/*
   This is part of rtl8187 OpenSource driver.
   Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
   Released under the terms of GPL (General Public Licence)

   Parts of this driver are based on the GPL part of the
   official realtek driver

   Parts of this driver are based on the rtl8192 driver skeleton
   from Patric Schenke & Andres Salomon

   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver

   We want to tanks the Authors of those projects and the Ndiswrapper
   project Authors.
*/

#ifndef R819xU_H
#define R819xU_H

#include <linux/module.h>
#include <linux/kernel.h>
//#include <linux/config.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
//#include <linux/usb.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/rtnetlink.h>    //for rtnl_lock()
#include <linux/wireless.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>      // Necessary because we use the proc fs
#include <linux/if_arp.h>
#include <linux/random.h>
#include <linux/version.h>
#include <asm/io.h>
#include "ieee80211/ieee80211.h"




#define RTL819xE_MODULE_NAME "rtl819xE"
//added for HW security, john.0629
#define FALSE 0
#define TRUE 1
#define MAX_KEY_LEN     61
#define KEY_BUF_SIZE    5

#define BIT0            0x00000001
#define BIT1            0x00000002
#define BIT2            0x00000004
#define BIT3            0x00000008
#define BIT4            0x00000010
#define BIT5            0x00000020
#define BIT6            0x00000040
#define BIT7            0x00000080
#define BIT8            0x00000100
#define BIT9            0x00000200
#define BIT10           0x00000400
#define BIT11           0x00000800
#define BIT12           0x00001000
#define BIT13           0x00002000
#define BIT14           0x00004000
#define BIT15           0x00008000
#define BIT16           0x00010000
#define BIT17           0x00020000
#define BIT18           0x00040000
#define BIT19           0x00080000
#define BIT20           0x00100000
#define BIT21           0x00200000
#define BIT22           0x00400000
#define BIT23           0x00800000
#define BIT24           0x01000000
#define BIT25           0x02000000
#define BIT26           0x04000000
#define BIT27           0x08000000
#define BIT28           0x10000000
#define BIT29           0x20000000
#define BIT30           0x40000000
#define BIT31           0x80000000
// Rx smooth factor
#define Rx_Smooth_Factor                20
/* 2007/06/04 MH Define sliding window for RSSI history. */
#define         PHY_RSSI_SLID_WIN_MAX                           100
#define         PHY_Beacon_RSSI_SLID_WIN_MAX            10

#define IC_VersionCut_D 0x3
#define IC_VersionCut_E 0x4

#if 0 //we need to use RT_TRACE instead DMESG as RT_TRACE will clearly show debug level wb.
#define DMESG(x,a...) printk(KERN_INFO RTL819xE_MODULE_NAME ": " x "\n", ## a)
#define DMESGW(x,a...) printk(KERN_WARNING RTL819xE_MODULE_NAME ": WW:" x "\n", ## a)
#define DMESGE(x,a...) printk(KERN_WARNING RTL819xE_MODULE_NAME ": EE:" x "\n", ## a)
#else
#define DMESG(x,a...)
#define DMESGW(x,a...)
#define DMESGE(x,a...)
extern u32 rt_global_debug_component;
#define RT_TRACE(component, x, args...) \
do { if(rt_global_debug_component & component) \
        printk(KERN_DEBUG RTL819xE_MODULE_NAME ":" x "\n" , \
               ##args);\
}while(0);

#define COMP_TRACE                              BIT0            // For function call tracing.
#define COMP_DBG                                BIT1            // Only for temporary debug message.
#define COMP_INIT                               BIT2            // during driver initialization / halt / reset.


#define COMP_RECV                               BIT3            // Reveive part data path.
#define COMP_SEND                               BIT4            // Send part path.
#define COMP_IO                                 BIT5            // I/O Related. Added by Annie, 2006-03-02.
#define COMP_POWER                              BIT6            // 802.11 Power Save mode or System/Device Power state related.
#define COMP_EPROM                              BIT7            // 802.11 link related: join/start BSS, leave BSS.
#define COMP_SWBW                               BIT8    // For bandwidth switch.
#define COMP_SEC                                BIT9// For Security.


#define COMP_TURBO                              BIT10   // For Turbo Mode related. By Annie, 2005-10-21.
#define COMP_QOS                                BIT11   // For QoS.

#define COMP_RATE                               BIT12   // For Rate Adaptive mechanism, 2006.07.02, by rcnjko. #define COMP_EVENTS                              0x00000080      // Event handling
#define COMP_RXDESC                             BIT13   // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
#define COMP_PHY                                BIT14
#define COMP_DIG                                BIT15   // For DIG, 2006.09.25, by rcnjko.
#define COMP_TXAGC                              BIT16   // For Tx power, 060928, by rcnjko.
#define COMP_HALDM                              BIT17   // For HW Dynamic Mechanism, 061010, by rcnjko.
#define COMP_POWER_TRACKING                     BIT18   //FOR 8190 TX POWER TRACKING
#define COMP_EVENTS                             BIT19   // Event handling

#define COMP_RF                                 BIT20   // For RF.
//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
//1!!!!!!!!!!!!!!!!!!!!!!!!!!!

#define COMP_FIRMWARE                           BIT21   //for firmware downloading
#define COMP_HT                                 BIT22   // For 802.11n HT related information. by Emily 2006-8-11

#define COMP_RESET                              BIT23
#define COMP_CMDPKT                             BIT24
#define COMP_SCAN                               BIT25
#define COMP_IPS                                BIT26
#define COMP_DOWN                               BIT27  // for rm driver module
#define COMP_INTR                               BIT28  // for interrupt
#define COMP_ERR                                BIT31  // for error out, always on
#endif

#define RTL819x_DEBUG
#ifdef RTL819x_DEBUG
#define assert(expr) \
        if (!(expr)) {                                  \
                printk( "Assertion failed! %s,%s,%s,line=%d\n", \
                #expr,__FILE__,__FUNCTION__,__LINE__);          \
        }
//wb added to debug out data buf
//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
#define RT_DEBUG_DATA(level, data, datalen)      \
        do{ if ((rt_global_debug_component & (level)) == (level))   \
                {       \
                        int i;                                  \
                        u8* pdata = (u8*) data;                 \
                        printk(KERN_DEBUG RTL819xE_MODULE_NAME ": %s()\n", __FUNCTION__);   \
                        for(i=0; i<(int)(datalen); i++)                 \
                        {                                               \
                                printk("%2x ", pdata[i]);               \
                                if ((i+1)%16 == 0) printk("\n");        \
                        }                               \
                        printk("\n");                   \
                }                                       \
        } while (0)
#else
#define assert(expr) do {} while (0)
#define RT_DEBUG_DATA(level, data, datalen) do {} while(0)
#endif /* RTL8169_DEBUG */


//
// Queue Select Value in TxDesc
//
#define QSLT_BK                                 0x1
#define QSLT_BE                                 0x0
#define QSLT_VI                                 0x4
#define QSLT_VO                                 0x6
#define QSLT_BEACON                             0x10
#define QSLT_HIGH                               0x11
#define QSLT_MGNT                               0x12
#define QSLT_CMD                                0x13

