linux/drivers/usb/serial/ti_usb_3410_5052.c
<<
>>
Prefs
   1/* vi: ts=8 sw=8
   2 *
   3 * TI 3410/5052 USB Serial Driver
   4 *
   5 * Copyright (C) 2004 Texas Instruments
   6 *
   7 * This driver is based on the Linux io_ti driver, which is
   8 *   Copyright (C) 2000-2002 Inside Out Networks
   9 *   Copyright (C) 2001-2002 Greg Kroah-Hartman
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License as published by
  13 * the Free Software Foundation; either version 2 of the License, or
  14 * (at your option) any later version.
  15 *
  16 * For questions or problems with this driver, contact Texas Instruments
  17 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  18 * Peter Berger <pberger@brimson.com>.
  19 */
  20
  21#include <linux/kernel.h>
  22#include <linux/errno.h>
  23#include <linux/firmware.h>
  24#include <linux/init.h>
  25#include <linux/slab.h>
  26#include <linux/tty.h>
  27#include <linux/tty_driver.h>
  28#include <linux/tty_flip.h>
  29#include <linux/module.h>
  30#include <linux/spinlock.h>
  31#include <linux/ioctl.h>
  32#include <linux/serial.h>
  33#include <linux/kfifo.h>
  34#include <linux/mutex.h>
  35#include <linux/uaccess.h>
  36#include <linux/usb.h>
  37#include <linux/usb/serial.h>
  38
  39#include "ti_usb_3410_5052.h"
  40
  41/* Defines */
  42
  43#define TI_DRIVER_VERSION       "v0.10"
  44#define TI_DRIVER_AUTHOR        "Al Borchers <alborchers@steinerpoint.com>"
  45#define TI_DRIVER_DESC          "TI USB 3410/5052 Serial Driver"
  46
  47#define TI_FIRMWARE_BUF_SIZE    16284
  48
  49#define TI_WRITE_BUF_SIZE       1024
  50
  51#define TI_TRANSFER_TIMEOUT     2
  52
  53#define TI_DEFAULT_CLOSING_WAIT 4000            /* in .01 secs */
  54
  55/* supported setserial flags */
  56#define TI_SET_SERIAL_FLAGS     0
  57
  58/* read urb states */
  59#define TI_READ_URB_RUNNING     0
  60#define TI_READ_URB_STOPPING    1
  61#define TI_READ_URB_STOPPED     2
  62
  63#define TI_EXTRA_VID_PID_COUNT  5
  64
  65
  66/* Structures */
  67
  68struct ti_port {
  69        int                     tp_is_open;
  70        __u8                    tp_msr;
  71        __u8                    tp_lsr;
  72        __u8                    tp_shadow_mcr;
  73        __u8                    tp_uart_mode;   /* 232 or 485 modes */
  74        unsigned int            tp_uart_base_addr;
  75        int                     tp_flags;
  76        int                     tp_closing_wait;/* in .01 secs */
  77        struct async_icount     tp_icount;
  78        wait_queue_head_t       tp_msr_wait;    /* wait for msr change */
  79        wait_queue_head_t       tp_write_wait;
  80        struct ti_device        *tp_tdev;
  81        struct usb_serial_port  *tp_port;
  82        spinlock_t              tp_lock;
  83        int                     tp_read_urb_state;
  84        int                     tp_write_urb_in_use;
  85        struct kfifo            write_fifo;
  86};
  87
  88struct ti_device {
  89        struct mutex            td_open_close_lock;
  90        int                     td_open_port_count;
  91        struct usb_serial       *td_serial;
  92        int                     td_is_3410;
  93        int                     td_urb_error;
  94};
  95
  96
  97/* Function Declarations */
  98
  99static int ti_startup(struct usb_serial *serial);
 100static void ti_release(struct usb_serial *serial);
 101static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
 102static void ti_close(struct usb_serial_port *port);
 103static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 104                const unsigned char *data, int count);
 105static int ti_write_room(struct tty_struct *tty);
 106static int ti_chars_in_buffer(struct tty_struct *tty);
 107static void ti_throttle(struct tty_struct *tty);
 108static void ti_unthrottle(struct tty_struct *tty);
 109static int ti_ioctl(struct tty_struct *tty, struct file *file,
 110                unsigned int cmd, unsigned long arg);
 111static int ti_get_icount(struct tty_struct *tty,
 112                struct serial_icounter_struct *icount);
 113static void ti_set_termios(struct tty_struct *tty,
 114                struct usb_serial_port *port, struct ktermios *old_termios);
 115static int ti_tiocmget(struct tty_struct *tty, struct file *file);
 116static int ti_tiocmset(struct tty_struct *tty, struct file *file,
 117                unsigned int set, unsigned int clear);
 118static void ti_break(struct tty_struct *tty, int break_state);
 119static void ti_interrupt_callback(struct urb *urb);
 120static void ti_bulk_in_callback(struct urb *urb);
 121static void ti_bulk_out_callback(struct urb *urb);
 122
 123static void ti_recv(struct device *dev, struct tty_struct *tty,
 124        unsigned char *data, int length);
 125static void ti_send(struct ti_port *tport);
 126static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
 127static int ti_get_lsr(struct ti_port *tport);
 128static int ti_get_serial_info(struct ti_port *tport,
 129        struct serial_struct __user *ret_arg);
 130static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 131        struct serial_struct __user *new_arg);
 132static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
 133
 134static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush);
 135
 136static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
 137static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
 138
 139static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
 140        __u16 moduleid, __u16 value, __u8 *data, int size);
 141static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 142        __u16 moduleid, __u16 value, __u8 *data, int size);
 143
 144static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 145        __u8 mask, __u8 byte);
 146
 147static int ti_download_firmware(struct ti_device *tdev);
 148
 149
 150/* Data */
 151
 152/* module parameters */
 153static int debug;
 154static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
 155static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
 156static unsigned int vendor_3410_count;
 157static ushort product_3410[TI_EXTRA_VID_PID_COUNT];
 158static unsigned int product_3410_count;
 159static ushort vendor_5052[TI_EXTRA_VID_PID_COUNT];
 160static unsigned int vendor_5052_count;
 161static ushort product_5052[TI_EXTRA_VID_PID_COUNT];
 162static unsigned int product_5052_count;
 163
 164/* supported devices */
 165/* the array dimension is the number of default entries plus */
 166/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 167/* null entry */
 168static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
 169        { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 170        { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 171        { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
 172        { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
 173        { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 174        { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 175        { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
 176        { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
 177        { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
 178        { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
 179        { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 180        { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 181        { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
 182};
 183
 184static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
 185        { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 186        { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 187        { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 188        { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 189};
 190
 191static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
 192        { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 193        { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 194        { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
 195        { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
 196        { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 197        { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 198        { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
 199        { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
 200        { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
 201        { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
 202        { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 203        { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 204        { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 205        { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 206        { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 207        { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
 208        { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
 209        { }
 210};
 211
 212static struct usb_driver ti_usb_driver = {
 213        .name                   = "ti_usb_3410_5052",
 214        .probe                  = usb_serial_probe,
 215        .disconnect             = usb_serial_disconnect,
