_read(dev, HPS_CTRL);
 633
 634        hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
 635        hps_ctrl |= (source << 30) | (sync << 28);
 636
 637        /* write back & upload register */
 638        saa7146_write(dev, HPS_CTRL, hps_ctrl);
 639        saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 640
 641        vv->current_hps_source = source;
 642        vv->current_hps_sync = sync;
 643}
 644EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
 645
 646int saa7146_enable_overlay(struct saa7146_fh *fh)
 647{
 648        struct saa7146_dev *dev = fh->dev;
 649        struct saa7146_vv *vv = dev->vv_data;
 650
 651        saa7146_set_window(dev, fh->ov.win.w.width, fh->ov.win.w.height, fh->ov.win.field);
 652        saa7146_set_position(dev, fh->ov.win.w.left, fh->ov.win.w.top, fh->ov.win.w.height, fh->ov.win.field, vv->ov_fmt->pixelformat);
 653        saa7146_set_output_format(dev, vv->ov_fmt->trans);
 654        saa7146_set_clipping_rect(fh);
 655
 656        /* enable video dma1 */
 657        saa7146_write(dev, MC1, (MASK_06 | MASK_22));
 658        return 0;
 659}
 660
 661void saa7146_disable_overlay(struct saa7146_fh *fh)
 662{
 663        struct saa7146_dev *dev = fh->dev;
 664
 665        /* disable clipping + video dma1 */
 666        saa7146_disable_clipping(dev);
 667        saa7146_write(dev, MC1, MASK_22);
 668}
 669
 670void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
 671{
 672        int where = 0;
 673
 674        if( which < 1 || which > 3) {
 675                return;
 676        }
 677
 678        /* calculate starting address */
 679        where  = (which-1)*0x18;
 680
 681        saa7146_write(dev, where,       vdma->base_odd);
 682        saa7146_write(dev, where+0x04,  vdma->base_even);
 683        saa7146_write(dev, where+0x08,  vdma->prot_addr);
 684        saa7146_write(dev, where+0x0c,  vdma->pitch);
 685        saa7146_write(dev, where+0x10,  vdma->base_page);
 686        saa7146_write(dev, where+0x14,  vdma->num_line_byte);
 687
 688        /* upload */
 689        saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
 690/*
 691        printk("vdma%d.base_even:     0x%08x\n", which,vdma->base_even);
 692        printk("vdma%d.base_odd:      0x%08x\n", which,vdma->base_odd);
 693        printk("vdma%d.prot_addr:     0x%08x\n", which,vdma->prot_addr);
 694        printk("vdma%d.base_page:     0x%08x\n", which,vdma->base_page);
 695        printk("vdma%d.pitch:         0x%08x\n", which,vdma->pitch);
 696        printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
 697*/
 698}
 699
 700static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
 701{
 702        struct saa7146_vv *vv = dev->vv_data;
 703        struct saa7146_video_dma vdma1;
 704
 705        struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 706
 707        int width = buf->fmt->width;
 708        int height = buf->fmt->height;
 709        int bytesperline = buf->fmt->bytesperline;
 710        enum v4l2_field field = buf->fmt->field;
 711
 712        int depth = sfmt->depth;
 713
 714        DEB_CAP(("[size=%dx%d,fields=%s]\n",
 715                width,height,v4l2_field_names[field]));
 716
 717        if( bytesperline != 0) {
 718                vdma1.pitch = bytesperline*2;
 719        } else {
 720                vdma1.pitch = (width*depth*2)/8;
 721        }
 722        vdma1.num_line_byte     = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
 723        vdma1.base_page         = buf->pt[0].dma | ME1 | sfmt->swap;
 724
 725        if( 0 != vv->vflip ) {
 726                vdma1.prot_addr = buf->pt[0].offset;
 727                vdma1.base_even = buf->pt[0].offset+(vdma1.pitch/2)*height;
 728                vdma1.base_odd  = vdma1.base_even - (vdma1.pitch/2);
 729        } else {
 730                vdma1.base_even = buf->pt[0].offset;
 731                vdma1.base_odd  = vdma1.base_even + (vdma1.pitch/2);
 732                vdma1.prot_addr = buf->pt[0].offset+(vdma1.pitch/2)*height;
 733        }
 734
 735        if (V4L2_FIELD_HAS_BOTH(field)) {
 736        } else if (field == V4L2_FIELD_ALTERNATE) {
 737                /* fixme */
 738                if ( vv->last_field == V4L2_FIELD_TOP ) {
 739                        vdma1.base_odd  = vdma1.prot_addr;
 740                        vdma1.pitch /= 2;