#define DESC90_RATE1M                           0x00
#define DESC90_RATE2M                           0x01
#define DESC90_RATE5_5M                         0x02
#define DESC90_RATE11M                          0x03
#define DESC90_RATE6M                           0x04
#define DESC90_RATE9M                           0x05
#define DESC90_RATE12M                          0x06
#define DESC90_RATE18M                          0x07
#define DESC90_RATE24M                          0x08
#define DESC90_RATE36M                          0x09
#define DESC90_RATE48M                          0x0a
#define DESC90_RATE54M                          0x0b
#define DESC90_RATEMCS0                         0x00
#define DESC90_RATEMCS1                         0x01
#define DESC90_RATEMCS2                         0x02
#define DESC90_RATEMCS3                         0x03
#define DESC90_RATEMCS4                         0x04
#define DESC90_RATEMCS5                         0x05
#define DESC90_RATEMCS6                         0x06
#define DESC90_RATEMCS7                         0x07
#define DESC90_RATEMCS8                         0x08
#define DESC90_RATEMCS9                         0x09
#define DESC90_RATEMCS10                        0x0a
#define DESC90_RATEMCS11                        0x0b
#define DESC90_RATEMCS12                        0x0c
#define DESC90_RATEMCS13                        0x0d
#define DESC90_RATEMCS14                        0x0e
#define DESC90_RATEMCS15                        0x0f
#define DESC90_RATEMCS32                        0x20

#define RTL819X_DEFAULT_RF_TYPE RF_1T2R
#define EEPROM_Default_LegacyHTTxPowerDiff      0x4
#define IEEE80211_WATCH_DOG_TIME    2000

/* For rtl819x */
typedef struct _tx_desc_819x_pci {
        //DWORD 0
        u16     PktSize;
        u8      Offset;
        u8      Reserved1:3;
        u8      CmdInit:1;
        u8      LastSeg:1;
        u8      FirstSeg:1;
        u8      LINIP:1;
        u8      OWN:1;

        //DWORD 1
        u8      TxFWInfoSize;
        u8      RATid:3;
        u8      DISFB:1;
        u8      USERATE:1;
        u8      MOREFRAG:1;
        u8      NoEnc:1;
        u8      PIFS:1;
        u8      QueueSelect:5;
        u8      NoACM:1;
        u8      Resv:2;
        u8      SecCAMID:5;
        u8      SecDescAssign:1;
        u8      SecType:2;

        //DWORD 2
        u16     TxBufferSize;
        u8      PktId:7;
        u8      Resv1:1;
        u8      Reserved2;

        //DWORD 3
        u32     TxBuffAddr;

        //DWORD 4
        u32     NextDescAddress;

        //DWORD 5,6,7
        u32     Reserved5;
        u32     Reserved6;
        u32     Reserved7;
}tx_desc_819x_pci, *ptx_desc_819x_pci;


typedef struct _tx_desc_cmd_819x_pci {
        //DWORD 0
        u16     PktSize;
        u8      Reserved1;
        u8      CmdType:3;
        u8      CmdInit:1;
        u8      LastSeg:1;
        u8      FirstSeg:1;
        u8      LINIP:1;
        u8      OWN:1;

        //DOWRD 1
        u16     ElementReport;
        u16     Reserved2;

        //DOWRD 2
        u16     TxBufferSize;
        u16     Reserved3;

       //DWORD 3,4,5
        u32     TxBufferAddr;
        u32     NextDescAddress;
        u32     Reserved4;
        u32     Reserved5;
        u32     Reserved6;
}tx_desc_cmd_819x_pci, *ptx_desc_cmd_819x_pci;


typedef struct _tx_fwinfo_819x_pci {
        //DOWRD 0
        u8              TxRate:7;
        u8              CtsEnable:1;
        u8              RtsRate:7;
        u8              RtsEnable:1;
        u8              TxHT:1;
        u8              Short:1;                //Short PLCP for CCK, or short GI for 11n MCS
        u8              TxBandwidth:1;          // This is used for HT MCS rate only.
        u8              TxSubCarrier:2;         // This is used for legacy OFDM rate only.
        u8              STBC:2;
        u8              AllowAggregation:1;
        u8              RtsHT:1;                //Interpre RtsRate field as high throughput data rate
        u8              RtsShort:1;             //Short PLCP for CCK, or short GI for 11n MCS
        u8              RtsBandwidth:1;         // This is used for HT MCS rate only.
        u8              RtsSubcarrier:2;        // This is used for legacy OFDM rate only.
        u8              RtsSTBC:2;
        u8              EnableCPUDur:1;         //Enable firmware to recalculate and assign packet duration

        //DWORD 1
        u8              RxMF:2;
        u8              RxAMD:3;
        u8              Reserved1:3;
        u8              Reserved2;
        u8              Reserved3;
        u8              Reserved4;

        //u32                Reserved;
}tx_fwinfo_819x_pci, *ptx_fwinfo_819x_pci;

typedef struct rtl8192_rx_info {
        struct urb *urb;
        struct net_device *dev;
        u8 out_pipe;
}rtl8192_rx_info ;
typedef struct _rx_desc_819x_pci{
        //DOWRD 0
        u16                     Length:14;
        u16                     CRC32:1;
        u16                     ICV:1;
        u8                      RxDrvInfoSize;
        u8                      Shift:2;
        u8                      PHYStatus:1;
        u8                      SWDec:1;
        u8                                      LastSeg:1;
        u8                                      FirstSeg:1;
        u8                                      EOR:1;
        u8                                      OWN:1;

        //DWORD 1
        u32                     Reserved2;

        //DWORD 2
        u32                     Reserved3;

        //DWORD 3
        u32     BufferAddress;

}rx_desc_819x_pci, *prx_desc_819x_pci;

typedef struct _rx_fwinfo_819x_pci{
        //DWORD 0
        u16                     Reserved1:12;
        u16                     PartAggr:1;
        u16                     FirstAGGR:1;
        u16                     Reserved2:2;

        u8                      RxRate:7;
        u8                      RxHT:1;

        u8                      BW:1;
        u8                      SPLCP:1;
        u8                      Reserved3:2;
        u8                      PAM:1;
        u8                      Mcast:1;
        u8                      Bcast:1;
        u8                      Reserved4:1;

        //DWORD 1
        u32                     TSFL;

}rx_fwinfo_819x_pci, *prx_fwinfo_819x_pci;

#define MAX_DEV_ADDR_SIZE               8  /* support till 64 bit bus width OS */
#define MAX_FIRMWARE_INFORMATION_SIZE   32 /*2006/04/30 by Emily forRTL8190*/
#define MAX_802_11_HEADER_LENGTH        (40 + MAX_FIRMWARE_INFORMATION_SIZE)
#define ENCRYPTION_MAX_OVERHEAD         128
//#define       USB_HWDESC_HEADER_LEN           sizeof(tx_desc_819x_usb)
//#define TX_PACKET_SHIFT_BYTES                 (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
#define MAX_FRAGMENT_COUNT              8
#define MAX_TRANSMIT_BUFFER_SIZE        (1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)

#define scrclng                                 4               // octets for crc32 (FCS, ICV)
/* 8190 Loopback Mode definition */
typedef enum _rtl819x_loopback{
        RTL819X_NO_LOOPBACK = 0,
        RTL819X_MAC_LOOPBACK = 1,
        RTL819X_DMA_LOOPBACK = 2,
        RTL819X_CCK_LOOPBACK = 3,
}rtl819x_loopback_e;

