linux/drivers/media/video/saa7134/saa7134-input.c
<<
>>
Prefs
   1/*
   2 *
   3 * handle saa7134 IR remotes via linux kernel input layer.
   4 *
   5 * This program is free software; you can redistribute it and/or modify
   6 * it under the terms of the GNU General Public License as published by
   7 * the Free Software Foundation; either version 2 of the License, or
   8 * (at your option) any later version.
   9 *
  10 * This program is distributed in the hope that it will be useful,
  11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 * GNU General Public License for more details.
  14 *
  15 * You should have received a copy of the GNU General Public License
  16 * along with this program; if not, write to the Free Software
  17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  18 *
  19 */
  20
  21#include <linux/module.h>
  22#include <linux/init.h>
  23#include <linux/delay.h>
  24#include <linux/interrupt.h>
  25#include <linux/slab.h>
  26
  27#include "saa7134-reg.h"
  28#include "saa7134.h"
  29
  30#define MODULE_NAME "saa7134"
  31
  32static unsigned int disable_ir;
  33module_param(disable_ir, int, 0444);
  34MODULE_PARM_DESC(disable_ir,"disable infrared remote support");
  35
  36static unsigned int ir_debug;
  37module_param(ir_debug, int, 0644);
  38MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]");
  39
  40static int pinnacle_remote;
  41module_param(pinnacle_remote, int, 0644);    /* Choose Pinnacle PCTV remote */
  42MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
  43
  44#define dprintk(fmt, arg...)    if (ir_debug) \
  45        printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
  46#define i2cdprintk(fmt, arg...)    if (ir_debug) \
  47        printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg)
  48
  49/* Helper function for raw decoding at GPIO16 or GPIO18 */
  50static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
  51
  52/* -------------------- GPIO generic keycode builder -------------------- */
  53
  54static int build_key(struct saa7134_dev *dev)
  55{
  56        struct saa7134_card_ir *ir = dev->remote;
  57        u32 gpio, data;
  58
  59        /* here comes the additional handshake steps for some cards */
  60        switch (dev->board) {
  61        case SAA7134_BOARD_GOTVIEW_7135:
  62                saa_setb(SAA7134_GPIO_GPSTATUS1, 0x80);
  63                saa_clearb(SAA7134_GPIO_GPSTATUS1, 0x80);
  64                break;
  65        }
  66        /* rising SAA7134_GPIO_GPRESCAN reads the status */
  67        saa_clearb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN);
  68        saa_setb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN);
  69
  70        gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
  71        if (ir->polling) {
  72                if (ir->last_gpio == gpio)
  73                        return 0;
  74                ir->last_gpio = gpio;
  75        }
  76
  77        data = ir_extract_bits(gpio, ir->mask_keycode);
  78        dprintk("build_key gpio=0x%x mask=0x%x data=%d\n",
  79                gpio, ir->mask_keycode, data);
  80
  81        switch (dev->board) {
  82        case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
  83                if (data == ir->mask_keycode)
  84                        rc_keyup(ir->dev);
  85                else
  86                        rc_keydown_notimeout(ir->dev, data, 0);
  87                return 0;
  88        }
  89
  90        if (ir->polling) {
  91                if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
  92                    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
  93                        rc_keydown_notimeout(ir->dev, data, 0);
  94                } else {
  95                        rc_keyup(ir->dev);
  96                }
  97        }
  98        else {  /* IRQ driven mode - handle key press and release in one go */
  99                if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
 100                    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
 101                        rc_keydown_notimeout(ir->dev, data, 0);
 102                        rc_keyup(ir->dev);
 103                }
 104        }
 105
 106        return 0;
 107}
 108
 109/* --------------------- Chip specific I2C key builders ----------------- */
 110
 111static int get_key_flydvb_trio(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 112{
 113        int gpio;
 114        int attempt = 0;
 115        unsigned char b;
 116
 117        /* We need this to access GPI Used by the saa_readl macro. */
