linux/drivers/scsi/aic7xxx/aic79xx_osm.c
<<
>>
Prefs
   1/*
   2 * Adaptec AIC79xx device driver for Linux.
   3 *
   4 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
   5 *
   6 * --------------------------------------------------------------------------
   7 * Copyright (c) 1994-2000 Justin T. Gibbs.
   8 * Copyright (c) 1997-1999 Doug Ledford
   9 * Copyright (c) 2000-2003 Adaptec Inc.
  10 * All rights reserved.
  11 *
  12 * Redistribution and use in source and binary forms, with or without
  13 * modification, are permitted provided that the following conditions
  14 * are met:
  15 * 1. Redistributions of source code must retain the above copyright
  16 *    notice, this list of conditions, and the following disclaimer,
  17 *    without modification.
  18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19 *    substantially similar to the "NO WARRANTY" disclaimer below
  20 *    ("Disclaimer") and any redistribution must be conditioned upon
  21 *    including a substantially similar Disclaimer requirement for further
  22 *    binary redistribution.
  23 * 3. Neither the names of the above-listed copyright holders nor the names
  24 *    of any contributors may be used to endorse or promote products derived
  25 *    from this software without specific prior written permission.
  26 *
  27 * Alternatively, this software may be distributed under the terms of the
  28 * GNU General Public License ("GPL") version 2 as published by the Free
  29 * Software Foundation.
  30 *
  31 * NO WARRANTY
  32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42 * POSSIBILITY OF SUCH DAMAGES.
  43 */
  44
  45#include "aic79xx_osm.h"
  46#include "aic79xx_inline.h"
  47#include <scsi/scsicam.h>
  48
  49static struct scsi_transport_template *ahd_linux_transport_template = NULL;
  50
  51#include <linux/init.h>         /* __setup */
  52#include <linux/mm.h>           /* For fetching system memory size */
  53#include <linux/blkdev.h>               /* For block_size() */
  54#include <linux/delay.h>        /* For ssleep/msleep */
  55#include <linux/device.h>
  56#include <linux/slab.h>
  57
  58/*
  59 * Bucket size for counting good commands in between bad ones.
  60 */
  61#define AHD_LINUX_ERR_THRESH    1000
  62
  63/*
  64 * Set this to the delay in seconds after SCSI bus reset.
  65 * Note, we honor this only for the initial bus reset.
  66 * The scsi error recovery code performs its own bus settle
  67 * delay handling for error recovery actions.
  68 */
  69#ifdef CONFIG_AIC79XX_RESET_DELAY_MS
  70#define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
  71#else
  72#define AIC79XX_RESET_DELAY 5000
  73#endif
  74
  75/*
  76 * To change the default number of tagged transactions allowed per-device,
  77 * add a line to the lilo.conf file like:
  78 * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
  79 * which will result in the first four devices on the first two
  80 * controllers being set to a tagged queue depth of 32.
  81 *
  82 * The tag_commands is an array of 16 to allow for wide and twin adapters.
  83 * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
  84 * for channel 1.
  85 */
  86typedef struct {
  87        uint16_t tag_commands[16];      /* Allow for wide/twin adapters. */
  88} adapter_tag_info_t;
  89
  90/*
  91 * Modify this as you see fit for your system.
  92 *
  93 * 0                    tagged queuing disabled
  94 * 1 <= n <= 253        n == max tags ever dispatched.
  95 *
  96 * The driver will throttle the number of commands dispatched to a
  97 * device if it returns queue full.  For devices with a fixed maximum
  98 * queue depth, the driver will eventually determine this depth and
  99 * lock it in (a console message is printed to indicate that a lock
 100 * has occurred).  On some devices, queue full is returned for a temporary
 101 * resource shortage.  These devices will return queue full at varying
 102 * depths.  The driver will throttle back when the queue fulls occur and
 103 * attempt to slowly increase the depth over time as the device recovers
 104 * from the resource shortage.
 105 *
 106 * In this example, the first line will disable tagged queueing for all
 107 * the devices on the first probed aic79xx adapter.
 108 *
 109 * The second line enables tagged queueing with 4 commands/LUN for IDs
 110 * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
 111 * driver to attempt to use up to 64 tags for ID 1.
 112 *
 113 * The third line is the same as the first line.
 114 *
 115 * The fourth line disables tagged queueing for devices 0 and 3.  It
 116 * enables tagged queueing for the other IDs, with 16 commands/LUN
 117 * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
 118 * IDs 2, 5-7, and 9-15.
 119 */
 120
 121/*
 122 * NOTE: The below structure is for reference only, the actual structure
 123 *       to modify in order to change things is just below this comment block.
 124adapter_tag_info_t aic79xx_tag_info[] =
 125{
 126        {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
 127        {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
 128        {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
 129        {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
 130};
 131*/
 132
 133#ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
 134#define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
 135#else
 136#define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
 137#endif
 138
 139#define AIC79XX_CONFIGED_TAG_COMMANDS {                                 \
 140        AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 141        AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 142        AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 143        AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 144        AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 145        AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 146        AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,               \
 147        AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE                \
 148}
 149
 150/*
 151 * By default, use the number of commands specified by
 152 * the users kernel configuration.
 153 */
 154static adapter_tag_info_t aic79xx_tag_info[] =
 155{
 156        {AIC79XX_CONFIGED_TAG_COMMANDS},
 157        {AIC79XX_CONFIGED_TAG_COMMANDS},
 158        {AIC79XX_CONFIGED_TAG_COMMANDS},
 159        {AIC79XX_CONFIGED_TAG_COMMANDS},
 160        {AIC79XX_CONFIGED_TAG_COMMANDS},
 161        {AIC79XX_CONFIGED_TAG_COMMANDS},
 162        {AIC79XX_CONFIGED_TAG_COMMANDS},
 163        {AIC79XX_CONFIGED_TAG_COMMANDS},
 164        {AIC79XX_CONFIGED_TAG_COMMANDS},
 165        {AIC79XX_CONFIGED_TAG_COMMANDS},
 166        {AIC79XX_CONFIGED_TAG_COMMANDS},
 167        {AIC79XX_CONFIGED_TAG_COMMANDS},
 168        {AIC79XX_CONFIGED_TAG_COMMANDS},
 169        {AIC79XX_CONFIGED_TAG_COMMANDS},
 170        {AIC79XX_CONFIGED_TAG_COMMANDS},
 171        {AIC79XX_CONFIGED_TAG_COMMANDS}
 172};
 173
 174/*
 175 * The I/O cell on the chip is very configurable in respect to its analog
 176 * characteristics.  Set the defaults here; they can be overriden with
 177 * the proper insmod parameters.
 178 */
 179struct ahd_linux_iocell_opts
 180{
 181        uint8_t precomp;
 182        uint8_t slewrate;
 183        uint8_t amplitude;
 184};
 185#define AIC79XX_DEFAULT_PRECOMP         0xFF
 186#define AIC79XX_DEFAULT_SLEWRATE        0xFF
 187#define AIC79XX_DEFAULT_AMPLITUDE       0xFF
 188#define AIC79XX_DEFAULT_IOOPTS                  \
 189{                                               \
 190        AIC79XX_DEFAULT_PRECOMP,                \
 191        AIC79XX_DEFAULT_SLEWRATE,               \
 192        AIC79XX_DEFAULT_AMPLITUDE               \
 193}
 194#define AIC79XX_PRECOMP_INDEX   0
 195#define AIC79XX_SLEWRATE_INDEX  1
 196#define AIC79XX_AMPLITUDE_INDEX 2
 197static const struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
 198{
 199        AIC79XX_DEFAULT_IOOPTS,
 200        AIC79XX_DEFAULT_IOOPTS,
 201        AIC79XX_DEFAULT_IOOPTS,
 202        AIC79XX_DEFAULT_IOOPTS,
 203        AIC79XX_DEFAULT_IOOPTS,
 204        AIC79XX_DEFAULT_IOOPTS,
 205        AIC79XX_DEFAULT_IOOPTS,
 206        AIC79XX_DEFAULT_IOOPTS,
 207        AIC79XX_DEFAULT_IOOPTS,
 208        AIC79XX_DEFAULT_IOOPTS,
 209        AIC79XX_DEFAULT_IOOPTS,
 210        AIC79XX_DEFAULT_IOOPTS,
 211        AIC79XX_DEFAULT_IOOPTS,
 212        AIC79XX_DEFAULT_IOOPTS,
 213        AIC79XX_DEFAULT_IOOPTS,
 214        AIC79XX_DEFAULT_IOOPTS
 215};
 216
 217/*
 218 * There should be a specific return value for this in scsi.h, but
 219 * it seems that most drivers ignore it.
 220 */
 221#define DID_UNDERFLOW   DID_ERROR
 222
 223void
 224ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
 225{
 226        printk("(scsi%d:%c:%d:%d): ",
 227               ahd->platform_data->host->host_no,
 228               scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
 229               scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
 230               scb != NULL ? SCB_GET_LUN(scb) : -1);
 231}
 232
 233/*
 234 * XXX - these options apply unilaterally to _all_ adapters
 235 *       cards in the system.  This should be fixed.  Exceptions to this
 236 *       rule are noted in the comments.
 237 */
 238
 239/*
 240 * Skip the scsi bus reset.  Non 0 make us skip the reset at startup.  This
 241 * has no effect on any later resets that might occur due to things like
 242 * SCSI bus timeouts.
 243 */
 244static uint32_t aic79xx_no_reset;
 245
 246/*
 247 * Should we force EXTENDED translation on a controller.
 248 *     0 == Use whatever is in the SEEPROM or default to off
 249 *     1 == Use whatever is in the SEEPROM or default to on
 250 */
 251static uint32_t aic79xx_extended;
 252
 253/*
 254 * PCI bus parity checking of the Adaptec controllers.  This is somewhat
 255 * dubious at best.  To my knowledge, this option has never actually
 256 * solved a PCI parity problem, but on certain machines with broken PCI
 257 * chipset configurations, it can generate tons of false error messages.
 258 * It's included in the driver for completeness.
 259 *   0     = Shut off PCI parity check
 260 *   non-0 = Enable PCI parity check
 261 *
 262 * NOTE: you can't actually pass -1 on the lilo prompt.  So, to set this
 263 * variable to -1 you would actually want to simply pass the variable
 264 * name without a number.  That will invert the 0 which will result in
 265 * -1.
 266 */
 267static uint32_t aic79xx_pci_parity = ~0;
 268
 269/*
 270 * There are lots of broken chipsets in the world.  Some of them will
 271 * violate the PCI spec when we issue byte sized memory writes to our
 272 * controller.  I/O mapped register access, if allowed by the given
 273 * platform, will work in almost all cases.
 274 */
 275uint32_t aic79xx_allow_memio = ~0;
 276
 277/*
 278 * So that we can set how long each device is given as a selection timeout.
 279 * The table of values goes like this:
 280 *   0 - 256ms
 281 *   1 - 128ms
 282 *   2 - 64ms
 283 *   3 - 32ms
 284 * We default to 256ms because some older devices need a longer time
 285 * to respond to initial selection.
 286 */
 287static uint32_t aic79xx_seltime;
 288
 289/*
 290 * Certain devices do not perform any aging on commands.  Should the
 291 * device be saturated by commands in one portion of the disk, it is
 292 * possible for transactions on far away sectors to never be serviced.
 293 * To handle these devices, we can periodically send an ordered tag to
 294 * force all outstanding transactions to be serviced prior to a new
 295 * transaction.
 296 */
 297static uint32_t aic79xx_periodic_otag;
 298
 299/* Some storage boxes are using an LSI chip which has a bug making it
 300 * impossible to use aic79xx Rev B chip in 320 speeds.  The following
 301 * storage boxes have been reported to be buggy:
 302 * EonStor 3U 16-Bay: U16U-G3A3
 303 * EonStor 2U 12-Bay: U12U-G3A3
 304 * SentinelRAID: 2500F R5 / R6
 305 * SentinelRAID: 2500F R1
 306 * SentinelRAID: 2500F/1500F
 307 * SentinelRAID: 150F
 308 * 
 309 * To get around this LSI bug, you can set your board to 160 mode
 310 * or you can enable the SLOWCRC bit.
 311 */
 312uint32_t aic79xx_slowcrc;
 313
 314/*
 315 * Module information and settable options.