/* due to rtl8192 firmware */
typedef enum _desc_packet_type_e{
        DESC_PACKET_TYPE_INIT = 0,
        DESC_PACKET_TYPE_NORMAL = 1,
}desc_packet_type_e;

typedef enum _firmware_source{
        FW_SOURCE_IMG_FILE = 0,
        FW_SOURCE_HEADER_FILE = 1,              //from header file
}firmware_source_e, *pfirmware_source_e;

typedef enum _firmware_status{
        FW_STATUS_0_INIT = 0,
        FW_STATUS_1_MOVE_BOOT_CODE = 1,
        FW_STATUS_2_MOVE_MAIN_CODE = 2,
        FW_STATUS_3_TURNON_CPU = 3,
        FW_STATUS_4_MOVE_DATA_CODE = 4,
        FW_STATUS_5_READY = 5,
}firmware_status_e;

typedef struct _rt_firmare_seg_container {
        u16     seg_size;
        u8      *seg_ptr;
}fw_seg_container, *pfw_seg_container;

typedef struct _rt_firmware{
        firmware_status_e firmware_status;
        u16               cmdpacket_frag_thresold;
#define RTL8190_MAX_FIRMWARE_CODE_SIZE  64000   //64k
#define MAX_FW_INIT_STEP                3
        u8                firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
        u16               firmware_buf_size[MAX_FW_INIT_STEP];
}rt_firmware, *prt_firmware;
//+by amy 080507
#define MAX_RECEIVE_BUFFER_SIZE 9100    // Add this to 9100 bytes to receive A-MSDU from RT-AP

/* Firmware Queue Layout */
#define NUM_OF_FIRMWARE_QUEUE           10
#define NUM_OF_PAGES_IN_FW              0x100
#define NUM_OF_PAGE_IN_FW_QUEUE_BE      0x0aa
#define NUM_OF_PAGE_IN_FW_QUEUE_BK      0x007
#define NUM_OF_PAGE_IN_FW_QUEUE_VI      0x024
#define NUM_OF_PAGE_IN_FW_QUEUE_VO      0x007
#define NUM_OF_PAGE_IN_FW_QUEUE_HCCA    0
#define NUM_OF_PAGE_IN_FW_QUEUE_CMD     0x2
#define NUM_OF_PAGE_IN_FW_QUEUE_MGNT    0x10
#define NUM_OF_PAGE_IN_FW_QUEUE_HIGH    0
#define NUM_OF_PAGE_IN_FW_QUEUE_BCN     0x4
#define NUM_OF_PAGE_IN_FW_QUEUE_PUB     0xd
#define APPLIED_RESERVED_QUEUE_IN_FW    0x80000000
#define RSVD_FW_QUEUE_PAGE_BK_SHIFT     0x00
#define RSVD_FW_QUEUE_PAGE_BE_SHIFT     0x08
#define RSVD_FW_QUEUE_PAGE_VI_SHIFT     0x10
#define RSVD_FW_QUEUE_PAGE_VO_SHIFT     0x18
#define RSVD_FW_QUEUE_PAGE_MGNT_SHIFT   0x10
#define RSVD_FW_QUEUE_PAGE_CMD_SHIFT    0x08
#define RSVD_FW_QUEUE_PAGE_BCN_SHIFT    0x00
#define RSVD_FW_QUEUE_PAGE_PUB_SHIFT    0x08

//8187B Security
//#define RWCAM                   0xA0                    // Software read/write CAM config
//#define WCAMI                   0xA4                    // Software write CAM input content
//#define RCAMO                   0xA8                    // Output value from CAM according to 0xa0 setting
#define DCAM                    0xAC                    // Debug CAM Interface
#define AESMSK_FC               0xB2    // AES Mask register for frame control (0xB2~0xB3). Added by Annie, 2006-03-06.


#define CAM_CONTENT_COUNT       8
//#define CFG_DEFAULT_KEY         BIT5
#define CFG_VALID               BIT15
#if 0
//----------------------------------------------------------------------------
//       8187B WPA Config Register (offset 0xb0, 1 byte)
//----------------------------------------------------------------------------
#define SCR_UseDK                       0x01
#define SCR_TxSecEnable                 0x02
#define SCR_RxSecEnable                 0x04

//----------------------------------------------------------------------------
//       8187B CAM Config Setting (offset 0xb0, 1 byte)
//----------------------------------------------------------------------------
#define CAM_VALID                               0x8000
#define CAM_NOTVALID                    0x0000
#define CAM_USEDK                               0x0020


#define CAM_NONE                                0x0
#define CAM_WEP40                               0x01
#define CAM_TKIP                                0x02
#define CAM_AES                                 0x04
#define CAM_WEP104                              0x05

//#define CAM_SIZE                              16
#define TOTAL_CAM_ENTRY         16
#define CAM_ENTRY_LEN_IN_DW     6       // 6, unit: in u4byte. Added by Annie, 2006-05-25.
#define CAM_ENTRY_LEN_IN_BYTE   (CAM_ENTRY_LEN_IN_DW*sizeof(u32))    // 24, unit: in u1byte. Added by Annie, 2006-05-25.

#define CAM_CONFIG_USEDK                1
#define CAM_CONFIG_NO_USEDK             0

#define CAM_WRITE                               0x00010000
#define CAM_READ                                0x00000000
#define CAM_POLLINIG                    0x80000000

//=================================================================
//=================================================================

#endif
#define EPROM_93c46 0
#define EPROM_93c56 1

#define DEFAULT_FRAG_THRESHOLD 2342U
#define MIN_FRAG_THRESHOLD     256U
#define DEFAULT_BEACONINTERVAL 0x64U
#define DEFAULT_BEACON_ESSID "Rtl819xU"

#define DEFAULT_SSID ""
#define DEFAULT_RETRY_RTS 7
#define DEFAULT_RETRY_DATA 7
#define PRISM_HDR_SIZE 64

#define         PHY_RSSI_SLID_WIN_MAX                           100


typedef enum _WIRELESS_MODE {
        WIRELESS_MODE_UNKNOWN = 0x00,
        WIRELESS_MODE_A = 0x01,
        WIRELESS_MODE_B = 0x02,
        WIRELESS_MODE_G = 0x04,
        WIRELESS_MODE_AUTO = 0x08,
        WIRELESS_MODE_N_24G = 0x10,
        WIRELESS_MODE_N_5G = 0x20
} WIRELESS_MODE;

#define RTL_IOCTL_WPA_SUPPLICANT                SIOCIWFIRSTPRIV+30

typedef struct buffer
{
        struct buffer *next;
        u32 *buf;
        dma_addr_t dma;

} buffer;

typedef struct rtl_reg_debug{
        unsigned int  cmd;
        struct {
                unsigned char type;
                unsigned char addr;
                unsigned char page;
                unsigned char length;
        } head;
        unsigned char buf[0xff];
}rtl_reg_debug;

#if 0

typedef struct tx_pendingbuf
{
        struct ieee80211_txb *txb;
        short ispending;
        short descfrag;
} tx_pendigbuf;