 118        struct saa7134_dev *dev = ir->c->adapter->algo_data;
 119
 120        if (dev == NULL) {
 121                i2cdprintk("get_key_flydvb_trio: "
 122                           "ir->c->adapter->algo_data is NULL!\n");
 123                return -EIO;
 124        }
 125
 126        /* rising SAA7134_GPIGPRESCAN reads the status */
 127        saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 128        saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 129
 130        gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
 131
 132        if (0x40000 & ~gpio)
 133                return 0; /* No button press */
 134
 135        /* No button press - only before first key pressed */
 136        if (b == 0xFF)
 137                return 0;
 138
 139        /* poll IR chip */
 140        /* weak up the IR chip */
 141        b = 0;
 142
 143        while (1 != i2c_master_send(ir->c, &b, 1)) {
 144                if ((attempt++) < 10) {
 145                        /*
 146                         * wait a bit for next attempt -
 147                         * I don't know how make it better
 148                         */
 149                        msleep(10);
 150                        continue;
 151                }
 152                i2cdprintk("send wake up byte to pic16C505 (IR chip)"
 153                           "failed %dx\n", attempt);
 154                return -EIO;
 155        }
 156        if (1 != i2c_master_recv(ir->c, &b, 1)) {
 157                i2cdprintk("read error\n");
 158                return -EIO;
 159        }
 160
 161        *ir_key = b;
 162        *ir_raw = b;
 163        return 1;
 164}
 165
 166static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 167                                       u32 *ir_raw)
 168{
 169        unsigned char b;
 170        int gpio;
 171
 172        /* <dev> is needed to access GPIO. Used by the saa_readl macro. */
 173        struct saa7134_dev *dev = ir->c->adapter->algo_data;
 174        if (dev == NULL) {
 175                i2cdprintk("get_key_msi_tvanywhere_plus: "
 176                           "ir->c->adapter->algo_data is NULL!\n");
 177                return -EIO;
 178        }
 179
 180        /* rising SAA7134_GPIO_GPRESCAN reads the status */
 181
 182        saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 183        saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 184
 185        gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
 186
 187        /* GPIO&0x40 is pulsed low when a button is pressed. Don't do
 188           I2C receive if gpio&0x40 is not low. */
 189
 190        if (gpio & 0x40)
 191                return 0;       /* No button press */
 192
 193        /* GPIO says there is a button press. Get it. */
 194
 195        if (1 != i2c_master_recv(ir->c, &b, 1)) {
 196                i2cdprintk("read error\n");
 197                return -EIO;
 198        }
 199
 200        /* No button press */
 201
 202        if (b == 0xff)
 203                return 0;
 204
 205        /* Button pressed */
 206
 207        dprintk("get_key_msi_tvanywhere_plus: Key = 0x%02X\n", b);
 208        *ir_key = b;
 209        *ir_raw = b;
 210        return 1;
 211}
 212
 213static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 214{
 215        unsigned char b;
 216
 217        /* poll IR chip */
 218        if (1 != i2c_master_recv(ir->c, &b, 1)) {
 219                i2cdprintk("read error\n");
 220                return -EIO;
 221        }
 222
 223        /* no button press */
 224        if (b==0)
 225                return 0;
 226
 227        /* repeating */
 228        if (b & 0x80)
 229                return 1;
 230
 231        *ir_key = b;
 232        *ir_raw = b;
 233        return 1;
 234}
 235
 236static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 237{
 238        unsigned char buf[5], cod4, code3, code4;
 239
 240        /* poll IR chip */
 241        if (5 != i2c_master_recv(ir->c, buf, 5))
 242                return -EIO;
 243
 244        cod4    = buf[4];
 245        code4   = (cod4 >> 2);
 246        code3   = buf[3];
 247        if (code3 == 0)
 248                /* no key pressed */
 249                return 0;
 250
 251        /* return key */
 252        *ir_key = code4;
 253        *ir_raw = code4;
 254        return 1;
 255}
 256
 257
 258static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 259{
 260        unsigned char data[12];
 261        u32 gpio;
 262
 263        struct saa7134_dev *dev = ir->c->adapter->algo_data;
