linux/drivers/net/wireless/libertas/host.h
<<
>>
Prefs
   1/**
   2  * This file function prototypes, data structure
   3  * and  definitions for all the host/station commands
   4  */
   5
   6#ifndef _LBS_HOST_H_
   7#define _LBS_HOST_H_
   8
   9#include "types.h"
  10#include "defs.h"
  11
  12#define DEFAULT_AD_HOC_CHANNEL                  6
  13
  14#define CMD_OPTION_WAITFORRSP                   0x0002
  15
  16/** Host command IDs */
  17
  18/* Return command are almost always the same as the host command, but with
  19 * bit 15 set high.  There are a few exceptions, though...
  20 */
  21#define CMD_RET(cmd)                            (0x8000 | cmd)
  22
  23/* Return command convention exceptions: */
  24#define CMD_RET_802_11_ASSOCIATE                0x8012
  25
  26/* Command codes */
  27#define CMD_GET_HW_SPEC                         0x0003
  28#define CMD_EEPROM_UPDATE                       0x0004
  29#define CMD_802_11_RESET                        0x0005
  30#define CMD_802_11_SCAN                         0x0006
  31#define CMD_802_11_GET_LOG                      0x000b
  32#define CMD_MAC_MULTICAST_ADR                   0x0010
  33#define CMD_802_11_AUTHENTICATE                 0x0011
  34#define CMD_802_11_EEPROM_ACCESS                0x0059
  35#define CMD_802_11_ASSOCIATE                    0x0050
  36#define CMD_802_11_SET_WEP                      0x0013
  37#define CMD_802_11_GET_STAT                     0x0014
  38#define CMD_802_3_GET_STAT                      0x0015
  39#define CMD_802_11_SNMP_MIB                     0x0016
  40#define CMD_MAC_REG_MAP                         0x0017
  41#define CMD_BBP_REG_MAP                         0x0018
  42#define CMD_MAC_REG_ACCESS                      0x0019
  43#define CMD_BBP_REG_ACCESS                      0x001a
  44#define CMD_RF_REG_ACCESS                       0x001b
  45#define CMD_802_11_RADIO_CONTROL                0x001c
  46#define CMD_802_11_RF_CHANNEL                   0x001d
  47#define CMD_802_11_RF_TX_POWER                  0x001e
  48#define CMD_802_11_RSSI                         0x001f
  49#define CMD_802_11_RF_ANTENNA                   0x0020
  50#define CMD_802_11_PS_MODE                      0x0021
  51#define CMD_802_11_DATA_RATE                    0x0022
  52#define CMD_RF_REG_MAP                          0x0023
  53#define CMD_802_11_DEAUTHENTICATE               0x0024
  54#define CMD_802_11_REASSOCIATE                  0x0025
  55#define CMD_MAC_CONTROL                         0x0028
  56#define CMD_802_11_AD_HOC_START                 0x002b
  57#define CMD_802_11_AD_HOC_JOIN                  0x002c
  58#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
  59#define CMD_802_11_ENABLE_RSN                   0x002f
  60#define CMD_802_11_SET_AFC                      0x003c
  61#define CMD_802_11_GET_AFC                      0x003d
  62#define CMD_802_11_DEEP_SLEEP                   0x003e
  63#define CMD_802_11_AD_HOC_STOP                  0x0040
  64#define CMD_802_11_HOST_SLEEP_CFG               0x0043
  65#define CMD_802_11_WAKEUP_CONFIRM               0x0044
  66#define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
  67#define CMD_802_11_BEACON_STOP                  0x0049
  68#define CMD_802_11_MAC_ADDRESS                  0x004d
  69#define CMD_802_11_LED_GPIO_CTRL                0x004e
  70#define CMD_802_11_EEPROM_ACCESS                0x0059
  71#define CMD_802_11_BAND_CONFIG                  0x0058
  72#define CMD_GSPI_BUS_CONFIG                     0x005a
  73#define CMD_802_11D_DOMAIN_INFO                 0x005b
  74#define CMD_802_11_KEY_MATERIAL                 0x005e
  75#define CMD_802_11_SLEEP_PARAMS                 0x0066
  76#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
  77#define CMD_802_11_SLEEP_PERIOD                 0x0068
  78#define CMD_802_11_TPC_CFG                      0x0072
  79#define CMD_802_11_PA_CFG                       0x0073
  80#define CMD_802_11_FW_WAKE_METHOD               0x0074
  81#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
  82#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
  83#define CMD_802_11_TX_RATE_QUERY                0x007f
  84#define CMD_GET_TSF                             0x0080
  85#define CMD_BT_ACCESS                           0x0087
  86#define CMD_FWT_ACCESS                          0x0095
  87#define CMD_802_11_MONITOR_MODE                 0x0098
  88#define CMD_MESH_ACCESS                         0x009b
  89#define CMD_MESH_CONFIG_OLD                     0x00a3
  90#define CMD_MESH_CONFIG                         0x00ac
