linux/drivers/scsi/pm8001/pm8001_sas.c
<<
>>
Prefs
   1/*
   2 * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
   3 *
   4 * Copyright (c) 2008-2009 USI Co., Ltd.
   5 * All rights reserved.
   6 *
   7 * Redistribution and use in source and binary forms, with or without
   8 * modification, are permitted provided that the following conditions
   9 * are met:
  10 * 1. Redistributions of source code must retain the above copyright
  11 *    notice, this list of conditions, and the following disclaimer,
  12 *    without modification.
  13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  14 *    substantially similar to the "NO WARRANTY" disclaimer below
  15 *    ("Disclaimer") and any redistribution must be conditioned upon
  16 *    including a substantially similar Disclaimer requirement for further
  17 *    binary redistribution.
  18 * 3. Neither the names of the above-listed copyright holders nor the names
  19 *    of any contributors may be used to endorse or promote products derived
  20 *    from this software without specific prior written permission.
  21 *
  22 * Alternatively, this software may be distributed under the terms of the
  23 * GNU General Public License ("GPL") version 2 as published by the Free
  24 * Software Foundation.
  25 *
  26 * NO WARRANTY
  27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  31 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  35 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  36 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  37 * POSSIBILITY OF SUCH DAMAGES.
  38 *
  39 */
  40
  41#include <linux/slab.h>
  42#include "pm8001_sas.h"
  43
  44/**
  45 * pm8001_find_tag - from sas task to find out  tag that belongs to this task
  46 * @task: the task sent to the LLDD
  47 * @tag: the found tag associated with the task
  48 */
  49static int pm8001_find_tag(struct sas_task *task, u32 *tag)
  50{
  51        if (task->lldd_task) {
  52                struct pm8001_ccb_info *ccb;
  53                ccb = task->lldd_task;
  54                *tag = ccb->ccb_tag;
  55                return 1;
  56        }
  57        return 0;
  58}
  59
  60/**
  61  * pm8001_tag_clear - clear the tags bitmap
  62  * @pm8001_ha: our hba struct
  63  * @tag: the found tag associated with the task
  64  */
  65static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag)
  66{
  67        void *bitmap = pm8001_ha->tags;
  68        clear_bit(tag, bitmap);
  69}
  70
  71static void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
  72{
  73        pm8001_tag_clear(pm8001_ha, tag);
  74}
  75
  76static void pm8001_tag_set(struct pm8001_hba_info *pm8001_ha, u32 tag)
  77{
  78        void *bitmap = pm8001_ha->tags;
  79        set_bit(tag, bitmap);
  80}
  81
  82/**
  83  * pm8001_tag_alloc - allocate a empty tag for task used.
  84  * @pm8001_ha: our hba struct
  85  * @tag_out: the found empty tag .
  86  */
  87inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
  88{
  89        unsigned int index, tag;
  90        void *bitmap = pm8001_ha->tags;
  91
  92        index = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
  93        tag = index;
  94        if (tag >= pm8001_ha->tags_num)
  95                return -SAS_QUEUE_FULL;
  96        pm8001_tag_set(pm8001_ha, tag);
  97        *tag_out = tag;
  98        return 0;
  99}
 100
 101void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
 102{
 103        int i;
 104        for (i = 0; i < pm8001_ha->tags_num; ++i)
 105                pm8001_tag_clear(pm8001_ha, i);
 106}
 107
 108 /**
 109  * pm8001_mem_alloc - allocate memory for pm8001.
 110  * @pdev: pci device.
 111  * @virt_addr: the allocated virtual address
 112  * @pphys_addr_hi: the physical address high byte address.
 113  * @pphys_addr_lo: the physical address low byte address.
 114  * @mem_size: memory size.
 115  */
 116int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
 117        dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
 118        u32 *pphys_addr_lo, u32 mem_size, u32 align)
 119{
 120        caddr_t mem_virt_alloc;
 121        dma_addr_t mem_dma_handle;
 122        u64 phys_align;
 123        u64 align_offset = 0;
 124        if (align)
 125                align_offset = (dma_addr_t)align - 1;
 126        mem_virt_alloc =
 127                pci_alloc_consistent(pdev, mem_size + align, &mem_dma_handle);
 128        if (!mem_virt_alloc) {
 129                pm8001_printk("memory allocation error\n");
 130                return -1;
 131        }
 132        memset((void *)mem_virt_alloc, 0, mem_size+align);
 133        *pphys_addr = mem_dma_handle;
 134        phys_align = (*pphys_addr + align_offset) & ~align_offset;
 135        *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
 136        *pphys_addr_hi = upper_32_bits(phys_align);
 137        *pphys_addr_lo = lower_32_bits(phys_align);
 138        return 0;
 139}
 140/**
 141  * pm8001_find_ha_by_dev - from domain device which come from sas layer to
 142  * find out our hba struct.
 143  * @dev: the domain device which from sas layer.
 144  */
 145static
 146struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
 147{
 148        struct sas_ha_struct *sha = dev->port->ha;
 149        struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
 150        return pm8001_ha;
 151}
 152
 153/**
 154  * pm8001_phy_control - this function should be registered to
 155  * sas_domain_function_template to provide libsas used, note: this is just
 156  * control the HBA phy rather than other expander phy if you want control
 157  * other phy, you should use SMP command.