 216        .id_table               = ti_id_table_combined,
 217        .no_dynamic_id =        1,
 218};
 219
 220static struct usb_serial_driver ti_1port_device = {
 221        .driver = {
 222                .owner          = THIS_MODULE,
 223                .name           = "ti_usb_3410_5052_1",
 224        },
 225        .description            = "TI USB 3410 1 port adapter",
 226        .usb_driver             = &ti_usb_driver,
 227        .id_table               = ti_id_table_3410,
 228        .num_ports              = 1,
 229        .attach                 = ti_startup,
 230        .release                = ti_release,
 231        .open                   = ti_open,
 232        .close                  = ti_close,
 233        .write                  = ti_write,
 234        .write_room             = ti_write_room,
 235        .chars_in_buffer        = ti_chars_in_buffer,
 236        .throttle               = ti_throttle,
 237        .unthrottle             = ti_unthrottle,
 238        .ioctl                  = ti_ioctl,
 239        .set_termios            = ti_set_termios,
 240        .tiocmget               = ti_tiocmget,
 241        .tiocmset               = ti_tiocmset,
 242        .get_icount             = ti_get_icount,
 243        .break_ctl              = ti_break,
 244        .read_int_callback      = ti_interrupt_callback,
 245        .read_bulk_callback     = ti_bulk_in_callback,
 246        .write_bulk_callback    = ti_bulk_out_callback,
 247};
 248
 249static struct usb_serial_driver ti_2port_device = {
 250        .driver = {
 251                .owner          = THIS_MODULE,
 252                .name           = "ti_usb_3410_5052_2",
 253        },
 254        .description            = "TI USB 5052 2 port adapter",
 255        .usb_driver             = &ti_usb_driver,
 256        .id_table               = ti_id_table_5052,
 257        .num_ports              = 2,
 258        .attach                 = ti_startup,
 259        .release                = ti_release,
 260        .open                   = ti_open,
 261        .close                  = ti_close,
 262        .write                  = ti_write,
 263        .write_room             = ti_write_room,
 264        .chars_in_buffer        = ti_chars_in_buffer,
 265        .throttle               = ti_throttle,
 266        .unthrottle             = ti_unthrottle,
 267        .ioctl                  = ti_ioctl,
 268        .set_termios            = ti_set_termios,
 269        .tiocmget               = ti_tiocmget,
 270        .tiocmset               = ti_tiocmset,
 271        .get_icount             = ti_get_icount,
 272        .break_ctl              = ti_break,
 273        .read_int_callback      = ti_interrupt_callback,
 274        .read_bulk_callback     = ti_bulk_in_callback,
 275        .write_bulk_callback    = ti_bulk_out_callback,
 276};
 277
 278
 279/* Module */
 280
 281MODULE_AUTHOR(TI_DRIVER_AUTHOR);
 282MODULE_DESCRIPTION(TI_DRIVER_DESC);
 283MODULE_VERSION(TI_DRIVER_VERSION);
 284MODULE_LICENSE("GPL");
 285
 286MODULE_FIRMWARE("ti_3410.fw");
 287MODULE_FIRMWARE("ti_5052.fw");
 288MODULE_FIRMWARE("mts_cdma.fw");
 289MODULE_FIRMWARE("mts_gsm.fw");
 290MODULE_FIRMWARE("mts_edge.fw");
 291MODULE_FIRMWARE("mts_mt9234mu.fw");
 292MODULE_FIRMWARE("mts_mt9234zba.fw");
 293
 294module_param(debug, bool, S_IRUGO | S_IWUSR);
 295MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
 296
 297module_param(closing_wait, int, S_IRUGO | S_IWUSR);
 298MODULE_PARM_DESC(closing_wait,
 299    "Maximum wait for data to drain in close, in .01 secs, default is 4000");
 300
 301module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO);
 302MODULE_PARM_DESC(vendor_3410,
 303                "Vendor ids for 3410 based devices, 1-5 short integers");
 304module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO);
 305MODULE_PARM_DESC(product_3410,
 306                "Product ids for 3410 based devices, 1-5 short integers");
 307module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO);
 308MODULE_PARM_DESC(vendor_5052,
 309                "Vendor ids for 5052 based devices, 1-5 short integers");
 310module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO);
 311MODULE_PARM_DESC(product_5052,
 312                "Product ids for 5052 based devices, 1-5 short integers");
 313
 314MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 315
 316
 317/* Functions */
 318
 319static int __init ti_init(void)
 320{
 321        int i, j, c;
 322        int ret;
 323
 324        /* insert extra vendor and product ids */
 325        c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1;
 326        j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
 327        for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++, c++) {
 328                ti_id_table_3410[j].idVendor = vendor_3410[i];
 329                ti_id_table_3410[j].idProduct = product_3410[i];
 330                ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 331                ti_id_table_combined[c].idVendor = vendor_3410[i];
 332                ti_id_table_combined[c].idProduct = product_3410[i];
 333                ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 334        }
 335        j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
 336        for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++, c++) {
 337                ti_id_table_5052[j].idVendor = vendor_5052[i];
 338                ti_id_table_5052[j].idProduct = product_5052[i];
 339                ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 340                ti_id_table_combined[c].idVendor = vendor_5052[i];
 341                ti_id_table_combined[c].idProduct = product_5052[i];
 342                ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 343        }
 344
 345        ret = usb_serial_register(&ti_1port_device);
 346        if (ret)
 347                goto failed_1port;
 348        ret = usb_serial_register(&ti_2port_device);
 349        if (ret)
 350                goto failed_2port;
 351
 352        ret = usb_register(&ti_usb_driver);
 353        if (ret)
 354                goto failed_usb;
 355
 356        printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
 357               TI_DRIVER_DESC "\n");
 358
 359        return 0;
 360
 361failed_usb:
 362        usb_serial_deregister(&ti_2port_device);
 363failed_2port:
 364        usb_serial_deregister(&ti_1port_device);
 365failed_1port:
 366        return ret;
 367}
 368
 369
 370static void __exit ti_exit(void)
 371{
 372        usb_deregister(&ti_usb_driver);
 373        usb_serial_deregister(&ti_1port_device);
 374        usb_serial_deregister(&ti_2port_device);
 375}
 376
 377
 378module_init(ti_init);
 379module_exit(ti_exit);
 380
 381
 382static int ti_startup(struct usb_serial *serial)
 383{
 384        struct ti_device *tdev;
 385        struct ti_port *tport;
 386        struct usb_device *dev = serial->dev;
 387        int status;
 388        int i;
 389
 390
 391        dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
 392            __func__, le16_to_cpu(dev->descriptor.idProduct),
 393            dev->descriptor.bNumConfigurations,
 394            dev->actconfig->desc.bConfigurationValue);
 395
 396        /* create device structure */
 397        tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
 398        if (tdev == NULL) {
 399                dev_err(&dev->dev, "%s - out of memory\n", __func__);
 400                return -ENOMEM;
 401        }
 402        mutex_init(&tdev->td_open_close_lock);
 403        tdev->td_serial = serial;
 404        usb_set_serial_data(serial, tdev);
 405
 406        /* determine device type */
 407        if (usb_match_id(serial->interface, ti_id_table_3410))
 408                tdev->td_is_3410 = 1;
 409        dbg("%s - device type is %s", __func__,
 410                                tdev->td_is_3410 ? "3410" : "5052");
 411
 412        /* if we have only 1 configuration, download firmware */
 413        if (dev->descriptor.bNumConfigurations == 1) {
 414                if ((status = ti_download_firmware(tdev)) != 0)
 415                        goto free_tdev;
 416
 417                /* 3410 must be reset, 5052 resets itself */
 418                if (tdev->td_is_3410) {
 419                        msleep_interruptible(100);
 420                        usb_reset_device(dev);
 421                }
 422
 423                status = -ENODEV;
 424                goto free_tdev;
 425        }
 426
 427        /* the second configuration must be set */
 428        if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
 429                status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
 430                status = status ? status : -ENODEV;
 431                goto free_tdev;
 432        }
 433
 434        /* set up port structures */
 435        for (i = 0; i < serial->num_ports; ++i) {
 436                tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
 437                if (tport == NULL) {
 438                        dev_err(&dev->dev, "%s - out of memory\n", __func__);
 439                        status = -ENOMEM;
 440                        goto free_tports;
 441                }
 442                spin_lock_init(&tport->tp_lock);
 443                tport->tp_uart_base_addr = (i == 0 ?
