1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18#include <linux/module.h>
19#include <linux/kernel.h>
20#include <linux/init.h>
21#include <linux/wait.h>
22#include <linux/list.h>
23#include <linux/slab.h>
24#include <linux/time.h>
25#include <linux/mm.h>
26#include <linux/usb.h>
27#include <linux/i2c.h>
28#include <asm/byteorder.h>
29#include <media/tvaudio.h>
30
31#include "go7007-priv.h"
32#include "wis-i2c.h"
33
34static unsigned int assume_endura;
35module_param(assume_endura, int, 0644);
36MODULE_PARM_DESC(assume_endura, "when probing fails, "
37 "hardware is a Pelco Endura");
38
39
40
41
42#define HPI_STATUS_ADDR 0xFFF4
43#define INT_PARAM_ADDR 0xFFF6
44#define INT_INDEX_ADDR 0xFFF8
45
46
47
48
49
50
51
52
53
54
55
56#define GO7007_USB_EZUSB (1<<0)
57#define GO7007_USB_EZUSB_I2C (1<<1)
58
59struct go7007_usb_board {
60 unsigned int flags;
61 struct go7007_board_info main_info;
62};
63
64struct go7007_usb {
65 struct go7007_usb_board *board;
66 struct mutex i2c_lock;
67 struct usb_device *usbdev;
68 struct urb *video_urbs[8];
69 struct urb *audio_urbs[8];
70 struct urb *intr_urb;
71};
72
73
74
75static struct go7007_usb_board board_matrix_ii = {
76 .flags = GO7007_USB_EZUSB,
77 .main_info = {
78 .firmware = "go7007tv.bin",
79 .flags = GO7007_BOARD_HAS_AUDIO |
80 GO7007_BOARD_USE_ONBOARD_I2C,
81 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
82 GO7007_AUDIO_WORD_16,
83 .audio_rate = 48000,
84 .audio_bclk_div = 8,
85 .audio_main_div = 2,
86 .hpi_buffer_cap = 7,
87 .sensor_flags = GO7007_SENSOR_656 |
88 GO7007_SENSOR_VALID_ENABLE |
89 GO7007_SENSOR_TV |
90 GO7007_SENSOR_VBI |
91 GO7007_SENSOR_SCALING,
92 .num_i2c_devs = 1,
93 .i2c_devs = {
94 {
95 .type = "wis_saa7115",
96 .id = I2C_DRIVERID_WIS_SAA7115,
97 .addr = 0x20,
98 },
99 },
100 .num_inputs = 2,
101 .inputs = {
102 {
103 .video_input = 0,
104 .name = "Composite",
105 },
106 {
107 .video_input = 9,
108 .name = "S-Video",
109 },
110 },
111 },
112};
113
114static struct go7007_usb_board board_matrix_reload = {
115 .flags = GO7007_USB_EZUSB,
116 .main_info = {
117 .firmware = "go7007tv.bin",
118 .flags = GO7007_BOARD_HAS_AUDIO |
119 GO7007_BOARD_USE_ONBOARD_I2C,
120 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
121 GO7007_AUDIO_I2S_MASTER |
122 GO7007_AUDIO_WORD_16,
123 .audio_rate = 48000,
124 .audio_bclk_div = 8,
125 .audio_main_div = 2,
126 .hpi_buffer_cap = 7,
127 .sensor_flags = GO7007_SENSOR_656 |
128 GO7007_SENSOR_TV,
129 .num_i2c_devs = 1,
130 .i2c_devs = {
131 {
132 .type = "wis_saa7113",
133 .id = I2C_DRIVERID_WIS_SAA7113,
134 .addr = 0x25,
135 },
136 },
137 .num_inputs = 2,
138 .inputs = {
139 {
140 .video_input = 0,
141 .name = "Composite",
142 },
143 {
144 .video_input = 9,
145 .name = "S-Video",
146 },
147 },
148 },
149};
150
151static struct go7007_usb_board board_star_trek = {
152 .flags = GO7007_USB_EZUSB | GO7007_USB_EZUSB_I2C,
153 .main_info = {
154 .firmware = "go7007tv.bin",
155 .flags = GO7007_BOARD_HAS_AUDIO,
156
157 .sensor_flags = GO7007_SENSOR_656 |
158 GO7007_SENSOR_VALID_ENABLE |
159 GO7007_SENSOR_TV |
160 GO7007_SENSOR_VBI |
161 GO7007_SENSOR_SCALING,
162 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
163 GO7007_AUDIO_WORD_16,
164 .audio_bclk_div = 8,
165 .audio_main_div = 2,
166 .hpi_buffer_cap = 7,
167 .num_i2c_devs = 1,
168 .i2c_devs = {
169 {
170 .type = "wis_saa7115",
171 .id = I2C_DRIVERID_WIS_SAA7115,
172 .addr = 0x20,
173 },
174 },
175 .num_inputs = 2,
176 .inputs = {
177 {
178 .video_input = 1,
179
180 .name = "Composite",
181 },
182 {
183 .video_input = 8,
184
185 .name = "S-Video",
186 },
187
188
189
190
191
192
193 },
194 },
195};
196
197static struct go7007_usb_board board_px_tv402u = {
198 .flags = GO7007_USB_EZUSB | GO7007_USB_EZUSB_I2C,
199 .main_info = {
200 .firmware = "go7007tv.bin",
201 .flags = GO7007_BOARD_HAS_AUDIO |
202 GO7007_BOARD_HAS_TUNER,
203 .sensor_flags = GO7007_SENSOR_656 |
204 GO7007_SENSOR_VALID_ENABLE |
205 GO7007_SENSOR_TV |
206 GO7007_SENSOR_VBI |
207 GO7007_SENSOR_SCALING,
208 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
209 GO7007_AUDIO_WORD_16,
210 .audio_bclk_div = 8,
