#ifndef B43legacy_H_
#define B43legacy_H_

#include <linux/hw_random.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/stringify.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <asm/atomic.h>
#include <linux/io.h>

#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_driver_chipcommon.h>

#include <linux/wireless.h>
#include <net/mac80211.h>

#include "debugfs.h"
#include "leds.h"
#include "rfkill.h"
#include "phy.h"


/* The unique identifier of the firmware that's officially supported by this
 * driver version. */
#define B43legacy_SUPPORTED_FIRMWARE_ID "FW10"

#define B43legacy_IRQWAIT_MAX_RETRIES   20

/* MMIO offsets */
#define B43legacy_MMIO_DMA0_REASON      0x20
#define B43legacy_MMIO_DMA0_IRQ_MASK    0x24
#define B43legacy_MMIO_DMA1_REASON      0x28
#define B43legacy_MMIO_DMA1_IRQ_MASK    0x2C
#define B43legacy_MMIO_DMA2_REASON      0x30
#define B43legacy_MMIO_DMA2_IRQ_MASK    0x34
#define B43legacy_MMIO_DMA3_REASON      0x38
#define B43legacy_MMIO_DMA3_IRQ_MASK    0x3C
#define B43legacy_MMIO_DMA4_REASON      0x40
#define B43legacy_MMIO_DMA4_IRQ_MASK    0x44
#define B43legacy_MMIO_DMA5_REASON      0x48
#define B43legacy_MMIO_DMA5_IRQ_MASK    0x4C
#define B43legacy_MMIO_MACCTL           0x120   /* MAC control */
#define B43legacy_MMIO_MACCMD           0x124   /* MAC command */
#define B43legacy_MMIO_GEN_IRQ_REASON   0x128
#define B43legacy_MMIO_GEN_IRQ_MASK     0x12C
#define B43legacy_MMIO_RAM_CONTROL      0x130
#define B43legacy_MMIO_RAM_DATA         0x134
#define B43legacy_MMIO_PS_STATUS                0x140
#define B43legacy_MMIO_RADIO_HWENABLED_HI       0x158
#define B43legacy_MMIO_SHM_CONTROL      0x160
#define B43legacy_MMIO_SHM_DATA         0x164
#define B43legacy_MMIO_SHM_DATA_UNALIGNED       0x166
#define B43legacy_MMIO_XMITSTAT_0               0x170
#define B43legacy_MMIO_XMITSTAT_1               0x174
#define B43legacy_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */
#define B43legacy_MMIO_REV3PLUS_TSF_HIGH        0x184 /* core rev >= 3 only */
#define B43legacy_MMIO_TSF_CFP_REP      0x188
#define B43legacy_MMIO_TSF_CFP_START    0x18C
/* 32-bit DMA */
#define B43legacy_MMIO_DMA32_BASE0      0x200
#define B43legacy_MMIO_DMA32_BASE1      0x220
#define B43legacy_MMIO_DMA32_BASE2      0x240
#define B43legacy_MMIO_DMA32_BASE3      0x260
#define B43legacy_MMIO_DMA32_BASE4      0x280
#define B43legacy_MMIO_DMA32_BASE5      0x2A0
/* 64-bit DMA */
#define B43legacy_MMIO_DMA64_BASE0      0x200
#define B43legacy_MMIO_DMA64_BASE1      0x240
#define B43legacy_MMIO_DMA64_BASE2      0x280
#define B43legacy_MMIO_DMA64_BASE3      0x2C0
#define B43legacy_MMIO_DMA64_BASE4      0x300
#define B43legacy_MMIO_DMA64_BASE5      0x340
/* PIO */
#define B43legacy_MMIO_PIO1_BASE                0x300
#define B43legacy_MMIO_PIO2_BASE                0x310
#define B43legacy_MMIO_PIO3_BASE                0x320
#define B43legacy_MMIO_PIO4_BASE                0x330