 741                } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
 742                        vdma1.base_odd  = vdma1.base_even;
 743                        vdma1.base_even = vdma1.prot_addr;
 744                        vdma1.pitch /= 2;
 745                }
 746        } else if (field == V4L2_FIELD_TOP) {
 747                vdma1.base_odd  = vdma1.prot_addr;
 748                vdma1.pitch /= 2;
 749        } else if (field == V4L2_FIELD_BOTTOM) {
 750                vdma1.base_odd  = vdma1.base_even;
 751                vdma1.base_even = vdma1.prot_addr;
 752                vdma1.pitch /= 2;
 753        }
 754
 755        if( 0 != vv->vflip ) {
 756                vdma1.pitch *= -1;
 757        }
 758
 759        saa7146_write_out_dma(dev, 1, &vdma1);
 760        return 0;
 761}
 762
 763static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
 764{
 765        int height = buf->fmt->height;
 766        int width = buf->fmt->width;
 767
 768        vdma2->pitch    = width;
 769        vdma3->pitch    = width;
 770
 771        /* fixme: look at bytesperline! */
 772
 773        if( 0 != vv->vflip ) {
 774                vdma2->prot_addr        = buf->pt[1].offset;
 775                vdma2->base_even        = ((vdma2->pitch/2)*height)+buf->pt[1].offset;
 776                vdma2->base_odd         = vdma2->base_even - (vdma2->pitch/2);
 777
 778                vdma3->prot_addr        = buf->pt[2].offset;
 779                vdma3->base_even        = ((vdma3->pitch/2)*height)+buf->pt[2].offset;
 780                vdma3->base_odd         = vdma3->base_even - (vdma3->pitch/2);
 781        } else {
 782                vdma3->base_even        = buf->pt[2].offset;
 783                vdma3->base_odd         = vdma3->base_even + (vdma3->pitch/2);
 784                vdma3->prot_addr        = (vdma3->pitch/2)*height+buf->pt[2].offset;
 785
 786                vdma2->base_even        = buf->pt[1].offset;
 787                vdma2->base_odd         = vdma2->base_even + (vdma2->pitch/2);
 788                vdma2->prot_addr        = (vdma2->pitch/2)*height+buf->pt[1].offset;
 789        }
 790
 791        return 0;
 792}
 793
 794static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
 795{
 796        int height = buf->fmt->height;
 797        int width = buf->fmt->width;
 798
 799        vdma2->pitch    = width/2;
 800        vdma3->pitch    = width/2;
 801
 802        if( 0 != vv->vflip ) {
 803                vdma2->prot_addr        = buf->pt[2].offset;
 804                vdma2->base_even        = ((vdma2->pitch/2)*height)+buf->pt[2].offset;
 805                vdma2->base_odd         = vdma2->base_even - (vdma2->pitch/2);
 806
 807                vdma3->prot_addr        = buf->pt[1].offset;
 808                vdma3->base_even        = ((vdma3->pitch/2)*height)+buf->pt[1].offset;
 809                vdma3->base_odd         = vdma3->base_even - (vdma3->pitch/2);
 810
 811        } else {
 812                vdma3->base_even        = buf->pt[2].offset;
 813                vdma3->base_odd         = vdma3->base_even + (vdma3->pitch);
 814                vdma3->prot_addr        = (vdma3->pitch/2)*height+buf->pt[2].offset;
 815
 816                vdma2->base_even        = buf->pt[1].offset;
 817                vdma2->base_odd         = vdma2->base_even + (vdma2->pitch);
 818                vdma2->prot_addr        = (vdma2->pitch/2)*height+buf->pt[1].offset;
 819        }
 820        return 0;
 821}
 822
 823static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
 824{
 825        struct saa7146_vv *vv = dev->vv_data;
 826        struct saa7146_video_dma vdma1;
 827        struct saa7146_video_dma vdma2;
 828        struct saa7146_video_dma vdma3;
 829
 830        struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 831
 832        int width = buf->fmt->width;
 833        int height = buf->fmt->height;
 834        enum v4l2_field field = buf->fmt->field;
 835
 836        BUG_ON(0 == buf->pt[0].dma);
 837        BUG_ON(0 == buf->pt[1].dma);
 838        BUG_ON(0 == buf->pt[2].dma);
 839
 840        DEB_CAP(("[size=%dx%d,fields=%s]\n",
 841                width,height,v4l2_field_names[field]));
 842
 843        /* fixme: look at bytesperline! */
 844
 845        /* fixme: what happens for user space buffers here?. The offsets are
 846           most likely wrong, this version here only works for page-aligned