  91#define CMD_SET_BOOT2_VER                       0x00a5
  92#define CMD_FUNC_INIT                           0x00a9
  93#define CMD_FUNC_SHUTDOWN                       0x00aa
  94#define CMD_802_11_BEACON_CTRL                  0x00b0
  95
  96/* For the IEEE Power Save */
  97#define PS_MODE_ACTION_ENTER_PS                 0x0030
  98#define PS_MODE_ACTION_EXIT_PS                  0x0031
  99#define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
 100
 101#define CMD_ENABLE_RSN                          0x0001
 102#define CMD_DISABLE_RSN                         0x0000
 103
 104#define CMD_ACT_GET                             0x0000
 105#define CMD_ACT_SET                             0x0001
 106
 107/* Define action or option for CMD_802_11_SET_WEP */
 108#define CMD_ACT_ADD                             0x0002
 109#define CMD_ACT_REMOVE                          0x0004
 110
 111#define CMD_TYPE_WEP_40_BIT                     0x01
 112#define CMD_TYPE_WEP_104_BIT                    0x02
 113
 114#define CMD_NUM_OF_WEP_KEYS                     4
 115
 116#define CMD_WEP_KEY_INDEX_MASK                  0x3fff
 117
 118/* Define action or option for CMD_802_11_SCAN */
 119#define CMD_BSS_TYPE_BSS                        0x0001
 120#define CMD_BSS_TYPE_IBSS                       0x0002
 121#define CMD_BSS_TYPE_ANY                        0x0003
 122
 123/* Define action or option for CMD_802_11_SCAN */
 124#define CMD_SCAN_TYPE_ACTIVE                    0x0000
 125#define CMD_SCAN_TYPE_PASSIVE                   0x0001
 126
 127#define CMD_SCAN_RADIO_TYPE_BG                  0
 128
 129#define CMD_SCAN_PROBE_DELAY_TIME               0
 130
 131/* Define action or option for CMD_MAC_CONTROL */
 132#define CMD_ACT_MAC_RX_ON                       0x0001
 133#define CMD_ACT_MAC_TX_ON                       0x0002
 134#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
 135#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
 136#define CMD_ACT_MAC_INT_ENABLE                  0x0010
 137#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
 138#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
 139#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
 140#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
 141#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
 142
 143/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
 144#define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
 145#define CMD_SUBSCRIBE_SNR_LOW                   0x0002
 146#define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
 147#define CMD_SUBSCRIBE_BCNMISS                   0x0008
 148#define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
 149#define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
 150
 151#define RADIO_PREAMBLE_LONG                     0x00
 152#define RADIO_PREAMBLE_SHORT                    0x02
 153#define RADIO_PREAMBLE_AUTO                     0x04
 154
 155/* Define action or option for CMD_802_11_RF_CHANNEL */
 156#define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
 157#define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
 158
 159/* Define action or option for CMD_802_11_DATA_RATE */
 160#define CMD_ACT_SET_TX_AUTO                     0x0000
 161#define CMD_ACT_SET_TX_FIX_RATE                 0x0001
 162#define CMD_ACT_GET_TX_RATE                     0x0002
 163
 164/* Options for CMD_802_11_FW_WAKE_METHOD */
 165#define CMD_WAKE_METHOD_UNCHANGED               0x0000
 166#define CMD_WAKE_METHOD_COMMAND_INT             0x0001
 167#define CMD_WAKE_METHOD_GPIO                    0x0002
 168
 169/* Object IDs for CMD_802_11_SNMP_MIB */
 170#define SNMP_MIB_OID_BSS_TYPE                   0x0000
 171#define SNMP_MIB_OID_OP_RATE_SET                0x0001
 172#define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
 173#define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
 174#define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
 175#define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
 176#define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
 177#define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
 178#define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
 179#define SNMP_MIB_OID_11D_ENABLE                 0x0009
 180#define SNMP_MIB_OID_11H_ENABLE                 0x000A
 181
 182/* Define action or option for CMD_BT_ACCESS */
 183enum cmd_bt_access_opts {
 184        /* The bt commands start at 5 instead of 1 because the old dft commands
 185         * are mapped to 1-4.  These old commands are no longer maintained and
 186         * should not be called.