#define B43legacy_MMIO_PHY_VER          0x3E0
#define B43legacy_MMIO_PHY_RADIO                0x3E2
#define B43legacy_MMIO_PHY0             0x3E6
#define B43legacy_MMIO_ANTENNA          0x3E8
#define B43legacy_MMIO_CHANNEL          0x3F0
#define B43legacy_MMIO_CHANNEL_EXT      0x3F4
#define B43legacy_MMIO_RADIO_CONTROL    0x3F6
#define B43legacy_MMIO_RADIO_DATA_HIGH  0x3F8
#define B43legacy_MMIO_RADIO_DATA_LOW   0x3FA
#define B43legacy_MMIO_PHY_CONTROL      0x3FC
#define B43legacy_MMIO_PHY_DATA         0x3FE
#define B43legacy_MMIO_MACFILTER_CONTROL        0x420
#define B43legacy_MMIO_MACFILTER_DATA   0x422
#define B43legacy_MMIO_RCMTA_COUNT      0x43C /* Receive Match Transmitter Addr */
#define B43legacy_MMIO_RADIO_HWENABLED_LO       0x49A
#define B43legacy_MMIO_GPIO_CONTROL     0x49C
#define B43legacy_MMIO_GPIO_MASK                0x49E
#define B43legacy_MMIO_TSF_CFP_PRETBTT  0x612
#define B43legacy_MMIO_TSF_0            0x632 /* core rev < 3 only */
#define B43legacy_MMIO_TSF_1            0x634 /* core rev < 3 only */
#define B43legacy_MMIO_TSF_2            0x636 /* core rev < 3 only */
#define B43legacy_MMIO_TSF_3            0x638 /* core rev < 3 only */
#define B43legacy_MMIO_RNG              0x65A
#define B43legacy_MMIO_POWERUP_DELAY    0x6A8

/* SPROM boardflags_lo values */
#define B43legacy_BFL_PACTRL            0x0002
#define B43legacy_BFL_RSSI              0x0008
#define B43legacy_BFL_EXTLNA            0x1000

/* GPIO register offset, in both ChipCommon and PCI core. */
#define B43legacy_GPIO_CONTROL          0x6c

/* SHM Routing */
#define B43legacy_SHM_SHARED            0x0001
#define B43legacy_SHM_WIRELESS          0x0002
#define B43legacy_SHM_HW                0x0004
#define B43legacy_SHM_UCODE             0x0300

/* SHM Routing modifiers */
#define B43legacy_SHM_AUTOINC_R         0x0200 /* Read Auto-increment */
#define B43legacy_SHM_AUTOINC_W         0x0100 /* Write Auto-increment */
#define B43legacy_SHM_AUTOINC_RW        (B43legacy_SHM_AUTOINC_R | \
                                         B43legacy_SHM_AUTOINC_W)

/* Misc SHM_SHARED offsets */
#define B43legacy_SHM_SH_WLCOREREV      0x0016 /* 802.11 core revision */
#define B43legacy_SHM_SH_HOSTFLO        0x005E /* Hostflags ucode opts (low) */
#define B43legacy_SHM_SH_HOSTFHI        0x0060 /* Hostflags ucode opts (high) */
/* SHM_SHARED crypto engine */
#define B43legacy_SHM_SH_KEYIDXBLOCK    0x05D4 /* Key index/algorithm block */
/* SHM_SHARED beacon/AP variables */
#define B43legacy_SHM_SH_DTIMP          0x0012 /* DTIM period */
#define B43legacy_SHM_SH_BTL0           0x0018 /* Beacon template length 0 */
#define B43legacy_SHM_SH_BTL1           0x001A /* Beacon template length 1 */
#define B43legacy_SHM_SH_BTSFOFF        0x001C /* Beacon TSF offset */
#define B43legacy_SHM_SH_TIMPOS         0x001E /* TIM position in beacon */
#define B43legacy_SHM_SH_BEACPHYCTL     0x0054 /* Beacon PHY TX control word */
/* SHM_SHARED ACK/CTS control */
#define B43legacy_SHM_SH_ACKCTSPHYCTL   0x0022 /* ACK/CTS PHY control word */
/* SHM_SHARED probe response variables */
#define B43legacy_SHM_SH_PRTLEN         0x004A /* Probe Response template length */
#define B43legacy_SHM_SH_PRMAXTIME      0x0074 /* Probe Response max time */
#define B43legacy_SHM_SH_PRPHYCTL       0x0188 /* Probe Resp PHY TX control */
/* SHM_SHARED rate tables */
#define B43legacy_SHM_SH_OFDMDIRECT     0x0480 /* Pointer to OFDM direct map */
#define B43legacy_SHM_SH_OFDMBASIC      0x04A0 /* Pointer to OFDM basic rate map */
#define B43legacy_SHM_SH_CCKDIRECT      0x04C0 /* Pointer to CCK direct map */
#define B43legacy_SHM_SH_CCKBASIC       0x04E0 /* Pointer to CCK basic rate map */
/* SHM_SHARED microcode soft registers */
#define B43legacy_SHM_SH_UCODEREV       0x0000 /* Microcode revision */
#define B43legacy_SHM_SH_UCODEPATCH     0x0002 /* Microcode patchlevel */
#define B43legacy_SHM_SH_UCODEDATE      0x0004 /* Microcode date */
#define B43legacy_SHM_SH_UCODETIME      0x0006 /* Microcode time */
#define B43legacy_SHM_SH_SPUWKUP        0x0094 /* pre-wakeup for synth PU in us */
#define B43legacy_SHM_SH_PRETBTT        0x0096 /* pre-TBTT in us */