 847           buffers, modifications to the pagetable-functions are necessary...*/
 848
 849        vdma1.pitch             = width*2;
 850        vdma1.num_line_byte     = ((vv->standard->v_field<<16) + vv->standard->h_pixels);
 851        vdma1.base_page         = buf->pt[0].dma | ME1;
 852
 853        if( 0 != vv->vflip ) {
 854                vdma1.prot_addr = buf->pt[0].offset;
 855                vdma1.base_even = ((vdma1.pitch/2)*height)+buf->pt[0].offset;
 856                vdma1.base_odd  = vdma1.base_even - (vdma1.pitch/2);
 857        } else {
 858                vdma1.base_even = buf->pt[0].offset;
 859                vdma1.base_odd  = vdma1.base_even + (vdma1.pitch/2);
 860                vdma1.prot_addr = (vdma1.pitch/2)*height+buf->pt[0].offset;
 861        }
 862
 863        vdma2.num_line_byte     = 0; /* unused */
 864        vdma2.base_page         = buf->pt[1].dma | ME1;
 865
 866        vdma3.num_line_byte     = 0; /* unused */
 867        vdma3.base_page         = buf->pt[2].dma | ME1;
 868
 869        switch( sfmt->depth ) {
 870                case 12: {
 871                        calc_planar_420(vv,buf,&vdma2,&vdma3);
 872                        break;
 873                }
 874                case 16: {
 875                        calc_planar_422(vv,buf,&vdma2,&vdma3);
 876                        break;
 877                }
 878                default: {
 879                        return -1;
 880                }
 881        }
 882
 883        if (V4L2_FIELD_HAS_BOTH(field)) {
 884        } else if (field == V4L2_FIELD_ALTERNATE) {
 885                /* fixme */
 886                vdma1.base_odd  = vdma1.prot_addr;
 887                vdma1.pitch /= 2;
 888                vdma2.base_odd  = vdma2.prot_addr;
 889                vdma2.pitch /= 2;
 890                vdma3.base_odd  = vdma3.prot_addr;
 891                vdma3.pitch /= 2;
 892        } else if (field == V4L2_FIELD_TOP) {
 893                vdma1.base_odd  = vdma1.prot_addr;
 894                vdma1.pitch /= 2;
 895                vdma2.base_odd  = vdma2.prot_addr;
 896                vdma2.pitch /= 2;
 897                vdma3.base_odd  = vdma3.prot_addr;
 898                vdma3.pitch /= 2;
 899        } else if (field == V4L2_FIELD_BOTTOM) {
 900                vdma1.base_odd  = vdma1.base_even;
 901                vdma1.base_even = vdma1.prot_addr;
 902                vdma1.pitch /= 2;
 903                vdma2.base_odd  = vdma2.base_even;
 904                vdma2.base_even = vdma2.prot_addr;
 905                vdma2.pitch /= 2;
 906                vdma3.base_odd  = vdma3.base_even;
 907                vdma3.base_even = vdma3.prot_addr;
 908                vdma3.pitch /= 2;
 909        }
 910
 911        if( 0 != vv->vflip ) {
 912                vdma1.pitch *= -1;
 913                vdma2.pitch *= -1;
 914                vdma3.pitch *= -1;
 915        }
 916
 917        saa7146_write_out_dma(dev, 1, &vdma1);
 918        if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
 919                saa7146_write_out_dma(dev, 3, &vdma2);
 920                saa7146_write_out_dma(dev, 2, &vdma3);
 921        } else {
 922                saa7146_write_out_dma(dev, 2, &vdma2);
 923                saa7146_write_out_dma(dev, 3, &vdma3);
 924        }
 925        return 0;
 926}
 927
 928static void program_capture_engine(struct saa7146_dev *dev, int planar)
 929{
 930        struct saa7146_vv *vv = dev->vv_data;
 931        int count = 0;
 932
 933        unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
 934        unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
 935
 936        /* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
 937        WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
 938        WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
 939
 940        /* set rps register 0 */
 941        WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
 942        WRITE_RPS0(MASK_27 | MASK_11);
 943
 944        /* turn on video-dma1 */
 945        WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 946        WRITE_RPS0(MASK_06 | MASK_22);                  /* => mask */
 947        WRITE_RPS0(MASK_06 | MASK_22);                  /* => values */
 948        if( 0 != planar ) {
 949                /* turn on video-dma2 */