#endif

typedef struct _rt_9x_tx_rate_history {
        u32             cck[4];
        u32             ofdm[8];
        // HT_MCS[0][]: BW=0 SG=0
        // HT_MCS[1][]: BW=1 SG=0
        // HT_MCS[2][]: BW=0 SG=1
        // HT_MCS[3][]: BW=1 SG=1
        u32             ht_mcs[4][16];
}rt_tx_rahis_t, *prt_tx_rahis_t;

typedef struct _RT_SMOOTH_DATA_4RF {
        char    elements[4][100];//array to store values
        u32     index;                  //index to current array to store
        u32     TotalNum;               //num of valid elements
        u32     TotalVal[4];            //sum of valid elements
}RT_SMOOTH_DATA_4RF, *PRT_SMOOTH_DATA_4RF;

typedef enum _tag_TxCmd_Config_Index{
        TXCMD_TXRA_HISTORY_CTRL                         = 0xFF900000,
        TXCMD_RESET_TX_PKT_BUFF                         = 0xFF900001,
        TXCMD_RESET_RX_PKT_BUFF                         = 0xFF900002,
        TXCMD_SET_TX_DURATION                           = 0xFF900003,
        TXCMD_SET_RX_RSSI                                               = 0xFF900004,
        TXCMD_SET_TX_PWR_TRACKING                       = 0xFF900005,
        TXCMD_XXXX_CTRL,
}DCMD_TXCMD_OP;

typedef struct Stats
{
        unsigned long txrdu;
        unsigned long rxrdu;
        //unsigned long rxnolast;
        //unsigned long rxnodata;
//      unsigned long rxreset;
//      unsigned long rxnopointer;
        unsigned long rxok;
        unsigned long rxframgment;
        unsigned long rxcmdpkt[4];              //08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query
        unsigned long rxurberr;
        unsigned long rxstaterr;
        unsigned long rxcrcerrmin;//crc error (0-500)
        unsigned long rxcrcerrmid;//crc error (500-1000)
        unsigned long rxcrcerrmax;//crc error (>1000)
        unsigned long received_rate_histogram[4][32];   //0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa
        unsigned long received_preamble_GI[2][32];              //0: Long preamble/GI, 1:Short preamble/GI
        unsigned long   rx_AMPDUsize_histogram[5]; // level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K)
        unsigned long rx_AMPDUnum_histogram[5]; // level: (<5), (5~10), (10~20), (20~40), (>40)
        unsigned long numpacket_matchbssid;     // debug use only.
        unsigned long numpacket_toself;         // debug use only.
        unsigned long num_process_phyinfo;              // debug use only.
        unsigned long numqry_phystatus;
        unsigned long numqry_phystatusCCK;
        unsigned long numqry_phystatusHT;
        unsigned long received_bwtype[5];              //0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate
        unsigned long txnperr;
        unsigned long txnpdrop;
        unsigned long txresumed;
//      unsigned long rxerr;
        unsigned long rxoverflow;
        unsigned long rxint;
        unsigned long txnpokint;
//      unsigned long txhpokint;
//      unsigned long txhperr;
        unsigned long ints;
        unsigned long shints;
        unsigned long txoverflow;
//      unsigned long rxdmafail;
//      unsigned long txbeacon;
//      unsigned long txbeaconerr;
        unsigned long txlpokint;
        unsigned long txlpdrop;
        unsigned long txlperr;
        unsigned long txbeokint;
        unsigned long txbedrop;
        unsigned long txbeerr;
        unsigned long txbkokint;
        unsigned long txbkdrop;
        unsigned long txbkerr;
        unsigned long txviokint;
        unsigned long txvidrop;
        unsigned long txvierr;
        unsigned long txvookint;
        unsigned long txvodrop;
        unsigned long txvoerr;
        unsigned long txbeaconokint;
        unsigned long txbeacondrop;
        unsigned long txbeaconerr;
        unsigned long txmanageokint;
        unsigned long txmanagedrop;
        unsigned long txmanageerr;
        unsigned long txcmdpktokint;
        unsigned long txdatapkt;
        unsigned long txfeedback;
        unsigned long txfeedbackok;
        unsigned long txoktotal;
        unsigned long txokbytestotal;
        unsigned long txokinperiod;
        unsigned long txmulticast;
        unsigned long txbytesmulticast;
        unsigned long txbroadcast;
        unsigned long txbytesbroadcast;
        unsigned long txunicast;
        unsigned long txbytesunicast;
        unsigned long rxbytesunicast;
        unsigned long txfeedbackfail;
        unsigned long txerrtotal;
        unsigned long txerrbytestotal;
        unsigned long txerrmulticast;
        unsigned long txerrbroadcast;
        unsigned long txerrunicast;
        unsigned long txretrycount;
        unsigned long txfeedbackretry;
        u8                      last_packet_rate;
        unsigned long slide_signal_strength[100];
        unsigned long slide_evm[100];
        unsigned long   slide_rssi_total;       // For recording sliding window's RSSI value
        unsigned long slide_evm_total;  // For recording sliding window's EVM value
        long signal_strength; // Transformed, in dbm. Beautified signal strength for UI, not correct.
        long signal_quality;
        long last_signal_strength_inpercent;
        long    recv_signal_power;      // Correct smoothed ss in Dbm, only used in driver to report real power now.
        u8 rx_rssi_percentage[4];
        u8 rx_evm_percentage[2];
        long rxSNRdB[4];
        rt_tx_rahis_t txrate;
        u32 Slide_Beacon_pwdb[100];     //cosa add for beacon rssi
        u32 Slide_Beacon_Total;         //cosa add for beacon rssi
        RT_SMOOTH_DATA_4RF              cck_adc_pwdb;
        u32     CurrentShowTxate;


} Stats;


// Bandwidth Offset
#define HAL_PRIME_CHNL_OFFSET_DONT_CARE         0
#define HAL_PRIME_CHNL_OFFSET_LOWER                     1
#define HAL_PRIME_CHNL_OFFSET_UPPER                     2

//+by amy 080507

typedef struct  ChnlAccessSetting {
        u16 SIFS_Timer;
        u16 DIFS_Timer;
        u16 SlotTimeTimer;
        u16 EIFS_Timer;
        u16 CWminIndex;
        u16 CWmaxIndex;
}*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING;

typedef struct _BB_REGISTER_DEFINITION{
        u32 rfintfs;                    // set software control: //             0x870~0x877[8 bytes]
        u32 rfintfi;                    // readback data: //            0x8e0~0x8e7[8 bytes]
        u32 rfintfo;                    // output data: //              0x860~0x86f [16 bytes]
        u32 rfintfe;                    // output enable: //            0x860~0x86f [16 bytes]
        u32 rf3wireOffset;              // LSSI data: //                0x840~0x84f [16 bytes]
        u32 rfLSSI_Select;              // BB Band Select: //           0x878~0x87f [8 bytes]
        u32 rfTxGainStage;              // Tx gain stage: //            0x80c~0x80f [4 bytes]
        u32 rfHSSIPara1;                // wire parameter control1 : //         0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
        u32 rfHSSIPara2;                // wire parameter control2 : //         0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
        u32 rfSwitchControl;    //Tx Rx antenna control : //            0x858~0x85f [16 bytes]
        u32 rfAGCControl1;      //AGC parameter control1 : //           0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
        u32 rfAGCControl2;      //AGC parameter control2 : //           0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
        u32 rfRxIQImbalance;    //OFDM Rx IQ imbalance matrix : //              0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
        u32 rfRxAFE;                    //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : //         0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
        u32 rfTxIQImbalance;    //OFDM Tx IQ imbalance matrix //                0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
        u32 rfTxAFE;                    //Tx IQ DC Offset and Tx DFIR type //           0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
        u32 rfLSSIReadBack;     //LSSI RF readback data //              0x8a0~0x8af [16 bytes]
}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;

typedef enum _RT_RF_TYPE_819xU{
        RF_TYPE_MIN = 0,
        RF_8225,
        RF_8256,
        RF_8258,
        RF_PSEUDO_11N = 4,
}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;


typedef struct _rate_adaptive
{
        u8                              rate_adaptive_disabled;
        u8                              ratr_state;
        u16                             reserve;

        u32                             high_rssi_thresh_for_ra;
        u32                             high2low_rssi_thresh_for_ra;
        u8                              low2high_rssi_thresh_for_ra40M;
        u32                             low_rssi_thresh_for_ra40M;
        u8                              low2high_rssi_thresh_for_ra20M;
        u32                             low_rssi_thresh_for_ra20M;
        u32                             upper_rssi_threshold_ratr;
        u32                             middle_rssi_threshold_ratr;
        u32                             low_rssi_threshold_ratr;
        u32                             low_rssi_threshold_ratr_40M;
        u32                             low_rssi_threshold_ratr_20M;
        u8                              ping_rssi_enable;       //cosa add for test
        u32                             ping_rssi_ratr; //cosa add for test
        u32                             ping_rssi_thresh_for_ra;//cosa add for test
        u32                             last_ratr;