 158  * @sas_phy: which phy in HBA phys.
 159  * @func: the operation.
 160  * @funcdata: always NULL.
 161  */
 162int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
 163        void *funcdata)
 164{
 165        int rc = 0, phy_id = sas_phy->id;
 166        struct pm8001_hba_info *pm8001_ha = NULL;
 167        struct sas_phy_linkrates *rates;
 168        DECLARE_COMPLETION_ONSTACK(completion);
 169        pm8001_ha = sas_phy->ha->lldd_ha;
 170        pm8001_ha->phy[phy_id].enable_completion = &completion;
 171        switch (func) {
 172        case PHY_FUNC_SET_LINK_RATE:
 173                rates = funcdata;
 174                if (rates->minimum_linkrate) {
 175                        pm8001_ha->phy[phy_id].minimum_linkrate =
 176                                rates->minimum_linkrate;
 177                }
 178                if (rates->maximum_linkrate) {
 179                        pm8001_ha->phy[phy_id].maximum_linkrate =
 180                                rates->maximum_linkrate;
 181                }
 182                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 183                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 184                        wait_for_completion(&completion);
 185                }
 186                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 187                                              PHY_LINK_RESET);
 188                break;
 189        case PHY_FUNC_HARD_RESET:
 190                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 191                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 192                        wait_for_completion(&completion);
 193                }
 194                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 195                                              PHY_HARD_RESET);
 196                break;
 197        case PHY_FUNC_LINK_RESET:
 198                if (pm8001_ha->phy[phy_id].phy_state == 0) {
 199                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
 200                        wait_for_completion(&completion);
 201                }
 202                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 203                                              PHY_LINK_RESET);
 204                break;
 205        case PHY_FUNC_RELEASE_SPINUP_HOLD:
 206                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
 207                                              PHY_LINK_RESET);
 208                break;
 209        case PHY_FUNC_DISABLE:
 210                PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
 211                break;
 212        default:
 213                rc = -EOPNOTSUPP;
 214        }
 215        msleep(300);
 216        return rc;
 217}
 218
 219int pm8001_slave_alloc(struct scsi_device *scsi_dev)
 220{
 221        struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
 222        if (dev_is_sata(dev)) {
 223                /* We don't need to rescan targets
 224                * if REPORT_LUNS request is failed
 225                */
 226                if (scsi_dev->lun > 0)
 227                        return -ENXIO;
 228                scsi_dev->tagged_supported = 1;
 229        }
 230        return sas_slave_alloc(scsi_dev);
 231}
 232
 233/**
 234  * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
 235  * command to HBA.
 236  * @shost: the scsi host data.
 237  */
 238void pm8001_scan_start(struct Scsi_Host *shost)
 239{
 240        int i;
 241        struct pm8001_hba_info *pm8001_ha;
 242        struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 243        pm8001_ha = sha->lldd_ha;
 244        PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
 245        for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
 246                PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
 247}
 248
 249int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
 250{
 251        /* give the phy enabling interrupt event time to come in (1s
 252        * is empirically about all it takes) */
 253        if (time < HZ)
 254                return 0;
 255        /* Wait for discovery to finish */
 256        scsi_flush_work(shost);
 257        return 1;
 258}
 259
 260/**
 261  * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
 262  * @pm8001_ha: our hba card information
 263  * @ccb: the ccb which attached to smp task
 264  */
 265static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
 266        struct pm8001_ccb_info *ccb)
 267{
 268        return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
 269}
 270
 271u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
 272{
 273        struct ata_queued_cmd *qc = task->uldd_task;
 274        if (qc) {
 275                if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
 276                        qc->tf.command == ATA_CMD_FPDMA_READ) {
 277                        *tag = qc->tag;
 278                        return 1;
 279                }
 280        }
 281        return 0;
 282}
 283
 284/**
 285  * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
 286  * @pm8001_ha: our hba card information
 287  * @ccb: the ccb which attached to sata task
 288  */
 289static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
 290        struct pm8001_ccb_info *ccb)
 291{
 292        return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
 293}
 294
 295/**
 296  * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
 297  * @pm8001_ha: our hba card information
 298  * @ccb: the ccb which attached to TM
 299  * @tmf: the task management IU
 300  */
 301static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
 302        struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
 303{
 304        return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
 305}
 306
 307/**
 308  * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
 309  * @pm8001_ha: our hba card information
 310  * @ccb: the ccb which attached to ssp task
 311  */
 312static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
 313        struct pm8001_ccb_info *ccb)
 314{
 315        return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
 316}
 317int pm8001_slave_configure(struct scsi_device *sdev)
 318{
 319        struct domain_device *dev = sdev_to_domain_dev(sdev);
 320        int ret = sas_slave_configure(sdev);
 321        if (ret)
 322                return ret;
 323        if (dev_is_sata(dev)) {
 324        #ifdef PM8001_DISABLE_NCQ
 325                struct ata_port *ap = dev->sata_dev.ap;
 326                struct ata_device *adev = ap->link.device;
 327                adev->flags |= ATA_DFLAG_NCQ_OFF;
 328                scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
 329        #endif
 330        }
 331        return 0;
 332}
 333 /* Find the local port id that's attached to this device */
 334static int sas_find_local_port_id(struct domain_device *dev)
 335{
 336        struct domain_device *pdev = dev->parent;
 337
 338        /* Directly attached device */
 339        if (!pdev)
 340                return dev->port->id;
 341        while (pdev) {
 342                struct domain_device *pdev_p = pdev->parent;
 343                if (!pdev_p)
 344                        return pdev->port->id;
 345                pdev = pdev->parent;
 346        }
 347        return 0;
 348}
 349
 350/**
 351  * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
 352  * @task: the task to be execute.
