linux/drivers/scsi/aic7xxx/aic79xx_proc.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2000-2001 Adaptec Inc.
   3 * All rights reserved.
   4 *
   5 * Redistribution and use in source and binary forms, with or without
   6 * modification, are permitted provided that the following conditions
   7 * are met:
   8 * 1. Redistributions of source code must retain the above copyright
   9 *    notice, this list of conditions, and the following disclaimer,
  10 *    without modification.
  11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  12 *    substantially similar to the "NO WARRANTY" disclaimer below
  13 *    ("Disclaimer") and any redistribution must be conditioned upon
  14 *    including a substantially similar Disclaimer requirement for further
  15 *    binary redistribution.
  16 * 3. Neither the names of the above-listed copyright holders nor the names
  17 *    of any contributors may be used to endorse or promote products derived
  18 *    from this software without specific prior written permission.
  19 *
  20 * Alternatively, this software may be distributed under the terms of the
  21 * GNU General Public License ("GPL") version 2 as published by the Free
  22 * Software Foundation.
  23 *
  24 * NO WARRANTY
  25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  26 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  27 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  28 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  29 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  33 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  34 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  35 * POSSIBILITY OF SUCH DAMAGES.
  36 *
  37 * String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr>
  38 * sym driver.
  39 *
  40 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_proc.c#19 $
  41 */
  42#include "aic79xx_osm.h"
  43#include "aic79xx_inline.h"
  44
  45static void     copy_mem_info(struct info_str *info, char *data, int len);
  46static int      copy_info(struct info_str *info, char *fmt, ...);
  47static void     ahd_dump_target_state(struct ahd_softc *ahd,
  48                                      struct info_str *info,
  49                                      u_int our_id, char channel,
  50                                      u_int target_id);
  51static void     ahd_dump_device_state(struct info_str *info,
  52                                      struct scsi_device *sdev);
  53static int      ahd_proc_write_seeprom(struct ahd_softc *ahd,
  54                                       char *buffer, int length);
  55
  56/*
  57 * Table of syncrates that don't follow the "divisible by 4"
  58 * rule. This table will be expanded in future SCSI specs.
  59 */
  60static const struct {
  61        u_int period_factor;
  62        u_int period;   /* in 100ths of ns */
  63} scsi_syncrates[] = {
  64        { 0x08, 625 },  /* FAST-160 */
  65        { 0x09, 1250 }, /* FAST-80 */
  66        { 0x0a, 2500 }, /* FAST-40 40MHz */
  67        { 0x0b, 3030 }, /* FAST-40 33MHz */
  68        { 0x0c, 5000 }  /* FAST-20 */
  69};
  70
  71/*
  72 * Return the frequency in kHz corresponding to the given
  73 * sync period factor.
  74 */
  75static u_int
  76ahd_calc_syncsrate(u_int period_factor)
  77{
  78        int i;
  79
  80        /* See if the period is in the "exception" table */
  81        for (i = 0; i < ARRAY_SIZE(scsi_syncrates); i++) {
  82
  83                if (period_factor == scsi_syncrates[i].period_factor) {
  84                        /* Period in kHz */
  85                        return (100000000 / scsi_syncrates[i].period);
  86                }
  87        }
  88
  89        /*
  90         * Wasn't in the table, so use the standard
  91         * 4 times conversion.
  92         */
  93        return (10000000 / (period_factor * 4 * 10));
  94}
  95
  96
  97static void
  98copy_mem_info(struct info_str *info, char *data, int len)
  99{
 100        if (info->pos + len > info->offset + info->length)
 101                len = info->offset + info->length - info->pos;
 102
 103        if (info->pos + len < info->offset) {
 104                info->pos += len;
 105                return;
 106        }
 107
 108        if (info->pos < info->offset) {
 109                off_t partial;
 110
 111                partial = info->offset - info->pos;
 112                data += partial;
 113                info->pos += partial;
 114                len  -= partial;
 115        }
 116
 117        if (len > 0) {
 118                memcpy(info->buffer, data, len);
 119                info->pos += len;
 120                info->buffer += len;
 121        }
 122}
 123
 124static int
 125copy_info(struct info_str *info, char *fmt, ...)