 444                                TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
 445                tport->tp_closing_wait = closing_wait;
 446                init_waitqueue_head(&tport->tp_msr_wait);
 447                init_waitqueue_head(&tport->tp_write_wait);
 448                if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE,
 449                                                                GFP_KERNEL)) {
 450                        dev_err(&dev->dev, "%s - out of memory\n", __func__);
 451                        kfree(tport);
 452                        status = -ENOMEM;
 453                        goto free_tports;
 454                }
 455                tport->tp_port = serial->port[i];
 456                tport->tp_tdev = tdev;
 457                usb_set_serial_port_data(serial->port[i], tport);
 458                tport->tp_uart_mode = 0;        /* default is RS232 */
 459        }
 460
 461        return 0;
 462
 463free_tports:
 464        for (--i; i >= 0; --i) {
 465                tport = usb_get_serial_port_data(serial->port[i]);
 466                kfifo_free(&tport->write_fifo);
 467                kfree(tport);
 468                usb_set_serial_port_data(serial->port[i], NULL);
 469        }
 470free_tdev:
 471        kfree(tdev);
 472        usb_set_serial_data(serial, NULL);
 473        return status;
 474}
 475
 476
 477static void ti_release(struct usb_serial *serial)
 478{
 479        int i;
 480        struct ti_device *tdev = usb_get_serial_data(serial);
 481        struct ti_port *tport;
 482
 483        dbg("%s", __func__);
 484
 485        for (i = 0; i < serial->num_ports; ++i) {
 486                tport = usb_get_serial_port_data(serial->port[i]);
 487                if (tport) {
 488                        kfifo_free(&tport->write_fifo);
 489                        kfree(tport);
 490                }
 491        }
 492
 493        kfree(tdev);
 494}
 495
 496
 497static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 498{
 499        struct ti_port *tport = usb_get_serial_port_data(port);
 500        struct ti_device *tdev;
 501        struct usb_device *dev;
 502        struct urb *urb;
 503        int port_number;
 504        int status;
 505        __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS |
 506                             TI_PIPE_TIMEOUT_ENABLE |
 507                             (TI_TRANSFER_TIMEOUT << 2));
 508
 509        dbg("%s - port %d", __func__, port->number);
 510
 511        if (tport == NULL)
 512                return -ENODEV;
 513
 514        dev = port->serial->dev;
 515        tdev = tport->tp_tdev;
 516
 517        /* only one open on any port on a device at a time */
 518        if (mutex_lock_interruptible(&tdev->td_open_close_lock))
 519                return -ERESTARTSYS;
 520
 521        port_number = port->number - port->serial->minor;
 522
 523        memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
 524
 525        tport->tp_msr = 0;
 526        tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
 527
 528        /* start interrupt urb the first time a port is opened on this device */
 529        if (tdev->td_open_port_count == 0) {
 530                dbg("%s - start interrupt in urb", __func__);
 531                urb = tdev->td_serial->port[0]->interrupt_in_urb;
 532                if (!urb) {
 533                        dev_err(&port->dev, "%s - no interrupt urb\n",
 534                                                                __func__);
 535                        status = -EINVAL;
 536                        goto release_lock;
 537                }
 538                urb->complete = ti_interrupt_callback;
 539                urb->context = tdev;
 540                urb->dev = dev;
 541                status = usb_submit_urb(urb, GFP_KERNEL);
 542                if (status) {
 543                        dev_err(&port->dev,
 544                                "%s - submit interrupt urb failed, %d\n",
 545                                        __func__, status);
 546                        goto release_lock;
 547                }
 548        }
 549
 550        if (tty)
 551                ti_set_termios(tty, port, tty->termios);
 552
 553        dbg("%s - sending TI_OPEN_PORT", __func__);
 554        status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 555                (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 556        if (status) {
 557                dev_err(&port->dev, "%s - cannot send open command, %d\n",
 558                                                        __func__, status);
 559                goto unlink_int_urb;
 560        }
 561
 562        dbg("%s - sending TI_START_PORT", __func__);
 563        status = ti_command_out_sync(tdev, TI_START_PORT,
 564                (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 565        if (status) {
 566                dev_err(&port->dev, "%s - cannot send start command, %d\n",
 567                                                        __func__, status);
 568                goto unlink_int_urb;
 569        }
 570
 571        dbg("%s - sending TI_PURGE_PORT", __func__);
 572        status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 573                (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
 574        if (status) {
 575                dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
 576                                                        __func__, status);
 577                goto unlink_int_urb;
 578        }
 579        status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 580                (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
 581        if (status) {
 582                dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
 583                                                        __func__, status);
 584                goto unlink_int_urb;
 585        }
 586
 587        /* reset the data toggle on the bulk endpoints to work around bug in
 588         * host controllers where things get out of sync some times */
 589        usb_clear_halt(dev, port->write_urb->pipe);
 590        usb_clear_halt(dev, port->read_urb->pipe);
 591
 592        if (tty)
 593                ti_set_termios(tty, port, tty->termios);
 594
 595        dbg("%s - sending TI_OPEN_PORT (2)", __func__);
 596        status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 597                (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 598        if (status) {
 599                dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
 600                                                        __func__, status);
 601                goto unlink_int_urb;
 602        }
 603
 604        dbg("%s - sending TI_START_PORT (2)", __func__);
 605        status = ti_command_out_sync(tdev, TI_START_PORT,
 606                (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 607        if (status) {
 608                dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
 609                                                        __func__, status);
 610                goto unlink_int_urb;
 611        }
 612
 613        /* start read urb */
 614        dbg("%s - start read urb", __func__);
 615        urb = port->read_urb;
 616        if (!urb) {
 617                dev_err(&port->dev, "%s - no read urb\n", __func__);
 618                status = -EINVAL;
 619                goto unlink_int_urb;
 620        }
 621        tport->tp_read_urb_state = TI_READ_URB_RUNNING;
 622        urb->complete = ti_bulk_in_callback;
 623        urb->context = tport;
 624        urb->dev = dev;
 625        status = usb_submit_urb(urb, GFP_KERNEL);
 626        if (status) {
 627                dev_err(&port->dev, "%s - submit read urb failed, %d\n",
 628                                                        __func__, status);
 629                goto unlink_int_urb;
 630        }
 631
 632        tport->tp_is_open = 1;
 633        ++tdev->td_open_port_count;
 634
 635        goto release_lock;
 636
 637unlink_int_urb:
 638        if (tdev->td_open_port_count == 0)
 639                usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 640release_lock:
 641        mutex_unlock(&tdev->td_open_close_lock);
 642        dbg("%s - exit %d", __func__, status);
 643        return status;