#define B43legacy_UCODEFLAGS_OFFSET     0x005E

/* Hardware Radio Enable masks */
#define B43legacy_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
#define B43legacy_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)

/* HostFlags. See b43legacy_hf_read/write() */
#define B43legacy_HF_SYMW               0x00000002 /* G-PHY SYM workaround */
#define B43legacy_HF_GDCW               0x00000020 /* G-PHY DV cancel filter */
#define B43legacy_HF_OFDMPABOOST        0x00000040 /* Enable PA boost OFDM */
#define B43legacy_HF_EDCF               0x00000100 /* on if WME/MAC suspended */

/* MacFilter offsets. */
#define B43legacy_MACFILTER_SELF        0x0000
#define B43legacy_MACFILTER_BSSID       0x0003
#define B43legacy_MACFILTER_MAC         0x0010

/* PHYVersioning */
#define B43legacy_PHYTYPE_B             0x01
#define B43legacy_PHYTYPE_G             0x02

/* PHYRegisters */
#define B43legacy_PHY_G_LO_CONTROL      0x0810
#define B43legacy_PHY_ILT_G_CTRL        0x0472
#define B43legacy_PHY_ILT_G_DATA1       0x0473
#define B43legacy_PHY_ILT_G_DATA2       0x0474
#define B43legacy_PHY_G_PCTL            0x0029
#define B43legacy_PHY_RADIO_BITFIELD    0x0401
#define B43legacy_PHY_G_CRS             0x0429
#define B43legacy_PHY_NRSSILT_CTRL      0x0803
#define B43legacy_PHY_NRSSILT_DATA      0x0804

/* RadioRegisters */
#define B43legacy_RADIOCTL_ID           0x01

/* MAC Control bitfield */
#define B43legacy_MACCTL_ENABLED        0x00000001 /* MAC Enabled */
#define B43legacy_MACCTL_PSM_RUN        0x00000002 /* Run Microcode */
#define B43legacy_MACCTL_PSM_JMP0       0x00000004 /* Microcode jump to 0 */
#define B43legacy_MACCTL_SHM_ENABLED    0x00000100 /* SHM Enabled */
#define B43legacy_MACCTL_IHR_ENABLED    0x00000400 /* IHR Region Enabled */
#define B43legacy_MACCTL_BE             0x00010000 /* Big Endian mode */
#define B43legacy_MACCTL_INFRA          0x00020000 /* Infrastructure mode */
#define B43legacy_MACCTL_AP             0x00040000 /* AccessPoint mode */
#define B43legacy_MACCTL_RADIOLOCK      0x00080000 /* Radio lock */
#define B43legacy_MACCTL_BEACPROMISC    0x00100000 /* Beacon Promiscuous */
#define B43legacy_MACCTL_KEEP_BADPLCP   0x00200000 /* Keep bad PLCP frames */
#define B43legacy_MACCTL_KEEP_CTL       0x00400000 /* Keep control frames */
#define B43legacy_MACCTL_KEEP_BAD       0x00800000 /* Keep bad frames (FCS) */
#define B43legacy_MACCTL_PROMISC        0x01000000 /* Promiscuous mode */
#define B43legacy_MACCTL_HWPS           0x02000000 /* Hardware Power Saving */
#define B43legacy_MACCTL_AWAKE          0x04000000 /* Device is awake */
#define B43legacy_MACCTL_TBTTHOLD       0x10000000 /* TBTT Hold */
#define B43legacy_MACCTL_GMODE          0x80000000 /* G Mode */

/* MAC Command bitfield */
#define B43legacy_MACCMD_BEACON0_VALID  0x00000001 /* Beacon 0 in template RAM is busy/valid */
#define B43legacy_MACCMD_BEACON1_VALID  0x00000002 /* Beacon 1 in template RAM is busy/valid */
#define B43legacy_MACCMD_DFQ_VALID      0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */
#define B43legacy_MACCMD_CCA            0x00000008 /* Clear channel assessment */
#define B43legacy_MACCMD_BGNOISE        0x00000010 /* Background noise */