 353  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
 354  * we always execute one one time.
 355  * @gfp_flags: gfp_flags.
 356  * @is_tmf: if it is task management task.
 357  * @tmf: the task management IU
 358  */
 359#define DEV_IS_GONE(pm8001_dev) \
 360        ((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
 361static int pm8001_task_exec(struct sas_task *task, const int num,
 362        gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
 363{
 364        struct domain_device *dev = task->dev;
 365        struct pm8001_hba_info *pm8001_ha;
 366        struct pm8001_device *pm8001_dev;
 367        struct pm8001_port *port = NULL;
 368        struct sas_task *t = task;
 369        struct pm8001_ccb_info *ccb;
 370        u32 tag = 0xdeadbeef, rc, n_elem = 0;
 371        u32 n = num;
 372        unsigned long flags = 0, flags_libsas = 0;
 373
 374        if (!dev->port) {
 375                struct task_status_struct *tsm = &t->task_status;
 376                tsm->resp = SAS_TASK_UNDELIVERED;
 377                tsm->stat = SAS_PHY_DOWN;
 378                if (dev->dev_type != SATA_DEV)
 379                        t->task_done(t);
 380                return 0;
 381        }
 382        pm8001_ha = pm8001_find_ha_by_dev(task->dev);
 383        PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
 384        spin_lock_irqsave(&pm8001_ha->lock, flags);
 385        do {
 386                dev = t->dev;
 387                pm8001_dev = dev->lldd_dev;
 388                if (DEV_IS_GONE(pm8001_dev)) {
 389                        if (pm8001_dev) {
 390                                PM8001_IO_DBG(pm8001_ha,
 391                                        pm8001_printk("device %d not ready.\n",
 392                                        pm8001_dev->device_id));
 393                        } else {
 394                                PM8001_IO_DBG(pm8001_ha,
 395                                        pm8001_printk("device %016llx not "
 396                                        "ready.\n", SAS_ADDR(dev->sas_addr)));
 397                        }
 398                        rc = SAS_PHY_DOWN;
 399                        goto out_done;
 400                }
 401                port = &pm8001_ha->port[sas_find_local_port_id(dev)];
 402                if (!port->port_attached) {
 403                        if (sas_protocol_ata(t->task_proto)) {
 404                                struct task_status_struct *ts = &t->task_status;
 405                                ts->resp = SAS_TASK_UNDELIVERED;
 406                                ts->stat = SAS_PHY_DOWN;
 407
 408                                spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 409                                spin_unlock_irqrestore(dev->sata_dev.ap->lock,
 410                                                flags_libsas);
 411                                t->task_done(t);
 412                                spin_lock_irqsave(dev->sata_dev.ap->lock,
 413                                        flags_libsas);
 414                                spin_lock_irqsave(&pm8001_ha->lock, flags);
 415                                if (n > 1)
 416                                        t = list_entry(t->list.next,
 417                                                        struct sas_task, list);
 418                                continue;
 419                        } else {
 420                                struct task_status_struct *ts = &t->task_status;
 421                                ts->resp = SAS_TASK_UNDELIVERED;
 422                                ts->stat = SAS_PHY_DOWN;
 423                                t->task_done(t);
 424                                if (n > 1)
 425                                        t = list_entry(t->list.next,
 426                                                        struct sas_task, list);
 427                                continue;
 428                        }
 429                }
 430                rc = pm8001_tag_alloc(pm8001_ha, &tag);
 431                if (rc)
 432                        goto err_out;
 433                ccb = &pm8001_ha->ccb_info[tag];
 434
 435                if (!sas_protocol_ata(t->task_proto)) {
 436                        if (t->num_scatter) {
 437                                n_elem = dma_map_sg(pm8001_ha->dev,
 438                                        t->scatter,
 439                                        t->num_scatter,
 440                                        t->data_dir);
 441                                if (!n_elem) {
 442                                        rc = -ENOMEM;
 443                                        goto err_out_tag;
 444                                }
 445                        }
 446                } else {
 447                        n_elem = t->num_scatter;
 448                }
 449
 450                t->lldd_task = ccb;
 451                ccb->n_elem = n_elem;
 452                ccb->ccb_tag = tag;
 453                ccb->task = t;
 454                switch (t->task_proto) {
 455                case SAS_PROTOCOL_SMP:
 456                        rc = pm8001_task_prep_smp(pm8001_ha, ccb);
 457                        break;
 458                case SAS_PROTOCOL_SSP:
 459                        if (is_tmf)
 460                                rc = pm8001_task_prep_ssp_tm(pm8001_ha,
 461                                        ccb, tmf);
 462                        else
 463                                rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