 187         */
 188        CMD_ACT_BT_ACCESS_ADD = 5,
 189        CMD_ACT_BT_ACCESS_DEL,
 190        CMD_ACT_BT_ACCESS_LIST,
 191        CMD_ACT_BT_ACCESS_RESET,
 192        CMD_ACT_BT_ACCESS_SET_INVERT,
 193        CMD_ACT_BT_ACCESS_GET_INVERT
 194};
 195
 196/* Define action or option for CMD_FWT_ACCESS */
 197enum cmd_fwt_access_opts {
 198        CMD_ACT_FWT_ACCESS_ADD = 1,
 199        CMD_ACT_FWT_ACCESS_DEL,
 200        CMD_ACT_FWT_ACCESS_LOOKUP,
 201        CMD_ACT_FWT_ACCESS_LIST,
 202        CMD_ACT_FWT_ACCESS_LIST_ROUTE,
 203        CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
 204        CMD_ACT_FWT_ACCESS_RESET,
 205        CMD_ACT_FWT_ACCESS_CLEANUP,
 206        CMD_ACT_FWT_ACCESS_TIME,
 207};
 208
 209/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
 210enum cmd_wol_cfg_opts {
 211        CMD_ACT_ACTION_NONE = 0,
 212        CMD_ACT_SET_WOL_RULE,
 213        CMD_ACT_GET_WOL_RULE,
 214        CMD_ACT_RESET_WOL_RULE,
 215};
 216
 217/* Define action or option for CMD_MESH_ACCESS */
 218enum cmd_mesh_access_opts {
 219        CMD_ACT_MESH_GET_TTL = 1,
 220        CMD_ACT_MESH_SET_TTL,
 221        CMD_ACT_MESH_GET_STATS,
 222        CMD_ACT_MESH_GET_ANYCAST,
 223        CMD_ACT_MESH_SET_ANYCAST,
 224        CMD_ACT_MESH_SET_LINK_COSTS,
 225        CMD_ACT_MESH_GET_LINK_COSTS,
 226        CMD_ACT_MESH_SET_BCAST_RATE,
 227        CMD_ACT_MESH_GET_BCAST_RATE,
 228        CMD_ACT_MESH_SET_RREQ_DELAY,
 229        CMD_ACT_MESH_GET_RREQ_DELAY,
 230        CMD_ACT_MESH_SET_ROUTE_EXP,
 231        CMD_ACT_MESH_GET_ROUTE_EXP,
 232        CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
 233        CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
 234        CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
 235};
 236
 237/* Define actions and types for CMD_MESH_CONFIG */
 238enum cmd_mesh_config_actions {
 239        CMD_ACT_MESH_CONFIG_STOP = 0,
 240        CMD_ACT_MESH_CONFIG_START,
 241        CMD_ACT_MESH_CONFIG_SET,
 242        CMD_ACT_MESH_CONFIG_GET,
 243};
 244
 245enum cmd_mesh_config_types {
 246        CMD_TYPE_MESH_SET_BOOTFLAG = 1,
 247        CMD_TYPE_MESH_SET_BOOTTIME,
 248        CMD_TYPE_MESH_SET_DEF_CHANNEL,
 249        CMD_TYPE_MESH_SET_MESH_IE,
 250        CMD_TYPE_MESH_GET_DEFAULTS,
 251        CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
 252};
 253
 254/** Card Event definition */
 255#define MACREG_INT_CODE_TX_PPA_FREE             0
 256#define MACREG_INT_CODE_TX_DMA_DONE             1
 257#define MACREG_INT_CODE_LINK_LOST_W_SCAN        2
 258#define MACREG_INT_CODE_LINK_LOST_NO_SCAN       3
 259#define MACREG_INT_CODE_LINK_SENSED             4
 260#define MACREG_INT_CODE_CMD_FINISHED            5
 261#define MACREG_INT_CODE_MIB_CHANGED             6
 262#define MACREG_INT_CODE_INIT_DONE               7
 263#define MACREG_INT_CODE_DEAUTHENTICATED         8
 264#define MACREG_INT_CODE_DISASSOCIATED           9
 265#define MACREG_INT_CODE_PS_AWAKE                10
 266#define MACREG_INT_CODE_PS_SLEEP                11
 267#define MACREG_INT_CODE_MIC_ERR_MULTICAST       13
 268#define MACREG_INT_CODE_MIC_ERR_UNICAST         14
 269#define MACREG_INT_CODE_WM_AWAKE                15
 270#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE        16
 271#define MACREG_INT_CODE_ADHOC_BCN_LOST          17
 272#define MACREG_INT_CODE_HOST_AWAKE              18
 273#define MACREG_INT_CODE_STOP_TX                 19
 274#define MACREG_INT_CODE_START_TX                20
 275#define MACREG_INT_CODE_CHANNEL_SWITCH          21
 276#define MACREG_INT_CODE_MEASUREMENT_RDY         22
 277#define MACREG_INT_CODE_WMM_CHANGE              23
 278#define MACREG_INT_CODE_BG_SCAN_REPORT          24
 279#define MACREG_INT_CODE_RSSI_LOW                25
 280#define MACREG_INT_CODE_SNR_LOW                 26