/* 802.11 core specific TM State Low flags */
#define B43legacy_TMSLOW_GMODE          0x20000000 /* G Mode Enable */
#define B43legacy_TMSLOW_PLLREFSEL      0x00200000 /* PLL Freq Ref Select */
#define B43legacy_TMSLOW_MACPHYCLKEN    0x00100000 /* MAC PHY Clock Ctrl Enbl */
#define B43legacy_TMSLOW_PHYRESET       0x00080000 /* PHY Reset */
#define B43legacy_TMSLOW_PHYCLKEN       0x00040000 /* PHY Clock Enable */

/* 802.11 core specific TM State High flags */
#define B43legacy_TMSHIGH_FCLOCK        0x00040000 /* Fast Clock Available */
#define B43legacy_TMSHIGH_GPHY          0x00010000 /* G-PHY avail (rev >= 5) */

#define B43legacy_UCODEFLAG_AUTODIV       0x0001

/* Generic-Interrupt reasons. */
#define B43legacy_IRQ_MAC_SUSPENDED     0x00000001
#define B43legacy_IRQ_BEACON            0x00000002
#define B43legacy_IRQ_TBTT_INDI         0x00000004 /* Target Beacon Transmit Time */
#define B43legacy_IRQ_BEACON_TX_OK      0x00000008
#define B43legacy_IRQ_BEACON_CANCEL     0x00000010
#define B43legacy_IRQ_ATIM_END          0x00000020
#define B43legacy_IRQ_PMQ               0x00000040
#define B43legacy_IRQ_PIO_WORKAROUND    0x00000100
#define B43legacy_IRQ_MAC_TXERR         0x00000200
#define B43legacy_IRQ_PHY_TXERR         0x00000800
#define B43legacy_IRQ_PMEVENT           0x00001000
#define B43legacy_IRQ_TIMER0            0x00002000
#define B43legacy_IRQ_TIMER1            0x00004000
#define B43legacy_IRQ_DMA               0x00008000
#define B43legacy_IRQ_TXFIFO_FLUSH_OK   0x00010000
#define B43legacy_IRQ_CCA_MEASURE_OK    0x00020000
#define B43legacy_IRQ_NOISESAMPLE_OK    0x00040000
#define B43legacy_IRQ_UCODE_DEBUG       0x08000000
#define B43legacy_IRQ_RFKILL            0x10000000
#define B43legacy_IRQ_TX_OK             0x20000000
#define B43legacy_IRQ_PHY_G_CHANGED     0x40000000
#define B43legacy_IRQ_TIMEOUT           0x80000000

#define B43legacy_IRQ_ALL               0xFFFFFFFF
#define B43legacy_IRQ_MASKTEMPLATE      (B43legacy_IRQ_MAC_SUSPENDED |  \
                                         B43legacy_IRQ_TBTT_INDI |      \
                                         B43legacy_IRQ_ATIM_END |       \
                                         B43legacy_IRQ_PMQ |            \
                                         B43legacy_IRQ_MAC_TXERR |      \
                                         B43legacy_IRQ_PHY_TXERR |      \
                                         B43legacy_IRQ_DMA |            \
                                         B43legacy_IRQ_TXFIFO_FLUSH_OK | \
                                         B43legacy_IRQ_NOISESAMPLE_OK | \
                                         B43legacy_IRQ_UCODE_DEBUG |    \
                                         B43legacy_IRQ_RFKILL |         \
                                         B43legacy_IRQ_TX_OK)

/* Device specific rate values.
 * The actual values defined here are (rate_in_mbps * 2).
 * Some code depends on this. Don't change it. */
#define B43legacy_CCK_RATE_1MB          2
#define B43legacy_CCK_RATE_2MB          4
#define B43legacy_CCK_RATE_5MB          11
#define B43legacy_CCK_RATE_11MB         22
#define B43legacy_OFDM_RATE_6MB         12
#define B43legacy_OFDM_RATE_9MB         18
#define B43legacy_OFDM_RATE_12MB        24
#define B43legacy_OFDM_RATE_18MB        36
#define B43legacy_OFDM_RATE_24MB        48
#define B43legacy_OFDM_RATE_36MB        72
#define B43legacy_OFDM_RATE_48MB        96
#define B43legacy_OFDM_RATE_54MB        108
/* Convert a b43legacy rate value to a rate in 100kbps */
#define B43legacy_RATE_TO_100KBPS(rate) (((rate) * 10) / 2)


#define B43legacy_DEFAULT_SHORT_RETRY_LIMIT     7
#define B43legacy_DEFAULT_LONG_RETRY_LIMIT      4