 264
 265        /* rising SAA7134_GPIO_GPRESCAN reads the status */
 266        saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 267        saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 268
 269        gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
 270
 271        if (0x400000 & ~gpio)
 272                return 0; /* No button press */
 273
 274        ir->c->addr = 0x5a >> 1;
 275
 276        if (12 != i2c_master_recv(ir->c, data, 12)) {
 277                i2cdprintk("read error\n");
 278                return -EIO;
 279        }
 280
 281        if (data[9] != (unsigned char)(~data[8]))
 282                return 0;
 283
 284        *ir_raw = ((data[10] << 16) | (data[11] << 8) | (data[9] << 0));
 285        *ir_key = *ir_raw;
 286
 287        return 1;
 288}
 289
 290/* Common (grey or coloured) pinnacle PCTV remote handling
 291 *
 292 */
 293static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw,
 294                            int parity_offset, int marker, int code_modulo)
 295{
 296        unsigned char b[4];
 297        unsigned int start = 0,parity = 0,code = 0;
 298
 299        /* poll IR chip */
 300        if (4 != i2c_master_recv(ir->c, b, 4)) {
 301                i2cdprintk("read error\n");
 302                return -EIO;
 303        }
 304
 305        for (start = 0; start < ARRAY_SIZE(b); start++) {
 306                if (b[start] == marker) {
 307                        code=b[(start+parity_offset + 1) % 4];
 308                        parity=b[(start+parity_offset) % 4];
 309                }
 310        }
 311
 312        /* Empty Request */
 313        if (parity == 0)
 314                return 0;
 315
 316        /* Repeating... */
 317        if (ir->old == parity)
 318                return 0;
 319
 320        ir->old = parity;
 321
 322        /* drop special codes when a key is held down a long time for the grey controller
 323           In this case, the second bit of the code is asserted */
 324        if (marker == 0xfe && (code & 0x40))
 325                return 0;
 326
 327        code %= code_modulo;
 328
 329        *ir_raw = code;
 330        *ir_key = code;
 331
 332        i2cdprintk("Pinnacle PCTV key %02x\n", code);
 333
 334        return 1;
 335}
 336
 337/* The grey pinnacle PCTV remote
 338 *
 339 *  There are one issue with this remote:
 340 *   - I2c packet does not change when the same key is pressed quickly. The workaround
 341 *     is to hold down each key for about half a second, so that another code is generated
 342 *     in the i2c packet, and the function can distinguish key presses.
 343 *
 344 * Sylvain Pasche <sylvain.pasche@gmail.com>
 345 */
 346static int get_key_pinnacle_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 347{
 348
 349        return get_key_pinnacle(ir, ir_key, ir_raw, 1, 0xfe, 0xff);
 350}
 351
 352
 353/* The new pinnacle PCTV remote (with the colored buttons)
 354 *
 355 * Ricardo Cerqueira <v4l@cerqueira.org>
 356 */
 357static int get_key_pinnacle_color(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 358{
 359        /* code_modulo parameter (0x88) is used to reduce code value to fit inside IR_KEYTAB_SIZE
 360         *
 361         * this is the only value that results in 42 unique
 362         * codes < 128
 363         */
 364
 365        return get_key_pinnacle(ir, ir_key, ir_raw, 2, 0x80, 0x88);
 366}
 367
 368void saa7134_input_irq(struct saa7134_dev *dev)
 369{
 370        struct saa7134_card_ir *ir;
 371
 372        if (!dev || !dev->remote)
 373                return;
 374
 375        ir = dev->remote;
 376        if (!ir->running)
 377                return;
 378
 379        if (!ir->polling && !ir->raw_decode) {
 380                build_key(dev);
 381        } else if (ir->raw_decode) {
 382                saa7134_raw_decode_irq(dev);
 383        }
 384}
 385
 386static void saa7134_input_timer(unsigned long data)
 387{
 388        struct saa7134_dev *dev = (struct saa7134_dev *)data;
 389        struct saa7134_card_ir *ir = dev->remote;
 390
 391        build_key(dev);
 392        mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
 393}
 394
 395static void ir_raw_decode_timer_end(unsigned long data)
 396{
 397        struct saa7134_dev *dev = (struct saa7134_dev *)data;
 398        struct saa7134_card_ir *ir = dev->remote;
 399
 400        ir_raw_event_handle(dev->remote->dev);
 401
 402        ir->active = false;
 403}
 404
 405static int __saa7134_ir_start(void *priv)
 406{
 407        struct saa7134_dev *dev = priv;