 644}
 645
 646
 647static void ti_close(struct usb_serial_port *port)
 648{
 649        struct ti_device *tdev;
 650        struct ti_port *tport;
 651        int port_number;
 652        int status;
 653        int do_unlock;
 654
 655        dbg("%s - port %d", __func__, port->number);
 656
 657        tdev = usb_get_serial_data(port->serial);
 658        tport = usb_get_serial_port_data(port);
 659        if (tdev == NULL || tport == NULL)
 660                return;
 661
 662        tport->tp_is_open = 0;
 663
 664        ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1);
 665
 666        usb_kill_urb(port->read_urb);
 667        usb_kill_urb(port->write_urb);
 668        tport->tp_write_urb_in_use = 0;
 669
 670        port_number = port->number - port->serial->minor;
 671
 672        dbg("%s - sending TI_CLOSE_PORT", __func__);
 673        status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
 674                     (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 675        if (status)
 676                dev_err(&port->dev,
 677                        "%s - cannot send close port command, %d\n"
 678                                                        , __func__, status);
 679
 680        /* if mutex_lock is interrupted, continue anyway */
 681        do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock);
 682        --tport->tp_tdev->td_open_port_count;
 683        if (tport->tp_tdev->td_open_port_count <= 0) {
 684                /* last port is closed, shut down interrupt urb */
 685                usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 686                tport->tp_tdev->td_open_port_count = 0;
 687        }
 688        if (do_unlock)
 689                mutex_unlock(&tdev->td_open_close_lock);
 690
 691        dbg("%s - exit", __func__);
 692}
 693
 694
 695static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 696                        const unsigned char *data, int count)
 697{
 698        struct ti_port *tport = usb_get_serial_port_data(port);
 699
 700        dbg("%s - port %d", __func__, port->number);
 701
 702        if (count == 0) {
 703                dbg("%s - write request of 0 bytes", __func__);
 704                return 0;
 705        }
 706
 707        if (tport == NULL || !tport->tp_is_open)
 708                return -ENODEV;
 709
 710        count = kfifo_in_locked(&tport->write_fifo, data, count,
 711                                                        &tport->tp_lock);
 712        ti_send(tport);
 713
 714        return count;
 715}
 716
 717
 718static int ti_write_room(struct tty_struct *tty)
 719{
 720        struct usb_serial_port *port = tty->driver_data;
 721        struct ti_port *tport = usb_get_serial_port_data(port);
 722        int room = 0;
 723        unsigned long flags;
 724
 725        dbg("%s - port %d", __func__, port->number);
 726
 727        if (tport == NULL)
 728                return 0;
 729
 730        spin_lock_irqsave(&tport->tp_lock, flags);
 731        room = kfifo_avail(&tport->write_fifo);
 732        spin_unlock_irqrestore(&tport->tp_lock, flags);
 733
 734        dbg("%s - returns %d", __func__, room);
 735        return room;
 736}
 737
 738
 739static int ti_chars_in_buffer(struct tty_struct *tty)
 740{
 741        struct usb_serial_port *port = tty->driver_data;
 742        struct ti_port *tport = usb_get_serial_port_data(port);
 743        int chars = 0;
 744        unsigned long flags;
 745
 746        dbg("%s - port %d", __func__, port->number);
 747
 748        if (tport == NULL)
 749                return 0;
 750
 751        spin_lock_irqsave(&tport->tp_lock, flags);
 752        chars = kfifo_len(&tport->write_fifo);
 753        spin_unlock_irqrestore(&tport->tp_lock, flags);
 754
 755        dbg("%s - returns %d", __func__, chars);
 756        return chars;
 757}
 758
 759
 760static void ti_throttle(struct tty_struct *tty)
 761{
 762        struct usb_serial_port *port = tty->driver_data;
 763        struct ti_port *tport = usb_get_serial_port_data(port);
 764
 765        dbg("%s - port %d", __func__, port->number);
 766
 767        if (tport == NULL)
 768                return;
 769
 770        if (I_IXOFF(tty) || C_CRTSCTS(tty))
 771                ti_stop_read(tport, tty);
 772
 773}
 774
 775
 776static void ti_unthrottle(struct tty_struct *tty)
 777{
 778        struct usb_serial_port *port = tty->driver_data;
 779        struct ti_port *tport = usb_get_serial_port_data(port);
 780        int status;
 781
 782        dbg("%s - port %d", __func__, port->number);
 783
 784        if (tport == NULL)
 785                return;
 786
 787        if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
 788                status = ti_restart_read(tport, tty);
 789                if (status)
 790                        dev_err(&port->dev, "%s - cannot restart read, %d\n",
 791                                                        __func__, status);
 792        }
 793}
 794
 795static int ti_get_icount(struct tty_struct *tty,
 796                struct serial_icounter_struct *icount)
 797{
 798        struct usb_serial_port *port = tty->driver_data;
 799        struct ti_port *tport = usb_get_serial_port_data(port);
 800        struct async_icount cnow = tport->tp_icount;
 801
 802        dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
 803                __func__, port->number,
 804                cnow.rx, cnow.tx);
 805
 806        icount->cts = cnow.cts;
 807        icount->dsr = cnow.dsr;
 808        icount->rng = cnow.rng;
 809        icount->dcd = cnow.dcd;
 810        icount->rx = cnow.rx;
 811        icount->tx = cnow.tx;
 812        icount->frame = cnow.frame;
 813        icount->overrun = cnow.overrun;
 814        icount->parity = cnow.parity;
 815        icount->brk = cnow.brk;
 816        icount->buf_overrun = cnow.buf_overrun;
 817
 818        return 0;
 819}
 820
 821static int ti_ioctl(struct tty_struct *tty, struct file *file,
 822        unsigned int cmd, unsigned long arg)
 823{
 824        struct usb_serial_port *port = tty->driver_data;
 825        struct ti_port *tport = usb_get_serial_port_data(port);
 826        struct async_icount cnow;
 827        struct async_icount cprev;
 828
 829        dbg("%s - port %d, cmd = 0x%04X", __func__, port->number, cmd);
 830
 831        if (tport == NULL)
 832                return -ENODEV;
 833
 834        switch (cmd) {
 835        case TIOCGSERIAL:
 836                dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
 837                return ti_get_serial_info(tport,
 838                                (struct serial_struct __user *)arg);
 839        case TIOCSSERIAL:
 840                dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
 841                return ti_set_serial_info(tty, tport,
 842                                (struct serial_struct __user *)arg);
 843        case TIOCMIWAIT:
 844                dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
 845                cprev = tport->tp_icount;
 846                while (1) {
 847                        interruptible_sleep_on(&tport->tp_msr_wait);
 848                        if (signal_pending(current))
 849                                return -ERESTARTSYS;
 850                        cnow = tport->tp_icount;
 851                        if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
 852                            cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
 853                                return -EIO; /* no change => error */
 854                        if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 855                            ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
 856                            ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
 857                            ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)))
 858                                return 0;
 859                        cprev = cnow;
 860                }
 861                break;
 862        }
 863        return -ENOIOCTLCMD;
 864}
 865
 866
 867static void ti_set_termios(struct tty_struct *tty,
 868                struct usb_serial_port *port, struct ktermios *old_termios)
 869{
 870        struct ti_port *tport = usb_get_serial_port_data(port);
 871        struct ti_uart_config *config;