#define B43legacy_PHY_TX_BADNESS_LIMIT          1000

/* Max size of a security key */
#define B43legacy_SEC_KEYSIZE           16
/* Security algorithms. */
enum {
        B43legacy_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
        B43legacy_SEC_ALGO_WEP40,
        B43legacy_SEC_ALGO_TKIP,
        B43legacy_SEC_ALGO_AES,
        B43legacy_SEC_ALGO_WEP104,
        B43legacy_SEC_ALGO_AES_LEGACY,
};

/* Core Information Registers */
#define B43legacy_CIR_BASE                0xf00
#define B43legacy_CIR_SBTPSFLAG           (B43legacy_CIR_BASE + 0x18)
#define B43legacy_CIR_SBIMSTATE           (B43legacy_CIR_BASE + 0x90)
#define B43legacy_CIR_SBINTVEC            (B43legacy_CIR_BASE + 0x94)
#define B43legacy_CIR_SBTMSTATELOW        (B43legacy_CIR_BASE + 0x98)
#define B43legacy_CIR_SBTMSTATEHIGH       (B43legacy_CIR_BASE + 0x9c)
#define B43legacy_CIR_SBIMCONFIGLOW       (B43legacy_CIR_BASE + 0xa8)
#define B43legacy_CIR_SB_ID_HI            (B43legacy_CIR_BASE + 0xfc)

/* sbtmstatehigh state flags */
#define B43legacy_SBTMSTATEHIGH_SERROR          0x00000001
#define B43legacy_SBTMSTATEHIGH_BUSY            0x00000004
#define B43legacy_SBTMSTATEHIGH_TIMEOUT         0x00000020
#define B43legacy_SBTMSTATEHIGH_G_PHY_AVAIL     0x00010000
#define B43legacy_SBTMSTATEHIGH_COREFLAGS       0x1FFF0000
#define B43legacy_SBTMSTATEHIGH_DMA64BIT        0x10000000
#define B43legacy_SBTMSTATEHIGH_GATEDCLK        0x20000000
#define B43legacy_SBTMSTATEHIGH_BISTFAILED      0x40000000
#define B43legacy_SBTMSTATEHIGH_BISTCOMPLETE    0x80000000

/* sbimstate flags */
#define B43legacy_SBIMSTATE_IB_ERROR            0x20000
#define B43legacy_SBIMSTATE_TIMEOUT             0x40000

#define PFX             KBUILD_MODNAME ": "
#ifdef assert
# undef assert
#endif
#ifdef CONFIG_B43LEGACY_DEBUG
# define B43legacy_WARN_ON(x)   WARN_ON(x)
# define B43legacy_BUG_ON(expr)                                         \
        do {                                                            \
                if (unlikely((expr))) {                                 \
                        printk(KERN_INFO PFX "Test (%s) failed\n",      \
                                              #expr);                   \
                        BUG_ON(expr);                                   \
                }                                                       \
        } while (0)
# define B43legacy_DEBUG        1
#else
/* This will evaluate the argument even if debugging is disabled. */
static inline bool __b43legacy_warn_on_dummy(bool x) { return x; }
# define B43legacy_WARN_ON(x)   __b43legacy_warn_on_dummy(unlikely(!!(x)))
# define B43legacy_BUG_ON(x)    do { /* nothing */ } while (0)
# define B43legacy_DEBUG        0
#endif


struct net_device;
struct pci_dev;
struct b43legacy_dmaring;
struct b43legacy_pioqueue;

/* The firmware file header */
#define B43legacy_FW_TYPE_UCODE 'u'
#define B43legacy_FW_TYPE_PCM   'p'
#define B43legacy_FW_TYPE_IV    'i'
struct b43legacy_fw_header {
        /* File type */
        u8 type;
        /* File format version */
        u8 ver;
        u8 __padding[2];
        /* Size of the data. For ucode and PCM this is in bytes.
         * For IV this is number-of-ivs. */
        __be32 size;
} __packed;

/* Initial Value file format */
#define B43legacy_IV_OFFSET_MASK        0x7FFF
#define B43legacy_IV_32BIT              0x8000
struct b43legacy_iv {
        __be16 offset_size;
        union {
                __be16 d16;
                __be32 d32;
        } data __packed;
} __packed;

#define B43legacy_PHYMODE(phytype)      (1 << (phytype))
#define B43legacy_PHYMODE_B             B43legacy_PHYMODE       \
                                        ((B43legacy_PHYTYPE_B))
#define B43legacy_PHYMODE_G             B43legacy_PHYMODE       \
                                        ((B43legacy_PHYTYPE_G))