 408        struct saa7134_card_ir *ir;
 409
 410        if (!dev || !dev->remote)
 411                return -EINVAL;
 412
 413        ir  = dev->remote;
 414        if (ir->running)
 415                return 0;
 416
 417        ir->running = true;
 418        ir->active = false;
 419
 420        if (ir->polling) {
 421                setup_timer(&ir->timer, saa7134_input_timer,
 422                            (unsigned long)dev);
 423                ir->timer.expires = jiffies + HZ;
 424                add_timer(&ir->timer);
 425        } else if (ir->raw_decode) {
 426                /* set timer_end for code completion */
 427                setup_timer(&ir->timer, ir_raw_decode_timer_end,
 428                            (unsigned long)dev);
 429        }
 430
 431        return 0;
 432}
 433
 434static void __saa7134_ir_stop(void *priv)
 435{
 436        struct saa7134_dev *dev = priv;
 437        struct saa7134_card_ir *ir;
 438
 439        if (!dev || !dev->remote)
 440                return;
 441
 442        ir  = dev->remote;
 443        if (!ir->running)
 444                return;
 445
 446        if (ir->polling || ir->raw_decode)
 447                del_timer_sync(&ir->timer);
 448
 449        ir->active = false;
 450        ir->running = false;
 451
 452        return;
 453}
 454
 455int saa7134_ir_start(struct saa7134_dev *dev)
 456{
 457        if (dev->remote->users)
 458                return __saa7134_ir_start(dev);
 459
 460        return 0;
 461}
 462
 463void saa7134_ir_stop(struct saa7134_dev *dev)
 464{
 465        if (dev->remote->users)
 466                __saa7134_ir_stop(dev);
 467}
 468
 469static int saa7134_ir_open(struct rc_dev *rc)
 470{
 471        struct saa7134_dev *dev = rc->priv;
 472
 473        dev->remote->users++;
 474        return __saa7134_ir_start(dev);
 475}
 476
 477static void saa7134_ir_close(struct rc_dev *rc)
 478{
 479        struct saa7134_dev *dev = rc->priv;
 480
 481        dev->remote->users--;
 482        if (!dev->remote->users)
 483                __saa7134_ir_stop(dev);
 484}
 485
 486int saa7134_input_init1(struct saa7134_dev *dev)
 487{
 488        struct saa7134_card_ir *ir;
 489        struct rc_dev *rc;
 490        char *ir_codes = NULL;
 491        u32 mask_keycode = 0;
 492        u32 mask_keydown = 0;
 493        u32 mask_keyup   = 0;
 494        unsigned polling = 0;
 495        bool raw_decode  = false;
 496        int err;
 497
 498        if (dev->has_remote != SAA7134_REMOTE_GPIO)
 499                return -ENODEV;
 500        if (disable_ir)
 501                return -ENODEV;
 502
 503        /* detect & configure */
 504        switch (dev->board) {
 505        case SAA7134_BOARD_FLYVIDEO2000:
 506        case SAA7134_BOARD_FLYVIDEO3000:
 507        case SAA7134_BOARD_FLYTVPLATINUM_FM:
 508        case SAA7134_BOARD_FLYTVPLATINUM_MINI2:
 509        case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM:
 510                ir_codes     = RC_MAP_FLYVIDEO;
 511                mask_keycode = 0xEC00000;
 512                mask_keydown = 0x0040000;
 513                break;
 514        case SAA7134_BOARD_CINERGY400:
 515        case SAA7134_BOARD_CINERGY600:
 516        case SAA7134_BOARD_CINERGY600_MK3:
 517                ir_codes     = RC_MAP_CINERGY;
 518                mask_keycode = 0x00003f;
 519                mask_keyup   = 0x040000;
 520                break;
 521        case SAA7134_BOARD_ECS_TVP3XP:
 522        case SAA7134_BOARD_ECS_TVP3XP_4CB5:
 523                ir_codes     = RC_MAP_EZTV;
 524                mask_keycode = 0x00017c;
 525                mask_keyup   = 0x000002;
 526                polling      = 50; // ms
 527                break;
 528        case SAA7134_BOARD_KWORLD_XPERT:
 529        case SAA7134_BOARD_AVACSSMARTTV:
 530                ir_codes     = RC_MAP_PIXELVIEW;
 531                mask_keycode = 0x00001F;
 532                mask_keyup   = 0x000020;
 533                polling      = 50; // ms
 534                break;
 535        case SAA7134_BOARD_MD2819:
 536        case SAA7134_BOARD_KWORLD_VSTREAM_XPERT:
 537        case SAA7134_BOARD_AVERMEDIA_305:
 538        case SAA7134_BOARD_AVERMEDIA_307:
 539        case SAA7134_BOARD_AVERMEDIA_STUDIO_305:
 540        case SAA7134_BOARD_AVERMEDIA_STUDIO_505:
 541        case SAA7134_BOARD_AVERMEDIA_STUDIO_307:
 542        case SAA7134_BOARD_AVERMEDIA_STUDIO_507:
 543        case SAA7134_BOARD_AVERMEDIA_STUDIO_507UA:
 544        case SAA7134_BOARD_AVERMEDIA_GO_007_FM:
 545        case SAA7134_BOARD_AVERMEDIA_M102:
 546        case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS:
 547                ir_codes     = RC_MAP_AVERMEDIA;
 548                mask_keycode = 0x0007C8;
 549                mask_keydown = 0x000010;
 550                polling      = 50; // ms
 551                /* Set GPIO pin2 to high to enable the IR controller */
 552                saa_setb(SAA7134_GPIO_GPMODE0, 0x4);
 553                saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4);
 554                break;
 555        case SAA7134_BOARD_AVERMEDIA_M135A:
 556                ir_codes     = RC_MAP_AVERMEDIA_M135A;
 557                mask_keydown = 0x0040000;       /* Enable GPIO18 line on both edges */
 558                mask_keyup   = 0x0040000;
 559                mask_keycode = 0xffff;
 560                raw_decode   = true;
 561                break;
 562        case SAA7134_BOARD_AVERMEDIA_M733A:
 563                ir_codes     = RC_MAP_AVERMEDIA_M733A_RM_K6;
 564                mask_keydown = 0x0040000;
 565                mask_keyup   = 0x0040000;
 566                mask_keycode = 0xffff;
 567                raw_decode   = true;
 568                break;
 569        case SAA7134_BOARD_AVERMEDIA_777:
 570        case SAA7134_BOARD_AVERMEDIA_A16AR:
 571                ir_codes     = RC_MAP_AVERMEDIA;
 572                mask_keycode = 0x02F200;
 573                mask_keydown = 0x000400;
 574                polling      = 50; // ms
 575                /* Without this we won't receive key up events */
 576                saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
 577                saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
 578                break;
 579        case SAA7134_BOARD_AVERMEDIA_A16D:
 580                ir_codes     = RC_MAP_AVERMEDIA_A16D;
 581                mask_keycode = 0x02F200;
 582                mask_keydown = 0x000400;
 583                polling      = 50; /* ms */
 584                /* Without this we won't receive key up events */
 585                saa_setb(SAA7134_GPIO_GPMODE1, 0x1);
 586                saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1);
 587                break;
 588        case SAA7134_BOARD_KWORLD_TERMINATOR:
 589                ir_codes     = RC_MAP_PIXELVIEW;
 590                mask_keycode = 0x00001f;
 591                mask_keyup   = 0x000060;
 592                polling      = 50; // ms
 593                break;
 594        case SAA7134_BOARD_MANLI_MTV001:
 595        case SAA7134_BOARD_MANLI_MTV002:
 596                ir_codes     = RC_MAP_MANLI;
 597                mask_keycode = 0x001f00;
 598                mask_keyup   = 0x004000;
 599                polling      = 50; /* ms */
 600                break;
 601        case SAA7134_BOARD_BEHOLD_409FM:
 602        case SAA7134_BOARD_BEHOLD_401:
 603        case SAA7134_BOARD_BEHOLD_403:
 604        case SAA7134_BOARD_BEHOLD_403FM:
 605        case SAA7134_BOARD_BEHOLD_405:
 606        case SAA7134_BOARD_BEHOLD_405FM:
 607        case SAA7134_BOARD_BEHOLD_407:
 608        case SAA7134_BOARD_BEHOLD_407FM:
 609        case SAA7134_BOARD_BEHOLD_409:
 610        case SAA7134_BOARD_BEHOLD_505FM:
 611        case SAA7134_BOARD_BEHOLD_505RDS_MK5:
 612        case SAA7134_BOARD_BEHOLD_505RDS_MK3:
 613        case SAA7134_BOARD_BEHOLD_507_9FM:
 614        case SAA7134_BOARD_BEHOLD_507RDS_MK3:
 615        case SAA7134_BOARD_BEHOLD_507RDS_MK5:
 616                ir_codes     = RC_MAP_MANLI;
 617                mask_keycode = 0x003f00;
 618                mask_keyup   = 0x004000;
 619                polling      = 50; /* ms */
 620                break;
 621        case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
 622                ir_codes     = RC_MAP_BEHOLD_COLUMBUS;
 623                mask_keycode = 0x003f00;
 624                mask_keyup   = 0x004000;
 625                polling      = 50; // ms
 626                break;
 627        case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS:
 628                ir_codes     = RC_MAP_PCTV_SEDNA;
 629                mask_keycode = 0x001f00;
 630                mask_keyup   = 0x004000;
 631                polling      = 50; // ms
 632                break;
 633        case SAA7134_BOARD_GOTVIEW_7135:
 634                ir_codes     = RC_MAP_GOTVIEW7135;
 635                mask_keycode = 0x0003CC;
 636                mask_keydown = 0x000010;
 637                polling      = 5; /* ms */
 638                saa_setb(SAA7134_GPIO_GPMODE1, 0x80);
 639                break;