 126{
 127        va_list args;
 128        char buf[256];
 129        int len;
 130
 131        va_start(args, fmt);
 132        len = vsprintf(buf, fmt, args);
 133        va_end(args);
 134
 135        copy_mem_info(info, buf, len);
 136        return (len);
 137}
 138
 139static void
 140ahd_format_transinfo(struct info_str *info, struct ahd_transinfo *tinfo)
 141{
 142        u_int speed;
 143        u_int freq;
 144        u_int mb;
 145
 146        if (tinfo->period == AHD_PERIOD_UNKNOWN) {
 147                copy_info(info, "Renegotiation Pending\n");
 148                return;
 149        }
 150        speed = 3300;
 151        freq = 0;
 152        if (tinfo->offset != 0) {
 153                freq = ahd_calc_syncsrate(tinfo->period);
 154                speed = freq;
 155        }
 156        speed *= (0x01 << tinfo->width);
 157        mb = speed / 1000;
 158        if (mb > 0)
 159                copy_info(info, "%d.%03dMB/s transfers", mb, speed % 1000);
 160        else
 161                copy_info(info, "%dKB/s transfers", speed);
 162
 163        if (freq != 0) {
 164                int     printed_options;
 165
 166                printed_options = 0;
 167                copy_info(info, " (%d.%03dMHz", freq / 1000, freq % 1000);
 168                if ((tinfo->ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
 169                        copy_info(info, " RDSTRM");
 170                        printed_options++;
 171                }
 172                if ((tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
 173                        copy_info(info, "%s", printed_options ? "|DT" : " DT");
 174                        printed_options++;
 175                }
 176                if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
 177                        copy_info(info, "%s", printed_options ? "|IU" : " IU");
 178                        printed_options++;
 179                }
 180                if ((tinfo->ppr_options & MSG_EXT_PPR_RTI) != 0) {
 181                        copy_info(info, "%s",
 182                                  printed_options ? "|RTI" : " RTI");
 183                        printed_options++;
 184                }
 185                if ((tinfo->ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
 186                        copy_info(info, "%s",
 187                                  printed_options ? "|QAS" : " QAS");
 188                        printed_options++;
 189                }
 190        }
 191
 192        if (tinfo->width > 0) {
 193                if (freq != 0) {
 194                        copy_info(info, ", ");
 195                } else {
 196                        copy_info(info, " (");
 197                }
 198                copy_info(info, "%dbit)", 8 * (0x01 << tinfo->width));
 199        } else if (freq != 0) {
 200                copy_info(info, ")");
 201        }
 202        copy_info(info, "\n");
 203}
 204
 205static void
 206ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info,
 207                      u_int our_id, char channel, u_int target_id)
 208{
 209        struct  scsi_target *starget;
 210        struct  ahd_initiator_tinfo *tinfo;
 211        struct  ahd_tmode_tstate *tstate;
 212        int     lun;
 213
 214        tinfo = ahd_fetch_transinfo(ahd, channel, our_id,
 215                                    target_id, &tstate);
 216        copy_info(info, "Target %d Negotiation Settings\n", target_id);
 217        copy_info(info, "\tUser: ");
 218        ahd_format_transinfo(info, &tinfo->user);
 219        starget = ahd->platform_data->starget[target_id];
 220        if (starget == NULL)
 221                return;
 222
 223        copy_info(info, "\tGoal: ");
 224        ahd_format_transinfo(info, &tinfo->goal);
 225        copy_info(info, "\tCurr: ");
 226        ahd_format_transinfo(info, &tinfo->curr);
 227
 228        for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
 229                struct scsi_device *dev;
 230
 231                dev = scsi_device_lookup_by_target(starget, lun);
 232
 233                if (dev == NULL)
 234                        continue;
 235
 236                ahd_dump_device_state(info, dev);
 237        }
 238}
 239
 240static void
 241ahd_dump_device_state(struct info_str *info, struct scsi_device *sdev)
 242{
 243        struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
 244
 245        copy_info(info, "\tChannel %c Target %d Lun %d Settings\n",
 246                  sdev->sdev_target->channel + 'A',
 247                  sdev->sdev_target->id, sdev->lun);
 248
 249        copy_info(info, "\t\tCommands Queued %ld\n", dev->commands_issued);
 250        copy_info(info, "\t\tCommands Active %d\n", dev->active);
 251        copy_info(info, "\t\tCommand Openings %d\n", dev->openings);
 252        copy_info(info, "\t\tMax Tagged Openings %d\n", dev->maxtags);