 316 */
 317static char *aic79xx = NULL;
 318
 319MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>");
 320MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver");
 321MODULE_LICENSE("Dual BSD/GPL");
 322MODULE_VERSION(AIC79XX_DRIVER_VERSION);
 323module_param(aic79xx, charp, 0444);
 324MODULE_PARM_DESC(aic79xx,
 325"period-delimited options string:\n"
 326"       verbose                 Enable verbose/diagnostic logging\n"
 327"       allow_memio             Allow device registers to be memory mapped\n"
 328"       debug                   Bitmask of debug values to enable\n"
 329"       no_reset                Suppress initial bus resets\n"
 330"       extended                Enable extended geometry on all controllers\n"
 331"       periodic_otag           Send an ordered tagged transaction\n"
 332"                               periodically to prevent tag starvation.\n"
 333"                               This may be required by some older disk\n"
 334"                               or drives/RAID arrays.\n"
 335"       tag_info:<tag_str>      Set per-target tag depth\n"
 336"       global_tag_depth:<int>  Global tag depth for all targets on all buses\n"
 337"       slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
 338"       precomp:<pcomp_list>    Set the signal precompensation (0-7).\n"
 339"       amplitude:<int>         Set the signal amplitude (0-7).\n"
 340"       seltime:<int>           Selection Timeout:\n"
 341"                               (0/256ms,1/128ms,2/64ms,3/32ms)\n"
 342"       slowcrc                 Turn on the SLOWCRC bit (Rev B only)\n"          
 343"\n"
 344"       Sample /etc/modprobe.conf line:\n"
 345"               Enable verbose logging\n"
 346"               Set tag depth on Controller 2/Target 2 to 10 tags\n"
 347"               Shorten the selection timeout to 128ms\n"
 348"\n"
 349"       options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
 350);
 351
 352static void ahd_linux_handle_scsi_status(struct ahd_softc *,
 353                                         struct scsi_device *,
 354                                         struct scb *);
 355static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
 356                                         struct scsi_cmnd *cmd);
 357static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd);
 358static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
 359static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
 360                                     struct ahd_devinfo *devinfo);
 361static void ahd_linux_device_queue_depth(struct scsi_device *);
 362static int ahd_linux_run_command(struct ahd_softc*,
 363                                 struct ahd_linux_device *,
 364                                 struct scsi_cmnd *);
 365static void ahd_linux_setup_tag_info_global(char *p);
 366static int  aic79xx_setup(char *c);
 367static void ahd_freeze_simq(struct ahd_softc *ahd);
 368static void ahd_release_simq(struct ahd_softc *ahd);
 369
 370static int ahd_linux_unit;
 371
 372
 373/************************** OS Utility Wrappers *******************************/
 374void ahd_delay(long);
 375void
 376ahd_delay(long usec)
 377{
 378        /*
 379         * udelay on Linux can have problems for
 380         * multi-millisecond waits.  Wait at most
 381         * 1024us per call.
 382         */
 383        while (usec > 0) {
 384                udelay(usec % 1024);
 385                usec -= 1024;
 386        }
 387}
 388
 389
 390/***************************** Low Level I/O **********************************/
 391uint8_t ahd_inb(struct ahd_softc * ahd, long port);
 392void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val);
 393void ahd_outw_atomic(struct ahd_softc * ahd,
 394                                     long port, uint16_t val);
 395void ahd_outsb(struct ahd_softc * ahd, long port,
 396                               uint8_t *, int count);
 397void ahd_insb(struct ahd_softc * ahd, long port,
 398                               uint8_t *, int count);
 399
 400uint8_t
 401ahd_inb(struct ahd_softc * ahd, long port)
 402{
 403        uint8_t x;
 404
 405        if (ahd->tags[0] == BUS_SPACE_MEMIO) {
 406                x = readb(ahd->bshs[0].maddr + port);
 407        } else {
 408                x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
 409        }
 410        mb();
 411        return (x);
 412}
 413
 414#if 0 /* unused */
 415static uint16_t
 416ahd_inw_atomic(struct ahd_softc * ahd, long port)
 417{
 418        uint8_t x;
 419
 420        if (ahd->tags[0] == BUS_SPACE_MEMIO) {
 421                x = readw(ahd->bshs[0].maddr + port);
 422        } else {
 423                x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
 424        }
 425        mb();
 426        return (x);
 427}
 428#endif
 429
 430void
 431ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
 432{
 433        if (ahd->tags[0] == BUS_SPACE_MEMIO) {
 434                writeb(val, ahd->bshs[0].maddr + port);
 435        } else {
 436                outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
 437        }
 438        mb();
 439}
 440
 441void
 442ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
 443{
 444        if (ahd->tags[0] == BUS_SPACE_MEMIO) {
 445                writew(val, ahd->bshs[0].maddr + port);
 446        } else {
 447                outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
 448        }
 449        mb();
 450}
 451
 452void
 453ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
 454{
 455        int i;
 456
 457        /*
 458         * There is probably a more efficient way to do this on Linux
 459         * but we don't use this for anything speed critical and this
 460         * should work.
 461         */
 462        for (i = 0; i < count; i++)
 463                ahd_outb(ahd, port, *array++);
 464}
 465
 466void
 467ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
 468{
 469        int i;
 470
 471        /*
 472         * There is probably a more efficient way to do this on Linux
 473         * but we don't use this for anything speed critical and this
 474         * should work.
 475         */
 476        for (i = 0; i < count; i++)
 477                *array++ = ahd_inb(ahd, port);
 478}
 479
 480/******************************* PCI Routines *********************************/
 481uint32_t
 482ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width)
 483{
 484        switch (width) {
 485        case 1:
 486        {
 487                uint8_t retval;
 488
 489                pci_read_config_byte(pci, reg, &retval);
 490                return (retval);
 491        }
 492        case 2:
 493        {
 494                uint16_t retval;
 495                pci_read_config_word(pci, reg, &retval);
 496                return (retval);
 497        }
 498        case 4:
 499        {
 500                uint32_t retval;
 501                pci_read_config_dword(pci, reg, &retval);
 502                return (retval);
 503        }
 504        default:
 505                panic("ahd_pci_read_config: Read size too big");
 506                /* NOTREACHED */
 507                return (0);
 508        }
 509}
 510
 511void
 512ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width)
 513{
 514        switch (width) {
 515        case 1:
 516                pci_write_config_byte(pci, reg, value);
 517                break;
 518        case 2:
 519                pci_write_config_word(pci, reg, value);
 520                break;
 521        case 4:
 522                pci_write_config_dword(pci, reg, value);
 523                break;
 524        default:
 525                panic("ahd_pci_write_config: Write size too big");
 526                /* NOTREACHED */
 527        }
 528}
 529
 530/****************************** Inlines ***************************************/
 531static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
 532
 533static void
 534ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
 535{
 536        struct scsi_cmnd *cmd;
 537
 538        cmd = scb->io_ctx;
 539        ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
 540        scsi_dma_unmap(cmd);
 541}
 542
 543/******************************** Macros **************************************/
 544#define BUILD_SCSIID(ahd, cmd)                                          \
 545        (((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id)
 546
 547/*
 548 * Return a string describing the driver.
 549 */
 550static const char *
 551ahd_linux_info(struct Scsi_Host *host)
 552{
 553        static char buffer[512];
 554        char    ahd_info[256];
 555        char   *bp;
 556        struct ahd_softc *ahd;
 557
 558        bp = &buffer[0];
 559        ahd = *(struct ahd_softc **)host->hostdata;
 560        memset(bp, 0, sizeof(buffer));
 561        strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION "\n"
 562                        "        <");
 563        strcat(bp, ahd->description);
 564        strcat(bp, ">\n"
 565                        "        ");
 566        ahd_controller_info(ahd, ahd_info);
 567        strcat(bp, ahd_info);
 568
 569        return (bp);
 570}
 571
 572/*
 573 * Queue an SCB to the controller.
 574 */
 575static int
 576ahd_linux_queue_lck(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 577{
 578        struct   ahd_softc *ahd;
 579        struct   ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
 580        int rtn = SCSI_MLQUEUE_HOST_BUSY;
 581
 582        ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
 583
 584        cmd->scsi_done = scsi_done;
 585        cmd->result = CAM_REQ_INPROG << 16;
 586        rtn = ahd_linux_run_command(ahd, dev, cmd);
 587
 588        return rtn;
 589}
 590
 591static DEF_SCSI_QCMD(ahd_linux_queue)
 592
 593static struct scsi_target **
 594ahd_linux_target_in_softc(struct scsi_target *starget)
 595{
 596        struct  ahd_softc *ahd =
 597                *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
 598        unsigned int target_offset;
 599
 600        target_offset = starget->id;
 601        if (starget->channel != 0)
 602                target_offset += 8;
 603
 604        return &ahd->platform_data->starget[target_offset];
 605}
 606
 607static int
 608ahd_linux_target_alloc(struct scsi_target *starget)
 609{
 610        struct  ahd_softc *ahd =
 611                *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
 612        struct seeprom_config *sc = ahd->seep_config;
 613        unsigned long flags;
 614        struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
 615        struct ahd_devinfo devinfo;
 616        struct ahd_initiator_tinfo *tinfo;
 617        struct ahd_tmode_tstate *tstate;
 618        char channel = starget->channel + 'A';
 619
 620        ahd_lock(ahd, &flags);
 621
 622        BUG_ON(*ahd_targp != NULL);
 623
 624        *ahd_targp = starget;
 625
 626        if (sc) {
 627                int flags = sc->device_flags[starget->id];
 628
 629                tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
 630                                            starget->id, &tstate);
 631
 632                if ((flags  & CFPACKETIZED) == 0) {
 633                        /* don't negotiate packetized (IU) transfers */
 634                        spi_max_iu(starget) = 0;
 635                } else {
 636                        if ((ahd->features & AHD_RTI) == 0)
 637                                spi_rti(starget) = 0;
 638                }
 639
 640                if ((flags & CFQAS) == 0)
 641                        spi_max_qas(starget) = 0;
 642
 643                /* Transinfo values have been set to BIOS settings */
 644                spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
 645                spi_min_period(starget) = tinfo->user.period;
 646                spi_max_offset(starget) = tinfo->user.offset;
 647        }
 648
 649        tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
 650                                    starget->id, &tstate);
 651        ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
 652                            CAM_LUN_WILDCARD, channel,
 653                            ROLE_INITIATOR);
 654        ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
 655                         AHD_TRANS_GOAL, /*paused*/FALSE);
 656        ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
 657                      AHD_TRANS_GOAL, /*paused*/FALSE);
 658        ahd_unlock(ahd, &flags);
 659
 660        return 0;
 661}
 662
 663static void
 664ahd_linux_target_destroy(struct scsi_target *starget)
 665{
 666        struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
 667
 668        *ahd_targp = NULL;
 669}
 670
 671static int
 672ahd_linux_slave_alloc(struct scsi_device *sdev)
 673{
 674        struct  ahd_softc *ahd =
 675                *((struct ahd_softc **)sdev->host->hostdata);
 676        struct ahd_linux_device *dev;
 677
 678        if (bootverbose)
 679                printk("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
 680
 681        dev = scsi_transport_device_data(sdev);
 682        memset(dev, 0, sizeof(*dev));
 683
 684        /*
 685         * We start out life using untagged
 686         * transactions of which we allow one.
 687         */
 688        dev->openings = 1;
 689
 690        /*
 691         * Set maxtags to 0.  This will be changed if we
 692         * later determine that we are dealing with
 693         * a tagged queuing capable device.
 694         */
 695        dev->maxtags = 0;
 696        
 697        return (0);
 698}
 699
 700static int
 701ahd_linux_slave_configure(struct scsi_device *sdev)
 702{
 703        struct  ahd_softc *ahd;
 704
 705        ahd = *((struct ahd_softc **)sdev->host->hostdata);
 706        if (bootverbose)
 707                sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
 708
 709        ahd_linux_device_queue_depth(sdev);
 710
 711        /* Initial Domain Validation */
 712        if (!spi_initial_dv(sdev->sdev_target))
 713                spi_dv_device(sdev);
 714
 715        return 0;
 716}
 717
 718#if defined(__i386__)
 719/*
 720 * Return the disk geometry for the given SCSI device.