211 .audio_main_div = 2,
212 .hpi_buffer_cap = 7,
213 .num_i2c_devs = 3,
214 .i2c_devs = {
215 {
216 .type = "wis_saa7115",
217 .id = I2C_DRIVERID_WIS_SAA7115,
218 .addr = 0x20,
219 },
220 {
221 .type = "wis_uda1342",
222 .id = I2C_DRIVERID_WIS_UDA1342,
223 .addr = 0x1a,
224 },
225 {
226 .type = "wis_sony_tuner",
227 .id = I2C_DRIVERID_WIS_SONY_TUNER,
228 .addr = 0x60,
229 },
230 },
231 .num_inputs = 3,
232 .inputs = {
233 {
234 .video_input = 1,
235 .audio_input = TVAUDIO_INPUT_EXTERN,
236 .name = "Composite",
237 },
238 {
239 .video_input = 8,
240 .audio_input = TVAUDIO_INPUT_EXTERN,
241 .name = "S-Video",
242 },
243 {
244 .video_input = 3,
245 .audio_input = TVAUDIO_INPUT_TUNER,
246 .name = "Tuner",
247 },
248 },
249 },
250};
251
252static struct go7007_usb_board board_xmen = {
253 .flags = 0,
254 .main_info = {
255 .firmware = "go7007tv.bin",
256 .flags = GO7007_BOARD_USE_ONBOARD_I2C,
257 .hpi_buffer_cap = 0,
258 .sensor_flags = GO7007_SENSOR_VREF_POLAR,
259 .sensor_width = 320,
260 .sensor_height = 240,
261 .sensor_framerate = 30030,
262 .audio_flags = GO7007_AUDIO_ONE_CHANNEL |
263 GO7007_AUDIO_I2S_MODE_3 |
264 GO7007_AUDIO_WORD_14 |
265 GO7007_AUDIO_I2S_MASTER |
266 GO7007_AUDIO_BCLK_POLAR |
267 GO7007_AUDIO_OKI_MODE,
268 .audio_rate = 8000,
269 .audio_bclk_div = 48,
270 .audio_main_div = 1,
271 .num_i2c_devs = 1,
272 .i2c_devs = {
273 {
274 .type = "wis_ov7640",
275 .id = I2C_DRIVERID_WIS_OV7640,
276 .addr = 0x21,
277 },
278 },
279 .num_inputs = 1,
280 .inputs = {
281 {
282 .name = "Camera",
283 },
284 },
285 },
286};
287
288static struct go7007_usb_board board_matrix_revolution = {
289 .flags = GO7007_USB_EZUSB,
290 .main_info = {
291 .firmware = "go7007tv.bin",
292 .flags = GO7007_BOARD_HAS_AUDIO |
293 GO7007_BOARD_USE_ONBOARD_I2C,
294 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
295 GO7007_AUDIO_I2S_MASTER |
296 GO7007_AUDIO_WORD_16,
297 .audio_rate = 48000,
298 .audio_bclk_div = 8,
299 .audio_main_div = 2,
300 .hpi_buffer_cap = 7,
301 .sensor_flags = GO7007_SENSOR_656 |
302 GO7007_SENSOR_TV |
303 GO7007_SENSOR_VBI,
304 .num_i2c_devs = 1,
305 .i2c_devs = {
306 {
307 .type = "wis_tw9903",
308 .id = I2C_DRIVERID_WIS_TW9903,
309 .addr = 0x44,
310 },
311 },
312 .num_inputs = 2,
313 .inputs = {
314 {
315 .video_input = 2,
316 .name = "Composite",
317 },
318 {
319 .video_input = 8,
320 .name = "S-Video",
321 },
322 },
323 },
324};
325
326static struct go7007_usb_board board_lifeview_lr192 = {
327 .flags = GO7007_USB_EZUSB,
328 .main_info = {
329 .firmware = "go7007tv.bin",
330 .flags = GO7007_BOARD_HAS_AUDIO |
331 GO7007_BOARD_USE_ONBOARD_I2C,
332 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
333 GO7007_AUDIO_WORD_16,
334 .audio_rate = 48000,
335 .audio_bclk_div = 8,
336 .audio_main_div = 2,
337 .hpi_buffer_cap = 7,
338 .sensor_flags = GO7007_SENSOR_656 |
339 GO7007_SENSOR_VALID_ENABLE |
340 GO7007_SENSOR_TV |
341 GO7007_SENSOR_VBI |
342 GO7007_SENSOR_SCALING,
343 .num_i2c_devs = 0,
344 .num_inputs = 1,
345 .inputs = {
346 {
347 .video_input = 0,
348 .name = "Composite",
349 },
350 },
351 },
352};
353
354static struct go7007_usb_board board_endura = {
355 .flags = 0,
356 .main_info = {
357 .firmware = "go7007tv.bin",
358 .flags = 0,
359 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
360 GO7007_AUDIO_I2S_MASTER |
361 GO7007_AUDIO_WORD_16,
362 .audio_rate = 8000,
363 .audio_bclk_div = 48,
364 .audio_main_div = 8,
365 .hpi_buffer_cap = 0,
366 .sensor_flags = GO7007_SENSOR_656 |
367 GO7007_SENSOR_TV,
368 .sensor_h_offset = 8,
369 .num_i2c_devs = 0,
370 .num_inputs = 1,
371 .inputs = {
372 {
373 .name = "Camera",
374 },
375 },
376 },
377};
378
379static struct go7007_usb_board board_adlink_mpg24 = {
380 .flags = 0,
381 .main_info = {
382 .firmware = "go7007tv.bin",
383 .flags = GO7007_BOARD_USE_ONBOARD_I2C,
384 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
385 GO7007_AUDIO_I2S_MASTER |
386 GO7007_AUDIO_WORD_16,
387 .audio_rate = 48000,
388 .audio_bclk_div = 8,
389 .audio_main_div = 2,
390 .hpi_buffer_cap = 0,
391 .sensor_flags = GO7007_SENSOR_656 |
392 GO7007_SENSOR_TV |
393 GO7007_SENSOR_VBI,