} rate_adaptive, *prate_adaptive;
#define TxBBGainTableLength 37
#define CCKTxBBGainTableLength 23
typedef struct _txbbgain_struct
{
        long    txbb_iq_amplifygain;
        u32     txbbgain_value;
} txbbgain_struct, *ptxbbgain_struct;

typedef struct _ccktxbbgain_struct
{
        //The Value is from a22 to a29 one Byte one time is much Safer
        u8      ccktxbb_valuearray[8];
} ccktxbbgain_struct,*pccktxbbgain_struct;


typedef struct _init_gain
{
        u8                              xaagccore1;
        u8                              xbagccore1;
        u8                              xcagccore1;
        u8                              xdagccore1;
        u8                              cca;

} init_gain, *pinit_gain;

/* 2007/11/02 MH Define RF mode temporarily for test. */
typedef enum tag_Rf_Operatetion_State
{
    RF_STEP_INIT = 0,
    RF_STEP_NORMAL,
    RF_STEP_MAX
}RF_STEP_E;

typedef enum _RT_STATUS{
        RT_STATUS_SUCCESS,
        RT_STATUS_FAILURE,
        RT_STATUS_PENDING,
        RT_STATUS_RESOURCE
}RT_STATUS,*PRT_STATUS;

typedef enum _RT_CUSTOMER_ID
{
        RT_CID_DEFAULT = 0,
        RT_CID_8187_ALPHA0 = 1,
        RT_CID_8187_SERCOMM_PS = 2,
        RT_CID_8187_HW_LED = 3,
        RT_CID_8187_NETGEAR = 4,
        RT_CID_WHQL = 5,
        RT_CID_819x_CAMEO  = 6,
        RT_CID_819x_RUNTOP = 7,
        RT_CID_819x_Senao = 8,
        RT_CID_TOSHIBA = 9,     // Merge by Jacken, 2008/01/31.
        RT_CID_819x_Netcore = 10,
        RT_CID_Nettronix = 11,
        RT_CID_DLINK = 12,
        RT_CID_PRONET = 13,
        RT_CID_COREGA = 14,
}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;

//================================================================================
// LED customization.
//================================================================================

typedef enum _LED_STRATEGY_8190{
        SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
        SW_LED_MODE1, // SW control for PCI Express
        SW_LED_MODE2, // SW control for Cameo.
        SW_LED_MODE3, // SW contorl for RunTop.
        SW_LED_MODE4, // SW control for Netcore
        SW_LED_MODE5, //added by vivi, for led new mode, DLINK
        SW_LED_MODE6, //added by vivi, for led new mode, PRONET
        HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
}LED_STRATEGY_8190, *PLED_STRATEGY_8190;

#define CHANNEL_PLAN_LEN                                10

#define sCrcLng                 4

typedef struct _TX_FWINFO_STRUCUTRE{
        //DOWRD 0
        u8                      TxRate:7;
        u8                      CtsEnable:1;
        u8                      RtsRate:7;
        u8                      RtsEnable:1;
        u8                      TxHT:1;
        u8                      Short:1;
        u8                      TxBandwidth:1;
        u8                      TxSubCarrier:2;
        u8                      STBC:2;
        u8                      AllowAggregation:1;
        u8                      RtsHT:1;
        u8                      RtsShort:1;
        u8                      RtsBandwidth:1;
        u8                      RtsSubcarrier:2;
        u8                      RtsSTBC:2;
        u8                      EnableCPUDur:1;

        //DWORD 1
        u32                     RxMF:2;
        u32                     RxAMD:3;
        u32                     Reserved1:3;
        u32                     TxAGCOffset:4;
        u32                     TxAGCSign:1;
        u32                     Tx_INFO_RSVD:6;
        u32                     PacketID:13;
}TX_FWINFO_T;


typedef struct _TX_FWINFO_8190PCI{
        //DOWRD 0
        u8                      TxRate:7;
        u8                      CtsEnable:1;
        u8                      RtsRate:7;
        u8                      RtsEnable:1;
        u8                      TxHT:1;
        u8                      Short:1;                                                //Short PLCP for CCK, or short GI for 11n MCS
        u8                      TxBandwidth:1;                          // This is used for HT MCS rate only.
        u8                      TxSubCarrier:2;                         // This is used for legacy OFDM rate only.
        u8                      STBC:2;
        u8                      AllowAggregation:1;
        u8                      RtsHT:1;                                                //Interpre RtsRate field as high throughput data rate
        u8                      RtsShort:1;                             //Short PLCP for CCK, or short GI for 11n MCS
        u8                      RtsBandwidth:1;                         // This is used for HT MCS rate only.
        u8                      RtsSubcarrier:2;                                // This is used for legacy OFDM rate only.
        u8                      RtsSTBC:2;
        u8                      EnableCPUDur:1;                         //Enable firmware to recalculate and assign packet duration

        //DWORD 1
        u32                     RxMF:2;
        u32                     RxAMD:3;
        u32                     TxPerPktInfoFeedback:1;         // 1: indicate that the transimission info of this packet should be gathered by Firmware and retured by Rx Cmd.
        u32                     Reserved1:2;
        u32                     TxAGCOffset:4;          // Only 90 support
        u32                     TxAGCSign:1;            // Only 90 support
        u32                     RAW_TXD:1;                      // MAC will send data in txpktbuffer without any processing,such as CRC check
        u32                     Retry_Limit:4;          // CCX Support relative retry limit FW page only support 4 bits now.
        u32                     Reserved2:1;
        u32                     PacketID:13;

        // DW 2

}TX_FWINFO_8190PCI, *PTX_FWINFO_8190PCI;

typedef struct _phy_ofdm_rx_status_report_819xpci
{
        u8      trsw_gain_X[4];
        u8      pwdb_all;
        u8      cfosho_X[4];
        u8      cfotail_X[4];
        u8      rxevm_X[2];
        u8      rxsnr_X[4];
        u8      pdsnr_X[2];
        u8      csi_current_X[2];
        u8      csi_target_X[2];
        u8      sigevm;
        u8      max_ex_pwr;
        u8      sgi_en;
        u8      rxsc_sgien_exflg;
}phy_sts_ofdm_819xpci_t;

typedef struct _phy_cck_rx_status_report_819xpci
{
        /* For CCK rate descriptor. This is a unsigned 8:1 variable. LSB bit presend
           0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */
        u8      adc_pwdb_X[4];
        u8      sq_rpt;
        u8      cck_agc_rpt;
}phy_sts_cck_819xpci_t;

typedef struct _phy_ofdm_rx_status_rxsc_sgien_exintfflag{
        u8                      reserved:4;
        u8                      rxsc:2;
        u8                      sgi_en:1;
        u8                      ex_intf_flag:1;
}phy_ofdm_rx_status_rxsc_sgien_exintfflag;

typedef enum _RT_OP_MODE{
        RT_OP_MODE_AP,
        RT_OP_MODE_INFRASTRUCTURE,
        RT_OP_MODE_IBSS,
        RT_OP_MODE_NO_LINK,
}RT_OP_MODE, *PRT_OP_MODE;