 640        case SAA7134_BOARD_VIDEOMATE_TV_PVR:
 641        case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS:
 642        case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
 643                ir_codes     = RC_MAP_VIDEOMATE_TV_PVR;
 644                mask_keycode = 0x00003F;
 645                mask_keyup   = 0x400000;
 646                polling      = 50; // ms
 647                break;
 648        case SAA7134_BOARD_PROTEUS_2309:
 649                ir_codes     = RC_MAP_PROTEUS_2309;
 650                mask_keycode = 0x00007F;
 651                mask_keyup   = 0x000080;
 652                polling      = 50; // ms
 653                break;
 654        case SAA7134_BOARD_VIDEOMATE_DVBT_300:
 655        case SAA7134_BOARD_VIDEOMATE_DVBT_200:
 656                ir_codes     = RC_MAP_VIDEOMATE_TV_PVR;
 657                mask_keycode = 0x003F00;
 658                mask_keyup   = 0x040000;
 659                break;
 660        case SAA7134_BOARD_FLYDVBS_LR300:
 661        case SAA7134_BOARD_FLYDVBT_LR301:
 662        case SAA7134_BOARD_FLYDVBTDUO:
 663                ir_codes     = RC_MAP_FLYDVB;
 664                mask_keycode = 0x0001F00;
 665                mask_keydown = 0x0040000;
 666                break;
 667        case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
 668        case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
 669        case SAA7134_BOARD_ASUSTeK_P7131_ANALOG:
 670                ir_codes     = RC_MAP_ASUS_PC39;
 671                mask_keydown = 0x0040000;       /* Enable GPIO18 line on both edges */
 672                mask_keyup   = 0x0040000;
 673                mask_keycode = 0xffff;
 674                raw_decode   = true;
 675                break;
 676        case SAA7134_BOARD_ENCORE_ENLTV:
 677        case SAA7134_BOARD_ENCORE_ENLTV_FM:
 678                ir_codes     = RC_MAP_ENCORE_ENLTV;
 679                mask_keycode = 0x00007f;
 680                mask_keyup   = 0x040000;
 681                polling      = 50; // ms
 682                break;
 683        case SAA7134_BOARD_ENCORE_ENLTV_FM53:
 684                ir_codes     = RC_MAP_ENCORE_ENLTV_FM53;
 685                mask_keydown = 0x0040000;       /* Enable GPIO18 line on both edges */
 686                mask_keyup   = 0x0040000;
 687                mask_keycode = 0xffff;
 688                raw_decode   = true;
 689                break;
 690        case SAA7134_BOARD_10MOONSTVMASTER3:
 691                ir_codes     = RC_MAP_ENCORE_ENLTV;
 692                mask_keycode = 0x5f80000;
 693                mask_keyup   = 0x8000000;
 694                polling      = 50; //ms
 695                break;
 696        case SAA7134_BOARD_GENIUS_TVGO_A11MCE:
 697                ir_codes     = RC_MAP_GENIUS_TVGO_A11MCE;
 698                mask_keycode = 0xff;
 699                mask_keydown = 0xf00000;
 700                polling = 50; /* ms */
 701                break;
 702        case SAA7134_BOARD_REAL_ANGEL_220:
 703                ir_codes     = RC_MAP_REAL_AUDIO_220_32_KEYS;
 704                mask_keycode = 0x3f00;
 705                mask_keyup   = 0x4000;
 706                polling = 50; /* ms */
 707                break;
 708        case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
 709                ir_codes     = RC_MAP_KWORLD_PLUS_TV_ANALOG;
 710                mask_keycode = 0x7f;
 711                polling = 40; /* ms */
 712                break;
 713        case SAA7134_BOARD_VIDEOMATE_S350:
 714                ir_codes     = RC_MAP_VIDEOMATE_S350;
 715                mask_keycode = 0x003f00;
 716                mask_keydown = 0x040000;
 717                break;
 718        case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
 719                ir_codes     = RC_MAP_WINFAST;
 720                mask_keycode = 0x5f00;
 721                mask_keyup   = 0x020000;
 722                polling      = 50; /* ms */
 723                break;
 724        case SAA7134_BOARD_VIDEOMATE_M1F:
 725                ir_codes     = RC_MAP_VIDEOMATE_M1F;
 726                mask_keycode = 0x0ff00;
 727                mask_keyup   = 0x040000;
 728                break;
 729        }
 730        if (NULL == ir_codes) {
 731                printk("%s: Oops: IR config error [card=%d]\n",
 732                       dev->name, dev->board);
 733                return -ENODEV;
 734        }
 735
 736        ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 737        rc = rc_allocate_device();
 738        if (!ir || !rc) {
