1/* 2 usa90msg.h 3 4 Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved 5 This file is available under a BSD-style copyright 6 7 Keyspan USB Async Message Formats for the USA19HS 8 9 Redistribution and use in source and binary forms, with or without 10 modification, are permitted provided that the following conditions are 11 met: 12 13 1. Redistributions of source code must retain this licence text 14 without modification, this list of conditions, and the following 15 disclaimer. The following copyright notice must appear immediately at 16 the beginning of all source files: 17 18 Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved 19 20 This file is available under a BSD-style copyright 21 22 2. The name of InnoSys Incorporated may not be used to endorse or promote 23 products derived from this software without specific prior written 24 permission. 25 26 THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR 27 IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 28 OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 29 NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 30 INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 31 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 32 SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 33 CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 34 LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 35 OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36 SUCH DAMAGE. 37 38 Revisions: 39 40 2003feb14 add setTxMode/txMode and cancelRxXoff to portControl 41 2003mar21 change name of PARITY_0/1 to add MARK/SPACE 42*/ 43 44#ifndef __USA90MSG__ 45#define __USA90MSG__ 46 47struct keyspan_usa90_portControlMessage 48{ 49 /* 50 there are three types of "commands" sent in the control message: 51 52 1. configuration changes which must be requested by setting 53 the corresponding "set" flag (and should only be requested 54 when necessary, to reduce overhead on the device): 55 */ 56 57 u8 setClocking, // host requests baud rate be set 58 baudLo, // host does baud divisor calculation 59 baudHi, // host does baud divisor calculation 60 61 setLcr, // host requests lcr be set 62 lcr, // use PARITY, STOPBITS, DATABITS below 63 64 setRxMode, // set receive mode 65 rxMode, // RXMODE_DMA or RXMODE_BYHAND 66 67 setTxMode, // set transmit mode 68 txMode, // TXMODE_DMA or TXMODE_BYHAND 69 70 setTxFlowControl, // host requests tx flow control be set 71 txFlowControl , // use TX_FLOW... bits below 72 setRxFlowControl, // host requests rx flow control be set 73 rxFlowControl, // use RX_FLOW... bits below 74 sendXoff, // host requests XOFF transmitted immediately 75 sendXon, // host requests XON char transmitted 76 xonChar, // specified in current character format 77 xoffChar, // specified in current character format 78 79 sendChar, // host requests char transmitted immediately 80 txChar, // character to send 81 82 setRts, // host requests RTS output be set 83 rts, // 1=on, 0=off 84 setDtr, // host requests DTR output be set 85 dtr; // 1=on, 0=off 86 87 88 /* 89 2. configuration data which is simply used as is 90 and must be specified correctly in every host message. 91 */ 92 93 u8 rxForwardingLength, // forward when this number of chars available 94 rxForwardingTimeout, // (1-31 in ms) 95 txAckSetting; // 0=don't ack, 1=normal, 2-255 TBD... 96 /* 97 3. Firmware states which cause actions if they change 98 and must be specified correctly in every host message. 99 */ 100 101 u8 portEnabled, // 0=disabled, 1=enabled 102 txFlush, // 0=normal, 1=toss outbound data 103 txBreak, // 0=break off, 1=break on 104 loopbackMode; // 0=no loopback, 1=loopback enabled 105 106 /* 107 4. commands which are flags only; these are processed in order 108 (so that, e.g., if rxFlush and rxForward flags are set, the 109 port will have no data to forward); any non-zero value 110 is respected 111 */ 112 113 u8 rxFlush, // toss inbound data 114 rxForward, // forward all inbound data, NOW (as if fwdLen==1) 115 cancelRxXoff, // cancel any receive XOFF state (_txXoff) 116 returnStatus; // return current status NOW 117}; 118 119// defines for bits in lcr 120#define USA_DATABITS_5 0x00 121#define USA_DATABITS_6 0x01 122#define USA_DATABITS_7 0x02 123#define USA_DATABITS_8 0x03 124#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes 125#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte 126#define STOPBITS_678_2 0x04 // 2 stop bits for 6-8 bit byte 127#define USA_PARITY_NONE 0x00 128#define USA_PARITY_ODD 0x08 129#define USA_PARITY_EVEN 0x18 130#define PARITY_MARK_1 0x28 // force parity MARK 131#define PARITY_SPACE_0 0x38 // force parity SPACE 132 133#define TXFLOW_CTS 0x04 134#define TXFLOW_DSR 0x08 135#define TXFLOW_XOFF 0x01 136#define TXFLOW_XOFF_ANY 0x02 137#define TXFLOW_XOFF_BITS (TXFLOW_XOFF | TXFLOW_XOFF_ANY) 138 139#define RXFLOW_XOFF 0x10 140#define RXFLOW_RTS 0x20 141#define RXFLOW_DTR 0x40 142#define RXFLOW_DSR_SENSITIVITY 0x80 143 144#define RXMODE_BYHAND 0x00 145#define RXMODE_DMA 0x02 146 147#define TXMODE_BYHAND 0x00 148#define TXMODE_DMA 0x02 149 150 151// all things called "StatusMessage" are sent on the status endpoint 152 153struct keyspan_usa90_portStatusMessage 154{ 155 u8 msr, // reports the actual MSR register 156 cts, // reports CTS pin 157 dcd, // reports DCD pin 158 dsr, // reports DSR pin 159 ri, // reports RI pin 160 _txXoff, // port is in XOFF state (we received XOFF) 161 rxBreak, // reports break state 162 rxOverrun, // count of overrun errors (since last reported) 163 rxParity, // count of parity errors (since last reported) 164 rxFrame, // count of frame errors (since last reported) 165 portState, // PORTSTATE_xxx bits (useful for debugging) 166 messageAck, // message acknowledgement 167 charAck, // character acknowledgement 168 controlResponse; // (value = returnStatus) a control message has been processed 169}; 170 171// bits in RX data message when STAT byte is included 172 173#define RXERROR_OVERRUN 0x02 174#define RXERROR_PARITY 0x04 175#define RXERROR_FRAMING 0x08 176#define RXERROR_BREAK 0x10 177 178#define PORTSTATE_ENABLED 0x80 179#define PORTSTATE_TXFLUSH 0x01 180#define PORTSTATE_TXBREAK 0x02 181#define PORTSTATE_LOOPBACK 0x04 182 183// MSR bits 184 185#define USA_MSR_dCTS 0x01 // CTS has changed since last report 186#define USA_MSR_dDSR 0x02 187#define USA_MSR_dRI 0x04 188#define USA_MSR_dDCD 0x08 189 190#define USA_MSR_CTS 0x10 // current state of CTS 191#define USA_MSR_DSR 0x20 192#define USA_USA_MSR_RI 0x40 193#define MSR_DCD 0x80 194 195// ie: the maximum length of an endpoint buffer 196#define MAX_DATA_LEN 64 197 198#endif 199