394 .num_i2c_devs = 1,
395 .i2c_devs = {
396 {
397 .type = "wis_tw2804",
398 .id = I2C_DRIVERID_WIS_TW2804,
399 .addr = 0x00,
400 },
401 },
402 .num_inputs = 1,
403 .inputs = {
404 {
405 .name = "Composite",
406 },
407 },
408 },
409};
410
411static struct go7007_usb_board board_sensoray_2250 = {
412 .flags = GO7007_USB_EZUSB | GO7007_USB_EZUSB_I2C,
413 .main_info = {
414 .firmware = "go7007tv.bin",
415 .audio_flags = GO7007_AUDIO_I2S_MODE_1 |
416 GO7007_AUDIO_I2S_MASTER |
417 GO7007_AUDIO_WORD_16,
418 .flags = GO7007_BOARD_HAS_AUDIO,
419 .audio_rate = 48000,
420 .audio_bclk_div = 8,
421 .audio_main_div = 2,
422 .hpi_buffer_cap = 7,
423 .sensor_flags = GO7007_SENSOR_656 |
424 GO7007_SENSOR_TV,
425 .num_i2c_devs = 1,
426 .i2c_devs = {
427 {
428 .type = "s2250",
429 .id = I2C_DRIVERID_S2250,
430 .addr = 0x43,
431 },
432 },
433 .num_inputs = 2,
434 .inputs = {
435 {
436 .video_input = 0,
437 .name = "Composite",
438 },
439 {
440 .video_input = 1,
441 .name = "S-Video",
442 },
443 },
444 },
445};
446
447MODULE_FIRMWARE("go7007tv.bin");
448
449static const struct usb_device_id go7007_usb_id_table[] = {
450 {
451 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION |
452 USB_DEVICE_ID_MATCH_INT_INFO,
453 .idVendor = 0x0eb1,
454 .idProduct = 0x7007,
455 .bcdDevice_lo = 0x200,
456 .bcdDevice_hi = 0x200,
457 .bInterfaceClass = 255,
458 .bInterfaceSubClass = 0,
459 .bInterfaceProtocol = 255,
460 .driver_info = (kernel_ulong_t)GO7007_BOARDID_XMEN,
461 },
462 {
463 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
464 .idVendor = 0x0eb1,
465 .idProduct = 0x7007,
466 .bcdDevice_lo = 0x202,
467 .bcdDevice_hi = 0x202,
468 .driver_info = (kernel_ulong_t)GO7007_BOARDID_MATRIX_II,
469 },
470 {
471 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
472 .idVendor = 0x0eb1,
473 .idProduct = 0x7007,
474 .bcdDevice_lo = 0x204,
475 .bcdDevice_hi = 0x204,
476 .driver_info = (kernel_ulong_t)GO7007_BOARDID_MATRIX_RELOAD,
477 },
478 {
479 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION |
480 USB_DEVICE_ID_MATCH_INT_INFO,
481 .idVendor = 0x0eb1,
482 .idProduct = 0x7007,
483 .bcdDevice_lo = 0x205,
484 .bcdDevice_hi = 0x205,
485 .bInterfaceClass = 255,
486 .bInterfaceSubClass = 0,
487 .bInterfaceProtocol = 255,
488 .driver_info = (kernel_ulong_t)GO7007_BOARDID_XMEN_II,
489 },
490 {
491 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
492 .idVendor = 0x0eb1,
493 .idProduct = 0x7007,
494 .bcdDevice_lo = 0x208,
495 .bcdDevice_hi = 0x208,
496 .driver_info = (kernel_ulong_t)GO7007_BOARDID_STAR_TREK,
497 },
498 {
499 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION |
500 USB_DEVICE_ID_MATCH_INT_INFO,
501 .idVendor = 0x0eb1,
502 .idProduct = 0x7007,
503 .bcdDevice_lo = 0x209,
504 .bcdDevice_hi = 0x209,
505 .bInterfaceClass = 255,
506 .bInterfaceSubClass = 0,
507 .bInterfaceProtocol = 255,
508 .driver_info = (kernel_ulong_t)GO7007_BOARDID_XMEN_III,
509 },
510 {
511 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
512 .idVendor = 0x0eb1,
513 .idProduct = 0x7007,
514 .bcdDevice_lo = 0x210,
515 .bcdDevice_hi = 0x210,
516 .driver_info = (kernel_ulong_t)GO7007_BOARDID_MATRIX_REV,
517 },
518 {
519 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
520 .idVendor = 0x093b,
521 .idProduct = 0xa102,
522 .bcdDevice_lo = 0x1,
523 .bcdDevice_hi = 0x1,
524 .driver_info = (kernel_ulong_t)GO7007_BOARDID_PX_M402U,
525 },
526 {
527 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
528 .idVendor = 0x093b,
529 .idProduct = 0xa104,
530 .bcdDevice_lo = 0x1,
531 .bcdDevice_hi = 0x1,
532 .driver_info = (kernel_ulong_t)GO7007_BOARDID_PX_TV402U_ANY,
533 },
534 {
535 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
536 .idVendor = 0x10fd,
537 .idProduct = 0xde00,
538 .bcdDevice_lo = 0x1,
539 .bcdDevice_hi = 0x1,
540 .driver_info = (kernel_ulong_t)GO7007_BOARDID_LIFEVIEW_LR192,
541 },
542 {
543 .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION,
544 .idVendor = 0x1943,
545 .idProduct = 0x2250,
546 .bcdDevice_lo = 0x1,
547 .bcdDevice_hi = 0x1,
548 .driver_info = (kernel_ulong_t)GO7007_BOARDID_SENSORAY_2250,
549 },
550 { }
551};
552