 281#define MACREG_INT_CODE_MAX_FAIL                27
 282#define MACREG_INT_CODE_RSSI_HIGH               28
 283#define MACREG_INT_CODE_SNR_HIGH                29
 284#define MACREG_INT_CODE_MESH_AUTO_STARTED       35
 285#define MACREG_INT_CODE_FIRMWARE_READY          48
 286
 287
 288/* 802.11-related definitions */
 289
 290/* TxPD descriptor */
 291struct txpd {
 292        /* union to cope up with later FW revisions */
 293        union {
 294                /* Current Tx packet status */
 295                __le32 tx_status;
 296                struct {
 297                        /* BSS type: client, AP, etc. */
 298                        u8 bss_type;
 299                        /* BSS number */
 300                        u8 bss_num;
 301                        /* Reserved */
 302                        __le16 reserved;
 303                } bss;
 304        } u;
 305        /* Tx control */
 306        __le32 tx_control;
 307        __le32 tx_packet_location;
 308        /* Tx packet length */
 309        __le16 tx_packet_length;
 310        /* First 2 byte of destination MAC address */
 311        u8 tx_dest_addr_high[2];
 312        /* Last 4 byte of destination MAC address */
 313        u8 tx_dest_addr_low[4];
 314        /* Pkt Priority */
 315        u8 priority;
 316        /* Pkt Trasnit Power control */
 317        u8 powermgmt;
 318        /* Amount of time the packet has been queued (units = 2ms) */
 319        u8 pktdelay_2ms;
 320        /* reserved */
 321        u8 reserved1;
 322} __packed;
 323
 324/* RxPD Descriptor */
 325struct rxpd {
 326        /* union to cope up with later FW revisions */
 327        union {
 328                /* Current Rx packet status */
 329                __le16 status;
 330                struct {
 331                        /* BSS type: client, AP, etc. */
 332                        u8 bss_type;
 333                        /* BSS number */
 334                        u8 bss_num;
 335                } __packed bss;
 336        } __packed u;
 337
 338        /* SNR */
 339        u8 snr;
 340
 341        /* Tx control */
 342        u8 rx_control;
 343
 344        /* Pkt length */
 345        __le16 pkt_len;
 346
 347        /* Noise Floor */
 348        u8 nf;
 349
 350        /* Rx Packet Rate */
 351        u8 rx_rate;
 352
 353        /* Pkt addr */
 354        __le32 pkt_ptr;
 355
 356        /* Next Rx RxPD addr */
 357        __le32 next_rxpd_ptr;
 358
 359        /* Pkt Priority */
 360        u8 priority;
 361        u8 reserved[3];
 362} __packed;
 363
 364struct cmd_header {
 365        __le16 command;
 366        __le16 size;
 367        __le16 seqnum;
 368        __le16 result;
 369} __packed;
 370
 371/* Generic structure to hold all key types. */
 372struct enc_key {
 373        u16 len;
 374        u16 flags;  /* KEY_INFO_* from defs.h */
 375        u16 type; /* KEY_TYPE_* from defs.h */
 376        u8 key[32];
 377};
 378
 379/* lbs_offset_value */
 380struct lbs_offset_value {
 381        u32 offset;
 382        u32 value;
 383} __packed;
 384
 385#define MAX_11D_TRIPLETS        83
 386
 387struct mrvl_ie_domain_param_set {
 388        struct mrvl_ie_header header;
 389
 390        u8 country_code[3];
 391        struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
 392} __packed;
 393
 394struct cmd_ds_802_11d_domain_info {
 395        struct cmd_header hdr;
 396
 397        __le16 action;
 398        struct mrvl_ie_domain_param_set domain;
 399} __packed;
 400
 401/*
 402 * Define data structure for CMD_GET_HW_SPEC
 403 * This structure defines the response for the GET_HW_SPEC command
 404 */
 405struct cmd_ds_get_hw_spec {
 406        struct cmd_header hdr;
 407
 408        /* HW Interface version number */
 409        __le16 hwifversion;