 721 */
 722static int
 723ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
 724                    sector_t capacity, int geom[])
 725{
 726        uint8_t *bh;
 727        int      heads;
 728        int      sectors;
 729        int      cylinders;
 730        int      ret;
 731        int      extended;
 732        struct   ahd_softc *ahd;
 733
 734        ahd = *((struct ahd_softc **)sdev->host->hostdata);
 735
 736        bh = scsi_bios_ptable(bdev);
 737        if (bh) {
 738                ret = scsi_partsize(bh, capacity,
 739                                    &geom[2], &geom[0], &geom[1]);
 740                kfree(bh);
 741                if (ret != -1)
 742                        return (ret);
 743        }
 744        heads = 64;
 745        sectors = 32;
 746        cylinders = aic_sector_div(capacity, heads, sectors);
 747
 748        if (aic79xx_extended != 0)
 749                extended = 1;
 750        else
 751                extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
 752        if (extended && cylinders >= 1024) {
 753                heads = 255;
 754                sectors = 63;
 755                cylinders = aic_sector_div(capacity, heads, sectors);
 756        }
 757        geom[0] = heads;
 758        geom[1] = sectors;
 759        geom[2] = cylinders;
 760        return (0);
 761}
 762#endif
 763
 764/*
 765 * Abort the current SCSI command(s).
 766 */
 767static int
 768ahd_linux_abort(struct scsi_cmnd *cmd)
 769{
 770        int error;
 771        
 772        error = ahd_linux_queue_abort_cmd(cmd);
 773
 774        return error;
 775}
 776
 777/*
 778 * Attempt to send a target reset message to the device that timed out.
 779 */
 780static int
 781ahd_linux_dev_reset(struct scsi_cmnd *cmd)
 782{
 783        struct ahd_softc *ahd;
 784        struct ahd_linux_device *dev;
 785        struct scb *reset_scb;
 786        u_int  cdb_byte;
 787        int    retval = SUCCESS;
 788        int    paused;
 789        int    wait;
 790        struct  ahd_initiator_tinfo *tinfo;
 791        struct  ahd_tmode_tstate *tstate;
 792        unsigned long flags;
 793        DECLARE_COMPLETION_ONSTACK(done);
 794
 795        reset_scb = NULL;
 796        paused = FALSE;
 797        wait = FALSE;
 798        ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
 799
 800        scmd_printk(KERN_INFO, cmd,
 801                    "Attempting to queue a TARGET RESET message:");
 802
 803        printk("CDB:");
 804        for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
 805                printk(" 0x%x", cmd->cmnd[cdb_byte]);
 806        printk("\n");
 807
 808        /*
 809         * Determine if we currently own this command.
 810         */
 811        dev = scsi_transport_device_data(cmd->device);
 812
 813        if (dev == NULL) {
 814                /*
 815                 * No target device for this command exists,
 816                 * so we must not still own the command.
 817                 */
 818                scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
 819                return SUCCESS;
 820        }
 821
 822        /*
 823         * Generate us a new SCB
 824         */
 825        reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX);
 826        if (!reset_scb) {
 827                scmd_printk(KERN_INFO, cmd, "No SCB available\n");
 828                return FAILED;
 829        }
 830
 831        tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
 832                                    cmd->device->id, &tstate);
 833        reset_scb->io_ctx = cmd;
 834        reset_scb->platform_data->dev = dev;
 835        reset_scb->sg_count = 0;
 836        ahd_set_residual(reset_scb, 0);
 837        ahd_set_sense_residual(reset_scb, 0);
 838        reset_scb->platform_data->xfer_len = 0;
 839        reset_scb->hscb->control = 0;
 840        reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd);
 841        reset_scb->hscb->lun = cmd->device->lun;
 842        reset_scb->hscb->cdb_len = 0;
 843        reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET;
 844        reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE;
 845        if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
 846                reset_scb->flags |= SCB_PACKETIZED;
 847        } else {
 848                reset_scb->hscb->control |= MK_MESSAGE;
 849        }
 850        dev->openings--;
 851        dev->active++;
 852        dev->commands_issued++;
 853
 854        ahd_lock(ahd, &flags);
 855
 856        LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links);
 857        ahd_queue_scb(ahd, reset_scb);
 858
 859        ahd->platform_data->eh_done = &done;
 860        ahd_unlock(ahd, &flags);
 861
 862        printk("%s: Device reset code sleeping\n", ahd_name(ahd));
 863        if (!wait_for_completion_timeout(&done, 5 * HZ)) {
 864                ahd_lock(ahd, &flags);
 865                ahd->platform_data->eh_done = NULL;
 866                ahd_unlock(ahd, &flags);
 867                printk("%s: Device reset timer expired (active %d)\n",
 868                       ahd_name(ahd), dev->active);
 869                retval = FAILED;
 870        }
 871        printk("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
 872
 873        return (retval);
 874}
 875
 876/*
 877 * Reset the SCSI bus.
 878 */
 879static int
 880ahd_linux_bus_reset(struct scsi_cmnd *cmd)
 881{
 882        struct ahd_softc *ahd;
 883        int    found;
 884        unsigned long flags;
 885
 886        ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
 887#ifdef AHD_DEBUG
 888        if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
 889                printk("%s: Bus reset called for cmd %p\n",
 890                       ahd_name(ahd), cmd);
 891#endif
 892        ahd_lock(ahd, &flags);
 893
 894        found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A',
 895                                  /*initiate reset*/TRUE);
 896        ahd_unlock(ahd, &flags);
 897
 898        if (bootverbose)
 899                printk("%s: SCSI bus reset delivered. "
 900                       "%d SCBs aborted.\n", ahd_name(ahd), found);
 901
 902        return (SUCCESS);
 903}
 904
 905struct scsi_host_template aic79xx_driver_template = {
 906        .module                 = THIS_MODULE,
 907        .name                   = "aic79xx",
 908        .proc_name              = "aic79xx",
 909        .proc_info              = ahd_linux_proc_info,
 910        .info                   = ahd_linux_info,
 911        .queuecommand           = ahd_linux_queue,
 912        .eh_abort_handler       = ahd_linux_abort,
 913        .eh_device_reset_handler = ahd_linux_dev_reset,
 914        .eh_bus_reset_handler   = ahd_linux_bus_reset,
 915#if defined(__i386__)
 916        .bios_param             = ahd_linux_biosparam,
 917#endif
 918        .can_queue              = AHD_MAX_QUEUE,
 919        .this_id                = -1,
 920        .max_sectors            = 8192,
 921        .cmd_per_lun            = 2,
 922        .use_clustering         = ENABLE_CLUSTERING,
 923        .slave_alloc            = ahd_linux_slave_alloc,
 924        .slave_configure        = ahd_linux_slave_configure,
 925        .target_alloc           = ahd_linux_target_alloc,
 926        .target_destroy         = ahd_linux_target_destroy,
 927};
 928
 929/******************************** Bus DMA *************************************/
 930int
 931ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
 932                   bus_size_t alignment, bus_size_t boundary,
 933                   dma_addr_t lowaddr, dma_addr_t highaddr,
 934                   bus_dma_filter_t *filter, void *filterarg,
 935                   bus_size_t maxsize, int nsegments,
 936                   bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
 937{
 938        bus_dma_tag_t dmat;
 939
 940        dmat = kmalloc(sizeof(*dmat), GFP_ATOMIC);
 941        if (dmat == NULL)
 942                return (ENOMEM);
 943
 944        /*
 945         * Linux is very simplistic about DMA memory.  For now don't
 946         * maintain all specification information.  Once Linux supplies
 947         * better facilities for doing these operations, or the
 948         * needs of this particular driver change, we might need to do
 949         * more here.
 950         */
 951        dmat->alignment = alignment;
 952        dmat->boundary = boundary;
 953        dmat->maxsize = maxsize;
 954        *ret_tag = dmat;
 955        return (0);
 956}
 957
 958void
 959ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
 960{
 961        kfree(dmat);
 962}
 963
 964int
 965ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
 966                 int flags, bus_dmamap_t *mapp)
 967{
 968        *vaddr = pci_alloc_consistent(ahd->dev_softc,
 969                                      dmat->maxsize, mapp);
 970        if (*vaddr == NULL)
 971                return (ENOMEM);
 972        return(0);
 973}
 974
 975void
 976ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
 977                void* vaddr, bus_dmamap_t map)
 978{
 979        pci_free_consistent(ahd->dev_softc, dmat->maxsize,
 980                            vaddr, map);
 981}
 982
 983int
 984ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
 985                void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
 986                void *cb_arg, int flags)
 987{
 988        /*
 989         * Assume for now that this will only be used during
 990         * initialization and not for per-transaction buffer mapping.
 991         */
 992        bus_dma_segment_t stack_sg;
 993
 994        stack_sg.ds_addr = map;
 995        stack_sg.ds_len = dmat->maxsize;
 996        cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
 997        return (0);
 998}
 999
1000void
1001ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
1002{
1003}
1004
1005int
1006ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
1007{
1008        /* Nothing to do */
1009        return (0);
1010}
1011
1012/********************* Platform Dependent Functions ***************************/
1013static void
1014ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
1015{
1016
1017        if ((instance >= 0)
1018         && (instance < ARRAY_SIZE(aic79xx_iocell_info))) {
1019                uint8_t *iocell_info;
1020
1021                iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
1022                iocell_info[index] = value & 0xFFFF;
1023                if (bootverbose)
1024                        printk("iocell[%d:%ld] = %d\n", instance, index, value);
1025        }
1026}
1027
1028static void
1029ahd_linux_setup_tag_info_global(char *p)
1030{
1031        int tags, i, j;
1032
1033        tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
1034        printk("Setting Global Tags= %d\n", tags);
1035
1036        for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) {
1037                for (j = 0; j < AHD_NUM_TARGETS; j++) {
1038                        aic79xx_tag_info[i].tag_commands[j] = tags;
1039                }
1040        }
1041}
1042
1043static void
1044ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
1045{
1046
1047        if ((instance >= 0) && (targ >= 0)
1048         && (instance < ARRAY_SIZE(aic79xx_tag_info))
1049         && (targ < AHD_NUM_TARGETS)) {
1050                aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
1051                if (bootverbose)
1052                        printk("tag_info[%d:%d] = %d\n", instance, targ, value);
1053        }
1054}
1055
1056static char *
1057ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
1058                       void (*callback)(u_long, int, int, int32_t),
1059                       u_long callback_arg)
1060{
1061        char    *tok_end;
1062        char    *tok_end2;
1063        int      i;
1064        int      instance;
1065        int      targ;
1066        int      done;
1067        char     tok_list[] = {'.', ',', '{', '}', '\0'};
1068
1069        /* All options use a ':' name/arg separator */
1070        if (*opt_arg != ':')
1071                return (opt_arg);
1072        opt_arg++;
1073        instance = -1;
1074        targ = -1;
1075        done = FALSE;
1076        /*
1077         * Restore separator that may be in
1078         * the middle of our option argument.
1079         */
1080        tok_end = strchr(opt_arg, '\0');
1081        if (tok_end < end)
1082                *tok_end = ',';
1083        while (!done) {
1084                switch (*opt_arg) {
1085                case '{':
1086                        if (instance == -1) {
1087                                instance = 0;
1088                        } else {
1089                                if (depth > 1) {
1090                                        if (targ == -1)
1091                                                targ = 0;
1092                                } else {
1093                                        printk("Malformed Option %s\n",
1094                                               opt_name);
1095                                        done = TRUE;
1096                                }
1097                        }
1098                        opt_arg++;
1099                        break;
1100                case '}':
1101                        if (targ != -1)
1102                                targ = -1;
1103                        else if (instance != -1)
1104                                instance = -1;
1105                        opt_arg++;
1106                        break;
1107                case ',':
1108                case '.':
1109                        if (instance == -1)
1110                                done = TRUE;
1111                        else if (targ >= 0)
1112                                targ++;
1113                        else if (instance >= 0)
1114                                instance++;
1115                        opt_arg++;
1116                        break;
1117                case '\0':
1118                        done = TRUE;
1119                        break;
1120                default:
1121                        tok_end = end;
1122                        for (i = 0; tok_list[i]; i++) {
1123                                tok_end2 = strchr(opt_arg, tok_list[i]);
1124                                if ((tok_end2) && (tok_end2 < tok_end))
1125                                        tok_end = tok_end2;
1126                        }
1127                        callback(callback_arg, instance, targ,
1128                                 simple_strtol(opt_arg, NULL, 0));
1129                        opt_arg = tok_end;
1130                        break;
1131                }
1132        }
1133        return (opt_arg);
1134}
1135
1136/*
1137 * Handle Linux boot parameters. This routine allows for assigning a value
1138 * to a parameter with a ':' between the parameter and the value.