553MODULE_DEVICE_TABLE(usb, go7007_usb_id_table);
554
555
556
557static int go7007_usb_vendor_request(struct go7007 *go, int request,
558 int value, int index, void *transfer_buffer, int length, int in)
559{
560 struct go7007_usb *usb = go->hpi_context;
561 int timeout = 5000;
562
563 if (in) {
564 return usb_control_msg(usb->usbdev,
565 usb_rcvctrlpipe(usb->usbdev, 0), request,
566 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
567 value, index, transfer_buffer, length, timeout);
568 } else {
569 return usb_control_msg(usb->usbdev,
570 usb_sndctrlpipe(usb->usbdev, 0), request,
571 USB_TYPE_VENDOR | USB_RECIP_DEVICE,
572 value, index, transfer_buffer, length, timeout);
573 }
574}
575
576static int go7007_usb_interface_reset(struct go7007 *go)
577{
578 struct go7007_usb *usb = go->hpi_context;
579 u16 intr_val, intr_data;
580
581
582 if (go7007_write_interrupt(go, 0x0001, 0x0001) < 0)
583 return -1;
584 msleep(100);
585
586 if (usb->board->flags & GO7007_USB_EZUSB) {
587
588#ifdef GO7007_USB_DEBUG
589 printk(KERN_DEBUG "go7007-usb: resetting EZ-USB buffers\n");
590#endif
591 if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 ||
592 go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0)
593 return -1;
594
595
596 if (go7007_write_interrupt(go, 0x0001, 0x0001) < 0)
597 return -1;
598 msleep(100);
599 }
600
601
602 if (go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
603 (intr_val & ~0x1) != 0x55aa) {
604 printk(KERN_ERR
605 "go7007-usb: unable to reset the USB interface\n");
606 return -1;
607 }
608 return 0;
609}
610
611static int go7007_usb_ezusb_write_interrupt(struct go7007 *go,
612 int addr, int data)
613{
614 struct go7007_usb *usb = go->hpi_context;
615 int i, r;
616 u16 status_reg;
617 int timeout = 500;
618
619#ifdef GO7007_USB_DEBUG
620 printk(KERN_DEBUG
621 "go7007-usb: WriteInterrupt: %04x %04x\n", addr, data);
622#endif
623
624 for (i = 0; i < 100; ++i) {
625 r = usb_control_msg(usb->usbdev,
626 usb_rcvctrlpipe(usb->usbdev, 0), 0x14,
627 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
628 0, HPI_STATUS_ADDR, &status_reg,
629 sizeof(status_reg), timeout);
630 if (r < 0)
631 goto write_int_error;
632 __le16_to_cpus(&status_reg);
633 if (!(status_reg & 0x0010))
634 break;
635 msleep(10);
636 }
637 if (i == 100) {
638 printk(KERN_ERR
639 "go7007-usb: device is hung, status reg = 0x%04x\n",
640 status_reg);
641 return -1;
642 }
643 r = usb_control_msg(usb->usbdev, usb_sndctrlpipe(usb->usbdev, 0), 0x12,
644 USB_TYPE_VENDOR | USB_RECIP_DEVICE, data,
645 INT_PARAM_ADDR, NULL, 0, timeout);
646 if (r < 0)
647 goto write_int_error;
648 r = usb_control_msg(usb->usbdev, usb_sndctrlpipe(usb->usbdev, 0),
649 0x12, USB_TYPE_VENDOR | USB_RECIP_DEVICE, addr,
650 INT_INDEX_ADDR, NULL, 0, timeout);
651 if (r < 0)
652 goto write_int_error;
653 return 0;
654
655write_int_error:
656 printk(KERN_ERR "go7007-usb: error in WriteInterrupt: %d\n", r);
657 return r;
658}
659
660static int go7007_usb_onboard_write_interrupt(struct go7007 *go,
661 int addr, int data)
662{
663 struct go7007_usb *usb = go->hpi_context;
664 u8 *tbuf;
665 int r;
666 int timeout = 500;
667
668#ifdef GO7007_USB_DEBUG
669 printk(KERN_DEBUG
670 "go7007-usb: WriteInterrupt: %04x %04x\n", addr, data);
671#endif
672
673 tbuf = kzalloc(8, GFP_KERNEL);
674 if (tbuf == NULL)
675 return -ENOMEM;
676 tbuf[0] = data & 0xff;
677 tbuf[1] = data >> 8;
678 tbuf[2] = addr & 0xff;
679 tbuf[3] = addr >> 8;
680 r = usb_control_msg(usb->usbdev, usb_sndctrlpipe(usb->usbdev, 2), 0x00,
681 USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0x55aa,
682 0xf0f0, tbuf, 8, timeout);
683 kfree(tbuf);
684 if (r < 0) {
685 printk(KERN_ERR "go7007-usb: error in WriteInterrupt: %d\n", r);
686 return r;
687 }
688 return 0;
689}
690
691static void go7007_usb_readinterrupt_complete(struct urb *urb)
692{
693 struct go7007 *go = (struct go7007 *)urb->context;
694 u16 *regs = (u16 *)urb->transfer_buffer;
695 int status = urb->status;
696
697 if (status) {
698 if (status != -ESHUTDOWN &&
699 go->status != STATUS_SHUTDOWN) {
700 printk(KERN_ERR
701 "go7007-usb: error in read interrupt: %d\n",