 410        /* HW version number */
 411        __le16 version;
 412        /* Max number of TxPD FW can handle */
 413        __le16 nr_txpd;
 414        /* Max no of Multicast address */
 415        __le16 nr_mcast_adr;
 416        /* MAC address */
 417        u8 permanentaddr[6];
 418
 419        /* region Code */
 420        __le16 regioncode;
 421
 422        /* Number of antenna used */
 423        __le16 nr_antenna;
 424
 425        /* FW release number, example 0x01030304 = 2.3.4p1 */
 426        __le32 fwrelease;
 427
 428        /* Base Address of TxPD queue */
 429        __le32 wcb_base;
 430        /* Read Pointer of RxPd queue */
 431        __le32 rxpd_rdptr;
 432
 433        /* Write Pointer of RxPd queue */
 434        __le32 rxpd_wrptr;
 435
 436        /*FW/HW capability */
 437        __le32 fwcapinfo;
 438} __packed;
 439
 440struct cmd_ds_802_11_subscribe_event {
 441        struct cmd_header hdr;
 442
 443        __le16 action;
 444        __le16 events;
 445
 446        /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
 447         * number of TLVs. From the v5.1 manual, those TLVs would add up to
 448         * 40 bytes. However, future firmware might add additional TLVs, so I
 449         * bump this up a bit.
 450         */
 451        uint8_t tlv[128];
 452} __packed;
 453
 454/*
 455 * This scan handle Country Information IE(802.11d compliant)
 456 * Define data structure for CMD_802_11_SCAN
 457 */
 458struct cmd_ds_802_11_scan {
 459        struct cmd_header hdr;
 460
 461        uint8_t bsstype;
 462        uint8_t bssid[ETH_ALEN];
 463        uint8_t tlvbuffer[0];
 464} __packed;
 465
 466struct cmd_ds_802_11_scan_rsp {
 467        struct cmd_header hdr;
 468
 469        __le16 bssdescriptsize;
 470        uint8_t nr_sets;
 471        uint8_t bssdesc_and_tlvbuffer[0];
 472} __packed;
 473
 474struct cmd_ds_802_11_get_log {
 475        struct cmd_header hdr;
 476
 477        __le32 mcasttxframe;
 478        __le32 failed;
 479        __le32 retry;
 480        __le32 multiretry;
 481        __le32 framedup;
 482        __le32 rtssuccess;
 483        __le32 rtsfailure;
 484        __le32 ackfailure;
 485        __le32 rxfrag;
 486        __le32 mcastrxframe;
 487        __le32 fcserror;
 488        __le32 txframe;
 489        __le32 wepundecryptable;
 490} __packed;
 491
 492struct cmd_ds_mac_control {
 493        struct cmd_header hdr;
 494        __le16 action;
 495        u16 reserved;
 496} __packed;
 497
 498struct cmd_ds_mac_multicast_adr {
 499        struct cmd_header hdr;
 500        __le16 action;
 501        __le16 nr_of_adrs;
 502        u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
 503} __packed;
 504
 505struct cmd_ds_802_11_authenticate {
 506        struct cmd_header hdr;
 507
 508        u8 bssid[ETH_ALEN];
 509        u8 authtype;
 510        u8 reserved[10];
 511} __packed;
 512
 513struct cmd_ds_802_11_deauthenticate {
 514        struct cmd_header hdr;
 515
 516        u8 macaddr[ETH_ALEN];
 517        __le16 reasoncode;
 518} __packed;
 519
 520struct cmd_ds_802_11_associate {
 521        struct cmd_header hdr;
 522
 523        u8 bssid[6];
 524        __le16 capability;
 525        __le16 listeninterval;
 526        __le16 bcnperiod;
 527        u8 dtimperiod;
 528        u8 iebuf[512];    /* Enough for required and most optional IEs */
 529} __packed;
 530
 531struct cmd_ds_802_11_associate_response {
 532        struct cmd_header hdr;
 533
 534        __le16 capability;
 535        __le16 statuscode;
 536        __le16 aid;
 537        u8 iebuf[512];
 538} __packed;
 539
 540struct cmd_ds_802_11_set_wep {
 541        struct cmd_header hdr;
 542
 543        /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
 544        __le16 action;
 545