 872        tcflag_t cflag, iflag;
 873        int baud;
 874        int status;
 875        int port_number = port->number - port->serial->minor;
 876        unsigned int mcr;
 877
 878        dbg("%s - port %d", __func__, port->number);
 879
 880        cflag = tty->termios->c_cflag;
 881        iflag = tty->termios->c_iflag;
 882
 883        dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
 884        dbg("%s - old clfag %08x, old iflag %08x", __func__,
 885                                old_termios->c_cflag, old_termios->c_iflag);
 886
 887        if (tport == NULL)
 888                return;
 889
 890        config = kmalloc(sizeof(*config), GFP_KERNEL);
 891        if (!config) {
 892                dev_err(&port->dev, "%s - out of memory\n", __func__);
 893                return;
 894        }
 895
 896        config->wFlags = 0;
 897
 898        /* these flags must be set */
 899        config->wFlags |= TI_UART_ENABLE_MS_INTS;
 900        config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA;
 901        config->bUartMode = (__u8)(tport->tp_uart_mode);
 902
 903        switch (cflag & CSIZE) {
 904        case CS5:
 905                    config->bDataBits = TI_UART_5_DATA_BITS;
 906                    break;
 907        case CS6:
 908                    config->bDataBits = TI_UART_6_DATA_BITS;
 909                    break;
 910        case CS7:
 911                    config->bDataBits = TI_UART_7_DATA_BITS;
 912                    break;
 913        default:
 914        case CS8:
 915                    config->bDataBits = TI_UART_8_DATA_BITS;
 916                    break;
 917        }
 918
 919        /* CMSPAR isn't supported by this driver */
 920        tty->termios->c_cflag &= ~CMSPAR;
 921
 922        if (cflag & PARENB) {
 923                if (cflag & PARODD) {
 924                        config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
 925                        config->bParity = TI_UART_ODD_PARITY;
 926                } else {
 927                        config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING;
 928                        config->bParity = TI_UART_EVEN_PARITY;
 929                }
 930        } else {
 931                config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING;
 932                config->bParity = TI_UART_NO_PARITY;
 933        }
 934
 935        if (cflag & CSTOPB)
 936                config->bStopBits = TI_UART_2_STOP_BITS;
 937        else
 938                config->bStopBits = TI_UART_1_STOP_BITS;
 939
 940        if (cflag & CRTSCTS) {
 941                /* RTS flow control must be off to drop RTS for baud rate B0 */
 942                if ((cflag & CBAUD) != B0)
 943                        config->wFlags |= TI_UART_ENABLE_RTS_IN;
 944                config->wFlags |= TI_UART_ENABLE_CTS_OUT;
 945        } else {
 946                tty->hw_stopped = 0;
 947                ti_restart_read(tport, tty);
 948        }
 949
 950        if (I_IXOFF(tty) || I_IXON(tty)) {
 951                config->cXon  = START_CHAR(tty);
 952                config->cXoff = STOP_CHAR(tty);
 953
 954                if (I_IXOFF(tty))
 955                        config->wFlags |= TI_UART_ENABLE_X_IN;
 956                else
 957                        ti_restart_read(tport, tty);
 958
 959                if (I_IXON(tty))
 960                        config->wFlags |= TI_UART_ENABLE_X_OUT;
 961        }
 962
 963        baud = tty_get_baud_rate(tty);
 964        if (!baud)
 965                baud = 9600;
 966        if (tport->tp_tdev->td_is_3410)
 967                config->wBaudRate = (__u16)((923077 + baud/2) / baud);
 968        else
 969                config->wBaudRate = (__u16)((461538 + baud/2) / baud);
 970
 971        /* FIXME: Should calculate resulting baud here and report it back */
 972        if ((cflag & CBAUD) != B0)
 973                tty_encode_baud_rate(tty, baud, baud);
 974
 975        dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
 976        __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
 977
 978        cpu_to_be16s(&config->wBaudRate);
 979        cpu_to_be16s(&config->wFlags);
 980
 981        status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
 982                (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
 983                sizeof(*config));
 984        if (status)
 985                dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
 986                                        __func__, port_number, status);
 987
 988        /* SET_CONFIG asserts RTS and DTR, reset them correctly */
 989        mcr = tport->tp_shadow_mcr;
 990        /* if baud rate is B0, clear RTS and DTR */
 991        if ((cflag & CBAUD) == B0)
 992                mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
 993        status = ti_set_mcr(tport, mcr);
 994        if (status)
 995                dev_err(&port->dev,
 996                        "%s - cannot set modem control on port %d, %d\n",
 997                                                __func__, port_number, status);
 998
 999        kfree(config);
1000}
1001
1002
1003static int ti_tiocmget(struct tty_struct *tty, struct file *file)
1004{
1005        struct usb_serial_port *port = tty->driver_data;
1006        struct ti_port *tport = usb_get_serial_port_data(port);
1007        unsigned int result;
1008        unsigned int msr;
1009        unsigned int mcr;
1010        unsigned long flags;
1011
1012        dbg("%s - port %d", __func__, port->number);
1013
1014        if (tport == NULL)
1015                return -ENODEV;
1016
1017        spin_lock_irqsave(&tport->tp_lock, flags);
1018        msr = tport->tp_msr;
1019        mcr = tport->tp_shadow_mcr;
1020        spin_unlock_irqrestore(&tport->tp_lock, flags);
1021
1022        result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1023                | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1024                | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1025                | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1026                | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1027                | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1028                | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1029
1030        dbg("%s - 0x%04X", __func__, result);
1031
1032        return result;
1033}
1034
1035
1036static int ti_tiocmset(struct tty_struct *tty, struct file *file,
1037        unsigned int set, unsigned int clear)
1038{
1039        struct usb_serial_port *port = tty->driver_data;
1040        struct ti_port *tport = usb_get_serial_port_data(port);
1041        unsigned int mcr;
1042        unsigned long flags;
1043
1044        dbg("%s - port %d", __func__, port->number);
1045
1046        if (tport == NULL)
1047                return -ENODEV;
1048
1049        spin_lock_irqsave(&tport->tp_lock, flags);
1050        mcr = tport->tp_shadow_mcr;
1051
1052        if (set & TIOCM_RTS)
1053                mcr |= TI_MCR_RTS;
1054        if (set & TIOCM_DTR)
1055                mcr |= TI_MCR_DTR;
1056        if (set & TIOCM_LOOP)
1057                mcr |= TI_MCR_LOOP;
1058
1059        if (clear & TIOCM_RTS)
1060                mcr &= ~TI_MCR_RTS;
1061        if (clear & TIOCM_DTR)
1062                mcr &= ~TI_MCR_DTR;
1063        if (clear & TIOCM_LOOP)
1064                mcr &= ~TI_MCR_LOOP;
1065        spin_unlock_irqrestore(&tport->tp_lock, flags);
1066
1067        return ti_set_mcr(tport, mcr);
1068}
1069
1070
1071static void ti_break(struct tty_struct *tty, int break_state)
1072{
1073        struct usb_serial_port *port = tty->driver_data;
1074        struct ti_port *tport = usb_get_serial_port_data(port);
1075        int status;
1076
1077        dbg("%s - state = %d", __func__, break_state);
1078
1079        if (tport == NULL)
1080                return;
1081
1082        ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0);
1083
1084        status = ti_write_byte(tport->tp_tdev,
1085                tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1086                TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1087
1088        if (status)
1089                dbg("%s - error setting break, %d", __func__, status);
1090}
1091
1092
1093static void ti_interrupt_callback(struct urb *urb)