/* Value pair to measure the LocalOscillator. */
struct b43legacy_lopair {
        s8 low;
        s8 high;
        u8 used:1;
};
#define B43legacy_LO_COUNT      (14*4)

struct b43legacy_phy {
        /* Possible PHYMODEs on this PHY */
        u8 possible_phymodes;
        /* GMODE bit enabled in MACCTL? */
        bool gmode;

        /* Analog Type */
        u8 analog;
        /* B43legacy_PHYTYPE_ */
        u8 type;
        /* PHY revision number. */
        u8 rev;

        u16 antenna_diversity;
        u16 savedpctlreg;
        /* Radio versioning */
        u16 radio_manuf;        /* Radio manufacturer */
        u16 radio_ver;          /* Radio version */
        u8 calibrated:1;
        u8 radio_rev;           /* Radio revision */

        bool dyn_tssi_tbl;      /* tssi2dbm is kmalloc()ed. */

        /* ACI (adjacent channel interference) flags. */
        bool aci_enable;
        bool aci_wlan_automatic;
        bool aci_hw_rssi;

        /* Radio switched on/off */
        bool radio_on;
        struct {
                /* Values saved when turning the radio off.
                 * They are needed when turning it on again. */
                bool valid;
                u16 rfover;
                u16 rfoverval;
        } radio_off_context;

        u16 minlowsig[2];
        u16 minlowsigpos[2];

        /* LO Measurement Data.
         * Use b43legacy_get_lopair() to get a value.
         */
        struct b43legacy_lopair *_lo_pairs;
        /* TSSI to dBm table in use */
        const s8 *tssi2dbm;
        /* idle TSSI value */
        s8 idle_tssi;
        /* Target idle TSSI */
        int tgt_idle_tssi;
        /* Current idle TSSI */
        int cur_idle_tssi;

        /* LocalOscillator control values. */
        struct b43legacy_txpower_lo_control *lo_control;
        /* Values from b43legacy_calc_loopback_gain() */
        s16 max_lb_gain;        /* Maximum Loopback gain in hdB */
        s16 trsw_rx_gain;       /* TRSW RX gain in hdB */
        s16 lna_lod_gain;       /* LNA lod */
        s16 lna_gain;           /* LNA */
        s16 pga_gain;           /* PGA */

        /* Desired TX power level (in dBm). This is set by the user and
         * adjusted in b43legacy_phy_xmitpower(). */
        u8 power_level;

        /* Values from b43legacy_calc_loopback_gain() */
        u16 loopback_gain[2];

        /* TX Power control values. */
        /* B/G PHY */
        struct {
                /* Current Radio Attenuation for TXpower recalculation. */
                u16 rfatt;
                /* Current Baseband Attenuation for TXpower recalculation. */
                u16 bbatt;
                /* Current TXpower control value for TXpower recalculation. */
                u16 txctl1;
                u16 txctl2;
        };
        /* A PHY */
        struct {
                u16 txpwr_offset;
        };

        /* Current Interference Mitigation mode */
        int interfmode;
        /* Stack of saved values from the Interference Mitigation code.
         * Each value in the stack is layed out as follows:
         * bit 0-11:  offset
         * bit 12-15: register ID
         * bit 16-32: value
         * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
         */
#define B43legacy_INTERFSTACK_SIZE      26
        u32 interfstack[B43legacy_INTERFSTACK_SIZE];

        /* Saved values from the NRSSI Slope calculation */
        s16 nrssi[2];
        s32 nrssislope;
        /* In memory nrssi lookup table. */
        s8 nrssi_lt[64];

        /* current channel */
        u8 channel;

        u16 lofcal;

        u16 initval;

        /* PHY TX errors counter. */
        atomic_t txerr_cnt;

#if B43legacy_DEBUG
        /* Manual TX-power control enabled? */
        bool manual_txpower_control;
        /* PHY registers locked by b43legacy_phy_lock()? */
        bool phy_locked;
#endif /* B43legacy_DEBUG */
};

/* Data structures for DMA transmission, per 80211 core. */
struct b43legacy_dma {
        struct b43legacy_dmaring *tx_ring0;
        struct b43legacy_dmaring *tx_ring1;
        struct b43legacy_dmaring *tx_ring2;
        struct b43legacy_dmaring *tx_ring3;
        struct b43legacy_dmaring *tx_ring4;
        struct b43legacy_dmaring *tx_ring5;

        struct b43legacy_dmaring *rx_ring0;
        struct b43legacy_dmaring *rx_ring3; /* only on core.rev < 5 */
};