 546        /* key Index selected for Tx */
 547        __le16 keyindex;
 548
 549        /* 40, 128bit or TXWEP */
 550        uint8_t keytype[4];
 551        uint8_t keymaterial[4][16];
 552} __packed;
 553
 554struct cmd_ds_802_11_snmp_mib {
 555        struct cmd_header hdr;
 556
 557        __le16 action;
 558        __le16 oid;
 559        __le16 bufsize;
 560        u8 value[128];
 561} __packed;
 562
 563struct cmd_ds_reg_access {
 564        struct cmd_header hdr;
 565
 566        __le16 action;
 567        __le16 offset;
 568        union {
 569                u8 bbp_rf;  /* for BBP and RF registers */
 570                __le32 mac; /* for MAC registers */
 571        } value;
 572} __packed;
 573
 574struct cmd_ds_802_11_radio_control {
 575        struct cmd_header hdr;
 576
 577        __le16 action;
 578        __le16 control;
 579} __packed;
 580
 581struct cmd_ds_802_11_beacon_control {
 582        struct cmd_header hdr;
 583
 584        __le16 action;
 585        __le16 beacon_enable;
 586        __le16 beacon_period;
 587} __packed;
 588
 589struct cmd_ds_802_11_sleep_params {
 590        struct cmd_header hdr;
 591
 592        /* ACT_GET/ACT_SET */
 593        __le16 action;
 594
 595        /* Sleep clock error in ppm */
 596        __le16 error;
 597
 598        /* Wakeup offset in usec */
 599        __le16 offset;
 600
 601        /* Clock stabilization time in usec */
 602        __le16 stabletime;
 603
 604        /* control periodic calibration */
 605        uint8_t calcontrol;
 606
 607        /* control the use of external sleep clock */
 608        uint8_t externalsleepclk;
 609
 610        /* reserved field, should be set to zero */
 611        __le16 reserved;
 612} __packed;
 613
 614struct cmd_ds_802_11_rf_channel {
 615        struct cmd_header hdr;
 616
 617        __le16 action;
 618        __le16 channel;
 619        __le16 rftype;      /* unused */
 620        __le16 reserved;    /* unused */
 621        u8 channellist[32]; /* unused */
 622} __packed;
 623
 624struct cmd_ds_802_11_rssi {
 625        struct cmd_header hdr;
 626
 627        /* request:  number of beacons (N) to average the SNR and NF over
 628         * response: SNR of most recent beacon
 629         */
 630        __le16 n_or_snr;
 631
 632        /* The following fields are only set in the response.
 633         * In the request these are reserved and should be set to 0.
 634         */
 635        __le16 nf;       /* most recent beacon noise floor */
 636        __le16 avg_snr;  /* average SNR weighted by N from request */
 637        __le16 avg_nf;   /* average noise floor weighted by N from request */
 638} __packed;
 639
 640struct cmd_ds_802_11_mac_address {
 641        struct cmd_header hdr;
 642
 643        __le16 action;
 644        u8 macadd[ETH_ALEN];
 645} __packed;
 646
 647struct cmd_ds_802_11_rf_tx_power {
 648        struct cmd_header hdr;
 649
 650        __le16 action;
 651        __le16 curlevel;
 652        s8 maxlevel;
 653        s8 minlevel;
 654} __packed;
 655
 656/* MONITOR_MODE only exists in OLPC v5 firmware */
 657struct cmd_ds_802_11_monitor_mode {
 658        struct cmd_header hdr;
 659
 660        __le16 action;
 661        __le16 mode;
 662} __packed;
 663
 664struct cmd_ds_set_boot2_ver {
 665        struct cmd_header hdr;
 666
 667        __le16 action;
 668        __le16 version;
 669} __packed;
 670
 671struct cmd_ds_802_11_fw_wake_method {
 672        struct cmd_header hdr;
 673
 674        __le16 action;
 675        __le16 method;
 676} __packed;
 677
 678struct cmd_ds_802_11_ps_mode {
 679        struct cmd_header hdr;
 680
 681        __le16 action;
 682
 683        /* Interval for keepalive in PS mode:
 684         * 0x0000 = don't change
 685         * 0x001E = firmware default