702 urb->status);
703 } else {
704 wake_up(&go->interrupt_waitq);
705 return;
706 }
707 } else if (urb->actual_length != urb->transfer_buffer_length) {
708 printk(KERN_ERR "go7007-usb: short read in interrupt pipe!\n");
709 } else {
710 go->interrupt_available = 1;
711 go->interrupt_data = __le16_to_cpu(regs[0]);
712 go->interrupt_value = __le16_to_cpu(regs[1]);
713#ifdef GO7007_USB_DEBUG
714 printk(KERN_DEBUG "go7007-usb: ReadInterrupt: %04x %04x\n",
715 go->interrupt_value, go->interrupt_data);
716#endif
717 }
718
719 wake_up(&go->interrupt_waitq);
720}
721
722static int go7007_usb_read_interrupt(struct go7007 *go)
723{
724 struct go7007_usb *usb = go->hpi_context;
725 int r;
726
727 r = usb_submit_urb(usb->intr_urb, GFP_KERNEL);
728 if (r < 0) {
729 printk(KERN_ERR
730 "go7007-usb: unable to submit interrupt urb: %d\n", r);
731 return r;
732 }
733 return 0;
734}
735
736static void go7007_usb_read_video_pipe_complete(struct urb *urb)
737{
738 struct go7007 *go = (struct go7007 *)urb->context;
739 int r, status = urb->status;
740
741 if (!go->streaming) {
742 wake_up_interruptible(&go->frame_waitq);
743 return;
744 }
745 if (status) {
746 printk(KERN_ERR "go7007-usb: error in video pipe: %d\n",
747 status);
748 return;
749 }
750 if (urb->actual_length != urb->transfer_buffer_length) {
751 printk(KERN_ERR "go7007-usb: short read in video pipe!\n");
752 return;
753 }
754 go7007_parse_video_stream(go, urb->transfer_buffer, urb->actual_length);
755 r = usb_submit_urb(urb, GFP_ATOMIC);
756 if (r < 0)
757 printk(KERN_ERR "go7007-usb: error in video pipe: %d\n", r);
758}
759
760static void go7007_usb_read_audio_pipe_complete(struct urb *urb)
761{
762 struct go7007 *go = (struct go7007 *)urb->context;
763 int r, status = urb->status;
764
765 if (!go->streaming)
766 return;
767 if (status) {
768 printk(KERN_ERR "go7007-usb: error in audio pipe: %d\n",
769 status);
770 return;
771 }
772 if (urb->actual_length != urb->transfer_buffer_length) {
773 printk(KERN_ERR "go7007-usb: short read in audio pipe!\n");
774 return;
775 }
776 if (go->audio_deliver != NULL)
777 go->audio_deliver(go, urb->transfer_buffer, urb->actual_length);
778 r = usb_submit_urb(urb, GFP_ATOMIC);
779 if (r < 0)
780 printk(KERN_ERR "go7007-usb: error in audio pipe: %d\n", r);
781}
782
783static int go7007_usb_stream_start(struct go7007 *go)
784{
785 struct go7007_usb *usb = go->hpi_context;
786 int i, r;
787
788 for (i = 0; i < 8; ++i) {
789 r = usb_submit_urb(usb->video_urbs[i], GFP_KERNEL);
790 if (r < 0) {
791 printk(KERN_ERR "go7007-usb: error submitting video "
792 "urb %d: %d\n", i, r);
793 goto video_submit_failed;
794 }
795 }
796 if (!go->audio_enabled)
797 return 0;
798
799 for (i = 0; i < 8; ++i) {
800 r = usb_submit_urb(usb->audio_urbs[i], GFP_KERNEL);
801 if (r < 0) {
802 printk(KERN_ERR "go7007-usb: error submitting audio "
803 "urb %d: %d\n", i, r);
804 goto audio_submit_failed;
805 }
806 }
807 return 0;
808
809audio_submit_failed:
810 for (i = 0; i < 7; ++i)
811 usb_kill_urb(usb->audio_urbs[i]);
812video_submit_failed:
813 for (i = 0; i < 8; ++i)
814 usb_kill_urb(usb->video_urbs[i]);
815 return -1;
816}
817
818static int go7007_usb_stream_stop(struct go7007 *go)
819{
820 struct go7007_usb *usb = go->hpi_context;
821 int i;
822
823 if (go->status == STATUS_SHUTDOWN)
824 return 0;
825 for (i = 0; i < 8; ++i)
826 usb_kill_urb(usb->video_urbs[i]);
827 if (go->audio_enabled)
828 for (i = 0; i < 8; ++i)
829 usb_kill_urb(usb->audio_urbs[i]);
830 return 0;
831}
832
833static int go7007_usb_send_firmware(struct go7007 *go, u8 *data, int len)
834{
835 struct go7007_usb *usb = go->hpi_context;
836 int transferred, pipe;
837 int timeout = 500;
838
839#ifdef GO7007_USB_DEBUG
840 printk(KERN_DEBUG "go7007-usb: DownloadBuffer sending %d bytes\n", len);
841#endif
842
843 if (usb->board->flags & GO7007_USB_EZUSB)
844 pipe = usb_sndbulkpipe(usb->usbdev, 2);
845 else
846 pipe = usb_sndbulkpipe(usb->usbdev, 3);
847
848 return usb_bulk_msg(usb->usbdev, pipe, data, len,
849 &transferred, timeout);
850}
851
852static struct go7007_hpi_ops go7007_usb_ezusb_hpi_ops = {