 739                err = -ENOMEM;
 740                goto err_out_free;
 741        }
 742
 743        ir->dev = rc;
 744        dev->remote = ir;
 745
 746        /* init hardware-specific stuff */
 747        ir->mask_keycode = mask_keycode;
 748        ir->mask_keydown = mask_keydown;
 749        ir->mask_keyup   = mask_keyup;
 750        ir->polling      = polling;
 751        ir->raw_decode   = raw_decode;
 752
 753        /* init input device */
 754        snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)",
 755                 saa7134_boards[dev->board].name);
 756        snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 757                 pci_name(dev->pci));
 758
 759        rc->priv = dev;
 760        rc->open = saa7134_ir_open;
 761        rc->close = saa7134_ir_close;
 762        if (raw_decode)
 763                rc->driver_type = RC_DRIVER_IR_RAW;
 764
 765        rc->input_name = ir->name;
 766        rc->input_phys = ir->phys;
 767        rc->input_id.bustype = BUS_PCI;
 768        rc->input_id.version = 1;
 769        if (dev->pci->subsystem_vendor) {
 770                rc->input_id.vendor  = dev->pci->subsystem_vendor;
 771                rc->input_id.product = dev->pci->subsystem_device;
 772        } else {
 773                rc->input_id.vendor  = dev->pci->vendor;
 774                rc->input_id.product = dev->pci->device;
 775        }
 776        rc->dev.parent = &dev->pci->dev;
 777        rc->map_name = ir_codes;
 778        rc->driver_name = MODULE_NAME;
 779
 780        err = rc_register_device(rc);
 781        if (err)
 782                goto err_out_free;
 783
 784        return 0;
 785
 786err_out_free:
 787        rc_free_device(rc);
 788        dev->remote = NULL;
 789        kfree(ir);
 790        return err;
 791}
 792
 793void saa7134_input_fini(struct saa7134_dev *dev)
 794{
 795        if (NULL == dev->remote)
 796                return;
 797
 798        saa7134_ir_stop(dev);
 799        rc_unregister_device(dev->remote->dev);
 800        kfree(dev->remote);
 801        dev->remote = NULL;
 802}
 803
 804void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 805{
 806        struct i2c_board_info info;
 807        struct i2c_msg msg_msi = {
 808                .addr = 0x50,
 809                .flags = I2C_M_RD,
 810                .len = 0,
 811                .buf = NULL,
 812        };
 813        int rc;
 814
 815        if (disable_ir) {
 816                dprintk("IR has been disabled, not probing for i2c remote\n");
 817                return;
 818        }
 819
 820        memset(&info, 0, sizeof(struct i2c_board_info));
 821        memset(&dev->init_data, 0, sizeof(dev->init_data));
 822        strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 823
 824        switch (dev->board) {
 825        case SAA7134_BOARD_PINNACLE_PCTV_110i:
 826        case SAA7134_BOARD_PINNACLE_PCTV_310i:
 827                dev->init_data.name = "Pinnacle PCTV";
 828                if (pinnacle_remote == 0) {
 829                        dev->init_data.get_key = get_key_pinnacle_color;
 830                        dev->init_data.ir_codes = RC_MAP_PINNACLE_COLOR;
 831                        info.addr = 0x47;
 832                } else {
 833                        dev->init_data.get_key = get_key_pinnacle_grey;
 834                        dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
 835                        info.addr = 0x47;
 836                }
 837                break;
 838        case SAA7134_BOARD_UPMOST_PURPLE_TV:
 839                dev->init_data.name = "Purple TV";
 840                dev->init_data.get_key = get_key_purpletv;
 841                dev->init_data.ir_codes = RC_MAP_PURPLETV;
 842                info.addr = 0x7a;
 843                break;
 844        case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS:
 845                dev->init_data.name = "MSI TV@nywhere Plus";
 846                dev->init_data.get_key = get_key_msi_tvanywhere_plus;
 847                dev->init_data.ir_codes = RC_MAP_MSI_TVANYWHERE_PLUS;
 848                /*
 849                 * MSI TV@nyware Plus requires more frequent polling
 850                 * otherwise it will miss some keypresses
 851                 */
 852                dev->init_data.polling_interval = 50;
 853                info.addr = 0x30;
 854                /* MSI TV@nywhere Plus controller doesn't seem to
 855                   respond to probes unless we read something from
 856                   an existing device. Weird...