 686         * 0xFFFF = disable
 687         */
 688        __le16 nullpktinterval;
 689
 690        /* Number of DTIM intervals to wake up for:
 691         * 0 = don't change
 692         * 1 = firmware default
 693         * 5 = max
 694         */
 695        __le16 multipledtim;
 696
 697        __le16 reserved;
 698        __le16 locallisteninterval;
 699
 700        /* AdHoc awake period (FW v9+ only):
 701         * 0 = don't change
 702         * 1 = always awake (IEEE standard behavior)
 703         * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
 704         * 32 - 254 = invalid
 705         * 255 = sleep at each ATIM
 706         */
 707        __le16 adhoc_awake_period;
 708} __packed;
 709
 710struct cmd_confirm_sleep {
 711        struct cmd_header hdr;
 712
 713        __le16 action;
 714        __le16 nullpktinterval;
 715        __le16 multipledtim;
 716        __le16 reserved;
 717        __le16 locallisteninterval;
 718} __packed;
 719
 720struct cmd_ds_802_11_data_rate {
 721        struct cmd_header hdr;
 722
 723        __le16 action;
 724        __le16 reserved;
 725        u8 rates[MAX_RATES];
 726} __packed;
 727
 728struct cmd_ds_802_11_rate_adapt_rateset {
 729        struct cmd_header hdr;
 730        __le16 action;
 731        __le16 enablehwauto;
 732        __le16 bitmap;
 733} __packed;
 734
 735struct cmd_ds_802_11_ad_hoc_start {
 736        struct cmd_header hdr;
 737
 738        u8 ssid[IEEE80211_MAX_SSID_LEN];
 739        u8 bsstype;
 740        __le16 beaconperiod;
 741        u8 dtimperiod;   /* Reserved on v9 and later */
 742        struct ieee_ie_ibss_param_set ibss;
 743        u8 reserved1[4];
 744        struct ieee_ie_ds_param_set ds;
 745        u8 reserved2[4];
 746        __le16 probedelay;  /* Reserved on v9 and later */
 747        __le16 capability;
 748        u8 rates[MAX_RATES];
 749        u8 tlv_memory_size_pad[100];
 750} __packed;
 751
 752struct cmd_ds_802_11_ad_hoc_result {
 753        struct cmd_header hdr;
 754
 755        u8 pad[3];
 756        u8 bssid[ETH_ALEN];
 757} __packed;
 758
 759struct adhoc_bssdesc {
 760        u8 bssid[ETH_ALEN];
 761        u8 ssid[IEEE80211_MAX_SSID_LEN];
 762        u8 type;
 763        __le16 beaconperiod;
 764        u8 dtimperiod;
 765        __le64 timestamp;
 766        __le64 localtime;
 767        struct ieee_ie_ds_param_set ds;
 768        u8 reserved1[4];
 769        struct ieee_ie_ibss_param_set ibss;
 770        u8 reserved2[4];
 771        __le16 capability;
 772        u8 rates[MAX_RATES];
 773
 774        /* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
 775         * Adhoc join command and will cause a binary layout mismatch with
 776         * the firmware
 777         */
 778} __packed;
 779
 780struct cmd_ds_802_11_ad_hoc_join {
 781        struct cmd_header hdr;
 782
 783        struct adhoc_bssdesc bss;
 784        __le16 failtimeout;   /* Reserved on v9 and later */
 785        __le16 probedelay;    /* Reserved on v9 and later */
 786} __packed;
 787
 788struct cmd_ds_802_11_ad_hoc_stop {
 789        struct cmd_header hdr;
 790} __packed;
 791
 792struct cmd_ds_802_11_enable_rsn {
 793        struct cmd_header hdr;
 794
 795        __le16 action;
 796        __le16 enable;
 797} __packed;
 798
 799struct MrvlIEtype_keyParamSet {
 800        /* type ID */
 801        __le16 type;
 802
 803        /* length of Payload */
 804        __le16 length;
 805
 806        /* type of key: WEP=0, TKIP=1, AES=2 */
 807        __le16 keytypeid;
 808
 809        /* key control Info specific to a keytypeid */
 810        __le16 keyinfo;
 811
 812        /* length of key */
 813        __le16 keylen;
 814
 815        /* key material of size keylen */
 816        u8 key[32];
 817} __packed;
 818
 819#define MAX_WOL_RULES           16
 820