1094{
1095        struct ti_device *tdev = urb->context;
1096        struct usb_serial_port *port;
1097        struct usb_serial *serial = tdev->td_serial;
1098        struct ti_port *tport;
1099        struct device *dev = &urb->dev->dev;
1100        unsigned char *data = urb->transfer_buffer;
1101        int length = urb->actual_length;
1102        int port_number;
1103        int function;
1104        int status = urb->status;
1105        int retval;
1106        __u8 msr;
1107
1108        dbg("%s", __func__);
1109
1110        switch (status) {
1111        case 0:
1112                break;
1113        case -ECONNRESET:
1114        case -ENOENT:
1115        case -ESHUTDOWN:
1116                dbg("%s - urb shutting down, %d", __func__, status);
1117                tdev->td_urb_error = 1;
1118                return;
1119        default:
1120                dev_err(dev, "%s - nonzero urb status, %d\n",
1121                        __func__, status);
1122                tdev->td_urb_error = 1;
1123                goto exit;
1124        }
1125
1126        if (length != 2) {
1127                dbg("%s - bad packet size, %d", __func__, length);
1128                goto exit;
1129        }
1130
1131        if (data[0] == TI_CODE_HARDWARE_ERROR) {
1132                dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
1133                goto exit;
1134        }
1135
1136        port_number = TI_GET_PORT_FROM_CODE(data[0]);
1137        function = TI_GET_FUNC_FROM_CODE(data[0]);
1138
1139        dbg("%s - port_number %d, function %d, data 0x%02X",
1140                                __func__, port_number, function, data[1]);
1141
1142        if (port_number >= serial->num_ports) {
1143                dev_err(dev, "%s - bad port number, %d\n",
1144                                                __func__, port_number);
1145                goto exit;
1146        }
1147
1148        port = serial->port[port_number];
1149
1150        tport = usb_get_serial_port_data(port);
1151        if (!tport)
1152                goto exit;
1153
1154        switch (function) {
1155        case TI_CODE_DATA_ERROR:
1156                dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
1157                                        __func__, port_number, data[1]);
1158                break;
1159
1160        case TI_CODE_MODEM_STATUS:
1161                msr = data[1];
1162                dbg("%s - port %d, msr 0x%02X", __func__, port_number, msr);
1163                ti_handle_new_msr(tport, msr);
1164                break;
1165
1166        default:
1167                dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
1168                                                        __func__, data[1]);
1169                break;
1170        }
1171
1172exit:
1173        retval = usb_submit_urb(urb, GFP_ATOMIC);
1174        if (retval)
1175                dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
1176                        __func__, retval);
1177}
1178
1179
1180static void ti_bulk_in_callback(struct urb *urb)
1181{
1182        struct ti_port *tport = urb->context;
1183        struct usb_serial_port *port = tport->tp_port;
1184        struct device *dev = &urb->dev->dev;
1185        int status = urb->status;
1186        int retval = 0;
1187        struct tty_struct *tty;
1188
1189        dbg("%s", __func__);
1190
1191        switch (status) {
1192        case 0:
1193                break;
1194        case -ECONNRESET:
1195        case -ENOENT:
1196        case -ESHUTDOWN:
1197                dbg("%s - urb shutting down, %d", __func__, status);
1198                tport->tp_tdev->td_urb_error = 1;
1199                wake_up_interruptible(&tport->tp_write_wait);
1200                return;
1201        default:
1202                dev_err(dev, "%s - nonzero urb status, %d\n",
1203                        __func__, status);
1204                tport->tp_tdev->td_urb_error = 1;
1205                wake_up_interruptible(&tport->tp_write_wait);
1206        }
1207
1208        if (status == -EPIPE)
1209                goto exit;
1210
1211        if (status) {
1212                dev_err(dev, "%s - stopping read!\n", __func__);
1213                return;
1214        }
1215
1216        tty = tty_port_tty_get(&port->port);
1217        if (tty) {
1218                if (urb->actual_length) {
1219                        usb_serial_debug_data(debug, dev, __func__,
1220                                urb->actual_length, urb->transfer_buffer);
1221
1222                        if (!tport->tp_is_open)
1223                                dbg("%s - port closed, dropping data",
1224                                        __func__);
1225                        else
1226                                ti_recv(&urb->dev->dev, tty,
1227                                                urb->transfer_buffer,
1228                                                urb->actual_length);
1229                        spin_lock(&tport->tp_lock);
1230                        tport->tp_icount.rx += urb->actual_length;
1231                        spin_unlock(&tport->tp_lock);
1232                }
1233                tty_kref_put(tty);
1234        }
1235
1236exit:
1237        /* continue to read unless stopping */
1238        spin_lock(&tport->tp_lock);
1239        if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) {
1240                urb->dev = port->serial->dev;
1241                retval = usb_submit_urb(urb, GFP_ATOMIC);
1242        } else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) {
1243                tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1244        }
1245        spin_unlock(&tport->tp_lock);
1246        if (retval)
1247                dev_err(dev, "%s - resubmit read urb failed, %d\n",
1248                        __func__, retval);
1249}
1250
1251
1252static void ti_bulk_out_callback(struct urb *urb)
1253{
1254        struct ti_port *tport = urb->context;
1255        struct usb_serial_port *port = tport->tp_port;
1256        struct device *dev = &urb->dev->dev;
1257        int status = urb->status;
1258
1259        dbg("%s - port %d", __func__, port->number);
1260
1261        tport->tp_write_urb_in_use = 0;
1262
1263        switch (status) {
1264        case 0:
1265                break;
1266        case -ECONNRESET:
1267        case -ENOENT:
1268        case -ESHUTDOWN:
1269                dbg("%s - urb shutting down, %d", __func__, status);
1270                tport->tp_tdev->td_urb_error = 1;
1271                wake_up_interruptible(&tport->tp_write_wait);
1272                return;
1273        default:
1274                dev_err(dev, "%s - nonzero urb status, %d\n",
1275                        __func__, status);
1276                tport->tp_tdev->td_urb_error = 1;
1277                wake_up_interruptible(&tport->tp_write_wait);
1278        }
1279
1280        /* send any buffered data */
1281        ti_send(tport);
1282}
1283
1284
1285static void ti_recv(struct device *dev, struct tty_struct *tty,
1286        unsigned char *data, int length)
1287{
1288        int cnt;
1289
1290        do {
1291                cnt = tty_insert_flip_string(tty, data, length);
1292                if (cnt < length) {
1293                        dev_err(dev, "%s - dropping data, %d bytes lost\n",
1294                                                __func__, length - cnt);
1295                        if (cnt == 0)
1296                                break;
1297                }
1298                tty_flip_buffer_push(tty);
1299                data += cnt;
1300                length -= cnt;
1301        } while (length > 0);
1302
1303}
1304
1305
1306static void ti_send(struct ti_port *tport)
1307{
1308        int count, result;
1309        struct usb_serial_port *port = tport->tp_port;
1310        struct tty_struct *tty = tty_port_tty_get(&port->port); /* FIXME */
1311        unsigned long flags;
1312
1313
1314        dbg("%s - port %d", __func__, port->number);
1315
1316        spin_lock_irqsave(&tport->tp_lock, flags);
1317
1318        if (tport->tp_write_urb_in_use)
1319                goto unlock;
1320
1321        count = kfifo_out(&tport->write_fifo,
1322                                port->write_urb->transfer_buffer,
1323                                port->bulk_out_size);
1324
1325        if (count == 0)
1326                goto unlock;