1139 * ie. aic79xx=stpwlev:1,extended
1140 */
1141static int
1142aic79xx_setup(char *s)
1143{
1144        int     i, n;
1145        char   *p;
1146        char   *end;
1147
1148        static const struct {
1149                const char *name;
1150                uint32_t *flag;
1151        } options[] = {
1152                { "extended", &aic79xx_extended },
1153                { "no_reset", &aic79xx_no_reset },
1154                { "verbose", &aic79xx_verbose },
1155                { "allow_memio", &aic79xx_allow_memio},
1156#ifdef AHD_DEBUG
1157                { "debug", &ahd_debug },
1158#endif
1159                { "periodic_otag", &aic79xx_periodic_otag },
1160                { "pci_parity", &aic79xx_pci_parity },
1161                { "seltime", &aic79xx_seltime },
1162                { "tag_info", NULL },
1163                { "global_tag_depth", NULL},
1164                { "slewrate", NULL },
1165                { "precomp", NULL },
1166                { "amplitude", NULL },
1167                { "slowcrc", &aic79xx_slowcrc },
1168        };
1169
1170        end = strchr(s, '\0');
1171
1172        /*
1173         * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE
1174         * will never be 0 in this case.
1175         */
1176        n = 0;
1177
1178        while ((p = strsep(&s, ",.")) != NULL) {
1179                if (*p == '\0')
1180                        continue;
1181                for (i = 0; i < ARRAY_SIZE(options); i++) {
1182
1183                        n = strlen(options[i].name);
1184                        if (strncmp(options[i].name, p, n) == 0)
1185                                break;
1186                }
1187                if (i == ARRAY_SIZE(options))
1188                        continue;
1189
1190                if (strncmp(p, "global_tag_depth", n) == 0) {
1191                        ahd_linux_setup_tag_info_global(p + n);
1192                } else if (strncmp(p, "tag_info", n) == 0) {
1193                        s = ahd_parse_brace_option("tag_info", p + n, end,
1194                            2, ahd_linux_setup_tag_info, 0);
1195                } else if (strncmp(p, "slewrate", n) == 0) {
1196                        s = ahd_parse_brace_option("slewrate",
1197                            p + n, end, 1, ahd_linux_setup_iocell_info,
1198                            AIC79XX_SLEWRATE_INDEX);
1199                } else if (strncmp(p, "precomp", n) == 0) {
1200                        s = ahd_parse_brace_option("precomp",
1201                            p + n, end, 1, ahd_linux_setup_iocell_info,
1202                            AIC79XX_PRECOMP_INDEX);
1203                } else if (strncmp(p, "amplitude", n) == 0) {
1204                        s = ahd_parse_brace_option("amplitude",
1205                            p + n, end, 1, ahd_linux_setup_iocell_info,
1206                            AIC79XX_AMPLITUDE_INDEX);
1207                } else if (p[n] == ':') {
1208                        *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
1209                } else if (!strncmp(p, "verbose", n)) {
1210                        *(options[i].flag) = 1;
1211                } else {
1212                        *(options[i].flag) ^= 0xFFFFFFFF;
1213                }
1214        }
1215        return 1;
1216}
1217
1218__setup("aic79xx=", aic79xx_setup);
1219
1220uint32_t aic79xx_verbose;
1221
1222int
1223ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
1224{
1225        char    buf[80];
1226        struct  Scsi_Host *host;
1227        char    *new_name;
1228        u_long  s;
1229        int     retval;
1230
1231        template->name = ahd->description;
1232        host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
1233        if (host == NULL)
1234                return (ENOMEM);
1235
1236        *((struct ahd_softc **)host->hostdata) = ahd;
1237        ahd->platform_data->host = host;
1238        host->can_queue = AHD_MAX_QUEUE;
1239        host->cmd_per_lun = 2;
1240        host->sg_tablesize = AHD_NSEG;
1241        host->this_id = ahd->our_id;
1242        host->irq = ahd->platform_data->irq;
1243        host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
1244        host->max_lun = AHD_NUM_LUNS;
1245        host->max_channel = 0;
1246        host->sg_tablesize = AHD_NSEG;
1247        ahd_lock(ahd, &s);
1248        ahd_set_unit(ahd, ahd_linux_unit++);
1249        ahd_unlock(ahd, &s);
1250        sprintf(buf, "scsi%d", host->host_no);
1251        new_name = kmalloc(strlen(buf) + 1, GFP_ATOMIC);
1252        if (new_name != NULL) {
1253                strcpy(new_name, buf);
1254                ahd_set_name(ahd, new_name);
1255        }
1256        host->unique_id = ahd->unit;
1257        ahd_linux_initialize_scsi_bus(ahd);
1258        ahd_intr_enable(ahd, TRUE);
1259
1260        host->transportt = ahd_linux_transport_template;
1261
1262        retval = scsi_add_host(host, &ahd->dev_softc->dev);
1263        if (retval) {
1264                printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
1265                scsi_host_put(host);
1266                return retval;
1267        }
1268
1269        scsi_scan_host(host);
1270        return 0;
1271}
1272
1273/*
1274 * Place the SCSI bus into a known state by either resetting it,
1275 * or forcing transfer negotiations on the next command to any
1276 * target.
1277 */
1278static void
1279ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
1280{
1281        u_int target_id;
1282        u_int numtarg;
1283        unsigned long s;
1284
1285        target_id = 0;
1286        numtarg = 0;
1287
1288        if (aic79xx_no_reset != 0)
1289                ahd->flags &= ~AHD_RESET_BUS_A;
1290
1291        if ((ahd->flags & AHD_RESET_BUS_A) != 0)
1292                ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
1293        else
1294                numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
1295
1296        ahd_lock(ahd, &s);
1297
1298        /*
1299         * Force negotiation to async for all targets that
1300         * will not see an initial bus reset.
1301         */
1302        for (; target_id < numtarg; target_id++) {
1303                struct ahd_devinfo devinfo;
1304                struct ahd_initiator_tinfo *tinfo;
1305                struct ahd_tmode_tstate *tstate;
1306
1307                tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1308                                            target_id, &tstate);
1309                ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
1310                                    CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
1311                ahd_update_neg_request(ahd, &devinfo, tstate,
1312                                       tinfo, AHD_NEG_ALWAYS);
1313        }
1314        ahd_unlock(ahd, &s);
1315        /* Give the bus some time to recover */
1316        if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
1317                ahd_freeze_simq(ahd);
1318                msleep(AIC79XX_RESET_DELAY);
1319                ahd_release_simq(ahd);
1320        }
1321}
1322
1323int
1324ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
1325{
1326        ahd->platform_data =
1327            kmalloc(sizeof(struct ahd_platform_data), GFP_ATOMIC);
1328        if (ahd->platform_data == NULL)
1329                return (ENOMEM);
1330        memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
1331        ahd->platform_data->irq = AHD_LINUX_NOIRQ;
1332        ahd_lockinit(ahd);
1333        ahd->seltime = (aic79xx_seltime & 0x3) << 4;
1334        return (0);
1335}
1336
1337void
1338ahd_platform_free(struct ahd_softc *ahd)
1339{
1340        struct scsi_target *starget;
1341        int i;
1342
1343        if (ahd->platform_data != NULL) {
1344                /* destroy all of the device and target objects */
1345                for (i = 0; i < AHD_NUM_TARGETS; i++) {
1346                        starget = ahd->platform_data->starget[i];
1347                        if (starget != NULL) {
1348                                ahd->platform_data->starget[i] = NULL;
1349                        }
1350                }
1351
1352                if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
1353                        free_irq(ahd->platform_data->irq, ahd);
1354                if (ahd->tags[0] == BUS_SPACE_PIO
1355                 && ahd->bshs[0].ioport != 0)
1356                        release_region(ahd->bshs[0].ioport, 256);
1357                if (ahd->tags[1] == BUS_SPACE_PIO
1358                 && ahd->bshs[1].ioport != 0)
1359                        release_region(ahd->bshs[1].ioport, 256);
1360                if (ahd->tags[0] == BUS_SPACE_MEMIO
1361                 && ahd->bshs[0].maddr != NULL) {
1362                        iounmap(ahd->bshs[0].maddr);
1363                        release_mem_region(ahd->platform_data->mem_busaddr,
1364                                           0x1000);
1365                }
1366                if (ahd->platform_data->host)
1367                        scsi_host_put(ahd->platform_data->host);
1368
1369                kfree(ahd->platform_data);
1370        }
1371}
1372
1373void
1374ahd_platform_init(struct ahd_softc *ahd)
1375{
1376        /*
1377         * Lookup and commit any modified IO Cell options.
1378         */
1379        if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
1380                const struct ahd_linux_iocell_opts *iocell_opts;
1381
1382                iocell_opts = &aic79xx_iocell_info[ahd->unit];
1383                if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
1384                        AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
1385                if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
1386                        AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
1387                if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
1388                        AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
1389        }
1390
1391}
1392
1393void
1394ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
1395{
1396        ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1397                                SCB_GET_CHANNEL(ahd, scb),
1398                                SCB_GET_LUN(scb), SCB_LIST_NULL,
1399                                ROLE_UNKNOWN, CAM_REQUEUE_REQ);
1400}
1401
1402void
1403ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
1404                      struct ahd_devinfo *devinfo, ahd_queue_alg alg)
1405{
1406        struct ahd_linux_device *dev;
1407        int was_queuing;
1408        int now_queuing;
1409
1410        if (sdev == NULL)
1411                return;
1412
1413        dev = scsi_transport_device_data(sdev);
1414
1415        if (dev == NULL)
1416                return;
1417        was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
1418        switch (alg) {
1419        default:
1420        case AHD_QUEUE_NONE:
1421                now_queuing = 0;
1422                break; 
1423        case AHD_QUEUE_BASIC:
1424                now_queuing = AHD_DEV_Q_BASIC;
1425                break;
1426        case AHD_QUEUE_TAGGED:
1427                now_queuing = AHD_DEV_Q_TAGGED;
1428                break;
1429        }
1430        if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
1431         && (was_queuing != now_queuing)
1432         && (dev->active != 0)) {
1433                dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
1434                dev->qfrozen++;
1435        }
1436
1437        dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
1438        if (now_queuing) {
1439                u_int usertags;
1440
1441                usertags = ahd_linux_user_tagdepth(ahd, devinfo);
1442                if (!was_queuing) {
1443                        /*
1444                         * Start out agressively and allow our
1445                         * dynamic queue depth algorithm to take
1446                         * care of the rest.
1447                         */
1448                        dev->maxtags = usertags;
1449                        dev->openings = dev->maxtags - dev->active;
1450                }
1451                if (dev->maxtags == 0) {
1452                        /*
1453                         * Queueing is disabled by the user.
1454                         */
1455                        dev->openings = 1;
1456                } else if (alg == AHD_QUEUE_TAGGED) {
1457                        dev->flags |= AHD_DEV_Q_TAGGED;
1458                        if (aic79xx_periodic_otag != 0)
1459                                dev->flags |= AHD_DEV_PERIODIC_OTAG;
1460                } else
1461                        dev->flags |= AHD_DEV_Q_BASIC;
1462        } else {
1463                /* We can only have one opening. */
1464                dev->maxtags = 0;
1465                dev->openings =  1 - dev->active;
1466        }
1467
1468        switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
1469        case AHD_DEV_Q_BASIC:
1470                scsi_set_tag_type(sdev, MSG_SIMPLE_TASK);
1471                scsi_activate_tcq(sdev, dev->openings + dev->active);
1472                break;
1473        case AHD_DEV_Q_TAGGED:
1474                scsi_set_tag_type(sdev, MSG_ORDERED_TASK);
1475                scsi_activate_tcq(sdev, dev->openings + dev->active);
1476                break;
1477        default:
1478                /*
1479                 * We allow the OS to queue 2 untagged transactions to
1480                 * us at any time even though we can only execute them
1481                 * serially on the controller/device.  This should
1482                 * remove some latency.