/* 2007/11/02 MH Define RF mode temporarily for test. */
typedef enum tag_Rf_OpType
{
    RF_OP_By_SW_3wire = 0,
    RF_OP_By_FW,
    RF_OP_MAX
}RF_OpType_E;

typedef enum _RESET_TYPE {
        RESET_TYPE_NORESET = 0x00,
        RESET_TYPE_NORMAL = 0x01,
        RESET_TYPE_SILENT = 0x02
} RESET_TYPE;

typedef struct _tx_ring{
        u32 * desc;
        u8 nStuckCount;
        struct _tx_ring * next;
}__attribute__ ((packed)) tx_ring, * ptx_ring;

struct rtl8192_tx_ring {
    tx_desc_819x_pci *desc;
    dma_addr_t dma;
    unsigned int idx;
    unsigned int entries;
    struct sk_buff_head queue;
};

#define NIC_SEND_HANG_THRESHOLD_NORMAL          4
#define NIC_SEND_HANG_THRESHOLD_POWERSAVE       8
#define MAX_TX_QUEUE                            9       // BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON.

#define MAX_RX_COUNT                            64
#define MAX_TX_QUEUE_COUNT                      9

typedef struct r8192_priv
{
        struct pci_dev *pdev;
        //added for maintain info from eeprom
        short epromtype;
        u16 eeprom_vid;
        u16 eeprom_did;
        u8  eeprom_CustomerID;
        u16  eeprom_ChannelPlan;
        RT_CUSTOMER_ID CustomerID;
        LED_STRATEGY_8190       LedStrategy;

        //bool bDcut;
        u8      IC_Cut;
        int irq;
        short irq_enabled;
        struct ieee80211_device *ieee80211;
#ifdef ENABLE_LPS
        bool ps_force;
        bool force_lps;
        bool bdisable_nic;
#endif
        bool being_init_adapter;
        u8 Rf_Mode;
        short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
        u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
//      short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */
        short enable_gpio0;
        enum card_type {PCI,MINIPCI,CARDBUS,USB/*rtl8187*/}card_type;
        short hw_plcp_len;
        short plcp_preamble_mode;
        u8 ScanDelay;
        spinlock_t irq_lock;
        spinlock_t irq_th_lock;
        spinlock_t tx_lock;
        spinlock_t rf_ps_lock;
        struct mutex mutex;
        spinlock_t rf_lock; //used to lock rf write operation added by wb
        spinlock_t ps_lock;

        u32 irq_mask;
//      short irq_enabled;
//      struct net_device *dev; //comment this out.
        short chan;
        short sens;
        short max_sens;
        u32 rx_prevlen;
/*RX stuff*/
        rx_desc_819x_pci *rx_ring;
        dma_addr_t rx_ring_dma;
        unsigned int rx_idx;
        struct sk_buff *rx_buf[MAX_RX_COUNT];
        int rxringcount;
        u16 rxbuffersize;


        struct sk_buff *rx_skb;
        u32 *rxring;
        u32 *rxringtail;
        dma_addr_t rxringdma;
        struct buffer *rxbuffer;
        struct buffer *rxbufferhead;
        short rx_skb_complete;
/*TX stuff*/
        struct rtl8192_tx_ring tx_ring[MAX_TX_QUEUE_COUNT];
        int txringcount;
//{
        int txbuffsize;
        int txfwbuffersize;
        //struct tx_pendingbuf txnp_pending;
        //struct tasklet_struct irq_tx_tasklet;
        struct tasklet_struct irq_rx_tasklet;
        struct tasklet_struct irq_tx_tasklet;
        struct tasklet_struct irq_prepare_beacon_tasklet;
        struct buffer *txmapbufs;
        struct buffer *txbkpbufs;
        struct buffer *txbepbufs;
        struct buffer *txvipbufs;
        struct buffer *txvopbufs;
        struct buffer *txcmdbufs;
        struct buffer *txmapbufstail;
        struct buffer *txbkpbufstail;
        struct buffer *txbepbufstail;
        struct buffer *txvipbufstail;
        struct buffer *txvopbufstail;
        struct buffer *txcmdbufstail;
        /* adhoc/master mode stuff */
        ptx_ring txbeaconringtail;
        dma_addr_t txbeaconringdma;
        ptx_ring txbeaconring;
        int txbeaconcount;
        struct buffer *txbeaconbufs;
        struct buffer *txbeaconbufstail;
        ptx_ring txmapring;
        ptx_ring txbkpring;
        ptx_ring txbepring;
        ptx_ring txvipring;
        ptx_ring txvopring;
        ptx_ring txcmdring;
        ptx_ring txmapringtail;
        ptx_ring txbkpringtail;
        ptx_ring txbepringtail;
        ptx_ring txvipringtail;
        ptx_ring txvopringtail;
        ptx_ring txcmdringtail;
        ptx_ring txmapringhead;
        ptx_ring txbkpringhead;
        ptx_ring txbepringhead;
        ptx_ring txvipringhead;
        ptx_ring txvopringhead;
        ptx_ring txcmdringhead;
        dma_addr_t txmapringdma;
        dma_addr_t txbkpringdma;
        dma_addr_t txbepringdma;
        dma_addr_t txvipringdma;
        dma_addr_t txvopringdma;
        dma_addr_t txcmdringdma;
        //      u8 chtxpwr[15]; //channels from 1 to 14, 0 not used
//      u8 chtxpwr_ofdm[15]; //channels from 1 to 14, 0 not used
//      u8 cck_txpwr_base;
//      u8 ofdm_txpwr_base;
//      u8 challow[15]; //channels from 1 to 14, 0 not used
        short up;
        short crcmon; //if 1 allow bad crc frame reception in monitor mode
//      short prism_hdr;

//      struct timer_list scan_timer;
        /*short scanpending;
        short stopscan;*/
//      spinlock_t scan_lock;
//      u8 active_probe;
        //u8 active_scan_num;
        struct semaphore wx_sem;
        struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david
//      short hw_wep;

//      short digphy;
//      short antb;
//      short diversity;
//      u8 cs_treshold;
//      short rcr_csense;
        u8 rf_type; //0 means 1T2R, 1 means 2T4R
        RT_RF_TYPE_819xU rf_chip;

//      u32 key0[4];
        short (*rf_set_sens)(struct net_device *dev,short sens);
        u8 (*rf_set_chan)(struct net_device *dev,u8 ch);
        void (*rf_close)(struct net_device *dev);
        void (*rf_init)(struct net_device *dev);
        //short rate;
        short promisc;
        /*stats*/
        struct Stats stats;
        struct iw_statistics wstats;
        struct proc_dir_entry *dir_dev;

        /*RX stuff*/
//      u32 *rxring;
//      u32 *rxringtail;
//      dma_addr_t rxringdma;

#ifdef THOMAS_BEACON
        u32 *oldaddr;
#endif
#ifdef THOMAS_TASKLET
        atomic_t irt_counter;//count for irq_rx_tasklet
#endif
#ifdef JACKSON_NEW_RX
        struct sk_buff **pp_rxskb;
        int     rx_inx;
#endif