1327
1328        tport->tp_write_urb_in_use = 1;
1329
1330        spin_unlock_irqrestore(&tport->tp_lock, flags);
1331
1332        usb_serial_debug_data(debug, &port->dev, __func__, count,
1333                                        port->write_urb->transfer_buffer);
1334
1335        usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1336                           usb_sndbulkpipe(port->serial->dev,
1337                                            port->bulk_out_endpointAddress),
1338                           port->write_urb->transfer_buffer, count,
1339                           ti_bulk_out_callback, tport);
1340
1341        result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1342        if (result) {
1343                dev_err(&port->dev, "%s - submit write urb failed, %d\n",
1344                                                        __func__, result);
1345                tport->tp_write_urb_in_use = 0;
1346                /* TODO: reschedule ti_send */
1347        } else {
1348                spin_lock_irqsave(&tport->tp_lock, flags);
1349                tport->tp_icount.tx += count;
1350                spin_unlock_irqrestore(&tport->tp_lock, flags);
1351        }
1352
1353        /* more room in the buffer for new writes, wakeup */
1354        if (tty)
1355                tty_wakeup(tty);
1356        tty_kref_put(tty);
1357        wake_up_interruptible(&tport->tp_write_wait);
1358        return;
1359unlock:
1360        spin_unlock_irqrestore(&tport->tp_lock, flags);
1361        tty_kref_put(tty);
1362        return;
1363}
1364
1365
1366static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1367{
1368        unsigned long flags;
1369        int status;
1370
1371        status = ti_write_byte(tport->tp_tdev,
1372                tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1373                TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1374
1375        spin_lock_irqsave(&tport->tp_lock, flags);
1376        if (!status)
1377                tport->tp_shadow_mcr = mcr;
1378        spin_unlock_irqrestore(&tport->tp_lock, flags);
1379
1380        return status;
1381}
1382
1383
1384static int ti_get_lsr(struct ti_port *tport)
1385{
1386        int size, status;
1387        struct ti_device *tdev = tport->tp_tdev;
1388        struct usb_serial_port *port = tport->tp_port;
1389        int port_number = port->number - port->serial->minor;
1390        struct ti_port_status *data;
1391
1392        dbg("%s - port %d", __func__, port->number);
1393
1394        size = sizeof(struct ti_port_status);
1395        data = kmalloc(size, GFP_KERNEL);
1396        if (!data) {
1397                dev_err(&port->dev, "%s - out of memory\n", __func__);
1398                return -ENOMEM;
1399        }
1400
1401        status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
1402                (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
1403        if (status) {
1404                dev_err(&port->dev,
1405                        "%s - get port status command failed, %d\n",
1406                                                        __func__, status);
1407                goto free_data;
1408        }
1409
1410        dbg("%s - lsr 0x%02X", __func__, data->bLSR);
1411
1412        tport->tp_lsr = data->bLSR;
1413
1414free_data:
1415        kfree(data);
1416        return status;
1417}
1418
1419
1420static int ti_get_serial_info(struct ti_port *tport,
1421        struct serial_struct __user *ret_arg)
1422{
1423        struct usb_serial_port *port = tport->tp_port;
1424        struct serial_struct ret_serial;
1425
1426        if (!ret_arg)
1427                return -EFAULT;
1428
1429        memset(&ret_serial, 0, sizeof(ret_serial));
1430
1431        ret_serial.type = PORT_16550A;
1432        ret_serial.line = port->serial->minor;
1433        ret_serial.port = port->number - port->serial->minor;
1434        ret_serial.flags = tport->tp_flags;
1435        ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE;
1436        ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1437        ret_serial.closing_wait = tport->tp_closing_wait;
1438
1439        if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
1440                return -EFAULT;
1441
1442        return 0;
1443}
1444
1445
1446static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
1447        struct serial_struct __user *new_arg)
1448{
1449        struct serial_struct new_serial;
1450
1451        if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
1452                return -EFAULT;
1453
1454        tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
1455        tport->tp_closing_wait = new_serial.closing_wait;
1456
1457        return 0;
1458}
1459
1460
1461static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
1462{
1463        struct async_icount *icount;
1464        struct tty_struct *tty;
1465        unsigned long flags;
1466
1467        dbg("%s - msr 0x%02X", __func__, msr);
1468
1469        if (msr & TI_MSR_DELTA_MASK) {
1470                spin_lock_irqsave(&tport->tp_lock, flags);
1471                icount = &tport->tp_icount;
1472                if (msr & TI_MSR_DELTA_CTS)
1473                        icount->cts++;
1474                if (msr & TI_MSR_DELTA_DSR)
1475                        icount->dsr++;
1476                if (msr & TI_MSR_DELTA_CD)
1477                        icount->dcd++;
1478                if (msr & TI_MSR_DELTA_RI)
1479                        icount->rng++;
1480                wake_up_interruptible(&tport->tp_msr_wait);
1481                spin_unlock_irqrestore(&tport->tp_lock, flags);
1482        }
1483
1484        tport->tp_msr = msr & TI_MSR_MASK;
1485
1486        /* handle CTS flow control */
1487        tty = tty_port_tty_get(&tport->tp_port->port);
1488        if (tty && C_CRTSCTS(tty)) {
1489                if (msr & TI_MSR_CTS) {
1490                        tty->hw_stopped = 0;
1491                        tty_wakeup(tty);
1492                } else {
1493                        tty->hw_stopped = 1;
1494                }
1495        }
1496        tty_kref_put(tty);
1497}
1498
1499
1500static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush)
1501{
1502        struct ti_device *tdev = tport->tp_tdev;
1503        struct usb_serial_port *port = tport->tp_port;
1504        wait_queue_t wait;
1505
1506        dbg("%s - port %d", __func__, port->number);
1507
1508        spin_lock_irq(&tport->tp_lock);
1509
1510        /* wait for data to drain from the buffer */
1511        tdev->td_urb_error = 0;
1512        init_waitqueue_entry(&wait, current);
1513        add_wait_queue(&tport->tp_write_wait, &wait);
1514        for (;;) {
1515                set_current_state(TASK_INTERRUPTIBLE);
1516                if (kfifo_len(&tport->write_fifo) == 0
1517                || timeout == 0 || signal_pending(current)
1518                || tdev->td_urb_error
1519                || port->serial->disconnected)  /* disconnect */
1520                        break;
1521                spin_unlock_irq(&tport->tp_lock);
1522                timeout = schedule_timeout(timeout);
1523                spin_lock_irq(&tport->tp_lock);
1524        }
1525        set_current_state(TASK_RUNNING);
1526        remove_wait_queue(&tport->tp_write_wait, &wait);
1527
1528        /* flush any remaining data in the buffer */
1529        if (flush)
1530                kfifo_reset_out(&tport->write_fifo);
1531
1532        spin_unlock_irq(&tport->tp_lock);
1533
1534        mutex_lock(&port->serial->disc_mutex);
1535        /* wait for data to drain from the device */
1536        /* wait for empty tx register, plus 20 ms */
1537        timeout += jiffies;
1538        tport->tp_lsr &= ~TI_LSR_TX_EMPTY;
1539        while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
1540        && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error
1541        && !port->serial->disconnected) {
1542                if (ti_get_lsr(tport))
1543                        break;
1544                mutex_unlock(&port->serial->disc_mutex);
1545                msleep_interruptible(20);
1546                mutex_lock(&port->serial->disc_mutex);
1547        }
1548        mutex_unlock(&port->serial->disc_mutex);
1549}
1550
1551
1552static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1553{
1554        unsigned long flags;