 253        copy_info(info, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen);
 254}
 255
 256static int
 257ahd_proc_write_seeprom(struct ahd_softc *ahd, char *buffer, int length)
 258{
 259        ahd_mode_state saved_modes;
 260        int have_seeprom;
 261        u_long s;
 262        int paused;
 263        int written;
 264
 265        /* Default to failure. */
 266        written = -EINVAL;
 267        ahd_lock(ahd, &s);
 268        paused = ahd_is_paused(ahd);
 269        if (!paused)
 270                ahd_pause(ahd);
 271
 272        saved_modes = ahd_save_modes(ahd);
 273        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
 274        if (length != sizeof(struct seeprom_config)) {
 275                printk("ahd_proc_write_seeprom: incorrect buffer size\n");
 276                goto done;
 277        }
 278
 279        have_seeprom = ahd_verify_cksum((struct seeprom_config*)buffer);
 280        if (have_seeprom == 0) {
 281                printk("ahd_proc_write_seeprom: cksum verification failed\n");
 282                goto done;
 283        }
 284
 285        have_seeprom = ahd_acquire_seeprom(ahd);
 286        if (!have_seeprom) {
 287                printk("ahd_proc_write_seeprom: No Serial EEPROM\n");
 288                goto done;
 289        } else {
 290                u_int start_addr;
 291
 292                if (ahd->seep_config == NULL) {
 293                        ahd->seep_config = kmalloc(sizeof(*ahd->seep_config), GFP_ATOMIC);
 294                        if (ahd->seep_config == NULL) {
 295                                printk("aic79xx: Unable to allocate serial "
 296                                       "eeprom buffer.  Write failing\n");
 297                                goto done;
 298                        }
 299                }
 300                printk("aic79xx: Writing Serial EEPROM\n");
 301                start_addr = 32 * (ahd->channel - 'A');
 302                ahd_write_seeprom(ahd, (u_int16_t *)buffer, start_addr,
 303                                  sizeof(struct seeprom_config)/2);
 304                ahd_read_seeprom(ahd, (uint16_t *)ahd->seep_config,
 305                                 start_addr, sizeof(struct seeprom_config)/2,
 306                                 /*ByteStream*/FALSE);
 307                ahd_release_seeprom(ahd);
 308                written = length;
 309        }
 310
 311done:
 312        ahd_restore_modes(ahd, saved_modes);
 313        if (!paused)
 314                ahd_unpause(ahd);
 315        ahd_unlock(ahd, &s);
 316        return (written);
 317}
 318/*
 319 * Return information to handle /proc support for the driver.
 320 */
 321int
 322ahd_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
 323                    off_t offset, int length, int inout)
 324{
 325        struct  ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata;
 326        struct  info_str info;
 327        char    ahd_info[256];
 328        u_int   max_targ;
 329        u_int   i;
 330        int     retval;
 331
 332         /* Has data been written to the file? */ 
 333        if (inout == TRUE) {
 334                retval = ahd_proc_write_seeprom(ahd, buffer, length);
 335                goto done;
 336        }
 337
 338        if (start)
 339                *start = buffer;
 340
 341        info.buffer     = buffer;
 342        info.length     = length;
 343        info.offset     = offset;
 344        info.pos        = 0;
 345
 346        copy_info(&info, "Adaptec AIC79xx driver version: %s\n",
 347                  AIC79XX_DRIVER_VERSION);
 348        copy_info(&info, "%s\n", ahd->description);
 349        ahd_controller_info(ahd, ahd_info);
 350        copy_info(&info, "%s\n", ahd_info);
 351        copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n",
 352                  ahd->scb_data.numscbs, AHD_NSEG);
 353
 354        max_targ = 16;
 355
 356        if (ahd->seep_config == NULL)
 357                copy_info(&info, "No Serial EEPROM\n");
 358        else {
 359                copy_info(&info, "Serial EEPROM:\n");
 360                for (i = 0; i < sizeof(*ahd->seep_config)/2; i++) {
 361                        if (((i % 8) == 0) && (i != 0)) {
 362                                copy_info(&info, "\n");
 363                        }
 364                        copy_info(&info, "0x%.4x ",
 365                                  ((uint16_t*)ahd->seep_config)[i]);
 366                }
 367                copy_info(&info, "\n");
 368        }
 369        copy_info(&info, "\n");
 370
 371        if ((ahd->features & AHD_WIDE) == 0)
 372                max_targ = 8;
 373
 374        for (i = 0; i < max_targ; i++) {
 375
 376                ahd_dump_target_state(ahd, &info, ahd->our_id, 'A',
 377                                      /*target_id*/i);
 378        }
 379        retval = info.pos > info.offset ? info.pos - info.offset : 0;
 380done:
 381        return (retval);
 382}
 383