853 .interface_reset = go7007_usb_interface_reset,
854 .write_interrupt = go7007_usb_ezusb_write_interrupt,
855 .read_interrupt = go7007_usb_read_interrupt,
856 .stream_start = go7007_usb_stream_start,
857 .stream_stop = go7007_usb_stream_stop,
858 .send_firmware = go7007_usb_send_firmware,
859};
860
861static struct go7007_hpi_ops go7007_usb_onboard_hpi_ops = {
862 .interface_reset = go7007_usb_interface_reset,
863 .write_interrupt = go7007_usb_onboard_write_interrupt,
864 .read_interrupt = go7007_usb_read_interrupt,
865 .stream_start = go7007_usb_stream_start,
866 .stream_stop = go7007_usb_stream_stop,
867 .send_firmware = go7007_usb_send_firmware,
868};
869
870
871
872static int go7007_usb_i2c_master_xfer(struct i2c_adapter *adapter,
873 struct i2c_msg msgs[], int num)
874{
875 struct go7007 *go = i2c_get_adapdata(adapter);
876 struct go7007_usb *usb = go->hpi_context;
877 u8 buf[16];
878 int buf_len, i;
879 int ret = -1;
880
881 if (go->status == STATUS_SHUTDOWN)
882 return -1;
883
884 mutex_lock(&usb->i2c_lock);
885
886 for (i = 0; i < num; ++i) {
887
888
889
890 if (i + 1 < num && msgs[i].addr == msgs[i + 1].addr &&
891 !(msgs[i].flags & I2C_M_RD) &&
892 (msgs[i + 1].flags & I2C_M_RD)) {
893#ifdef GO7007_I2C_DEBUG
894 printk(KERN_DEBUG "go7007-usb: i2c write/read %d/%d "
895 "bytes on %02x\n", msgs[i].len,
896 msgs[i + 1].len, msgs[i].addr);
897#endif
898 buf[0] = 0x01;
899 buf[1] = msgs[i].len + 1;
900 buf[2] = msgs[i].addr << 1;
901 memcpy(&buf[3], msgs[i].buf, msgs[i].len);
902 buf_len = msgs[i].len + 3;
903 buf[buf_len++] = msgs[++i].len;
904 } else if (msgs[i].flags & I2C_M_RD) {
905#ifdef GO7007_I2C_DEBUG
906 printk(KERN_DEBUG "go7007-usb: i2c read %d "
907 "bytes on %02x\n", msgs[i].len,
908 msgs[i].addr);
909#endif
910 buf[0] = 0x01;
911 buf[1] = 1;
912 buf[2] = msgs[i].addr << 1;
913 buf[3] = msgs[i].len;
914 buf_len = 4;
915 } else {
916#ifdef GO7007_I2C_DEBUG
917 printk(KERN_DEBUG "go7007-usb: i2c write %d "
918 "bytes on %02x\n", msgs[i].len,
919 msgs[i].addr);
920#endif
921 buf[0] = 0x00;
922 buf[1] = msgs[i].len + 1;
923 buf[2] = msgs[i].addr << 1;
924 memcpy(&buf[3], msgs[i].buf, msgs[i].len);
925 buf_len = msgs[i].len + 3;
926 buf[buf_len++] = 0;
927 }
928 if (go7007_usb_vendor_request(go, 0x24, 0, 0,
929 buf, buf_len, 0) < 0)
930 goto i2c_done;
931 if (msgs[i].flags & I2C_M_RD) {
932 memset(buf, 0, sizeof(buf));
933 if (go7007_usb_vendor_request(go, 0x25, 0, 0, buf,
934 msgs[i].len + 1, 1) < 0)
935 goto i2c_done;
936 memcpy(msgs[i].buf, buf + 1, msgs[i].len);
937 }
938 }
939 ret = 0;
940
941i2c_done:
942 mutex_unlock(&usb->i2c_lock);
943 return ret;
944}
945
946static u32 go7007_usb_functionality(struct i2c_adapter *adapter)
947{
948
949
950 return (I2C_FUNC_SMBUS_EMUL) & ~I2C_FUNC_SMBUS_QUICK;
951}
952
953static struct i2c_algorithm go7007_usb_algo = {
954 .master_xfer = go7007_usb_i2c_master_xfer,
955 .functionality = go7007_usb_functionality,
956};
957
958static struct i2c_adapter go7007_usb_adap_templ = {
959 .owner = THIS_MODULE,
960 .name = "WIS GO7007SB EZ-USB",
961 .algo = &go7007_usb_algo,
962};
963
964
965
966static int go7007_usb_probe(struct usb_interface *intf,
967 const struct usb_device_id *id)
968{
969 struct go7007 *go;
970 struct go7007_usb *usb;
971 struct go7007_usb_board *board;
972 struct usb_device *usbdev = interface_to_usbdev(intf);
973 char *name;
974 int video_pipe, i, v_urb_len;
975
976 printk(KERN_DEBUG "go7007-usb: probing new GO7007 USB board\n");
977
978 switch (id->driver_info) {
979 case GO7007_BOARDID_MATRIX_II:
980 name = "WIS Matrix II or compatible";
981 board = &board_matrix_ii;
982 break;
983 case GO7007_BOARDID_MATRIX_RELOAD:
984 name = "WIS Matrix Reloaded or compatible";
985 board = &board_matrix_reload;
986 break;
987 case GO7007_BOARDID_MATRIX_REV:
988 name = "WIS Matrix Revolution or compatible";
989 board = &board_matrix_revolution;
990 break;
991 case GO7007_BOARDID_STAR_TREK:
992 name = "WIS Star Trek or compatible";
993 board = &board_star_trek;
994 break;
995 case GO7007_BOARDID_XMEN:
996 name = "WIS XMen or compatible";
997 board = &board_xmen;