1483                 */
1484                scsi_deactivate_tcq(sdev, 1);
1485                break;
1486        }
1487}
1488
1489int
1490ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
1491                        int lun, u_int tag, role_t role, uint32_t status)
1492{
1493        return 0;
1494}
1495
1496static u_int
1497ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
1498{
1499        static int warned_user;
1500        u_int tags;
1501
1502        tags = 0;
1503        if ((ahd->user_discenable & devinfo->target_mask) != 0) {
1504                if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) {
1505
1506                        if (warned_user == 0) {
1507                                printk(KERN_WARNING
1508"aic79xx: WARNING: Insufficient tag_info instances\n"
1509"aic79xx: for installed controllers.  Using defaults\n"
1510"aic79xx: Please update the aic79xx_tag_info array in\n"
1511"aic79xx: the aic79xx_osm.c source file.\n");
1512                                warned_user++;
1513                        }
1514                        tags = AHD_MAX_QUEUE;
1515                } else {
1516                        adapter_tag_info_t *tag_info;
1517
1518                        tag_info = &aic79xx_tag_info[ahd->unit];
1519                        tags = tag_info->tag_commands[devinfo->target_offset];
1520                        if (tags > AHD_MAX_QUEUE)
1521                                tags = AHD_MAX_QUEUE;
1522                }
1523        }
1524        return (tags);
1525}
1526
1527/*
1528 * Determines the queue depth for a given device.
1529 */
1530static void
1531ahd_linux_device_queue_depth(struct scsi_device *sdev)
1532{
1533        struct  ahd_devinfo devinfo;
1534        u_int   tags;
1535        struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
1536
1537        ahd_compile_devinfo(&devinfo,
1538                            ahd->our_id,
1539                            sdev->sdev_target->id, sdev->lun,
1540                            sdev->sdev_target->channel == 0 ? 'A' : 'B',
1541                            ROLE_INITIATOR);
1542        tags = ahd_linux_user_tagdepth(ahd, &devinfo);
1543        if (tags != 0 && sdev->tagged_supported != 0) {
1544
1545                ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED);
1546                ahd_send_async(ahd, devinfo.channel, devinfo.target,
1547                               devinfo.lun, AC_TRANSFER_NEG);
1548                ahd_print_devinfo(ahd, &devinfo);
1549                printk("Tagged Queuing enabled.  Depth %d\n", tags);
1550        } else {
1551                ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE);
1552                ahd_send_async(ahd, devinfo.channel, devinfo.target,
1553                               devinfo.lun, AC_TRANSFER_NEG);
1554        }
1555}
1556
1557static int
1558ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
1559                      struct scsi_cmnd *cmd)
1560{
1561        struct   scb *scb;
1562        struct   hardware_scb *hscb;
1563        struct   ahd_initiator_tinfo *tinfo;
1564        struct   ahd_tmode_tstate *tstate;
1565        u_int    col_idx;
1566        uint16_t mask;
1567        unsigned long flags;
1568        int nseg;
1569
1570        nseg = scsi_dma_map(cmd);
1571        if (nseg < 0)
1572                return SCSI_MLQUEUE_HOST_BUSY;
1573
1574        ahd_lock(ahd, &flags);
1575
1576        /*
1577         * Get an scb to use.
1578         */
1579        tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1580                                    cmd->device->id, &tstate);
1581        if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
1582         || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
1583                col_idx = AHD_NEVER_COL_IDX;
1584        } else {
1585                col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
1586                                            cmd->device->lun);
1587        }
1588        if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
1589                ahd->flags |= AHD_RESOURCE_SHORTAGE;
1590                ahd_unlock(ahd, &flags);
1591                scsi_dma_unmap(cmd);
1592                return SCSI_MLQUEUE_HOST_BUSY;
1593        }
1594
1595        scb->io_ctx = cmd;
1596        scb->platform_data->dev = dev;
1597        hscb = scb->hscb;
1598        cmd->host_scribble = (char *)scb;
1599
1600        /*
1601         * Fill out basics of the HSCB.
1602         */
1603        hscb->control = 0;
1604        hscb->scsiid = BUILD_SCSIID(ahd, cmd);
1605        hscb->lun = cmd->device->lun;
1606        scb->hscb->task_management = 0;
1607        mask = SCB_GET_TARGET_MASK(ahd, scb);
1608
1609        if ((ahd->user_discenable & mask) != 0)
1610                hscb->control |= DISCENB;
1611
1612        if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
1613                scb->flags |= SCB_PACKETIZED;
1614
1615        if ((tstate->auto_negotiate & mask) != 0) {
1616                scb->flags |= SCB_AUTO_NEGOTIATE;
1617                scb->hscb->control |= MK_MESSAGE;
1618        }
1619
1620        if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
1621                int     msg_bytes;
1622                uint8_t tag_msgs[2];
1623
1624                msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
1625                if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
1626                        hscb->control |= tag_msgs[0];
1627                        if (tag_msgs[0] == MSG_ORDERED_TASK)
1628                                dev->commands_since_idle_or_otag = 0;
1629                } else
1630                if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
1631                 && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
1632                        hscb->control |= MSG_ORDERED_TASK;
1633                        dev->commands_since_idle_or_otag = 0;
1634                } else {
1635                        hscb->control |= MSG_SIMPLE_TASK;
1636                }
1637        }
1638
1639        hscb->cdb_len = cmd->cmd_len;
1640        memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
1641
1642        scb->platform_data->xfer_len = 0;
1643        ahd_set_residual(scb, 0);
1644        ahd_set_sense_residual(scb, 0);
1645        scb->sg_count = 0;
1646
1647        if (nseg > 0) {
1648                void *sg = scb->sg_list;
1649                struct scatterlist *cur_seg;
1650                int i;
1651
1652                scb->platform_data->xfer_len = 0;
1653
1654                scsi_for_each_sg(cmd, cur_seg, nseg, i) {
1655                        dma_addr_t addr;
1656                        bus_size_t len;
1657
1658                        addr = sg_dma_address(cur_seg);
1659                        len = sg_dma_len(cur_seg);
1660                        scb->platform_data->xfer_len += len;
1661                        sg = ahd_sg_setup(ahd, scb, sg, addr, len,
1662                                          i == (nseg - 1));
1663                }
1664        }
1665
1666        LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
1667        dev->openings--;
1668        dev->active++;
1669        dev->commands_issued++;
1670
1671        if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
1672                dev->commands_since_idle_or_otag++;
1673        scb->flags |= SCB_ACTIVE;
1674        ahd_queue_scb(ahd, scb);
1675
1676        ahd_unlock(ahd, &flags);
1677
1678        return 0;
1679}
1680
1681/*
1682 * SCSI controller interrupt handler.
1683 */
1684irqreturn_t
1685ahd_linux_isr(int irq, void *dev_id)
1686{
1687        struct  ahd_softc *ahd;
1688        u_long  flags;
1689        int     ours;
1690
1691        ahd = (struct ahd_softc *) dev_id;
1692        ahd_lock(ahd, &flags); 
1693        ours = ahd_intr(ahd);
1694        ahd_unlock(ahd, &flags);
1695        return IRQ_RETVAL(ours);
1696}
1697
1698void
1699ahd_send_async(struct ahd_softc *ahd, char channel,
1700               u_int target, u_int lun, ac_code code)
1701{
1702        switch (code) {
1703        case AC_TRANSFER_NEG:
1704        {
1705                char    buf[80];
1706                struct  scsi_target *starget;
1707                struct  info_str info;
1708                struct  ahd_initiator_tinfo *tinfo;
1709                struct  ahd_tmode_tstate *tstate;
1710                unsigned int target_ppr_options;
1711
1712                BUG_ON(target == CAM_TARGET_WILDCARD);
1713
1714                info.buffer = buf;
1715                info.length = sizeof(buf);
1716                info.offset = 0;
1717                info.pos = 0;
1718                tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
1719                                            target, &tstate);
1720
1721                /*
1722                 * Don't bother reporting results while
1723                 * negotiations are still pending.
1724                 */
1725                if (tinfo->curr.period != tinfo->goal.period
1726                 || tinfo->curr.width != tinfo->goal.width
1727                 || tinfo->curr.offset != tinfo->goal.offset
1728                 || tinfo->curr.ppr_options != tinfo->goal.ppr_options)
1729                        if (bootverbose == 0)
1730                                break;
1731
1732                /*
1733                 * Don't bother reporting results that
1734                 * are identical to those last reported.
1735                 */
1736                starget = ahd->platform_data->starget[target];
1737                if (starget == NULL)
1738                        break;
1739
1740                target_ppr_options =
1741                        (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
1742                        + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
1743                        + (spi_iu(starget) ?  MSG_EXT_PPR_IU_REQ : 0)
1744                        + (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
1745                        + (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
1746                        + (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
1747                        + (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
1748                        + (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
1749
1750                if (tinfo->curr.period == spi_period(starget)
1751                    && tinfo->curr.width == spi_width(starget)
1752                    && tinfo->curr.offset == spi_offset(starget)
1753                 && tinfo->curr.ppr_options == target_ppr_options)
1754                        if (bootverbose == 0)
1755                                break;
1756
1757                spi_period(starget) = tinfo->curr.period;
1758                spi_width(starget) = tinfo->curr.width;
1759                spi_offset(starget) = tinfo->curr.offset;
1760                spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
1761                spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
1762                spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
1763                spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
1764                spi_pcomp_en(starget) =  tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
1765                spi_rti(starget) =  tinfo->curr.ppr_options &  MSG_EXT_PPR_RTI ? 1 : 0;
1766                spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
1767                spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
1768                spi_display_xfer_agreement(starget);
1769                break;
1770        }
1771        case AC_SENT_BDR:
1772        {
1773                WARN_ON(lun != CAM_LUN_WILDCARD);
1774                scsi_report_device_reset(ahd->platform_data->host,
1775                                         channel - 'A', target);
1776                break;
1777        }
1778        case AC_BUS_RESET:
1779                if (ahd->platform_data->host != NULL) {
1780                        scsi_report_bus_reset(ahd->platform_data->host,
1781                                              channel - 'A');
1782                }
1783                break;
1784        default:
1785                panic("ahd_send_async: Unexpected async event");
1786        }
1787}
1788
1789/*
1790 * Calls the higher level scsi done function and frees the scb.
1791 */
1792void
1793ahd_done(struct ahd_softc *ahd, struct scb *scb)
1794{
1795        struct scsi_cmnd *cmd;
1796        struct    ahd_linux_device *dev;
1797
1798        if ((scb->flags & SCB_ACTIVE) == 0) {
1799                printk("SCB %d done'd twice\n", SCB_GET_TAG(scb));
1800                ahd_dump_card_state(ahd);
1801                panic("Stopping for safety");
1802        }
1803        LIST_REMOVE(scb, pending_links);
1804        cmd = scb->io_ctx;
1805        dev = scb->platform_data->dev;
1806        dev->active--;
1807        dev->openings++;
1808        if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
1809                cmd->result &= ~(CAM_DEV_QFRZN << 16);
1810                dev->qfrozen--;
1811        }
1812        ahd_linux_unmap_scb(ahd, scb);
1813
1814        /*
1815         * Guard against stale sense data.
1816         * The Linux mid-layer assumes that sense
1817         * was retrieved anytime the first byte of
1818         * the sense buffer looks "sane".
1819         */
1820        cmd->sense_buffer[0] = 0;
1821        if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
1822                uint32_t amount_xferred;
1823
1824                amount_xferred =
1825                    ahd_get_transfer_length(scb) - ahd_get_residual(scb);
1826                if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
1827#ifdef AHD_DEBUG
1828                        if ((ahd_debug & AHD_SHOW_MISC) != 0) {
1829                                ahd_print_path(ahd, scb);
1830                                printk("Set CAM_UNCOR_PARITY\n");
1831                        }
1832#endif
1833                        ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
1834#ifdef AHD_REPORT_UNDERFLOWS
1835                /*
1836                 * This code is disabled by default as some
1837                 * clients of the SCSI system do not properly
1838                 * initialize the underflow parameter.  This
1839                 * results in spurious termination of commands
1840                 * that complete as expected (e.g. underflow is
1841                 * allowed as command can return variable amounts
1842                 * of data.