 857                   REVISIT: might no longer be needed */
 858                rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
 859                dprintk("probe 0x%02x @ %s: %s\n",
 860                        msg_msi.addr, dev->i2c_adap.name,
 861                        (1 == rc) ? "yes" : "no");
 862                break;
 863        case SAA7134_BOARD_HAUPPAUGE_HVR1110:
 864                dev->init_data.name = "HVR 1110";
 865                dev->init_data.get_key = get_key_hvr1110;
 866                dev->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW;
 867                info.addr = 0x71;
 868                break;
 869        case SAA7134_BOARD_BEHOLD_607FM_MK3:
 870        case SAA7134_BOARD_BEHOLD_607FM_MK5:
 871        case SAA7134_BOARD_BEHOLD_609FM_MK3:
 872        case SAA7134_BOARD_BEHOLD_609FM_MK5:
 873        case SAA7134_BOARD_BEHOLD_607RDS_MK3:
 874        case SAA7134_BOARD_BEHOLD_607RDS_MK5:
 875        case SAA7134_BOARD_BEHOLD_609RDS_MK3:
 876        case SAA7134_BOARD_BEHOLD_609RDS_MK5:
 877        case SAA7134_BOARD_BEHOLD_M6:
 878        case SAA7134_BOARD_BEHOLD_M63:
 879        case SAA7134_BOARD_BEHOLD_M6_EXTRA:
 880        case SAA7134_BOARD_BEHOLD_H6:
 881        case SAA7134_BOARD_BEHOLD_X7:
 882        case SAA7134_BOARD_BEHOLD_H7:
 883        case SAA7134_BOARD_BEHOLD_A7:
 884                dev->init_data.name = "BeholdTV";
 885                dev->init_data.get_key = get_key_beholdm6xx;
 886                dev->init_data.ir_codes = RC_MAP_BEHOLD;
 887                dev->init_data.type = RC_TYPE_NEC;
 888                info.addr = 0x2d;
 889                break;
 890        case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
 891        case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
 892                info.addr = 0x40;
 893                break;
 894        case SAA7134_BOARD_FLYDVB_TRIO:
 895                dev->init_data.name = "FlyDVB Trio";
 896                dev->init_data.get_key = get_key_flydvb_trio;
 897                dev->init_data.ir_codes = RC_MAP_FLYDVB;
 898                info.addr = 0x0b;
 899                break;
 900        default:
 901                dprintk("No I2C IR support for board %x\n", dev->board);
 902                return;
 903        }
 904
 905        if (dev->init_data.name)
 906                info.platform_data = &dev->init_data;
 907        i2c_new_device(&dev->i2c_adap, &info);
 908}
 909
 910static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 911{
 912        struct saa7134_card_ir *ir = dev->remote;
 913        unsigned long timeout;
 914        int space;
 915
 916        /* Generate initial event */
 917        saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 918        saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 919        space = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
 920        ir_raw_event_store_edge(dev->remote->dev, space ? IR_SPACE : IR_PULSE);
 921
 922        /*
 923         * Wait 15 ms from the start of the first IR event before processing
 924         * the event. This time is enough for NEC protocol. May need adjustments
 925         * to work with other protocols.
 926         */
 927        if (!ir->active) {
 928                timeout = jiffies + jiffies_to_msecs(15);
 929                mod_timer(&ir->timer, timeout);
 930                ir->active = true;
 931        }
 932
 933        return 1;
 934}
 935