998 break;
999 case GO7007_BOARDID_XMEN_II:
1000 name = "WIS XMen II or compatible";
1001 board = &board_xmen;
1002 break;
1003 case GO7007_BOARDID_XMEN_III:
1004 name = "WIS XMen III or compatible";
1005 board = &board_xmen;
1006 break;
1007 case GO7007_BOARDID_PX_M402U:
1008 name = "Plextor PX-M402U";
1009 board = &board_matrix_ii;
1010 break;
1011 case GO7007_BOARDID_PX_TV402U_ANY:
1012 name = "Plextor PX-TV402U (unknown tuner)";
1013 board = &board_px_tv402u;
1014 break;
1015 case GO7007_BOARDID_LIFEVIEW_LR192:
1016 printk(KERN_ERR "go7007-usb: The Lifeview TV Walker Ultra "
1017 "is not supported. Sorry!\n");
1018 return 0;
1019 name = "Lifeview TV Walker Ultra";
1020 board = &board_lifeview_lr192;
1021 break;
1022 case GO7007_BOARDID_SENSORAY_2250:
1023 printk(KERN_INFO "Sensoray 2250 found\n");
1024 name = "Sensoray 2250/2251";
1025 board = &board_sensoray_2250;
1026 break;
1027 default:
1028 printk(KERN_ERR "go7007-usb: unknown board ID %d!\n",
1029 (unsigned int)id->driver_info);
1030 return 0;
1031 }
1032
1033 usb = kzalloc(sizeof(struct go7007_usb), GFP_KERNEL);
1034 if (usb == NULL)
1035 return -ENOMEM;
1036
1037
1038 usb->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
1039 if (usb->intr_urb == NULL)
1040 goto allocfail;
1041 usb->intr_urb->transfer_buffer = kmalloc(2*sizeof(u16), GFP_KERNEL);
1042 if (usb->intr_urb->transfer_buffer == NULL)
1043 goto allocfail;
1044
1045 go = go7007_alloc(&board->main_info, &intf->dev);
1046 if (go == NULL)
1047 goto allocfail;
1048 usb->board = board;
1049 usb->usbdev = usbdev;
1050 go->board_id = id->driver_info;
1051 strncpy(go->name, name, sizeof(go->name));
1052 if (board->flags & GO7007_USB_EZUSB)
1053 go->hpi_ops = &go7007_usb_ezusb_hpi_ops;
1054 else
1055 go->hpi_ops = &go7007_usb_onboard_hpi_ops;
1056 go->hpi_context = usb;
1057 usb_fill_int_urb(usb->intr_urb, usb->usbdev,
1058 usb_rcvintpipe(usb->usbdev, 4),
1059 usb->intr_urb->transfer_buffer, 2*sizeof(u16),
1060 go7007_usb_readinterrupt_complete, go, 8);
1061 usb_set_intfdata(intf, &go->v4l2_dev);
1062
1063
1064 if (go7007_boot_encoder(go, go->board_info->flags &
1065 GO7007_BOARD_USE_ONBOARD_I2C) < 0)
1066 goto initfail;
1067
1068
1069 if (board->flags & GO7007_USB_EZUSB_I2C) {
1070 memcpy(&go->i2c_adapter, &go7007_usb_adap_templ,
1071 sizeof(go7007_usb_adap_templ));
1072 mutex_init(&usb->i2c_lock);
1073 go->i2c_adapter.dev.parent = go->dev;
1074 i2c_set_adapdata(&go->i2c_adapter, go);
1075 if (i2c_add_adapter(&go->i2c_adapter) < 0) {
1076 printk(KERN_ERR
1077 "go7007-usb: error: i2c_add_adapter failed\n");
1078 goto initfail;
1079 }
1080 go->i2c_adapter_online = 1;
1081 }
1082
1083
1084
1085
1086
1087
1088
1089 if ((go->board_id == GO7007_BOARDID_XMEN ||
1090 go->board_id == GO7007_BOARDID_XMEN_III) &&
1091 go->i2c_adapter_online) {
1092 union i2c_smbus_data data;
1093
1094
1095 i2c_smbus_xfer(&go->i2c_adapter, 0x21, I2C_CLIENT_SCCB,
1096 I2C_SMBUS_READ, 0x0A, I2C_SMBUS_BYTE_DATA, &data);
1097 if (data.byte != 0x76) {
1098 if (assume_endura) {
1099 go->board_id = GO7007_BOARDID_ENDURA;
1100 usb->board = board = &board_endura;
1101 go->board_info = &board->main_info;
1102 strncpy(go->name, "Pelco Endura",
1103 sizeof(go->name));
1104 } else {
1105 u16 channel;
1106
1107
1108 go7007_write_addr(go, 0x3c82, 0x0000);
1109 go7007_write_addr(go, 0x3c80, 0x00df);
1110
1111 go7007_read_addr(go, 0x3c81, &channel);
1112 channel &= 0x3;
1113 go->board_id = GO7007_BOARDID_ADLINK_MPG24;
1114 usb->board = board = &board_adlink_mpg24;
1115 go->board_info = &board->main_info;
1116 go->channel_number = channel;
1117 snprintf(go->name, sizeof(go->name),
1118 "Adlink PCI-MPG24, channel #%d",
1119 channel);
1120 }
1121 }
1122 }
1123
1124
1125 if (go->board_id == GO7007_BOARDID_PX_TV402U_ANY) {
1126 u8 data[3];
1127
1128
1129 if (go7007_usb_vendor_request(go, 0x41, 0, 0, data, 3, 1) < 0) {
1130 printk(KERN_ERR "go7007-usb: GPIO read failed!\n");
1131 goto initfail;
1132 }
1133 switch (data[0] >> 6) {
1134 case 1:
1135 go->board_id = GO7007_BOARDID_PX_TV402U_EU;
1136 go->tuner_type = TUNER_SONY_BTF_PG472Z;
1137 strncpy(go->name, "Plextor PX-TV402U-EU",