/* modified by davad for Rx process */
       struct sk_buff_head rx_queue;
       struct sk_buff_head skb_queue;
       struct work_struct qos_activate;
        short  tx_urb_index;
        atomic_t tx_pending[0x10];//UART_PRIORITY+1

        struct urb *rxurb_task;

        //2 Tx Related variables
        u16     ShortRetryLimit;
        u16     LongRetryLimit;
        u32     TransmitConfig;
        u8      RegCWinMin;             // For turbo mode CW adaptive. Added by Annie, 2005-10-27.

        u32     LastRxDescTSFHigh;
        u32     LastRxDescTSFLow;


        //2 Rx Related variables
        u16     EarlyRxThreshold;
        u32     ReceiveConfig;
        u8      AcmControl;

        u8      RFProgType;

        u8 retry_data;
        u8 retry_rts;
        u16 rts;

        struct  ChnlAccessSetting  ChannelAccessSetting;

        struct work_struct reset_wq;

/**********************************************************/
//for rtl819xPci
        // Data Rate Config. Added by Annie, 2006-04-13.
        u16     basic_rate;
        u8      short_preamble;
        u8      slot_time;
        u16 SifsTime;
/* WirelessMode*/
        u8 RegWirelessMode;
/*Firmware*/
        prt_firmware            pFirmware;
        rtl819x_loopback_e      LoopbackMode;
        firmware_source_e       firmware_source;
        bool AutoloadFailFlag;
        u16 EEPROMTxPowerDiff;
        u16 EEPROMAntPwDiff;            // Antenna gain offset from B/C/D to A
        u8 EEPROMThermalMeter;
        u8 EEPROMPwDiff;
        u8 EEPROMCrystalCap;
        u8 EEPROM_Def_Ver;
        u8 EEPROMTxPowerLevelCCK[14];// CCK channel 1~14
        // The following definition is for eeprom 93c56
        u8 EEPROMRfACCKChnl1TxPwLevel[3];       //RF-A CCK Tx Power Level at channel 7
        u8 EEPROMRfAOfdmChnlTxPwLevel[3];//RF-A CCK Tx Power Level at [0],[1],[2] = channel 1,7,13
        u8 EEPROMRfCCCKChnl1TxPwLevel[3];       //RF-C CCK Tx Power Level at channel 7
        u8 EEPROMRfCOfdmChnlTxPwLevel[3];//RF-C CCK Tx Power Level at [0],[1],[2] = channel 1,7,13
        u8 EEPROMTxPowerLevelCCK_V1[3];
        u8 EEPROMTxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14
        u8 EEPROMTxPowerLevelOFDM5G[24];        // OFDM 5G
        u8 EEPROMLegacyHTTxPowerDiff;   // Legacy to HT rate power diff
        bool bTXPowerDataReadFromEEPORM;
/*channel plan*/
        u16 RegChannelPlan; // Channel Plan specifed by user, 15: following setting of EEPROM, 0-14: default channel plan index specified by user.
        u16 ChannelPlan;
/*PS related*/
        bool RegRfOff;
        // Rf off action for power save
        u8      bHwRfOffAction; //0:No action, 1:By GPIO, 2:By Disable
/*PHY related*/
        BB_REGISTER_DEFINITION_T        PHYRegDef[4];   //Radio A/B/C/D
        // Read/write are allow for following hardware information variables
        u32     MCSTxPowerLevelOriginalOffset[6];
        u32     CCKTxPowerLevelOriginalOffset;
        u8      TxPowerLevelCCK[14];                    // CCK channel 1~14
        u8      TxPowerLevelCCK_A[14];                  // RF-A, CCK channel 1~14
        u8      TxPowerLevelCCK_C[14];
        u8      TxPowerLevelOFDM24G[14];                // OFDM 2.4G channel 1~14
        u8      TxPowerLevelOFDM5G[14];                 // OFDM 5G
        u8      TxPowerLevelOFDM24G_A[14];      // RF-A, OFDM 2.4G channel 1~14
        u8      TxPowerLevelOFDM24G_C[14];      // RF-C, OFDM 2.4G channel 1~14
        u8      LegacyHTTxPowerDiff;                    // Legacy to HT rate power diff
        u8      TxPowerDiff;
        char    RF_C_TxPwDiff;                                  // Antenna gain offset, rf-c to rf-a
        u8      AntennaTxPwDiff[3];                             // Antenna gain offset, index 0 for B, 1 for C, and 2 for D
        u8      CrystalCap;                                             // CrystalCap.
        u8      ThermalMeter[2];                                // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
        //05/27/2008 cck power enlarge
        u8      CckPwEnl;
        u16     TSSI_13dBm;
        u32     Pwr_Track;
        u8                              CCKPresentAttentuation_20Mdefault;
        u8                              CCKPresentAttentuation_40Mdefault;
        char                            CCKPresentAttentuation_difference;
        char                            CCKPresentAttentuation;
        // Use to calculate PWBD.
        u8      bCckHighPower;
        long    undecorated_smoothed_pwdb;
        long    undecorated_smoothed_cck_adc_pwdb[4];
        //for set channel
        u8      SwChnlInProgress;
        u8      SwChnlStage;
        u8      SwChnlStep;
        u8      SetBWModeInProgress;
        HT_CHANNEL_WIDTH                CurrentChannelBW;

        // 8190 40MHz mode
        //
        u8      nCur40MhzPrimeSC;       // Control channel sub-carrier
        // Joseph test for shorten RF configuration time.
        // We save RF reg0 in this variable to reduce RF reading.
        //
        u32                                     RfReg0Value[4];
        u8                                      NumTotalRFPath;
        bool                            brfpath_rxenable[4];
//+by amy 080507
        struct timer_list watch_dog_timer;

//+by amy 080515 for dynamic mechenism
        //Add by amy Tx Power Control for Near/Far Range 2008/05/15
        bool    bdynamic_txpower;  //bDynamicTxPower
        bool    bDynamicTxHighPower;  // Tx high power state
        bool    bDynamicTxLowPower;  // Tx low power state
        bool    bLastDTPFlag_High;
        bool    bLastDTPFlag_Low;

        bool    bstore_last_dtpflag;
        bool    bstart_txctrl_bydtp;   //Define to discriminate on High power State or on sitesuvey to change Tx gain index
        //Add by amy for Rate Adaptive
        rate_adaptive rate_adaptive;
        //Add by amy for TX power tracking
        //2008/05/15  Mars OPEN/CLOSE TX POWER TRACKING
       txbbgain_struct txbbgain_table[TxBBGainTableLength];
        u8                         txpower_count;//For 6 sec do tracking again
        bool                       btxpower_trackingInit;
        u8                         OFDM_index;
        u8                         CCK_index;
        u8                         Record_CCK_20Mindex;
        u8                         Record_CCK_40Mindex;
        //2007/09/10 Mars Add CCK TX Power Tracking
        ccktxbbgain_struct      cck_txbbgain_table[CCKTxBBGainTableLength];
        ccktxbbgain_struct      cck_txbbgain_ch14_table[CCKTxBBGainTableLength];
        u8 rfa_txpowertrackingindex;
        u8 rfa_txpowertrackingindex_real;
        u8 rfa_txpowertracking_default;
        u8 rfc_txpowertrackingindex;
        u8 rfc_txpowertrackingindex_real;
        u8 rfc_txpowertracking_default;
        bool btxpower_tracking;
        bool bcck_in_ch14;