1843                 */
1844                } else if (amount_xferred < scb->io_ctx->underflow) {
1845                        u_int i;
1846
1847                        ahd_print_path(ahd, scb);
1848                        printk("CDB:");
1849                        for (i = 0; i < scb->io_ctx->cmd_len; i++)
1850                                printk(" 0x%x", scb->io_ctx->cmnd[i]);
1851                        printk("\n");
1852                        ahd_print_path(ahd, scb);
1853                        printk("Saw underflow (%ld of %ld bytes). "
1854                               "Treated as error\n",
1855                                ahd_get_residual(scb),
1856                                ahd_get_transfer_length(scb));
1857                        ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1858#endif
1859                } else {
1860                        ahd_set_transaction_status(scb, CAM_REQ_CMP);
1861                }
1862        } else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
1863                ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
1864        }
1865
1866        if (dev->openings == 1
1867         && ahd_get_transaction_status(scb) == CAM_REQ_CMP
1868         && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
1869                dev->tag_success_count++;
1870        /*
1871         * Some devices deal with temporary internal resource
1872         * shortages by returning queue full.  When the queue
1873         * full occurrs, we throttle back.  Slowly try to get
1874         * back to our previous queue depth.
1875         */
1876        if ((dev->openings + dev->active) < dev->maxtags
1877         && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
1878                dev->tag_success_count = 0;
1879                dev->openings++;
1880        }
1881
1882        if (dev->active == 0)
1883                dev->commands_since_idle_or_otag = 0;
1884
1885        if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
1886                printk("Recovery SCB completes\n");
1887                if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
1888                 || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
1889                        ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
1890
1891                if (ahd->platform_data->eh_done)
1892                        complete(ahd->platform_data->eh_done);
1893        }
1894
1895        ahd_free_scb(ahd, scb);
1896        ahd_linux_queue_cmd_complete(ahd, cmd);
1897}
1898
1899static void
1900ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
1901                             struct scsi_device *sdev, struct scb *scb)
1902{
1903        struct  ahd_devinfo devinfo;
1904        struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
1905
1906        ahd_compile_devinfo(&devinfo,
1907                            ahd->our_id,
1908                            sdev->sdev_target->id, sdev->lun,
1909                            sdev->sdev_target->channel == 0 ? 'A' : 'B',
1910                            ROLE_INITIATOR);
1911        
1912        /*
1913         * We don't currently trust the mid-layer to
1914         * properly deal with queue full or busy.  So,
1915         * when one occurs, we tell the mid-layer to
1916         * unconditionally requeue the command to us
1917         * so that we can retry it ourselves.  We also
1918         * implement our own throttling mechanism so
1919         * we don't clobber the device with too many
1920         * commands.
1921         */
1922        switch (ahd_get_scsi_status(scb)) {
1923        default:
1924                break;
1925        case SCSI_STATUS_CHECK_COND:
1926        case SCSI_STATUS_CMD_TERMINATED:
1927        {
1928                struct scsi_cmnd *cmd;
1929
1930                /*
1931                 * Copy sense information to the OS's cmd
1932                 * structure if it is available.
1933                 */
1934                cmd = scb->io_ctx;
1935                if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
1936                        struct scsi_status_iu_header *siu;
1937                        u_int sense_size;
1938                        u_int sense_offset;
1939
1940                        if (scb->flags & SCB_SENSE) {
1941                                sense_size = min(sizeof(struct scsi_sense_data)
1942                                               - ahd_get_sense_residual(scb),
1943                                                 (u_long)SCSI_SENSE_BUFFERSIZE);
1944                                sense_offset = 0;
1945                        } else {
1946                                /*
1947                                 * Copy only the sense data into the provided
1948                                 * buffer.
1949                                 */
1950                                siu = (struct scsi_status_iu_header *)
1951                                    scb->sense_data;
1952                                sense_size = min_t(size_t,
1953                                                scsi_4btoul(siu->sense_length),
1954                                                SCSI_SENSE_BUFFERSIZE);
1955                                sense_offset = SIU_SENSE_OFFSET(siu);
1956                        }
1957
1958                        memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1959                        memcpy(cmd->sense_buffer,
1960                               ahd_get_sense_buf(ahd, scb)
1961                               + sense_offset, sense_size);
1962                        cmd->result |= (DRIVER_SENSE << 24);
1963
1964#ifdef AHD_DEBUG
1965                        if (ahd_debug & AHD_SHOW_SENSE) {
1966                                int i;
1967
1968                                printk("Copied %d bytes of sense data at %d:",
1969                                       sense_size, sense_offset);
1970                                for (i = 0; i < sense_size; i++) {
1971                                        if ((i & 0xF) == 0)
1972                                                printk("\n");
1973                                        printk("0x%x ", cmd->sense_buffer[i]);
1974                                }
1975                                printk("\n");
1976                        }
1977#endif
1978                }
1979                break;
1980        }
1981        case SCSI_STATUS_QUEUE_FULL:
1982                /*
1983                 * By the time the core driver has returned this
1984                 * command, all other commands that were queued
1985                 * to us but not the device have been returned.
1986                 * This ensures that dev->active is equal to
1987                 * the number of commands actually queued to
1988                 * the device.
1989                 */
1990                dev->tag_success_count = 0;
1991                if (dev->active != 0) {
1992                        /*
1993                         * Drop our opening count to the number
1994                         * of commands currently outstanding.
1995                         */
1996                        dev->openings = 0;
1997#ifdef AHD_DEBUG
1998                        if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
1999                                ahd_print_path(ahd, scb);
2000                                printk("Dropping tag count to %d\n",
2001                                       dev->active);
2002                        }
2003#endif
2004                        if (dev->active == dev->tags_on_last_queuefull) {
2005
2006                                dev->last_queuefull_same_count++;
2007                                /*
2008                                 * If we repeatedly see a queue full
2009                                 * at the same queue depth, this
2010                                 * device has a fixed number of tag
2011                                 * slots.  Lock in this tag depth
2012                                 * so we stop seeing queue fulls from
2013                                 * this device.
2014                                 */
2015                                if (dev->last_queuefull_same_count
2016                                 == AHD_LOCK_TAGS_COUNT) {
2017                                        dev->maxtags = dev->active;
2018                                        ahd_print_path(ahd, scb);
2019                                        printk("Locking max tag count at %d\n",
2020                                               dev->active);
2021                                }
2022                        } else {
2023                                dev->tags_on_last_queuefull = dev->active;
2024                                dev->last_queuefull_same_count = 0;
2025                        }
2026                        ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
2027                        ahd_set_scsi_status(scb, SCSI_STATUS_OK);
2028                        ahd_platform_set_tags(ahd, sdev, &devinfo,
2029                                     (dev->flags & AHD_DEV_Q_BASIC)
2030                                   ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2031                        break;
2032                }
2033                /*
2034                 * Drop down to a single opening, and treat this
2035                 * as if the target returned BUSY SCSI status.
2036                 */
2037                dev->openings = 1;
2038                ahd_platform_set_tags(ahd, sdev, &devinfo,
2039                             (dev->flags & AHD_DEV_Q_BASIC)
2040                           ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
2041                ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
2042        }
2043}
2044
2045static void
2046ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
2047{
2048        int status;
2049        int new_status = DID_OK;
2050        int do_fallback = 0;
2051        int scsi_status;
2052
2053        /*
2054         * Map CAM error codes into Linux Error codes.  We
2055         * avoid the conversion so that the DV code has the
2056         * full error information available when making
2057         * state change decisions.
2058         */
2059
2060        status = ahd_cmd_get_transaction_status(cmd);
2061        switch (status) {
2062        case CAM_REQ_INPROG:
2063        case CAM_REQ_CMP:
2064                new_status = DID_OK;
2065                break;
2066        case CAM_AUTOSENSE_FAIL:
2067                new_status = DID_ERROR;
2068                /* Fallthrough */
2069        case CAM_SCSI_STATUS_ERROR:
2070                scsi_status = ahd_cmd_get_scsi_status(cmd);
2071
2072                switch(scsi_status) {
2073                case SCSI_STATUS_CMD_TERMINATED:
2074                case SCSI_STATUS_CHECK_COND:
2075                        if ((cmd->result >> 24) != DRIVER_SENSE) {
2076                                do_fallback = 1;
2077                        } else {
2078                                struct scsi_sense_data *sense;
2079                                
2080                                sense = (struct scsi_sense_data *)
2081                                        cmd->sense_buffer;
2082                                if (sense->extra_len >= 5 &&
2083                                    (sense->add_sense_code == 0x47
2084                                     || sense->add_sense_code == 0x48))
2085                                        do_fallback = 1;
2086                        }
2087                        break;
2088                default:
2089                        break;
2090                }
2091                break;
2092        case CAM_REQ_ABORTED:
2093                new_status = DID_ABORT;
2094                break;
2095        case CAM_BUSY:
2096                new_status = DID_BUS_BUSY;
2097                break;
2098        case CAM_REQ_INVALID:
2099        case CAM_PATH_INVALID:
2100                new_status = DID_BAD_TARGET;
2101                break;
2102        case CAM_SEL_TIMEOUT:
2103                new_status = DID_NO_CONNECT;
2104                break;
2105        case CAM_SCSI_BUS_RESET:
2106        case CAM_BDR_SENT:
2107                new_status = DID_RESET;
2108                break;
2109        case CAM_UNCOR_PARITY:
2110                new_status = DID_PARITY;
2111                do_fallback = 1;
2112                break;
2113        case CAM_CMD_TIMEOUT:
2114                new_status = DID_TIME_OUT;
2115                do_fallback = 1;
2116                break;
2117        case CAM_REQ_CMP_ERR:
2118        case CAM_UNEXP_BUSFREE:
2119        case CAM_DATA_RUN_ERR:
2120                new_status = DID_ERROR;
2121                do_fallback = 1;
2122                break;
2123        case CAM_UA_ABORT:
2124        case CAM_NO_HBA:
2125        case CAM_SEQUENCE_FAIL:
2126        case CAM_CCB_LEN_ERR:
2127        case CAM_PROVIDE_FAIL:
2128        case CAM_REQ_TERMIO:
2129        case CAM_UNREC_HBA_ERROR:
2130        case CAM_REQ_TOO_BIG:
2131                new_status = DID_ERROR;
2132                break;
2133        case CAM_REQUEUE_REQ:
2134                new_status = DID_REQUEUE;
2135                break;
2136        default:
2137                /* We should never get here */
2138                new_status = DID_ERROR;
2139                break;
2140        }
2141
2142        if (do_fallback) {
2143                printk("%s: device overrun (status %x) on %d:%d:%d\n",
2144                       ahd_name(ahd), status, cmd->device->channel,
2145                       cmd->device->id, cmd->device->lun);
2146        }
2147
2148        ahd_cmd_set_transaction_status(cmd, new_status);
2149
2150        cmd->scsi_done(cmd);
2151}
2152
2153static void
2154ahd_freeze_simq(struct ahd_softc *ahd)
2155{
2156        scsi_block_requests(ahd->platform_data->host);
2157}
2158
2159static void
2160ahd_release_simq(struct ahd_softc *ahd)
2161{
2162        scsi_unblock_requests(ahd->platform_data->host);
2163}
2164
2165static int
2166ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd)
2167{
2168        struct ahd_softc *ahd;
2169        struct ahd_linux_device *dev;
2170        struct scb *pending_scb;
2171        u_int  saved_scbptr;
2172        u_int  active_scbptr;
2173        u_int  last_phase;
2174        u_int  saved_scsiid;
2175        u_int  cdb_byte;
2176        int    retval;
2177        int    was_paused;
2178        int    paused;
2179        int    wait;
2180        int    disconnected;
2181        ahd_mode_state saved_modes;
2182        unsigned long flags;
2183
2184        pending_scb = NULL;
2185        paused = FALSE;
2186        wait = FALSE;
2187        ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
2188
2189        scmd_printk(KERN_INFO, cmd,
2190                    "Attempting to queue an ABORT message:");
2191
2192        printk("CDB:");
2193        for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
2194                printk(" 0x%x", cmd->cmnd[cdb_byte]);
2195        printk("\n");
2196
2197        ahd_lock(ahd, &flags);
2198
2199        /*
2200         * First determine if we currently own this command.
2201         * Start by searching the device queue.  If not found
2202         * there, check the pending_scb list.  If not found
2203         * at all, and the system wanted us to just abort the
2204         * command, return success.
2205         */
2206        dev = scsi_transport_device_data(cmd->device);
2207
2208        if (dev == NULL) {
2209                /*
2210                 * No target device for this command exists,
2211                 * so we must not still own the command.
2212                 */
2213                scmd_printk(KERN_INFO, cmd, "Is not an active device\n");
2214                retval = SUCCESS;
2215                goto no_cmd;
2216        }
2217
2218        /*
2219         * See if we can find a matching cmd in the pending list.