 464                        break;
 465                case SAS_PROTOCOL_SATA:
 466                case SAS_PROTOCOL_STP:
 467                case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
 468                        rc = pm8001_task_prep_ata(pm8001_ha, ccb);
 469                        break;
 470                default:
 471                        dev_printk(KERN_ERR, pm8001_ha->dev,
 472                                "unknown sas_task proto: 0x%x\n",
 473                                t->task_proto);
 474                        rc = -EINVAL;
 475                        break;
 476                }
 477
 478                if (rc) {
 479                        PM8001_IO_DBG(pm8001_ha,
 480                                pm8001_printk("rc is %x\n", rc));
 481                        goto err_out_tag;
 482                }
 483                /* TODO: select normal or high priority */
 484                spin_lock(&t->task_state_lock);
 485                t->task_state_flags |= SAS_TASK_AT_INITIATOR;
 486                spin_unlock(&t->task_state_lock);
 487                pm8001_dev->running_req++;
 488                if (n > 1)
 489                        t = list_entry(t->list.next, struct sas_task, list);
 490        } while (--n);
 491        rc = 0;
 492        goto out_done;
 493
 494err_out_tag:
 495        pm8001_tag_free(pm8001_ha, tag);
 496err_out:
 497        dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
 498        if (!sas_protocol_ata(t->task_proto))
 499                if (n_elem)
 500                        dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
 501                                t->data_dir);
 502out_done:
 503        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 504        return rc;
 505}
 506
 507/**
 508  * pm8001_queue_command - register for upper layer used, all IO commands sent
 509  * to HBA are from this interface.
 510  * @task: the task to be execute.
 511  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
 512  * we always execute one one time
 513  * @gfp_flags: gfp_flags
 514  */
 515int pm8001_queue_command(struct sas_task *task, const int num,
 516                gfp_t gfp_flags)
 517{
 518        return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
 519}
 520
 521void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx)
 522{
 523        pm8001_tag_clear(pm8001_ha, ccb_idx);
 524}
 525
 526/**
 527  * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
 528  * @pm8001_ha: our hba card information
 529  * @ccb: the ccb which attached to ssp task
 530  * @task: the task to be free.
 531  * @ccb_idx: ccb index.
 532  */
 533void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
 534        struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
 535{
 536        if (!ccb->task)
 537                return;
 538        if (!sas_protocol_ata(task->task_proto))
 539                if (ccb->n_elem)
 540                        dma_unmap_sg(pm8001_ha->dev, task->scatter,
 541                                task->num_scatter, task->data_dir);
 542
 543        switch (task->task_proto) {
 544        case SAS_PROTOCOL_SMP:
 545                dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
 546                        PCI_DMA_FROMDEVICE);
 547                dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
 548                        PCI_DMA_TODEVICE);
 549                break;
 550
 551        case SAS_PROTOCOL_SATA:
 552        case SAS_PROTOCOL_STP:
 553        case SAS_PROTOCOL_SSP:
 554        default:
 555                /* do nothing */
 556                break;
 557        }
 558        task->lldd_task = NULL;
 559        ccb->task = NULL;
 560        ccb->ccb_tag = 0xFFFFFFFF;
 561        pm8001_ccb_free(pm8001_ha, ccb_idx);
 562}
 563
 564 /**
 565  * pm8001_alloc_dev - find a empty pm8001_device
 566  * @pm8001_ha: our hba card information
 567  */
 568struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
 569{
 570        u32 dev;
 571        for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
 572                if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
 573                        pm8001_ha->devices[dev].id = dev;
 574                        return &pm8001_ha->devices[dev];
 575                }
 576        }
 577        if (dev == PM8001_MAX_DEVICES) {
 578                PM8001_FAIL_DBG(pm8001_ha,
 579                        pm8001_printk("max support %d devices, ignore ..\n",
 580                        PM8001_MAX_DEVICES));
 581        }
 582        return NULL;
 583}
 584
 585static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
 586{
 587        u32 id = pm8001_dev->id;
 588        memset(pm8001_dev, 0, sizeof(*pm8001_dev));
 589        pm8001_dev->id = id;
 590        pm8001_dev->dev_type = NO_DEVICE;
 591        pm8001_dev->device_id = PM8001_MAX_DEVICES;
 592        pm8001_dev->sas_device = NULL;
 593}
 594
 595/**
 596  * pm8001_dev_found_notify - libsas notify a device is found.
 597  * @dev: the device structure which sas layer used.
 598  *
 599  * when libsas find a sas domain device, it should tell the LLDD that
 600  * device is found, and then LLDD register this device to HBA firmware
 601  * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
 602  * device ID(according to device's sas address) and returned it to LLDD. From
 603  * now on, we communicate with HBA FW with the device ID which HBA assigned
 604  * rather than sas address. it is the necessary step for our HBA but it is
 605  * the optional for other HBA driver.