 821struct host_wol_rule {
 822        uint8_t rule_no;
 823        uint8_t rule_ops;
 824        __le16 sig_offset;
 825        __le16 sig_length;
 826        __le16 reserve;
 827        __be32 sig_mask;
 828        __be32 signature;
 829} __packed;
 830
 831struct wol_config {
 832        uint8_t action;
 833        uint8_t pattern;
 834        uint8_t no_rules_in_cmd;
 835        uint8_t result;
 836        struct host_wol_rule rule[MAX_WOL_RULES];
 837} __packed;
 838
 839struct cmd_ds_host_sleep {
 840        struct cmd_header hdr;
 841        __le32 criteria;
 842        uint8_t gpio;
 843        uint16_t gap;
 844        struct wol_config wol_conf;
 845} __packed;
 846
 847
 848
 849struct cmd_ds_802_11_key_material {
 850        struct cmd_header hdr;
 851
 852        __le16 action;
 853        struct MrvlIEtype_keyParamSet keyParamSet[2];
 854} __packed;
 855
 856struct cmd_ds_802_11_eeprom_access {
 857        struct cmd_header hdr;
 858        __le16 action;
 859        __le16 offset;
 860        __le16 len;
 861        /* firmware says it returns a maximum of 20 bytes */
 862#define LBS_EEPROM_READ_LEN 20
 863        u8 value[LBS_EEPROM_READ_LEN];
 864} __packed;
 865
 866struct cmd_ds_802_11_tpc_cfg {
 867        struct cmd_header hdr;
 868
 869        __le16 action;
 870        uint8_t enable;
 871        int8_t P0;
 872        int8_t P1;
 873        int8_t P2;
 874        uint8_t usesnr;
 875} __packed;
 876
 877
 878struct cmd_ds_802_11_pa_cfg {
 879        struct cmd_header hdr;
 880
 881        __le16 action;
 882        uint8_t enable;
 883        int8_t P0;
 884        int8_t P1;
 885        int8_t P2;
 886} __packed;
 887
 888
 889struct cmd_ds_802_11_led_ctrl {
 890        struct cmd_header hdr;
 891
 892        __le16 action;
 893        __le16 numled;
 894        u8 data[256];
 895} __packed;
 896
 897/* Automatic Frequency Control */
 898struct cmd_ds_802_11_afc {
 899        struct cmd_header hdr;
 900
 901        __le16 afc_auto;
 902        union {
 903                struct {
 904                        __le16 threshold;
 905                        __le16 period;
 906                };
 907                struct {
 908                        __le16 timing_offset; /* signed */
 909                        __le16 carrier_offset; /* signed */
 910                };
 911        };
 912} __packed;
 913
 914struct cmd_tx_rate_query {
 915        __le16 txrate;
 916} __packed;
 917
 918struct cmd_ds_get_tsf {
 919        __le64 tsfvalue;
 920} __packed;
 921
 922struct cmd_ds_bt_access {
 923        struct cmd_header hdr;
 924
 925        __le16 action;
 926        __le32 id;
 927        u8 addr1[ETH_ALEN];
 928        u8 addr2[ETH_ALEN];
 929} __packed;
 930
 931struct cmd_ds_fwt_access {
 932        struct cmd_header hdr;
 933
 934        __le16 action;
 935        __le32 id;
 936        u8 valid;
 937        u8 da[ETH_ALEN];
 938        u8 dir;
 939        u8 ra[ETH_ALEN];
 940        __le32 ssn;
 941        __le32 dsn;
 942        __le32 metric;
 943        u8 rate;
 944        u8 hopcount;
 945        u8 ttl;
 946        __le32 expiration;
 947        u8 sleepmode;
 948        __le32 snr;
 949        __le32 references;
 950        u8 prec[ETH_ALEN];
 951} __packed;
 952
 953struct cmd_ds_mesh_config {
 954        struct cmd_header hdr;
 955
 956        __le16 action;
 957        __le16 channel;
 958        __le16 type;
 959        __le16 length;
 960        u8 data[128];   /* last position reserved */
 961} __packed;
 962
 963struct cmd_ds_mesh_access {
 964        struct cmd_header hdr;
 965
 966        __le16 action;
 967        __le32 data[32];        /* last position reserved */
 968} __packed;
 969
 970/* Number of stats counters returned by the firmware */
 971#define MESH_STATS_NUM 8
 972#endif
 973