2220         */
2221        LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2222                if (pending_scb->io_ctx == cmd)
2223                        break;
2224        }
2225
2226        if (pending_scb == NULL) {
2227                scmd_printk(KERN_INFO, cmd, "Command not found\n");
2228                goto no_cmd;
2229        }
2230
2231        if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
2232                /*
2233                 * We can't queue two recovery actions using the same SCB
2234                 */
2235                retval = FAILED;
2236                goto  done;
2237        }
2238
2239        /*
2240         * Ensure that the card doesn't do anything
2241         * behind our back.  Also make sure that we
2242         * didn't "just" miss an interrupt that would
2243         * affect this cmd.
2244         */
2245        was_paused = ahd_is_paused(ahd);
2246        ahd_pause_and_flushwork(ahd);
2247        paused = TRUE;
2248
2249        if ((pending_scb->flags & SCB_ACTIVE) == 0) {
2250                scmd_printk(KERN_INFO, cmd, "Command already completed\n");
2251                goto no_cmd;
2252        }
2253
2254        printk("%s: At time of recovery, card was %spaused\n",
2255               ahd_name(ahd), was_paused ? "" : "not ");
2256        ahd_dump_card_state(ahd);
2257
2258        disconnected = TRUE;
2259        if (ahd_search_qinfifo(ahd, cmd->device->id, 
2260                               cmd->device->channel + 'A',
2261                               cmd->device->lun, 
2262                               pending_scb->hscb->tag,
2263                               ROLE_INITIATOR, CAM_REQ_ABORTED,
2264                               SEARCH_COMPLETE) > 0) {
2265                printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2266                       ahd_name(ahd), cmd->device->channel, 
2267                       cmd->device->id, cmd->device->lun);
2268                retval = SUCCESS;
2269                goto done;
2270        }
2271
2272        saved_modes = ahd_save_modes(ahd);
2273        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2274        last_phase = ahd_inb(ahd, LASTPHASE);
2275        saved_scbptr = ahd_get_scbptr(ahd);
2276        active_scbptr = saved_scbptr;
2277        if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
2278                struct scb *bus_scb;
2279
2280                bus_scb = ahd_lookup_scb(ahd, active_scbptr);
2281                if (bus_scb == pending_scb)
2282                        disconnected = FALSE;
2283        }
2284
2285        /*
2286         * At this point, pending_scb is the scb associated with the
2287         * passed in command.  That command is currently active on the
2288         * bus or is in the disconnected state.
2289         */
2290        saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2291        if (last_phase != P_BUSFREE
2292            && SCB_GET_TAG(pending_scb) == active_scbptr) {
2293
2294                /*
2295                 * We're active on the bus, so assert ATN
2296                 * and hope that the target responds.
2297                 */
2298                pending_scb = ahd_lookup_scb(ahd, active_scbptr);
2299                pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2300                ahd_outb(ahd, MSG_OUT, HOST_MSG);
2301                ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
2302                scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
2303                wait = TRUE;
2304        } else if (disconnected) {
2305
2306                /*
2307                 * Actually re-queue this SCB in an attempt
2308                 * to select the device before it reconnects.
2309                 */
2310                pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2311                ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
2312                pending_scb->hscb->cdb_len = 0;
2313                pending_scb->hscb->task_attribute = 0;
2314                pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
2315
2316                if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
2317                        /*
2318                         * Mark the SCB has having an outstanding
2319                         * task management function.  Should the command
2320                         * complete normally before the task management
2321                         * function can be sent, the host will be notified
2322                         * to abort our requeued SCB.
2323                         */
2324                        ahd_outb(ahd, SCB_TASK_MANAGEMENT,
2325                                 pending_scb->hscb->task_management);
2326                } else {
2327                        /*
2328                         * If non-packetized, set the MK_MESSAGE control
2329                         * bit indicating that we desire to send a message.
2330                         * We also set the disconnected flag since there is
2331                         * no guarantee that our SCB control byte matches
2332                         * the version on the card.  We don't want the
2333                         * sequencer to abort the command thinking an
2334                         * unsolicited reselection occurred.
2335                         */
2336                        pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
2337
2338                        /*
2339                         * The sequencer will never re-reference the
2340                         * in-core SCB.  To make sure we are notified
2341                         * during reselection, set the MK_MESSAGE flag in
2342                         * the card's copy of the SCB.
2343                         */
2344                        ahd_outb(ahd, SCB_CONTROL,
2345                                 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
2346                }
2347
2348                /*
2349                 * Clear out any entries in the QINFIFO first
2350                 * so we are the next SCB for this target
2351                 * to run.
2352                 */
2353                ahd_search_qinfifo(ahd, cmd->device->id,
2354                                   cmd->device->channel + 'A', cmd->device->lun,
2355                                   SCB_LIST_NULL, ROLE_INITIATOR,
2356                                   CAM_REQUEUE_REQ, SEARCH_COMPLETE);
2357                ahd_qinfifo_requeue_tail(ahd, pending_scb);
2358                ahd_set_scbptr(ahd, saved_scbptr);
2359                ahd_print_path(ahd, pending_scb);
2360                printk("Device is disconnected, re-queuing SCB\n");
2361                wait = TRUE;
2362        } else {
2363                scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
2364                retval = FAILED;
2365                goto done;
2366        }
2367
2368no_cmd:
2369        /*
2370         * Our assumption is that if we don't have the command, no
2371         * recovery action was required, so we return success.  Again,
2372         * the semantics of the mid-layer recovery engine are not
2373         * well defined, so this may change in time.
2374         */
2375        retval = SUCCESS;
2376done:
2377        if (paused)
2378                ahd_unpause(ahd);
2379        if (wait) {
2380                DECLARE_COMPLETION_ONSTACK(done);
2381
2382                ahd->platform_data->eh_done = &done;
2383                ahd_unlock(ahd, &flags);
2384
2385                printk("%s: Recovery code sleeping\n", ahd_name(ahd));
2386                if (!wait_for_completion_timeout(&done, 5 * HZ)) {
2387                        ahd_lock(ahd, &flags);
2388                        ahd->platform_data->eh_done = NULL;
2389                        ahd_unlock(ahd, &flags);
2390                        printk("%s: Timer Expired (active %d)\n",
2391                               ahd_name(ahd), dev->active);
2392                        retval = FAILED;
2393                }
2394                printk("Recovery code awake\n");
2395        } else
2396                ahd_unlock(ahd, &flags);
2397
2398        if (retval != SUCCESS)
2399                printk("%s: Command abort returning 0x%x\n",
2400                       ahd_name(ahd), retval);
2401
2402        return retval;
2403}
2404
2405static void ahd_linux_set_width(struct scsi_target *starget, int width)
2406{
2407        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2408        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2409        struct ahd_devinfo devinfo;
2410        unsigned long flags;
2411
2412        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2413                            starget->channel + 'A', ROLE_INITIATOR);
2414        ahd_lock(ahd, &flags);
2415        ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
2416        ahd_unlock(ahd, &flags);
2417}
2418
2419static void ahd_linux_set_period(struct scsi_target *starget, int period)
2420{
2421        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2422        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2423        struct ahd_tmode_tstate *tstate;
2424        struct ahd_initiator_tinfo *tinfo 
2425                = ahd_fetch_transinfo(ahd,
2426                                      starget->channel + 'A',
2427                                      shost->this_id, starget->id, &tstate);
2428        struct ahd_devinfo devinfo;
2429        unsigned int ppr_options = tinfo->goal.ppr_options;
2430        unsigned int dt;
2431        unsigned long flags;
2432        unsigned long offset = tinfo->goal.offset;
2433
2434#ifdef AHD_DEBUG
2435        if ((ahd_debug & AHD_SHOW_DV) != 0)
2436                printk("%s: set period to %d\n", ahd_name(ahd), period);
2437#endif
2438        if (offset == 0)
2439                offset = MAX_OFFSET;
2440
2441        if (period < 8)
2442                period = 8;
2443        if (period < 10) {
2444                if (spi_max_width(starget)) {
2445                        ppr_options |= MSG_EXT_PPR_DT_REQ;
2446                        if (period == 8)
2447                                ppr_options |= MSG_EXT_PPR_IU_REQ;
2448                } else
2449                        period = 10;
2450        }
2451
2452        dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2453
2454        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2455                            starget->channel + 'A', ROLE_INITIATOR);
2456
2457        /* all PPR requests apart from QAS require wide transfers */
2458        if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
2459                if (spi_width(starget) == 0)
2460                        ppr_options &= MSG_EXT_PPR_QAS_REQ;
2461        }
2462
2463        ahd_find_syncrate(ahd, &period, &ppr_options,
2464                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2465
2466        ahd_lock(ahd, &flags);
2467        ahd_set_syncrate(ahd, &devinfo, period, offset,
2468                         ppr_options, AHD_TRANS_GOAL, FALSE);
2469        ahd_unlock(ahd, &flags);
2470}
2471
2472static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
2473{
2474        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2475        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2476        struct ahd_tmode_tstate *tstate;
2477        struct ahd_initiator_tinfo *tinfo 
2478                = ahd_fetch_transinfo(ahd,
2479                                      starget->channel + 'A',
2480                                      shost->this_id, starget->id, &tstate);
2481        struct ahd_devinfo devinfo;
2482        unsigned int ppr_options = 0;
2483        unsigned int period = 0;
2484        unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2485        unsigned long flags;
2486
2487#ifdef AHD_DEBUG
2488        if ((ahd_debug & AHD_SHOW_DV) != 0)
2489                printk("%s: set offset to %d\n", ahd_name(ahd), offset);
2490#endif
2491
2492        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2493                            starget->channel + 'A', ROLE_INITIATOR);
2494        if (offset != 0) {
2495                period = tinfo->goal.period;
2496                ppr_options = tinfo->goal.ppr_options;
2497                ahd_find_syncrate(ahd, &period, &ppr_options, 
2498                                  dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2499        }
2500
2501        ahd_lock(ahd, &flags);
2502        ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
2503                         AHD_TRANS_GOAL, FALSE);
2504        ahd_unlock(ahd, &flags);
2505}
2506
2507static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
2508{
2509        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2510        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2511        struct ahd_tmode_tstate *tstate;
2512        struct ahd_initiator_tinfo *tinfo 
2513                = ahd_fetch_transinfo(ahd,
2514                                      starget->channel + 'A',
2515                                      shost->this_id, starget->id, &tstate);
2516        struct ahd_devinfo devinfo;
2517        unsigned int ppr_options = tinfo->goal.ppr_options
2518                & ~MSG_EXT_PPR_DT_REQ;
2519        unsigned int period = tinfo->goal.period;
2520        unsigned int width = tinfo->goal.width;
2521        unsigned long flags;
2522
2523#ifdef AHD_DEBUG
2524        if ((ahd_debug & AHD_SHOW_DV) != 0)
2525                printk("%s: %s DT\n", ahd_name(ahd),
2526                       dt ? "enabling" : "disabling");
2527#endif
2528        if (dt && spi_max_width(starget)) {
2529                ppr_options |= MSG_EXT_PPR_DT_REQ;
2530                if (!width)
2531                        ahd_linux_set_width(starget, 1);
2532        } else {
2533                if (period <= 9)
2534                        period = 10; /* If resetting DT, period must be >= 25ns */
2535                /* IU is invalid without DT set */
2536                ppr_options &= ~MSG_EXT_PPR_IU_REQ;
2537        }
2538        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2539                            starget->channel + 'A', ROLE_INITIATOR);
2540        ahd_find_syncrate(ahd, &period, &ppr_options,
2541                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2542
2543        ahd_lock(ahd, &flags);
2544        ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2545                         ppr_options, AHD_TRANS_GOAL, FALSE);
2546        ahd_unlock(ahd, &flags);
2547}
2548
2549static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
2550{