 606  */
 607static int pm8001_dev_found_notify(struct domain_device *dev)
 608{
 609        unsigned long flags = 0;
 610        int res = 0;
 611        struct pm8001_hba_info *pm8001_ha = NULL;
 612        struct domain_device *parent_dev = dev->parent;
 613        struct pm8001_device *pm8001_device;
 614        DECLARE_COMPLETION_ONSTACK(completion);
 615        u32 flag = 0;
 616        pm8001_ha = pm8001_find_ha_by_dev(dev);
 617        spin_lock_irqsave(&pm8001_ha->lock, flags);
 618
 619        pm8001_device = pm8001_alloc_dev(pm8001_ha);
 620        if (!pm8001_device) {
 621                res = -1;
 622                goto found_out;
 623        }
 624        pm8001_device->sas_device = dev;
 625        dev->lldd_dev = pm8001_device;
 626        pm8001_device->dev_type = dev->dev_type;
 627        pm8001_device->dcompletion = &completion;
 628        if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
 629                int phy_id;
 630                struct ex_phy *phy;
 631                for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
 632                phy_id++) {
 633                        phy = &parent_dev->ex_dev.ex_phy[phy_id];
 634                        if (SAS_ADDR(phy->attached_sas_addr)
 635                                == SAS_ADDR(dev->sas_addr)) {
 636                                pm8001_device->attached_phy = phy_id;
 637                                break;
 638                        }
 639                }
 640                if (phy_id == parent_dev->ex_dev.num_phys) {
 641                        PM8001_FAIL_DBG(pm8001_ha,
 642                        pm8001_printk("Error: no attached dev:%016llx"
 643                        " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
 644                                SAS_ADDR(parent_dev->sas_addr)));
 645                        res = -1;
 646                }
 647        } else {
 648                if (dev->dev_type == SATA_DEV) {
 649                        pm8001_device->attached_phy =
 650                                dev->rphy->identify.phy_identifier;
 651                                flag = 1; /* directly sata*/
 652                }
 653        } /*register this device to HBA*/
 654        PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device \n"));
 655        PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
 656        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 657        wait_for_completion(&completion);
 658        if (dev->dev_type == SAS_END_DEV)
 659                msleep(50);
 660        pm8001_ha->flags |= PM8001F_RUN_TIME ;
 661        return 0;
 662found_out:
 663        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 664        return res;
 665}
 666
 667int pm8001_dev_found(struct domain_device *dev)
 668{
 669        return pm8001_dev_found_notify(dev);
 670}
 671
 672/**
 673  * pm8001_alloc_task - allocate a task structure for TMF
 674  */
 675static struct sas_task *pm8001_alloc_task(void)
 676{
 677        struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
 678        if (task) {
 679                INIT_LIST_HEAD(&task->list);
 680                spin_lock_init(&task->task_state_lock);
 681                task->task_state_flags = SAS_TASK_STATE_PENDING;
 682                init_timer(&task->timer);
 683                init_completion(&task->completion);
 684        }
 685        return task;
 686}
 687
 688static void pm8001_free_task(struct sas_task *task)
 689{
 690        if (task) {
 691                BUG_ON(!list_empty(&task->list));
 692                kfree(task);
 693        }
 694}
 695
 696static void pm8001_task_done(struct sas_task *task)
 697{
 698        if (!del_timer(&task->timer))
 699                return;
 700        complete(&task->completion);
 701}
 702
 703static void pm8001_tmf_timedout(unsigned long data)
 704{
 705        struct sas_task *task = (struct sas_task *)data;
 706
 707        task->task_state_flags |= SAS_TASK_STATE_ABORTED;
 708        complete(&task->completion);
 709}
 710
 711#define PM8001_TASK_TIMEOUT 20
 712/**
 713  * pm8001_exec_internal_tmf_task - execute some task management commands.
 714  * @dev: the wanted device.
 715  * @tmf: which task management wanted to be take.
 716  * @para_len: para_len.
 717  * @parameter: ssp task parameter.
 718  *
 719  * when errors or exception happened, we may want to do something, for example
 720  * abort the issued task which result in this execption, it is done by calling
 721  * this function, note it is also with the task execute interface.