1138 sizeof(go->name));
1139 break;
1140 case 2:
1141 go->board_id = GO7007_BOARDID_PX_TV402U_JP;
1142 go->tuner_type = TUNER_SONY_BTF_PK467Z;
1143 strncpy(go->name, "Plextor PX-TV402U-JP",
1144 sizeof(go->name));
1145 break;
1146 case 3:
1147 go->board_id = GO7007_BOARDID_PX_TV402U_NA;
1148 go->tuner_type = TUNER_SONY_BTF_PB463Z;
1149 strncpy(go->name, "Plextor PX-TV402U-NA",
1150 sizeof(go->name));
1151 break;
1152 default:
1153 printk(KERN_DEBUG "go7007-usb: unable to detect "
1154 "tuner type!\n");
1155 break;
1156 }
1157
1158
1159 if (go7007_usb_vendor_request(go, 0x40, 0x7f02, 0,
1160 NULL, 0, 0) < 0) {
1161 printk(KERN_ERR "go7007-usb: GPIO write failed!\n");
1162 goto initfail;
1163 }
1164 }
1165
1166
1167
1168 if ((board->flags & GO7007_USB_EZUSB) &&
1169 usbdev->speed != USB_SPEED_HIGH)
1170 printk(KERN_ERR "go7007-usb: *** WARNING *** This device "
1171 "must be connected to a USB 2.0 port! "
1172 "Attempting to capture video through a USB 1.1 "
1173 "port will result in stream corruption, even "
1174 "at low bitrates!\n");
1175
1176
1177
1178 if (go7007_register_encoder(go) < 0)
1179 goto initfail;
1180
1181
1182 if (board->flags & GO7007_USB_EZUSB) {
1183 v_urb_len = 1024;
1184 video_pipe = usb_rcvbulkpipe(usb->usbdev, 6);
1185 } else {
1186 v_urb_len = 512;
1187 video_pipe = usb_rcvbulkpipe(usb->usbdev, 1);
1188 }
1189 for (i = 0; i < 8; ++i) {
1190 usb->video_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
1191 if (usb->video_urbs[i] == NULL)
1192 goto initfail;
1193 usb->video_urbs[i]->transfer_buffer =
1194 kmalloc(v_urb_len, GFP_KERNEL);
1195 if (usb->video_urbs[i]->transfer_buffer == NULL)
1196 goto initfail;
1197 usb_fill_bulk_urb(usb->video_urbs[i], usb->usbdev, video_pipe,
1198 usb->video_urbs[i]->transfer_buffer, v_urb_len,
1199 go7007_usb_read_video_pipe_complete, go);
1200 }
1201
1202
1203 if ((board->flags & GO7007_USB_EZUSB) && go->audio_enabled)
1204 for (i = 0; i < 8; ++i) {
1205 usb->audio_urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
1206 if (usb->audio_urbs[i] == NULL)
1207 goto initfail;
1208 usb->audio_urbs[i]->transfer_buffer = kmalloc(4096,
1209 GFP_KERNEL);
1210 if (usb->audio_urbs[i]->transfer_buffer == NULL)
1211 goto initfail;
1212 usb_fill_bulk_urb(usb->audio_urbs[i], usb->usbdev,
1213 usb_rcvbulkpipe(usb->usbdev, 8),
1214 usb->audio_urbs[i]->transfer_buffer, 4096,
1215 go7007_usb_read_audio_pipe_complete, go);
1216 }
1217
1218
1219 go->status = STATUS_ONLINE;
1220 return 0;
1221
1222initfail:
1223 go->status = STATUS_SHUTDOWN;
1224 return 0;
1225
1226allocfail:
1227 if (usb->intr_urb) {
1228 kfree(usb->intr_urb->transfer_buffer);
1229 usb_free_urb(usb->intr_urb);
1230 }
1231 kfree(usb);
1232 return -ENOMEM;
1233}
1234
1235static void go7007_usb_disconnect(struct usb_interface *intf)
1236{
1237 struct go7007 *go = to_go7007(usb_get_intfdata(intf));
1238 struct go7007_usb *usb = go->hpi_context;
1239 struct urb *vurb, *aurb;
1240 int i;
1241
1242 go->status = STATUS_SHUTDOWN;
1243 usb_kill_urb(usb->intr_urb);
1244
1245
1246 for (i = 0; i < 8; ++i) {
1247 vurb = usb->video_urbs[i];
1248 if (vurb) {
1249 usb_kill_urb(vurb);
1250 if (vurb->transfer_buffer)
1251 kfree(vurb->transfer_buffer);
1252 usb_free_urb(vurb);
1253 }
1254 aurb = usb->audio_urbs[i];
1255 if (aurb) {
1256 usb_kill_urb(aurb);
1257 if (aurb->transfer_buffer)
1258 kfree(aurb->transfer_buffer);
1259 usb_free_urb(aurb);
1260 }
1261 }
1262 kfree(usb->intr_urb->transfer_buffer);
1263 usb_free_urb(usb->intr_urb);
1264
1265 kfree(go->hpi_context);
1266
1267 go7007_remove(go);
1268}
1269
1270static struct usb_driver go7007_usb_driver = {
1271 .name = "go7007",
1272 .probe = go7007_usb_probe,
1273 .disconnect = go7007_usb_disconnect,
1274 .id_table = go7007_usb_id_table,
1275};
1276
1277static int __init go7007_usb_init(void)
1278{
1279 return usb_register(&go7007_usb_driver);
1280}
1281
1282static void __exit go7007_usb_cleanup(void)
1283{
1284 usb_deregister(&go7007_usb_driver);
1285}
1286
1287module_init(go7007_usb_init);
1288module_exit(go7007_usb_cleanup);
1289
1290MODULE_LICENSE("GPL v2");
1291