/* Data structures for PIO transmission, per 80211 core. */
struct b43legacy_pio {
        struct b43legacy_pioqueue *queue0;
        struct b43legacy_pioqueue *queue1;
        struct b43legacy_pioqueue *queue2;
        struct b43legacy_pioqueue *queue3;
};

/* Context information for a noise calculation (Link Quality). */
struct b43legacy_noise_calculation {
        u8 channel_at_start;
        bool calculation_running;
        u8 nr_samples;
        s8 samples[8][4];
};

struct b43legacy_stats {
        u8 link_noise;
        /* Store the last TX/RX times here for updating the leds. */
        unsigned long last_tx;
        unsigned long last_rx;
};

struct b43legacy_key {
        void *keyconf;
        bool enabled;
        u8 algorithm;
};

struct b43legacy_wldev;

/* Data structure for the WLAN parts (802.11 cores) of the b43legacy chip. */
struct b43legacy_wl {
        /* Pointer to the active wireless device on this chip */
        struct b43legacy_wldev *current_dev;
        /* Pointer to the ieee80211 hardware data structure */
        struct ieee80211_hw *hw;

        spinlock_t irq_lock;            /* locks IRQ */
        struct mutex mutex;             /* locks wireless core state */
        spinlock_t leds_lock;           /* lock for leds */

        /* We can only have one operating interface (802.11 core)
         * at a time. General information about this interface follows.
         */

        struct ieee80211_vif *vif;
        /* MAC address (can be NULL). */
        u8 mac_addr[ETH_ALEN];
        /* Current BSSID (can be NULL). */
        u8 bssid[ETH_ALEN];
        /* Interface type. (IEEE80211_IF_TYPE_XXX) */
        int if_type;
        /* Is the card operating in AP, STA or IBSS mode? */
        bool operating;
        /* filter flags */
        unsigned int filter_flags;
        /* Stats about the wireless interface */
        struct ieee80211_low_level_stats ieee_stats;

#ifdef CONFIG_B43LEGACY_HWRNG
        struct hwrng rng;
        u8 rng_initialized;
        char rng_name[30 + 1];
#endif

        /* List of all wireless devices on this chip */
        struct list_head devlist;
        u8 nr_devs;

        bool radiotap_enabled;
        bool radio_enabled;

        /* The beacon we are currently using (AP or IBSS mode).
         * This beacon stuff is protected by the irq_lock. */
        struct sk_buff *current_beacon;
        bool beacon0_uploaded;
        bool beacon1_uploaded;
        bool beacon_templates_virgin; /* Never wrote the templates? */
        struct work_struct beacon_update_trigger;
};

/* Pointers to the firmware data and meta information about it. */
struct b43legacy_firmware {
        /* Microcode */
        const struct firmware *ucode;
        /* PCM code */
        const struct firmware *pcm;
        /* Initial MMIO values for the firmware */
        const struct firmware *initvals;
        /* Initial MMIO values for the firmware, band-specific */
        const struct firmware *initvals_band;
        /* Firmware revision */
        u16 rev;
        /* Firmware patchlevel */
        u16 patch;
};

/* Device (802.11 core) initialization status. */
enum {
        B43legacy_STAT_UNINIT           = 0, /* Uninitialized. */
        B43legacy_STAT_INITIALIZED      = 1, /* Initialized, not yet started. */
        B43legacy_STAT_STARTED  = 2, /* Up and running. */
};
#define b43legacy_status(wldev) atomic_read(&(wldev)->__init_status)
#define b43legacy_set_status(wldev, stat)       do {            \
                atomic_set(&(wldev)->__init_status, (stat));    \
                smp_wmb();                                      \
                                        } while (0)

/* *** ---   HOW LOCKING WORKS IN B43legacy   --- ***
 *
 * You should always acquire both, wl->mutex and wl->irq_lock unless:
 * - You don't need to acquire wl->irq_lock, if the interface is stopped.
 * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet
 *   and packet TX path (and _ONLY_ there.)
 */

/* Data structure for one wireless device (802.11 core) */
struct b43legacy_wldev {
        struct ssb_device *dev;
        struct b43legacy_wl *wl;

        /* The device initialization status.
         * Use b43legacy_status() to query. */
        atomic_t __init_status;
        /* Saved init status for handling suspend. */
        int suspend_init_status;

        bool __using_pio;       /* Using pio rather than dma. */
        bool bad_frames_preempt;/* Use "Bad Frames Preemption". */
        bool dfq_valid;         /* Directed frame queue valid (IBSS PS mode, ATIM). */
        bool short_preamble;    /* TRUE if using short preamble. */
        bool radio_hw_enable;   /* State of radio hardware enable bit. */