 722  */
 723static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
 724        void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
 725{
 726        int res, retry;
 727        struct sas_task *task = NULL;
 728        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
 729
 730        for (retry = 0; retry < 3; retry++) {
 731                task = pm8001_alloc_task();
 732                if (!task)
 733                        return -ENOMEM;
 734
 735                task->dev = dev;
 736                task->task_proto = dev->tproto;
 737                memcpy(&task->ssp_task, parameter, para_len);
 738                task->task_done = pm8001_task_done;
 739                task->timer.data = (unsigned long)task;
 740                task->timer.function = pm8001_tmf_timedout;
 741                task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
 742                add_timer(&task->timer);
 743
 744                res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
 745
 746                if (res) {
 747                        del_timer(&task->timer);
 748                        PM8001_FAIL_DBG(pm8001_ha,
 749                                pm8001_printk("Executing internal task "
 750                                "failed\n"));
 751                        goto ex_err;
 752                }
 753                wait_for_completion(&task->completion);
 754                res = -TMF_RESP_FUNC_FAILED;
 755                /* Even TMF timed out, return direct. */
 756                if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 757                        if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 758                                PM8001_FAIL_DBG(pm8001_ha,
 759                                        pm8001_printk("TMF task[%x]timeout.\n",
 760                                        tmf->tmf));
 761                                goto ex_err;
 762                        }
 763                }
 764
 765                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 766                        task->task_status.stat == SAM_STAT_GOOD) {
 767                        res = TMF_RESP_FUNC_COMPLETE;
 768                        break;
 769                }
 770
 771                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 772                task->task_status.stat == SAS_DATA_UNDERRUN) {
 773                        /* no error, but return the number of bytes of
 774                        * underrun */
 775                        res = task->task_status.residual;
 776                        break;
 777                }
 778
 779                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 780                        task->task_status.stat == SAS_DATA_OVERRUN) {
 781                        PM8001_FAIL_DBG(pm8001_ha,
 782                                pm8001_printk("Blocked task error.\n"));
 783                        res = -EMSGSIZE;
 784                        break;
 785                } else {
 786                        PM8001_EH_DBG(pm8001_ha,
 787                                pm8001_printk(" Task to dev %016llx response:"
 788                                "0x%x status 0x%x\n",
 789                                SAS_ADDR(dev->sas_addr),
 790                                task->task_status.resp,
 791                                task->task_status.stat));
 792                        pm8001_free_task(task);
 793                        task = NULL;
 794                }
 795        }
 796ex_err:
 797        BUG_ON(retry == 3 && task != NULL);
 798        if (task != NULL)
 799                pm8001_free_task(task);
 800        return res;
 801}
 802
 803static int
 804pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
 805        struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
 806        u32 task_tag)
 807{
 808        int res, retry;
 809        u32 ccb_tag;
 810        struct pm8001_ccb_info *ccb;
 811        struct sas_task *task = NULL;
 812
 813        for (retry = 0; retry < 3; retry++) {
 814                task = pm8001_alloc_task();
 815                if (!task)
 816                        return -ENOMEM;
 817
 818                task->dev = dev;
 819                task->task_proto = dev->tproto;
 820                task->task_done = pm8001_task_done;
 821                task->timer.data = (unsigned long)task;
 822                task->timer.function = pm8001_tmf_timedout;
 823                task->timer.expires = jiffies + PM8001_TASK_TIMEOUT * HZ;
 824                add_timer(&task->timer);
 825
 826                res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
 827                if (res)
 828                        return res;
 829                ccb = &pm8001_ha->ccb_info[ccb_tag];
 830                ccb->device = pm8001_dev;
 831                ccb->ccb_tag = ccb_tag;
 832                ccb->task = task;
 833
 834                res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
 835                        pm8001_dev, flag, task_tag, ccb_tag);
 836
 837                if (res) {
 838                        del_timer(&task->timer);
 839                        PM8001_FAIL_DBG(pm8001_ha,
 840                                pm8001_printk("Executing internal task "
 841                                "failed\n"));
 842                        goto ex_err;
 843                }
 844                wait_for_completion(&task->completion);
 845                res = TMF_RESP_FUNC_FAILED;
 846                /* Even TMF timed out, return direct. */
 847                if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
 848                        if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
 849                                PM8001_FAIL_DBG(pm8001_ha,
 850                                        pm8001_printk("TMF task timeout.\n"));
 851                                goto ex_err;
 852                        }
 853                }
 854
 855                if (task->task_status.resp == SAS_TASK_COMPLETE &&
 856                        task->task_status.stat == SAM_STAT_GOOD) {
 857                        res = TMF_RESP_FUNC_COMPLETE;
 858                        break;
 859
 860                } else {
 861                        PM8001_EH_DBG(pm8001_ha,
 862                                pm8001_printk(" Task to dev %016llx response: "
 863                                        "0x%x status 0x%x\n",
 864                                SAS_ADDR(dev->sas_addr),
 865                                task->task_status.resp,
 866                                task->task_status.stat));
 867                        pm8001_free_task(task);
 868                        task = NULL;
 869                }
 870        }
 871ex_err:
 872        BUG_ON(retry == 3 && task != NULL);
 873        if (task != NULL)
 874                pm8001_free_task(task);
 875        return res;
 876}
 877
 878/**
 879  * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
 880  * @dev: the device structure which sas layer used.