        //For Backup Initial Gain
        init_gain initgain_backup;
        u8              DefaultInitialGain[4];
        // For EDCA Turbo mode, Added by amy 080515.
        bool            bis_any_nonbepkts;
        bool            bcurrent_turbo_EDCA;

        bool            bis_cur_rdlstate;
        struct timer_list fsync_timer;
        bool bfsync_processing; // 500ms Fsync timer is active or not
        u32     rate_record;
        u32     rateCountDiffRecord;
        u32     ContiuneDiffCount;
        bool bswitch_fsync;

        u8      framesync;
        u32     framesyncC34;
        u8      framesyncMonitor;
                //Added by amy 080516  for RX related
        u16     nrxAMPDU_size;
        u8      nrxAMPDU_aggr_num;

        /*Last RxDesc TSF value*/
        u32 last_rxdesc_tsf_high;
        u32 last_rxdesc_tsf_low;

        //by amy for gpio
        bool bHwRadioOff;
        //by amy for ps
        bool RFChangeInProgress; // RF Chnage in progress, by Bruce, 2007-10-30
        bool SetRFPowerStateInProgress;
        RT_OP_MODE OpMode;
        //by amy for reset_count
        u32 reset_count;
        bool bpbc_pressed;
        //by amy for debug
        u32 txpower_checkcnt;
        u32 txpower_tracking_callback_cnt;
        u8 thermal_read_val[40];
        u8 thermal_readback_index;
        u32 ccktxpower_adjustcnt_not_ch14;
        u32 ccktxpower_adjustcnt_ch14;
        u8 tx_fwinfo_force_subcarriermode;
        u8 tx_fwinfo_force_subcarrierval;

        //by amy for silent reset
        RESET_TYPE      ResetProgress;
        bool            bForcedSilentReset;
        bool            bDisableNormalResetCheck;
        u16             TxCounter;
        u16             RxCounter;
        int             IrpPendingCount;
        bool            bResetInProgress;
        bool            force_reset;
        u8              InitialGainOperateType;

        //define work item by amy 080526
        struct delayed_work update_beacon_wq;
        struct delayed_work watch_dog_wq;
        struct delayed_work txpower_tracking_wq;
        struct delayed_work rfpath_check_wq;
        struct delayed_work gpio_change_rf_wq;
        struct delayed_work initialgain_operate_wq;
        struct workqueue_struct *priv_wq;
}r8192_priv;

// for rtl8187
// now mirging to rtl8187B
/*
typedef enum{
        LOW_PRIORITY = 0x02,
        NORM_PRIORITY
        } priority_t;
*/
//for rtl8187B
#if 0
typedef enum{
        BULK_PRIORITY = 0x01,
        //RSVD0,
        //RSVD1,
        LOW_PRIORITY,
        NORM_PRIORITY,
        VO_PRIORITY,
        VI_PRIORITY, //0x05
        BE_PRIORITY,
        BK_PRIORITY,
        CMD_PRIORITY,//0x8
        RSVD3,
        BEACON_PRIORITY, //0x0A
        HIGH_PRIORITY,
        MANAGE_PRIORITY,
        RSVD4,
        RSVD5,
        UART_PRIORITY //0x0F
} priority_t;
#endif
typedef enum{
        NIC_8192E = 1,
        } nic_t;


#if 0 //defined in Qos.h
//typedef u32 AC_CODING;
#define AC0_BE  0               // ACI: 0x00    // Best Effort
#define AC1_BK  1               // ACI: 0x01    // Background
#define AC2_VI  2               // ACI: 0x10    // Video
#define AC3_VO  3               // ACI: 0x11    // Voice
#define AC_MAX  4               // Max: define total number; Should not to be used as a real enum.

//
// ECWmin/ECWmax field.
// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
//
typedef union _ECW{
        u8      charData;
        struct
        {
                u8      ECWmin:4;
                u8      ECWmax:4;
        }f;     // Field
}ECW, *PECW;

//
// ACI/AIFSN Field.
// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
//
typedef union _ACI_AIFSN{
        u8      charData;

        struct
        {
                u8      AIFSN:4;
                u8      ACM:1;
                u8      ACI:2;
                u8      Reserved:1;
        }f;     // Field
}ACI_AIFSN, *PACI_AIFSN;

//
// AC Parameters Record Format.
// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
//
typedef union _AC_PARAM{
        u32     longData;
        u8      charData[4];

        struct
        {
                ACI_AIFSN       AciAifsn;
                ECW             Ecw;
                u16             TXOPLimit;
        }f;     // Field
}AC_PARAM, *PAC_PARAM;

#endif
bool init_firmware(struct net_device *dev);
short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
u32 read_cam(struct net_device *dev, u8 addr);
void write_cam(struct net_device *dev, u8 addr, u32 data);
u8 read_nic_byte(struct net_device *dev, int x);
u8 read_nic_byte_E(struct net_device *dev, int x);
u32 read_nic_dword(struct net_device *dev, int x);
u16 read_nic_word(struct net_device *dev, int x) ;
void write_nic_byte(struct net_device *dev, int x,u8 y);
void write_nic_byte_E(struct net_device *dev, int x,u8 y);
void write_nic_word(struct net_device *dev, int x,u16 y);
void write_nic_dword(struct net_device *dev, int x,u32 y);

void rtl8192_halt_adapter(struct net_device *dev, bool reset);
void rtl8192_rx_enable(struct net_device *);
void rtl8192_tx_enable(struct net_device *);

void rtl8192_disassociate(struct net_device *dev);
//void fix_rx_fifo(struct net_device *dev);
void rtl8185_set_rf_pins_enable(struct net_device *dev,u32 a);

void rtl8192_set_anaparam(struct net_device *dev,u32 a);
void rtl8185_set_anaparam2(struct net_device *dev,u32 a);
void rtl8192_update_msr(struct net_device *dev);
int rtl8192_down(struct net_device *dev);
int rtl8192_up(struct net_device *dev);
void rtl8192_commit(struct net_device *dev);
void rtl8192_set_chan(struct net_device *dev,short ch);
void write_phy(struct net_device *dev, u8 adr, u8 data);
void write_phy_cck(struct net_device *dev, u8 adr, u32 data);
void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
void rtl8187_set_rxconf(struct net_device *dev);
//short check_nic_enough_desc(struct net_device *dev, priority_t priority);
void CamResetAllEntry(struct net_device* dev);
void EnableHWSecurityConfig8192(struct net_device *dev);
void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, const u8 *MacAddr, u8 DefaultKey, u32 *KeyContent );
void dm_cck_txpower_adjust(struct net_device *dev, bool binch14);
void firmware_init_param(struct net_device *dev);
RT_STATUS cmpk_message_handle_tx(struct net_device *dev, u8* codevirtualaddress, u32 packettype, u32 buffer_len);
void rtl8192_hw_wakeup_wq (struct work_struct *work);

short rtl8192_is_tx_queue_empty(struct net_device *dev);
#ifdef ENABLE_IPS
void IPSEnter(struct net_device *dev);
void IPSLeave(struct net_device *dev);
void InactivePsWorkItemCallback(struct net_device *dev);
void IPSLeave_wq(void *data);
void ieee80211_ips_leave_wq(struct net_device *dev);
void ieee80211_ips_leave(struct net_device *dev);
#endif
#ifdef ENABLE_LPS
void LeisurePSEnter(struct net_device *dev);
void LeisurePSLeave(struct net_device *dev);
#endif

bool NicIFEnableNIC(struct net_device* dev);
bool NicIFDisableNIC(struct net_device* dev);

void rtl8192_irq_disable(struct net_device *dev);
void PHY_SetRtl8192eRfOff(struct net_device* dev);
#endif