1555
1556        spin_lock_irqsave(&tport->tp_lock, flags);
1557
1558        if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1559                tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1560
1561        spin_unlock_irqrestore(&tport->tp_lock, flags);
1562}
1563
1564
1565static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1566{
1567        struct urb *urb;
1568        int status = 0;
1569        unsigned long flags;
1570
1571        spin_lock_irqsave(&tport->tp_lock, flags);
1572
1573        if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1574                tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1575                urb = tport->tp_port->read_urb;
1576                spin_unlock_irqrestore(&tport->tp_lock, flags);
1577                urb->complete = ti_bulk_in_callback;
1578                urb->context = tport;
1579                urb->dev = tport->tp_port->serial->dev;
1580                status = usb_submit_urb(urb, GFP_KERNEL);
1581        } else  {
1582                tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1583                spin_unlock_irqrestore(&tport->tp_lock, flags);
1584        }
1585
1586        return status;
1587}
1588
1589
1590static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
1591        __u16 moduleid, __u16 value, __u8 *data, int size)
1592{
1593        int status;
1594
1595        status = usb_control_msg(tdev->td_serial->dev,
1596                usb_sndctrlpipe(tdev->td_serial->dev, 0), command,
1597                (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
1598                value, moduleid, data, size, 1000);
1599
1600        if (status == size)
1601                status = 0;
1602
1603        if (status > 0)
1604                status = -ECOMM;
1605
1606        return status;
1607}
1608
1609
1610static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
1611        __u16 moduleid, __u16 value, __u8 *data, int size)
1612{
1613        int status;
1614
1615        status = usb_control_msg(tdev->td_serial->dev,
1616                usb_rcvctrlpipe(tdev->td_serial->dev, 0), command,
1617                (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
1618                value, moduleid, data, size, 1000);
1619
1620        if (status == size)
1621                status = 0;
1622
1623        if (status > 0)
1624                status = -ECOMM;
1625
1626        return status;
1627}
1628
1629
1630static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
1631        __u8 mask, __u8 byte)
1632{
1633        int status;
1634        unsigned int size;
1635        struct ti_write_data_bytes *data;
1636        struct device *dev = &tdev->td_serial->dev->dev;
1637
1638        dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X",
1639                                        __func__, addr, mask, byte);
1640
1641        size = sizeof(struct ti_write_data_bytes) + 2;
1642        data = kmalloc(size, GFP_KERNEL);
1643        if (!data) {
1644                dev_err(dev, "%s - out of memory\n", __func__);
1645                return -ENOMEM;
1646        }
1647
1648        data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1649        data->bDataType = TI_RW_DATA_BYTE;
1650        data->bDataCounter = 1;
1651        data->wBaseAddrHi = cpu_to_be16(addr>>16);
1652        data->wBaseAddrLo = cpu_to_be16(addr);
1653        data->bData[0] = mask;
1654        data->bData[1] = byte;
1655
1656        status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0,
1657                (__u8 *)data, size);
1658
1659        if (status < 0)
1660                dev_err(dev, "%s - failed, %d\n", __func__, status);
1661
1662        kfree(data);
1663
1664        return status;
1665}
1666
1667static int ti_do_download(struct usb_device *dev, int pipe,
1668                                                u8 *buffer, int size)
1669{
1670        int pos;
1671        u8 cs = 0;
1672        int done;
1673        struct ti_firmware_header *header;
1674        int status = 0;
1675        int len;
1676
1677        for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
1678                cs = (__u8)(cs + buffer[pos]);
1679
1680        header = (struct ti_firmware_header *)buffer;
1681        header->wLength = cpu_to_le16((__u16)(size
1682                                        - sizeof(struct ti_firmware_header)));
1683        header->bCheckSum = cs;
1684
1685        dbg("%s - downloading firmware", __func__);
1686        for (pos = 0; pos < size; pos += done) {
1687                len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1688                status = usb_bulk_msg(dev, pipe, buffer + pos, len,
1689                                                                &done, 1000);
1690                if (status)
1691                        break;
1692        }
1693        return status;
1694}
1695
1696static int ti_download_firmware(struct ti_device *tdev)
1697{
1698        int status;
1699        int buffer_size;
1700        __u8 *buffer;
1701        struct usb_device *dev = tdev->td_serial->dev;
1702        unsigned int pipe = usb_sndbulkpipe(dev,
1703                tdev->td_serial->port[0]->bulk_out_endpointAddress);
1704        const struct firmware *fw_p;
1705        char buf[32];
1706
1707        dbg("%s\n", __func__);
1708        /* try ID specific firmware first, then try generic firmware */
1709        sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
1710            dev->descriptor.idProduct);
1711        if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) {
1712                buf[0] = '\0';
1713                if (dev->descriptor.idVendor == MTS_VENDOR_ID) {
1714                        switch (dev->descriptor.idProduct) {
1715                        case MTS_CDMA_PRODUCT_ID:
1716                                strcpy(buf, "mts_cdma.fw");
1717                                break;
1718                        case MTS_GSM_PRODUCT_ID:
1719                                strcpy(buf, "mts_gsm.fw");
1720                                break;
1721                        case MTS_EDGE_PRODUCT_ID:
1722                                strcpy(buf, "mts_edge.fw");
1723                                break;
1724                        case MTS_MT9234MU_PRODUCT_ID:
1725                                strcpy(buf, "mts_mt9234mu.fw");
1726                                break;
1727                        case MTS_MT9234ZBA_PRODUCT_ID:
1728                                strcpy(buf, "mts_mt9234zba.fw");
1729                                break;
1730                        case MTS_MT9234ZBAOLD_PRODUCT_ID:
1731                                strcpy(buf, "mts_mt9234zba.fw");
1732                                break;                  }
1733                }
1734                if (buf[0] == '\0') {
1735                        if (tdev->td_is_3410)
1736                                strcpy(buf, "ti_3410.fw");
1737                        else
1738                                strcpy(buf, "ti_5052.fw");
1739                }
1740                status = request_firmware(&fw_p, buf, &dev->dev);
1741        }
1742        if (status) {
1743                dev_err(&dev->dev, "%s - firmware not found\n", __func__);
1744                return -ENOENT;
1745        }
1746        if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
1747                dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
1748                return -ENOENT;
1749        }
1750
1751        buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1752        buffer = kmalloc(buffer_size, GFP_KERNEL);
1753        if (buffer) {
1754                memcpy(buffer, fw_p->data, fw_p->size);
1755                memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
1756                status = ti_do_download(dev, pipe, buffer, fw_p->size);
1757                kfree(buffer);
1758        } else {
1759                dbg("%s ENOMEM\n", __func__);
1760                status = -ENOMEM;
1761        }
1762        release_firmware(fw_p);
1763        if (status) {
1764                dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
1765                                                        __func__, status);
1766                return status;
1767        }
1768
1769        dbg("%s - download successful", __func__);
1770
1771        return 0;
1772}
1773