 950                WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 951                WRITE_RPS0(MASK_05 | MASK_21);                  /* => mask */
 952                WRITE_RPS0(MASK_05 | MASK_21);                  /* => values */
 953
 954                /* turn on video-dma3 */
 955                WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 956                WRITE_RPS0(MASK_04 | MASK_20);                  /* => mask */
 957                WRITE_RPS0(MASK_04 | MASK_20);                  /* => values */
 958        }
 959
 960        /* wait for o_fid_a/b / e_fid_a/b toggle */
 961        if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
 962                WRITE_RPS0(CMD_PAUSE | o_wait);
 963                WRITE_RPS0(CMD_PAUSE | e_wait);
 964        } else if ( vv->last_field == V4L2_FIELD_TOP ) {
 965                WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
 966                WRITE_RPS0(CMD_PAUSE | o_wait);
 967        } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
 968                WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
 969                WRITE_RPS0(CMD_PAUSE | e_wait);
 970        }
 971
 972        /* turn off video-dma1 */
 973        WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 974        WRITE_RPS0(MASK_22 | MASK_06);                  /* => mask */
 975        WRITE_RPS0(MASK_22);                            /* => values */
 976        if( 0 != planar ) {
 977                /* turn off video-dma2 */
 978                WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 979                WRITE_RPS0(MASK_05 | MASK_21);                  /* => mask */
 980                WRITE_RPS0(MASK_21);                            /* => values */
 981
 982                /* turn off video-dma3 */
 983                WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
 984                WRITE_RPS0(MASK_04 | MASK_20);                  /* => mask */
 985                WRITE_RPS0(MASK_20);                            /* => values */
 986        }
 987
 988        /* generate interrupt */
 989        WRITE_RPS0(CMD_INTERRUPT);
 990
 991        /* stop */
 992        WRITE_RPS0(CMD_STOP);
 993}
 994
 995void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
 996{
 997        struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 998        struct saa7146_vv *vv = dev->vv_data;
 999        u32 vdma1_prot_addr;
1000
1001        DEB_CAP(("buf:%p, next:%p\n",buf,next));
1002
1003        vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
1004        if( 0 == vdma1_prot_addr ) {
1005                /* clear out beginning of streaming bit (rps register 0)*/
1006                DEB_CAP(("forcing sync to new frame\n"));
1007                saa7146_write(dev, MC2, MASK_27 );
1008        }
1009
1010        saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
1011        saa7146_set_output_format(dev, sfmt->trans);
1012        saa7146_disable_clipping(dev);
1013
1014        if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
1015        } else if ( vv->last_field == V4L2_FIELD_TOP ) {
1016                vv->last_field = V4L2_FIELD_BOTTOM;
1017        } else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
1018                vv->last_field = V4L2_FIELD_TOP;
1019        }
1020
1021        if( 0 != IS_PLANAR(sfmt->trans)) {
1022                calculate_video_dma_grab_planar(dev, buf);
1023                program_capture_engine(dev,1);
1024        } else {
1025                calculate_video_dma_grab_packed(dev, buf);
1026                program_capture_engine(dev,0);
1027        }
1028
1029/*
1030        printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
1031        printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
1032        printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
1033        printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
1034        printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
1035        printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
1036        printk("vdma%d => vptr      : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
1037*/
1038
1039        /* write the address of the rps-program */
1040        saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
1041
1042        /* turn on rps */
1043        saa7146_write(dev, MC1, (MASK_12 | MASK_28));
1044}
1045