        /* PHY/Radio device. */
        struct b43legacy_phy phy;
        union {
                /* DMA engines. */
                struct b43legacy_dma dma;
                /* PIO engines. */
                struct b43legacy_pio pio;
        };

        /* Various statistics about the physical device. */
        struct b43legacy_stats stats;

        /* The device LEDs. */
        struct b43legacy_led led_tx;
        struct b43legacy_led led_rx;
        struct b43legacy_led led_assoc;
        struct b43legacy_led led_radio;

        /* Reason code of the last interrupt. */
        u32 irq_reason;
        u32 dma_reason[6];
        /* The currently active generic-interrupt mask. */
        u32 irq_mask;
        /* Link Quality calculation context. */
        struct b43legacy_noise_calculation noisecalc;
        /* if > 0 MAC is suspended. if == 0 MAC is enabled. */
        int mac_suspended;

        /* Interrupt Service Routine tasklet (bottom-half) */
        struct tasklet_struct isr_tasklet;

        /* Periodic tasks */
        struct delayed_work periodic_work;
        unsigned int periodic_state;

        struct work_struct restart_work;

        /* encryption/decryption */
        u16 ktp; /* Key table pointer */
        u8 max_nr_keys;
        struct b43legacy_key key[58];

        /* Firmware data */
        struct b43legacy_firmware fw;

        /* Devicelist in struct b43legacy_wl (all 802.11 cores) */
        struct list_head list;

        /* Debugging stuff follows. */
#ifdef CONFIG_B43LEGACY_DEBUG
        struct b43legacy_dfsentry *dfsentry;
#endif
};


static inline
struct b43legacy_wl *hw_to_b43legacy_wl(struct ieee80211_hw *hw)
{
        return hw->priv;
}

/* Helper function, which returns a boolean.
 * TRUE, if PIO is used; FALSE, if DMA is used.
 */
#if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
static inline
int b43legacy_using_pio(struct b43legacy_wldev *dev)
{
        return dev->__using_pio;
}
#elif defined(CONFIG_B43LEGACY_DMA)
static inline
int b43legacy_using_pio(struct b43legacy_wldev *dev)
{
        return 0;
}
#elif defined(CONFIG_B43LEGACY_PIO)
static inline
int b43legacy_using_pio(struct b43legacy_wldev *dev)
{
        return 1;
}
#else
# error "Using neither DMA nor PIO? Confused..."
#endif


static inline
struct b43legacy_wldev *dev_to_b43legacy_wldev(struct device *dev)
{
        struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
        return ssb_get_drvdata(ssb_dev);
}

/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */
static inline
int b43legacy_is_mode(struct b43legacy_wl *wl, int type)
{
        return (wl->operating &&
                wl->if_type == type);
}

static inline
bool is_bcm_board_vendor(struct b43legacy_wldev *dev)
{
        return  (dev->dev->bus->boardinfo.vendor == PCI_VENDOR_ID_BROADCOM);
}

static inline
u16 b43legacy_read16(struct b43legacy_wldev *dev, u16 offset)
{
        return ssb_read16(dev->dev, offset);
}

static inline
void b43legacy_write16(struct b43legacy_wldev *dev, u16 offset, u16 value)
{
        ssb_write16(dev->dev, offset, value);
}

static inline
u32 b43legacy_read32(struct b43legacy_wldev *dev, u16 offset)
{
        return ssb_read32(dev->dev, offset);
}

static inline
void b43legacy_write32(struct b43legacy_wldev *dev, u16 offset, u32 value)
{
        ssb_write32(dev->dev, offset, value);
}

static inline
struct b43legacy_lopair *b43legacy_get_lopair(struct b43legacy_phy *phy,
                                              u16 radio_attenuation,
                                              u16 baseband_attenuation)
{
        return phy->_lo_pairs + (radio_attenuation
                        + 14 * (baseband_attenuation / 2));
}



/* Message printing */
void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...)
                __attribute__((format(printf, 2, 3)));
void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...)
                __attribute__((format(printf, 2, 3)));
void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...)
                __attribute__((format(printf, 2, 3)));
#if B43legacy_DEBUG
void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...)
                __attribute__((format(printf, 2, 3)));
#else /* DEBUG */
# define b43legacydbg(wl, fmt...) do { /* nothing */ } while (0)
#endif /* DEBUG */

/* Macros for printing a value in Q5.2 format */
#define Q52_FMT         "%u.%u"
#define Q52_ARG(q52)    ((q52) / 4), (((q52) & 3) * 100 / 4)

#endif /* B43legacy_H_ */