 881  */
 882static void pm8001_dev_gone_notify(struct domain_device *dev)
 883{
 884        unsigned long flags = 0;
 885        u32 tag;
 886        struct pm8001_hba_info *pm8001_ha;
 887        struct pm8001_device *pm8001_dev = dev->lldd_dev;
 888
 889        pm8001_ha = pm8001_find_ha_by_dev(dev);
 890        spin_lock_irqsave(&pm8001_ha->lock, flags);
 891        pm8001_tag_alloc(pm8001_ha, &tag);
 892        if (pm8001_dev) {
 893                u32 device_id = pm8001_dev->device_id;
 894
 895                PM8001_DISC_DBG(pm8001_ha,
 896                        pm8001_printk("found dev[%d:%x] is gone.\n",
 897                        pm8001_dev->device_id, pm8001_dev->dev_type));
 898                if (pm8001_dev->running_req) {
 899                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 900                        pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 901                                dev, 1, 0);
 902                        spin_lock_irqsave(&pm8001_ha->lock, flags);
 903                }
 904                PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
 905                pm8001_free_dev(pm8001_dev);
 906        } else {
 907                PM8001_DISC_DBG(pm8001_ha,
 908                        pm8001_printk("Found dev has gone.\n"));
 909        }
 910        dev->lldd_dev = NULL;
 911        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 912}
 913
 914void pm8001_dev_gone(struct domain_device *dev)
 915{
 916        pm8001_dev_gone_notify(dev);
 917}
 918
 919static int pm8001_issue_ssp_tmf(struct domain_device *dev,
 920        u8 *lun, struct pm8001_tmf_task *tmf)
 921{
 922        struct sas_ssp_task ssp_task;
 923        if (!(dev->tproto & SAS_PROTOCOL_SSP))
 924                return TMF_RESP_FUNC_ESUPP;
 925
 926        strncpy((u8 *)&ssp_task.LUN, lun, 8);
 927        return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
 928                tmf);
 929}
 930
 931/**
 932  * Standard mandates link reset for ATA  (type 0) and hard reset for
 933  * SSP (type 1) , only for RECOVERY
 934  */
 935int pm8001_I_T_nexus_reset(struct domain_device *dev)
 936{
 937        int rc = TMF_RESP_FUNC_FAILED;
 938        struct pm8001_device *pm8001_dev;
 939        struct pm8001_hba_info *pm8001_ha;
 940        struct sas_phy *phy;
 941        if (!dev || !dev->lldd_dev)
 942                return -1;
 943
 944        pm8001_dev = dev->lldd_dev;
 945        pm8001_ha = pm8001_find_ha_by_dev(dev);
 946        phy = sas_find_local_phy(dev);
 947
 948        if (dev_is_sata(dev)) {
 949                DECLARE_COMPLETION_ONSTACK(completion_setstate);
 950                if (scsi_is_sas_phy_local(phy))
 951                        return 0;
 952                rc = sas_phy_reset(phy, 1);
 953                msleep(2000);
 954                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 955                        dev, 1, 0);
 956                pm8001_dev->setds_completion = &completion_setstate;
 957                rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 958                        pm8001_dev, 0x01);
 959                wait_for_completion(&completion_setstate);
 960        } else{
 961        rc = sas_phy_reset(phy, 1);
 962        msleep(2000);
 963        }
 964        PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
 965                pm8001_dev->device_id, rc));
 966        return rc;
 967}
 968
 969/* mandatory SAM-3, the task reset the specified LUN*/
 970int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
 971{
 972        int rc = TMF_RESP_FUNC_FAILED;
 973        struct pm8001_tmf_task tmf_task;
 974        struct pm8001_device *pm8001_dev = dev->lldd_dev;
 975        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
 976        if (dev_is_sata(dev)) {
 977                struct sas_phy *phy = sas_find_local_phy(dev);
 978                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
 979                        dev, 1, 0);
 980                rc = sas_phy_reset(phy, 1);
 981                rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
 982                        pm8001_dev, 0x01);
 983                msleep(2000);
 984        } else {
 985                tmf_task.tmf = TMF_LU_RESET;
 986                rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
 987        }
 988        /* If failed, fall-through I_T_Nexus reset */
 989        PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
 990                pm8001_dev->device_id, rc));
 991        return rc;
 992}
 993
 994/* optional SAM-3 */
 995int pm8001_query_task(struct sas_task *task)
 996{
 997        u32 tag = 0xdeadbeef;
 998        int i = 0;
 999        struct scsi_lun lun;
1000        struct pm8001_tmf_task tmf_task;
1001        int rc = TMF_RESP_FUNC_FAILED;
1002        if (unlikely(!task || !task->lldd_task || !task->dev))
1003                return rc;
1004
1005        if (task->task_proto & SAS_PROTOCOL_SSP) {
1006                struct scsi_cmnd *cmnd = task->uldd_task;
1007                struct domain_device *dev = task->dev;
1008                struct pm8001_hba_info *pm8001_ha =
1009                        pm8001_find_ha_by_dev(dev);
1010
1011                int_to_scsilun(cmnd->device->lun, &lun);
1012                rc = pm8001_find_tag(task, &tag);
1013                if (rc == 0) {
1014                        rc = TMF_RESP_FUNC_FAILED;
1015                        return rc;
1016                }
1017                PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
1018                for (i = 0; i < 16; i++)
1019                        printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
1020                printk(KERN_INFO "]\n");
1021                tmf_task.tmf =  TMF_QUERY_TASK;