2551        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2552        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2553        struct ahd_tmode_tstate *tstate;
2554        struct ahd_initiator_tinfo *tinfo 
2555                = ahd_fetch_transinfo(ahd,
2556                                      starget->channel + 'A',
2557                                      shost->this_id, starget->id, &tstate);
2558        struct ahd_devinfo devinfo;
2559        unsigned int ppr_options = tinfo->goal.ppr_options
2560                & ~MSG_EXT_PPR_QAS_REQ;
2561        unsigned int period = tinfo->goal.period;
2562        unsigned int dt;
2563        unsigned long flags;
2564
2565#ifdef AHD_DEBUG
2566        if ((ahd_debug & AHD_SHOW_DV) != 0)
2567                printk("%s: %s QAS\n", ahd_name(ahd),
2568                       qas ? "enabling" : "disabling");
2569#endif
2570
2571        if (qas) {
2572                ppr_options |= MSG_EXT_PPR_QAS_REQ; 
2573        }
2574
2575        dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2576
2577        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2578                            starget->channel + 'A', ROLE_INITIATOR);
2579        ahd_find_syncrate(ahd, &period, &ppr_options,
2580                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2581
2582        ahd_lock(ahd, &flags);
2583        ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2584                         ppr_options, AHD_TRANS_GOAL, FALSE);
2585        ahd_unlock(ahd, &flags);
2586}
2587
2588static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
2589{
2590        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2591        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2592        struct ahd_tmode_tstate *tstate;
2593        struct ahd_initiator_tinfo *tinfo 
2594                = ahd_fetch_transinfo(ahd,
2595                                      starget->channel + 'A',
2596                                      shost->this_id, starget->id, &tstate);
2597        struct ahd_devinfo devinfo;
2598        unsigned int ppr_options = tinfo->goal.ppr_options
2599                & ~MSG_EXT_PPR_IU_REQ;
2600        unsigned int period = tinfo->goal.period;
2601        unsigned int dt;
2602        unsigned long flags;
2603
2604#ifdef AHD_DEBUG
2605        if ((ahd_debug & AHD_SHOW_DV) != 0)
2606                printk("%s: %s IU\n", ahd_name(ahd),
2607                       iu ? "enabling" : "disabling");
2608#endif
2609
2610        if (iu && spi_max_width(starget)) {
2611                ppr_options |= MSG_EXT_PPR_IU_REQ;
2612                ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
2613        }
2614
2615        dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2616
2617        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2618                            starget->channel + 'A', ROLE_INITIATOR);
2619        ahd_find_syncrate(ahd, &period, &ppr_options,
2620                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2621
2622        ahd_lock(ahd, &flags);
2623        ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2624                         ppr_options, AHD_TRANS_GOAL, FALSE);
2625        ahd_unlock(ahd, &flags);
2626}
2627
2628static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
2629{
2630        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2631        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2632        struct ahd_tmode_tstate *tstate;
2633        struct ahd_initiator_tinfo *tinfo 
2634                = ahd_fetch_transinfo(ahd,
2635                                      starget->channel + 'A',
2636                                      shost->this_id, starget->id, &tstate);
2637        struct ahd_devinfo devinfo;
2638        unsigned int ppr_options = tinfo->goal.ppr_options
2639                & ~MSG_EXT_PPR_RD_STRM;
2640        unsigned int period = tinfo->goal.period;
2641        unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2642        unsigned long flags;
2643
2644#ifdef AHD_DEBUG
2645        if ((ahd_debug & AHD_SHOW_DV) != 0)
2646                printk("%s: %s Read Streaming\n", ahd_name(ahd),
2647                       rdstrm  ? "enabling" : "disabling");
2648#endif
2649
2650        if (rdstrm && spi_max_width(starget))
2651                ppr_options |= MSG_EXT_PPR_RD_STRM;
2652
2653        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2654                            starget->channel + 'A', ROLE_INITIATOR);
2655        ahd_find_syncrate(ahd, &period, &ppr_options,
2656                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2657
2658        ahd_lock(ahd, &flags);
2659        ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2660                         ppr_options, AHD_TRANS_GOAL, FALSE);
2661        ahd_unlock(ahd, &flags);
2662}
2663
2664static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
2665{
2666        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2667        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2668        struct ahd_tmode_tstate *tstate;
2669        struct ahd_initiator_tinfo *tinfo 
2670                = ahd_fetch_transinfo(ahd,
2671                                      starget->channel + 'A',
2672                                      shost->this_id, starget->id, &tstate);
2673        struct ahd_devinfo devinfo;
2674        unsigned int ppr_options = tinfo->goal.ppr_options
2675                & ~MSG_EXT_PPR_WR_FLOW;
2676        unsigned int period = tinfo->goal.period;
2677        unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2678        unsigned long flags;
2679
2680#ifdef AHD_DEBUG
2681        if ((ahd_debug & AHD_SHOW_DV) != 0)
2682                printk("%s: %s Write Flow Control\n", ahd_name(ahd),
2683                       wrflow ? "enabling" : "disabling");
2684#endif
2685
2686        if (wrflow && spi_max_width(starget))
2687                ppr_options |= MSG_EXT_PPR_WR_FLOW;
2688
2689        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2690                            starget->channel + 'A', ROLE_INITIATOR);
2691        ahd_find_syncrate(ahd, &period, &ppr_options,
2692                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2693
2694        ahd_lock(ahd, &flags);
2695        ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2696                         ppr_options, AHD_TRANS_GOAL, FALSE);
2697        ahd_unlock(ahd, &flags);
2698}
2699
2700static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
2701{
2702        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2703        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2704        struct ahd_tmode_tstate *tstate;
2705        struct ahd_initiator_tinfo *tinfo 
2706                = ahd_fetch_transinfo(ahd,
2707                                      starget->channel + 'A',
2708                                      shost->this_id, starget->id, &tstate);
2709        struct ahd_devinfo devinfo;
2710        unsigned int ppr_options = tinfo->goal.ppr_options
2711                & ~MSG_EXT_PPR_RTI;
2712        unsigned int period = tinfo->goal.period;
2713        unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2714        unsigned long flags;
2715
2716        if ((ahd->features & AHD_RTI) == 0) {
2717#ifdef AHD_DEBUG
2718                if ((ahd_debug & AHD_SHOW_DV) != 0)
2719                        printk("%s: RTI not available\n", ahd_name(ahd));
2720#endif
2721                return;
2722        }
2723
2724#ifdef AHD_DEBUG
2725        if ((ahd_debug & AHD_SHOW_DV) != 0)
2726                printk("%s: %s RTI\n", ahd_name(ahd),
2727                       rti ? "enabling" : "disabling");
2728#endif
2729
2730        if (rti && spi_max_width(starget))
2731                ppr_options |= MSG_EXT_PPR_RTI;
2732
2733        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2734                            starget->channel + 'A', ROLE_INITIATOR);
2735        ahd_find_syncrate(ahd, &period, &ppr_options,
2736                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2737
2738        ahd_lock(ahd, &flags);
2739        ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2740                         ppr_options, AHD_TRANS_GOAL, FALSE);
2741        ahd_unlock(ahd, &flags);
2742}
2743
2744static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
2745{
2746        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2747        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2748        struct ahd_tmode_tstate *tstate;
2749        struct ahd_initiator_tinfo *tinfo 
2750                = ahd_fetch_transinfo(ahd,
2751                                      starget->channel + 'A',
2752                                      shost->this_id, starget->id, &tstate);
2753        struct ahd_devinfo devinfo;
2754        unsigned int ppr_options = tinfo->goal.ppr_options
2755                & ~MSG_EXT_PPR_PCOMP_EN;
2756        unsigned int period = tinfo->goal.period;
2757        unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2758        unsigned long flags;
2759
2760#ifdef AHD_DEBUG
2761        if ((ahd_debug & AHD_SHOW_DV) != 0)
2762                printk("%s: %s Precompensation\n", ahd_name(ahd),
2763                       pcomp ? "Enable" : "Disable");
2764#endif
2765
2766        if (pcomp && spi_max_width(starget)) {
2767                uint8_t precomp;
2768
2769                if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) {
2770                        const struct ahd_linux_iocell_opts *iocell_opts;
2771
2772                        iocell_opts = &aic79xx_iocell_info[ahd->unit];
2773                        precomp = iocell_opts->precomp;
2774                } else {
2775                        precomp = AIC79XX_DEFAULT_PRECOMP;
2776                }
2777                ppr_options |= MSG_EXT_PPR_PCOMP_EN;
2778                AHD_SET_PRECOMP(ahd, precomp);
2779        } else {
2780                AHD_SET_PRECOMP(ahd, 0);
2781        }
2782
2783        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2784                            starget->channel + 'A', ROLE_INITIATOR);
2785        ahd_find_syncrate(ahd, &period, &ppr_options,
2786                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2787
2788        ahd_lock(ahd, &flags);
2789        ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2790                         ppr_options, AHD_TRANS_GOAL, FALSE);
2791        ahd_unlock(ahd, &flags);
2792}
2793
2794static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
2795{
2796        struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2797        struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2798        struct ahd_tmode_tstate *tstate;
2799        struct ahd_initiator_tinfo *tinfo 
2800                = ahd_fetch_transinfo(ahd,
2801                                      starget->channel + 'A',
2802                                      shost->this_id, starget->id, &tstate);
2803        struct ahd_devinfo devinfo;
2804        unsigned int ppr_options = tinfo->goal.ppr_options
2805                & ~MSG_EXT_PPR_HOLD_MCS;
2806        unsigned int period = tinfo->goal.period;
2807        unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2808        unsigned long flags;
2809
2810        if (hold && spi_max_width(starget))
2811                ppr_options |= MSG_EXT_PPR_HOLD_MCS;
2812
2813        ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2814                            starget->channel + 'A', ROLE_INITIATOR);
2815        ahd_find_syncrate(ahd, &period, &ppr_options,
2816                          dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2817
2818        ahd_lock(ahd, &flags);
2819        ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2820                         ppr_options, AHD_TRANS_GOAL, FALSE);
2821        ahd_unlock(ahd, &flags);
2822}
2823
2824static void ahd_linux_get_signalling(struct Scsi_Host *shost)
2825{
2826        struct ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata;
2827        unsigned long flags;
2828        u8 mode;
2829
2830        ahd_lock(ahd, &flags);
2831        ahd_pause(ahd);
2832        mode = ahd_inb(ahd, SBLKCTL);
2833        ahd_unpause(ahd);
2834        ahd_unlock(ahd, &flags);
2835
2836        if (mode & ENAB40)
2837                spi_signalling(shost) = SPI_SIGNAL_LVD;
2838        else if (mode & ENAB20)
2839                spi_signalling(shost) = SPI_SIGNAL_SE;
2840        else
2841                spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
2842}
2843
2844static struct spi_function_template ahd_linux_transport_functions = {
2845        .set_offset     = ahd_linux_set_offset,
2846        .show_offset    = 1,
2847        .set_period     = ahd_linux_set_period,
2848        .show_period    = 1,
2849        .set_width      = ahd_linux_set_width,
2850        .show_width     = 1,
2851        .set_dt         = ahd_linux_set_dt,
2852        .show_dt        = 1,
2853        .set_iu         = ahd_linux_set_iu,
2854        .show_iu        = 1,
2855        .set_qas        = ahd_linux_set_qas,
2856        .show_qas       = 1,
2857        .set_rd_strm    = ahd_linux_set_rd_strm,
2858        .show_rd_strm   = 1,
2859        .set_wr_flow    = ahd_linux_set_wr_flow,
2860        .show_wr_flow   = 1,
2861        .set_rti        = ahd_linux_set_rti,
2862        .show_rti       = 1,
2863        .set_pcomp_en   = ahd_linux_set_pcomp_en,
2864        .show_pcomp_en  = 1,
2865        .set_hold_mcs   = ahd_linux_set_hold_mcs,
2866        .show_hold_mcs  = 1,
2867        .get_signalling = ahd_linux_get_signalling,
2868};
2869
2870static int __init
2871ahd_linux_init(void)
2872{
2873        int     error = 0;
2874
2875        /*
2876         * If we've been passed any parameters, process them now.
2877         */
2878        if (aic79xx)
2879                aic79xx_setup(aic79xx);
2880
2881        ahd_linux_transport_template =
2882                spi_attach_transport(&ahd_linux_transport_functions);
2883        if (!ahd_linux_transport_template)
2884                return -ENODEV;
2885
2886        scsi_transport_reserve_device(ahd_linux_transport_template,
2887                                      sizeof(struct ahd_linux_device));
2888
2889        error = ahd_linux_pci_init();
2890        if (error)
2891                spi_release_transport(ahd_linux_transport_template);
2892        return error;
2893}
2894
2895static void __exit
2896ahd_linux_exit(void)
2897{
2898        ahd_linux_pci_exit();
2899        spi_release_transport(ahd_linux_transport_template);
2900}
2901
2902module_init(ahd_linux_init);
2903module_exit(ahd_linux_exit);
2904