1022                tmf_task.tag_of_task_to_be_managed = tag;
1023
1024                rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1025                switch (rc) {
1026                /* The task is still in Lun, release it then */
1027                case TMF_RESP_FUNC_SUCC:
1028                        PM8001_EH_DBG(pm8001_ha,
1029                                pm8001_printk("The task is still in Lun \n"));
1030                /* The task is not in Lun or failed, reset the phy */
1031                case TMF_RESP_FUNC_FAILED:
1032                case TMF_RESP_FUNC_COMPLETE:
1033                        PM8001_EH_DBG(pm8001_ha,
1034                        pm8001_printk("The task is not in Lun or failed,"
1035                        " reset the phy \n"));
1036                        break;
1037                }
1038        }
1039        pm8001_printk(":rc= %d\n", rc);
1040        return rc;
1041}
1042
1043/*  mandatory SAM-3, still need free task/ccb info, abord the specified task */
1044int pm8001_abort_task(struct sas_task *task)
1045{
1046        unsigned long flags;
1047        u32 tag = 0xdeadbeef;
1048        u32 device_id;
1049        struct domain_device *dev ;
1050        struct pm8001_hba_info *pm8001_ha = NULL;
1051        struct pm8001_ccb_info *ccb;
1052        struct scsi_lun lun;
1053        struct pm8001_device *pm8001_dev;
1054        struct pm8001_tmf_task tmf_task;
1055        int rc = TMF_RESP_FUNC_FAILED;
1056        if (unlikely(!task || !task->lldd_task || !task->dev))
1057                return rc;
1058        spin_lock_irqsave(&task->task_state_lock, flags);
1059        if (task->task_state_flags & SAS_TASK_STATE_DONE) {
1060                spin_unlock_irqrestore(&task->task_state_lock, flags);
1061                rc = TMF_RESP_FUNC_COMPLETE;
1062                goto out;
1063        }
1064        spin_unlock_irqrestore(&task->task_state_lock, flags);
1065        if (task->task_proto & SAS_PROTOCOL_SSP) {
1066                struct scsi_cmnd *cmnd = task->uldd_task;
1067                dev = task->dev;
1068                ccb = task->lldd_task;
1069                pm8001_dev = dev->lldd_dev;
1070                pm8001_ha = pm8001_find_ha_by_dev(dev);
1071                int_to_scsilun(cmnd->device->lun, &lun);
1072                rc = pm8001_find_tag(task, &tag);
1073                if (rc == 0) {
1074                        printk(KERN_INFO "No such tag in %s\n", __func__);
1075                        rc = TMF_RESP_FUNC_FAILED;
1076                        return rc;
1077                }
1078                device_id = pm8001_dev->device_id;
1079                PM8001_EH_DBG(pm8001_ha,
1080                        pm8001_printk("abort io to deviceid= %d\n", device_id));
1081                tmf_task.tmf = TMF_ABORT_TASK;
1082                tmf_task.tag_of_task_to_be_managed = tag;
1083                rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
1084                pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1085                        pm8001_dev->sas_device, 0, tag);
1086        } else if (task->task_proto & SAS_PROTOCOL_SATA ||
1087                task->task_proto & SAS_PROTOCOL_STP) {
1088                dev = task->dev;
1089                pm8001_dev = dev->lldd_dev;
1090                pm8001_ha = pm8001_find_ha_by_dev(dev);
1091                rc = pm8001_find_tag(task, &tag);
1092                if (rc == 0) {
1093                        printk(KERN_INFO "No such tag in %s\n", __func__);
1094                        rc = TMF_RESP_FUNC_FAILED;
1095                        return rc;
1096                }
1097                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1098                        pm8001_dev->sas_device, 0, tag);
1099        } else if (task->task_proto & SAS_PROTOCOL_SMP) {
1100                /* SMP */
1101                dev = task->dev;
1102                pm8001_dev = dev->lldd_dev;
1103                pm8001_ha = pm8001_find_ha_by_dev(dev);
1104                rc = pm8001_find_tag(task, &tag);
1105                if (rc == 0) {
1106                        printk(KERN_INFO "No such tag in %s\n", __func__);
1107                        rc = TMF_RESP_FUNC_FAILED;
1108                        return rc;
1109                }
1110                rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
1111                        pm8001_dev->sas_device, 0, tag);
1112
1113        }
1114out:
1115        if (rc != TMF_RESP_FUNC_COMPLETE)
1116                pm8001_printk("rc= %d\n", rc);
1117        return rc;
1118}
1119
1120int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
1121{
1122        int rc = TMF_RESP_FUNC_FAILED;
1123        struct pm8001_tmf_task tmf_task;
1124
1125        tmf_task.tmf = TMF_ABORT_TASK_SET;
1126        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1127        return rc;
1128}
1129
1130int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
1131{
1132        int rc = TMF_RESP_FUNC_FAILED;
1133        struct pm8001_tmf_task tmf_task;
1134
1135        tmf_task.tmf = TMF_CLEAR_ACA;
1136        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1137
1138        return rc;
1139}
1140
1141int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
1142{
1143        int rc = TMF_RESP_FUNC_FAILED;
1144        struct pm8001_tmf_task tmf_task;
1145        struct pm8001_device *pm8001_dev = dev->lldd_dev;
1146        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
1147
1148        PM8001_EH_DBG(pm8001_ha,
1149                pm8001_printk("I_T_L_Q clear task set[%x]\n",
1150                pm8001_dev->device_id));
1151        tmf_task.tmf = TMF_CLEAR_TASK_SET;
1152        rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
1153        return rc;
1154}
1155
1156